Satellite® M30X/M35X

Series Resource Guide

Keep this guide in a convenient place to access important

information about your computer.

If you need assistance, use one of the following:

❖ Toshiba’s Support Website

pcsupport.toshiba.com
❖ Toshiba Global Support Centre
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273

Please fill in for your reference and future use:

Model name______________________________________

Part number______________________________________

Serial number ____________________________________

RG 5.375 x 8.375 ver 2.3.3

2

Contents
Introduction ...................................................................................... 27
Setting up your computer and getting started................................... 28
Your computer’s TFT display ............................................................. 36
Inserting a PC Card........................................................................... 37
Removing a PC Card......................................................................... 37
Learning the basics........................................................................... 38
Using the DVD-ROM or multi-function drive..................................... 40
Moving the computer........................................................................ 45
Mobile computing............................................................................. 45
Disposing of used batteries safely .................................................... 51
If something goes wrong .................................................................. 51
If you need further assistance........................................................... 55
Toshiba voice contact ....................................................................... 56
Power cord/cable connectors ........................................................... 57
Features and specifications............................................................... 57
Index ................................................................................................ 63

5.375 x 8.375 ver 3.1

 3

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.

Regulatory information
Model: Satellite® M30X/M35X Series

ReWritable CD/DVD Drives

The computer system you purchased may include a ReWritable CD and/or
DVD drive(s), among the most advanced data storage technologies
available. As with any new technology, you must read and follow all set-up
and usage instructions in the applicable user guides and/or manuals
enclosed. If you fail to do so, this product may not function properly and
you may lose data or suffer other damage. TOSHIBA AMERICA
INFORMATION SYSTEMS (“TOSHIBA”), ITS AFFILIATES AND
SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE
PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU
AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS
SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS
OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR
REMOVABLE STORAGE MEDIA ARISING OUT OF OR
RESULTING FROM THE USE OF THE PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the
data stored on the hard disk or other storage devices as a precaution against
possible failures, alteration, or loss of the data. IF YOUR DATA IS
ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR
MALFUNCTION OF THE HARD DISK DRIVE OR OTHER
STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED,
TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS
OF DATA, OR ANY OTHER DAMAGE RESULTING
THEREFROM. WHEN COPYING OR TRANSFERRING YOUR
DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA
HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO
COPY OR TRANSFER THE DATA CORRECTLY.

5.375 x 8.375 ver 3.1

4

Critical Applications
The computer you have purchased is not designed for any “critical
applications.” “Critical applications” means life support systems, medical
applications, connections to implanted medical devices, commercial
transportation, nuclear facilities or systems or any other applications where
product failure could lead to injury to persons or loss of life or catastrophic
property damage. ACCORDINGLY, TOSHIBA, ITS AFFILIATES
AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY
ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN
ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER
PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT
TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity”

Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
❖ Reorient or relocate the receiving antenna.
❖ Increase the separation between the equipment and receiver.
❖ Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
❖ Consult the dealer or an experienced radio/TV technician for help.

Only Peripherals complying with the FCC Class B limits may be attached to
this equipment. Operation with noncompliant peripherals or peripherals not
recommended by Toshiba is likely to result in interference to radio and TV
reception. Shielded cables must be used between the external devices and
the computer's parallel port, monitor port, USB port, PS/2 port®, i.LINK®
port and microphone jack. Changes or modifications made to this equipment
not expressly approved by Toshiba or parties authorized by Toshiba could
void the user's authority to operate the equipment.

5.375 x 8.375 ver 3.1

 5
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
❖ This device may not cause harmful interference.
❖ This device must accept any interference received, including
interference that may cause undesired operation.
Contact either:
❖ Toshiba’s Support Website at pcsupport.toshiba.com
❖ Or call the Toshiba Global Support Centre:
Within the United States at (800) 457-7777
Outside the United States at (949) 859-4273

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conformé à la norme NMB-003
du Canada.

FCC Requirements
The following information is pursuant to FCC CFR 47, Part 68 and refers
to internal modems.
This equipment complies with Part 68 of the FCC rules. On the bottom of
this equipment is a label that contains, among other information, the FCC
registration number and ringer equivalence number (REN) for this
equipment. If requested, the information must be provided to the telephone
company.
The modem connects to the telephone line by means of a standard jack
called the USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC part 68 rules and
requirements adopted by the ACTA. It is designed to be connected to a
compatible modular jack that is also compliant.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five (5.0). To be certain of
the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company. For products approved
after July 23, 2001, the REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by the
## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For
earlier products, the REN is separately shown on the label.

5.375 x 8.375 ver 3.1

6
Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation
commission for information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it
can. In order to do this, it may occasionally be necessary for them to make
changes in their equipment, operations or procedures. If these changes
might affect your service or the operation of your equipment, the telephone
company will give you notice, in writing, to allow you to make any changes
necessary to maintain uninterrupted service.

If Problems Arise
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advanced notice is not practical, the
telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe
it is necessary.
If trouble is experienced with this equipment, for repair or limited warranty
information, please contact Toshiba Corporation, Toshiba America
Information Systems, Inc. or an authorized representative of Toshiba, or the
Toshiba Support Centre within the United States at (800) 457-7777 or
Outside the United States at (949) 859-4273. If the equipment is causing
harm to the telephone network, the telephone company may request that
you disconnect the equipment until the problem is resolved.

Disconnection
If you should ever decide to permanently disconnect your modem from its
present line, please call the telephone company and let them know of this
change.

Fax Branding
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device, including Fax
machines, to send any message unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page of
the transmission, the date and time it is sent and an identification of the
business or other entity, or other individual sending the message and the
telephone number of the sending machine or such business, other entity, or
individual. (The telephone number provided may not be a 900 number or

5.375 x 8.375 ver 3.1

 7
any other number for which charges exceed local or long-distance
transmission charges.)
In order to program this information into your fax transmission, refer to the
fax software instructions installed on this computer.

Alarm Equipment
If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this equipment does not disable
your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1 NOTICE: The Industry Canada label identifies certified equipment.
This certification means that the equipment meets certain
telecommunications network protective, operational and safety
requirements as prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The Department does not
guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. The customer should be
aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be coordinated by a
representative designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may
give the telecommunications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas.
Caution: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority, or electrician, as appropriate.
2 The user manual of analog equipment must contain the equipment’s
Ringer Equivalence Number (REN) and an explanation notice similar
to the following:
The Ringer Equivalence Number (REN) of this device can be found
on the label affixed to your computer.
NOTICE: The Ringer Equivalence Number (REN) assigned to each
terminal device provides an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The

5.375 x 8.375 ver 3.1

8
termination on an interface may consist of any combination of devices
subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
3 The standard connecting arrangement (telephone jack type) for this
equipment is jack type(s): USOC RJ11C.

Wireless Interoperability
The TOSHIBA Wireless LAN Mini PCI Card products are designed to be
interoperable with any wireless LAN product that is based on Direct
Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:
❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as
defined and approved by the Institute of Electrical and Electronics
Engineers.
❖ The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi
Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the
Wi-Fi Alliance.

Bluetooth™ and Wireless LAN devices operate within the same radio
frequency range and may interfere with one another. If you use Bluetooth™
and Wireless LAN devices simultaneously, you may occasionally
experience a less than optimal network performance or even lose your
network connection.
If you should experience any such problem, immediately turn off your Blue-
tooth™ or Wireless LAN device.
Please contact Toshiba PC product support on Web site http://www.toshiba-
europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in
the United States for more information.

This device is restricted to indoor use due to its operation in the 5.15 GHz to
5.25 GHz frequency range.

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by Wireless LAN
devices however is far much less than the electromagnetic energy emitted
by wireless devices like for example mobile phones.
Because Wireless LAN products operate within the guidelines found in
radio frequency safety standards and recommendations, TOSHIBA
believes Wireless LAN is safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.

5.375 x 8.375 ver 3.1

 9
In some situations or environments, the use of Wireless LAN may be
restricted by the proprietor of the building or responsible representatives of
the organization. These situations may for example include:
❖ Using the Wireless LAN equipment on board airplanes, or
❖ In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices
in a specific organization or environment (e.g. airports), you are
encouraged to ask for authorization to use the Wireless LAN device prior to
turning on the equipment.

Regulatory Information
The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in
strict accordance with the manufacturer’s instructions as described in the
user documentation that comes with the product. This device complies with
the following radio frequency and safety standards.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be
co-located with any other transmitter that has not been tested with this
device.

Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
L’utilisation de ce dispositif est autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du
dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
The term “IC” before the equipment certification number only signifies that
the Industry Canada technical specifications were met.
To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.

5.375 x 8.375 ver 3.1

10
Pour empecher que cet appareil cause du brouillage au service faisant
l'objet d'une licence, il doit etre utilize a l'interieur et devrait etre place loin
des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel
(ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet
d'une licence.

Europe – EU Declaration of Conformity

This device complies with the essential requirements of the R&TTE
Directive 1999/5/EC with essential test suites as per standards:
❖ EN 60950 Safety of Information Technology equipment.
❖ ETS 300 328 Technical requirements for radio equipment.
❖ ETS 300 826 General EMC requirements for radio equipment.

