Round cylinder DSNU-S

Round cylinder DSNU-S

Characteristics
At a glance Further information → dsnu-s
• Space-optimised, ideal for narrow installation spaces
• Piston rod with male and female threads
• Quick and easy to install.
• Lightweight
• Stainless steel cylinder barrel
• End cap made of wrought aluminium alloy

Product segmentation

Festo Core Range

Solves the majority of your automation tasks
With the Festo Core Range, we have selected the most important products and functions from our broad product catalogue, and added the quickest delivery.
the Core Range offers you the best value with the expected high Festo quality.
• Quickest delivery, worldwide – wherever, whenever
• Expected high Festo quality
• Easy and fast to select

Ordering data - modular system Further information → dsnu-s

Configurable product
This product and all its product options can be ordered online via the configurator.

Diagrams Further information → dsnu-s

The diagrams shown in this document are also available online. These can be used to display precise values.

Product version

[S] Space-saving

DSNU-S compared to DSNU:

• Total width reduced by up to 40%
• Total length up to 3.5 cm shorter

2 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Characteristics
Cushioning
End-position cushioning has the following functions:
• Reduces kinetic energy in the end positions
• Avoids vibrations
• Reduces noise generation

[P] Elastic cushioning rings/plates on both sides [PPS] Pneumatic cushioning, self-adjusting at both ends

The drive is fitted with elastic polymer end-position cushioning. The drive is fitted with pneumatic end-position cushioning, which automatically
Benefits: adapts to the moving mass and speed and does not need to be adjusted by the
• No adjustment required operator.
• Saves time Benefits:
• Saves time
• Powerful

Position sensing

[A] For proximity sensor

By using proximity switches, any position can be detected.

Special material properties

[F1A] Recommended for production facilities for the manufacture of lithi-

um-ion batteries
Product:
• Metals with more than 1% copper, zinc or nickel by mass are excluded from
use. Exceptions are nickel in steel, chemically nickel-plated surfaces, circuit
boards, cables, electrical plug connectors and coils
Accessories:
• Please contact your Festo representative for information on which accessories
are suitable for manufacturing lithium-ion batteries

Cylinder end cap

[MX] Mounting thread, end cap [MP] Swivel mounting, end cap

• Short end cap with mounting thread • Short end cap with swivel mounting
• Stainless steel cylinder barrel • Stainless steel cylinder barrel
• Bearing cap with threaded flange • Bearing cap with threaded flange

[MQ] Transverse supply port, end cap [MA] Axial air connection, end cap

• Short end cap with compressed air supply port, transverse • Short end cap with compressed air supply port, axial
• Stainless steel cylinder barrel • Stainless steel cylinder barrel
• Bearing cap with threaded flange • Bearing cap with threaded flange

2023/09 –  d www.festo.com/catalogue/... 3
Round cylinder DSNU-S

Characteristics
Piston rod thread extension

[K2] 1 ... 35 mm

The male piston rod thread can be extended:

• Ø 8: 1 ... 15 mm
• Ø 12, 16: 1 ... 20 mm
• Ø 20: 1 ... 25 mm
• Ø 25: 1 ... 35 mm

K6 - Shortened male piston rod thread

[K6] 1 ... 8 mm

The male piston rod thread can be shortened:

• Ø 8, 12, 16: 1 ... 4 mm
• Ø 20, 25: 1 .. 8 mm

Piston rod thread type

[_] Male thread [K3] With female thread

Piston rod extension

[...K8] 1 ... 150 mm

The piston rod can be extended at one end:

• Ø 8: 1 ... 50 mm
• Ø 12, 16: 1 ... 100 mm
• Ø 20: 1 ... 110 mm
• Ø 25: 1 ... 150 mm

4 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Type code
001 Series 007 Special material properties
DSNU Round cylinder, double-acting, based on ISO 6432 F1A Recommended for production facilities for the manufacture of
lithium-ion batteries
002 Design type
008 Cylinder end cap
S Short
MA Axial air connection, end cap
003 Piston diameter [mm] MQ Transverse supply port, end cap
8 8 MX Mounting thread, end cap
12 12 MP Swivel mounting, end cap
16 16
009 Piston rod thread extension
20 20
25 25 None
K2 1 ... 35 mm
004 Stroke [mm]
010 Piston rod thread type
... 1 ... 200
Male thread
005 Cushioning K3 With female thread
PPS Pneumatic cushioning, self-adjusting at both ends
011 K6 - Shortened male piston rod thread
P Elastic cushioning rings/plates on both sides
None
006 Position sensing K6 1 ... 8 mm
A For proximity sensor
012 Piston rod extension
None
...K8 1 ... 150 mm

