COMPLETE REVISION

October 2006

Process Industry Practices

Piping

PIP PN03SD0S02
Piping Material Specification 3SD0S02
Class 300, 316/316L Stainless Steel, Socket Weld,
0.000" C.A. Process (PTFE Packing/Gaskets)
 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES

In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major
industrial users, contractors, or standards organizations. By harmonizing these
technical requirements into a single set of Practices, administrative, application, and
engineering costs to both the purchaser and the manufacturer should be reduced. While
this Practice is expected to incorporate the majority of requirements of most users,
individual applications may involve requirements that will be appended to and take
precedence over this Practice. Determinations concerning fitness for purpose and
particular matters or application of the Practice to particular project or engineering
situations should not be made solely on information contained in these materials. The
use of trade names from time to time should not be viewed as an expression of
preference but rather recognized as normal usage in the trade. Other brands having the
same specifications are equally correct and may be substituted for those named. All
Practices or guidelines are intended to be consistent with applicable laws and
regulations including OSHA requirements. To the extent these Practices or guidelines
should conflict with OSHA or other applicable laws or regulations, such laws or
regulations must be followed. Consult an appropriate professional before applying or
acting on any material contained in or suggested by the Practice.

This Practice is subject to revision at any time.

© Process Industry Practices (PIP), Construction Industry Institute, The

University of Texas at Austin, 3925 West Braker Lane (R4500), Austin,
Texas 78759. PIP member companies and subscribers may copy this Practice
for their internal use. Changes, overlays, addenda, or modifications of any
kind are not permitted within any PIP Practice without the express written
authorization of PIP.

PRINTING HISTORY
October 1995 Issued as PIP PN03SD0G February 2000 Revision
February 1999 Revision February 2001 Technical Correction
June 1999 Revision ____ 2006 Complete Revision

Not printed with State funds

COMPLETE REVISION PIP PN03SD0S02
October 2006 Piping Material Specification Line Class 3SD0S02

SERVICE: Process MATERIAL: 316/316L Dual Marked

RATING CLASS: 300, ASME B16.5a-1998 DESIGN CODE: ASME B31.3-2004
TEMPERATURE LIMIT: -20F to 400F (Note 09) STRESS RELIEF: None Required
NOMINAL CORROSION ALLOWANCE: 0.000 in. EXAMINATION: Per ASME B31.3

PRESSURE - TEMPERATURE RATINGS

TEMP F -20 to 100 200 300 400
TEMP C -29 to 38 93 149 204
For NPS 1/2 through NPS 12 (Full flange ratings per ASME B16.5, Table 2-2.2.)
psig 720 620 560 515
kPag 4965 4275 3860 3550
For NPS14 through NPS 24 (Note 01)
psig Calc Calc Calc Calc
kPag Calc Calc Calc Calc

ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE

PIPE 01, 21
1/2 – 3/4 40S SS, EFW, ASTM A312-TP 316/316L (Ej=0.80)
1–4 10S SS, EFW, ASTM A312-TP 316/316L (Ej=0.80)
6 – 12 40S SS, EFW, ASTM A312-TP 316/316L (Ej=0.80)
14 – 24 Calc SS, EFW, ASTM A312-TP 316/316L (Ej=0.80)
NIPPLES 03
Branch 1/2 – 1-1/2 40S SS, EFW, ASTM A312-TP 316/316L (Ej=0.80)
Swage (CONC) 1/2 – 1-1/2 40S SS, ASTM A403-WP 316-S/316L-S, MSS SP-95
Swage (ECC) 1/2 – 1-1/2 40S SS, ASTM A403-WP 316-S/316L-S, MSS SP-95
FITTINGS 02
SW Pipet 1/2 – 1-1/2 Class 300 Weld SS, ASTM A182-F316/316L
THRD Pipet 03 1/2 – 2 Class 300 Weld SS, ASTM A182-F316/316L
SW Lateral Pipet 1/2 – 1-1/2 Class 300 Weld SS, ASTM A182-F316/316L
THRD Lateral Pipet 03 1/2 – 2 Class 300 Weld SS, ASTM A182-F316/316L
SW Elbow Pipet 1/2 – 1-1/2 Class 300 Weld SS, ASTM A182-F316/316L
THRD Elbow Pipet 03 1/2 – 2 Class 300 Weld SS, ASTM A182-F316/316L
90 ELL 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
45 ELL 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
Tee 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
Tee (RED) 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
Plug 03 1/2 – 2 THRD SS, ASTM A182-F316/316L, round head, ASME B16.11
Coupling 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
Coupling (RED) 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
Coupling 03 1/2 – 2 Class 3000 THRD SS, ASTM A182-F316/316L, ASME B16.11
Coupling (RED) 03 1/2 – 2 Class 3000 THRD SS, ASTM A182-F316/316L, ASME B16.11
Cap 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, ASME B16.11
Cap 03 1/2 – 2 Class 3000 THRD SS, ASTM A182-F316/316L, ASME B16.11
Reducing Insert 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, MSS SP-79
Union (GJ) 1/2 – 1-1/2 Class 3000 SW SS, ASTM A182-F316/316L, integral seat, MSS SP-83
Reducer (CONC) 2 – 24 Weld SS, ASTM A403-WP 316-W/316L-W, ASME B16.9
Reducer (ECC) 2 – 24 Weld SS, ASTM A403-WP 316-W/316L-W, ASME B16.9
BW Pipet 81 2 – 20 Weld SS, ASTM A182-F316/316L
90 LR ELL 2 – 24 Weld SS, ASTM A403-WP 316-W/316L-W, ASME B16.9
45 LR ELL 2 – 24 Weld SS, ASTM A403-WP 316-W/316L-W, ASME B16.9
Tee 2 – 24 Weld SS, ASTM A403-WP 316-W/316L-W, ASME B16.9
Cap 2 – 24 Weld SS, ASTM A403-WP 316-S/316L-S, ASME B16.9
Stub End LJ 2 – 24 Weld SS, ASTM A403-WP 316-W/316L-W, ASME B16.9, short pattern

Process Industry Practices Page 1 of 3

PIP PN03SD0S02 COMPLETE REVISION
Piping Material Specification Line Class 3SD0S02 October 2006

ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION USER CODE

VALVES
Gate 1/2 – 2 Class 300 SW 316L SS body w/ 316 SS trim GA03SU300
Gate 06 1/2 – 2 Class 300 T/SW 316L SS body w/ 316 SS trim GA03SU200
Gate 1/2 - 2 Class 800 T/SW 316L SS ext body w/316 SS trim GA08SU201
Gate 1/2 – 24 Class 300 RF 316 SS body w/ 316 SS trim, FP GA03ST500
Globe 1/2 – 2 Class 300 SW 316L SS body w/ 316 SS trim GL03SU300
Globe 3 – 12 Class 300 RF 316 SS body w/ 316 SS trim GL03ST501
Lift Check 61 1/2 – 2 Class 300 SW 316L SS body w/ 316 SS trim, piston CL03SU300
Wafer Dual PLT 07, 26, 63 3 – 24 Class 300 316 SS body w/ 316 SS disc/ST CD03ST700
Check
Swing Check 62 3 – 24 Class 300 RF 316 SS body w/ 316 SS trim CS03ST500
Ball 09 1/2 – 2 Class 300 SW 316L SS body w/ 316 SS trim, RTFE ST BA03SU301
Ball 09 3–4 Class 300 RF 316 SS body w/ 316 SS trim, RTFE ST BA03ST522
Ball 08 6 – 10 Class 300 RF 316 SS body w/ 316 SS trim, RTFE ST BA03ST524
Ball 08, 09 3–4 Class 300 RF 316 SS body w/ 316 SS trim, RTFE ST, FP BA03ST521
Ball 08, 09 6–8 Class 300 RF 316 SS body w/ 316 SS trim, RTFE ST, GO, FP BA03ST523
Ball 09 12 – 24 Class 300 RF 316 SS body w/ 316 SS trim, RTFE ST, GO BA03ST519
Ball 08, 09 10 – 24 Class 300 RF 316 SS body w/ 316 SS trim, RTFE ST, GO, FP BA03ST520
Ball 06, 09 1/2 – 2 Class 300 T/SW 316L SS body w/ 316 SS trim, RTFE ST BA03SU201
Wafer Butterfly 07, 09 2–3 Class 300 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST BF03ST705
Wafer Butterfly 07, 09 4 – 24 Class 300 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF03ST706
Lug Butterfly 07, 09, 26 2–3 Class 300 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST BF03ST707
Lug Butterfly 07, 09, 26 4 – 24 Class 300 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF03ST708
Lug Butterfly 07, 09, 26 30 – 48 Class 300 316 SS body w/ 316 SS trim, 316 SS/RPTFE ST, GO BF03ST709
FLANGES 02
Socket Weld 1/2 – 1-1/2 Class 300 RF SS, ASTM A182-F316/316L, ASME B16.5
Blind 1/2 – 24 Class 300 RF SS, ASTM A182-F316/316L, ASME B16.5
Lap Joint 2 – 24 Class 300 CS, ASTM A105, ASME B16.5
Pair WN Orifice 2 – 24 Class 300 RF SS, ASTM A182-F316/316L, ASME B16.36, SW taps
GASKETS
1/2 – 24 Class 300 1/16" thick filled or reinforced PTFE, ASME B16.21
BOLTING
Stud Bolts ASTM A193, Gr B7 stud w/ 2 heavy hex nuts ASTM A194, Gr 2H

