Pump size & type / Stages : 1.
5LLR-10A /2
Based on curve no. : A-19631
Impeller diameter : 219 mm
Customer :- Capacity : 25.0 m³/h
Item number :- Head : 165.00 m
Service : Bombeo de agua Density / Specific gravity : - / 1.000
Flowserve reference : 5284343234 Pump speed : 3,550 rpm
Date : April 21, 2025 Ns / Nss (per eye) : 590 / 5,850 (US)
Test tolerance : ANSI/HI 14.6 Grade 1B
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
The customer must provide a minimum NPSHa of 3.3 m.
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Hydraulic Datasheet
Customer :- Pump / Stages : 1.5LLR-10A /2
Customer reference :- Based on curve no. : A-19631
Item number :- Flowserve reference : 5284343234
Service : Bombeo de agua Date : April 21, 2025
Operating Conditions Materials / Specification
Capacity (rated/normal) : 25.0 m³/h / - Material column code : SF
Water capacity (CQ=1.00) :- Pump specification :-
Total developed head : 165.00 m Other Requirements
Water head (CH=1.00) :- Hydraulic selection : No specification
NPSHa/NPSHa less margin : Ample / - Construction : No specification
Maximum suction pressure : 0.0 psig Test tolerance : ANSI/HI 14.6 Grade 1B
Liquid Driver Sizing : Max Power(MCSF to EOC) using SF
Liquid type : Other
Liquid description : Agua
Temperature : 31 °C
Density / Specific gravity : - / 1.000
Solid Size - Actual / Limit : - / 8.890 mm
Viscosity / Vapor pressure : 1.00 cSt / 0.00 psia
Performance
Hydraulic power : 15.0 hp Impeller diameter
Pump speed : 3,550 rpm Rated : 219 mm
Pump overall efficiency (CE=1.00) : 48.0 % Maximum : 248 mm
NPSH required (NPSH3) (CNPSH=1.00) : 3.3 m Minimum : 197 mm
Rated brake power : 31.4 hp Ns / Nss (per eye) : 590 / 5,850 (US)
Minimum continuous flow : 11.4 m³/h
Maximum brake power : 38.4 hp Maximum head at rated diameter : 184.26 m
Driver power rating : 40.0 hp / 29.8 kW Flow at BEP : 30.6 m³/h
Casing working pressure : 261.7 psig Flow as % of BEP : 81.6 %
(based on shut off @ cut dia/rated SG) Efficiency at normal flow :-
Maximum allowable : 350.0 psig Impeller diameter ratio (rated/max) : 88.5 %
Hydrostatic test pressure : 560.0 psig Head rise to shut off : 11.7 %
Estimated rated seal chamber pressure :- Total head ratio (rated / max) / (max / rated) : 72.5 % / 138.0 %
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
The customer must provide a minimum NPSHa of 3.3 m.
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Construction Datasheet
Customer :- Pump / Stages : 1.5LLR-10A /2
Customer reference :- Based on curve no. : A-19631
Item number :- Flowserve reference : 5284343234
Service : Bombeo de agua Date : April 21, 2025
Construction Driver Information
Nozzles Size Rating Face Position Manufacturer :-
Suction 3.00 - - Side Power : 40.0 hp / 29.8 kW
Discharge 1.50 - - Side Service factor (requested / actual) : 1.15 / -
Casing mounting : Foot Synchronous speed : 3,600 rpm
Casing split : Axial Orientation / Mounting : Horizontal / -
Impeller type : Closed Driver type :-
Bearing type (radial) : Single Row Frame-size / material :-/-
Bearing number (radial) : 6305J Enclosure :-
Bearing type (thrust) : Double Row Hazardous area class :-
Bearing number (thrust) : 7305BYG Explosion 'T' rating :-
Bearing lubrication :- Volts / Phase / Hz : 460 V / - / 60 Hz
Rotation (view from coupling) :- Amps-full load/locked rotor :-/-
Materials Motor starting : Direct on line (DOL)
Casing :- Insulation :-
Impeller :- Temperature rise :-
Case wear ring :- Bearings :-
Impeller wear ring :- Lubrication :-
Inducer : N/A Motor mounted by :-
Shaft :- Sound Pressure (dBA @ 1.0 m)
Sleeve :- Driver, expected :-
Baseplate, Coupling and Guard Pump & driver, estimated :-
Baseplate type :- Seal Information
Baseplate material :- Arrangement :-
Coupling manufacturer :- Size : 1.50
Coupling size :- Manufacturer / Type :-/-
Coupling / Shaft guard :- Material code (Man'f/API) :-/-
Weights (Approx.) Internal neck bushing :-
Bareshaft pump (net) : 360.0 lb Gland
Baseplate (net) :- Gland material :-
Driver (net) :- Flush :-
Shipping gross weight/volume : *** / - Vent :-
Testing Drain :-
Hydrostatic test :- Auxiliary seal device : None
Performance test :- Piping
NPSH test :- Seal flush plan :-
Paint and Package Seal flush construction :-
Pump paint :- Seal flush material :-
Base grout surface prep :- Aux seal flush plan : None
Shipment type :- Aux seal flush construction :-
Aux seal flush material :-
Notes
-
XSD Drawing No. TBA
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Full Page GA Drawing
-
Customer :- Pump size & type : 1.5LLR-10A Drawing number :-
Item number :- Pump speed / Stages : 3,550 rpm / 2 Date : April 21, 2025
Service : Bombeo de agua Flow / Head : 25.0 m³/h / 165.00 m Certified by / Date : :-
Customer PO # :- Driver power / Frame : 40.0 hp / 29.8 kW / - Seal type :-
Flowserve reference : 5284343234 Volts / Phase / Hz : 460 V / - / 60 Hz Seal flush plan :-
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
Customer :- Capacity : 25.0 m³/h
Item number :- Head : 165.00 m
Service : Bombeo de agua Density / Specific gravity : - / 1.000
Flowserve reference : 5284343234 Pump speed : 3,550 rpm
Pump size & type / Stages : 1.5LLR-10A /2 Ns / Nss (per eye) : 590 / 5,850 (US)
Based on curve no. : A-19631 Pump WR² at 3,550 rpm : 7.90 lb-ft²
Impeller diameter : 219 mm
Date : April 21, 2025
CURVES ARE APPROXIMATE, PUMP IS GUARANTEED FOR ONE SET OF CONDITIONS; CAPACITY, HEAD, AND EFFICIENCY.
Copyright © 2016 Flowserve. All rights reserved. Affinity v2.23.3
