Datasheet: uni 815 Single Hinge
EN
Slat Top Stainless Steel Chain
Series uni 815 Type Single Hinge
TRAVEL T
Slat Top Stainless Steel Chain
Straight running chain
Pitch: 38.1 mm (1.50 in)
Backflex radius:
STANDARD
W 150.0 mm (5.91 in)
Q G
Standard shipping lengths:
coils of 80 links
PD = 3.048 m (10.0 ft)
L
H
P E
E G H L P Q T PD
RUNNING
mm in mm in mm in mm in mm in mm in mm in mm in
6.4 0.25 44.5 1.75 9.9 0.39 6.5 0.26 38.1 1.50 42.5 1.67 3.0 0.12 1.6 0.06
STANDARD
Width (W) Weight Permissible Surface
STRAIGHT
Chain Pin
tensile strength
material material*
mm in kg/m lb/ft N/lbf Roughness Hardness
K250 63.5 2.50 2.25 1.51
K325 82.6 3.25 2.65 1.78
AISI 304 AISI 304
K400 101.6 4.00 3.00 2.02 (Work hardened (Work hardened
2250 / 506 Crome-nickel 18/8 Crome-nickel 18/8 < 0.5 µm 26 HRC
PITCH 38.1 MM/1.50 IN
K450 114.3 4.50 3.30 2.22 austenitic austenitic
Stainless Steel) Stainless Steel)
K600 152.4 6.00 4.20 2.82
K750 190.5 7.50 5.10 3.43
* Chains with special hardened pin (HP) for additional wear resistance and higher corrosion strength are made to order.
Accessories
Rubber Top
X
X Z X Y
Rubber
Width
material
mm in mm in mm in
K325 06 K 77.0 3.03 30.0 1.18 2.0 0.08
ZZ
K450 06 K 108.0 4.25 27.0 1.06 2.0 0.08
Non stock item. Contact Customer
Service for delivery time.
K600 06 K 146.0 5.75 30.0 1.18 2.0 0.08
YY K750 06 K 146.0 5.75 30.0 1.18 2.0 0.08
Datasheet: uni 815 Single Hinge
Sprocket
Max. ø bore
Min. ø bore
Dimension
Dimension
diameter
diameter
diameter
Machined PA6 N
Overall
Molded Cast Iron
Molded PA6 LG
Pitch
No. of teeth
Hub
B
mm in mm in mm in mm in mm in mm in mm in
Z13 82.0 3.22 79.0 3.11 20 0.8 40 1.6 n/a n/a 29.8 1.17 48.1 1.89
Z19 117.3 4.62 117.0 4.61 20 0.8 40 1.6 58 2.28 58.7 2.31 64.5 2.54
Z21 129.2 5.09 130.0 5.12 20 0.8 40 1.6 58 2.28 65 2.56 70.5 2.78
Z23 141.2 5.56 142.0 5.59 20 0.8 40 1.6 58 2.28 71.2 2.80 76.5 3.01
Z25 153.2 6.03 155.0 6.10 20 0.8 40 1.6 58 2.28 77.4 3.05 82.5 3.25
Z27 165.2 6.50 167.0 6.57 20 0.8 70 2.8 n/a n/a 83.6 3.29 88.5 3.48
Z29 177.2 6.98 179.0 7.05 20 0.8 70 2.8 n/a n/a 89.8 3.54 94.6 3.72
Z31 189.3 7.45 192.0 7.56 20 0.8 70 2.8 n/a n/a 95.9 3.78 100.6 3.96
Two part sprocket
Max. ø bore
Min. ø bore
Dimension
Dimension
diameter
diameter
diameter
Overall
Molded PA6 LG
Pitch
No. of teeth
Hub
B
mm in mm in mm in mm in mm in mm in mm in
Z19 117.3 4.62 117.0 4.61 20.0 0.79 40.0 1.57 58.0 2.28 58.7 2.31 64.5 2.54
Z21 129.2 5.09 130.0 5.12 20.0 0.79 40.0 1.57 58.0 2.28 65.0 2.56 70.5 2.78
Z23 141.2 5.56 142.0 5.59 20.0 0.79 40.0 1.57 58.0 2.28 71.2 2.80 76.5 3.01
Z25 153.2 6.03 155.0 6.10 20.0 0.79 40.0 1.57 58.0 2.28 77.4 3.05 82.5 3.25
Molded sprocket Cast iron sprocket Machined sprocket Two part sprocket Non standard material and color:
See uni Material and Color Overview.
B Please ensure that sufficient size
uni 815 Single Hinge/160624
shaft and keyway are chosen for
corresponding load.
A
Other sprocket sizes are available upon request
Width of tooth: 42.3 mm/1.67 in
Width of sprocket: 42.3 mm/1.67 in
uni Retainer Rings: See uni Retainer Ring data sheet
uni Idler: See uni Idler data sheet
uni Guide Rings can be mounted on cast iron and machined sprockets. See uni Guide Rings data sheet
Expert advice, quality solutions Ammeraal Beltech Modular A/S
Transmission Belts
Conveyor Belts
Seamless Belts
and local service Hjulmagervej 21
Modular Belts
Timing Belts
Fabrication
for all your belting needs DK-7100 Vejle
& service
www.ammeraalbeltech.com
T +45 7572 3100
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect F +45 7572 3348
use of the above stated information. This information replaces previous information. All activities performed and services rendered by [email protected]
Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. www.unichains.com
