Scribd
Upload
40 views2 pages

5be84adc-64b2 - ZA - Screw Compressor Oil Synthetic 46 68 - EN-ZA

Sasol Screw Compressor Oil Synthetic 46/68 is a PAO-based lubricant designed for long-term use in rotary-vane and oil-flooded screw compressors, with a nominal operating range of -40°C to 205°C. It offers benefits such as reduced maintenance, compatibility with compressor components, resistance to oxidation, and lower fire hazards. The product is tested and approved by Knorr-Bremse AG and is available in 20L and 210L pack sizes.

Uploaded by

FARE Labs Unit-03
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views2 pages

5be84adc-64b2 - ZA - Screw Compressor Oil Synthetic 46 68 - EN-ZA

Sasol Screw Compressor Oil Synthetic 46/68 is a PAO-based lubricant designed for long-term use in rotary-vane and oil-flooded screw compressors, with a nominal operating range of -40°C to 205°C. It offers benefits such as reduced maintenance, compatibility with compressor components, resistance to oxidation, and lower fire hazards. The product is tested and approved by Knorr-Bremse AG and is available in 20L and 210L pack sizes.

Uploaded by

FARE Labs Unit-03
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Sasol Screw Compressor Oil Synthetic 46/68

SYNTHETIC COMPRESSOR OIL, GRADE 46/68


Description
Sasol Screw Compressor Oil Synthetic 46/68 is PAO-based compressor lubricant that was designed to
provide long-term lubrication of both rotary-vane and oil-flooded screw compressors.

Application
• Sasol Screw Compressor Oil Synthetic 46/68 is recommended for use in compressors such as:
• Oil flooded rotary screw compressors
• Oil flooded rotary vane compressors
• Reciprocating compressors

Nominal operating range for Sasol Screw Compressor Oil Synthetic 46/68 is -400C to 2050C.

Features and Benefits


• Fewer oil changes for reduced maintenance
• Compatible with compressor seals, gaskets, hoses, and air system components
• Resistance to oxidation with reduced compressor varnish and deposits
• Greatly reduces fire and explosion hazard
• Longer service life and greater protection of compressor components
• Lower oil consumption

Product Specifications
Tested and approved by Knorr-Bremse AG (Knorr Brake Corporation).

Page 1 of 2
Typical Characteristics
Property Units 46/68 ASTM IP
ASTM D2422
Viscosity D445 71
@ 100°C mm²/s 8.13
@ 40°C mm²/s 55.3
@-25 mm²/s 3672
Viscosity Index 116 D2270 226
Humidity % 0.02 D1744 313
Total Acid Number mgKOH/g 0.05 D664
Pour Point °C -66 D97 15
Flash Point (COC) °C 260 D92 36
Demulsibility @ 54°C oil/water/emulsion (min) ml 40/38/2(15) D1401
Density @ 15°C kg/m3 0.864 D4052 365
Evaporation, 22 hrs @ 210ºF % <1 D972
Copper Strip Corrosion 8 hrs @ 100 °C rating 1A D130
Four-Ball Wear, 1200 rpm, 75 0C, 40 kg, 1 hr, mm 0.6 D4172
Foaming Tendency, Sequence I, II, III Nil D892
Specific Gravity @ 15.60C 085 D1298

Storage and Handling


Use PVC, nitrile or other oil resistant gloves and protective clothing to prevent skin contact.
Where eye contact is a potential hazard, goggles should be worn.
Avoid temperatures exceeding 80°C.
Avoid temperatures above 80°C and strong oxidizing agents.
Ambient temperatures and atmospheric pressures normally encountered within buildings or roofed-
over outdoor storage areas are acceptable. Avoid entering areas where mists or vapours have built
up as a result of abnormal temperatures or pressures without the proper breathing equipment and
protective clothing.

Pack Information
Grades Product Code Pack Size Grades
46/68 20 L
210 L

Page 2 of 2

You might also like