Datasheet

Huawei CloudEngine 6863E

Switch Datasheet
Huawei CloudEngine 6863E series switches have advanced
hardware architecture with 40GE/100GE uplink ports and
high-density 25GE access ports.

CloudEngine 6863E series can be used to build a scalable data center network platform in the
cloud computing era, or work as core or aggregation switches on campus networks.

www.huawei.com
Product Overview
Huawei CloudEngine 6863E series switches are next-generation 25GE access switches that provide high performance and high
port density on data center networks and high-end campus networks. The CloudEngine 6863E series have advanced hardware
architecture with 40GE/100GE uplink ports and high-density 25GE access ports. Using Huawei's VRP8 software platform,
CloudEngine 6863E series switches support extensive data center features and high stacking capabilities. In addition, the
CloudEngine 6863E series use a flexible airflow design (front-to-back or back-to-front).

CloudEngine 6863E series can work with CloudEngine 16800 or CloudEngine 12800 series data center core switches to build
elastic, virtual, and high-quality 40GE/100GE full-mesh networks, meeting requirements of cloud computing data centers.

CloudEngine 6863E series provide high-density 25GE access to help enterprises and carriers build a scalable data center
network platform in the cloud computing era. They can also work as core or aggregation switches on campus networks.

Product Appearance
CloudEngine 6863E series switches provide 48*25GE SFP28 ports and 6*40GE/100GE QSFP28 ports.

Product Characteristics
High-Density 25GE Access
 CloudEngine 6863E series provide up to 48 x 25GE ports, allowing for high-density 10GE/25GE server access and smooth
evolution.
 CloudEngine 6863E series provide up to 6 x 100GE QSFP28 ports. Each QSFP28 port can also be used as one 40GE
QSFP+ port, providing flexibility in networking. The uplink 40GE/100GE ports can be connected to CloudEngine 16800 or
CloudEngine 12800 series switches to build a non-blocking network platform.

Inter-device Link Aggregation, High Efficiency and Reliability

 CloudEngine 6863E series support multi-chassis link aggregation group (M-LAG), which enables links of multiple switches
to aggregate into one to implement device-level link backup.
 Switches in an M-LAG all work in active state to share traffic and back up each other, enhancing system reliability.
 Switches in an M-LAG can be upgraded independently. During the upgrade, other switches in the system take over traffic
forwarding to ensure uninterrupted services.
 M-LAG supports dual-homing to Ethernet, VXLAN, and IP networks, allowing for flexible networking.

ESI Multi-homing Access

CloudEngine 6863E series support RFC-compliant EVPN multi-homing solution. The Ethernet Segment Identifier (ESI) is used
to expand EVPN VXLAN gateways from active-active mode to multi-active mode. EVPN VXLAN gateways can work in active-
active mode to implement multi-homing access of servers (servers can be quad-homed to EVPN VXLAN gateways).

Virtualized Hardware Gateway, Enabling Quick Deployment

 CloudEngine 6863E series can connect to a cloud platform through open APIs, facilitating unified management of virtual
and physical networks.
 CloudEngine 6863E series can work with the industry's mainstream virtualization platforms. The virtualization function
protects investments because services can be deployed quickly without requiring network changes.
 The hardware gateway deployment enables fast service deployment without changing the customer network, providing
investment protection.

Huawei CloudEngine 6863E Switch Datasheet 2

 CloudEngine 6863E series support Border Gateway Protocol - Ethernet VPN (BGP-EVPN), which can run as the VXLAN
control plane to simplify VXLAN configuration within and between data centers.

Standard Interfaces, Enabling Openness and Interoperability

 CloudEngine 6863E series support NETCONF and can work with Huawei iMaster NCE-Fabric.
 CloudEngine 6863E series support Ansible-based automatic configuration and open-source module release, expanding
network functions and simplifying device management and maintenance.
 CloudEngine 6863E series can be integrated into mainstream SDN and cloud computing platforms flexibly and quickly.

