Python Programming (R19)

Unit -2
Topics to be covered
Control Statements: Definite iteration for Loop, Formatting Text for output,
Selection if and if else Statement, Conditional Iteration the While Loop
Strings and Text Files: Accessing Character and Substring in Strings, Data
Encryption, Strings and Number Systems, String Methods Text Files.
----------------------------------------------------------------------------------------
Control Statements
Introduction: The control statements are the program statements that allow
the computer to select a part of the code or repeat an action for specified
number of times. These statements are categorized into categories: Selection
statements, Iterative/Loop statements and Jump statements. First, we will
learn for iterative statement, then we will learn selection statements if and
else, later we will learn conditional iteration statement while.

Definite Iteration: The for Loop

The repetition statements execute an action for specified number of times.
These statements are also known as ‘Loops’. Each repetition of an action is
called ‘Pass’, or ‘Iteration’. If a loop able to repeat an action for a predefined
number of times then it is said to be definite Iteration. The Python’s for loop
supports the definite iteration.
Executing a statement, a Given Number of Times
If we want to print the line “It’s Alive! It’s Alive! It’s Alive”. This can be easily
printed using the definite loop statement as follow:

Exp1.py Output
for i in range(3): It's Alive! It's Alive! It's Alive!
print("It's Alive!",end=" ")

This for loop repeatedly calls one function that print () function. The constant
3 for the range() function specifies the number of times to repeat action. If we

www.Jntufastupdates.com 1
 Python Programming (R19)

want it 10 or 100 times then we can change 3 to 10 or to 100. The general

form of the for loop will be as follow:

for variable in sequence: # Loop Header

#Loop Body
statement1
statement2
…………
Statement N
The first line of code in a loop is sometimes called the loop header. The
sequence could be list, tuple, set, or string which contain finite number of
elements on which the loop iterates for each iteration. A sequence of elements
also can be created using range () function. The colon (:) ends the loop
header. The loop body comprises the statements in the remaining lines of
code, below the header. All the statements in the loop body must be indented
and aligned in the same column. These statements are executed in sequence
on each pass through the loop.

www.Jntufastupdates.com 2
 Python Programming (R19)

Write a python program to demonstrate calculating the exponentiation

using for loop.
We need three variables to represent the number, the exponent, and the
product. We can calculate the product on each pass by repeating the loop for
exponent number of times.

Exp2.py Output
number=int(input('Enter number:')) Enter number:2
exponent=int(input('Enter Exponent Enter Exponent value:3
value:')) 248
product=1
for i in range(exponent):
product=product*number
print(product,end=" ")

Count-Controlled Loops
Loops that count through a range of numbers are also called count-controlled
loops. The value of the count on each pass is used in computations. When
Python executes the type of for loop just discussed above, it actually counts
from 0 to the value of the integer expression minus 1 placed inside range ()
function. On each pass through the loop, the loop variable is bound to the
current value of the count.

Fact.py Output
num=int(input('Enter the number:')) Enter the number:4
product=1 4! is 24
for i in range(num):
"""i is loop variable,
its value used inside body
for computing product"""
product=product*(i+1)
print(f'{num}! is {product}')

Augmented Assignment
Expressions such as x = x + 1 or x = x + 2 occur so frequently in loops. The
assignment symbol can be combined with the arithmetic and concatenation
operators to provide augmented assignment operations. The general form is
as follow:

<variable> <operator>=<expression>
Which is equal to
<variable> =<variable> <operator><expression>

Following are several examples: Num+=2; x*=5; y/=12;

www.Jntufastupdates.com 3
 Python Programming (R19)

Traversing the Contents of a Data Sequence

The data sequence can be list, or tuple, string or set. The loop variable is
bound to the next value in the sequence. The sequence of numbers generated
using the range function can be converted into list or tuple. This tuple or list
can be later used in the place of the sequence.

Add.py Output
l=list(range(1,11)) [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
print(l) Sum of Elements of list is 55
s=0
for x in l: #here x is loop variable and
l is list
s=s+x
print('Sum of Elements of list is',s)

Loops That Count Down

All of our loops until now have counted up from a lower bound to an upper
bound. Once in a while, a problem calls for counting in the opposite direction,
from the upper bound down to the lower bound. When the step argument is
a negative number, the range function generates a sequence of numbers
from the first argument down to the second argument plus 1.

