Two-dimensional PSD

S5990/S5991 series

Surface mountable,
high-accuracy position sensitive detectors

Features Applications

Surface mount type ceramic chip carrier package Light spot detection
Excellent position detectability Pointing device
Compatible with lead-free solder reflow Various types of position detection
P
 acking
Tray: S5990-01, S5991-01 Options (sold separately)
Reel: S5990-11, S5991-11
Signal processing circuit for 2-D PSD C4674-01

Structure
Parameter Symbol S5990-01/-11 S5991-01/-11 Unit
Photosensitive area A 4×4 9×9 mm
Package - Ceramic -
Window material - Silicone resin -

Absolute maximum ratings (Ta=25 °C)

Parameter Symbol Value Unit
Reverse voltage VR max 20 V
Operating temperature*1 Topr -20 to +60 °C
Storage temperature*1 Tstg -20 to +80 °C
Soldering temperature Tsol 260 (3 times)*2 °C
*1: No dew condensation. When there is a temperature difference between a product and the surrounding area in high humidity
environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in
characteristics and reliability.
*2: Reflow soldering, J EDEC J-STD-020 MSL 3, see P.7
Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.

Electrical and optical characteristics (Ta=25 °C)

S5990-01/-11 S5991-01/-11
Parameter Symbol Condition Unit
Min. Typ. Max. Min. Typ. Max.
Spectral response range λ - 320 to 1100 - - 320 to 1100 - nm
Peak sensitivity wavelength λp - 960 - - 960 - nm
Photosensitivity S λ=λp - 0.6 - - 0.6 - A/W
Interelectrode resistance Rie Vb=0.1 V 5 7 15 5 7 15 kΩ
λ=900 nm, VR=5 V,
Position detection error E - ±70 ±150 - ±150 ±250 µm
ϕ0.2 mm light spot*3
λ=900 nm, VR=5 V
Saturation photocurrent Ist - 500 - - 500 - µA
RL=1 kΩ
Dark current ID VR=5 V - 0.5 10 - 1 50 nA
VR=5 V, RL=1 kΩ
Rise time tr - 1 - - 2 - µs
λ=900 nm
Terminal capacitance Ct VR=5 V, f=10 kHz - 150 300 - 500 1000 pF
Position resolution ∆R Io=1 µA, B=1 kHz*3 - 0.7 - - 1.5 - µm
*3: Specified within a circle that is 80% of the photosensitive area. Recommended light spot size: ϕ0.2 mm or more

www.hamamatsu.com 1
 Two-dimensional PSD S5990/S5991 series

Spectral response Dark current vs. reverse voltage

(Typ. Ta=25 °C) (Typ. Ta=25 °C)
0.8 10 nA

0.7
S5991-01/-11
0.6 1 nA
Photosensitivity (A/W)

0.5

Dark current
S5990-01/-11
0.4 100 pA

0.3
Terminal capacitance vs. reverse voltage
0.2 10 pA

0.1

0 1 pA
300 400 500 600 700 800 900 1000 1100 0.1 1 10 100

Wavelength (nm) Reverse voltage (V)

KPSDB0026EA KPSDB0068EA

Terminal capacitance vs. reverse voltage

(Typ. Ta=25 °C)
10 nF

S5991-01/-11
Terminal capacitance

1 nF
KPSDB0026EA KPSDB0068EA

100 pF
S5990-01/-11

10 pF
0.1 1 10 100

Reverse voltage (V)

KPSDB0073EA

KPSDB0073EA

2
 Two-dimensional PSD S5990/S5991 series
Dimensional outline (unit: mm)

Dimensional outlines (unit: mm) Dimensional outline (unit: mm)

S5990-01/-11 S5991-01/-11

8.8 ± 0.15 14.5 ± 0.2

(4 ×) R0.3
(4 ×) R0.3 Y2 Y2
Photosensitive area
4.0 Photosensitive area
10.6 ± 0.2

9.0

16.5 ± 0.2
X1 X2
X1 X2

Y1
Index mark
1.26 ± 0.15
Photosensitive Silicone Y1
0.46

surface resin

1.26 ± 0.15
Photosensitive Silicone

0.46
surface resin
2.5
1.5
1.5

1.8

3.0
(10 ×) 0.6
1.27

1.8
Burrs shall protrude no more than 0.3 mm on any side of package.
(10 ×) 1.2 2.54
Anode X1 (I1)
NC
NC Burrs shall protrude no more than 0.3 mm on any side of package.
NC
Anode Y1 (I3) Anode X1 (I1)
Anode X2 (I2) NC
NC NC
Cathode NC
NC Anode Y1 (I3)
Anode Y2 (I4) Anode X2 (I2)
NC
pin should be open-circuited. Cathode
KPSDA0044EB NC
Anode Y2 (I4)

pin should be open-circuited.

KPSDA0044EB KPSDA0045EA

KPSDA0045E
Conversion formula
(I2 + I3) - (I1 + I4) 2x
=
I1 + I2 + I3 + I4 L
(I2 + I4) - (I1 + I3) 2y
=
I1 + I2 + I3 + I4 L
x, y: Position coordinates of light spot
S5990-01: L=4.5 mm
S5991-01: L=10 mm

3
 Two-dimensional PSD S5990/S5991 series

Example of position detectability (Ta=25 °C, λ=900 nm, light spot size: ϕ0.2 mm)

S5990-01/-11 S5991-01/-11

Scan interval: 1 mm

ecommended land pattern (unit: mm) Scan interval: 0.4 mm

Recommended land pattern (unit: mm)

KPSDC0064EA KPSDC0065EA

Recommended land patterns (unit: mm)

S5990-01/-11 S5991-01/-11

y: 2.8 min.
y: 2.5 min.