ZTP, Implementing Automatic O&M

 CloudEngine 6863E series support Zero Touch Provisioning (ZTP). ZTP enables the CloudEngine 6863E series to
automatically obtain and load version files from a USB flash drive or file server, freeing network engineers from onsite
configuration and deployment. ZTP reduces labor costs and improves device deployment efficiency.
 ZTP provides built-in scripts through open APIs. Data center personnel can use a programming language they are familiar
with, such as Python, to centrally configure network devices.
 ZTP decouples the configuration time of new devices from the device quantity and area distribution, which improves
service provisioning efficiency.

FabricInsight-based Intelligent O&M

 The CloudEngine 6863E provides telemetry technology to collect device data in real time and send the data to Huawei
data center network analyzer iMaster NCE-FabricInsight. The iMaster NCE-FabricInsight analyzes network data based on the
intelligent fault identification algorithm, accurately displays the real-time network status, effectively demarcates and locates
faults in a timely manner, and identifies network problems that affect user experience, accurately guaranteeing user experience.

iMaster NCE-based Simplified Network Deployment

 CloudEngine 6863E series switches can interconnect with iMaster NCE-Fabric through standard protocols such as
NetConf and SNMP to implement network automatic management and control, providing more efficient and intelligent operation
methods, simplifying network management, and reducing the OPEX.

Flexible Airflow Design, Improving Energy Efficiency

Flexible front-to-back or back-to-front airflow design

 CloudEngine 6863E series use a strict front-to-back or back-to-front airflow design that isolates cold air channels from hot
air channels. This design improves heat dissipation efficiency and meets design requirements of data center equipment rooms.
 Air can flow from front to back or back to front depending on the fans and power modules that are used.
 Redundant power modules and fans can be configured to ensure service continuity.

Innovative energy-saving technologies

 CloudEngine 6863E series have innovative energy-saving chips and can measure system power consumption in real time.
The fan speed can be adjusted dynamically based on system consumption. These energy-saving technologies reduce O&M
costs and contribute to a greener data center.

Clear Indicators, Simplifying Maintenance

Clear indicators

 Port indicators clearly show the port status and port rate. The 100GE port indicators can show the states of all ports
derived from the 100GE ports.
 State and stack indicators on both the front and rear panels enable users to maintain the switch from either side.
 CloudEngine 6863E series support remote positioning. Remote positioning indicators enable users to easily identify the
switches they want to maintain in an equipment room full of devices.

Simple maintenance

 The management port, fans, and power modules are on the front panel, which facilitates device maintenance.

Huawei CloudEngine 6863E Switch Datasheet 3

 Data ports are located at the rear, facing servers. This simplifies cabling.

Licensing
CloudEngine 6863E supports Huawei IDN One Software (N1 mode for short) licensing mode. The CloudFabric N1 business
model combines the NCE controller, analyzer, and CloudEngine switch software for use in a range of common scenarios. This
simplifies transactions, provides customers with more functions and value, and protects their software investment with Software
License Portability.

Product Feature N1 Mandatory Software Packages N1 Add-on

Software
Packages

CloudEngine 6863E Foundation Advanced Premium Multi-cloud Multi-

series switch DC Value-added
Package

Basic software √ √ √

IPv6 √ √ √

VXLAN √ √ √

Lossless upgrade √ √ √

Telemetry √ √ √

NSH √ √

iMaster NCE-Fabric SDN automation √ √ √

controller
Basic intent functions √
(simulation and verification,
and network-wide
configuration rollback)

Multi-cloud mMulti-DC √
function

iMaster NCE- Basic network analysis √ √ √

FabricInsight functions of telemetry
analyzer
Network health ("1-3-5" √ √
intelligent O&M)

Value-added functions for √

network traffic analysis
(managing 100 VMs)

Version mapping Select one from three options. The Advanced It is used with the
software package contains functions from the Foundation,
Foundation software package. Advanced, or
Premium software
package.

For details about product function differences, refer to the product documentation.

Note: V200R005C20, V200R019C10, and later versions can support N1 business model.

Note: For detailed information of Huawei CloudFabric N1 business model, visit

https://e.huawei.com/en/material/networking/dcswitch/03a0e69bfa2c4f168323ba94a75f1f09

Huawei CloudEngine 6863E Switch Datasheet 4

Product Specifications
Note: This content is applicable only to regions outside Chinese mainland. Huawei reserves the right to interpret this content.

