GRAY HOMES CONSTRUCTION

BILL OF QUANTITIES

FOR THE

PROPOSED HOUSE

AT

33732 ERASMUS PARK

Item Description Uom Quantity Rate Amount

BILL NO.1 : FOUNDATIONS

SUPPLEMENTARY PREAMBLES

Foundations have been measured to top of surface bed.

SITE CLEARANCE ETC

Site clearance

1 Clear site of all rubbish, bushes, shrubs, undergrowth,

hedges, small trees, stumps, roots, etc. m² 385 1.20 462.00

EXCAVATION ETC

Pumping

2 Keeping excavations free of storm, surface water and

mud by pumping and bailing. Item 1 INC

3 Excavate over site to remove vegetable soil average 150

mm deep and deposit on site not exceeding 100 mm
metres. m² 385 1.50 577.50

4 Redig topsoil from heap and spread and level where

directed. m³ 35 6.00 210.00

5 Reduced levels under floors not exceeding 300mm deep m³ 70 6.00 420.00

Excavation in pickable material for:

6 Surface trenches not exceeding 2 metres deep. m³ 80 6.00 480.00

7 Extra over excavation in pickable material for excavation

in hard pickable material. m³ 8 14.00 112.00

8 Ditto for excavation in rock. m³ 4 120.00 480.00

9 Level and compact bottoms of trenches. m² 100 1.25 125.00

Planking and strutting:

10 Allow for maintaining and supporting sides of all

excavations and making good all slips. m² 240 0.40 96.00

Disposal

11 Redig from spoil heap, return, fill and well compact

selected excavated material around foundations. m³ 45 6.50 292.50

12 Redig from spoil heap and cart off site m³ 40 16.00 640.00

Formation:
13 Scarify ground to a depth of 150 mm and compact to 95%
H.C.E. density. m² 180 1.25 225.00

14 Selected excavated material in filling to make up levels

under floors and compact to 93% H.C.E. m³ 30 19.00 570.00

15 Approved imported inert granular material, spread, level

and compact in maximum 150 mm layers to make up
levels under floors to 95% H.C.E. density. m³ 54 28.00 1,512.00

Sundries

16 150 Micron black polythene sheeting well lapped at joints

and junctions including all cutting and waste (measured
nett) laid over filling to receive concrete. m² 180 0.90 162.00

Termites

17 Termite treatment as described to top of filling and walls. m² 180 1.00 180.00

PLAIN CONCRETE

Vibrated reinforced concrete (grade 30 - 20mm stone) in

18 Footings m³ 26 190.00 4,940.00

19 Surface beds and thickenings. m³ 20 190.00 3,800.00

Sundries.

20 Strike off and cure top of concrete. m² 180 0.50 90.00

REINFORCEMENT

Welded fabric reinforcement of approved manufacture

including all cutting, tying, placing in position with
necessary temporary supports and minimum 300mm laps
both ways (meausred nett).

21 Ref : S193 (mass of 1.93kg /square metre ) in top

reinforcement to surface beds and thickenings. m² 180 4.80 864.00

BRICKWORK

Brickwork in extra hard burnt common bricks in cement

morta as described:

22 One brick wall. m² 100 42.00 4,200.00

23 Half brick wall. m² 60 21.00 1,260.00

REINFORCEMENT.

Brickforce lapped at joints and junctions and building in as

the work proceeds (measured nett).

24 Ref . C2 in one brick walls . m 635 0.15 95.25

 Foundations Bill Total 21,793.25

BILL NO.2 : CONCRETE, FORMWORK AND

REINFORCEMENT

STRUCTURAL CONCRETE

Vibrated reinforced concrete (grade 30 - 20mm stone) in

25 Beams. m³ 8 190.00 1,520.00

26 Roof slab m³ 11 190.00 2,090.00

27 Staircase m³ 5 190.00 950.00

Sawn formwork as described:

28 Beams m² 40 22.00 880.00

29 Roof slab m² 39 32.00 1,248.00

30 Staircase m² 12 22.00 264.00

REINFORCEMENT

Steel bar reinforcement including all bending ,hooked

ends, binding wire and temporary supports .

