MaxiDaptor Flange Adaptors
Datasheet 2/2
Technical Information
Working Pressure Rating Temperature Rating of Product
Water 16 bar EPDM -20°C to +90°C
Gas 6 bar Nitrile -20°C to +90°C
For use on applications with fluctuating and / or elevated
Vacuum Pressure temperatures (> 60°C) may require regular maintenance
Capable of accommodating a vacuum pressure of -0.7 bar to re-tighten the bolts and must be included in any
maintenance schedule.
Couplings & Flange Adaptors
Site Test Pressure
End Load Due to Internal Pressure
1.5 times working pressure for short duration (2 hours)
MaxiFit DOES NOT resist end load due to the internal pressure -
adequate external restraint must be provided to prevent pipe
Flange Drilling & Rated Pressure
pull out.
While drilling patterns defined for the flange adaptors are
compatible with the standards listed in the data sheet table, Approvals
the rated working pressure of the product is as noted above.
The following water contact materials used in MaxiDaptor
are approved for use with potable water:-
Angularity
Rilsan Nylon 11:
Flange Adaptors 3°
➤➤ WRAS, AS/NZS 4020, DVGW, W270, ACS & KIWA
The above are for when the product is on maximum pipe outside
diameters; can achieve larger ones with smaller pipe diameters. EPDM Gaskets:
➤➤ WRAS, AS/NZS 4020
Bolt Torque/Spanner
In addition to the above, MaxiFit range as a finished product has
M12; Torque 55-65Nm on every bolt KIWA certification verifying that the above products comply with
Spanner size A/F 19mm the requirements of the Water Supply (Water Fittings) Regulations
for England and Wales 1999, the Water Byelaws 2000, Scotland
and the Water Regulations Northern Ireland.
DN40 to DN300 MaxiFit has been independently tested
Wide Tolerance
by BSI to confirm it meets the requirements of BS EN 14525
(VC 669122)
Materials & Relevant Standards
End Ring & Adaptor Body/Centre Sleeve Tee Bolts/Bolts
Ductile Iron to BS EN 1563 Symbol EN GJS-450-10 Standard - Steel to BS EN ISO 898-1: property class 4.8
Option - Stainless Steel to BS EN ISO 3506-1:
Gasket grade A4 property class 5
EPDM compound Grade E to BS EN 681-1, Type WA, WC
Nuts
Nitrile compound to Grade G BS EN 682, Type G
Standard - Steel to BS EN 4190 Grade 4
Coating Option - Stainless Steel to BS EN ISO 3506-2:
Adaptor Body & End Ring: grade A4 property class 80
➤➤ Rilsan Nylon 11 to WIS 4-52-01 Part 1 Washers
Bolts & Nuts:
Stainless Steel to BS 1449:Part 2 Grade 304 S15
➤➤ Sheraplex to WIS 4-52-03
DR9550_03_2020_ISSUE 6
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors
or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
www.vikingjohnson.com Viking Johnson MaxiFit 53
MaxiDaptor Flange Adaptors
Datasheet 1/2
Flange Adaptor
L
A
M Maximum Flange
Setting Gap
S
Maximum Gap
MaxiDaptor Flange Adaptors
Size Overall Setting
MaxiFit Plus
øDia Bores Sleeve Flange Drilling Options Bolts Gasket
Available
Nom Range Length Gap Weight
(mm) (mm) Length x Thickness No.-Dia x Mould
Size (mm) (mm) (mm) (kg)
Nom Metric Drilling Nom Imperial Drilling Length No.
Min Max M S L (A) x (T) (DN) Specification (Inches) Specification Min Max
50 57.0 74.0 163.4 59.0 124.0 75.0 x 5.0 50 PN10 / 16 2" ANSI 125/150 20.0 40.0 4-M12 x 115 12392/1 2.7
2.5" BS10 Table ADE
65 63.0 85.0 196.9 75.0 124.0 75.0 x 5.0 60 PN10 / 16 2.5" ANSI 125/150 20.0 40.0 4-M12 x 115 12392/2 3.5 3
65 PN10 / 16
80 PN10 / 16 3” BS10 Table ADE
AS2129 CD ANSI 125/150
AS4087 16
80 85.0 107.0 202.5 101.0 124.0 75.0 x 5.0 80 PN10 / 16 3" ANSI 125/150 20.0 40.0 4-M12 x 115 12392/3 3.7 3
3.5" BS10 Table ADE
100 107.0 132.0 228.0 121.0 134.0 75.0 x 5.0 100 PN10 / 16 4" BS10 Table ADE 20.0 40.0 4-M12 x 125 12392/4 4.4 3
AS2129 CD AWWA C207 D
AS4087 16 ANSI 125/150
125 132.0 158.0 281.5 150.0 134.0 75.0 x 5.0 125 PN10 / 16 5" BS10 Table ADE 20.0 40.0 4-M12 x 125 12392/6 5.6
AS2129 CD
150 PN10 / 16 6" BS10 Table ADE
AWWA C207 D
ANSI 125/150
150 158.0 184.0 281.2 173.0 134.0 75.0 x 5.0 150 PN10 / 16 6" BS10 Table AD 20.0 40.0 4-M12 x 125 12392/7 6.0
AS4087 16 AWWA C207 D
AS2129 CD ANSI 125/150
175 189.0 212.0 336.5 202.0 133.0 75.0 x 5.0 150 PN10 / 16 25.0 40.0 4-M12 x 125 12392/9 8.3
200 PN10 / 16 8" BS10 Table AD
AS2129 CD
AS4087 16
200 218.0 244.0 337.8 225.0 134.0 75.0 x 5.0 200 PN10 / 16 8" BS10 Table AD 25.0 40.0 4-M12 x 125 12392/10 8.3
AS2129 CD AWWA C207 D
ANSI 125/150
225 243.0 269.0 401.5 252.0 144.0 85.0 x 5.0 250 PN10/16 10" BS10 Table E 25.0 50.0 6-M12 x 135 12392/11 10.9
250 266.0 295.0 402.1 277.0 146.0 85.0 x 5.0 250 PN10 / 16 10" BS10 Table E 25.0 50.0 6-M12 x 135 12392/12 11.4
DR9550_03_2020_ISSUE 6
300 315.0 349.0 457.8 329.0 155.0 100.0 x 5.0 300 PN10 / 16 25.0 60.0 6-M12 x 145 12392/14 14.8
AS2129 CD
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors
or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
52 Viking Johnson MaxiFit Telephone: +44 (0)1462 443322