Functions and Features

Item CloudEngine 6863E-48S6CQ

Device virtualization iStack

M-LAG

ESI

Network virtualization VXLAN

BGP-EVPN

QinQ access VXLAN

Data center interconnect (DCI) VXLAN mapping, implementing interconnection between multiple DCI networks at Layer
2

SDN iMaster NCE-Fabric

Network convergence PFC and ECN

RDMA and RoCE (RoCE v1 and RoCE v2)

Programmability OPS programming

OpenFlow

Ansible-based automatic configuration and open-source module release

Traffic analysis NetStream

sFlow

VLAN Adding access, trunk, and hybrid interfaces to VLANs

Default VLAN

QinQ

MUX VLAN

MAC address Dynamic learning and aging of MAC address entries

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

MAC address limiting based on ports and VLANs

IP routing IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP

IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+

IP packet fragmentation and reassembly

IPv6 VXLAN over IPv6

IPv6 VXLAN over IPv4

IPv6 Neighbor Discovery (ND)

Path MTU Discovery (PMTU)

Huawei CloudEngine 6863E Switch Datasheet 5

Item CloudEngine 6863E-48S6CQ

TCP6, IPv6 ping, IPv6 tracert, IPv6 socket, UDP6, and raw IPv6

Multicast Multicast routing protocols such as IGMP, PIM-SM, and MBGP

IGMP snooping

IGMP proxy

Fast leaving of multicast member interfaces

Multicast traffic suppression

Multicast VLAN

Reliability Fine-grained microsegmentation isolation (IPv4 and IPv6)

Link Aggregation Control Protocol (LACP)

STP, RSTP, VBST, and MSTP

BPDU protection

Smart Link and multi-instance

Device Link Detection Protocol (DLDP)

Hardware-based Bidirectional Forwarding Detection (BFD)

VRRP, VRRP load balancing, and BFD for VRRP

BFD for BGP/IS-IS/OSPF/static route

BFD for VXLAN

NSH IETF-defined NSH (IPv4 and IPv6)

QoS Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information

ACL, CAR, re-marking, and scheduling

Queue scheduling modes such as PQ, DRR, and PQ+DRR

Congestion avoidance mechanisms, including WRED and tail drop

Traffic shaping

O&M iPCA

Network-wide path detection

Telemetry

ERSPAN+

Statistics on the buffer microburst status

VXLAN OAM: VXLAN ping and VXLAN tracert

Configuration and maintenance Console, Telnet, and SSH terminals

Network management protocols, such as SNMPv1/v2/v3

File upload and download through FTP and TFTP

BootROM upgrade and remote upgrade

Hot patches

Huawei CloudEngine 6863E Switch Datasheet 6

 Item CloudEngine 6863E-48S6CQ

User operation logs

Zero Touch Provisioning (ZTP)

Security and management Command line authority control based on user levels, preventing unauthorized users
from using commands

Defense against DoS attacks, ARP storms, and ICMP attacks

Port isolation, port security, and sticky MAC

Binding of the IP address, MAC address, port number, and VLAN ID

Authentication methods, including AAA, RADIUS, and HWTACACS

Remote Network Monitoring (RMON)

Performance and Scalability

Item CloudEngine 6863E-48S6CQ

Maximum number of MAC address 256K

entries

Maximum number of routes (FIB 256K/80K

IPv4/IPv6)

ARP table size 256K

Maximum number of VRFs 4096

IPv6 ND table size 80K

Maximum number of multicast routes 32K/2K

(multicast FIB IPv4/IPv6)

Maximum number of VRRP groups 1024

Maximum number of ECMP paths 128

Maximum number of ACLs 30K

Maximum number of broadcast domains 8K

Maximum number of BDIF interfaces 8K

Maximum number of virtual tunnel 2K

endpoints (VTEPs)

Maximum number of LAGs 1024

Maximum number of links in a LAG 128

Maximum number of MSTIs 64

Maximum number of VLANs where VBST 500

can be configured

Note: This specification may vary between different scenarios. Please contact Huawei for details.