2023/09 –  d www.festo.com/catalogue/... 5
Round cylinder DSNU-S

Datasheet
General technical data
Piston diameter 8 mm 12 mm 16 mm 20 mm 25 mm
Stroke 1) 10 mm, 15 mm, 20 mm, 10 mm, 15 mm, 20 mm, 10 mm, 15 mm, 20 mm, 25 mm, 30 mm, 40 mm, 50 mm, 60 mm, 80 mm, 100 mm,
25 mm, 30 mm, 40 mm, 25 mm, 30 mm, 40 mm, 125 mm, 150 mm, 200 mm
50 mm, 60 mm, 80 mm, 50 mm, 60 mm, 80 mm,
100 mm 100 mm, 125 mm, 150 mm
Pneumatic connection M5 G1/8
Piston rod thread 2) M4 M6 M8 M10x1.25
Design Piston
Piston rod
Cylinder barrel
Mode of operation Double-acting
Cushioning Elastic cushioning rings/plates at both ends Elastic cushioning rings/plates at both ends
Self-adjusting pneumatic end-position cushioning
Cushioning length – 12 mm 15 mm 17 mm
Position detection Via proximity switch
Type of mounting With accessories
Mounting position optional
1) Cylinders with position sensing require a minimum stroke of 10 mm to ensure reliable sensing.Also available with longer strokes on request.
2) Male thread / female thread:Ø 8: M4 / M2.5Ø 12: M6 / M3Ø 16: M6 / M3Ø 20: M8 / M4Ø 25: M10x1.25 / M6

Operating and environmental conditions

Piston diameter 8 mm 12 mm 16 mm 20 mm 25 mm
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot Lubricated operation possible (in which case lubricated operation will always be required)
medium
Operating pressure 0.15 ... 1 MPa 0.08 ... 1 MPa 0.06 ... 1 MPa
Operating pressure 1.5 ... 10 bar 0.8 ... 10 bar 0.6 ... 10 bar
Operating pressure 21.75 ... 145 psi 11.6 ... 145 psi 8.7 ... 145 psi
Ambient temperature 1) -20 ... 80°C
Corrosion resistance class 0 - No corrosion stress
CRC 2) 2 - Moderate corrosion stress
1) Note operating range of the proximity switches.
2) DSNU-S-...: KBK2
DSNU-S-...-F1A: KBK0
More information www.festo.com/x/topic/crc

Weight
Piston diameter 8 mm 12 mm 16 mm 20 mm 25 mm
Basic weight for 0 mm stroke 20 g 35.9 g 48.9 g 126 g 180.2 g
Additional weight per 10 mm 2.4 g 4.2 g 4.8 g 7.2 g 11 g
stroke
Moving mass for 0 mm stroke 6.3 g 16.2 g 18.3 g 37.3 g 63.6 g
Additional moving mass per 1g 2g 4g 6g
10 mm stroke

Forces and impact energy

Piston diameter 8 mm 12 mm 16 mm 20 mm 25 mm
Theoretical force at 0.6 MPa 30.2 N 67.9 N 120.6 N 188.5 N 294.5 N
(6 bar, 87 psi), advance stroke
Theoretical force at 0.6 MPa 22.6 N 50.9 N 103.7 N 158.3 N 247.4 N
(6 bar, 87 psi), return stroke

6 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Datasheet
Materials
Material cover Anodised wrought aluminium alloy
Material piston rod High-alloy stainless steel
Material cylinder barrel High-alloy stainless steel
Material seals TPE-U(PU)
Note on materials RoHS-compliant
LABS (PWIS) conformity VDMA24364-B2-L
Cleanroom class Class 6 according to ISO 14644-1
Suitability for the production Metals with more than 1% by mass of copper, zinc or nickel are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed
of Li-ion batteries circuit boards, cables, electrical plug connectors and coils

Max. transverse force Fq as a function of projection I

Max. transverse force Fq as a function of projection I – DSNU-S-8

0.7
0.6

0.5
0.4
F [N]

0.3
0.2

0.1
0
1 10 20 30 40 50 60 70 80 90 100
l [mm]
DSNU-S-8

Max. transverse force Fq as a function of projection I – DSNU-S-12 ... 20

14
12
10
8
F [N]

6
4
2
0
1 25 50 75 100 125 150 175 200 225
l [mm]
DSNU-S-12/16
DSNU-S-20

2023/09 –  d www.festo.com/catalogue/... 7
Round cylinder DSNU-S

Datasheet
Max. transverse force Fq as a function of projection I – DSNU-S-25
30

25

20
F [N]

15

10

0
1 25 50 75 100 125 150 175 200 225
l [mm]
DSNU-S-25

8 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-MX – Mounting thread, short end cap Download CAD data a www.festo.com