Countdown.py Output
l=list(range(10,0,-1)) [10, 9, 8, 7, 6, 5, 4, 3, 2, 1]
print(l) Sum of Elements of list is 55
s=0
for x in l: #here x is loop variable and
l is list
s=s+x
print('Sum of Elements of list is',s)

Formatting Text for output

Many data-processing applications in our day to day life require output needs
to be display in a tabular format. In this format, numbers and other
information are aligned in columns that can be either left-justified or right-
justified. A column of data is left-justified if its values are vertically aligned
beginning with their leftmost characters. A column of data is right-justified if
its values are vertically aligned beginning with their rightmost characters.
The total number of data characters and additional spaces for a given
datum in a formatted string is called its field width. The print function
automatically begins printing an output datum in the first available column.

www.Jntufastupdates.com 4
 Python Programming (R19)

Python includes a general formatting mechanism that allows the

programmer to specify field widths for different types of data. The simplest
form of this operation is:

<format_string>%<datum>

This version contains a format string, the format operator %, and a single
data value to be formatted. The format string is represented as: %<field
width>s. The format string begins with % operator, and positive number for
right-justification, and ‘s’ is used for string.

Format Information character

Integer d
String s
Float f

The format information for a data value of type float has the form:

%<fieldwidth>.<precision>f

where .<precision> is optional.

Examples:
>>> "%8s" % "PYT" # field width is 8, right justification, datum is string PYT.
' PYT'
>>> "%-8s" % "PYT" # field width is -8, left justification, datum is string PYT.
'PYT '
>>> "%8d" % 1234 # field width is 8, right justification, datum is int 1234.
' 1234'
>>> "%-8d" % 1234 # field width is -8, left justification, datum is int 1234.
'1234 '
>>> "%6.2f" % 1234.678 # field width is 6, 2 decimal points, right justification,
datum is int 1234.678
'1234.68'

Write a python program to display the following table format.

Read the number of years, starting balance, Interest, and Ending balance
from the keyboard.

Year Starting balance Interest Ending balance

1 10000.00 500.00 10500.00
2 10500.00 525.00 11025.00
3 11025.00 551.25 11576.25

www.Jntufastupdates.com 5
 Python Programming (R19)

year=int(input('Enter Number of Years:'))

rate=float(input('Enter Rate of Interest:'))
balance=float(input('Enter initial investment:'))
print("%4s%18s%10s%16s" % ("Year", "Starting Balance", "Interest", "Ending
Balance"))
endbal=0.0
for i in range(1,year+1):
inter=(balance*rate)/100
endbal=balance+inter
print("%4d%18.2f%10.2f%16.2f" % (i,balance,inter,endbal))
balance=endbal

Selection: if and if-else Statements (Two-Way Selection)

Sometimes based on the condition some part of the code should be selected
for execution, otherwise other part of the should be selected for execution.
This kind of statements are called selection statements. If the condition is
true, the computer executes the first alternative action and skips the
second alternative. If the condition is false, the computer skips the first
alternative action and executes the second alternative.
In this section, we explore several types of selection statements, or
control statements, that allow a computer to make choices.
The if-else statement is the most common type of selection statement.
It is also called a two-way selection statement, because it directs the
computer to make a choice between two possible alternatives.
The if-else statement is often used to check inputs for errors and to
respond with error messages if necessary. The alternative is to go ahead and

www.Jntufastupdates.com 6
 Python Programming (R19)

perform the computation if the inputs are valid. For example, suppose a
program takes area of a circle as input and need to compute its radius. The
input must always a positive number. But, by mistake, the user could still
enter a zero or a negative number. Because the program has no choice but to
use this value to compute the radius, it might produce a meaningless output
or error message.
If area<=0 then convey user to enter valid area as input
Otherwise compute the radius as sqrt(area/PI)
Here is the Python syntax for the if-else statement:

if <condition>:
<sequence of statements-1>
else:
<sequence of statements-2>

The condition in the if-else statement must be a Boolean expression—that

is, an expression that evaluates to either True or False. The two possible
actions each consist of a sequence of statements. The Flow diagram of the if -
else statement will be as follow as shown in the Figure and Dimond symbol
used for representing the condition.