English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares

that this Radio LAN device is in compliance with the essential require-
ments and other relevant provisions of Directive 1999/5/EC.
Finnish: Valmistaja TOSHIBA Corp. Digital Media Network Company vakuut-
taa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Dutch: Hierbij verklaart TOSHIBA Corp. Digital Media Network Company dat
het toestel Radio LAN device in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Bij deze TOSHIBA Corp. Digital Media Network Company dat deze
Radio LAN device voldoet aan de essentiële eisen en aan de overige rel-
evante bepalingen van Richtlijn 1999/5/EC.
French: Par la présente TOSHIBA Corp. Digital Media Network Company
déclare que l'appareil Radio LAN device est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/
CE.
Par la présente, TOSHIBA Corp. Digital Media Network Company
déclare que ce Radio LAN device est conforme aux exigences essen-
tielles et aux autres dispositions de la directive 1999/5/CE qui lui sont
applicables.
Swedish: Härmed intygar TOSHIBA Corp. Digital Media Network Company att
denna Radio LAN device står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Danish: Undertegnede TOSHIBA Corp. Digital Media Network Company erk-
lærer herved, at følgende udstyr Radio LAN device overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF

5.375 x 8.375 ver 3.1

 11
German: Hiermit erklärt TOSHIBA Corp. Digital Media Network Company, dass
sich dieser/diese/dieses Radio LAN device in Übereinstimmung mit den
grundlegenden Anforderungen und den anderen relevanten Vorschriften
der Richtlinie 1999/5/EG befindet". (BMWi)
Hiermit erklärt TOSHIBA Corp. Digital Media Network Company die
Übereinstimmung des Gerätes Radio LAN device mit den grundleg-
enden Anforderungen und den anderen relevanten Festlegungen der
Richtlinie 1999/5/EG. (Wien)
Greek:

Italian: Con la presente TOSHIBA Corp. Digital Media Network Company

dichiara che questo Radio LAN device è conforme ai requisiti essenziali
ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Spanish: Por medio de la presente TOSHIBA Corp. Digital Media Network
Company declara que el Radio LAN device cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Portuguese: TOSHIBA Corp. Digital Media Network Company declara que este
Radio LAN device está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.

USA – Federal Communications Commission

(FCC)
This device complies with Part 15 of FCC Rules. Operation of the devices
in a Wireless LAN System is subject to the following two conditions:
❖ This device may not cause harmful interference.
❖ This device must accept any interference that may cause undesired
operation.
TOSHIBA is not responsible for any radio or television interference caused
by unauthorized modification of the devices included with this TOSHIBA
Wireless LAN Mini PCI Card, or the substitution or attachment of
connecting cables and equipment other than specified by TOSHIBA.
The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.

5.375 x 8.375 ver 3.1

12

Caution: Exposure to Radio Frequency

Radiation
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card
is far below the FCC radio frequency exposure limits. Nevertheless, the
TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner
that the potential for human contact during normal operation is minimized.
In normal operating configuration, the LCD in the upright position, the
distance between the antenna and the user should not be less than 20 cm.
The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. Antenna(s) used in
5.15 GHz to 5.25 GHz frequency band must be integral antenna which
provide no access to the end user.
Refer to the Regulatory Statements as identified in the documentation that
comes with those products for additional information.

Caution: Radio Frequency Interference

Requirements
This device is restricted to indoor use due to its operation in the 5.15 GHz
to 5.25 GHz frequency range. FCC requires this product to be used indoors
for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel Mobile Satellite systems.
High power radars are allocated as primary users of the 5.25 GHz to 5.35
GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this device.

The above Caution information applies to products that operate with an

802.11a device.

Taiwan
Article 14 Unless approved, for any model accredited low power radio frequency elec-
tric machinery, any company, trader or user shall not change the frequency,
increase the power or change the features and functions of the original
design.
Article 17 Any use of low power radio frequency electric machinery shall not affect
aviation safety and interfere with legal communications. In the event inter-
ference is caused, the use of such electric machinery shall be immediately
discontinued. Operation of such products can be resumed only when they are
modified and can no longer cause interference.

5.375 x 8.375 ver 3.1

 13
The legal communications mentioned in the above item refer to radio
communications operated in accordance with telecommunication laws and
regulations.
Low power radio frequency electric machinery shall resist against
interference from legal communications or from industrial, scientific and
medical radio emission electric machinery.

Using This Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for
second generation low-power data communication systems such as this
equipment overlaps that of mobile object identification systems (premises
radio station and specified low-power radio station).
1. Sticker
Please put the following sticker on devices incorporating this product.

2. Indication
The indication shown below appears on this equipment.
(1) (2) (3)

2.4DSOF4

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz.

2 DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3 The interference range of this equipment is less than 40m.
4 This equipment uses a frequency bandwidth from 2,400
MHz to 2,483.5 MHz.
It is possible to avoid the band of mobile object identification systems.
3. TOSHIBA Direct PC
Monday – Friday: 10:00 – 17:00
Toll Free Tel: 0120-13-1100
Direct Dial: 03-3457-5916
Fax: 03-5444-9450

5.375 x 8.375 ver 3.1

14

Device Authorization
This device obtains the Technical Regulation Conformity Certification and
the Technical Conditions Compliance Approval, and it belongs to the
device class of radio equipment of low-power data communication system
radio station stipulated in the Radio Law and the Telecommunications
Business Law of Japan.
The Name of the radio equipment: refer to the equipment label provided on
the computer
JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS
EQUIPMENT
Approval Number: D01-1128JP
TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018,
03GZDA0017
The following restrictions apply:
❖ Do not disassemble or modify the device.
❖ Do not install the embedded wireless module into other device.
❖ 5.17 GHz to 5.23 GHz for indoor use only

Radio Approvals for Wireless Devices

The following information is dependent on what type of wireless device is in
your computer.

Approved Countries/Regions for Use for the Atheros

AR5BMB-43/44 Mini PCI Wireless Network Adapter
This equipment is approved to the radio standard by the countries/regions
in the following table.

Do not use this equipment except in the countries/regions in the following

table.

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

5.375 x 8.375 ver 3.1

 15
802.11b (2.4 GHz)
Australia Austria Belgium
Canada Denmark Finland
France Germany Greece
Ireland Italy Liechtenstein
Luxembourg Netherlands New Zealand
Norway Portugal Sweden
Switzerland UK USA

Europe - Restrictions for Use of 2.4 GHz Frequencies in

European Community Countries
België/ For private usage outside buildings across public grounds over less than
Belgique: 300m no special registration with IBPT/BIPT is required. Registration to
IBPT/BIPT is required for private usage outside buildings across public
grounds over more than 300m. For registration and license please con-
tact IBPT/BIPT.
Voor privé-gebruik buiten gebouw over publieke groud over afstand
kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik
over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig.
Voor registratie of licentie kunt u contact opnemen met BIPT.
Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-des-
sus d’un espace public, aucun enregistrement n’est nécessaire pour une
distance de moins de 300m. Pour une distance supérieure à 300m un
enregistrement auprès de I’IBPT est requise. Pour les enregistrements et
licences, veuillez contacter I’IBPT.
Deutschland: License required for outdoor installations. Check with reseller for proce-
dure to follow.
Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungsp-
flichtig.Bitte mit Händler die Vorgehensweise abstimmen.
France: Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454
MHz respectively) may be used outdoors in France. Please contact
A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.
Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz
respectivement) doivent être utilisés endroits extérieur en France. Vous
pouvez contacter I’Autorité de Régulation des Télécommuniations
(http://www.art-telecom.fr) pour la procédure à suivre.
Italia: License required for indoor use. Use with outdoor installations not
allowed.
E’necessaria la concessione ministeriale anche per l’uso interno.
Verificare con i rivenditori la procedura da seguire.

5.375 x 8.375 ver 3.1

16
Nederland: License required for outdoor installations. Check with reseller for proce-
dure to follow.
Licentie verplicht voor gebruik met buitenantennes. Neem contact op
met verkoper voor juiste procedure.

802.11a (5 GHz)
Australia Austria Belgium
Canada Denmark Finland
France Germany Greece
Ireland Italy Liechtenstein
Luxembourg Netherlands New Zealand
Norway Portugal Sweden
Switzerland UK USA

Turbo Mode (5 GHz)

Canada USA

Europe - Restrictions for Use of 5 GHz Frequencies in

European Community Countries
European Community 5150-5250 MHz 5250-5350 MHz 5470-5725 MHz
Countries Channels: 36, 40, 44, Channels: 52, 56, 60, Channels: 100, 104, 108, 112,
48 64 116, 120, 124, 128, 132, 136, 140

Indoor Only Indoor Only Indoor/Outdoor

Austria O x x
Belgium, France, Swit- O O x
zerland/Lichtenstein
Denmark, Finland, Ger- O O O
many, Greece, Ireland,
Italy, Luxembourg, Neth-
erlands, Norway, Portu-
gal, Sweden, UK
Iceland, Spain O O O
O: allowed ×: forbidden
❖ To remain in conformance with European spectrum usage laws for
Wireless LAN operation, the above 2.4 GHz and 5 GHz channel
limitations apply. The user should use the wireless LAN utility to
check the current channel of operation. If operation is occurring
outside of the allowable frequencies as listed above, the user must
cease operating the Wireless LAN at that location and consult the
local technical support staff responsible for the wireless network.
❖ The 5 GHz Turbo mode feature is not allowed for operation in any
European Community country.

5.375 x 8.375 ver 3.1

 17
❖ This device must not be operated in ad-hoc mode using channels in
the 5 GHz bands in the European Community. Ad-hoc mode
provides a direct communication between two client devices without a
Wireless LAN Access Point.
This device must be used with Access Points that have employed and
activated a radar detection feature required for European Community
operation in the 5 GHz bands. This device will operate under the control of
the Access Point in order to avoid operating on a channel occupied by any
radar system in the area. The presence of nearby radar operation may result
in temporary interruption of operation of this device. The Access Point’s
radar detection feature will automatically restart operation on a channel
free of radar. You may consult with the local technical support staff
responsible for the wireless network to ensure the Access Point device(s)
are properly configured for European Community operation.

Approved Countries/Regions for Use for the Atheros

AR5001X Mini PCI Wireless Network Adapter
This equipment is approved to the radio standard by the countries/regions
in the following table.