[1] + = plus stroke length

2023/09 –  d www.festo.com/catalogue/... 9
Round cylinder DSNU-S

Dimensions
AM B BE BF D D1 D4 EE G G1
@ @ @
h8 [-P] [-PPS]
DSNU-S-8-...-MX 12 8 M8x1 14 12 9,3 9 16,9
–
DSNU-S-12-...-MX 8 16 14 13,3 M5 9,7 12
16 10 M10x1
DSNU-S-16-...-MX 20 18 17,3 11,2 9,7 11,2
DSNU-S-20-...-MX 20 28 24 21,3 16 16
20 M20x1,5 13 G1/8 –
DSNU-S-25-...-MX 22 30 27 26,5 16,8 16,8

KK KV KV2 KW KW2 L2 MM PL PL1 VD

@
[-P] [-PPS]
DSNU-S-8-...-MX M4 11 45,6 4 5 13,4
–
DSNU-S-12-...-MX 4 46,1 8
M6 14 – – 6 6
DSNU-S-16-...-MX 45,7 57,2 7,5 1,5
DSNU-S-20-...-MX M8 57,8 8 8,2 –
24 7 –
DSNU-S-25-...-MX M10x1,25 17 5 60,8 10 8,3 –

WF ZJ ß1

[-P] [-PPS]
DSNU-S-8-...-MX 11,9 _0,7 57,5 _1 –
–
DSNU-S-12-...-MX 13 _0,7 59,1 _1
5
DSNU-S-16-...-MX 12,9 _0,75 58,6 _1 70,1 _0,1
DSNU-S-20-...-MX 17,3 _0,75 75,1 _1 7
–
DSNU-S-25-...-MX 19,6 _0,75 80,4 _1 9

10 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-MP – Swivel mounting, short end cap Download CAD data a www.festo.com

[1] + = plus stroke length

B2 CD EW G L2
@ @
[-P] [-PPS] [-P] [-PPS]
DSNU-S-8-...-MP 9 45,6
10 4 8 – –
DSNU-S-12-...-MP 9,7 46,1
DSNU-S-16-...-MP 14,5 6 12 11,2 9,7 45,7 57,2
DSNU-S-20-...-MP 21 62,8
20 8 16 – –
DSNU-S-25-...-MP 21,8 65,8

L3 L4 L5 PL XC ZJ

[-P] [-PPS] [-P] [-PPS]

DSNU-S-8-...-MP 8 11,5 5 60,3 57,5 _1
6,3 – –
DSNU-S-12-...-MP 11 12,5 63,9 59,1 _1
6
DSNU-S-16-...-MP 9 10 16,5 61,1 72,6 58,6 _1 70,1 _0,1
DSNU-S-20-...-MP 15,1 8,2 85,2 80,1 _1
12 22 – –
DSNU-S-25-...-MP 16,1 8,3 91,5 85,4 _1

2023/09 –  d www.festo.com/catalogue/... 11
Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-MQ – Lateral supply port, short end cap Download CAD data a www.festo.com

[1] + = plus stroke length

G L2 ZJ

[-P] [-PPS] [-P] [-PPS] [-P] [-PPS]

DSNU-S-8-...-MQ 9 45,6 57,5 _1
– – –
DSNU-S-12-...-MQ 9,7 46,1 59,1 _1
DSNU-S-16-...-MQ 11,2 9,7 45,7 57,2 58,6 _1 70,1 _0,1
DSNU-S-20-...-MQ 19,6 61,4 78,7 _1
– – –
DSNU-S-25-...-MQ 22,4 66,4 88 _1

12 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-MA – Axial supply port, short end cap Download CAD data a www.festo.com

[1] + = plus stroke length

EE G L2 ZJ

_1
DSNU-S-8-...-MA 7,6 47,7 59,6
DSNU-S-12-...-MA M5 47,2 60,2
7,7
DSNU-S-16-...-MA 48,7 61,6
DSNU-S-20-...-MA 14,5 61,4 78,7
G1/8
DSNU-S-25-...-MA 14 63,4 83

2023/09 –  d www.festo.com/catalogue/... 13
Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-K2 – Extended male piston rod thread Download CAD data a www.festo.com

[1] + = plus stroke length

A1 AM

max.
DSNU-S-8-...-K2 15 12
DSNU-S-12-...-K2
20 16
DSNU-S-16-...-K2
DSNU-S-20-...-K2 25 20
DSNU-S-25-...-K2 35 22

14 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-K6 – Shortened male piston rod thread Download CAD data a www.festo.com

[1] + = plus stroke length

A3 AM

max.
DSNU-S-8-...-K6 12
DSNU-S-12-...-K6 4
16
DSNU-S-16-...-K6
DSNU-S-20-...-K6 20
8
DSNU-S-25-...-K6 22

2023/09 –  d www.festo.com/catalogue/... 15
Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-K3 – Female thread on the piston rod Download CAD data a www.festo.com