1.0 min.
1.0 min.

x: 0.6 max. x: 1.2 max.

PSD
KPSDC0064EA
KPSDC0095EA KPSDC0065E
PSD
1. Solder all terminals. KPSDC0094EC

2. Do not make the land area larger than necessary.

3. It is preferable that the land sizes be about equal. 1. Solder all terminals.
1.4.Solder
Make land width x about the same as the terminal width.
all terminals. 2. Do not make the land area larger than necessary.
2.5.Do
Make land height y at least 1 mm longer than the terminal height,
not make the land area larger than necessary. 3. It is preferable that the land sizes be about equal.
protruding outside the package. 4. Make land width x about the same as the terminal width.
3. It is preferable that the land sizes be about equal.
5. Make land height y at least 1 mm longer than the terminal height,
4. Make land width x about the same as the terminal width. protruding outside the package.
5. Make land height y at least 1 mm longer than the terminal height, protruding outside the package.

KPSDC0095EA
KPSDC0094E

4
 Two-dimensional PSD S5990/S5991 series

Standard packing specifications

S5990-01, S5991-01
P
 acking quantity
S5990-01: 100 pcs max./tray
S5991-01: 50 pcs max./tray

P
 acking state
Tray and desiccant in moisture-proof packaging (vacuum-sealed)

S5990-11
R
 eel (conforms to JEITA ET-7200)

Outer diameter
nsional outline (unit: mm)
Hub diameter Tape width Material Electrostatic characteristics
ϕ254 mm ϕ100 mm 24 mm PS Conductive

E
 mbossed tape (unit: mm, material: PS, conductive)
1.75 ± 0.1

+0.1
ɸ1.5 - 0 4.0 ± 0.1 2.0 ± 0.1 0.4 ± 0.05
11.5 ± 0.1
24.0 ± 0.3

16.0 ± 0.1
9.4 ± 0.1
(10.75)

16.0 ± 0.1 1.7 ± 0.1

11.2 ± 0.1
7.1 ± 0.1

KPINC0036EA

P
 acking quantity
1000 pcs/reel
KPINC0036EA

P
 acking state
Reel and desiccant in moisture-proof packaging (vacuum-sealed)

5
 Two-dimensional PSD S5990/S5991 series

S5991-11
R
 eel (conforms to JEITA ET-7200)

nsional outline (unit: Reel

mm) diameter Hub diameter Tape width Material Electrostatic characteristics
ϕ330 mm ϕ80 mm 24 mm PS Conductive

E
 mbossed tape (unit: mm, material: PS, conductive)

1.75 ± 0.1
+0.1
ɸ1.5 - 0 4.0 ± 0.1 2.0 ± 0.1 0.3

11.5 ± 0.1
24.0 ± 0.3

16.9
20.0 ± 0.1 (10.75) 1.7 ± 0.15

14.9 ± 0.1

KPINC0037EA

P
 acking quantity
100 pcs/reel

KPINC0037EA
P
 acking state
Reel and desiccant in moisture-proof packaging (vacuum-sealed)

6
 Two-dimensional PSD S5990/S5991 series

Recommended reflow soldering conditions

300 °C
Peak temperature Peak temperature - 5 °C
260 °C max. 30 s max.
Temperature increase Cooling
3 °C/s max. 6 °C/s max.
217 °C
200 °C
Temperature

150 °C

Preheat Soldering
60 to 120 s 60 to 150 s

Time
KMPDB0405EB

Precautions
‧T
 his product’s light input window uses soft silicone resin. Stain or scratch in the light input window degrades the sensitivity. Avoid contact
with the light input window, as applying external force to the resin surface may cause the wire to deform and break.
‧W
 hen soldering, use rosin-based flux to prevent terminal corrosion. Solder at 260 ° C or less within 5 seconds without moisture absorption.
Check carefully the conditions of reflow soldering, since they vary depending on the board and reflow oven in use.
‧S
 ilicone resin swells with organic solvents. So do not use anything other than alcohol.
‧A
 void opening the bag until immediately before using the product so as to prevent oxidation or contamination of terminals or moisture
absorption of resin filling.
In addition, if 3 months have passed in an unopened state or 168 hours have passed after opening, bake in nitrogen atmosphere for 3
to 5 hours at 150 °C, or for 12 to 15 hours at 120 °C before use. KMPDB0405EB

7
 Two-dimensional PSD S5990/S5991 series

Related information
https://www.hamamatsu.com/sp/ssd/doc_en.html

Precautions
‧ Disclaimer
‧ Surface mount type products

Technical information
‧ PSD

Information described in this material is current as of June 2020.

Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the
information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always
contact us for the delivery specification sheet to check the latest specifications.
The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that
one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.
Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.

www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81)53-434-3311, Fax: (81)53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218, E-mail: [email protected]
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-265-8, E-mail: [email protected]
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: [email protected]
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777, E-mail: [email protected]
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46)8-509 031 00, Fax: (46)8-509 031 01, E-mail: [email protected]
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93 58 17 33, Fax: (39)02-93 58 17 41, E-mail: [email protected]
China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, 100020 Beijing, P.R.China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866, E-mail: [email protected]
Taiwan: Hamamatsu Photonics Taiwan Co., Ltd.: 8F-3, No. 158, Section2, Gongdao 5th Road, East District, Hsinchu, 300, Taiwan R.O.C. Telephone: (886)3-659-0080, Fax: (886)3-659-0081, E-mail: [email protected]
8
Cat. No. KPSD1010E09 Jun. 2020 DN