90° BRANCH CONNECTION

Legend and Chart

24 T
20 D T
18 D C T
16 D C A T
14 D C A P T
12 D C A P P T
BRANCH SIZE

10 P C A P P P T
8 P P P P P P P T
6 P P P P P P P P T
4 P P P P P P P P P T
3 P P P P P P P P P P T
2 P P P P P P P P P P P T
1-1/2 S S S S S S S S S S S S T
1 S S S S S S S S S S S S E T
3/4 S S S S S S S S S S S S E E T
1/2 S S S S S S S S S S S S E E E T
24 20 18 16 14 12 10 8 6 4 3 2 1-1/2 1 3/4 1/2
HEADER SIZE

A 0.180" (Note 59)

C 0.200" (Note 59)
D 0.240" (Note 59)
E Reducing Tee
P Branch Weld w/ Reinforcing Pad (Pad thickness equals run pipe thickness. Pad width equals 1/2 branch OD.)
S SW Pipet
T Tee
W BW Pipet (Note 81)

Page 2 of 3 Process Industry Practices

COMPLETE REVISION PIP PN03SD0S02
October 2006 Piping Material Specification Line Class 3SD0S02

NOTES:
01 If a pipe schedule is shown under "SCH/RAT," it shall be adequate for the full flange rating. If "CALC" is shown, the pressure limit may be lower than full
flange rating.
02 All butt-welded component thicknesses shall match the pipe thickness.
03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment.
06 These valves shall be used only for vent, drain, and instrument connections.
07 These valves have no flanges but are installed between line flanges with extra-length bolts.
08 Full-port valves shall be used if indicated on the P&ID.
09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature
restrictions shall be consulted.
21 Sch 40S pipe and pipe nipples shall be used for threaded connections for sizes NPS 1 through NPS 2.
26 These check valves shall be used only if indicated on the P&ID.
59 Branch weld shall be used with reinforcement pad if the minimum wall thickness (specified or measured) of the header at the branch location exceeds xxx
where xxx equals the wall thickness value for the letter symbol shown in the legend. Full encirclement reinforcement (length equals twice branch pipe OD)
shall be used if the wall is less than or equal to xxx.
61 These check valves shall be installed in a horizontal position with cover up.
62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow.
63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow.
81 Integrally reinforced branch connections, tees, and reducing tees are permitted as an acceptable alternative branch connection.

REFERENCES:
Process Industry Practices (PIP)
PIP PNF0200 - Vents, Drains, and Instrument Connection Details
PIP PNSMV023 - Stainless Steel Gate Valve Descriptions
PIP PNSMV024 - Stainless Steel Globe Valve Descriptions
PIP PNSMV025 - Stainless Steel Check Valve Descriptions
PIP PNSMV026 - Stainless Steel Ball Valve Descriptions

Process Industry Practices Page 3 of 3