[1] + = plus stroke length

AF KF

DSNU-S-8-...-K3 5 M2,5
DSNU-S-12-...-K3
6 M3
DSNU-S-16-...-K3
DSNU-S-20-...-K3 M4
12
DSNU-S-25-...-K3 M6

16 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Dimensions
Dimensions – DSNU-S-...-K8 – Extended piston rod Download CAD data a www.festo.com

[1] + = plus stroke length

A2 WF

max.
DSNU-S-8-...-K8 50 11,9 _0,7
DSNU-S-12-...-K8 13 _0,7
100
DSNU-S-16-...-K8 12,9 _0,75
DSNU-S-20-...-K8 110 17,3 _0,75
DSNU-S-25-...-K8 150 19,6 _0,75

2023/09 –  d www.festo.com/catalogue/... 17
Round cylinder DSNU-S

Dimensions
Dimensions – Foot mounting HBN-S Download CAD data a www.festo.com

[1] + = plus stroke length

AB AH AO AT AU E MR SA TR XA XS
@ ±0,2 ±0,1
DSNU-PPS DSNU-PPS
HBN-S-8 4,5 10 5 2 11 35 7 67,4 – 25 68,7 – 21,3
HBN-S-12 5,5 15 6 3 14 42 10 74 – 32 73,3 – 24,3
HBN-S-16 5,5 15 6 3 14 42 10 73,5 85 32 72,8 84,3 24,3
HBN-S-20 6,6 25 8 4 17 54 18 91,6 91,6 40 92,3 92,3 30,7
HBN-S-25 6,6 25 8 4 17 54 18 94,3 94,3 40 97,3 97,3 33

18 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Dimensions
Dimensions – Clevis foot LBN Download CAD data a www.festo.com

CM EK FL GL HB LE MR RG UX
@

LBN-8/101) 8,1 4 24 +0,3/–0,2 13,8 4,5 21,5 5 12,5 20

LBN-12/161) 12,1 6 27 +0,3/–0,2 13 5,5 24 7 15 25
LBN-20/251) 16,1 8 30 +0,4/–0,2 16 6,6 26 10 20 32

1) You can find out which accessory fits which piston Ø of the product in the chapter on Accessories.

2023/09 –  d www.festo.com/catalogue/... 19
Round cylinder DSNU-S

Ordering data
DSNU-S-8 ... 16 with P cushioning
Piston diameter Stroke Cylinder end cap Part no. Type
​ ​ ​ ​ ​ ​

8 mm 10 mm Transverse supply port, 5205897 DSNU-S-8-10-P-A-MQ

15 mm end cap 5205898 DSNU-S-8-15-P-A-MQ
20 mm 5205899 DSNU-S-8-20-P-A-MQ
25 mm 5205900 DSNU-S-8-25-P-A-MQ
30 mm 5205902 DSNU-S-8-30-P-A-MQ
40 mm 5205903 DSNU-S-8-40-P-A-MQ
50 mm 5205904 DSNU-S-8-50-P-A-MQ
60 mm 5205905 DSNU-S-8-60-P-A-MQ
80 mm 5205906 DSNU-S-8-80-P-A-MQ
100 mm 5205907 DSNU-S-8-100-P-A-MQ
12 mm 10 mm q 5211896 DSNU-S-12-10-P-A-MQ
15 mm q 5211897 DSNU-S-12-15-P-A-MQ
20 mm q 5211898 DSNU-S-12-20-P-A-MQ
25 mm q 5211899 DSNU-S-12-25-P-A-MQ
30 mm q 5211900 DSNU-S-12-30-P-A-MQ
40 mm q 5211901 DSNU-S-12-40-P-A-MQ
50 mm q 5211903 DSNU-S-12-50-P-A-MQ
60 mm q 5211904 DSNU-S-12-60-P-A-MQ
80 mm q 5211905 DSNU-S-12-80-P-A-MQ
100 mm q 5211906 DSNU-S-12-100-P-A-MQ
125 mm q 5211908 DSNU-S-12-125-P-A-MQ
150 mm q 5211909 DSNU-S-12-150-P-A-MQ
16 mm 10 mm q 5216087 DSNU-S-16-10-P-A-MQ
15 mm q 5216088 DSNU-S-16-15-P-A-MQ
20 mm q 5216089 DSNU-S-16-20-P-A-MQ
25 mm q 5216090 DSNU-S-16-25-P-A-MQ
30 mm q 5216091 DSNU-S-16-30-P-A-MQ
40 mm q 5216093 DSNU-S-16-40-P-A-MQ
50 mm q 5216094 DSNU-S-16-50-P-A-MQ
60 mm q 5216095 DSNU-S-16-60-P-A-MQ
80 mm q 5216096 DSNU-S-16-80-P-A-MQ
100 mm q 5216098 DSNU-S-16-100-P-A-MQ
125 mm q 5216099 DSNU-S-16-125-P-A-MQ
150 mm q 5216100 DSNU-S-16-150-P-A-MQ
200 mm q 5216101 DSNU-S-16-200-P-A-MQ