Do not use this equipment except in the countries/regions in the following

table.

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

802.11b (2.4 GHz)

Australia Austria Belgium
Canada Denmark Finland
France Germany Greece
Ireland Italy Liechtenstein
Luxembourg Netherlands New Zealand
Norway Portugal Sweden
Switzerland UK USA

802.11a (5 GHz)
Australia Austria Belgium
Canada Denmark Finland
France Germany Greece
Ireland Italy Liechtenstein
Luxembourg Netherlands New Zealand

5.375 x 8.375 ver 3.1

18
Norway Portugal Sweden
Switzerland UK USA

Turbo Mode (5 GHz)

Canada USA

Approved Countries/Regions for Use for the Intel®

PRO/Wireless LAN 2100 3B Mini PCI Adapter
This equipment is approved to the radio standard by the countries/regions
in the following table.

Do not use this equipment except in the countries/regions in the following

table.

Argentina Australia Austria

Belgium Brazil Canada
Chile Denmark Finland
France Germany Greece
Iceland Ireland Italy
Japan Liechtenstein Luxembourg
Mexico Netherlands New Zealand
Norway Peru Portugal
Singapore Spain Sweden
Switzerland UK Uruguay
USA Venezuela

Approved Countries/Regions for Use for the Toshiba

Mini PCI Wireless LAN Card
This equipment is approved to the radio standard by the countries/regions
in the following table.

Do not use this equipment except in the countries/regions in the following

table.

Australia Austria Belgium

Canada Denmark Finland
France Germany Greece
Hong Kong Iceland Ireland

5.375 x 8.375 ver 3.1

 19
Italy Japan Liechtenstein
Luxembourg Malaysia Netherlands
New Zealand Norway Philippines
Portugal Singapore Spain
Sweden Switzerland Thailand
UK USA

Approved Countries/Regions for use for the Foxconn

802.11b/g Wireless network adapter
This equipment is approved to the radio standard by the countries/regions in the
following table.

Do not use this equipment except in the countries/regions in the following

table.

802.11b/g (2.4 GHz)

EU Canada
USA Australia
Japan New Zealand

Bluetooth Wireless Technology Interoperability

Bluetooth™ Cards from TOSHIBA are designed to be interoperable with
any product with Bluetooth wireless technology that is based on Frequency
Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:
❖ Bluetooth Specification as defined and approved by The Bluetooth
Special Interest Group.
❖ Logo certification with Bluetooth wireless technology as defined by The
Bluetooth Special interest Group.

Bluetooth wireless technology is a new innovative technology, and

TOSHIBA has not confirmed compatibility of its Bluetooth™ products with
all PCs and/or equipment using Bluetooth wireless technology other than
TOSHIBA portable computers.
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless
networks over two or more (up to a total of seven) TOSHIBA portable com-
puters using these cards. Please contact TOSHIBA PC product support on
Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in
Europe or pcsupport.toshiba.com in the United States for more information.

5.375 x 8.375 ver 3.1

20
When you use Bluetooth™ cards from TOSHIBA close to 2.4 GHz Wireless
LAN devices, Bluetooth transmissions might slow down or cause errors. If
you detect certain interference while you use Bluetooth™ cards from
TOSHIBA, always change the frequency, move your PC to the area outside
of the interference range of 2.4 GHz Wireless LAN devices (40 meters/
43.74 yards or more) or stop transmitting from your PC. Please contact
TOSHIBA PC product support on Web site http://www.toshiba-europe.com/
computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the
United States for more information.
Bluetooth™ and Wireless LAN devices operate within the same radio frequency
range and may interfere with one another. If you use Bluetooth™ and Wireless LAN
devices simultaneously, you may occasionally experience a less than optimal
network performance or even lose your network connection. If you should
experience any such problem, immediately turn off either one of your Bluetooth™
or Wireless LAN. Please contact Toshiba PC product support on Web site http://
www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or
pcsupport.toshiba.com in the United States for more information.

Bluetooth Wireless Technology and Your Health

The products with Bluetooth wireless technology, like other radio devices,
emit radio frequency electromagnetic energy. The level of energy emitted
by devices with Bluetooth wireless technology however is far much less
than the electromagnetic energy emitted by wireless devices like for
example mobile phones.
Because products with Bluetooth wireless technology operate within the
guidelines found in radio frequency safety standards and recommendations,
TOSHIBA believes Bluetooth wireless technology is safe for use by
consumers. These standards and recommendations reflect the consensus of
the scientific community and result from deliberations of panels and
committees of scientists who continually review and interpret the extensive
research literature.
In some situations or environments, the use of Bluetooth wireless
technology may be restricted by the proprietor of the building or
responsible representatives of the organization. These situations may for
example include:
❖ Using the equipment with Bluetooth wireless technology on board
airplanes, or
❖ In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices
in a specific organization or environment (e.g. airports), you are
encouraged to ask for authorization to use the device with Bluetooth
wireless technology prior to turning on the equipment.

5.375 x 8.375 ver 3.1

 21

Regulatory Statements
This product complies with any mandatory product specification in any
country/region where the product is sold. In addition, the product complies
with the following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has
been provided with the CE mark accordingly.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.”
L’utilisation de ce dispositif est autorisée seulement aux conditions
suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du
dispositif doit étre prét à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement
du dispositif.
The term “IC” before the equipment certification number only signifies that
the Industry Canada technical specifications were met.

Caution: FCC Interference Statement

This device complies with part15 of the FCC rules. Operation is subject to
the following two conditions:
❖ This device may not cause harmful interference, and
❖ This device must accept any interference received, including
interference that may cause undesired operation.
Note that any changes or modifications to this equipment not expressly
approved by the manufacturer may void the authorization to operate this
equipment.

Caution: Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth™ Card from TOSHIBA is far
below the FCC radio frequency exposure limits. Nevertheless, the
Bluetooth™ Card from TOSHIBA shall be used in such a manner that the
potential for human contact during normal operation is minimized.
In order to comply with FCC radio-frequency radiation exposure
guidelines for an uncontrolled environment, the Bluetooth™ Card from

5.375 x 8.375 ver 3.1

22
TOSHIBA has to be operated while maintaining a minimum body to
antenna distance of 20 cm.
Refer to the Regulatory Statements as identified in the documentation that
comes with those products for additional information.
The Bluetooth™ Card from TOSHIBA is far below the FCC radio
frequency exposure limits.
Nevertheless, it is advised to use the Bluetooth™ Card from TOSHIBA in
such a manner that human contact during normal operation is minimized.

Changes or modifications made to this equipment not expressly approved by

TOSHIBA or parties authorized by TOSHIBA could void the user’s authority
to operate the equipment.

Taiwan
Article 14 Unless approved, for any model accredited low power radio frequency
electric machinery, any company, trader or user shall not change the fre-
quency, increase the power or change the features and functions of the
original design.
Article 17 Any use of low power radio frequency electric machinery shall not affect
aviation safety and interfere with legal communications. In the event
interference is caused, the use of such electric machinery shall be imme-
diately discontinued. Operation of such products can be resumed only
when they are modified and can no longer cause interference.

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and
regulations.
Low power radio frequency electric machinery shall resist against
interference from legal communications or from industrial, scientific and
medical radio emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for
second generation low-power data communication systems such as this
equipment overlaps that of mobile object identification systems (premises
radio station and specified low-power radio station).

5.375 x 8.375 ver 3.1

 23
1. Sticker
Please put the following sticker on devices incorporating this product.

2. Indication
The indication shown below appears on this equipment.
(1) (2) (3)

2.4FH1

(4)

1 2.4: This equipment uses a frequency of 2.4 GHz.

2 FH: This equipment uses FH-SS modulation.
3 The interference range of this equipment is less than 10m.
4 This equipment uses a frequency bandwidth from 2,400 MHz to
2,483.5 MHz. It is impossible to avoid the band of mobile object
identification systems.
3. TOSHIBA Direct PC
Monday – Friday: 10:00 – 17:00
Toll Free Tel: 0120-13-1100
Direct Dial: 03-3457-5916
Fax: 03-5444-9450

Device Authorization
This device obtains the Technical Regulation Conformity Certification, and
it belongs to the device class of radio equipment of low-power data
communication system radio station stipulated in the Radio Law of Japan.
The Name of the radio equipment: EYXF2CS
TELECOM ENGINEERING CENTER
Approval Number: 01NYDA1305
The following restrictions apply:
❖ Do not disassemble or modify the device.
❖ Do not install the embedded wireless module into other device.

5.375 x 8.375 ver 3.1

24

DVD-ROM and multi-function drive safety

instructions
The DVD-ROM and multi-function drives employ a laser system. To ensure
proper use of this product, please read this instruction manual carefully and
retain for future reference.
Never attempt to disassemble, adjust or repair a CD/DVD drive, CD-RW drive,
Multi-drive or any other optical drive. You could damage the drive. You would also
be exposed to laser light or other safety hazards, resulting in serious injury. Always
contact an authorized Toshiba service provider, if any repair or adjustment is
required.

Location of the required label

(Sample shown below. Location of the label and manufacturing
information may vary.)

This appliance contains a laser system and is classified as a CLASS 1

LASER PRODUCT. To use this model properly, read the user’s guide
carefully and keep it for your future reference.
Never attempt to disassemble, adjust or repair a CD/DVD drive, CD-RW drive,
Multi-drive or any other optical drive. You could damage the drive. You would also
be exposed to laser light or other safety hazards, resulting in serious injury. Always
contact an authorized Toshiba service provider, if any repair or adjustment is
required.

Copyright
This guide is copyrighted by Toshiba America Information Systems, Inc.
with all rights reserved. Under the copyright laws, this guide cannot be
reproduced in any form without the prior written permission of Toshiba. No
patent liability is assumed, however, with respect to the use of the
information contained herein.
©2005 by Toshiba America Information Systems, Inc. All rights reserved.

