Whirlpool EMEA

SERVICE Customer Services

WIO3T133DLES

Service Information
DISHWASHERS DISH-WASHERS
WIO3T133DLES
7699 910 54194
Last Modification: 18/06/21
Creation Date: 15/01/19

Spare Part List 2

Exploded View 6

Wiring Diagram 9

Indesit Service Bulletin 10

Indesit Service Manuals 18

This document is only intended for qualified technicans who are aware of the
respective safety regulations.
Subject to modifications

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 2 of 23

Spare Part List

Pos 12NC Description

A001 4820 000 21980 SUPPORT

A001 4820 000 32181 SUPPORT REAR CROSS BEAM EPS 60 PLP2
A002 4880 004 81003 SOUNDPROOFING SX+DX+TOP PLP2 60CM
A003 4820 000 21990 COVER FIX (SX) LH
A004 4880 005 14081 DOOR SPRING ADJUSTER
A004 4820 000 40479 DOOR SPRING ADJUSTER LUCE FINE CICLO
A005 4820 000 21979 SIDE PANEL LEFT
A006 4820 000 22207 RADIO INTERFERENCE SUPPRESSOR PLP2
A006 4820 000 21978 COVER FILTER DEA700 HANNING
A006 4880 005 14073 RADIO INTERFERENCE SUPPRESSOR DEA70x
A007 4880 005 00652 BASE + FEET 60CM BU PD
A008 4820 000 21970 REAR FOOT ADJUSTMENT ROD
A009 4820 000 87504 TRAY ON BOTTOM OF TUB 60CM
A010 4820 000 21968 FOOT
A011 4820 000 21969 REAR FOOT ADJUSTMENT ASSEMBLY
A012 4880 003 86602 RAIL FRONT STOP SLIM DARK GREY PLP2
A013 4880 003 87161 RUNNER SUPPORT UPPER BASKET
A013 4880 003 87159 FIXING PLATE FOR RUNNER SUPPORT
A014 4820 000 21974 BASKET RUNNER - UPPER EOS
A015 4880 003 86600 RAIL BACK STOP DARK GREY WHP
A016 4820 000 21975 PANEL LATERAL RIGHT
A017 4820 000 91621 THIS ITEM IS NOT FITTED TO THIS MODEL
A018 4820 000 32549 DOOR SEAL - TOP AND SIDES 60CM
A019 4820 000 21991 COVER FIX (DX) RH
A020 4820 000 21982 CATCH PLATE NEW
A021 4880 003 01202 FIX RING RAIL SUPPORT THIRD BASKET
A021 4880 004 80786 BASKET RUNNER - UPPER PLP2LEFT
A021 4880 004 80788 BASKET RUNNER - UPPER PLP2 RIGHT
A021 4880 005 02278 RAIL SUPPORT ASSEMBLY LEFT THIRD BASKET
A021 4880 005 02279 RAIL SUPPORT ASSEMBLY RIGHT THIRD BASKET
A022 4880 003 86605 LOWER BASKET WHEEL
A022 4880 003 86604 BASKET WHEEL AXIS
A023 4880 003 86607 CUTLERY BASKET MEDIUM - BASIC
A024 4880 003 86609 FLAP GREY PLP2
A024 4880 003 86610 TRACK FLAP 60 PLP2
A025 4880 005 33262 BASKET HIGHT LIFT UP RH BASIC RED DG
A025 4880 005 33261 BASKET HIGHT LIFT UP LEFT BASIC RED DG
A025 4880 003 86615 BASKET HIGHT RIGHT BASIC PLP2
A025 4880 003 86613 BASKET HIGHT LEFT BACIC PLP2
A026 4880 006 30891 UPPER BASKET FIX,60,DG IEC
A026 4880 005 42616 GLASS WIRE SUPPORT - UPPER BASKET
A026 4880 005 38227 UPPER BASKET FIX,60,DG
A026 4880 003 86608 UPPER BASKET BASIC PLP2
A027 4880 004 80616 HANDLE WITH INOX INSERT 60
A028 4880 006 30895 RIGHT LONG FLAP DARK GRAY IEC
A028 4880 006 30893 LEFT LONG FLAP DARK GRAY IEC
A028 4880 006 24896 COMBS FIXING CLIP - LOWER BASKET DKG
A028 4880 006 24895 COMBS FIXING CLIP - LOWER BASKET DKG
A028 4880 005 02297 RIGHT LONG FLAP SILVER GRAY
A028 4880 005 02296 LEFT LONG FLAP SILVER GRAY

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 3 of 23

Pos 12NC Description

A028 4880 005 02282 COMBS FIXING CLIP - LOWER BASKET SILVER
A029 4880 006 30902 LEFT SHORT FLAP ,DARK GRAY ,IEC
A029 4880 006 30899 RIGHT SHORT FLAP DARK GRAY IEC
A029 4880 005 02298 RIGHT SHORT FLAP SILVER GRAY
A029 4880 005 02295 LEFT SHORT FLAP SILVER GRAY
A030 4880 005 02281 LOWER BASKET MEDIUM 60CM
A030 4880 005 42963 LOWER BASKET MEDIUM,60,ASSY,DG
A030 4880 006 30892 LOWER BASKET MEDIUM,60,ASSY,DG IEC
A031 4880 005 34528 THIRD BASKET RAIL GUIDE ASSEMBLY ASS
A031 4880 004 80946 TRAY HOOK 3-RD BASKET
A031 4880 004 80944 THIRD BASKET RAIL GUIDE ASSEMBLY ASS
A032 4880 004 80943 UPPER CUTLERY BASKET SIDE.
A033 4880 004 80789 UPPER CUTLERY BASKET CENTR. GR
A033 4880 005 38439 UPPER CUTLERY BASKET CENTR. GR
A034 4880 003 87779 POWER CLEAN CROCODILE (RED COLOR)
A035 4880 006 64679 POWER CLEAN PAN HANGER ASSY,DKG,EER,60CM
A035 4880 005 66583 POWER CLEAN PAN HANGER (DARK GREY & RED)
A035 4880 003 87784 POWER CLEAN PAN HANGER (DARK GREY & RED)
A036 4880 004 84402 HANDLE WITH INOX INSERT 60
A099 4820 000 21994 FIXING HOLE PLUG
A099 4820 000 21993 BASKET BUFFER
A099 4820 000 21989 SERIAL PORT COVER
A099 4820 000 93040 LOWER BASKET BUFFER EVO3
B001 4880 003 87773 POWER CLEAN BODY (DARK GREY & RED COLOR)
B002 4880 002 98006 FIXING RING ASSEMBLY
B003 4880 005 02280 UPPER SPRINKLER KIT PLP2
B004 4880 004 80701 SHOWER TOGETHER WITH CONDUCT C
B005 4880 003 87520 RACK GUIDE CASING C
B006 4880 003 86511 UPPER WASH ARM FEED PIPE
B006 4880 005 25300 UPPER WASH ARM FEED PIPE
B007 4880 003 86499 SET UPPER WASH ARM PLP2
B008 4880 003 86505 RING NUT OF UPPER WASH ARM
B009 4880 003 87524 LOWER SPRAY ARM
B010 4880 003 87515 SUPPORT - LOWER WASH ARM BUSH DARK GREY
B011 4880 003 86682 ASS. SHORT MICROFILTER DARK IKEA GREY
B013 4820 000 89344 OUTLET FILTER STAINLESS INOX PLP2
B014 4820 000 22007 WATER CHANNELER
B015 4820 000 22010 FLAP FOR SET SUMP
B016 4820 000 32666 TURBIDITY SENSOR NTC MARQUARDT
B017 4820 000 23392 DRAIN PUMP BLAC 50 HZ COPRECI
B018 4820 000 89338 SET SUMP 3OUT PLP2 + GASKET
B019 4820 000 22013 FLOAT - OVERFLOW UNIT 45CM
B020 4820 000 22012 DRAIN HOSE 45-60CM 1750MM
B021 4820 000 22216 WASH MOT/PUMP BLAC9/6 50Hz 220/240V+SEAL
B022 4820 000 22217 HEATING BLDC9/6 + SEAL
B023 4820 000 22017 PIPE SUMP-WASH MOTOR
B024 4820 000 89336 PIPE WASH MOTOR-MOTOR WASHING ALTERN.
B025 4880 003 86861 MOTOR WASHING ALTERNATING 3OUT PS9
B026 4820 000 89379 SEAL O-RING 20 X 3mm BLUE qty 1 pr pack
B027 4820 000 30450 TUBE - SOFTENER/SUMP 170MM EOS

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 4 of 23

Pos 12NC Description

B028 4820 000 22022 AIR BREAK + TURBINE

B029 4880 003 86598 RING-NUT FOR AIR-FLOW BODY
B030 4880 003 86530 WATER SOFTENER
B031 4820 000 22025 SEAL - SOFTENER/WASH CHAMBER
B032 4880 003 86533 RETAINING RING - SOFTENER DARK GREY WHP
B033 4880 003 86599 SALT CAP
B034 4820 000 22028 SALT FUNNEL
B035 4820 000 23524 INLET HOSE LONG WATERSTOP 1640MM
B035 4880 005 13408 CONNECTOR HOUSING
B036 4820 000 31300 HOSE SUPPORT 45-60CM
B037 4880 005 14072 POWER CORD EU PLUG WITH FERRITE
B037 4820 000 22211 EARTH WIRE SPRING
B037 4820 000 22210 SUPPLY CABLE EU PLP2
B038 4820 000 91621 THIS ITEM IS NOT FITTED TO THIS MODEL
B039 4820 000 91621 THIS ITEM IS NOT FITTED TO THIS MODEL
B040 4880 004 84559 HOUSING ASSEMBLY POWER DRY
B040 4880 006 10390 HOUSING ASSEMBLY POWER DRY
B041 4880 004 80996 CAP CORNER FOR TURBO-DRY EVO3
B042 4880 004 84561 TURBO CONDENSER POWER DRY
B043 4880 004 84563 CLAMP RING ON EXTERNAL CONDENSER
B044 4880 004 95818 GATE OPENING ASSEMBLY CLD PLP2
B044 4880 004 95819 PLUG
B045 4880 006 10391 O-Ring
B046 4880 005 13632 AIR INLET DUCT ASSEMBLY
B099 4820 000 22220 HOSE CLAMP D=18.5
B099 4820 000 22039 TIE L=276
B099 4820 000 22037 HOSE CLAMP D=38,1 PIPE SYNCR.MOT/WASH AR
B099 4820 000 22036 HOSE CLAMP D=45,5 PIPE SUMP/MOTOR PUMP
B099 4820 000 22035 CABLE CLAMP HOSE
B099 4820 000 22034 HOSE CLAMP D=14,9
C001 4880 005 11035 DOOR SOUNDPROOFING SLIDING FD 60
C001 4880 003 86638 INNER DOOR PANEL STAINLESS 60 PLP2+DISP
C001 4820 000 32141 DOOR INSULATION MATRESS 2MM PLP2 60CM
C002 4820 000 22042 MICROSWITCH
C003 4820 000 23245 LOCKING ASSEMBLY DEA602 NEW 60CM
C003 4880 005 13644 LOCKING ASSEMBLY LONG DISTANCE
C004 4880 003 86694 FORM DISPENSER / DOOR
C004 4880 003 86697 WIRING MODULE EARTH DOOR HINGE WHR
C004 4880 005 02300 WIRING POWER DRY VENT
C004 4880 005 02301 WIRING POWER DRY WAX
C004 4880 005 05638 WIRING MUDULO DEA 701 POWER SUPPLY
C004 4880 005 25427 WIRING VSM WASH W/O FERRITE VSM DRAIN
C004 4880 002 98179 WIRING DEA700 ALTERNATO ITW
C004 4820 000 22225 WIRING MODULE EARTH
C004 4880 002 98018 WIRING DEA700 RINSE
C004 4820 000 22046 WIRING SALT CARD-SOFTENER
C004 4820 000 22222 WIRING DEA700 EV1/EV2
C004 4820 000 88736 WIRING DEA700 TURBINE-TRAY
C004 4820 000 22224 WIRING DEA700 TURBIDITY SENSOR/NTC
C004 4880 002 98014 WIRING MOTOR/PS ALL BLAC