High yield deformed bars.

31 Exceeding 8 mm and not exceeding 30 mm diameter bars Kg 2990 1.80 5,382.00

PRECAST CONCRETE

Precast concrete (Grade 20 - 20 mm Stone) finished fair

on all exposed surfaces.

32 Rainwater dripstone 450 mm wide and 150 mm thick and

760 mm long with stop segmental channel formed in top
and place in position. No 8 8.00 64.00

33 320 x 80 mm (Extreme) twice weathered and twice

throated coping cast in suitable lengths, hoisted, bedded
and pointed in cement mortar on top of 230 mm brick wall. m 30 11.00 330.00

34 1300mm precast lintels no 11 18.00 198.00

TESTING

35 Allow for carrying out slump tests when directed as

prescibed Item 1 480.00 480.00

Concrete Bill Total 13,406.00

BILL NO.3 : BRICKWORK

BRICKWORK
 Brickwork of Common bricks in cement mortar as
described

36 Half brick walls m² 145 21.00 3,045.00

37 One brick walls m² 245 42.00 10,290.00

Sundries

38 230 x 150 mm pressed cement louvred vermin proof

ventilator and building into brickwork. No 24 0.90 21.60

39 Rake out joints of brickwork for and point sheet iron

flashings m 90 2.80 252.00

DAMP PROOF COURSE

One layer of three ply bituminous felt sheeting as damp

proof course as described well lapped at joints and
junctions ( measured nett ) .

40 On walls. m² 35 1.90 66.50

41 Stepped under cills. m² 10 1.90 19.00

REINFORCEMENT

Brickforce lapped at joints and junctions and building in as

the work proceeds (measured nett).

42 Ref. C1 in half brick walls. m 568 0.15 85.26

43 Ref. C2 in one brick walls. m 960 0.15 144.06

BUILDING IN

44 Set up in position , cross brace and build in pressed steel

door frame not exceeding 5 square metres . No 12 5.00 60.00

45 Set in position and build in anodized aluminium composite

doors and windows with pressed aluminium mullions and
pressed aluminium external cill including bedding same
solid including covering up down exceeding 5 metres and
not exceeding 10 square matres No 16 5.00 5.00

46 75 x 230 x 50 mm Bull nosed external cill to match. m 30 4.00 120.00

Brickwork Bill Total 14,108.42

BILL NO.4 : ROOF COVERINGS

SHEET ROOF COVERING FIXED IN STRICT

ACCORDANCE WITH THE MANUFACTURER'S
INSTRUCTIONS INCLUDING FIXING AND SQUARE
CUTTING (MEASURED NETT)

47 Concrete Roof Tiles m² 260 13.50 3,510.00

48 Alucusion m² 260 11.00 2,860.00

Roof Covering Bill Total 6,370.00

BILL NO.5 : CARPENTRY

All softwood for carpentry to be pre-presure treated with

Copper Chrome Arsenite (C.C.A) to a dry salt retention of
5 kg per cubic metre by Alpine Building Methods (Pvt) or
equally approved.

ROOFS TIMBERS

Roof Trusses

Engineer designed roof truss system designed and

supplied by approved manufacturer., truss members to be
merchantable grade sized to matching thickness and
jointed only at node points, design is to include total roof
system and is to include total roof system and is to be
based on group three stresses as net section with
matching depth of rafters to projections. The
Manufacturer will be deemed to have inspected all the
relevant drawings before tendering and shall verify the
design with the Architect before manufacture
( calculations to be submitted if required.