5.375 x 8.375 ver 3.1

 25

Export Administration Regulation

This document contains technical data that may be controlled under the
U.S. Export Administration Regulations, and may be subject to the
approval of the U.S. Department of Commerce prior to export. Any export,
directly or indirectly, in contravention of the U.S. Export Administration
Regulations is prohibited.

Notice
The information contained in this manual, including but not limited to any
product specifications, is subject to change without notice.
TOSHIBA CORPORATION AND TOSHIBA AMERICA
INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO
WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER
INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO
ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY
FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY
FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR
OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES
BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT
SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,
WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR
ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE
THEREOF.

Trademarks
Satellite and Noteworthy are registered trademarks of Toshiba America
Information Systems, Inc. and/or Toshiba Corporation.
Microsoft, Direct3D, DirectSound, DirectMusic and Windows are
registered trademarks of Microsoft Corporation in the United States and/or
other countries.
Dolby - Manufactured by Toshiba under license from Dolby Laboratories/
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Secure Digital and SD are trademarks.
i.LINK is a registered trademark of the Sony Corporation.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
TouchPad is a trademark of trademarks of Synaptics, Inc.

5.375 x 8.375 ver 3.1

26
Sound Blaster is a registered trademark of Creative Labs, Inc.
Intel and Pentium are registered trademarks of the Intel Corporation.
All other brand and product names are trademarks or registered trademarks
of their respective companies.
Computer Disposal Information
This product contains mercury. Disposal of this material may be regulated
due to environmental considerations. For disposal, reuse or recycling
information, please contact your local government or the Electronic
Industries Alliance at www.eiae.org.

5.375 x 8.375 ver 3.1

 Introduction
27

Introduction
Welcome to the world of powerful and portable multimedia
computers! With your new Toshiba notebook computer, your
access to information can accompany you wherever you go.
You will find that the Microsoft® Windows® XP operating
system is already installed on your computer. It offers
exciting features and easy Internet access.
This guide
This guide offers important information about your computer,
including solutions to the most common problems, and
features and specifications.
For more detailed information, descriptions of other features
and more extensive troubleshooting guidelines, see the
electronic user’s guide preinstalled on your system. It is also
available on the Web at pcsupport.toshiba.com.
Safety icons
This guide contains safety instructions that must be observed
in order to avoid potential hazards that could result in
personal injuries, damage to your equipment, or loss of data.
These safety cautions have been classified according to the
seriousness of the risk, and the icons highlight these
instructions as follows:

Indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may

result in property damage.

Provides important information.

5.375 x 8.375 ver 3.1

28 Setting up your computer and getting started

Other icons used

Additional icons highlight other helpful or educational
information:

TECHNICAL NOTE: This icon highlights technical information about

the computer.

HINT: This icon denotes helpful hints and tips.

DEFINITION: This icon indicates the definition of a term used in the

text.

Other documentation
Your computer comes with the following documentation in
addition to this resource guide:
❖ An electronic version of the user’s guide.
❖ It may also contain guides for other programs that may
come with your system.
For accessory information, visit Toshiba's Web site at
accessories.toshiba.com.

Setting up your computer and getting started

Strain and stress injuries are becoming more common as
people spend more time using their computers. With a little
care and proper use of the equipment, you can work
comfortably throughout the day.

Using the computer keyboard incorrectly can result in discomfort

and possible injury. If your hands, wrists, and/or arms bother you
while typing, stop using the computer and rest. If the discomfort
persists, consult a physician.

For more information, consult books on ergonomics,

repetitive-strain injury, and repetitive-stress syndrome.
Placement of the computer
Proper placement of the computer and external devices is
important to avoid stress-related injuries. Consider the
following when placing your computer.

5.375 x 8.375 ver 3.1

 Setting up your computer and getting started
29
❖ Place the computer on a flat surface at a comfortable
height and distance. You should be able to type without
twisting your torso or neck, and look at the screen
without slouching.
❖ If you are using an external monitor, the top of the
display should be no higher than eye level.
❖ If you use a paper holder, set it at about the same height
and distance as the screen.
Seating and posture
When using your computer, maintain good posture with your
body relaxed and your weight distributed evenly. Proper
seating is a primary factor in reducing work strain.
Other precautions
Your notebook computer is designed to provide optimum
safety and ease of use, and to withstand the rigors of travel.
You should observe certain precautions to further reduce the
risk of personal injury or damage to the computer.

Never allow any liquids to spill into any part of your PC, and never
expose the PC to rain, water, seawater or moisture. Exposure to
liquid or moisture can cause electric shock or fire, resulting in
damage or serious injury. If any of these eventualities should
accidentally occur, immediately:
1. Turn off the PC.
2. Disconnect the AC adapter from the power plug socket and PC.
3. Remove the battery pack.
Failure to follow these instructions could result in serious injury or
permanent damage to the PC.
Do not turn on the power again, until you have taken the PC to an
authorized service center.

Never apply heavy pressure to the computer or subject it to sharp

impacts. Excessive pressure or impact can damage computer
components or otherwise cause your computer to malfunction.

5.375 x 8.375 ver 3.1

30 Setting up your computer and getting started

Some PC Cards become hot with prolonged use. Overheating of a

PC Card can result in errors or instability in its operation.
Be careful when you remove a PC Card that has been used for
lengthy periods of time.

Your computer’s features and specifications

Certain notebook chassis are designed to accommodate all
possible configurations for an entire product Series. Your
selected model may not have all the features and
specifications corresponding to all of the icons or switches
shown on the notebook chassis, unless you have selected all
those features.
This information applies to all the features and icons
described in this guide.
Below are examples of one of the many possible icons that
may come with your computer:

Sample system icons

Connecting the AC adapter
The AC adapter enables you to power the computer from an
AC outlet and to charge the computer’s batteries. The AC
power light on the computer glows when the device is
plugged in.

Hold the power cord/cable by its plug when you connect/disconnect

it. Do NOT pull the cord/cable itself. Doing so may damage the
power cord/cable and result in a short circuit or electric shock.

When you connect the AC adapter to the computer, always follow the
steps in the exact order as described in the user's manual.
Connecting the power cord/cable to a live electrical outlet should be
the last step otherwise the adapter DC output plug could hold an
electrical charge and cause an electrical shock or minor bodily injury
when touched. As a general safety precaution, avoid touching any
metal parts.

5.375 x 8.375 ver 3.1

 Setting up your computer and getting started
31

Use only the AC adapter supplied with your computer or an

equivalent adapter that is compatible. Use of any incompatible
adapter could damage your computer. Toshiba assumes no liability
for any damage caused by use of an incompatible adapter.

AC adapter cord
AC adapter

Power cord/cable

Sample power cord/cable and AC adapter

To connect AC power to the computer:
1 Connect the power cord/cable to the AC adapter.

Sample connecting the power cord/cable to the AC adapter

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.

2 Plug the AC adapter cord into the DC-IN on the back of

the computer.

5.375 x 8.375 ver 3.1

32 Setting up your computer and getting started

Sample connecting the AC adapter cord to the computer

3 Connect the power cord/cable to a live electrical outlet.
The AC power and battery lights glow.

Damaged power cords/cables can cause fire or electric shock. Never

modify, forcibly bend, place heavy objects on top of, or apply heat to
the power cord/cable.
If the power cord/cable becomes damaged or the plug overheats,
discontinue use. There is a risk of electric shock.
Never remove the power plug from the outlet with wet hands. Doing
so may cause an electric shock.

Connecting a printer
You can connect a USB-compatible printer to your computer
through one of the USB ports. To confirm a printer’s
compatibility, check its documentation.
To achieve the connection, you need a suitable USB cable,
which may come with your printer. Otherwise, you can
purchase one from a computer or electronics store.

Follow the manufacturer’s instructions for connecting a USB printer

to your computer.

Installing additional memory (optional)

Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Standby or Hibernation mode, data will be
lost.

HINT: To purchase additional memory modules, see your

accessories information or visit accessories.toshiba.com.

5.375 x 8.375 ver 3.1

 Setting up your computer and getting started
33
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
Additional memory comes in various capacities (visit the
Toshiba Web site at accessories.toshiba.com for more
information). Your system has one user upgradeable memory
slot.

If you use the computer for a long time, the memory module will
become hot. If this happens, let the module cool to room temperature
before you replace it.

Do not try to install a memory module under the following

conditions. You can damage the computer and the memory module.
1. The computer is turned on.
2. The computer was shut down using Standby mode.
3. Power to the DVD-ROM or multi-function drive has been turned
on.

You need a standard Phillips no. 1 screwdriver to install a

memory module.

Do not install or remove a memory module while the DVD-ROM

drive power is on.

To avoid damaging the computer’s screws, use a standard Phillips

no. 1 screwdriver that is in good condition.

If you are adding memory after you have started to use the
computer, begin at step 1, otherwise skip to step 2.
1 Turn off the computer via the Start menu.
The operating system turns off the computer.
2 Unplug and remove any cables connected to the
computer, including the adapter cord/cable.
3 Close the display panel and turn the computer upside
down to locate the memory module slot cover.

5.375 x 8.375 ver 3.1

34 Setting up your computer and getting started

Memory module
slot cover

Sample locating the memory module slot cover

4 Remove the battery (see “Changing the main battery” on
page 47).
5 Using a standard Phillips no. 1 screwdriver, unscrew the
screw that secures the memory module slot cover, then
remove the memory module slot cover.
6 Place the memory module slot cover in a safe place so
that you can retrieve it later.
7 Remove the new memory module from its antistatic
packaging.

