Scribd
Upload
284 views33 pages

Caterpillar 287b - Multi Terrain Loader - Service Manual - Repair PDF

The document is a manual for the 287B Multi Terrain Loader, detailing procedures for disassembly and assembly, specifically focusing on the air cleaner and alternator. It includes step-by-step instructions for removal and installation, along with references to other manuals for additional information. The publication is part of a series covering the 267B, 277B, and 287B models, powered by a 3044C engine.

Uploaded by

Heavy-equipmentmanual
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
284 views33 pages

Caterpillar 287b - Multi Terrain Loader - Service Manual - Repair PDF

The document is a manual for the 287B Multi Terrain Loader, detailing procedures for disassembly and assembly, specifically focusing on the air cleaner and alternator. It includes step-by-step instructions for removal and installation, along with references to other manuals for additional information. The publication is part of a series covering the 267B, 277B, and 287B models, powered by a 3044C engine.

Uploaded by

Heavy-equipmentmanual
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 33

287B MULTI TERRAIN LOADER

Printed by Heavy Equipment Manuals Printed in U.S.A


v2.20

Heavy Equipment Manuals


This is the sample of the sample click on
the download link for complete manual

DOWNLOAD LINK

For some reason if link demos not work


download this pdf and then click

 
 

 

 

 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 




Product: MULTI TERRAIN LOADER


Model: 287B MULTI TERRAIN LOADER ZSA
Configuration: 267B 277B 287B Multi Terrain Loader ZSA00001-UP (MACHINE) POWERED BY 3044C Engi ne

Disassembly and Assembly


267B, 277B and 287B Multi Terrain Loaders Engine Supplement
Media Number -RENR4883-01 Publication Date -01/11/2009 Date Updated -17/11/2009

i02049815

Air Cleaner - Remove and Install


SMCS - 1051-010

Removal Procedure
1. Tilt the radiator. Refer to Operation and Maintenance Manual, "Radiator Tilting".
Illustration 1 g01038364

2. Disconnect harness assembly (1) .


Illustration 2 g01038365

3. Release clamps (2). Remove cover (3) for the air cleaner.
Illustration 3 g01038368

Illustration 4 g01038369

4. Remove primary air cleaner (4) and secondary air cleaner (5) .
Illustration 5 g01038372

5. Remove bolt (6) and move fuse (7) out of the way.
Illustration 6 g01038385

6. Loosen clamp (8) and disconnect hose (9). Remove bolts (10) and remove air cleaner housing (11) .

Installation Procedure

Illustration 7 g01038385

1. Install air cleaner housing (11) and install bolts (10). Connect hose (9) and tighten clamp (8) .
Illustration 8 g01038372

2. Move fuse (7) into position and install bolt (6) .


Illustration 9 g01038369

Illustration 10 g01038368

3. Install secondary air cleaner (5) and install primary air cleaner (4) .
Illustration 11 g01038365

4. Install cover (3) for the air cleaner. Secure clamps (2) .
Illustration 12 g01038364

5. Connect harness assembly (1) .

6. Tilt the radiator back to the original position. Refer to Operation and Maintenance Manual, "Radiator
Tilting".

Copyright 1993 - 2020 Caterpillar Inc. Sat Jul 11 10:52:40 UTC+0530 2020
All Rights Reserved.
Private Network For SIS Licensees.




Product: MULTI TERRAIN LOADER


Model: 287B MULTI TERRAIN LOADER ZSA
Configuration: 267B 277B 287B Multi Terrain Loader ZSA00001-UP (MACHINE) POWERED BY 3044C Engi ne

Disassembly and Assembly


267B, 277B and 287B Multi Terrain Loaders Engine Supplement
Media Number -RENR4883-01 Publication Date -01/11/2009 Date Updated -17/11/2009

i02045531

Alternator - Remove and Install


SMCS - 1405-010

Removal Procedure
Start By:

A. Disconnect the battery. Refer to Disassembly and Assembly, "Battery and Battery Cable - Separate and
Connect".

Note: The muffler has been removed for clarity.