49 Roof truss system designed to carry Chromadek roof

sheeting at 7 degree pitch on 50 x 75 mm purlins at
maximum 1200 mm centres with plastered plasterboard
ceiling on brandering to soffit of trusses at maximum 400
mm centres including any necessary additional ceiling
joists and all necessary bracing, ( wall plates, purlins,
brandering., fascia, etc.) all shown on Drawing No Item 1 7,000.00 7,000.00

Wrot softwood

50 230 x 38 mm wrot softwood fascia or bargeboard to ends

of trusses or purlins. m 70 5.80 406.00

Carpentry Bill Total 7,406.00

BILL NO.6 : JOINERY AND IRONMONGERY

CEILINGS AND CORNICES

Ceilings and Cornices:

50 Plaster board ceiling m² 180 24.00 4,320.00

51 Wall angle cornice m 220 5.00 1,100.00

DOORS

Semi- solid core internal quality flush doors with veneer

suitable for painting both sides

52 44 mm Door size 813 x 2 100 mm. No 11 98.00 1,078.00

53 44mm Door size 1200 x 2100mm No 1 350.00 350.00

IRONMONGERY

Supply and fix the following to wood

54 Union No. CZ682-24-77CH three lever mortice lockset. No 11 24.00 264.00

55 Union No . CZ682-24-77CH two lever mortice lockset No 1 22.00 22.00

Joinery and Iron Mongery Bill Total 7,134.00

BILL NO.7 : METALWORK

MILD STEEL

THE FOLLOWING IN MILD STEEL INCLUDING ALL

NECESSARY CUTTING, DRILLING, ETC. CLEAN AND
FILE ALL WELDED JOINTS FLUSH AND SET UP AND
MAINTAIN IN POSITION

DOOR FRAMES

Standard full profile pressed steel door frames with

chromium plated striking plates where appropriate
(building in elsewhere measured).

For one brick wall

56 44 mm Ditto size 813 x 2 100 mm. No 11 74.00 814.00

57 44 mm Ditto size 1200 x 2 100 mm. No 1 250.00 250.00

For half brick wall

58 44 mm Fanlight size 813 x 2 400 mm. No 1 110.00 110.00

ALUMINIUM WINDOWS AND FRAMES (BUILDING IN

ELSEWHERE MEASURED)

Purpose made natural anodized aluminium windows and

doors in pressed aluminium intermediate and end
mullions and with pressed aluminium external cills the
whole to be executed by an approved firm of specialists to
the Architect's approval with aluminium permavents
where specified supplied, fixed and glazed complete

59 Sliding Door unit overall size 2750 x 2100mm in 6 mm

laminated glass. No 1 1,480.00 1,480.00

60 Sliding Door unit overall size 2900 x 2100mm mm in 6

mm laminated glass. No 1 1,600.00 1,600.00

61 Window unit size 1000 x 1000 mm in glazed in 6 mm

laminated glass. No 1 112.00 112.00
62 Window unit size 2000 x 1700 mm in glazed in 6 mm
laminated glass. No 1 380.80 380.80

63 Window unit size 2000 x 1500 mm in glazed in 6 mm

laminated glass. No 1 336.00 336.00

64 Window unit size 600 x 1500mm in glazed in 6 mm

laminated glass. No 1 120.00 120.00

65 Window unit size 600 x 900 mm in glazed in 6 mm

laminated glass. No 1 100.00 100.00

66 Window unit size 700 x 2000 mm in glazed in 6 mm

laminated glass. No 3 156.80 470.40

67 Window unit size 1200 x 1500 mm in glazed in 6 mm

laminated glass. No 2 201.60 403.20

68 Window unit size 1800 x 2100 mm in glazed in 6 mm

laminated glass. No 3 423.36 1,270.08

69 Window unit size 1200 x 2500mm in glazed in 6 mm

laminated glass. No 1 336.00 336.00

70 Balustrading (provisional) m2 15 285.00 4,275.00

Metalwork Bill Total 12,057.48

BILL NO.8 : PLASTERING AND PAVING

EXTERNALLY

One coat of cement plaster as described including all

labours with a fine woodfloat finish on

71 Walls m² 195 7.00 1,365.00

72 Walls in narrow widths. m² 25 7.00 175.00

INTERNALLY

Internal one coat cement plaster as described including all

labours with a fine woodfloat finish on

73 Walls. m² 575 7.00 4,025.00

74 Walls in narrow widths. m² 25 7.00 175.00

Render in Rhinoset plasterincluding all labours with a

steel trowel finish on.