Write a program to find the radius from the area of the circle.

import math
area=float(input('Enter area:'))
if area<=0:
print("Wrong Input!")
else:
radius=math.sqrt(area/math.pi)
print('The radius is:',radius)

www.Jntufastupdates.com 7
 Python Programming (R19)

One-Way Selection Statements

The simplest form of selection is the if statement. This type of control
statement is also called a one-way selection statement, because it consists
of a condition and just a single sequence of statements. If the condition is
True, the sequence of statements will be executed. Otherwise, control
proceeds to the next statement following the entire selection statement.
The Syntax will be as follow:

If <Boolean_Expression>:
Sequence of statement to execute
Next ststement after if selection statement

Flow diagram of if

Multi-Way if Statements
The process of testing several conditions and responding accordingly can be
described in code by a multi-way selection statement. This multi-way
decision statement is preferred whenever we need to select one choice among
multiple alternatives. The keyword ‘elif’ is short for ‘else if’. The else statement
will be written at the end and will be executed when no if or elif blocks are
executed. The syntax of will be as follow:
if Boolean_expression1:
Statements
elif Boolean_expression2:
Statements
elif Boolean_exxpression3:
Statements
else:
Statements

www.Jntufastupdates.com 8
 Python Programming (R19)

Flow diagram

Logical Operators and Compound Boolean Expressions

Often a course of action must be taken if either of two conditions is true. For
example, valid inputs to a program often lie within a given range of values.
Any input above this range should be rejected with an error message, and any
input below this range should be dealt with in a similar fashion. The two
conditions can be combined in a Boolean expression that uses the logical
operator or. The logical operator and also can be used to construct a
different compound Boolean expression to express this logic.
Example Program using the logical or

marks=int(input('Enter your marks'))

if marks>100 or marks < 0:
print('Marks must be within the range 0 to 100')
else:
print('Here you can write the code to process marks')

Example Program using the logical and

marks=int(input('Enter your marks'))

if marks>0 and marks < 100:
print('Here you can write the code to process marks')

else:
print('Marks must be within the range 0 to 100')

www.Jntufastupdates.com 9
 Python Programming (R19)

Conditional Iteration The While Loop.

Conditional iteration requires that a condition be tested within the loop to
determine whether the loop should continue. Such a condition is called the
loop’s continuation condition. If the continuation condition is false, the loop
ends. If the continuation condition is true, the statements within the loop are
executed again.
The while loop is conditional iteration statement and is frequently used to
execute a block of statements repeatedly until some condition remains true.
The syntax will be as follow:

while <condition>:
<sequence of statements>

Here while is the keyword, condition will be always a Boolean expression, and
the loop end with colon (:). The first line is called loop body. The sequence of
statement that we write inside the body is called loop body.
The flow diagram will be as follow:

Write a python program to find the sum of all the numbers entered
from the user.
Tot.py Output
data=input('Enter any number:') Enter any number:2
tot=0 Enter any number:3
while data!="": Enter any number:4
data=int(data) Enter any number:5
tot=tot+data Enter any number:
data=input('Enter any number:') The sum of numbers is: 14
print('The sum of numbers is:',tot)

Count Control with a while loop

You can also use a while loop for a count-controlled loops. This loop control
variable must be explicitly initialized before the loop header and

www.Jntufastupdates.com 10
 Python Programming (R19)

incremented in the loop body. The count variable must also be examined in
the explicit continuation condition. The following are the some example for
count-controlled loops.
Write a python program to find sum of all the digits of a given number?
Total.py Output
num=int(input('Enter number :')) Enter number :234
rem=0 The sum of all digits is: 9
tot=0
while num>0:
rem=num%10
tot=tot+rem
num=num//10
print('The sum of all digits is:',tot)

Write a python program to determine whether a given number is

palindrome or not.