This is the sample of the sample click on
the download link for complete manual

DOWNLOAD LINK

For some reason if link demos not work


download this pdf and then click
Illustration 1 g01050334

1. Remove bolts (1) and remove cover (2) .


Illustration 2 g01038433

2. Disconnect harness assembly (3). Raise the boot and disconnect harness assembly (4) .
Illustration 3 g01038438

3. Loosen bolts (5) and (8). Remove belt (6) and remove alternator (7) .

Installation Procedure
Illustration 4 g01038438

1. Install alternator (7). Install belt (6). Refer to Operation and Maintenance Manual, "Belt -
Inspect/Adjust/Replace" for more information. Tighten bolts (5) and (8) .
Illustration 5 g01038433

2. Connect harness assembly (3). Raise the boot and connect harness assembly (4) .
Illustration 6 g01050334

3. Install cover (2) and install bolts (1) .

End By: Connect the battery. Refer to Disassembly and Assembly, "Battery and Battery Cable - Separate
and Connect".

Copyright 1993 - 2020 Caterpillar Inc. Sat Jul 11 10:50:23 UTC+0530 2020
All Rights Reserved.
Private Network For SIS Licensees.




Product: MULTI TERRAIN LOADER


Model: 287B MULTI TERRAIN LOADER ZSA
Configuration: 267B 277B 287B Multi Terrain Loader ZSA00001-UP (MACHINE) POWERED BY 3044C Engi ne

Disassembly and Assembly


267B, 277B and 287B Multi Terrain Loaders Engine Supplement
Media Number -RENR4883-01 Publication Date -01/11/2009 Date Updated -17/11/2009

i02045347

Battery and Battery Cable - Separate and Connect


SMCS - 1401-029-KA

Removal Procedure
1. disconnect negative battery cable (4) .

2. Disconnect positive battery cable (1) .


Illustration 1 g01041274

3. Remove battery (5) and remove clamp (3). Remove bolts (2) and (6) .

Installation Procedure
Illustration 2 g01041274

1. Install battery (5) and install clamp (3). Install bolts (2) and (6) .

2. Connect positive battery cable (1) .

3. Connect negative battery cable (4) .

Copyright 1993 - 2020 Caterpillar Inc. Sat Jul 11 10:50:10 UTC+0530 2020
All Rights Reserved.
Private Network For SIS Licensees.




Product: MULTI TERRAIN LOADER


Model: 287B MULTI TERRAIN LOADER ZSA
Configuration: 267B 277B 287B Multi Terrain Loader ZSA00001-UP (MACHINE) POWERED BY 3044C Engi ne

Disassembly and Assembly


267B, 277B and 287B Multi Terrain Loaders Engine Supplement
Media Number -RENR4883-01 Publication Date -01/11/2009 Date Updated -17/11/2009

i02046831

Cab - Tilt
SMCS - 7301-084

Procedure to Tilt the Cab


Start By:

A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System
Pressure - Release".

Do not go beneath cab unless cab is empty and support lever is engaged.

Failure to follow the instructions or heed the warnings could result in


injury or death.

Note: Empty the water tank (if equipped) before you tilt the cab.
Illustration 1 g01049069

1. Loosen bolt (1) .

Note: Bolt (1) will be retained in the cab.


Illustration 2 g01049070

2. Remove nut (2) and large washer (3) from the inside of the cab.

3. Repeat Steps 1 and 2 on the opposite side of the cab.


Illustration 3 g01049074

4. Raise cab (4) .


Illustration 4 g00563598

5. Engage cab support lever (5) .

Lower Procedure

Illustration 5 g01049074
Illustration 6 g00563674

1. Tilt the cab upward.

2. Disengage cab support lever (5) .

3. Lower cab (4) .


Illustration 7 g01049069

4. Align bolt (1) .


This is the sample of the sample click on
the download link for complete manual

DOWNLOAD LINK

For some reason if link demos not work


download this pdf and then click

You might also like