MYC-Y7Z010/20-V2 CPU Module

Overview

 667MHz Xilinx XC7Z010/20 ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
 512MB DDR3 SDRAM (2 x 256MB, 32-bit), 4GB eMMC, 16MB QSPI Flash
 On-board Gigabit Ethernet PHY
 1.27mm pitch 180-pin Stamp Hole Expansion Interface
 Ready-to-Run Linux 4.14
 Supports -40 to +85 Celsius Extended Temperature Operation for Industrial Applications

1/8 MYIR Electronics Limited www.myirtech.com

The MYC-Y7Z010/20-V2 CPU Module is an industrial-grade System-on-Module (SoM) based on Xilinx
Zynq-7000 family SoC available for either the XC7Z020 or XC7Z010 version. It has integrated the Zynq-7020 or
Zynq-7010 device, 512MB DDR3 SDRAM, 4GB eMMC, 16MB quad SPI Flash, a Gigabit Ethernet PHY and external
watchdog on board and provides 1.27mm 180-pin stamp-hole (Castellated-Hole) expansion interface to allow a
large number of I/O signals for ARM peripherals and FPGA I/Os to be extended to your base board. The module is
ready to run Linux and supports wide working temperature ranging from -40 to +85 Celsius which is ideal for
industrial embedded applications.

MYC- Y7Z010/20-V2 CPU Module

MYIR provides a development board MYD-Y7Z010/20-V2 for evaluating the MYC-Y7Z010/20-V2 CPU Module,
which employs the MYC-Y7Z010/20-V2 as the controller board by populating the CPU Module on its base board
through 1.27mm pitch 180-pin stamp-hole (Castellated-Hole) interface. The base board has extended a rich set of
peripheral interfaces including serial ports, USB Host port, three Gigabit Ethernet ports, CAN, TF card slot, JTAG,
etc. One 2.54mm pitch 2 x 25-pin expansion header is on the base board to let more GPIOs available for further
extension.

MYD-Y7Z010/20-V2 Development Board

2/8 MYIR Electronics Limited www.myirtech.com

Hardware Specification

The Zynq®-7000 All Programmable SoC (AP SoC) family integrates the software programmability of an
ARM®-based processor with the hardware programmability of an FPGA, enabling key analytics and hardware
acceleration while integrating CPU, DSP, ASSP, and mixed signal functionality on a single device. Consisting of
single-core Zynq-7000S and dual-core Zynq-7000 devices, the Zynq-7000 family is the best price to
performance-per-watt, fully scalable SoC platform for your unique application requirements.

Zynq-7000S

Zynq-7000S devices feature a single-core ARM Cortex™-A9 processor mated with 28nm Artix®-7 based
programmable logic, representing the lowest cost entry point to the scalable Zynq-7000 platform. It includes Zynq
Z-7007S, Z-7012S and Z-7014S which target smaller embedded designs. Available with 6.25Gb/s transceivers and
outfitted with commonly used hardened peripherals, the Zynq-7000S delivers cost-optimized system integration
ideal for industrial IoT applications such as motor control and embedded vision.

Zynq Z-7000S SoC Device Block Diagram

3/8 MYIR Electronics Limited www.myirtech.com

Zynq-7000

Zynq-7000 devices are equipped with dual-core ARM Cortex-A9 processors integrated with 28nm Artix-7 or
Kintex®-7 based programmable logic for excellent performance-per-watt and maximum design flexibility. With
up to 6.6M logic cells and offered with transceivers ranging from 6.25Gb/s to 12.5Gb/s, Zynq-7000 devices enable
highly differentiated designs for a wide range of embedded applications including multi-camera driver’s
assistance systems and 4K2K Ultra-HDTV.