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 5 of 23

Pos 12NC Description

C004 4820 000 22047 WIRING MODULO SERIALE PLP2 SX

C005 4880 004 80622 INTERFACE FI DIGIT5 7B OPTIMAL
C005 4880 005 50558 INTERFACE FI C+ WHT DGT 7B INX D MZ T PC
C006 4880 005 11664 FRONTALINO SERIGRAFATO WIO3T133DLES
C007 4880 006 30365 OUTER DOOR 60CM SLIDING
C007 4880 005 11006 OUTER DOOR 60CM SLIDING
C008 4880 005 11031 SLIDING HINGE RIGHT
C008 4880 006 33078 SLIDING HINGE RIGHT
C009 4820 000 85097 HINGE WIRE 60CM EOS
C010 4880 005 11033 SLIDING HINGE LEFT
C010 4880 006 33077 SLIDING HINGE LEFT
C011 4880 005 26506 TIMER DEA701 FULL LITT RINSE
C012 4880 002 72306 SMART READER FOR CARD 8KB 32KB + HOOD
C013 4880 005 34466 CARD W66-OP-4-FD-3R 32KB 400011236713
C014 4880 005 11002 2V LIGHT ON THE FLOOR, ORANGE
C015 4880 005 11028 LATH COVER-DOOR,SIDE
C016 4880 005 11027 INSTALLATION KIT SLIDING HINGE
C016 4880 005 19960 INSTALLATION KIT SLIDING HINGE
C016 4880 006 25776 INSTALLATION KIT SLIDING HINGE
C016 4880 006 40530 INSTALLATION KIT SLIDING HINGE
C017 4880 006 32470 DOOR BRACKET
C017 4880 005 20454 KIT FOR DECOR PANEL from 10 to14 kg
C017 4880 005 11037 DOOR BRACKET
C099 4880 005 38473 DOOR POSITIONING JIG
C099 4880 005 20479 A SET OF SCREWS FOR DOORS 12-16mm
C099 4880 003 73185 TANK BOTTOM BORDER STRIP
C099 4820 000 23787 SCREW
C099 4820 000 89596 TANK BORDER TOP STRIP PLP2 60
C099 4820 000 22064 FIXING BOLT INNER/OUTER DOOR EOS
C099 4820 000 22063 HINGE SCREW M5X14 TSP 6L-T20 90G
C099 4820 000 32668 PLUG FRONT PANEL SOUNDPROOFING
C099 4820 000 22062 FIXING BOLT INNER DOOR/DASHBOARD
C099 4820 000 22061 SELF-TAPPING SCREW T1/2T
C099 4880 005 64429 CROSSBAR IN POLYURETHANE FOAM 60CM

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 6 of 23

Exploded View

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 7 of 23

Exploded View

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 8 of 23

Exploded View

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 9 of 23

Wiring Diagram

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 10 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water/ steam leaking from door seal

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb31233.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 11 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rinse Aid alarm does not go off

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb65486.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 12 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dish 60cm Tub gasket removed by Lower Basket

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84244.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 13 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISH WATER SOFTENER FAULTY PCB

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb80465.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 14 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dish 60cm Lower basket falling down from track

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84651.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 15 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3RD blocks itself due to the hard working of wheels

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84890.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 16 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F15 error code - the root cause proper recognition and solving procedure

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84892.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 17 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Error Code F01 - Water Leakage into the Base – Checking for Leaks

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb86507.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 18 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SQG_DW_13/7_EN_ALARM TABLE “EOS” (DEA 601/DEA 602/DEA 700)

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm59718.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 19 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation document - Sliding Door PLP2

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64380.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 20 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INSTRUCTION SHEET DIMA SLIDING

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64630.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 21 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SLIDING HINGE 2017 Presentation

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64860.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 22 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Model Line 2017

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64864.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 23 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New product label format (Servicenet, WeDoc, Memwriter, ESAM)

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm70109.pdf

© Whirlpool EMEA www.scc-service.com

 Whirlpool EMEA
SERVICE Customer Services
WIO3T133DLES

Service Information
DISHWASHERS DISH-WASHERS
WIO3T133DLES
7699 910 54194
Last Modification: 18/06/21
Creation Date: 15/01/19

Spare Part List 2

Exploded View 6

Wiring Diagram 9

Indesit Service Bulletin 10

Indesit Service Manuals 18

This document is only intended for qualified technicans who are aware of the
respective safety regulations.
Subject to modifications

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 2 of 23

Spare Part List

Pos 12NC Description

A001 4820 000 21980 SUPPORT

A001 4820 000 32181 SUPPORT REAR CROSS BEAM EPS 60 PLP2
A002 4880 004 81003 SOUNDPROOFING SX+DX+TOP PLP2 60CM
A003 4820 000 21990 COVER FIX (SX) LH
A004 4880 005 14081 DOOR SPRING ADJUSTER
A004 4820 000 40479 DOOR SPRING ADJUSTER LUCE FINE CICLO
A005 4820 000 21979 SIDE PANEL LEFT
A006 4820 000 22207 RADIO INTERFERENCE SUPPRESSOR PLP2
A006 4820 000 21978 COVER FILTER DEA700 HANNING
A006 4880 005 14073 RADIO INTERFERENCE SUPPRESSOR DEA70x
A007 4880 005 00652 BASE + FEET 60CM BU PD
A008 4820 000 21970 REAR FOOT ADJUSTMENT ROD
A009 4820 000 87504 TRAY ON BOTTOM OF TUB 60CM
A010 4820 000 21968 FOOT
A011 4820 000 21969 REAR FOOT ADJUSTMENT ASSEMBLY
A012 4880 003 86602 RAIL FRONT STOP SLIM DARK GREY PLP2
A013 4880 003 87161 RUNNER SUPPORT UPPER BASKET
A013 4880 003 87159 FIXING PLATE FOR RUNNER SUPPORT
A014 4820 000 21974 BASKET RUNNER - UPPER EOS
A015 4880 003 86600 RAIL BACK STOP DARK GREY WHP
A016 4820 000 21975 PANEL LATERAL RIGHT
A017 4820 000 91621 THIS ITEM IS NOT FITTED TO THIS MODEL
A018 4820 000 32549 DOOR SEAL - TOP AND SIDES 60CM
A019 4820 000 21991 COVER FIX (DX) RH
A020 4820 000 21982 CATCH PLATE NEW
A021 4880 003 01202 FIX RING RAIL SUPPORT THIRD BASKET
A021 4880 004 80786 BASKET RUNNER - UPPER PLP2LEFT
A021 4880 004 80788 BASKET RUNNER - UPPER PLP2 RIGHT
A021 4880 005 02278 RAIL SUPPORT ASSEMBLY LEFT THIRD BASKET
A021 4880 005 02279 RAIL SUPPORT ASSEMBLY RIGHT THIRD BASKET
A022 4880 003 86605 LOWER BASKET WHEEL
A022 4880 003 86604 BASKET WHEEL AXIS
A023 4880 003 86607 CUTLERY BASKET MEDIUM - BASIC
A024 4880 003 86609 FLAP GREY PLP2
A024 4880 003 86610 TRACK FLAP 60 PLP2
A025 4880 005 33262 BASKET HIGHT LIFT UP RH BASIC RED DG
A025 4880 005 33261 BASKET HIGHT LIFT UP LEFT BASIC RED DG
A025 4880 003 86615 BASKET HIGHT RIGHT BASIC PLP2
A025 4880 003 86613 BASKET HIGHT LEFT BACIC PLP2
A026 4880 006 30891 UPPER BASKET FIX,60,DG IEC
A026 4880 005 42616 GLASS WIRE SUPPORT - UPPER BASKET
A026 4880 005 38227 UPPER BASKET FIX,60,DG
A026 4880 003 86608 UPPER BASKET BASIC PLP2
A027 4880 004 80616 HANDLE WITH INOX INSERT 60
A028 4880 006 30895 RIGHT LONG FLAP DARK GRAY IEC
A028 4880 006 30893 LEFT LONG FLAP DARK GRAY IEC
A028 4880 006 24896 COMBS FIXING CLIP - LOWER BASKET DKG
A028 4880 006 24895 COMBS FIXING CLIP - LOWER BASKET DKG
A028 4880 005 02297 RIGHT LONG FLAP SILVER GRAY
A028 4880 005 02296 LEFT LONG FLAP SILVER GRAY

