Scribd
Upload
67 views2 pages

Best WC23E

The document provides specifications for the WC23E Series range hoods, including: - Features such as Italian design, wall mount, stainless steel or brushed copper finish, halogen lighting, electronic push-button controls, and a heat sensor that automatically increases blower speed. - Optional accessories like replacement filters, flue extensions, an interior blower version, and duct transitions. - Technical specifications for blowers such as CFM ratings and voltage/amperage requirements. - Mounting instructions including minimum and maximum heights above cooking surfaces and bracket locations for different ceiling heights.

Uploaded by

PurcellMurray
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views2 pages

Best WC23E

The document provides specifications for the WC23E Series range hoods, including: - Features such as Italian design, wall mount, stainless steel or brushed copper finish, halogen lighting, electronic push-button controls, and a heat sensor that automatically increases blower speed. - Optional accessories like replacement filters, flue extensions, an interior blower version, and duct transitions. - Technical specifications for blowers such as CFM ratings and voltage/amperage requirements. - Mounting instructions including minimum and maximum heights above cooking surfaces and bracket locations for different ceiling heights.

Uploaded by

PurcellMurray
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SPECIFICATION SHEET

WC23E SERIES RANGE HOODS


Is it sculpture or functional contemporary art? Anyway you look at it, the graceful curve and stunning simplicity are sure to command a closer look. FEATURES SPECIFICATIONS
WITH OPTIONAL BLOWER MODELS EB6 BLOWER CFM 600 max. wall or roof mount remote blowers 900 max. 1200 max. 1500 max. 120 ILB3 ILB6 ILB9 ILB11 attic installed inline blowers 280 max. 600 max. 800 max. 1100 max. 0.43 (lights only) + 6.0 max. (blower only) VOLTS AMPS DUCT

Italian design Wall mount Finish: 304 Stainless Steel #4 Brushed; brushed copper Widths: 35-7/16 (90 cm) Telescopic flue accommodates 8 to 9 ceilings 8-in. round duct connector/backdraft damper Halogen lighting (2 x 20 watt, Type JC 12V 20W G4

EB9 EB12 EB15

8-in. round at the hood. See blower specs for duct requirements.

Base - bulbs included) with multilevels from bright cooktop illumination to a low nighttime setting Advanced, electronic push-button controls feature delay shutoff Use with exterior-mounted or attic-installed remote blowers for different levels of exhaust capacity (see specifications) Delay timer control automatically shuts off range hood after ten minutes Special control indicates when its time to clean the filter Dishwasher-safe filter features a quick-release latch and decorative cover plate Heat SentryTM - automatically turns blower to high speed when excess cooking heat is detected

OPTIONS

Replacement grease filters available (Part No. SB08087194) Flue extensions for 10 ceilings (Model AEWC23 series) available in stainless steel or copper (36-3/4 long) Interior blower version (WC23I Series) available, providing 410 cfm exhaust 8-in. to 10-in. transition (Model 414)

BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027 REFERENCE QTY. REMARKS Project Location Architect Engineer Contractor Submitted by 60J Date 99043779A

WC23E SERIES WIRING


EXTERIOR OR IN-LINE BLOWER

120 Volt, 60 Hz LINE IN

CONNECT: WHITE-TO-WHITE, BLACK-TO-BLACK, GREEN-TO-GROUND

BOX MARKED 120 VAC INPUT

CONNECT: WHITE-TO-WHITE, RED-TO-BLACK, GREEN-TO-GROUND

BOX MARKED MOTOR CONNECTION

WC23E SERIES MOUNTING


Diagram A
WOOD CROSS SUPPORT SECURED TO FRAMING AND LOCATED BEHIND DRYWALL FRAMING BEHIND WOOD CROSS SUPPORT

Diagram B

BOTTOM EDGE OF HOOD GLASS

L C L
1/2 MINIMUM

5
9-1/2 TO 15-1/2 ABOVE COOKING SURFACE (See chart for additional mounting height restrictions)
CEILING HEIGHT

1 16 "

MOUNTING BRACKET LOCATION (ABOVE 36 HIGH COOKTOP)

DRYWALL
HOOD DISTANCE ABOVE 36 HIGH COOKTOP (see note A) 9-1/2 10-1/2 11-1/2 12-1/2 13-1/2 14-1/2 15-1/2

MOUNTING BRACKET LOCATION ABOVE 36 HIGH COOK TOP 8 FEET 9 FEET 10 FEET (see note B) 38 39 40 38 39 40 41 41 41 42 42 43 43 44 44

A. Minimum hood distance above cooktop must not be less than 9-1/2 (see Diagram B). Bottom of glass must clear the top of the range by at least 1/2. A maximum of 15-1/2 above the cooktop is highly recommended for best capture of cooking impurities. Distances over 15-1/2 above the cooktop are at the installers and users discretion - providing that ceiling height and flue length permit. B. Requires optional 10-ft. flue extension - ducted Model AEWC23xB.

BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027

You might also like