Scribd
Upload
14 views1 page

CSF-308MoP_EN_2014

Uploaded by

Kamille Vitug
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views1 page

CSF-308MoP_EN_2014

Uploaded by

Kamille Vitug
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CSF-308MoP

For 18%Cr-8%Ni-2%Mo Stainless steel AWS A5.22 E308MoT1-1/-4


JIS Z3323 TS308Mo-FB1
For Gas Shielded Arc Welding
Flux Cored Wire

Applications
CSF-308MoP is suitable for Welding of 18%Cr-8%Ni-2%Mo Stainless steel.

Characteristics
(1) CSF-308MoP is flux cored wire and designed for Fillet & H-F(All-position) welding with
CO2 gas Shielding.
(2) It provides the excellent usability with stable arc, less spattering, good bead appearance,
better slag removal, and less quantity of welding fume comparable to solid wire.
(3) Is containing Ferrite of a reasonable quantity and crack-resistance, integranular
corrosion resistance, mechanical properties of weld metal is superior.
(4) Shield gas is 100%CO2 or Ar+CO2 gas.

Notes on usage
(1) The optimum flow of CO2 for Shielding is 20~25ℓ/min.
(2) Protect the weld with a screen to prevent blowholes caused by wind where the wind ve-
locity is 2m/sec and more.
(3) Keep the distance between tip & base metal at 15~25mm.

Typical chemical composition of weld metal (%) (Shielding Gas : 100%CO2)

C Mn Si P S Cr Ni Mo F/N
0.03 1.00 0.60 0.03 0.02 19.6 10.0 2.5 20

Typical mechanical properties of weld metal (Shielding Gas : 100%CO2)

YP TS EL
N/mm2 (MPa) N/mm2 (MPa) %
495 673 35.0

Size & recommended current range (AC or DC±)


Dia. mm (in) Current(A) Voltage(V) Welding Speed(cm /min)
1.2(0.045) 150~300 24~33 20~60
1.6(0.062) 200~400 24~33 20~60

198

You might also like