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 3 of 23

Pos 12NC Description

A028 4880 005 02282 COMBS FIXING CLIP - LOWER BASKET SILVER
A029 4880 006 30902 LEFT SHORT FLAP ,DARK GRAY ,IEC
A029 4880 006 30899 RIGHT SHORT FLAP DARK GRAY IEC
A029 4880 005 02298 RIGHT SHORT FLAP SILVER GRAY
A029 4880 005 02295 LEFT SHORT FLAP SILVER GRAY
A030 4880 005 02281 LOWER BASKET MEDIUM 60CM
A030 4880 005 42963 LOWER BASKET MEDIUM,60,ASSY,DG
A030 4880 006 30892 LOWER BASKET MEDIUM,60,ASSY,DG IEC
A031 4880 005 34528 THIRD BASKET RAIL GUIDE ASSEMBLY ASS
A031 4880 004 80946 TRAY HOOK 3-RD BASKET
A031 4880 004 80944 THIRD BASKET RAIL GUIDE ASSEMBLY ASS
A032 4880 004 80943 UPPER CUTLERY BASKET SIDE.
A033 4880 004 80789 UPPER CUTLERY BASKET CENTR. GR
A033 4880 005 38439 UPPER CUTLERY BASKET CENTR. GR
A034 4880 003 87779 POWER CLEAN CROCODILE (RED COLOR)
A035 4880 006 64679 POWER CLEAN PAN HANGER ASSY,DKG,EER,60CM
A035 4880 005 66583 POWER CLEAN PAN HANGER (DARK GREY & RED)
A035 4880 003 87784 POWER CLEAN PAN HANGER (DARK GREY & RED)
A036 4880 004 84402 HANDLE WITH INOX INSERT 60
A099 4820 000 21994 FIXING HOLE PLUG
A099 4820 000 21993 BASKET BUFFER
A099 4820 000 21989 SERIAL PORT COVER
A099 4820 000 93040 LOWER BASKET BUFFER EVO3
B001 4880 003 87773 POWER CLEAN BODY (DARK GREY & RED COLOR)
B002 4880 002 98006 FIXING RING ASSEMBLY
B003 4880 005 02280 UPPER SPRINKLER KIT PLP2
B004 4880 004 80701 SHOWER TOGETHER WITH CONDUCT C
B005 4880 003 87520 RACK GUIDE CASING C
B006 4880 003 86511 UPPER WASH ARM FEED PIPE
B006 4880 005 25300 UPPER WASH ARM FEED PIPE
B007 4880 003 86499 SET UPPER WASH ARM PLP2
B008 4880 003 86505 RING NUT OF UPPER WASH ARM
B009 4880 003 87524 LOWER SPRAY ARM
B010 4880 003 87515 SUPPORT - LOWER WASH ARM BUSH DARK GREY
B011 4880 003 86682 ASS. SHORT MICROFILTER DARK IKEA GREY
B013 4820 000 89344 OUTLET FILTER STAINLESS INOX PLP2
B014 4820 000 22007 WATER CHANNELER
B015 4820 000 22010 FLAP FOR SET SUMP
B016 4820 000 32666 TURBIDITY SENSOR NTC MARQUARDT
B017 4820 000 23392 DRAIN PUMP BLAC 50 HZ COPRECI
B018 4820 000 89338 SET SUMP 3OUT PLP2 + GASKET
B019 4820 000 22013 FLOAT - OVERFLOW UNIT 45CM
B020 4820 000 22012 DRAIN HOSE 45-60CM 1750MM
B021 4820 000 22216 WASH MOT/PUMP BLAC9/6 50Hz 220/240V+SEAL
B022 4820 000 22217 HEATING BLDC9/6 + SEAL
B023 4820 000 22017 PIPE SUMP-WASH MOTOR
B024 4820 000 89336 PIPE WASH MOTOR-MOTOR WASHING ALTERN.
B025 4880 003 86861 MOTOR WASHING ALTERNATING 3OUT PS9
B026 4820 000 89379 SEAL O-RING 20 X 3mm BLUE qty 1 pr pack
B027 4820 000 30450 TUBE - SOFTENER/SUMP 170MM EOS

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 4 of 23

Pos 12NC Description

B028 4820 000 22022 AIR BREAK + TURBINE

B029 4880 003 86598 RING-NUT FOR AIR-FLOW BODY
B030 4880 003 86530 WATER SOFTENER
B031 4820 000 22025 SEAL - SOFTENER/WASH CHAMBER
B032 4880 003 86533 RETAINING RING - SOFTENER DARK GREY WHP
B033 4880 003 86599 SALT CAP
B034 4820 000 22028 SALT FUNNEL
B035 4820 000 23524 INLET HOSE LONG WATERSTOP 1640MM
B035 4880 005 13408 CONNECTOR HOUSING
B036 4820 000 31300 HOSE SUPPORT 45-60CM
B037 4880 005 14072 POWER CORD EU PLUG WITH FERRITE
B037 4820 000 22211 EARTH WIRE SPRING
B037 4820 000 22210 SUPPLY CABLE EU PLP2
B038 4820 000 91621 THIS ITEM IS NOT FITTED TO THIS MODEL
B039 4820 000 91621 THIS ITEM IS NOT FITTED TO THIS MODEL
B040 4880 004 84559 HOUSING ASSEMBLY POWER DRY
B040 4880 006 10390 HOUSING ASSEMBLY POWER DRY
B041 4880 004 80996 CAP CORNER FOR TURBO-DRY EVO3
B042 4880 004 84561 TURBO CONDENSER POWER DRY
B043 4880 004 84563 CLAMP RING ON EXTERNAL CONDENSER
B044 4880 004 95818 GATE OPENING ASSEMBLY CLD PLP2
B044 4880 004 95819 PLUG
B045 4880 006 10391 O-Ring
B046 4880 005 13632 AIR INLET DUCT ASSEMBLY
B099 4820 000 22220 HOSE CLAMP D=18.5
B099 4820 000 22039 TIE L=276
B099 4820 000 22037 HOSE CLAMP D=38,1 PIPE SYNCR.MOT/WASH AR
B099 4820 000 22036 HOSE CLAMP D=45,5 PIPE SUMP/MOTOR PUMP
B099 4820 000 22035 CABLE CLAMP HOSE
B099 4820 000 22034 HOSE CLAMP D=14,9
C001 4880 005 11035 DOOR SOUNDPROOFING SLIDING FD 60
C001 4880 003 86638 INNER DOOR PANEL STAINLESS 60 PLP2+DISP
C001 4820 000 32141 DOOR INSULATION MATRESS 2MM PLP2 60CM
C002 4820 000 22042 MICROSWITCH
C003 4820 000 23245 LOCKING ASSEMBLY DEA602 NEW 60CM
C003 4880 005 13644 LOCKING ASSEMBLY LONG DISTANCE
C004 4880 003 86694 FORM DISPENSER / DOOR
C004 4880 003 86697 WIRING MODULE EARTH DOOR HINGE WHR
C004 4880 005 02300 WIRING POWER DRY VENT
C004 4880 005 02301 WIRING POWER DRY WAX
C004 4880 005 05638 WIRING MUDULO DEA 701 POWER SUPPLY
C004 4880 005 25427 WIRING VSM WASH W/O FERRITE VSM DRAIN
C004 4880 002 98179 WIRING DEA700 ALTERNATO ITW
C004 4820 000 22225 WIRING MODULE EARTH
C004 4880 002 98018 WIRING DEA700 RINSE
C004 4820 000 22046 WIRING SALT CARD-SOFTENER
C004 4820 000 22222 WIRING DEA700 EV1/EV2
C004 4820 000 88736 WIRING DEA700 TURBINE-TRAY
C004 4820 000 22224 WIRING DEA700 TURBIDITY SENSOR/NTC
C004 4880 002 98014 WIRING MOTOR/PS ALL BLAC

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 5 of 23

Pos 12NC Description

C004 4820 000 22047 WIRING MODULO SERIALE PLP2 SX

C005 4880 004 80622 INTERFACE FI DIGIT5 7B OPTIMAL
C005 4880 005 50558 INTERFACE FI C+ WHT DGT 7B INX D MZ T PC
C006 4880 005 11664 FRONTALINO SERIGRAFATO WIO3T133DLES
C007 4880 006 30365 OUTER DOOR 60CM SLIDING
C007 4880 005 11006 OUTER DOOR 60CM SLIDING
C008 4880 005 11031 SLIDING HINGE RIGHT
C008 4880 006 33078 SLIDING HINGE RIGHT
C009 4820 000 85097 HINGE WIRE 60CM EOS
C010 4880 005 11033 SLIDING HINGE LEFT
C010 4880 006 33077 SLIDING HINGE LEFT
C011 4880 005 26506 TIMER DEA701 FULL LITT RINSE
C012 4880 002 72306 SMART READER FOR CARD 8KB 32KB + HOOD
C013 4880 005 34466 CARD W66-OP-4-FD-3R 32KB 400011236713
C014 4880 005 11002 2V LIGHT ON THE FLOOR, ORANGE
C015 4880 005 11028 LATH COVER-DOOR,SIDE
C016 4880 005 11027 INSTALLATION KIT SLIDING HINGE
C016 4880 005 19960 INSTALLATION KIT SLIDING HINGE
C016 4880 006 25776 INSTALLATION KIT SLIDING HINGE
C016 4880 006 40530 INSTALLATION KIT SLIDING HINGE
C017 4880 006 32470 DOOR BRACKET
C017 4880 005 20454 KIT FOR DECOR PANEL from 10 to14 kg
C017 4880 005 11037 DOOR BRACKET
C099 4880 005 38473 DOOR POSITIONING JIG
C099 4880 005 20479 A SET OF SCREWS FOR DOORS 12-16mm
C099 4880 003 73185 TANK BOTTOM BORDER STRIP
C099 4820 000 23787 SCREW
C099 4820 000 89596 TANK BORDER TOP STRIP PLP2 60
C099 4820 000 22064 FIXING BOLT INNER/OUTER DOOR EOS
C099 4820 000 22063 HINGE SCREW M5X14 TSP 6L-T20 90G
C099 4820 000 32668 PLUG FRONT PANEL SOUNDPROOFING
C099 4820 000 22062 FIXING BOLT INNER DOOR/DASHBOARD
C099 4820 000 22061 SELF-TAPPING SCREW T1/2T
C099 4880 005 64429 CROSSBAR IN POLYURETHANE FOAM 60CM

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 6 of 23

Exploded View

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 7 of 23

Exploded View

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 8 of 23

Exploded View

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 9 of 23

Wiring Diagram

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 10 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water/ steam leaking from door seal

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb31233.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 11 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rinse Aid alarm does not go off

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb65486.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 12 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dish 60cm Tub gasket removed by Lower Basket

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84244.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 13 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DISH WATER SOFTENER FAULTY PCB

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb80465.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 14 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dish 60cm Lower basket falling down from track

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84651.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 15 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3RD blocks itself due to the hard working of wheels

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84890.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 16 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F15 error code - the root cause proper recognition and solving procedure

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb84892.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 17 of 23

Indesit Service Bulletin

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Error Code F01 - Water Leakage into the Base – Checking for Leaks

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/tb86507.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 18 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SQG_DW_13/7_EN_ALARM TABLE “EOS” (DEA 601/DEA 602/DEA 700)

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm59718.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 19 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation document - Sliding Door PLP2

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64380.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 20 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INSTRUCTION SHEET DIMA SLIDING