DSNU-S-20 ... 25 with P cushioning

Piston diameter Stroke Cylinder end cap Part no. Type
​ ​ ​ ​ ​ ​

20 mm 10 mm Mounting thread, end q 5224633 DSNU-S-20-10-P-A-MX

15 mm cap q 5224634 DSNU-S-20-15-P-A-MX
20 mm q 5224635 DSNU-S-20-20-P-A-MX
25 mm q 5224636 DSNU-S-20-25-P-A-MX
30 mm q 5224637 DSNU-S-20-30-P-A-MX
40 mm q 5224639 DSNU-S-20-40-P-A-MX
50 mm q 5224641 DSNU-S-20-50-P-A-MX
60 mm q 5224642 DSNU-S-20-60-P-A-MX
80 mm q 5224643 DSNU-S-20-80-P-A-MX
100 mm q 5224644 DSNU-S-20-100-P-A-MX
125 mm q 5224645 DSNU-S-20-125-P-A-MX
150 mm q 5224646 DSNU-S-20-150-P-A-MX
200 mm q 5224647 DSNU-S-20-200-P-A-MX
25 mm 10 mm q 5228227 DSNU-S-25-10-P-A-MX
15 mm q 5228228 DSNU-S-25-15-P-A-MX
20 mm q 5228229 DSNU-S-25-20-P-A-MX
25 mm q 5228230 DSNU-S-25-25-P-A-MX

20 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Ordering data
DSNU-S-20 ... 25 with P cushioning
Piston diameter Stroke Cylinder end cap Part no. Type
​ ​ ​ ​ ​ ​

25 mm 30 mm Mounting thread, end q 5228231 DSNU-S-25-30-P-A-MX

40 mm cap q 5228232 DSNU-S-25-40-P-A-MX
50 mm q 5228233 DSNU-S-25-50-P-A-MX
60 mm q 5228234 DSNU-S-25-60-P-A-MX
80 mm q 5228235 DSNU-S-25-80-P-A-MX
100 mm q 5228236 DSNU-S-25-100-P-A-MX
125 mm q 5228237 DSNU-S-25-125-P-A-MX
150 mm q 5228238 DSNU-S-25-150-P-A-MX
200 mm q 5228239 DSNU-S-25-200-P-A-MX

DSNU-S-16 with PPS cushioning

Piston diameter Stroke Cylinder end cap Part no. Type
​ ​ ​ ​ ​ ​

16 mm 25 mm Transverse supply port, q 5217238 DSNU-S-16-25-PPS-A-MQ

30 mm end cap q 5217239 DSNU-S-16-30-PPS-A-MQ
40 mm q 5217240 DSNU-S-16-40-PPS-A-MQ
50 mm q 5217241 DSNU-S-16-50-PPS-A-MQ
60 mm q 5217242 DSNU-S-16-60-PPS-A-MQ
80 mm q 5217243 DSNU-S-16-80-PPS-A-MQ
100 mm q 5217244 DSNU-S-16-100-PPS-A-MQ
125 mm q 5217245 DSNU-S-16-125-PPS-A-MQ
150 mm q 5217246 DSNU-S-16-150-PPS-A-MQ
200 mm q 5217248 DSNU-S-16-200-PPS-A-MQ

DSNU-S-20 ... 25 with PPS cushioning

Piston diameter Stroke Cylinder end cap Part no. Type
​ ​ ​ ​ ​ ​

20 mm 25 mm Mounting thread, end q 5225836 DSNU-S-20-25-PPS-A-MX

30 mm cap q 5225837 DSNU-S-20-30-PPS-A-MX
40 mm q 5225838 DSNU-S-20-40-PPS-A-MX
50 mm q 5225839 DSNU-S-20-50-PPS-A-MX
60 mm q 5225840 DSNU-S-20-60-PPS-A-MX
80 mm q 5225841 DSNU-S-20-80-PPS-A-MX
100 mm q 5225842 DSNU-S-20-100-PPS-A-MX
125 mm q 5225843 DSNU-S-20-125-PPS-A-MX
150 mm q 5225844 DSNU-S-20-150-PPS-A-MX
200 mm q 5225846 DSNU-S-20-200-PPS-A-MX
25 mm 25 mm q 5228452 DSNU-S-25-25-PPS-A-MX
30 mm q 5228453 DSNU-S-25-30-PPS-A-MX
40 mm q 5228454 DSNU-S-25-40-PPS-A-MX
50 mm q 5228455 DSNU-S-25-50-PPS-A-MX
60 mm q 5228456 DSNU-S-25-60-PPS-A-MX
80 mm q 5228457 DSNU-S-25-80-PPS-A-MX
100 mm q 5228458 DSNU-S-25-100-PPS-A-MX
125 mm q 5228459 DSNU-S-25-125-PPS-A-MX
150 mm q 5228460 DSNU-S-25-150-PPS-A-MX
200 mm q 5228461 DSNU-S-25-200-PPS-A-MX

Modular product system Further information → dsnu-s

Piston diameter Stroke 1) Part no. Type
​ ​ ​ ​ ​

8 mm 1 ... 100 mm 8112002 DSNU-S-8- -

12 mm 1 ... 150 mm 8112003 DSNU-S-12- -
16 mm 1 ... 200 mm 8112004 DSNU-S-16- -
20 mm 8112005 DSNU-S-20- -
25 mm 8112006 DSNU-S-25- -
1) Also available with longer strokes on request.

