SSC/2
The SSC/2 has been especially developed
for the speed control of high-efficiency
pumps in standard solar and heating
systems.
It is equipped with two PWM outputs and an
additional input for a VFD Grundfos Direct
SensorTM that enables a precise heat quantity
measurement.
The commissioning menu will lead you
through the most important adjustments for
the initial configuration in only eight steps.
HE pump control
Heat quantity measurement with
VFD Grundfos Direct SensorTM
■ For the speed control of high-efficiency pumps
■ 1 input for a VFD Grundfos Direct SensorTM
■ Heat quantity measurement
■ Commissioning menu
■ 10 basic system layouts to choose from
■ Function control
■ Optional thermal disinfection function
■ Drainback option
Examples Technical data
62
30
Solar system with 1 store Solar system with 1 store Solar system with 1 store and Solar system with store
and heat exchange control thermostatic afterheating loading in layers
172
46
Solar system with 2 stores, Solar system with 2 stores, Solar system with east-/west Solar system with 1 store
valve logic pump logic collectors and 1 store and solid fuel boiler
110
Solar system with heating Solar system with 1 store and Solar drainback system* Solar drainback system with
circuit return preheating heat dump booster*
Inputs: 4 Pt1000 temperature sensors, 1 VFD
* Application examples Grundfos Direct SensorTM
Outputs: 2 semiconductor relays, 2 PWM outputs
PWM frequency: 512 Hz
PWM voltage: 10.5 V
Electrical connection Switching capacity:
1 (1) A 240 V~ (semiconductor relay)
T2A
100 ... 240 V~
50-60 Hz Total switching capacity: 2 A 240 V~
PWM 1 IP 20
R1 N L
PWM 2 R1 1 (1) A 240 V~ 18 19 20
Power supply: 100 ... 240 V~ (50 ... 60 Hz)
R2 1 (1) A 240 V~
VFD
Temp. Sensor Pt1000
N R2 N Supply connection: type Y attachment
S1 S2 S3 S4 VBus
1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17
Standby: 0.59 W
Mode of operation: type 1.C.Y action
Rated impulse voltage: 2.5 kV
Data interface: VBus®
VBus® current supply: 35 mA
Functions: function control, operating hours coun-
ter, tube collector function, thermostat function,
speed control and heat quantity measurement
Accessories
Housing: plastic, PC-ABS and PMMA
KM1 Communication module Moisture-proof housing Mounting: wall mounting, mounting into patch
For visualisation via VBus.net, panels is possible
Moisture-proof housing for
incl. network cable, mains controller installation outdoors or Indication / Display: System-Monitoring-Display for
adapter and VBus® cable pre- in highly humid locations (without visualisation of systems, 16-segment and 7-segment
connected controller) display, 8 symbols for indication of system status
Price bracket A | Article no.: 180 011 30 Operation: 3 push buttons at the front
Price bracket B | Article no.: 290 028 70
Ingress protection: IP 20 / EN 60529
Protection class: I
VFD Grundfos Direct SensorTM VBus® / USB interface adapter Ambient temperature: 0 ... 40 °C
Digital sensors in different PC connection kit for control- Pollution degree: 2
versions lers with VBus® incl. Service
CD Dimensions: 172 x 110 x 46 mm
Price bracket B | Article no.: 180 008 50
SP10 AM1
Sensor overvoltage protection Alarm module for signalling system
failures
Price bracket A | Article no.: Price bracket B | Article no.:
180 110 70 180 008 70
