Designed By: AAMIR Rev. No.
Date: 25.05.2022
Subject:
Checked By:
Project: HALDIRAM AT NAGPUR
BEAM DESIGN:
fck = 25
fy = 500 0.133
Factor = 3.325
pt,lim factor = 18.87
fsc = 412
C eff. (Effective cover at tension side)
C'eff. (for compression)= (Effective cover at compression si
NBF 25
Design Required Depth
Width of Beam
CONTINUOUS Moment Depth Provided
EQUAL SPANS
Mu (kN-m) B dreq. Dpro.
AT SUPPORT 102.9 1000 175.92 350.00
FIRST SPAN AT MIDDLE 1000 0.00 350.00
AT SUPPORT 1000 0.00 350.00
Wall Main R/F 10 # @ 100 C/C
R1
AT FIRST FLOOR
PC Designs Pvt Ltd
Effective cover at tension side)
Effective cover at compression side)
Required 1 st Set of Stirrups
Concrete Effective % Tension Area of tension
Cover Depth
K
steel steel
End Span
Ceff.
dpro. Mu/bd2 pt AST (mm2) Dia.(mm) No. of Legs
(tension r/f)
40.00 310.00 1.07 0.260 806.2 8 4
40.00 310.00 0.00 0.000 0 Middle Span
40.00 310.00 0.00 0.000 0.0 8 4
1 st Set of Stirrups near to support 2 nd Set of Stirrups @ 2d From
Span Shear Calculation at Support Middle Span
Shear Total Shear Design
Spacing Resisted Shear Spacing
(mm) By Stirrups Resistance Force (Vu) Status Dia. (mm) No. of Legs
(mm)
(Vus) in KN (Vu) in KN in KN
80 281.3 281.3 75 SAFE End Span
le Span 10 4 150
80 281.3 281.3 590 REVISE STRR. End Span
et of Stirrups @ 2d From support on either side Compression Side Steel Calculation
Area of
compressio % tension
Shear Calculation at Span n side steel
compression
steel
Shear Total Shear Design
Ceff.
Resisted Shear
Status (compressi pt Asc (mm2)
By Stirrups Resistance Force (Vu)
(Vus) in KN (Vu) in KN on r/f)
in KN
40 0.349 0.00
234.42 234.42 50 SAFE 40 0.066 0.00
40 0.066 0.00
Remark
Singly Reinforced beam
Singly Reinforced beam
Singly Reinforced beam