Sample removing the memory module cover

Static electricity can damage the memory module. Before you handle
the memory module, touch a grounded metal surface to discharge
any static electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
gold connector bar (on the side you insert into the computer).

8 Insert the memory module into the slot and gently press it
down until it snaps into place. The clips on either side of

5.375 x 8.375 ver 3.1

 Setting up your computer and getting started
35
the memory module will click to secure the memory
module.

Avoid touching the connectors on the memory module or on the

computer. Grease or dust on the connectors may cause memory
access problems.

Do not force the memory module into position. The

memory module should be level when secured in place.

Sample inserting the memory module into the slot

9 Replace the memory module cover and tighten the screw.
10 Turn the computer over and reconnect any cables you
removed.
11 Restart the computer.
When you turn on the computer, it automatically
recognizes the additional memory.
Removing a memory module
If you use the computer for a long time, the memory modules will
become hot. If this happens, let the modules cool to room
temperature before you replace them.

Do not try to remove a memory module with the computer turned on.
You can damage the computer and the device.
Do not remove the memory module while the computer is in Stand
By mode. The computer could hang up the next time you turn it on
and data in memory will be lost. In either of the above cases, the
Stand By configuration will not be saved.
The following message appears when you turn on the power:
Warning: Resume Failure

5.375 x 8.375 ver 3.1

36 Your computer’s TFT display

Press Any Key To Continue

If the computer hangs up when you turn it on, perform the following:
Press the power button and hold it down for at least ten seconds,
then turn the power on again.

1 Follow steps 1 through 7 in “Installing additional

memory (optional)” on page 32.
2 Pull the clips away from the memory module.
The memory module pops partially out of the slot.
3 Carefully remove the memory module from the slot.
4 Replace the memory module slot cover and tighten the
screw.
5 Turn the computer over and restart it.

TECHNICAL NOTE: You must have at least one memory

module installed for the computer to work.

Your computer’s TFT display

Small bright dots may appear on your TFT display when you
turn on your computer. Your display contains an extremely
large number of thin-film transistors (TFT) and is
manufactured using high-precision technology. Any small
bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.

Over a period of time, and depending on the usage of the computer,

the brightness of the LCD Screen will deteriorate. This is an intrinsic
characteristic of LCD technology.
Screen will dim when the computer is operated on battery power and
you may not be able to increase the brightness of the screen.

5.375 x 8.375 ver 3.1

 Inserting a PC Card
37

Inserting a PC Card
Use caution when lifting or turning your computer. Failure to do so
may result in damage to components, such as cables, attached to
your computer, or to the computer itself.

Sample inserting a PC Card

1 If your PC Card does not support hot swapping, save
your data and turn off the computer before inserting the
PC Card. For more information, see “Hot swapping” on
page 38.
2 Hold the PC Card with the arrow or main label side up
and the connector side toward the PC Card slot.
3 When the card is almost all the way into the slot, push
firmly, but gently, to ensure a firm connection with the
computer. Do not force the card into position.
Removing a PC Card
1 Click the Safely Remove Hardware icon on the system
tray.
2 Click Safely remove xxxx, where xxxx is the identifier
for your PC Card.
3 The operating system advises you that you may safely
remove the card.

5.375 x 8.375 ver 3.1

38 Learning the basics

Sample removing a PC Card

4 Press the PC Card eject button next to the PC Card slot.
5 Remove the PC Card and store it properly.
Hot swapping
One of the great things about PC Cards is that you can
replace one PC Card with another while the computer is on.
This is called “hot swapping.”
Hot swapping precautions
Although you can insert a PC Card at any time, to avoid data
loss never remove a card while it is in use. For example:
❖ Never remove a hard disk card while the system is
accessing it.
❖ Never remove a network card while you are connected to
a network.
Before removing a PC Card, stop it by clicking the Safely
Remove Hardware icon on the system tray. Once the PC
Card has stopped, you can safely remove it.
Learning the basics
Computing tips
❖ Save your work frequently.
Your work stays in the computer’s temporary memory
until you save it to the disk. You will lose all unsaved
work, if, for example, a system error occurs and you must
restart your computer, or your battery runs out of charge
while you are working. Your computer can be configured
to warn you when the battery is running low.

5.375 x 8.375 ver 3.1

 Learning the basics
39

HINT: Some programs have an automatic save feature that you can
turn on. This feature saves your file to the hard disk at preset
intervals. See your software documentation for details.

❖ Back up your files to diskettes (or other removable

storage media) on a regular basis. Label the backup
copies clearly and store them in a safe place.
❖ Scan all new files for viruses.
❖ Never turn off the computer if a drive indicator light
indicates a drive is active.

The Windows® XP operating system records information, such as

your desktop setup, during its shutdown procedure. If you do not let
the operating system shut down normally, details such as new icon
positions may be lost.

Using the TouchPad™

The TouchPad, the small, smooth square cutout located in
front of the keyboard, is sensitive to touch and enables you to
move the cursor with the stroke of a finger. Simply move
your finger on the TouchPad in the direction you’d like to
move the cursor:
❖ To move the cursor to the top of the page, push your
finger forward on the TouchPad.
❖ To move the cursor to the bottom of the page, drag your
finger toward yourself.
❖ To move the cursor to the right side of the page, slide
your finger across the TouchPad from left to right.
❖ To move it to the left side, slide your finger from right to
left.

Because the TouchPad is much smaller than the display screen,

moving your cursor across the screen often means having to move
your finger several times across the TouchPad in the preferred
direction.

5.375 x 8.375 ver 3.1

40 Using the DVD-ROM or multi-function drive

Using primary and secondary control buttons

When you want to click or choose an item, use the TouchPad
to move the pointer/cursor to the item. Once the pointer/
cursor is positioned, you can click it into place by either
double-tapping the TouchPad or clicking the control buttons.
The control buttons are adjacent to the TouchPad and are used
like the buttons on a mouse. The primary control button is the
left one and corresponds to the left mouse button. To double-
click, press the primary button twice in rapid succession.
The function of the secondary button depends on the program
you are using. It usually corresponds to the right mouse
button. Check your program’s documentation to find whether
it uses the secondary mouse button.
Using the DVD-ROM or multi-function drive
Optical storage has become the preferred medium for software,
music, and video. Digital versatile discs (DVDs) provide a
significant increase in data storage and support features that are
not available on any other video platform. These features include
wide-screen movies, multiple language tracks, digital surround
sound, multiple camera angles, and interactive menus.
For these reasons, your computer may come with a DVD-ROM
drive or multi-function drive.

TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to

play region 1 (North America) DVD-ROMs. If you play a DVD disc
from another region, the drive will automatically change to play in
the format of the other region. The drive will allow you to change
regions four times. On the fourth change, the region will be “locked
in.” That is, the drive will only play DVDs from that last region. Note
that changing from region 1 to region 2 and back to region 1 is
counted as two changes.

For optimum DVD performance, it is recommended that you play

DVDs while running the computer on AC power.

5.375 x 8.375 ver 3.1

 Using the DVD-ROM or multi-function drive
41
You use CD-ROMs to load and run software, and to access
reference material such as catalogs, as well as listen to music.

Eject button
Manual eject hole
Sample DVD-ROM or multi-function drive
Drive-in-use indicator light—Indicates when the drive is in
use.
Eject button—Press to release the disc tray.

Never press the eject button or turn off the computer while the drive-
in-use indicator light is glowing. Doing so could damage the disc or
the drive.

Manual eject hole—Use if you need to release the disc tray

when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.

Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it. Instead, use a slim
object such as a straightened paper clip.

CD/DVD control buttons

The control buttons to the left side of the keyboard let you
play audio CDs when the computer is off. You can also use
them to play CDs and DVDs when the computer is on.
Music light
Music CD button
Play/pause button
Stop/eject button
Next track button
Previous track button

Sample CD/DVD control buttons

5.375 x 8.375 ver 3.1

42 Using the DVD-ROM or multi-function drive

The Music CD button activates the Media Player on your

computer, and allows you to play music CDs when the
computer is turned off.
If you wish to play a music CD while the computer is off:
1 Press the Music CD button.
2 When the Music light turns on, you may then insert a
music CD into the DVD-ROM or multi-function drive.
If a CD is already in the drive, you may begin to play it
using the play/pause button.
3 Use the CD/DVD control buttons to control the CD as
with any typical CD player.
The play/pause button starts playing the disc or makes it
pause if currently playing.
The stop/eject button stops a disc that is currently playing.
You can eject a disc by pressing the stop/eject button twice.
Use this method to eject a disc when the computer is turned
off and the sound subsystem is turned on.
The next track button skips to the following track on the
disc.
The previous track button returns to the preceding track on
the disc.

If you have set a password for logging onto your system, your
computer will start up and you will need to log on before being able
to play a CD or DVD.

Inserting a disc
Before playing an audio CD or a DVD, turn down the volume. Playing
the disc at maximum volume could damage your ears. To turn down
the volume, use the volume control dial or access the Volume
Control program (click Start, All Programs, Accessories,
Entertainment, Volume Control).

To insert a compact disc into the drive:

1 Make sure the computer is turned on.
2 Make sure the in-use indicator light is off.

5.375 x 8.375 ver 3.1

 Using the DVD-ROM or multi-function drive
43
3 Press the drive’s eject button.
The disc tray slides partially out of the drive (about
1 inch).

HINT: The drive will not open if the computer’s power is off.

4 Grasp the tray and pull it fully open.

5 Hold the disc by its edges and check that it is clean and
free of dust.
If the disc is dusty, clean it.

Handle discs carefully. Avoid touching the surface of the disc. Grasp
it by its center hole and edge. If you handle the disc incorrectly, you
could lose data.