75 Walls. m² 500 4.00 2,000.00

76 Walls in narrow widths. m² 25 4.00 100.00

77 In Ceilings m² 180 5.00 900.00

WALL TILING
 200 x 200 x 6 mm White glazed wall tiles with continuous
horizontal and vertical joints bedded in cement mortar and
including cement sand screed backing and pointing in
white cement and clean down to approved on completion.

78 Walls. m² 100 21.00 2,100.00

79 Natural Stone Cladding m² 25 72.00 1,800.00

Sundries:

80 150 mm Semi-recessed recesso pattern toilet roll holder

complete with spring wooden roller and build into and
including forming pocket in tiled wall. No 3 38.00 114.00

PAVING

Cement and sand ( 1: 4 ) screed as described .

81 Paving overall thickness 40 mm. m² 180 5.80 1,044.00

82 600 x 600 x 8 mm Ceramic floor tile of approved colour

and manufacture on and including cement sand (1:4)
screed including all straight cutting and point all joints in
approved grout and on completion clean down to m² 180 21.00 3,780.00

83 75 mm Skirting tile (Provisional). m 220 2.40 528.00

Plastering Bill Total 18,106.00

BILL NO.9 : PLUMBING

PLUMBING (PROVISIONAL)

RAINWATER DISPOSAL AND FLASHINGS

0,6 mm Galvanised sheet iron as described in .

84 Flashings. m² 30 21.50 645.00

85 100 x 100 mm eaves gutter with square beaded top edge

on brackets as described to wood . m 70 17.80 1,246.00

86 Extra for stopped end . No 8 15.20 121.60

87 Ditto for angle. No 8 15.20 121.60

88 Ditto for outlet with nozzle for and joint to 75 x 75 mm

rainwater pipe. No 8 15.20 121.60

89 75 x 75 mm Rainwater pipe fixed 38 mm clear off wall

with holderbats. m 30 17.80 534.00

90 Extra for shoe. No 8 6.80 54.40

91 Ditto eaves offset. No 8 6.80 54.40

 SANITARY FITTINGS

92 Approved Hand Wash Basin ( complete with all

accessories) No 3 280.00 840.00

93 Approved Acrylic tub ( complete with all accessories) No 2 575.00 1,150.00

94 Approved WC suite( complete with all accessories) No 3 180.00 540.00

95 Approved shower cubicles ( complete with all accessories) No 3 550.00 1,650.00

96 Approved kitchen sink ( complete with all accessories) No 1 320.00 320.00

97 100 Litre "Monarch" or equal pressure type roof mounted

solar water heater set up in position and connect up. No 1 540.00 540.00

98 Pipework Item 1 3,500.00 3,500.00

Plumbing Bill Total 11,438.60

BILL NO.10 : GLAZING

MIrrors

99 6 mm Clear float quality glass silvered and sealed mirror

with polished edges sprayed on back with clear lacquer
before fixing four times drilled for and screwed to
plastered walls with and including chromium plated
capped mirror screws and rubber washers , size 1 200 x 1
200 mm .
No 3 184.00 552.00

Glazing Bill Total 552.00

BILL NO.11 : PAINTING

ON PLASTER, ETC

EXTERNALLY

Prepare and apply two coats internal quality PVA

emulsion paint externally on

100 Walls m² 195 6.00 1,170.00

101 Ditto in narrow widths. m² 25 6.00 150.00

Prepare and apply two coats internal quality PVA

emulsion paint internally on

102 Fine steel trowel plastered walls. m² 500 6.00 3,000.00

103 Fine steel trowel plastered walls in narrow widths. m² 25 6.00 150.00

104 On ceilings m² 180 6.00 1,080.00

ON METAL
 Clean down , prime and apply one undercoat and two
finishing coats high gloss enamel paint on

105 Pressed steel door frames . m² 16 6.50 104.00

106 Gutters. m² 25 6.50 162.50

107 75 x 75 mm Down pipes. m 30 6.50 195.00

ON WOOD, ETC

Knot , prime , stop and apply one undercoat and two

finishing coats high enamel paint on .