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64630.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 21 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SLIDING HINGE 2017 Presentation

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64860.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 22 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Model Line 2017

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm64864.pdf

© Whirlpool EMEA www.scc-service.com

 7699 910 54194, 18/06/21
Whirlpool EMEA
SERVICE Customer Services
page 23 of 23

Indesit Service Manuals

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New product label format (Servicenet, WeDoc, Memwriter, ESAM)

INDESIT_ADMFILE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ../attachment/attachment1155633/sm70109.pdf

© Whirlpool EMEA www.scc-service.com

 4
17

2 3

7
Ind
esit
Co
mp
any

13
0000 SA
0000 MPL
0 E

ca
m
07 pion
02
02 i

12

11 8
10

9
14
16 2300340b

15
 36 39 4
38 41
37 2 45
40
3

5
35
6
29

28
7
34 8 44

27 33 9
32
31 43
42
10
30
46
11

26
21
24 1
25 13

14

16
23 22 15
17
19
20
18

2300217B
 Model type:
WIO 3T133 DL E S
WIO3T133DLES
Commercial code:
F105419
859991054190
869991054190

THIS DOCUMENT IS ONLY INTENDED FOR QUALIFIED TECHNICIANS WHO ARE AWARE OF
THE RESPECTIVE SAFETY REGULATIONS. SUBJECT TO MODIFICATIONS
2300185 Exploded views

mod.WIO 3T133 DL E S WIO3T133DLES

Page 4
2300185 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

001 C00299121 support rear cross beam eps 60
(482000032181) plp2

001 C00281418 support

(482000021980)

002 C00481003 soundproofing sx+dx+top plp2

(488000481003) 60cm

003 C00260213 cover fix (sx) lh

(482000021990)

004 C00514081 71029... 1 x C00536361 door spring adjuster

(488000514081) (488000536361)

004 C00304874 71028... 1 x C00536361 door spring adjuster luce fine ciclo
(482000040479) (488000536361)

005 C00344733 1 x C00633910 side panel left

(482000021979) (488000633910)

006 C00514073 71210... radio interference suppressor

(488000514073) dea70x

006 C00303062 cover filter dea700 hanning

(482000021978)

006 C00296812 71209... radio interference suppressor plp2

(482000022207)

007 C00500652 base + feet 60cm bu pd

(488000500652)

008 C00256564 rear foot adjustment rod

(482000021970)

009 C00277020 tray on bottom of tub 60cm

(482000087504)

010 C00256563 foot

(482000021968)

011 C00256565 rear foot adjustment assembly

(482000021969)

012 C00386602 rail front stop slim dark grey plp2

(488000386602)

013 C00387159 1 x C00627134 fixing plate for runner support

(488000387159) (488000627134)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 5
 013 C00387161 1 x C00627134 runner support upper basket
(488000387161) (488000627134)

014 C00304086 basket runner - upper eos

(482000021974)

015 C00386600 rail back stop dark grey whp

(488000386600)

016 C00344732 1 x C00633910 panel lateral right

(482000021975) (488000633910)

017 C00192903 this item is not fitted to this model

(482000091621)

018 C00345554 door seal - top and sides 60cm

(482000032549)

019 C00260214 cover fix (dx) rh

(482000021991)

020 C00282807 catch plate new

(482000021982)

021 C00480786 basket runner - upper plp2left

(488000480786)

021 C00502278 rail support assembly left third

(488000502278) basket

021 C00301202 fix ring rail support third basket

(488000301202)

021 C00502279 rail support assembly right third

(488000502279) basket

021 C00480788 basket runner - upper plp2 right

(488000480788)

022 C00386604 basket wheel axis

(488000386604)

022 C00386605 1 x C00666233 lower basket wheel

(488000386605) (488000666233)

023 C00386607 90709... cutlery basket medium - basic

(488000386607)

024 C00386610 track flap 60 plp2

(488000386610)

024 C00386609 flap grey plp2

(488000386609)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 6
2300185 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

025 C00533261 80704... basket hight lift up left basic red
(488000533261) dg

025 C00386613 80703... 1 x C00533261 basket hight left bacic plp2

(488000386613) (488000533261)

025 C00386615 80703... 1 x C00533262 basket hight right basic plp2

(488000386615) (488000533262)

025 C00533262 80704... basket hight lift up rh basic red dg

(488000533262)

026 C00630891 00221... upper basket fix,60,dg iec

(488000630891)

026 C00542616 1 x C00502975 glass wire support - upper basket

(488000542616) (488000502975)

026 C00538227 81107... 00220... 1 x C00630891 upper basket fix,60,dg

(488000538227) (488000630891)

026 C00386608 81106... 1 x C00630891 upper basket basic plp2

(488000386608) (488000630891)

027 C00480616 handle with inox insert 60

(488000480616)

028 C00630893 00221... left long flap dark gray iec

(488000630893)

028 C00624895 00221... combs fixing clip - lower basket

(488000624895) dkg

028 C00502282 00220... combs fixing clip - lower basket

(488000502282) silver

028 C00630895 00221... right long flap dark gray iec

(488000630895)

028 C00624896 00221... combs fixing clip - lower basket

(488000624896) dkg

028 C00502297 00220... right long flap silver gray n4520c01

(488000502297)

028 C00502296 00220... 1 x C00624890 left long flap silver gray n4520c01
(488000502296) (488000624890)

029 C00502295 00220... left short flap silver gray n4520c01

(488000502295)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 7
 029 C00630902 00221... left short flap ,dark gray ,iec
(488000630902)

029 C00630899 00221... right short flap dark gray iec

(488000630899)

029 C00502298 00220... right short flap silver gray n4520c01

(488000502298)

030 C00630892 00221... lower basket medium,60,assy,dg

(488000630892) iec

030 C00542963 81216... 00220... 1 x C00630892 lower basket medium,60,assy,dg

(488000542963) (488000630892)

030 C00502281 81215... 1 x C00630892 lower basket medium 60cm

(488000502281) (488000630892)

031 C00480946 tray hook 3-rd basket

(488000480946)

031 C00534528 80719... 1 x C00534437 third basket rail guide assembly

(488000534528) (488000534437) ass

031 C00480944 80718... 1 x C00534437 third basket rail guide assembly

(488000480944) (488000534437) ass

032 C00480943 upper cutlery basket side.

(488000480943)

033 C00538439 81111... upper cutlery basket centr. gr

(488000538439)

033 C00480789 81110... upper cutlery basket centr. gr

(488000480789)

034 C00387779 power clean crocodile (red color)

(488000387779)

035 C00387784 90219... 1 x C00664679 power clean pan hanger (dark grey
(488000387784) (488000664679) & red)

035 C00664679 10114... power clean pan hanger

(488000664679) assy,dkg,eer,60cm

035 C00566583 90220... 10113... 1 x C00664679 power clean pan hanger (dark grey
(488000566583) (488000664679) & red)

036 C00484402 handle with inox insert 60

(488000484402)

099 C00302233 fixing hole plug

(482000021994)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 8
2300185 Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

099 C00289967 basket buffer
(482000021993)

099 C00256553 serial port cover

(482000021989)

099 C00094138 lower basket buffer evo3

(482000093040)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 9
2300217B Exploded views

mod.WIO 3T133 DL E S WIO3T133DLES

Page 10
2300217B Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

001 C00387773 power clean body (dark grey &
(488000387773) red color)

002 C00298006 1 x C00535795 fixing ring assembly

(488000298006) (488000535795)

003 C00502280 upper sprinkler kit plp2

(488000502280)

004 C00480701 shower together with conduct c

(488000480701)

005 C00387520 rack guide casing c

(488000387520)

006 C00525300 80629... upper wash arm feed pipe

(488000525300)

006 C00386511 80628... 1 x C00525300 upper wash arm feed pipe

(488000386511) (488000525300)

007 C00386499 set upper wash arm plp2

(488000386499)

008 C00386505 ring nut of upper wash arm

(488000386505)

009 C00387524 lower spray arm

(488000387524)

010 C00387515 support - lower wash arm bush

(488000387515) dark grey

011 C00386682 ass. short microfilter dark ikea

(488000386682) grey

013 C00297947 outlet filter stainless inox plp2

(482000089344)

014 C00256556 1 x C00560405 water channeler

(482000022007) (488000560405)

015 C00257097 flap for set sump

(482000022010)

016 C00362214 turbidity sensor ntc marquardt

(482000032666)

017 C00297919 drain pump blac 50 hz copreci

(482000023392)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 11
 018 C00297922 set sump 3out plp2 + gasket
(482000089338)

019 C00272277 float - overflow unit 45cm

(482000022013)

020 C00273284 drain hose 45-60cm 1750mm

(482000022012)

021 C00302488 wash mot/pump blac9/6 50hz n4521f00

(482000022216) 220/240v+seal

022 C00302489 heating bldc9/6 + seal n4521f00

(482000022217)

023 C00256973 pipe sump-wash motor

(482000022017)

024 C00297915 pipe wash motor-motor washing

(482000089336) altern.

025 C00386861 1 x C00525113 motor washing alternating 3out

(488000386861) (488000525113) ps9

026 C00298442 seal o-ring 20 x 3mm blue qty 1 pr

(482000089379) pack

027 C00256558 tube - softener/sump 170mm eos

(482000030450)

028 C00256546 air break + turbine

(482000022022)

029 C00386598 ring-nut for air-flow body

(488000386598)

030 C00386530 water softener

(488000386530)

031 C00256549 seal - softener/wash chamber

(482000022025)

032 C00386533 retaining ring - softener dark grey

(488000386533) whp

033 C00386599 salt cap

(488000386599)

034 C00005819 salt funnel

(482000022028)

035 C00372679 inlet hose long waterstop 1640mm

(482000023524)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 12
2300217B Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

035 C00513408 70730... connector housing
(488000513408)

036 C00275963 hose support 45-60cm

(482000031300)

037 C00514072 71210... power cord eu plug with ferrite

(488000514072)

037 C00298020 earth wire spring

(482000022211)

037 C00296820 71209... supply cable eu plp2

(482000022210)

038 C00192903 this item is not fitted to this model

(482000091621)

039 C00192903 this item is not fitted to this model

(482000091621)

040 C00484559 90504... 1 x C00610390 housing assembly power dry

(488000484559) (488000610390)

040 C00610390 90505... housing assembly power dry

(488000610390)

041 C00480996 cap corner for turbo-dry evo3

(488000480996)

042 C00484561 turbo condenser power dry

(488000484561)

043 C00484563 clamp ring on external condenser

(488000484563)

044 C00495818 gate opening assembly cld plp2

(488000495818)

044 C00495819 plug

(488000495819)

045 C00610391 90505... o-ring

(488000610391)