2023/09 –  d www.festo.com/catalogue/... 21
Round cylinder DSNU-S

Ordering data
Modular product system – For the production of Li-ion batteries Further information → dsnu-s
Piston diameter Stroke 1) Part no. Type
​ ​ ​ ​ ​

8 mm 1 ... 100 mm 8148785 DSNU-S-8- -F1A-

12 mm 1 ... 150 mm 8148786 DSNU-S-12- -F1A-
16 mm 1 ... 200 mm 8148787 DSNU-S-16- -F1A-
20 mm 8148788 DSNU-S-20- -F1A-
25 mm 8148789 DSNU-S-25- -F1A-
1) Also available with longer strokes on request.

22 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Peripherals
Peripherals overview

Accessories aPage/Internet
Type/order code Description
[1] Round cylinder DSNU-S Round cylinder, space-saving dsnu-s
[2] One-way flow control valve GRLA/GRLZ For regulating speed 27
[3] Push-in fitting QS For connecting tubing with standard O.D. qs
[4] Foot mounting HBN-S For bearing or end caps 24
[5] Clevis foot LBN For bearing cap 24
[6] Mounting kit SMBR For proximity switches and position transmitters 27
[7] Proximity switch SMT/SDBT Can be integrated in the cylinder profile 25
[7] Position transmitter SDAS/SDAT/SMAT • Continuously senses the position of the piston 26
• Has an analogue output
[8] Rod eye SGS With spherical bearing 24
[9] Rod clevis SG Permits a swivelling movement of the cylinder in one plane 24
[10] Self-aligning rod coupler FK/DARP To compensate for radial and angular deviations 24
[11] Coupling piece KSG To compensate for radial deviations 25

2023/09 –  d www.festo.com/catalogue/... 23
Round cylinder DSNU-S

Accessories
Foot mounting HBN-S
Size Material mounting 1) Product weight Part no. Type
​ ​ ​ ​ ​ ​

8 Galvanised steel 12 g q 5407712 HBN-S-8X1

26 g 8185945 HBN-S-8X2
Steel, chemically nick- 12 g 8148809 HBN-S-8X1-F1A
el-plated
12, 16 Galvanised steel 30 g q 5407772 HBN-S-12/16X1
63 g 8185946 HBN-S-12/16X2
Steel, chemically nick- 30 g 8148808 HBN-S-12/16X1-F1A
el-plated
20, 25 Galvanised steel 77 g q 5407787 HBN-S-20/25X1
165 g q 5407847 HBN-S-20/25X2
Steel, chemically nick- 77 g 8148811 HBN-S-20/25X1-F1A
el-plated 166 g 8148810 HBN-S-20/25X2-F1A
1) HBN-S-...-F1A: Recommended for production lines for the manufacture of Li-ion batteries. More information www.festo.com/x/topic/bat

Clevis foot LBN

Description Material mounting Product weight Part no. Type
​ ​ ​ ​ ​ ​

For Ø 8/12 Steel, Galvanised 20 g 6057 LBN-8/10

For Ø 16 40 g q 6058 LBN-12/16
For Ø 20/25 84 g q 6059 LBN-20/25

Rod clevis SG
Description Material clevis Product weight Part no. Type
​ ​ ​ ​ ​ ​

for Ø 8 Steel, Galvanised 8g 6532 SG-M4

for Ø 12, 16 22 g q 3110 SG-M6
for Ø 20 53 g q 3111 SG-M8
for Ø 25 103 g q 6144 SG-M10X1,25

Rod eye SGS

Description Material housing Product weight Part no. Type
​ ​ ​ ​ ​ ​

for Ø 8 Galvanised steel 21 g 9253 SGS-M4

for Ø 12/16 30 g q 9254 SGS-M6
for Ø 20 54 g q 9255 SGS-M8
for Ø 25 88 g q 9261 SGS-M10X1,25

Self-aligning rod coupler FK

Description Material housing Product weight Part no. Type
​ ​ ​ ​ ​ ​

For Ø 8 Steel, Galvanised 15 g 6528 FK-M4

For Ø 12, 16 23 g q 2061 FK-M6
For Ø 20 50 g q 2062 FK-M8
For Ø 25 210 g q 6140 FK-M10X1,25