Hardware Specifications
Item CloudEngine 6863E-48S6CQ

Physical features Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm

Huawei CloudEngine 6863E Switch Datasheet 7

Item CloudEngine 6863E-48S6CQ

Weight (excluding optical 5.7/7.8

transceivers, power modules,
and fan assemblies/including
AC power modules and fan
assemblies, excluding optical
transceivers, kg)

Switching capacity (Tbps) 3.6

Forwarding performance (Mpps) 940

10/25GE SFP28 ports 48

40/100GE QSFP28 ports 6

Management Out-of-band management port 1 x GE management interface

interface
Console port 1 x RJ45 interface

USB port 1

CPU Main frequency (GHz) 1.4

Number of cores 4

NOR flash 64 MB

NAND flash 4 GB

System System buffer 42 MB

Power supply Power modules 600 W AC

1000 W -48 V DC
1200 W 380 V HVDC

Rated voltage range (V) AC: 100 V to 240 V

DC: -48 V to -60 V
HVDC: 240 V to 380 V

Maximum voltage range (V) AC: 90 V to 290 V

DC: -38.4 V to -72 V
HVDC: 190 V to 400 V

Maximum input current AC 600 W: 100 V to 240 V 8 A

1000 W -48 V DC: -48 to 60 V 30A
1200 W 380 V HVDC: 190 V 8A

Typical power 226 W (100% traffic load, copper cable, normal temperature, dual
power modules)
261 W (100% traffic load, short-distance optical transceivers, normal
temperature, dual power modules)

Maximum power 384 W

Frequency (AC, Hz) 50/60

Heat dissipation Heat dissipation mode Air cooling

Number of fan trays 4

Heat dissipation airflow Front-to-back or back-to-front airflow

Huawei CloudEngine 6863E Switch Datasheet 8

 Item CloudEngine 6863E-48S6CQ

Maximum heat consumption 1311

(BTU/hour)

Environment Long-term operating 0°C to 40°C (0-1800 m)

specifications temperature (°C) The temperature decreases by 1°C each time the altitude increases
by 220 m.

Storage temperature (°C) -40°C to +70°C

Relative humidity 5% to 95%

Operating altitude (m) Up to 5000

Sound power at 27°C (dBA) Front-to-back airflow: < 67

Back-to-front airflow: < 66

Sound power at 40°C (dBA) Front-to-back airflow: < 84

Back-to-front airflow: < 83

Sound pressure at 27°C (dBA) Front-to-back airflow: 53 on average (maximum: 58)

Back-to-front airflow: 52 on average (maximum: 57)

Surge protection AC power supply protection: 6 kV in common mode and 6 kV in

differential mode
DC power supply protection: 4 kV in common mode and 2 kV in
differential mode

Reliability MTBF (year) 47.81

MTTR (hour) 1.95

Availability 0.9999962836

Note: For detailed information of CloudEngine 6800 hardware information, visit

https://support.huawei.com/enterprise/en/doc/EDOC1000019246?idPath=7919710%7C21782165%7C21782239%7C22318540
%7C7597815.

Safety and Regulatory Compliance

The following table lists the safety and regulatory compliance of CloudEngine 6800 series switches.

Certification Category Description

Safety  EN 60950-1
 EN 60825-1
 EN 60825-2
 UL 60950-1
 CSA-C22.2 No. 60950-1
 IEC 60950-1
 AS/NZS 60950-1
 GB4943

Electromagnetic Compatibility  EN 300386

(EMC)  EN 55032: CLASS A
 EN 55024
 IEC/EN 61000-3-2
 IEC/EN 61000-3-3

Huawei CloudEngine 6863E Switch Datasheet 9

 Certification Category Description
 FCC 47CFR Part15 CLASS A
 ICES-003: CLASS A
 CISPR 32: CLASS A
 CISPR 24
 AS/NZS CISPR32
 VCCI- CISPR32: CLASS A
 GB9254 CLASS A

Environment  2011/65/EU EN 50581

 2012/19/EU EN 50419
 (EC) No.1907/2006
 GB/T 26572
 ETSI EN 300 019-1-1
 ETSI EN 300 019-1-2
 ETSI EN 300 019-1-3
 ETSI EN 300 753 GR63