046 C00513632 91109... air inlet duct assembly

(488000513632)

099 C00084479 hose clamp d=14,9

(482000022034)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 13
 099 C00264648 hose clamp d=45,5 pipe
(482000022036) sump/motor pump

099 C00141387 cable clamp hose

(482000022035)

099 C00273871 tie l=276

(482000022039)

099 C00273872 hose clamp d=18.5

(482000022220)

099 C00264650 hose clamp d=38,1 pipe

(482000022037) syncr.mot/wash ar

mod.WIO 3T133 DL E S WIO3T133DLES

Page 14
2300340b Exploded views

mod.WIO 3T133 DL E S WIO3T133DLES

Page 15
2300340b Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

001 C00511035 door soundproofing sliding fd 60
(488000511035)

001 C00297954 door insulation matress 2mm plp2

(482000032141) 60cm

001 C00386638 inner door panel stainless 60 n4517h00

(488000386638) plp2+disp

002 C00288993 1 x C00272277 microswitch n4520l00

(482000022042) (482000022013)

003 C00285843 71212... locking assembly dea602 new

(482000023245) 60cm

003 C00513644 71213... locking assembly long distance

(488000513644)

004 C00290256 wiring dea700 ev1/ev2

(482000022222)

004 C00502301 wiring power dry wax

(488000502301)

004 C00505638 wiring mudulo dea 701 power

(488000505638) supply

004 C00298012 wiring dea700 turbidity sensor/ntc

(482000022224)

004 C00289919 wiring salt card-softener

(482000022046)

004 C00298179 wiring dea700 alternato itw

(488000298179)

004 C00298019 wiring module earth

(482000022225)

004 C00525427 90106... wiring vsm wash w/o ferrite vsm

(488000525427) drain

004 C00502300 wiring power dry vent

(488000502300)

004 C00386694 form dispenser / door

(488000386694)

004 C00386697 wiring module earth door hinge

(488000386697) whr

mod.WIO 3T133 DL E S WIO3T133DLES

Page 16
 004 C00290261 wiring dea700 turbine-tray
(482000088736)

004 C00298018 wiring dea700 rinse

(488000298018)

004 C00298014 90105... wiring motor/ps all blac

(488000298014)

004 C00298015 wiring modulo seriale plp2 sx

(482000022047)

005 C00550558 81219... interface fi c+ wht dgt 7b inx d mz

(488000550558) t pc

005 C00480622 81218... 1 x C00550558 interface fi digit5 7b optimal

(488000480622) (488000550558)

006 C00511664 frontalino serigrafato

(488000511664) wio3t133dles

007 C00630365 00205... outer door 60cm sliding

(488000630365)

007 C00511006 00204... 1 x C00630365 outer door 60cm sliding

(488000511006) (488000630365)

008 C00511031 00531... sliding hinge right

(488000511031)

008 C00633078 00601... sliding hinge right

(488000633078)

009 C00257101 1 x C00516565 hinge wire 60cm eos

(482000085097) (488000516565)

010 C00511033 00531... sliding hinge left

(488000511033)

010 C00633077 00601... sliding hinge left

(488000633077)

011 C00526506 1 x C00629613 timer dea701 full litt rinse 769991054194

(488000526506) (488000629613)

011 C00505636 timer plp2 alternativa dea701 full 61054190200

(488000505636)

011 C00505636 timer plp2 alternativa dea701 full 769991054193

(488000505636)

012 C00272306 smart reader for card 8kb 32kb +

(488000272306) hood

mod.WIO 3T133 DL E S WIO3T133DLES

Page 17
2300340b Spare parts list

Ref. Code From To S/N Substitute Description Notice Industrial

013 C00534466 card w66-op-4-fd-3r 32kb 769991054194
(488000534466) 400011236713

013 C00495450 card wio3o33del 32kb 769991054193

(488000495450) 30100172004

013 C00495450 card wio3o33del 32kb 61054190200

(488000495450) 30100172004

014 C00511002 1 x C00535805 2v light on the floor, orange

(488000511002) (488000535805)

015 C00511028 lath cover-door,side

(488000511028)

016 C00511027 71230... 1 x C00519960 installation kit sliding hinge

(488000511027) (488000519960)

016 C00625776 00312... 00719... installation kit sliding hinge

(488000625776)

016 C00519960 00311... installation kit sliding hinge

(488000519960)

016 C00640530 00720... installation kit sliding hinge

(488000640530)

017 C00632470 00316... door bracket

(488000632470)

017 C00511037 00315... 1 x C00632470 door bracket

(488000511037) (488000632470)

017 C00520454 kit for decor panel from 10 to14

(488000520454) kg

099 C00538473 door positioning jig

(488000538473)

099 C00345656 screw

(482000023787)

099 C00294675 fixing bolt inner/outer door eos

(482000022064)

099 C00283060 hinge screw m5x14 tsp 6l-t20 90g

(482000022063)

099 C00094120 fixing bolt inner door/dashboard

(482000022062)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 18
 099 C00057706 self-tapping screw t1/2t
(482000022061)

099 C00373185 tank bottom border strip

(488000373185)

099 C00564429 crossbar in polyurethane foam

(488000564429) 60cm

099 C00520479 a set of screws for doors 12-16mm

(488000520479)

099 C00303056 tank border top strip plp2 60

(482000089596)

099 C00265386 plug front panel soundproofing

(482000032668)

mod.WIO 3T133 DL E S WIO3T133DLES

Page 19
 Notices

n4517h00: Properly wiring for inner door

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If serial number is before March 2016 when ordering the inner door also order wiring harness C00298017 as this may also be
required

n4520c01: THIS CODE IS OBSOLETE

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This code is obsolete and doesn't have any replacement.
When the original code will be no longer available and you need to replace it, you can order all basket assembly. Please check
basket assembly code in the spare part list.

n4520l00: Microswitch C00288993 - instruction how to get the replacement.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The micro switch is no longer supplied as a separate spare part.
It can be ordered in two ways:
1st way: by ordering the float and remove a micro switch from it.
or
2nd way: by ordering a door locking kit in which the micro switch is included.

n4521f00: Note - no clamps included

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
All sets of motors and heaters have no clamps to properly install the parts.

mod.WIO 3T133 DL E S WIO3T133DLES

Page 20
Here are the codes:

C00264648 HOSE CLAMP D = 45.5 PIPE SUMP / MOTOR PUMP

C00264650 HOSE CLAMP D = 38.1 PIPE SYNCR.MOT / WASH AR

mod.WIO 3T133 DL E S WIO3T133DLES

Page 21
 Electric schemes and links
Cod. 16003263700
Valid plan for the following Industrial codes 61054190200, 769991054193

mod.WIO 3T133 DL E S WIO3T133DLES

Page 22
 Legend

Legend: 16003263700

mod.WIO 3T133 DL E S WIO3T133DLES

Page 23
 Electric schemes and links
Cod. 400010937295
Valid plan for the following Industrial codes 769991054194

mod.WIO 3T133 DL E S WIO3T133DLES

Page 24
 Legend

Legend: 400010937295

mod.WIO 3T133 DL E S WIO3T133DLES

Page 25
 Service Quick Guide
SQG_DW_13/7_EN
Indesit Company, Service Department

“EOS” Alarm Table (DEA 601/DEA 602/DEA 603/DEA 700)

LED interface Fault display: LED4

IMPORTANT: Led interfaces only have been

included, to show clearly how Faults are indi-
cated. DIGIT and LCD (Display) interfaces are
not included, given the ease with which Faults
are identified (in writing). When Faults are being
displayed, the Leds involved in their identification
will remain alight and off, whilst the ON/OFF Led
and others on the machine may blink rapidly. LED1 LED2 LED3

LED4 LED4

LED1 LED1

LED2 LED2

LED3 LED3

LED1 LED3

LED2
LED4

LED1 LED3

LED2 DISH WASHING

LED4

LED1 LED3

LED2
LED4

1/3
 “EOS” Alarm Table (DEA 601/DEA 602/DEA 603/DEA 700)

LED combination
Fault Name
LED1 LED2 LED3 LED4
1 ANTI-FLOODING OVERFLOW On Off Off Off
WATER FILL SOLENOID VALVE
2 FAILURE Off On Off Off
3 DRAIN TIMEOUT On On Off Off
4 THERMISTOR (NTC) not compliant Off Off On Off
5 PRESSURE SWITCH non compliant On Off On Off
6 WATER FILL TIMEOUT Off On On Off
7 WATER TURBINE damaged On On On Off
8 TEMPERATURE TIMEOUT (1 hour) Off Off Off On
Software recognition error.
9 Main board not programmed On Off Off On
10 HEATING ELEMENT CIRCUIT not Off On Off On
compliant
11 Wash Pump Failure On On Off On
12 COMMUNICATION error between Off Off On On
main board and display
13 Main board NOT WORKING On Off On On
15 VIRTUAL SENSOR On On On On

ALARM 4 LED 6 LED NAME CAUSE CHECKS

- Water leak;
ANTI-FLOODING - Float switch or wiring defective;
1 1 1 Bowl fl oat microswitch electrical - New main board: Eeprom was programmed
OVERFLOW circuit OPEN! (must be closed) off-site; to reset the alarm, switch off and switch
on again using the ON/OFF button.

2 2
WATER FILL Fill valve admits water even when - Fill solenoid valve failure;
2 SOLENOID VALVE deactivated. - Main board fill solenoid valve triac short-circuiting;
FAILURE - Make certain drain hose is not on the floor.

- Drain pump blocked by foreign matter;

- Drain pump faulty/disconnected;
- Drain hose blocked;
1-2 1-2 - Drain trap blocked;
3 DRAIN TIMEOUT Maximum drain time elapsed. - Air bubble in hose;
- Check drain pump wiring and connectors at
component end and main board end;
- Check integrity of drain pump impeller;
- Replace drain pump.

- NTC sensor cables disconnected or damaged;

THERMISTOR (NTC) circuit not - Cables or connectors disconnected or short-circuiting;
3 3 THERMISTOR (NTC)
4 not compliant
compliant (break in continuity or - NTC sensor wet, short-circuit;
short-circuit)
- NTC sensor damaged, open circuit.

2/3
 “EOS” Alarm Table (DEA 601/DEA 602/DEA 603/DEA 700)

ALARM 4 LED 6 LED NAME CAUSE CHECKS

Pressure switch has not indicated - Pressure switch faulty;
1-3 1-3 PRESSURE SWITCH completion of fill, even though - Pressure switch tube damaged;
5 non compliant turbine has filled appliance with - Water in air trap;
water correctly. - Air trap damaged.