Palindrome.py Output
num=int(input('Enter number :')) Enter number :121
rem=0 The reversed number is: 121
x=num 121 is palindrome
rev=0
while num>0: Enter number :123
rem=num%10 The reversed number is: 321
rev=rev*10+rem 123 is not palindrome
num=num//10
print('The reversed number is:',rev)
if x==rev:
print(x,'is palindrome')
else:
print(x,'is not palindrome')

Write a python program to determine whether a given number is

Armstrong number or not.
A number is an Armstrong Number if it is equal to the sum of its own digits
raised to the power of the number of digits.

Armstrong.py Output
d=input('Enter number :') Enter number :153
num=int(d) The sum of cubes is: 153
tot=0 153 is Armstrong
x=num
rev=0 Enter number :435

www.Jntufastupdates.com 11
 Python Programming (R19)

The sum of cubes is: 216

while num>0: 435 is not Armstrong
rem=num%10
tot=tot+(rem**int(len(d))) Enter number :1634
num=num//10 The sum of cubes is: 1634
print('The sum of cubes is:',tot) 1634 is Armstrong
if x==tot:
print(x,'is Armstrong')
else:
print(x,'is not Armstrong')

Jump statements with while loop

We can use the jump statements inside the while loop
we have three jump statements: break, continue and pass.
 When break is used inside the while loop it terminates the current loop
and resumes execution at the next statement, just like the traditional
break statement in C.
 The continue statement skips all the remaining statements in the
current iteration of the loop and moves the control back to the top of
the loop.
 The pass statement does nothing, but it simply transfers control to
the next statement.
Else with while loop
It is executed when the condition becomes false (with while loop), but not
when the loop is terminated by a break statement.
Syntax:

i=1
while i < 6:
print(i)
i += 1
else:
print ("i is no longer less than 6")

Strings and Text Files: (Part -2 of Unit 2)

Accessing Character and Substring in Strings
So far, we have learned how to use strings for input and output. We have learned how
to combined two strings which is called concatenation. We also have learned how to fetch each

www.Jntufastupdates.com 12
 Python Programming (R19)

character from the string using the for loop. In this section we will learn how to fetch the desired
portions of the string called substrings.
The Structure of Strings
A string is a sequence of zero or more characters. It is treated as a data structure. A data
structure is a compound unit that consists of several smaller pieces of data. When working with
strings, the programmer sometimes must be aware of a string’s length and the positions of the
individual characters within the string. A string’s length is the number of characters it contains.
The length can be obtained using the len() function by passing the string as an argument to it.
The positions of a string’s characters are numbered from 0, on the left, to the length of the
string minus 1, on the right.

In the above string ‘Python’, the number of characters is 6, the position of the starting character
is o, and last character is length of the string minus 1 (i.e 6-1).
The Subscript Operator
Though the for loop helps to fetch individual characters from the given string. Sometimes it
may be need to extract the character at specified position. This can be done using the subscript
operator. The form of a subscript operator is the following:
<a string> [<an integer expression>]
The first part of the subscript operator is the string that you want to inspect, the integer
expression in square brackets is the position of the character that we want to inspect in that
string. This integer expression is also called ‘Index’. Example:
S= “Python”
S[0] -> gives ‘P’
S[1] -> gives ‘y’
S[5] -> gives ‘n’
Slicing for Substrings
The portions of the strings or parts of the strings are called “Substrings”. we can use Python’s
subscript operator to obtain a substring through a process called slicing. To extract a substring,
the programmer places a colon (:) in the subscript. An integer value can appear on either side
of the colon. The form of the slicing will be as follow: <a string> [start_position :
End_position], here the substring is obtained from the start_position but not including the
End_position.

www.Jntufastupdates.com 13
 Python Programming (R19)

Example:
S[0:3] -> gives a substring ‘Pyt’
S[2:5] -> gives the substring ‘tho’

Testing for a Substring with the in Operator

Sometimes we want to fetch the strings from the list of strings that contain a substring. This
can be done using the membership operator ‘in’. If the substring is part of the strings in a list
then we want to put all such strings into separate list or can be displayed.
Example program:
Write a python program that display all the strings that match with the given substring.