Note

EMC: electromagnetic compatibility

CISPR: International Special Committee on Radio Interference

EN: European Standard

ETSI: European Telecommunications Standards Institute

CFR: Code of Federal Regulations

FCC: Federal Communication Commission

IEC: International Electrotechnical Commission

AS/NZS: Australian/New Zealand Standard

VCCI: Voluntary Control Council for Interference

UL: Underwriters Laboratories

CSA: Canadian Standards Association

Supported MIBs
For details about the MIB information, visit
http://support.huawei.com/hedex/hdx.do?docid=EDOC1100020548&lang=en&idPath=7919710%7C21782165%7C21782239%7
C22318540%7C7597815.

Optical Transceivers and Cable

For details about the optical transceivers and cables information, visit
https://e.huawei.com/en/material/networking/dcswitch/f6d91cf16df0474998087676a33fd41e.

Ordering Information
Mainframe

CE6863E-48S6CQ CE6863E-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, without fan and power

Huawei CloudEngine 6863E Switch Datasheet 10

 Mainframe
modules)

CE6863E-48S6CQ-B CE6863E-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan
modules, port-side intake)

CE6863E-48S6CQ-F CE6863E-48S6CQ switch (48*25GE SFP28, 6*100GE QSFP28, 2*AC power modules, 4*fan
modules, port-side exhaust)

Fan Tray

Model Description Applicable Product

FAN-031A-F Fan box (F,FAN panel side intake) CE6863E-48S6CQ

FAN-031A-B Fan box (B,FAN panel side exhaust) CE6863E-48S6CQ

Power

Model Description Applicable Product

PAC600S12-CF 600W AC Power Module(Front to Back,Power CE6863- 48S6CQ

panel side intake)

PAC600S12-CB 600W AC Power Module(Back to Front, Power CE6863E- 48S6CQ

panel side exhaust)

PDC1000S12-DF 1000W DC Power Module (Front to CE6863E-48S6CQ

Back,Power panel side intake)

PDC1000S12-DB 1000W DC Power Module (Front to CE6863E-48S6CQ

Back,Power panel side exhaust)

PHD1K2S12-DB 1200W HVDC Power Module (Back to Front, CE6863E-48S6CQ

Power panel side exhaust)

Software

N1-CE68LIC-CFFD N1-CloudFabric Foundation SW License for CloudEngine 6800

N1-CE68CFFD-SnS1Y N1-CloudFabric Foundation SW License for CloudEngine 6800-SnS-1 Year

N1-CE68LIC-CFAD N1-CloudFabric Advanced SW License for CloudEngine 6800

N1-CE68CFAD-SnS1Y N1-CloudFabric Advanced SW License for CloudEngine -SnS -1 Year

N1-CE68LIC-CFPM N1-CloudFabric Premium SW License for CloudEngine 6800

N1-CE68CFPM-SnS1Y N1-CloudFabric Premium SW License for CloudEngine 6800 -SnS-Year

N1-CE-F-LIC-MDCA N1-CloudEngine Data Center Switch Multi-cloud Multi-DC Value-added Package - Fixed

N1-CEFMDCA -SnS1Y N1-CloudEngine Data Center Switch Multi-cloud Multi-DC Value-added Package, Per Fixed
device -SnS-Year

Networking and Application

Data Center Applications
On a typical data center network, CloudEngine 6863 switches work as TOR switches and connect to CloudEngine 16800 or
CloudEngine 12800 or CloudEngine 8800 switches using 40GE/100GE ports, building an end-to-end 100GE full-mesh network.

Huawei CloudEngine 6863E Switch Datasheet 11

The core and TOR switches use fabric technologies such as VXLAN to build a non-blocking large Layer 2 network, which allows
for large-scale VM migration and flexible service deployment.

Note: VXLAN can also be used on campus networks to support flexible service deployment in different service areas.

Huawei CloudEngine 6863E Switch Datasheet 12

 Copyright © Huawei Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of
Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or
part of the products, services and features described in this document may not be within the purchase scope or the usage
scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are
provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not
constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China

Website:www.huawei.com

Huawei CloudEngine 6863E Switch Datasheet 13