- Tap closed or partially closed;

2-3 2-3 WATER FILL Maximum interval of time for com- - Filler hose pinched;
6 TIMEOUT pletion of fill has been exceeded. - Filler hose filter clogged/bent;
- Water pressure low or flow meter doesn’t work;
- Water solenoid valve faulty or disconnected.
- Turbine faulty or disconnected;
- Connector terminals not making contact;
1-2-3 1-2-3 Turbine has given no signal indicat- - Turbine wiring faulty;
7 WATER TURBINE ing entry of water, even though fill - Turbine faulty, disconnected or wet;
damaged has effectively been completed. - WATER has been introduced manually;
- Filler hose filter obstructed;
- Pressure switch faulty.
- NTC sensor bracket detached from bowl;
- Fault in electrical circuit of heating element;
- Heating element ITR incorrectly calibrated/faulty;
- Excessive suds;
Maximum interval of time for es-
8 4 4 TEMPERATURE tablishing temperature has been - Heating element false contact
TIMEOUT (1 hour) exceeded (1 hour). - NTC sensor incorrectly calibrated
- Lime scale on heating element. Water hardness
setting not compliant. User not putting in salt
- NTC sensor separated from socket (replaces
first check)
- Heating element defective.
Software recogni-
1-4 1-4
9 tion error. Main Software recognition error Proces- - Main board not programmed;
sor not programmed.
board not pro- - Incorrect setting file.
grammed
- Heating element cables disconnected;
2-4 2-4 HEATING ELE- HEATING ELEMENT CIRCUIT not - Main board relay defective
10 MENT CIRCUIT not compliant (circuit open). - Heating element defective;
compliant - Main board relay defective.
- Motor connectors disconnected;
1-2-4 1-2-4 No communication/power between - Wiring not compliant;
11 Wash Pump Failure BLDC/BLAC motor and main board, - Foreign matter between motor blades;
or motor seized. - Motor defective/seized.
- Fault in Main board/user interface wiring;
COMMUNICATION No communication/connection - Disconnect from electrical power supply. Wait 2
3-4 3-4 error between main
12 board and display
between main board and user
interface.
minutes. Reconnect appliance to power supply
and test again;
- User interface defective.
Main board NOT
13 1-3-4 1-3-4
WORKING Main board NOT WORKING - Replace main board.

1-2-3-4 1-2-3-4 Reading between Wash pump and

15 VIRTUAL SENSOR Drain pump not consistent. - Replace wash pump.

DISH WASHING

3/3
 195151432.02

KIT - 210277610

mm 598
18÷50
(13÷17) SERVICE

HEX 2,5
W11114524

HEX 8
H2

2mm

820-900
1 2 3 4 5 6 7 8 9

176
166
16x 8x

685-800
555
195151432.00

KIT - 210277610

3,5x25 mm
mm

4x 3,5x12 mm
HEX 2,5

598
HEX 8

2-10kg
18÷60
H2

2mm

(13÷18)

1 2 3 4 5 6 7 8 9
820-900

176

2x
166

16x 8x
720-800

2x 4x 3,5x25 mm 3,5x12 mm 555

3,5x16 mm max: 10kg
G H
C F
2x
560
min
2x
A 3,5x18 mm 2x
820 - 900

AR+AL BR+BL
B D
min 600
J1 J2 K L1

10,5

3,5x16 mm
E min: 0,05 MPa/0,5 Bar

H
482,5 max: 1 MPa/10 Bar 482,5
3/4”

G
503,5 503,5

F
10 mm
min.

min: 25mm
max: 800 mm
min: 400 mm

~1500 mm
~1500 mm
SERVICE
L2 ~2000 mm
W11025318

C
1 2 3 180° 180°
586
576
561

SERVICE
8x 2x

TOP TOP

2x
= = TOP 8x2x TOP

1 8 B

60
4,2x16 mm n5
4 2
5 2 mm
6 1mm 3mm
10 mm

mi
8x 2x

8x 2x
TOP TOP

7a 7b
TOP TOP

8x 2x

TOP TOP

9
min. 3 mm

18,7 10

2x10 mm
25

482,5 482,5

M
503,5 503,5
541 541

2x
561 561

7a E 7b E

A B

A
4x 16x 8x 4x 16x 8x
AR+AL BR+BL
F G H J F G H J
3

820 - 900
3

= =
AR

= =
AL

= =
AR

= =
AL

3,5x18 mm 2x 2x
AL+AR BL+BR
D W11114521 min 6
0 0
B J1 J2 K L

10,5

min: 0,05 MPa/0,5 Bar

482,5 482,5
E max: 1 MPa/10 Bar
503,5 503,5
3/4”

10 mm
min.
min: 25mm

max: 800 mm
min: 400 mm
~1500 mm
~1500 mm
~2000 mm

1 2 3 180° 180°
586
576
561

195151432.00

KIT - 210277610

mm

2,5
598

8
18÷60

HEX

HEX
H2

2mm
(13÷18)

1 2 3 4 5 6 7 8 9

-900

176
820

166
A
16x 8x

0
5
2x 4x 3,5x25 mm 3,5x12 mm 55

80
3,5x16 mm max: 10kg

720-
G H
C F
2x 0
56
min
2x
A 3,5x18 mm 2x

- 900
AR+AL BR+BL
B D

820
min 600
J1 J2 K L1

10,5

E min: 0,05 MPa/0,5 Bar

482,5 max: 1 MPa/10 Bar 482,5
503,5 3/4” 503,5

= = mm
195151432.00

KIT - 210277610
HEX 2,5

598
HEX 8

18÷60
H2

2mm

(13÷18)

1 2 3 4 5 6 7 8 9
820-900

176
166

16x 8x

10 mm
720-800

2x3,5x16 4x 3,5x25 mm 3,5x12 mm 555

mm max: 10kg

.
G H

min
C F
2x
560

min: 25mm
min
2x3,5x18
A mm 2x
820 - 900

BR+BL
B D AR+AL

min 600
J1 J2 K L1

m
10,5

: 80 m
~1500 mm
E min: 0,05 MPa/0,5 Bar
482,5 max: 1 MPa/10 Bar 482,5
503,5 3/4” 503,5

0m
max 400 m
~1500 mm
10 mm
min.

min: 25mm
max: 800 mm
min: 400 mm

~1500 mm
~1500 mm
SERVICE
L2 ~2000 mm
W11025318

:
~2000 mm

min
1 2 3
SERVICE
586
576

180° 180°
561

L2
8x 2x
TOP TOP

= = TOP 8x
2x TOP

1 8 B

W11025318
4 2
5 2 mm
6 1mm 3mm
10 mm

B
8x 2x

8x 2x
TOP TOP
7a 7b
TOP TOP
8x 2x
TOP TOP

9
min. 3 mm

18,7 10

2x10 mm
25

482,5 482,5
503,5 503,5
541 541

3
561 561

1 2
7a E 7b E

1 8
A B
8x 16x

180° 180°
4x 16x 4x 8x
586
576

AR+AL BR+BL
561

F G H J F G H J
3

8x 2x

TOP TOP
AL AL

AR AR

= = = = = = = =
A

= = TOP
8x 2x
TOP

1 8 B

4 2
5 2 mm
6 1mm 3mm
10 mm

7b
8x 2x

7a
TOP TOP

8x 2x

TOP TOP

8x 2x

TOP TOP

m
18,7 10

.3m
2x10 mm

min

25
482,5 482,5
503,5 503,5
541 541
561 561

7a E 7b E

A B
4x 16x 8x 4x 16x 8x
AR+AL BR+BL
F G H J F G H J
3

AL AL
AR AR

= = = = = = = =

4 5 6 1mm 3mm
2

7b
195151432.00

7a 7b
KIT - 210277610

mm SERVICE
2,5

598
8

18÷60
HEX

HEX
H2

(13÷18)
2m

1 2 3 4 5 6 7 8 9
0

6
90

17
0-
82

6
16

16x 8x
0

2x 4x 3,5x25 mm 3,5x12 mm 555

80

3,5x16 mm max: 10kg

0-

G H
F
72

C
2x 0
56
min
2x
A 3,5x18 mm 2x
0

BR+BL
90

B D AR+AL
0-
82

min 600
J1 J2 K L1

195151432.00
10,5

KIT - 210277610

E min: 0,05 MPa/0,5 Bar

9
mm 482,5 max: 1 MPa/10 Bar 482,5
HEX 2,5

598
HEX 8

18÷60
503,5 3/4” 503,5
H2

2mm

(13÷18)

1 2 3 4 5 6 7 8 9
820-900

176

195151432.00

KIT - 210277610
166

mm
16x 8x
720-800

2x 4x 3,5x25 mm 3,5x12 mm 555

max: 10kg
HEX 2,5

598 3,5x16 mm
HEX 8

18÷60
G H
H2

F
2mm

(13÷18) C
2x
560
min
2x
1 2 3 4 5 6 7 8 9 A
820-900

2x
176

3,5x18 mm
820 - 900

AR+AL BR+BL
B D
166

min 600
J1 J2 K L1
mm
10 n.
mi

16x 8x
min: 25mm
720-800

2x 4x 3,5x25 mm 3,5x12 mm 555

max: 10kg
m

~1500 mm
00 m

3,5x16 mm
H 10,5
G
m

F
:8 m

C
2x
~1500 mm
ax 00

560
min E min: 0,05 MPa/0,5 Bar
m :4

2x
A 3,5x18 mm 2x 482,5 max: 1 MPa/10 Bar 482,5

~2000 mm
820 - 900

3/4”
in

BR+BL 503,5
B D AR+AL 503,5 SERVICE
L2
m

min 600
J1 J2 K L1
W11025318
10,5

E min: 0,05 MPa/0,5 Bar

482,5 max: 1 MPa/10 Bar 482,5

2 3
3/4”

1
503,5 503,5
180° 180°
576
6
1

58
56
10 mm
min.