l=['prg1.py','sort.txt','substring.py','add.c','mul.cpp','eventest.py']
l2=[]
sub=input('Enter the substring:')
for x in l:
if sub in x:
l2.append(x)
print(x)
#display final list2
print(l2,end=" ")

Data Encryption
The information travelling through the network is vulnerable(exposed) to the spies and
potential thieves. By using the right sniffing software, a person can get the information passing
between any two computers. Many applications use Data Encryption to protect the information
transmitted on the network.
General scenario of security attacks
Security attack: Any action that compromises the security of information owned by an
organization is called security attack.
Security attacks are classified into two: Passive and Active
Passive Attacks - Passive attacks are in the nature of eavesdropping (secretly listening private
conversation) on transmissions. There are two types as follow:

 Release of message contents –unauthorized person listens to the message from sender
to the receiver
 Traffic analysis - unauthorized person observes the patterns of messages.

www.Jntufastupdates.com 14
 Python Programming (R19)

Active Attacks
Active attacks involve some modification of data stream or the creation of a false stream. These
are sub divided into four categories :

 Masquerade-one entity pretends to be a different entity

 Replay- involves the passive capture of a data until its subsequent retransmission to
produce an unauthorized effect.
 modification of messages - some portion of a legitimate message is altered
 denial of service -Another form of service denial is the disruption of an entire network
Need of data encryption
The process of converting the information in such way that it cannot be understood by the
unauthorized user is called data encryption. The reverse process is called decryption. Some
application protocols such as FTPS, and HTTPS are used to provide security to the information
transmitted over the network.
Basics of Data Encryption
 The information that is to be transmitted is called ‘Plain Text’
 The sender encrypts the message by translating it into a secret code, which is known as
‘Cipher Text’
 The receiver at the other end decrypts the cipher text into original message or plain text.
 Both parties use keys to encrypt and decrypt messages which are known as secret keys.
 A very simple encryption method that has been in use for thousands of years is called a
Caesar cipher.
Caesar cipher
 This encryption strategy replaces each character in the plain text with the character that
occurs at given distance away in the sequence.
 For positive distances, the method wraps around to the beginning of the sequence to
locate the replacement characters for those characters near its end.
 For example, if the distance value of a Caesar cipher equals five characters, the string
“invaders” would be encrypted as “nsafijwx.”
 Here, ‘invaders’ is called plain text and ‘nsafijwx’ is called cipher text.

www.Jntufastupdates.com 15
 Python Programming (R19)

Implementing Caesar cipher method for encryption

pt=input('Enter your text:')

dist=int(input('Enter distance:'))
ct=""
for ch in pt:
ordvalue=ord(ch)
ciphervalue=ordvalue+dist
if ciphervalue>ord('z'):
ciphervalue=ord('a')+dist-(ord('z')-ordvalue+1)
ct=ct+chr(ciphervalue)
print(ct)

Implementing Caesar cipher method for decryption

code=input('Enter your text:')

dist=int(input('Enter distance:'))
plaintext=""
for ch in code:
ordvalue=ord(ch)
ciphervalue=ordvalue-dist
if ciphervalue<ord('a'):
ciphervalue=ord('z')-(dist-(ord('a')-ordvalue+1))
plaintext=plaintext+chr(ciphervalue)
print(plaintext)

Strings and Number Systems

When you perform arithmetic operations, you use the decimal number system. This system,
also called the base ten number system, uses the ten characters 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9 as
digits. The binary number system is used to represent all information in a digital computer.
The two digits in this base two number system are 0 and 1. To identify the system being used,
you attach the base as a subscript to the number. For example, the following numbers represent
the quantity 41510

www.Jntufastupdates.com 16
 Python Programming (R19)

