Scribd
Upload
47 views1 page

SAFETY DATA SHEET (CF 16) SP

Dispelair CF 16 is a foam control agent for water-based paints and adhesives, certified to ISO 9001, with a shelf life of at least 6 months. It is a non-ionic, amber opaque liquid that forms a reasonable dispersion and is effective over a wide range of pH and temperature. The product is compliant with various national inventories and indirect food contact regulations, and should be stored in closed containers at temperatures between 5ºC and 30ºC.

Uploaded by

Myo Myint Aung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views1 page

SAFETY DATA SHEET (CF 16) SP

Dispelair CF 16 is a foam control agent for water-based paints and adhesives, certified to ISO 9001, with a shelf life of at least 6 months. It is a non-ionic, amber opaque liquid that forms a reasonable dispersion and is effective over a wide range of pH and temperature. The product is compliant with various national inventories and indirect food contact regulations, and should be stored in closed containers at temperatures between 5ºC and 30ºC.

Uploaded by

Myo Myint Aung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Quality Assurance Certified to ISO 9001

Specification

DISPELAIR CF 16
FOAM CONTROL AGENT FOR WATER BASED PAINTS AND ADHESIVES

CHEMICAL TYPE : MINERAL HYDROCARBON AND SURFACE ACTIVE AGENTS


IONIC CHARGE : NON IONIC
PHYSICAL SPECIFICATION:
1. APPEARANCE : AMBER OPAQUE LIQUID.
2. WATER MISCIBILITY: FORMS A REASONABLE DISPERSION
3. FLUIDITY : VISCOSITY NOT GREATER THAN 1000 cPs @ 20oC DIN 53019 100rpm
4. CLEANLINESS : NO PARTICLES AFTER SCREENING THROUGH A 400 MICRON APERTURE SCREEN.
STORAGE:
Store in closed containers. For optimum stability store between 5ºC and 30ºC.
STABILITY:
Product has a shelf life of at least 6 months.
However, after 6 months phasing may occur. Remixing will ensure the product is suitable for use.
PACKAGING:
180 kg / drum
PURPOSE:
Dispelair CF 16 is an effective and economical foam control agent for most emulsion paints and adhesives. It is
effective over a wide range of pH and temperature.
APPLICATION:
Normally used as delivered. The amount required depends of course on the particular application. In most cases
addition should be split between the pigment grind and the letdown. A typical addition level would be between
0.1% and 0.5% in total, depending on the severity of the foam problem. However, in all cases levels should be
optimised by trial.
OTHER INFORMATION:
NATIONAL INVENTORY STATUS:
The components of Dispelair CF 16 are listed on the following inventories:
Europe (EINECS) : Yes
USA (TSCA) : Yes
Canada (DSL) : Yes
Australia (AICS) : Yes
Korea (ECL) : Yes
Japan (ENCS) : Yes
Philippines (PICCS) : Yes
China (SEPA) : Yes
FDA STATUS:
Dispelair CF 16 complies with the following indirect food contact regulations listed in 21CFR:
175.105, 176.210
Please contact the Technical Department if other FDA or BfR compliances are required. N.B The above
information is given in good faith but without warranty. We cannot accept liability for any damage, loss or
patent infringement resulting from the use of this information.

You might also like