8x 2x

min: 25mm
TOP TOP
max: 800 mm
min: 400 mm

~1500 mm A
~1500 mm
= = TOP
8x 2x
TOP

(19,7) 10
SERVICE
L2 ~2000 mm
W11025318 1 8 B
10 mm
min.

min: 25mm
max: 800 mm
min: 400 mm

~1500 mm
~1500 mm
1 2 3 180° 180°
586
576
561

SERVICE
L2 ~2000 mm TOP
8x 2x

TOP

W11025318 A

= = TOP
8x 2x
TOP

1 8 B

1 2 3 180° 180°
586
576
561

A
TOP
8x 2x

TOP

4 2
5 2 mm
10 mm
6 1mm 3mm
= = TOP
8x 2x
TOP

2 mm
7b
8x 2x

7a
TOP TOP

B
8x 2x

1 8 TOP TOP

8x 2x

TOP TOP

9
4 2
5 2 mm
6 1mm 3mm
10 mm

7b
8x 2x

7a
TOP TOP

8x 2x

TOP TOP

8x 2x

TOP TOP

4 2
5 2 mm
6 1mm 3mm
10 mm

10 mm
18,7 10
m

7b
8x 2x

7a
TOP TOP
m

8x 2x

TOP TOP

8x 2x

TOP TOP
3

9
2x10 mm
min. 3 mm

18,7 10
in.

min. 3 mm
m

2x10 mm
25
25

482,5 482,5
482,5 482,5
503,5 503,5
min. 3 mm

18,7 10
503,5 503,5
25

2x10 mm 541 541 541 541

561 561 561 561
25

7a 7b
482,5 482,5
A
E

B
E
7a E 7b E
503,5 503,5
4x 16x 8x 4x 16x 8x
AR+AL BR+BL
541 541
F G H J 3
F G H J A B
561 561 4x 16x 8x 4x 16x 8x
AR+AL BR+BL
F G H F G H J
7a E 7b E 3
J 3

A B
4x 16x 8x 4x 16x 8x
AR+AL BR+BL
F G H J F G H J 3
3

AL AL

AR AR

= = = = = = = =
AL AL AL AL
AR
AR
AR AR

482,5 = = = = = = = =

= = = = = = = = 482,5
503,5 503,5

563 563

7a E 7b E
W11114521
SERVICE

max. 2 mm
A B
4x 16x 8x 4x 16x 8x
AL + AR BL + BR
F G H F G H J2
J1 3

AR BR
AL BL

= = = = = = = =
8 9 10
5 K

2,5 Nm 2,5 Nm

~ 300

11 12

13 14
5

4
6 7

1/2 x
1/2 x
min 2mm

max 80mm

15

M
L

16a 16b
C C

D
3

C D
D D
D D
Sliding Hinge 2017

WIND Platform 2017

Sliding Hinge Project
2017

Fabriano, May 2017

Version 1.0
Objective of project

Objective:
To use panel height up to 80 cm and plinth
height down to 2 cm.
This new sliding hinge cover almost totally
the dishwasher and it has the capability to
slide on the external door to avoid touch the
basement of the machine.
The new hinge support from 2 until 10 Kg of
wooden decor door.

Installation Sheet
Dismantling

1 2 3

(1) Remove the eight screws used to fix the internal door and the external one
(2) To dismatling completelly the door remove the seven outside screws
(otherwise it is not necessary)
(3) Remove the right lateral panel (fixed with five screws and two hooks)
Dismantling

4 5 6

(4) Remove the screw inside of the machine. As well It is used to fix used to fix
the sliding hinge
(5) Remove the two srews on the frame area of the internal door
(6) Remove the two screws used to fix the hinge on the basement
Dismantling

(7) There is a metalic strip behind of the internal

door.
Unhook it and extract the hinge

(8) Disconnect the Yellow/Green cable. Now will be

possible to remove totally the hinge to substitute it
Thank You !!!
 Dishwasher
Model Line 2017

Whirlpool Corporation - Confidential

 General Information:

• Production: Radomsko Plant – Poland

• Brands involved: Hotpoint, Ariston, Hotpoint-Ariston, Whirlpool,
Privileg, Bauknecht, Indesit.
• Range: 176 codes (SKUs) - only 60cm
• SOP: since march until october 2017
• Countries involved: EMEA area
• Number of pieces first 4 month: about 68500 pcs

Whirlpool Corporation - Confidential

2
 Legend:

CHANNEL (IF
AESTHETIC
SPECIALS BRAND NECESSARY FOR TYPE UI BASKETS Energy NOISE Special Features COLOUR MARKET
LINE
DIFFERENTIATION)

I = IFA A=aquastop if necessary

W =Whirlpool R= Retail F =Freestanding F = Flagship 1 = Knob (VB) P= Premium 15 1 = A+ 1=41dBA "" = White "" = Europe
dedicated (DE) for differentiation

O = Online B= Built in (Half I

B= Bauknecht K= Kitchen P = Premium 2 = Led O= Optimal 14 2= A++ 2 = 42 dBA 6= 6 liters S = Silver UK
(FR) ntegrated)

O = Otto (DE) G= Ignis U= Unieuro I= Fully integrated O = Optimal 3 = Digit T 1/2/3= top 14 3= A+++ 4 = 44 dBA P= power clean X= Inox CH
4= A+++ - D= power dry (No P
R= Privileg … U= Built Under C = core 4 = Mira C = Core 14 6 = 46 dBA I =Ixelium
10% when present)
34 = Digit 4
A=laden C= Column Mount E = essential B = Basic 13 7 = 47 dBA E= end of cycle light
progr (TK)
34 = Digit 6 <<< B+ = Basic plus
Y=Maytag " " = 49 dba F= Fixed 3rd basket
progr (TK) 14
H=Hotpoint or
0 = 51 dbA L= Flexible third basket
Hotpoint/Ariston
L= Ariston 39 = 39 dbA T = Light in the tub
S = Sliding (only FD)
G = Glass Care
W = ZoneWash 3D

Whirlpool Corporation - Confidential

3
 General Information:

Glass Care Lights in Tub 3D Zone Wash 39 dBa

Whirlpool Corporation - Confidential

4
 General Information:

Aesthetics
 FS and PI migrating on
Bauknecht aethetics 
New Touch UI (“Mira”) New Touch UI (“Mira”) New Touch UI (“Mira”)
UI Flagship & Premium (FS) Premium (FS) Premium (FS)
Flagship & Premium (FD) Premium (FD) Flagship & Premium (FD)

Glass Care
  
Light in
the tub  4 lights  2 lights  4 lights

Zone Wash
3D   
39db
 Tactical  
Sliding
Hinges   
Whirlpool Corporation - Confidential
5
 User Interfaces:

Whirlpool Corporation - Confidential

6
 User Interfaces:

Whirlpool Corporation - Confidential

7
 Some examples of free standing user interfaces:

Bauknecht

Whirlpool

Whirlpool Corporation - Confidential

8
 Programs:

Important:
In the IFU is declared that for use this device customer must select the dedicate function but, in
reality, it will works each time water will be sent to the shower.
Whirlpool Corporation - Confidential
9
 Componets:

GLASS CARE:
Dedicated accessory that allows you to safely store different types of stem glasses in the lower
rack.
It enables cleaning & drying results by allowing an optimised and stable positioning of the glasses.

Whirlpool Corporation - Confidential

10
 Componets:
Light In The Tub (LITT):
The appliances provided with LIGHT IN THE TUB
feature are equipped with some LEDs in the
dishwasher tub. Four leds for some brands (for
example: Whirlpool and Bauknecht brand) and
two for others brands (Hotpoint brand).
This feature is active by default, but it is possible
to deactivate it in the SETTINGS MENU.
When the feature is active the LEDs in the tub are
automatically switched ON/OFF as soon as the
user open/close the door respectively, regardless
the User Interface state.
When the LEDs in the tub are switched ON, they
slowly turn on with a fade-in effect (from 0% to
100% in 1 second).
When the LEDs in the tub are switched OFF, they
slowly turn off with a fade-out effect (from 100% to
0% in 1 second).
If the door remains opened for more than 10
minutes, the LEDs in the tub will be switched OFF
(to turn them ON again, the door has to be closed
and opened again).

Whirlpool Corporation - Confidential

11
 Technical Data: Light In The Tub (LITT):
On Board
(1)
The driver is constant current power supply, feeded constantly
from 230 VAC. Power consumption in OFF state is close to 0
Ligths
Watt.
(out) – (2)
(1) - ON/OFF signal comes from DEA701 connector J4
Power - cable: violet constant +12 VDC
(in) - cable: gray GND on / off according to algorithm and door status
230 VAC
(2) - In case of regular operation, output current is about 68 mA.

Driver

Cover

Whirlpool Corporation - Confidential

12
 Componets:
Light In The Tub (LITT) – Extraction of the IFU:

Whirlpool Corporation - Confidential

13
 Componets:
Light In The Tub (LITT) – Extraction of the IFU:

Whirlpool Corporation - Confidential

14
 Componets:
- (IFU extraction)

3D Zone:
This component is connected hydraulically at the same channel in which is connected the
Power Clean device and the shower.
To remove and re-fix it it is necessary to follow the same steps used for the Power Clean
because it is hooking in the same way.
When it works, it wash using the same concept that Power Clean but the jet will go in
vertical direction <from bottom to the top>.
The shower is part of this technology because helps to wash from top to bottom.
3D Zone will works each time customer will set the shower.

Important:
In the IFU is declared that for use this device the customer must select the dedicate
function and say that it is compatible only with “intensive” and “normal” programs
but, in reality, it will works each time water will be sent to the shower.
Whirlpool Corporation - Confidential
15
 Componets:

Noising 39 db:
To reach this goal, it was necessary add some insulations panels in differents
parts of the machine (see pictures), for example inside the basement, in the
inner surface of the outer door.
Others insulation must be installed, for example: insulation between the tub and
side panel or in case machine is installed with plinth aligned with the door (see
left side pictures).
Declaration 39db required “all those topics done”, otherwise noise level
will be over the target. Declaration was done with wooden panel and plinth
aligned and with a gasket between these two components as you can see
in the side picture (flush installation)
Whirlpool Corporation - Confidential
16
 Wiring Diagram

Whirlpool Corporation - Confidential

17
 Wiring Diagram
(DEA 701):

Whirlpool Corporation - Confidential

18
 Serviceability:

- DEMO mode
- Autotest sequence activation
- Autotest sequence (components activation)
- Failure indication
- Failure codes

Whirlpool Corporation - Confidential

19
 Demo Mode:

Demo Mode:
This function is available only in machines top range (F.S. or F.D.)
To active and deactive it:

 Mira LCD Demo Mode is present in menu, settings, Demo Mode «ON» or «OFF».

