V U S C A P E V I D E O WA L L S E R V E R
Quick Start Guide
© 2016, VuWall Technology, Inc.
181, Hymus Blvd, Suite 301
Pointe-Claire, QC H9R 5P4
Phone +1 514 505 4436
www.vuwall.com
VuScape Quick Start Guide
Box contents:
VuScape server USB keyboard USB mouse
Chassis front panel key Power cables Breakout cables and video adaptors
VuWall USB key with installers for VuWall2 Client & LightWeight Client
Elements of the server
Power switch
Reset switch
Activity LEDs
2 USB ports
DVD drive
Lockable
Front Panel
Redundant power inputs | 10 USB ports | Dual LAN |Audio ports | Video I/O
I/O ports are counted in increments from the left to the right
Note: Port configuration in these pictures may differ from your VuScape Server.
© 2016 VuWall Technology, Inc.
VuScape Quick Start Guide
Typical video inputs and outputs configurations
VuScape 280M models
Typically, top row are outputs 4 channel breakout
Bottom row are inputs
Top connector for 4 DVI-I outputs
VGA adaptors included
2 channel breakout
Bottom connector for DVI-I inputs.
VGA adaptors included
4 channel breakout
2 inputs, 4 inputs or none Refer to VuScape User’s Manual for complete supported formats
VuScape 280D models Refer to VuScape User’s Manual for complete supported formats
Inputs and outputs are on
DisplayPort outputs DVI-I Inputs
separate slots. Port
numbering starts from the
left to the right. Top DP out 1
connectors are the primary Breakout for 2
ports. DP out 2 DVI-I input (1-2)
DP out 3
Breakout for 2
DVI-I input (3-4)
DP out 4
Installing the VuScape server in a 19” Rackmount
The VuScape chassis is a 4U Standard 19” Rackmount 10 inches Fans
unit. It is required to keep at least 1 rack space unit free
on top of the server. This requirement is necessary for
appropriate cooling of the components.
Here are the steps you’ll need to do to deploy this VuScape server
1. Connect the 2 power, network, keyboard, mouse 6. Configure the multi-display setup for your video wall
2. Connect a display on the 1st output of the VuScape (refer to the User’s Manual)
Server 7. Install VuWall2 Client software on control computer(s).
3. Startup server and go through Windows Welcome Installers are located on the provided USB key
4. Join the server to your network 8. Install VuWall2 Lightweight Client software on remote
5. Activate VuWall2 License (Activation may be already computer(s). Installers are located on the provided
done in factory) USB key
The complete VuScape & VuWall2 user’s manual can be found in the Start menu of the server.
© 2016 VuWall Technology, Inc.
VuScape Quick Start Guide
+1 514 505 4436
+1 514 505 4436
VuWall Technology, Inc.
181, Hymus Blvd, Suite 301
Pointe-Claire, QC H9R 5P4
Phone +1 514 505 4436
www.vuwall.com
© 2016 VuWall Technology, Inc.