6 Gently place the disc in the disc tray, label side up.

Sample positioning the disc in the drive

7 Gently press the disc onto the center spindle until you
feel the disc click into place.

Be careful not to touch the drive’s lens (located underneath the

drive’s spindle) or the area around it. Doing so could cause the drive
to malfunction.

8 Make sure the disc is completely on the spindle and is

lying flat on the tray.

Make sure the disc is properly positioned on the spindle. If you

position the disc incorrectly, it can jam the disc tray.

5.375 x 8.375 ver 3.1

44 Using the DVD-ROM or multi-function drive

9 Push the disc tray in by pressing gently on the center of

the tray until it clicks into place.
You are ready to use the disc.
Removing a disc with the computer on
Never press the eject button while the computer is accessing the
drive. Wait for the disk/disc activity light on the system indicator
panel to turn off before opening the disc tray.

1 Locate and press the eject button.

The disc tray partially opens.
2 Grasp the sides of the disc tray and pull it fully open.
3 Remove the disc from the disc tray and place it in its
protective cover.

If the disc is spinning when you open the disc tray, wait for the disc
to stop before removing it.

4 Close the disc tray by pressing gently on the center of the

tray until it clicks, indicating that it is locked.
Removing a disc with the computer off
1 Insert a slender object, such as a straightened paper clip,
into the manual eject hole.

Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.

2 Pull the tray fully open, remove the disc and place it in its
protective cover.
3 Close the disc tray by pressing gently on the center of the
tray until it clicks, indicating that it is locked.

5.375 x 8.375 ver 3.1

 Moving the computer
45

Moving the computer

Before moving your computer, even across the room, make
sure all disk activity has ended (the drive indicator light stops
glowing) and all external peripheral cables are disconnected.

Never pick up the computer by its display panel or by the back

(where the ports are located).

Mobile computing
Running the computer on battery power
Battery life may vary, depending on applications, power
management settings, and features utilized. Recharge time
varies depending on usage. The battery may not charge while
the computer is consuming full power.
After a period of time, the battery will lose its ability to
perform at maximum capacity and will need to be replaced.
This is normal for all batteries. To purchase a new battery
pack, see your accessories information, or to stay current on
the most recent software and hardware options for your
computer, and for other product information, regularly check
the Toshiba Web site at accessories.toshiba.com.
To ensure that the battery maintains its maximum capacity,
operate the computer on battery power at least once a month
until the battery is fully discharged. Refer to “Maximizing
battery life” on page 50 in this document for procedures. If
the computer is continuously operated on AC power, either
through an AC adapter or a docking station (if applicable to
your system), for an extended period (more than a month) the
battery may fail to retain a charge. This may shorten the life
of the battery, an d the battery light may not indicate a low-
battery condition.
The RTC battery powers the System Time Clock and BIOS
memory used to store your computer’s configuration settings.
When fully charged, it maintains this information for up to a
month when the computer is powered off.

5.375 x 8.375 ver 3.1

46 Mobile computing

The RTC battery may have become completely discharged

while your computer was shipped, resulting in the following
message during startup:
BAD RTC BATTERY
BADCHECKSUM (CMOS)
CHECK THE SYSTEM

The above error message may vary by computer model.

The RTC battery does not charge while the computer is turned off
even when the AC adapter is charging the computer.
The RTC battery charges when the computer is powered on.

Monitoring battery power

The computer’s main battery light gives you an indication of
the main battery’s current charge:
❖ Green indicates the AC adapter has fully charged the
battery.
❖ Amber indicates the AC adapter is charging the battery.
❖ Off (no illumination) indicates one of the following
conditions: the battery is dead, the battery is not
charging, the battery is not fully charged, or the AC
adapter is not plugged in to the computer or AC outlet.

Battery life and charge time may vary, depending upon power
management settings, applications and features used.

TECHNICAL NOTE: The computer drains the battery faster at low

temperatures. Check your remaining charge frequently if you are
working in temperatures below 50 degrees Fahrenheit.
The computer calculates the remaining battery charge based on your
current rate of power use and other factors such as the age of the
battery.

5.375 x 8.375 ver 3.1

 Mobile computing
47

TECHNICAL NOTE: When your computer is using all of the power

provided by the AC Adapter to run applications, features, and
devices, the recharging of the battery cannot occur. Your computer's
Power Saver utility can be used to select a power level setting that
reduces the power required for system operation and will allow the
battery to recharge.

❖ A flashing amber battery light indicates that the computer

is using battery power, and the battery’s charge is running
low.

HINT: Be careful not to confuse the battery light ( ) with the on/off
light ( ). When the on/off light flashes amber, it indicates that the
system is suspended (using Windows® XP Standby command).

Setting battery alarms

Your computer can be configured to warn you when the
battery is running low. For more information, see “Setting
battery alarms” in the electronic user’s guide.
Changing the main battery
When your battery power is running low, you have two
options—connecting the computer to an AC power source or
installing a charged battery.

When handling a battery, be careful not to drop it or short-circuit its

terminals. Also, do not drop, hit or otherwise impact the battery. Do
not scratch or break the casing and do not twist or bend the battery.
Do not remove the battery while the computer is in Standby mode.
Data in memory will be lost.

If your battery discharges fully, your information will be lost. Be sure

to save your work often.

Removing the battery from the computer

1 Save your work.
2 Turn off the computer or place it in Hibernation mode
according to the instructions in “Using Hibernation” in
the electronic user’s guide.
3 Remove all cables connected to the computer.

5.375 x 8.375 ver 3.1

48 Mobile computing

4 Close the display panel and turn the computer upside

down with the front of the computer facing you.
5 If the battery lock is in the locked position, slide it toward
the unlocked position.
6 Push and hold the battery release latch.

Sample releasing the battery

7 While holding the battery release latch in the open
position, gently lift the battery pack out of the computer.

Sample removing the battery

If the battery is leaking or its case is cracked, put on protective

gloves to handle it, and discard it immediately following the advice
in “Disposing of used batteries safely” on page 51.

Inserting the battery in the computer

Assuming you just removed the battery pack (see “Removing
the battery from the computer” on page 47).
1 Wipe the terminals of the charged battery with a clean
cloth to ensure a good connection.
2 Place the battery pack in the battery compartment.

5.375 x 8.375 ver 3.1

 Mobile computing
49
3 Ensure the battery release latch clicks into place.
The battery release locks automatically clicks into the
locked position.
4 Turn the computer right side up.
5 Reconnect the cables and turn on the computer.
The battery pack has been designed so that you cannot install
it with reverse polarity.
Battery safety precautions
❖ If the battery pack produces an odor, overheats, or
changes color or shape while it is being used or charged,
turn off the computer’s power immediately and
disconnect the power cord from the power socket.
Carefully remove the battery pack from the computer.
❖ Do not try to disassemble a battery pack.
❖ Do not overcharge or reverse charge a battery.
Overcharging will shorten its life, and reverse charging
could damage it.
❖ Avoid touching the metal terminals of the battery with
another metal object. Short-circuiting the battery can
cause it to overheat and may cause damage to the battery
or the computer.
❖ Do not incinerate a spent battery, as this can cause it to
explode and release toxic materials.
❖ If a battery is leaking or damaged, replace it immediately.
Use protective gloves when handling a damaged battery.
❖ To replace the main battery, use an identical battery that
you can purchase through accessories.toshiba.com
❖ Reverse polarity should be avoided with all batteries. The
main battery is designed so that it cannot be installed in
reverse polarity.
❖ Charge the battery pack only in the computer or in a
battery charger designated as an approved option.

5.375 x 8.375 ver 3.1

50 Mobile computing

❖ When you install the battery pack, you should hear a

click when it is seated properly.
❖ Do not expose the battery pack to fire. The battery pack
could explode.
Maximizing battery life
To maximize the life of your battery pack:
❖ At least once a month, disconnect the computer from a
power source and operate it on battery power until the
battery pack fully discharges. Before doing so, follow the
steps below:
1 Turn off the computer’s power.
2 Disconnect the AC adapter and turn on the
computer’s power. If it does not turn on, go to step 4.
3 Operate the computer on battery power for five
minutes. If the battery pack has at least five minutes
of operating time, continue operating until the battery
pack is fully discharged. If the battery light flashes or
there is some other warning to indicate a low battery,
go to step 4.
4 Connect the AC adapter to the computer and connect
the power cord to a power outlet. The DC-IN or AC
power-light should glow green, and the battery light
should glow amber to indicate that the battery pack is
being charged. If the DC-IN or AC power-light
indicator does not glow, power is not being supplied.
Check the connections for the AC adapter and power
cord.
5 Charge the battery pack until the battery light glows
green.
❖ If you have extra battery packs, rotate their use.
❖ If you will not be using the system for an extended
period, more than one month, remove the battery pack.
❖ Disconnect the AC adapter when the battery is fully
charged. Overcharging makes the battery hot and
shortens life.

5.375 x 8.375 ver 3.1

 Disposing of used batteries safely
51
❖ If you are not going to use the computer for more than
eight hours, disconnect the AC adapter.
❖ Store spare battery packs in a cool dry place out of direct
sunlight.
Disposing of used batteries safely
The life of a battery pack should last for years. When the
battery pack needs replacing, the main battery light flashes
amber shortly after you have fully recharged the battery.
You must discard a battery if it becomes damaged.

The computer’s main battery is a Lithium-Ion (Li-Ion) battery, which

can explode if not properly replaced, used, handled, or disposed.
Putting spent batteries in the trash is not only irresponsible, it may
be illegal. Dispose of the battery as required by local ordinances or
regulations.
Use only batteries recommended by Toshiba.