108 General surfaces of doors. m² 50 6.50 325.00

109 Fascia boards. m² 25 5.50 137.50

LEAVE CLEAN

110 Allow for touching up all work through out , clean off all
paint , oil , cement or other stains or marks on walls ,
floors , ceilings , glass , etc , and leave all surfaces in full
and proper working order .
Item 1 100.00

Painting Bill Total 6,574.00

Specialists Services

1 Electrical Works (Provisional) item 1 5,000.00 5,000.00

2 Pergola Fixing (Provisional) item 1 3,000.00 3,000.00

3 Asphalting (Provisional) item 1

Specialists Services Total 8,000.00

Subtotal 1 126,945.75

Preliminaries and Generals 10,155.66

Subtotal 2 137,101.41

VAT 15% 20,565.21

Total Tender Sum 157,666.62

 Description Amount

1 Foundations 21,793.25

2 Concrete 13,406.00

3 Brickwork 14,108.42

4 Roof Covering 6,370.00

5 Carpentry 7,406.00

6 Joinery and Iron Mongery 7,134.00

7 Metalwork 12,057.48

8 Plastering and Paving 18,106.00

9 Plumbing 11,438.60

10 Glazing 552.00

11 Painting 6,574.00

12 Specialists Services 8,000.00

Subtotal 1 126,945.75

14 Preliminaries and Generals 10,155.66

Subtotal 2 137,101.41

15 15% VAT 20,565.21

Total Tender Sum 157,666.62

Description Unity Quantiity Rate Amount
FOOTING
cement bags 124
River sand m3 9
Q Stones m3 18

BRICKWORK
Bricks no 15730
brickforce
230mm rolls 20
115mm rolls 12
cement bags 46
Pitsand m3 16
OVERSITE CONCRETE
cement bags 58
Riversand m3 7
Q Stones m3 14
HARDCORE
Grovel m3 28
DPM rolls 2
Termites poison ltrs

SUPERSTRUCTURE
DPC
230mm rolls 6
115mm rolls 4
BRICKWORK
Bricks no 38417
Cement bags 116
Brickforce
230mm rolls 49
115mm rolls 29
Pitsand m3 40
STRUCURAL CONCRETE
Cement bags 114
Riversand m3 9
Q Stones m3 13
Reinforcement kg 2990
FINISHES
PLATERING
Cement bags 64
Pitsand m3 25
Rhinoset bags 50
PAINTING
Paint interior/exterior/ceiling ltrs 130
DOORS
Door frames
44mm ditto size 813*2100 no 11
44mm fanlight size 813*2400 no 1
44mm ditto size 1200*2100 no 1
ALLUMINIUM WINDOWS/DOORS
Sliding Door unit overall size 2750 x
2100mm in 6 mm laminated glass. no 1

Sliding Door unit overall size 2900 x

2100mm mm in 6 mm laminated
glass. no 1

Window unit size 1000 x 1000 mm in

glazed in 6 mm laminated glass. no 1

Window unit size 2000 x 1700 mm in

glazed in 6 mm laminated glass. no 1

Window unit size 2000 x 1500 mm in

glazed in 6 mm laminated glass. no 1

Window unit size 600 x 1500mm in

glazed in 6 mm laminated glass. no 1

Window unit size 600 x 900 mm in

glazed in 6 mm laminated glass. no 1

Window unit size 700 x 2000 mm in

glazed in 6 mm laminated glass. no 3

Window unit size 1200 x 1500 mm in

glazed in 6 mm laminated glass. no 2

Window unit size 1800 x 2100 mm in

glazed in 6 mm laminated glass. no 3

Window unit size 1200 x 2500mm in

glazed in 6 mm laminated glass. no 1