Scribd
Upload
6 views6 pages

BITAXE_guide

The Bitaxe Ultra is an open-source Bitcoin ASIC miner that operates at 500 GH/s with a low power consumption of 12W, utilizing the BM1366 ASIC chip. It features an intuitive web interface for easy configuration and monitoring, and is powered by a 5V DC supply. Users can set up the miner in just five minutes by connecting to its WiFi network and configuring mining parameters through the web portal.

Uploaded by

Tebogo S Twala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views6 pages

BITAXE_guide

The Bitaxe Ultra is an open-source Bitcoin ASIC miner that operates at 500 GH/s with a low power consumption of 12W, utilizing the BM1366 ASIC chip. It features an intuitive web interface for easy configuration and monitoring, and is powered by a 5V DC supply. Users can set up the miner in just five minutes by connecting to its WiFi network and configuring mining parameters through the web portal.

Uploaded by

Tebogo S Twala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

BITRONICS

BITRONICS
BITRONICS
BITRONICS
BITRONICS
500Ghs

g b y
r n i n
L e a
d i n g
buil

500Ghs LOW POWER EASY TO OPEN

NER
12W CONSUMPTION CONFIGURE SOURCE
Bitaxe Ultra is a fully open-source Bitcoin ASIC miner
equipped with the BM1366 ASIC chip from Antminer's
S19XP.

This design ensures efficient and powerful mining


capabilities, achieving 500 GH/s at an energy efficiency
of 20 J/TH. It operates using a 5V DC power supply
connected via a 2.1/5.5mm barrel jack connector.

At the core of Bitaxe Ultra is the combination of ESP-


miner and AxeOS, an open-source firmware that
empowers you with full control over your mining
operations. The intuitive web interface simplifies setting
adjustments and performance monitoring, making
mining more accessible and streamlined.

BM1366 MINER AXEOS


ASIC CHIP STATS SCREEN WEBCONFIG
500 Ghs Bitmain Standard mining Global minery data
ASIC chip working at data, hashrate, current hashrate,
low temperature uptime, efficiency, miner config, logs...
with fan shares...

BITAXE MINER
If you want to check all the Bitaxe
details check the full guide scaning the
QR code.
For any other question contact Bitronics
team.

TOOLS
NEEDED
Required time: 5 minutes

1 - Power up your Bitaxe with its power


adapter (5V /4A). Important: Don’t use
2
any other power adapter.

2 - Wait until the text "Connect to


ssid: Bitaxe_XXXX" appears on the 1
screen, and then from a mobile phone
search for the Bitaxe_XXXX wifi
network and connect to it.
3 2
3 - Once connected, the following 4
menu will be shown (3). 5
Click on Settings to setup.
4 - Setup miner parameters:
WiFi/Password: network
credentials were you want to
connect to.
Pool url/port: introduce your
pool settings or leave default
BTC address: BTC address
where you will receive prize.
4 - Press Save and Restart. After
this Bitaxe will start working.
For any problem check full guide or
contact Bitronics team. 5

BITAXE MINER
OLED SCREEN
ESP32S3

USB-C
2,1 JACK - 5V/4A

FAN BM1366 ASIC

Vcc:
Vcc: 5V
5V Wifi: only 2.4GHz
Imax:
Imax: 3A
300mA MCU: ESP32-S3R8 Dual-core
P: 12W~15W
P: 1W LX7 microprocessor
USB
USB type:
type: USB-C
USB-C ASIC: BM1366AG

Powered by the S19XP BM1366 ASIC chip

Easy to setup, fully assembled, configure and play

ASIC Tunning via config portal, find your work

Web config portal to setup your mining data

BITAXE MINER
TOOLS
NEEDED

1 - Power up your Bitaxe with its power


adapter (5V /4A). Important: Don’t use
any other power adapter. 2
1
2 - Wait until the text "Connect to
ssid: Bitaxe_XXXX" appears on the
screen, and then from a mobile phone
search for the Bitaxe_XXXX wifi
network and connect to it.

3 - Once connected, the following


menu will be shown (3).
Click on Settings to setup.

4 - Set your mining settings and then (5) press Save and Restart.
After this Bitaxe will start working.

3 4

BITAXE MINER
Setup miner parameters:
WiFi/Password: network credentials
were you want to connect to. Get
your home Wifi name and password
and add it there.

Stratum url/port: introduce your


pool settings or leave default ones.
Check compatible pools at
bitaxe.org. Standard ones:

URL Port

public-pool.io 21496

pool.vkbit.com 3333

Stratum user: set your BTC address


followed by your worker name.
<btcAddress>.<workerName>

Stratum password: left default


value or specify one for pools who
require.

Frequency: ASIC work freq.

Core voltage: ASIC core voltage.

ASIC TUNNING METHODOLOGY

Playing with frequency and core voltage let you


find the best working point with your ASIC.
Increasing or reducing hashrate or power
consumption. Be carefull to not force it too
much. Default values are the recommended
ones.

BITAXE MINER

You might also like