After repeated use, the batteries will finally lose their ability
to hold a charge and you will need to replace them. Under
federal, state and local laws, it may be illegal to dispose of
old batteries by placing them in the trash.
Please be kind to our shared environment. Check with your
local government authority for details regarding where to
recycle old batteries or how to dispose of them properly. If
you cannot find the information you need elsewhere, call
Toshiba at: (800) 457-7777.
If something goes wrong
Problems that are easy to fix
Your program stops responding.
If you are working with a program that suddenly freezes all
operations, chances are the program has stopped responding.
You may be able to exit the failed program without shutting
down the operating system or closing other programs.
To close a program that has stopped responding:
1 Press Ctrl, Alt, and Del simultaneously (once).
2 Click the Applications tab.

5.375 x 8.375 ver 3.1

52 If something goes wrong

If a program has stopped responding, the words “not

responding” appear beside its name in the list.
3 Select the program you want to close, then click End
Task.
Closing the failed program should allow you to continue
working. If it does not, continue with step 4.
4 Close the remaining programs one by one by selecting
the program name, then End Task.
5 Turn off your computer according to the instructions in
“Turn off or Shut down command” in the electronic
user’s guide.
Your program performs an illegal operation.
If you receive the message, “Your program has performed an illegal
you should record the details of the message and
operation,”
consult the software manufacturer.
To record the details, click the Details button and copy the
text the operating system displays. The Details button
displays information that the software manufacturer needs to
help you solve your problem.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cord/cable
properly or installed a charged battery.
Press and hold down the power button for at least 10 seconds.
If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.
Verify that the computer is on by looking at the on/off
indicator. If the indicator is glowing, the computer is on.
If you are using an AC adapter, verify that the computer is
receiving power from the external power source by looking at
the AC power light. If the indicator is glowing, the computer
is connected to a live external power source.

5.375 x 8.375 ver 3.1

 If something goes wrong
53
The computer starts but, when you press a key, nothing
happens.
Verify that the active program accepts text input. Try clicking
your mouse on an area where you can type text, and try
typing again.
Your computer may be in Stand By mode and have a software
or resource conflict. When this happens, turning the power on
returns you to the problem instead of restarting the system.
To clear the condition, press Ctrl, Alt, and Del simultaneously.
Clearing the condition may get the computer running, but it
will not solve a resource conflict. Read both the
documentation that came with the conflicting device and
“Resolving a hardware conflict” in the electronic user’s
guide.
The keyboard produces unexpected characters.
A keypad overlay may be on. If the numeric keypad or cursor
control light is on, press Fn and F10 simultaneously to turn off
the cursor control light or press Fn and F11 simultaneously to
turn off the numeric keypad light.
If the problem occurs when both the keypad overlays are off,
make sure the software you are using is not remapping the
keyboard. Refer to the software’s documentation and check
that the program does not assign different meanings to any of
the keys.
Display problems
The display is blank.
Display Auto Off may be in effect. Press any key to activate
the screen.
You may have activated the instant password feature by
pressing Fn and F1 simultaneously.
If you have registered a password, press the Enter key, type the
password and press Enter. If no password is registered, press
Enter. The screen reactivates and allows you to continue
working.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, hold

5.375 x 8.375 ver 3.1

54 If something goes wrong

down Fn and continue to press F5 until the display priority is

not the external monitor.
Small bright dots appear on your TFT display when you
turn on your computer.
Your display contains an extremely large number of thin-film
transistors (TFT) and is manufactured using high-precision
technology. The small bright dots that appear on your display
are an intrinsic characteristic of the TFT manufacturing
technology.

Over a period of time, and depending on the usage of the computer,

the brightness of the LCD Screen will deteriorate. This is an intrinsic
characteristic of LCD technology.
Screen will dim when the computer is operated on battery power and
you may not be able to increase the brightness of the screen.

PC Card problems
PC Card checklist
❖ Make sure the card is inserted properly into the slot.
See “Using PC Cards” in the electronic user’s guide.
❖ Make sure all cables are securely connected.
❖ Occasionally a defective PC Card slips through quality
control. If another PCMCIA-equipped computer is
available, try the card in that machine. If the card
malfunctions again, it may be defective.
Here are some common problems and their solutions:
Resolving PC Card problems
The slot appears dead and cards that worked no longer
do.
Check the PC Card status:
1 Click Start.
2 Click My Computer icon with the secondary button,
then click Properties.
The System Properties window appears.
3 Click the Hardware tab.

5.375 x 8.375 ver 3.1

 If you need further assistance
55
4 Click the Device Manager button.
5 Double-click the appropriate category for the PC Card
being used.
6 Double-click the name of the PC Card device.
The operating system displays your PC Card’s Properties
window, which contains information about your PC Card
configuration and status.
The computer stops working (hangs) when you insert a
PC Card.
Remove the PC Card. If removing the PC Card does not
resolve the problem, try restarting the computer. If the
computer still does not work, contact the PC Card’s
manufacturer.
If you need further assistance
If you have followed the recommendations in this chapter and
are still having problems, you may need additional technical
assistance. This section contains the steps to take to ask for
help.
Before you call
Since some problems may be related to the operating system
or the program you are using, it is important to investigate
other sources of assistance first.
Try the following before contacting Toshiba:
❖ Review the troubleshooting information in your
operating system documentation.
❖ If the problem occurs while you are running a program,
consult the program’s documentation for troubleshooting
suggestions. Contact the software company’s technical
support group for their assistance.
Detailed system specifications are available at
www.ts.toshiba.com by selecting your particular product and
model number, clicking GO, and then clicking the Detailed
Specs link from the menu on the left. Or just refer to the
computer documentation shipped with your product.
For the number of a Toshiba dealer near you, see “Toshiba
voice contact” on page 56.

5.375 x 8.375 ver 3.1

56 Toshiba voice contact

Contacting Toshiba
If you still need help and suspect that the problem is
hardware-related, Toshiba offers a variety of resources to help
you.
Toshiba’s Technical Support Website
For technical support, or to stay current on the most recent
software and hardware options for your computer, and for
other product information, be sure to regularly check the
Toshiba Web site at pcsupport.toshiba.com.
Toshiba voice contact
Before calling Toshiba, make sure you have:
❖ Your computer’s model and model number.
❖ Your computer’s serial number.
❖ The computer and any optional devices related to the
problem.
❖ Backup copies of your operating system and all other
preloaded software on your choice of media.
❖ Name and version of the program involved in the
problem along with its installation media.
❖ Information about what you were doing when the
problem occurred.
❖ Exact error messages and when they occurred.
For technical support, call the Toshiba Global Support
Centre:
❖ Within the United States at (800) 457-7777
❖ Outside the United States at (949) 859-4273

5.375 x 8.375 ver 3.1

 Power cord/cable connectors
57

Power cord/cable connectors

Your notebook computer features a universal power supply
you can use worldwide. The following figure shows the
shapes of the typical AC power cord/cable connectors for
various parts of the world.

USA and Canada United Kingdom Australia Europe

(UL and CSA (BS approved) (AS approved) (VDA and
approved) NEMKO approved)

Features and specifications

This section lists the computer’s features.

The product specifications and configuration information are

designed for a product Series. Your particular model may not have
all the features and specifications listed or illustrated. For more
detailed information about the features and specifications on your
particular model, visit Toshiba's Web site at pcsupport.toshiba.com.
While Toshiba has made every effort at the time of publication to
ensure the accuracy of the information provided herein, product
specifications, configurations, prices, system/component/options
availability are all subject to change without notice. For the most up-
to-date product information about your computer, or to stay current
with the various computer software or hardware options, visit
Toshiba's Web site at pcsupport.toshiba.com.

Technology and processor

Microprocessor Intel® Pentium® M Processor 755
(2.00 GHZ, 2 MB L2 cache, 400 MHz FSB)
Intel® Pentium® M processor 745
(1.80 GHz, 2 MB L2 cache, 400 MHz FSB)
Intel® Pentium® M Processor 735
(1.70 GHZ, 2 MB L2 cache, 400 MHz FSB)

5.375 x 8.375 ver 3.1

58 Features and specifications

Intel® Pentium® M processor 725

(1.60 GHz, 2 MB L2 cache, 400 MHz FSB)
Intel® Pentium® M processor 715
(1.50 GHz, 2 MB L2 cache, 400 MHz FSB)
Intel® Pentium® M processor 715A
(1.50 GHz, 2 MB L2 cache, 400 MHz FSB)
Intel® Pentium® M processor 710
(1.40 GHz, 2 MB L2 cache, 400 MHz FSB)
Intel® Celeron® M processor 360
(1.40 GHz, 1 MB L2 cache, 400 MHz FSB)
Intel® Celeron® M processor 350
(1.30 GHz, 1 MB L2 cache, 400 MHz FSB)
Intel® Celeron® M processor 340
(1.50 GHz, 512 KB L2 cache, 400 MHz FSB)
Intel® Celeron® M processor 330
(1.40 GHz, 512 KB L2 cache, 400 MHz FSB)
Intel® Celeron® M processor 320
(1.30 GHz, 512 KB L2 cache, 400 MHz FSB)
CPU performance in your computer product may vary from
specifications under the following conditions:
- use of certain external peripheral products
- use of battery power instead of AC power
- use of certain multimedia, computer generated graphics or
video applications
- use of standard telephone lines or low speed network
connections
- use of complex modeling software, such as high end
computer aided design applications
- use of several applications or functionalities simultaneously
- use of computer in areas with low air pressure (high altitude
>1,000 meters or >3,280 feet above sea level)

5.375 x 8.375 ver 3.1

 Features and specifications
59
- use of computer at temperatures outside the range of 5° C to
30° C (41° F to 86° F) or >25° C (77° F) at high altitude (all
temperature references are approximate and may vary
depending on the specific computer model – please refer to
your Resource Guide, or visit the Toshiba website at
www.pcsupport.toshiba.com for details).
CPU performance may also vary from specifications due to
design configuration.
Under some conditions, your computer product may automati-
cally shut-down. This is a normal protective feature designed to
reduce the risk of lost data or damage to the product when used
outside recommended conditions. To avoid risk of lost data,
always make back-up copies of data by periodically storing it
on an external storage medium. For optimum performance, use
your computer product only under recommended conditions.
Read additional restrictions under “Environmental Conditions”
in your product Resource Guide. Contact Toshiba Technical
Service and Support for more information.
Graphics Intel® 855GME (Integrated)* or
Mobile Intel® 915GM Express (128MB)* or
Mobile Intel® 910GML (128 MB)* or
ATI Mobility™ Radeon® X300 (64MB)* or
ATI Mobility™ Radeon® X600 (64MB or 128 MB)* or
ATI Mobility™ Radeon® X600 SE (64MB or 128 MB)* or
Discrete ATI Mobility™ Radeon® 9700 (64MB or
128 MB)*
*Graphics processor unit ("GPU") performance may vary
depending on product model, design configuration, applica-
tions, power management settings and features utilized. GPU
performance is only optimized when operating in AC power
mode and may decrease considerably when operating in battery
power mode.