The digits used in each system are counted from 0 to n - 1, where n is the system’s base.
• Binary system base is 2, hence it includes digits from 0 to 2-1 [0,1]
• Octal system base is 8, hence it includes digits from 0 to 8-1 [0,1,2,3,4,5,6,7]
• Decimal system base is 10, hence it includes digits from 0 to 10-1 [0,1,2,3,4,5,6,7,8,9]
• Hexadecimal system base is 16, hence it includes digits from 0 to 16-
1[0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F]
The Positional System for Representing Numbers
 The value of each digit in a number is determined by the digit’s position in the
number.
 In other words, each digit has a positional value.
 The positional value of a digit is determined by raising the base of the system to
the power specified by the position (base position).
 For an n-digit number, the positions (and exponents) are numbered from n - 1
down to 0, starting with the leftmost digit and moving to the right.
 the positional values of the three-digit number 41510 are 100 (102), 10 (101), and 1
(100) { where n is 3, hence positions are 3-1 to 0}
 To determine the quantity represented by a number in any system from base 2
through base 10, you multiply each digit (as a decimal number) by its positional
value and add the results.
 The following example shows how this is done for a three-digit number in base
10:

Converting Binary to Decimal

 Like the decimal system, the binary system also uses positional notation.
 However, each digit or bit in a binary number has a positional value that is a
power of 2.
 The binary number can be referred as a string of bits or a bit string.
 To get the decimal number, multiply the value of each bit (0 or 1) by its positional
value and add the results. Let’s do that for the number 11001112:

www.Jntufastupdates.com 17
 Python Programming (R19)

Implementing Binary number to Decimal number in Python

bstring=input('Enter the bit string :')

Enter the bit string :101
decimal=0
The decimal value is : 5
exponent=len(bstring)-1
Enter the bit string :1100111
for digit in bstring:
The decimal value is : 103
decimal=decimal+int(digit)*2**exponent
exponent=exponent-1
#printing the equivalnet decimal value
print('The decimal value is :',decimal)

Implementing Decimal to Binary in Python

www.Jntufastupdates.com 18
 Python Programming (R19)

Enter number:10
5 0 0
2 1 10
1 0 010
0 1 1010
The binary representation is: 1010
decimal=int(input('Enter number:'))
bstring="" Octal and Hexadecimal
if decimal ==0: Numbers
 We have function
print(0)
like oct() and hex() to
else: convert the numbers into
decimal to octal, and
while decimal >0: decimal to hexadecimal
rem=decimal%2 numbers.

bstring=str(rem)+bstring  To convert from

octal to binary, you start
decimal=decimal//2 by assuming that each
digit in the octal number
print("%5d%8d%12s" % (decimal, rem, bstring))
represents three digits in
print('The binary representation is :',bstring) the corresponding binary
number.
 You then start with the leftmost octal digit and write down the corresponding binary
digits, padding these to the left with 0s to the count of 3, if needed.

 Each digit in the hexadecimal number is equivalent to four digits in the binary
number.

www.Jntufastupdates.com 19
 Python Programming (R19)

 Thus, to convert from hexadecimal to binary, you replace each hexadecimal digit with
the corresponding 4-bit binary number.
 To convert from binary to hexadecimal, you factor the bits into groups of four and
look up the corresponding hex digits.

String Methods
Text processing involves many different operations on strings. Python
includes a set of string operations called methods. A method behaves like
a function, but has a slightly different syntax. Unlike a function, a Method
is always called with a given data value called an object, which is placed
before the method name in the call. The syntax of a method call is the
following:
<object>.method_name(arg1,arg2,….argn)
Example:

txt=“apple is good for health than mango, one apple a day keeps a doctor
away”.
print(txt.count(‘apple’))

Methods can also expect arguments and return values. A method knows
about the internal state of the object with which it is called. The methods
are as useful as functions, but we need to use the dot notation which we
have already discussed with module concept. Every data type includes a
set of methods to use with objects of that type.
We will see some useful methods of string object.