Self-aligning rod coupler DARP

Description Material housing 1) Product weight Part no. Type
​ ​ ​ ​ ​ ​

for Ø 8 High-alloy stainless 17 g 8170110 DARP-M4-F

for Ø 12, 16 steel 25 g 8170115 DARP-M6-F
for Ø 20 58 g 8170116 DARP-M8-F
for Ø 25 236 g 8170119 DARP-M10P-F
1) DARP-...: Recommended for production lines for the manufacture of Li-ion batteries. Further information www.festo.com/x/topic/bat

24 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Accessories
​

Coupling piece KSG

​

Description Material mounting Product weight Part no. Type

​ ​ ​ ​ ​ ​ ​
​

For Ø 25 Steel, Galvanised 229 g 32963 KSG-M10X1,25

Proximity switch SMT-8M for T-slot, magneto-resistive

Type of mounting Switching output Electrical connec- Cable length Part no. Type
tion
​ ​ ​ ​ ​ ​ ​

Screw-clamped, 3-wire NPN N/O Open end 2.5 m q 574338 SMT-8M-A-NS-24V-E-2,5-OE

Insertable in the contact Plug M8, A-coded 0.3 m q 574339 SMT-8M-A-NS-24V-E-0,3-M8D
slot from above 3-wire PNP N/O Open end 2.5 m q 574335 SMT-8M-A-PS-24V-E-2,5-OE
contact Plug M8, A-coded 0.3 m q 574334 SMT-8M-A-PS-24V-E-0,3-M8D
2-wire PNP N/O Open end 5m q 8165237 SMT-8M-A-ZS-24V-E-5,0-OE
contact

Proximity switch SDBT-MSX for T-slot, magnetic Hall

Switching output Switching ele- Electrical connec- Cable length Part no. Type
ment function tion
​ ​ ​ ​ ​ ​ ​

PNP/NPN, N/C or N/O con- Open end 2.5 m q 8059121 SDBT-MSX-1L-PU-E-2.5-N-LE

switchable tact, switchable q 8059124 SDBT-MSX-1L-NU-E-2.5-N-LE
Plug M8, A-coded 0.3 m q 8059123 SDBT-MSX-1L-NU-E-0.3-N-M8
q 8059120 SDBT-MSX-1L-PU-E-0.3-N-M8

Mounting kits SMBR for proximity switches

Size Material profile Part no. Type
​ ​ ​ ​ ​

8 Wrought aluminium alloy 175091 SMBR-8-8

12 q 175093 SMBR-8-12
16 q 175094 SMBR-8-16
20 q 175095 SMBR-8-20
25 q 175096 SMBR-8-25

Connecting cables NEBU, straight, M8 connection

Electrical connec- Electrical connec- Electrical connec- Cable length Part no. Type
tion 1, connector tion 2, connector tion 2, number of
system system connections/
cores
​ ​ ​ ​ ​ ​ ​

M8x1, A-coded, Open end 3 2.5 m q 541333 NEBU-M8G3-K-2.5-LE3

to EN 61076-2- 5m q 541334 NEBU-M8G3-K-5-LE3
104

Connecting cables NEBU, straight, M12 connection

Electrical connec- Electrical connec- Electrical connec- Cable length Part no. Type
tion 1, connector tion 2, connector tion 2, number of
system system connections/
cores
​ ​ ​ ​ ​ ​ ​

M12x1, A-coded Open end 3 2.5 m q 541363 NEBU-M12G5-K-2.5-LE3

to EN 61076-2- 5m q 541364 NEBU-M12G5-K-5-LE3
101

2023/09 –  d www.festo.com/catalogue/... 25
Round cylinder DSNU-S

Accessories
Connecting cables NEBU, angled, M8 connection
Electrical connec- Electrical connec- Electrical connec- Cable length Part no. Type
tion 1, connector tion 2, connector tion 2, number of
system system connections/
cores
​ ​ ​ ​ ​ ​ ​

M8x1, A-coded, Open end 3 2.5 m q 541338 NEBU-M8W3-K-2.5-LE3

to EN 61076-2- 5m q 541341 NEBU-M8W3-K-5-LE3
104

Connecting cables NEBU, angled, M12 connection

Electrical connec- Electrical connec- Electrical connec- Cable length Part no. Type
tion 1, connector tion 2, connector tion 2, number of
system system connections/
cores
​ ​ ​ ​ ​ ​ ​

M12x1, A-coded Open end 3 2.5 m 541367 NEBU-M12W5-K-2.5-LE3

to EN 61076-2- 5m 541370 NEBU-M12W5-K-5-LE3
101

Position transmitter SDAS for T-slot, plug M8, A-coded

​

Description Sensing range Electrical connec- Cable length Part no. Type
tion 1, number of
connections/
cores
​ ​ ​ ​ ​ ​ ​ ​
​