Zynq Z-7000 SoC Device Block Diagram

4/8 MYIR Electronics Limited www.myirtech.com

 Zynq-7000 SoC Device Table

Mechanical Parameters
• Dimensions: 75mm x 50mm (10-layer PCB design)
• Power supply: 5V
• Working temp.: -40~85 Celsius (industrial grade)

SoC
• Xilinx XC7Z010-1CLG400I (Zynq-7010) / XC7Z020-2CLG400I (Zynq-7020) SoC
- ARM® Cortex™-A9 MPCore processor
667MHz dual-core processor (up to 866MHz, for XC7Z010 or XC7Z020)
- Integrated Artix-7 class FPGA subsystem
with 85K logic cells, 53,200 LUTs, 220DSP slices (for XC7Z020)
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
- NEON™ & Single / Double Precision Floating Point for each processor
- Supports a Variety of Static and Dynamic Memory Interfaces

Memory
• 512MB DDR3 SDRAM (256MB*2）
• 4GB eMMC
• 16MB QSPI Flash

5/8 MYIR Electronics Limited www.myirtech.com

Peripherals and Signals Routed to Pins
• 10/100/1000M Ethernet PHY (YT8521SH)
• External watchdog
• Three LEDs
- One red LED for power indicator
- One green LED for FPGA program done indicator
- One green user LED for system indicator
• 1.27mm pitch 180-pin Stamp Hole Expansion Interface brings out below signals:
- One Gigabit Ethernet
- One USB
- Two Serial ports
- Two I2C
- Two CAN BUS
- Two SPI
* Serial ports, I2C, CAN and SPI signals in PS part can be implemented through PL pins via Emio.
- Two ADC (16-channel ADC brought out through PL pins)
- One SDIO

Function Block Diagram

MYC-Y7Z010/20-V2 Function Block Diagram

Dimension Chart

Dimensions of MYC-Y7Z010/20-V2

6/8 MYIR Electronics Limited www.myirtech.com

Software Features

The MYC-Y7Z010/20-V2 CPU Module is capable of running Linux 4.14. MYIR provides software package in
product disk along with the goods delivery. The software package features as below:

Item Features Description Remark

Cross gcc version 6.2.1 20161114

gcc 6.2.1
compiler (Linaro GCC Snapshot 6.2-2016.11)

Boot BOOT.BIN First boot program including FSBL, bitstream Source code provided

program u-boot Secondary boot program Source code provided

Linux Kernel Linux 4.14 Customized kernel for MYD-Y7Z010/20-V2 Source code provided

USB Host USB Host driver Source code provided

Ethernet Gigabit Ethernet driver Source code provided

MMC/SD/TF MMC/SD/TF card driver Source code provided

CAN CAN driver Source code provided

LCD Controller XYLON LCD driver Source code provided

HDMI HDMI (SII902X chip) driver Source code provided

Button Button driver Source code provided

Drivers UART UART driver Source code provided

LED LED driver Source code provided

GPIO GPIO driver Source code provided

QSPI QSPI Flash W25Q128FW driver Source code provided

RTC DS3231 RTC driver Source code provided

Resistive Touch TSC2007 resistive touch screen driver Source code provided

Capacitive Touch FT5X0X capacitive touch screen driver Source code provided

ADC ADC driver Source code provided

Ramdisk Ramdisk system image

File System
Rootfs.tar Tar file

Linux Software Package Features

7/8 MYIR Electronics Limited www.myirtech.com

Order Information

Item Part No. Packing List

MYC-Y7Z010-V2-4E512D-667-I
 One MYC-Y7Z010-V2 CPU Module
(for XC7Z010-1CLG400I)
MYC-Y7Z010/20-V2 CPU Module
MYC-Y7Z020-V2-4E512D-766-I
 One MYC-Y7Z020-V2 CPU Module
(for XC7Z020-2CLG400I)

MYD-Y7Z010-V2-4E512D-667-I
(for XC7Z010-1CLG400I)
 One MYD-Y7Z010/20-V2 Board
 One 1.5m cross Ethernet cable
MYD-Y7Z010/20-V2
 One DB9 converting cable
Development Board
 One Power converting cable
MYD-Y7Z020-V2-4E512D-766-I  One 12V/1.25A Power adapter
(for XC7Z020-2CLG400I)

MYIR Tech Limited

Headquarter Address: Room 04, 6th Floor, Building No.2, Fada Road, Yunli Smart Park, Bantian, Longgang District,
Shenzhen, Guangdong, China 518129

Factory Address: Room 201, Block C, Shengjianli Industrial Park, Dafu Industrial Zone, Guanlan, Longhua District,
Shenzhen, 518110, China

Website: www.myirtech.com
Email: [email protected]
Tel: +86-755-22984836

8/8 MYIR Electronics Limited www.myirtech.com