Method Description Example

s.center(width) Returns a copy of s s='apple’

centered within the
s.center(20)
given number of
spaces. ' apple '

www.Jntufastupdates.com 20
 Python Programming (R19)

s.count(substring, Returns the number txt=“apple is good for health

start,end) of non-overlapping than mango, one apple a day
occurrences of keeps a doctor away”
substring in s. start
txt.count(‘apple’)
and end are used to
verify in a slice

s.endswith(substring) Returns True if s s='program1.py'

ends with substring
s.endswith('.py')
or False
True
otherwise

s.find(substring) Returns the index of s='My kids like apple than

first occurrence of orange'
substring if found,
s.find('apple')
otherwise return -1
13
>>> s.find('papaya')
-1

s.isalpha() Returns True if s s='My kids like apple than

contains only letters orange'
or >>> s.isalpha()
False otherwise. False
>>> s="apples"
>>> s.isalpha()
True

s.isdigit() Returns True if s >>> s='123456'

contains only digits >>> s.isdigit()
or True
False otherwise

s.join(sequence) Takes all the items in >>>

the sequence, and l=['twitter','facebook','whatsapp']
joins them into one >>> '#'.join(l)
string using the 'twitter#facebook#whatsapp'
separator as string.

s.lower() Returns a copy of s >>> s='APPLE'

converted to >>> s.lower()
lowercase 'apple'

www.Jntufastupdates.com 21
 Python Programming (R19)

s.replace(old, new) Returns a copy of s >>> s='i like ice cream. it is very
with all occurrences tasty'
of substring old >>> s.replace('i','I')
replaced by new. 'I lIke Ice cream. It Is very tasty'

s.split([sep]) Splits the string into >>> s='hello, i am KSR, i teach

list of words using python programming'
the separator. The >>> s.split(',')
default separator is ['hello', ' i am KSR', ' i teach
space. We can use python programming']
comma, or any other
character as
separator.

s.startswith(substring) Returns True if the >>> s='Python is powerful

string starts with the language among all oop'
specified substring, >>> s.startswith('Pyt')
otherwise False True
>>> s.startswith('pyt’)
False

s.strip([aString]) Removes the white >>> s=' APPLE '

spaces in the >>> s
beginning and ' APPLE '
ending of a string >>> s.strip()
'APPLE'

s.upper() Returns a copy of s >>> s='apple'

converted to >>> s.upper()
uppercase. 'APPLE'

s.isalnum() Returns if the string >>> s='apple’

contains >>> s.isalnum()
alphanumeric True
characters, otherwise
False

s.isalpha() Returns True if the >>> s='Python Programming'

string contains only >>> s.isalpha()
alphabets otherwise False
False.

s.title() Converts the given >>> s='python programming'

string into title >>> s.title()
format, where first 'Python Programming'

www.Jntufastupdates.com 22
 Python Programming (R19)

character of each
word is capitalized

Some other methods of string class

Lstrip() - Used to remove leading spaces
Rstrip() - Used to remove spaces after the string or trailing spaces
Istitle() -used to test whether it is a title or not. If it is title returns True,
otherwise returns False.

Casefold() - The casefold() method is an aggressive lower() method which

converts strings to case folded strings for caseless matching.

Format() –Format Type

:<, left assign
:> , Right assign
:, Inserts comma as thousand separator
:b, converts string into binary
:o, converts string into octal
:x, converts string into hexadecimal
Example:
‘{:,}’.format(12345678)
Output:
12,345,678

Isidentifier() -used to test whether it is an identifier.

Maketrans(‘s1’,’s2’) – Creates a translate table.
Translate(table) - This translate the string using the translate table.
Partition(substring) -The partition() method searches for a specified string,
and splits the string into a tuple containing three elements.
Text Files
Using a text editor such as Notepad or TextEdit, you can create, view, and
save data in a text file. The data in a text file can be viewed as characters,

www.Jntufastupdates.com 23
 Python Programming (R19)

words, numbers, or lines of text. When the data are treated as numbers (either
integers or floating-points), they must be separated by whitespace
characters—spaces, tabs, and newlines. For example, a text file containing
six floating-point numbers might look like:
34.6 22.33 66.75 77.12 21.44 99.01
All data output to or input from a text file must be strings. Thus, numbers
must be converted to strings before output, and these strings must be
converted back to numbers after input.
Writing Text to a File
 Data can be output to a text file using a file object.
 Python’s open function, which expects a file pathname and a mode string
as arguments, opens a connection to the file on disk and returns a file
object.
 The mode string is 'r' for input files and 'w' for output files.
 Thus, the following code opens a file object on a file named myfile.txt for
output:
f=open(“myfile.txt”,'w')
 If the file does not exist, it is created with the given pathname.
 If the file already exists, Python opens it. When data are written to the file
and the file is closed, any the data that is already existing in the file will be
erased.
 String data are written (or output) to a file using the method write method
with the file object. The write method expects a single string argument.
 If you want the output text to end with a newline, you must include the
escape character \n in the string.