Operating 52 mm 4 0.3 m 8063974 SDAS-MHS-M40-1L-PNLK-PN-E-0.3-M8

modes: two ad-
justable switch-
ing outputs; IO-
Link®

Position transmitter SDAT for T-slot, connector M8, A-coded

Sensing range Analogue output Electrical connec- Cable length Part no. Type
tion 1, number of
connections/
cores
​ ​ ​ ​ ​ ​ ​

0 ... 50.000 mm 4 - 20 mA 4 0.3 m 1531265 SDAT-MHS-M50-1L-SA-E-0.3-M8

0 ... 80.000 mm 1531266 SDAT-MHS-M80-1L-SA-E-0.3-M8
0 ... 100.000 1531267 SDAT-MHS-M100-1L-SA-E-0.3-M8
mm
0 ... 125.000 1531268 SDAT-MHS-M125-1L-SA-E-0.3-M8
mm
0 ... 160.000 1531269 SDAT-MHS-M160-1L-SA-E-0.3-M8
mm

Position transmitter SMAT-8M for T-slot, plug M8, A-coded

​

Sensing range Analogue output Electrical connec- Cable length Part no. Type
tion 1, number of
connections/
cores
​ ​ ​ ​ ​ ​ ​ ​
​

52 mm 0 - 10 V 4 0.3 m 553744 SMAT-8M-U-E-0,3-M8D

26 d www.festo.com/catalogue/... – 2023/09
 Round cylinder DSNU-S

Accessories
Mounting kits SMBR for position transmitters
Size Material profile Part no. Type
​ ​ ​ ​ ​

8 Wrought aluminium alloy 175091 SMBR-8-8

12 q 175093 SMBR-8-12
16 q 175094 SMBR-8-16
20 q 175095 SMBR-8-20
25 q 175096 SMBR-8-25

Connecting cables NEBU, straight

Electrical connec- Electrical connec- Electrical connec- Cable length Part no. Type
tion 1, connector tion 2, connector tion 2, number of
system system connections/
cores
​ ​ ​ ​ ​ ​ ​

M8x1, A-coded, Open end 4 2.5 m 541342 NEBU-M8G4-K-2.5-LE4

to EN 61076-2- 5m 541343 NEBU-M8G4-K-5-LE4
104

Connecting cables NEBU, angled

Electrical connec- Electrical connec- Electrical connec- Cable length Part no. Type
tion 1, connector tion 2, connector tion 2, number of
system system connections/
cores
​ ​ ​ ​ ​ ​ ​

M8x1, A-coded, Open end 4 2.5 m 541344 NEBU-M8W4-K-2.5-LE4

to EN 61076-2- 5m 541345 NEBU-M8W4-K-5-LE4
104

One-way flow control valves GRLA – For exhaust air

Description Pneumatic connection 1 Pneumatic connection, Part no. Type
port 2
​ ​ ​ ​ ​ ​

For Ø 8...16 Push-in connector 3 M5 q 193137 GRLA-M5-QS-3-D

mm
Push-in connector 4 q 193138 GRLA-M5-QS-4-D
mm
Push-in connector 6 q 193139 GRLA-M5-QS-6-D
mm
For Ø 20...25 Push-in connector 3 G1/8 193142 GRLA-1/8-QS-3-D
mm
Push-in connector 4 q 193143 GRLA-1/8-QS-4-D
mm
Push-in connector 6 q 193144 GRLA-1/8-QS-6-D
mm
Push-in connector 8 q 193145 GRLA-1/8-QS-8-D
mm

One-way flow control valves GRLZ – For supply air

Description Pneumatic connection 1 Pneumatic connection, Part no. Type
port 2
​ ​ ​ ​ ​ ​

For Ø 8...16 Push-in connector 3 M5 q 193153 GRLZ-M5-QS-3-D

mm
Push-in connector 4 q 193154 GRLZ-M5-QS-4-D
mm
Push-in connector 6 q 193155 GRLZ-M5-QS-6-D
mm
For Ø 20...25 Push-in connector 3 G1/8 193156 GRLZ-1/8-QS-3-D
mm

2023/09 –  d www.festo.com/catalogue/... 27
Round cylinder DSNU-S

Accessories
One-way flow control valves GRLZ – For supply air
Description Pneumatic connection 1 Pneumatic connection, Part no. Type
port 2
​ ​ ​ ​ ​ ​

For Ø 20...25 Push-in connector 4 G1/8 q 193157 GRLZ-1/8-QS-4-D

mm
Push-in connector 6 q 193158 GRLZ-1/8-QS-6-D
mm
Push-in connector 8 q 193159 GRLZ-1/8-QS-8-D
mm

28 d www.festo.com/catalogue/... – 2023/09