Power
Main battery Removable, rechargeable Lithium-Ion (Li-Ion) high-capacity
battery (4300 mAh, 14.8V x 8 cell)
Removable, rechargeable Lithium-Ion (Li-Ion) high-capacity
battery (4300 mAh, 14.8V x 4 cell)
Battery recharge time is several hours*

5.375 x 8.375 ver 3.1

60 Features and specifications

*Battery life may vary considerably depending on product

model, configuration, applications, power management
settings and features utilized, as well as the natural
performance variations produced by the design of
individual components. Published battery life numbers are
achieved on select models and configurations tested by
Toshiba at the time of publication. Recharge time varies
depending on usage. Battery may not charge while
computer is consuming full power. After a period of time,
the battery will lose its ability to perform at maximum
capacity and will need to be replaced. This is normal for all
batteries. To purchase a new battery pack, see the
accessories information that shipped with your computer
or visit the Toshiba web site at accessories.toshiba.com.
RTC battery Lithium Ion or NiMH battery provides power for the internal
real-time clock and calendar

The RTC battery does not charge while the computer is turned off
even when the AC adapter is charging the computer.

Storage capacity
Hard disk 2.5-inch removable drive and controller provides non-volatile
storage for 40 GB, 60 GB, or 80 GB*.
*1 Gigabyte (GB) means 1000 x 1000 x 1000 = 1,000,000,000
bytes using powers of 10. The computer operating system,
however, reports storage capacity using powers of 2 for the def-
inition of 1 GB = 1024 x 1024 x 1024 = 1,073,741,824 bytes,
and therefore may show less storage capacity. Available storage
capacity will also be less if the product includes one or more
preinstalled operating systems, such as Microsoft Operating
System and/or preinstalled software applications, or media con-
tent. Actual formatted capacity may vary.

Ports
S-video port Lets you play DVD video on a projector or TV that accepts
video inputs.
DC IN Lets you connect the computer to AC power, using the AC
adapter and power cord/cable
Headphone jack Use the 3.5-mm, headphone jack to connect stereo headphones
or other audio output devices
Microphone jack The 3.5-mm, microphone stereo jack lets you connect an exter-
nal monaural microphone or other audio input device
RGB (monitor) port The 15-pin, analog VGA port lets you connect an external
SVGA monitor (color or monochrome)

5.375 x 8.375 ver 3.1

 Features and specifications
61
Modem port The modem port lets you connect the internal modem directly
to a telephone line (purchased separately) via an RJ11 connec-
tion
USB 2.0 ports Support USB 2.0 peripherals
LAN port The LAN port lets you connect to a LAN via an RJ45 connec-
tion
i.LINK® port The i.LINK® port (IEEE 1394) provides fast data transfer rates
(up to 400 Mbps)
Fast infrared port The Infrared Data Association (IrDA)-compliant serial infrared
port enables 4 Mbps (FIR mode) cableless data transfer with
IrDA 1.1-compatible external devices (only on selected mod-
els)
Bridge Media Adapter The Bridge Media Adapter Slot can be used for additional stor-
Slot age via Secure Digital™ Cards, xD-Picture Cards, Memory
Stick, or Memory Stick PRO (only on selected models)
Parallel port ECP-compatible parallel port that provides a Centronics-com-
patible connection to a printer or other parallel output or bi-
directional device. It gives increased performance when you are
using an ECP-compatible parallel device (only on selected
models)

Standard hardware
Memory The system may come with 256 MB or 512 MB of RAM (when
and if available), expandable to 2048 MB of RAM (2 GB) (GB
means 1 billion bytes)* **
*(GB means 1 billion bytes)
**The graphics system in your computer may use part of the
main system memory for graphics performance and therefore
reduce the amount of system memory available for other com-
puting activities. The amount of system memory allocated to
support graphics may vary depending on the graphics system,
applications utilized, system memory size and other factors.
Display options 15.4-inch diagonal standard wide TFT active-matrix LCD dis-
play at 1024 x 768 native resolution
15.4-inch diagonal standard wide TFT active-matrix LCD dis-
play at 1280 x 800 native resolution
*Over a period of time, and depending on the usage of the com-
puter, the brightness of the LCD Screen will deteriorate. This is
an intrinsic characteristic of LCD technology.
Screen will dim when the computer is operated on battery
power and you may not be able to increase the brightness of the
screen.

5.375 x 8.375 ver 3.1

62 Features and specifications

Communication Integrated V.92 56K* modem

For more detailed information regarding your system’s V.92
56K modem, visit the Toshiba Web site at
pcsupport.toshiba.com.
*Due to FCC limitations, speeds of 53 kbps are the maximum
permissible rates during downloads. Actual data transmission
speeds will vary depending on on-line conditions.
Networking Integrated Realtek 10/100 Base-TX Ethernet LAN adapter with
RJ45 port
Pointing device TouchPad pointing device provides the complete function of a
mouse or other pointing device
PC Card slot The PC Card slot lets you install one Type II PC Card
Minimum slot thickness: 5 mm
Sound controller Software Sound; built-in stereo speakers; SRS; full duplex
sound, 64-channel wavetable music synthesis; DirectSound®
Direct3D®Sound, DirectMusic®
DVD SuperMulti drive Compatibility: CD-R (read/write), CD-RW (read/re-write),
DVD-R (read/write), DVD-RW (read/write), DVD+R (read/
write), DVD+RW (read/write), DVD-RAM (read/write), CD-
ROM, DVD-ROM
DVD-ROM/ Compatibility: CD-ROM, CD-R (read/write),
CD-RW drive CD-RW (read/re-write), DVD-ROM, DVD-R (read only),
DVD-RW (read only), DVD-RAM (read only)
Wireless The computer may come with an optional integrated Wi-Fi
communication wireless LAN mini PCI communication module providing
wireless LAN functions.
The transmission speed over the wireless LAN and the
distance over which wireless LAN can reach may vary
depending on surrounding electromagnetic environment,
obstacles, access point design and configuration, and client
design and software/hardware configurations. The actual
transmission speed will be lower than the theoretical
maximum speed.

Toshiba recommends that Wi-Fi options be factory-installed at the

time of order.

5.375 x 8.375 ver 3.1

 63

Index
connecting
AC adapter 30
A power cord/cable 32
AC adapter 30 printer 32
AC power light 30
adding memory 33 D
alarms low battery 47 DC-IN 31
avoiding injury 28 display
screen is blank 53
B disposing of used batteries 51
battery DVD-ROM/multi-function drive
alarms 47 eject button 41
changing 47 removing a disc 44
disposal 51
installing 47 E
Li-Ion (Lithium-Ion) 45 environmental considerations 28
removing 48 ergonomics
built-in features 57 seating guidelines 29
buttons error messages
DVD-ROM/multi-function drive program has performed an illegal
eject 41 operation 52

C F
CD/DVDs FCC requirements 5
inserting 42 files
removing 44 backing up 39
CD-ROMs saving 38
using 41 H
changing hot swapping
main battery 47 precautions 38
comfort
chair 29 I
computer inserting
moving 45 PC Cards 37
placement 28 installing
running on battery power 45 main battery 47
setting up 33 memory module 33
computing tips 38 interference statement 20

RG 5.375 x 8.375 ver 2.3.3

64
internal drives 62 connecting 32
problem solving
K computer hangs when PC Card
keyboard
inserted 55
not working 53
computer will not power up 52
unexpected characters 53
contacting Toshiba 55, 56
L display is blank 53
lights illegal operation 52
AC power 30 keyboard
not responding 53
M
main battery keyboard produces unexpected
changing 47 characters 53
memory PC Card checklist 54
adding 33 PC Card slots appear dead 54
removing 36 program not responding 51
memory module R
removing 34 removing
Microsoft Windows XP 27 disc with computer off 44
moving the computer 45 PC Cards 37
running the computer on battery power
O
45
operating system 27
P S
PC Card safety
checklist 54 disposing of batteries 51
computer stops working 55 precautions 29
inserting 37 screen
problem solving 54 blank 53
removing 37 secondary control button 40
replacing 38 setting
port battery alarms 47
specifications 60 setting up
power AC adapter 30
cable connectors 57 computer 33
computer will not start 52 specifications 57
cord/cable 32 ports 60
specifications 59 power 59
power devices 62 standard hardware 61
precautions 29, 32 storage capacity 60
primary control button 40 standard hardware, specifications 61
printer storage capacity, specifications 60

RG 5.375 x 8.375 ver 2.3.3

 65
T
tips on computing 38
TouchPad
using 40
W
Web sites 56

RG 5.375 x 8.375 ver 2.3.3

PMA500067013
03/05