 f.write(“First line.\nSecond line.\n”)

 When all of the outputs are finished, the file should be closed using the
method close, as follows:

 f.close()

f=open('firstfile.txt','w')
f.write('Python is the number 1 language among the existing languages.\
\n It is an object oriented programming language.\
\n It is high-level and easy language\n')
f.close()

Output

www.Jntufastupdates.com 24
 Python Programming (R19)

Writing Numbers to a File

 The file method write expects a string as an argument. Therefore, other
types of data, such as integers or floating-point numbers, must be
converted to strings before being written to an output file.
 These data types can be easily converted into string using the str()
function.
 The resulting strings are then written to a file with a space or a newline
as a separator character.
 We can generate random numbers and put them in a file using the
write() function by converting them to string using str() function.
Source Code

import random
f=open('nums.txt','w')
for n in range(20):
number=random.randint(1,100)
f.write(str(number)+"\n")
f.close()

Reading Text from a File

www.Jntufastupdates.com 25
 Python Programming (R19)

 You open a file for input in a manner similar to opening a file for output.
 The only thing that changes is the mode string, which, in the case of
opening a file for input, is 'r’.
 However, if the pathname is not accessible from the current working
directory, Python raises an error.
 Here is the code for opening myfile.txt for input:
 F=open(‘myfile.txt’, ‘r’)
 There are several ways to read data from an input file.
o We can use read() function which reads the entire content of a
file as single string.
o We can use for() loop which considers the file object as a lines of
text.
o We can use the readline() method of file object which is used to
read specific line from the file (say first line).

#using the read() function #using the for() loop

f=open('firstfile.txt','r') f=open('firstfile.txt','r')
s=f.read() for line in f:
print(s) print(line, end="")

using the readline() method to read a line

www.Jntufastupdates.com 26
 Python Programming (R19)

#using the readline() method to read a line

of file object
f=open('firstfile.txt','r')
print(f.readline())

using the readline() method to read all the lines

#reading all the lines

f=open('firstfile.txt','r')
while True:
line =f.readline()
if line=="":
break
Reading Numbers from a File
print(line)
 All of the file input operations return data to the program as strings.
 If these strings represent other types of data, such as integers or
floating-point numbers, the programmer must convert them to the
appropriate types before processing them further.
 Each line in the file may contain spaces. These spaces can be removed
using the strip() method of the string class.
Example Program to add all the integers in a text file

f=open('nums.txt','r')
sum=0
for line in f:
n=line.strip()
sum=sum+int(n)
print('The sum of all the numbers is:',sum)

Accessing and Manipulating Files and Directories on Disk

www.Jntufastupdates.com 27
 Python Programming (R19)

 Sometimes it is better to test the current working directory for a file

whether it is existing or not.
 We can know the current working directory
 We can list all the files in the current working directory
 We can create new directory
os module functions

os module function Description

chdir(path) Changes the current working directory to path
getcwd() Returns the path of the current working
directory.
listdir(path) Returns a list of the names in directory named
path.
mkdir(path) Creates a new directory named path and places
it in the current working directory.
remove(path) Removes the file named path from the current
working directory.
rename(old, new) Renames the file or directory named old to new

os.path functions
os.path functions Description
exists(path) Returns True if path exists and False otherwise.
isdir(path) Returns True if path names a directory and False
otherwise.
isfile(path) Returns True if path names a file and False
otherwise.
getsize(path) Returns the size of the object names by path in
bytes.

Example:
• os.path.exists(‘nums.txt’) True 

• Os.path.isdir(os.getcwd()) True 

• os.path.isfile('nums.txt’) True 

• os.path.getsize(os.getcwd()) 12288 bytes 

www.Jntufastupdates.com 28
 Python Programming (R19)

*******End of Unit 2*******

www.Jntufastupdates.com 29