 Mira DGT Demo Mode is selectable as:

- Machine goes to standby by standby button (Switch OFF the machine)
- Keep pressing timer delay button until "beep" signal (by pressing and hold DELAY TIMER until beep)
- Enable machine by pressing standby button (Switch ON the machine)

Whirlpool Corporation - Confidential

20
 Autotest Activation:

To start AUTOTEST procedure in machines without «P» button::

- Switch ON the appliance pressing ON/OFF button

- Press twice consecutively PREV button (<)
- Switch OFF it pressing ON/OFF button
- Press twice consecutively the PREV button (the buzzer will play a long tone to confirm).
- Press ON/OFF button (again the buzzer will play a long tone to confirm)
- Press Start button to run AUTOTEST

Whirlpool Corporation - Confidential

21
 Autotest Activation:

To start AUTOTEST procedure in machines with «P» button, starting

with machine in OFF condition and not in «Stand by» condition:

- Switch ON the appliance pressing ON/OFF button

- Press twice consecutively “P” button
- Switch OFF it pressing ON/OFF button
- Press twice consecutively “P” button (the buzzer will play a long tone to confirm).
- Press ON/OFF button (again the buzzer will play a long tone to confirm)
- Press Start button to run AUTOTEST

Whirlpool Corporation - Confidential

22
 Autotest Sequence:
The Autotest sequence in DEA 701 – PLP2 machines is as follows (it requires about 15 minutes):
1. The machine is drained to empty status + 15 seconds (D-Sensor); at the same time, the alternating wash motor is
repositioned to operate with the bottom delivery outlet open
2. Empty status is verified by the wash pump (W-Sensor), running at 1400 rpm for 40 seconds
3. The tub takes in 2 litres of water, with activation of the W-Sensor to confirm Full status
4. Another 2 litres are added in dynamic mode
5. The wash pump is activated for 30 seconds on the top spray arm and showerhead delivery outlets
6. Flow is switched to the bottom spray arm and showerhead delivery outlets for 30 seconds
7. Flow is switched to the bottom and top spray arm delivery outlets for 30 seconds
8. The Wash heating element is activated, with the Wash Pump running at 2500 rpm, and the temperature raised to 30 °C
9. The machine is drained to empty status (D-Sensor) + 15 seconds
10. The dispenser is opened by activating the solenoid valve for 2 seconds
11. 10-second pause
12. Service action: once the dispenser has opened, open the door, remove the salt cover and insert the door needle
13. The regenerate solenoid is activated for 5 seconds
14. The fill solenoid valve and regenerate solenoid valve are activated for 10 seconds.
Check for outflow of water from the salt container
15. The Turbo Dry Fan is activated (if installed)
16. The machine is drained to empty status (D-Sensor) + 15 seconds

Whirlpool Corporation - Confidential

23
 Fault Table:

IMPORTANT:
It is an extraction of the original Fault Table. Please, use the full one to consults the Fault codes.
Whirlpool Corporation - Confidential
24
 Dismantling
IMPORTANT INFORMATION:
Remember, before start to work on the machine, it is very important to drain out the
water inside it, remove the dishes and disconnect electrically the appliance.
Moreover, remember to use all required safety tools (example: Rubber gloves).
YOUR SAFETY IS IMPORTANT.
AVOIDS DAMAGES.

Whirlpool Corporation - Confidential

25
 Dismantling:
To replace the 3D Zone device it is necessary dismantling it using the same procedure used to
dismantling the Power Clean device. It is fixed in the same way. To works in easy way, by starting
removing the lower spray arm (1).

1 2

To extract 3D Zone, using a small flat

screw-driver (3) and enlarge the hooks
(as you can see in the pictures alogside –
as in picture 2).
To fix again, pay attention hooks will block 3
the device.
Whirlpool Corporation - Confidential
26
 Dismantling:
To dismount the lamps fixed on the frontal area (above the door – see picture 1).

The lights are an assembly. It means, when a

lamp will be burned the technicians should
remuve all the assembly.
1 2

For dismount the top lamps, using a small flat screw-driver, press lightly on the hooks. In this way them
will be free and will be possible to extract them.

Whirlpool Corporation - Confidential

27
 Dismantling:
To dismount the laterals lamps (2) is necessary dismount the laterals panels (only for products with them).

The lights are an assembly. It means, when a

lamp will be burned the technicians should
remuve all the assembly.
1 2

For dismount the laterals one (where are present), using your finges, block the plastic cover (at the internal of
the machine). With the other hand, turn the lamp and after pull it out.Now it is possible separate both parts.
Please, pay attention, with there is a gasket with the internal plastic cover; it is usaful to avoid water leakages.

Whirlpool Corporation - Confidential

28
 Dismantling:
To dismount the driver is necessary remove the left laterar panel.

For dismount the driver, once removed the lateral panel, disconect electrically
the driver (1) and then unhooks the plastic support (2). Pull the driver up.
To extract it tottally, use the window in the front part of the base (3).

1 2 3
Whirlpool Corporation - Confidential
29
 Last questions

Whirlpool Corporation - Confidential

30
 SERVICE MANUAL Profile: general
Issue: February 2019
SM034654
Compiled by: F.Licco
Revision: 02

Title: Products label new format and impact on Servicenet, WeDoc, Memwriter
and ESAM

Label changes and how to manage them 1

Products documentation research: 3
Industrial Code search in WeDoc 3
MEMWRITER/ESAM 6

Label changes and how to manage them

The new label format has been changed as shown below;

The first label (A) is related to products born before January 2017 or products even produced after Jan
but without any change in the Bill Of Material (BOM), with the Industrial Code (I.C.) starting with “W” or
without “W” and it has 11 numeric digits;

The second label (B) is related to products born after January 2017, with the I.C. starting with “76” or
“75” and it has 12 numeric digits

Legend:
1 - Model Description
2 - Commercial Code: Commercial Code 12 digits

1
 SERVICE MANUAL Profile: general
Issue: February 2019
SM034654
Compiled by: F.Licco
Revision: 02

Title: Products label new format and impact on Servicenet, WeDoc, Memwriter
and ESAM
3 - Industrial Code: it is the versioning of the product;
IMPORTANT: The industrial code has to be used in order to search the documentation in the systems.
NOTE: when you enter the Industrial code, both in Servicenet and in WeDoc, do NOT write the “W”
before numbers.
The I.C. in the label A has the old format already used in Indesit factories;
The I.C. in the label B has the new format with 12 numeric digits, made up as follow

4 - Serial Number: it has the format already used in Whirlpool factories;

Factories with the new label and relevant codes:

Points 3 and 4 are related to the programming of the mainboard by the Tools (Memwriter and ESAM);

5 - F… code: it is the old commercial code of Indesit, today it is used only from UK and Russia market;

6 - old serial number: it has 9 digits and it is used only from UK and Russia market; it is useful to identify
the month of production (second and third digits) and the production day (fourth and fifth digits)

in this case 6 (Year 2016); 06 (Month: June); 22 production day, etc

2
 SERVICE MANUAL Profile: general
Issue: February 2019
SM034654
Compiled by: F.Licco
Revision: 02

Title: Products label new format and impact on Servicenet, WeDoc, Memwriter
and ESAM
Products documentation research:
Currently the rule is to look for the documentation according to the product Brand:

(Indesit, Hotpoint, Hotpoint Ariston, etc) ---> ServiceNet

(Whirlpool, Ignis, Kitchenaid, Bauknecht etc) ---> WeDoc

However, the new documentation is born on ServiceNet

In WeDoc you can search for the same documentation by following the instructions below

Industrial Code search in WeDoc

An additional field is available in WeDoc: Industrial Code;

The Industrial Code must have 11 or 12 digits and must be only numeric (if you find the “W” in the
label, it is mandatory to remove it);
New industrial codes with 12 digits created from January 2017 start with 76* or 75*.

In case of research through WeDoc, system will check in ServiceNet if the Industrial code exists, and in
case of presence the link appears in the same screen (3);

3
 SERVICE MANUAL Profile: general
Issue: February 2019
SM034654
Compiled by: F.Licco
Revision: 02

Title: Products label new format and impact on Servicenet, WeDoc, Memwriter
and ESAM
When you click the button SERVICENET you will be routed in the Servicenet web site directly in the F…
code documentation;

It is possible that for a F… code you may have more than one industrial codes; in this case
please select the one that you are looking for (1), it will become bold and you look for the
correct Spare parts list (2) linked to the selected Industrial code.

4
 SERVICE MANUAL Profile: general
Issue: February 2019
SM034654
Compiled by: F.Licco
Revision: 02

Title: Products label new format and impact on Servicenet, WeDoc, Memwriter
and ESAM
If the Industrial code doesn’t exist, a message appears informing the documentation is not available; in
this case please check the Industrial Code inserted: if it is correct, it means the documentation is
missing and please contact your referent.

In case that a user in WeDoc has filled both fields for 12NC, Model and Industrial Code, a message will
advise that the primary search will be by the Industrial Code.

5
 SERVICE MANUAL Profile: general
Issue: February 2019
SM034654
Compiled by: F.Licco
Revision: 02

Title: Products label new format and impact on Servicenet, WeDoc, Memwriter
and ESAM
PROGRAMMING TOOL
Memwriter PC and Android Memwriter APP

USE ALWAYS the Industrial code in the memwriter

ACCEPTED COMBINATIONS BY THE MEMWRITER

CODE S/N

A) 11 digits Industrial code 9 digits Serial Number

B) 12 digits Industrial code (76* or 75*) 12 digits Serial Number

C) 11 digits Industrial code 12 digits Serial Number

ESAM

How to search in the ESAM when it is present the new product label?
USE ALWAYS the Industrial code in the ESAM, below some samples;

1 CASE

2 CASE

6
 Title :

Circulation: general TB001098 Issued: 1st April 2008

Drafted by F.F.

Indesit Company, Service Department

Title : Water/ steam leaking from door seal

Products involved

All dishwasher models EVO3 and EOS (new platform)

Possible faults

1- Water/steam leaking from door seal (at top)

2- Water leaking from corners (at bottom)

Preliminary points

 Where possible, water or steam leakages from the door seal must be
verified in person.

 Water/steam leakages are classed as a fault when they produce a visible amount of steam,
with resulting water deposits, in the areas of the:
door flange (photo1) worktop area (photo2) floor (photo3)

 On the contrary, a small amount of steam escaping from the appliance and dissipating
without leaving condensation is not to be considered a fault. It is normal for the appliance to
emit small puffs of steam at 60 -70 C which then clear in the air.

 Any leakage of suds caused by improper use of detergents or the use of rinse aid directly in
the tank rather than the dispenser must not be considered an appliance fault.

 In the event of leaks, the manufacturer will not be responsible for any damage to the
worktop if at the time of installation the latter was not protected with the protective film
supplied, (photo4)
in any case, inform the customer of the installer's shortcomings and apply the film. (photo5)
The adhesive film also protects against steam during regular appliance operation: ( e.g.:
door opening and closing during operation or at the end of a wash cycle)

1/4
 Title : Water/ steam leaking from door seal

Diagnosis of causes + operation to be carried out

1- Water/steam leaking from door seal (at top)

1.1 appliance installation not carried out properly
the door is not aligned properly with the tank opening

1.1.1 the dishwasher is not resting properly on the support feet, it is warped.
1.1.2. the dishwasher is “ jammed” inside the housing unit, resulting in warping.
1.1.3 the door does not close properly, the wooden doors cause an obstruction (movement must be
unhindered)
1.1.4. the door is deformed (fit the panel and fix the warping by hand)

Checks: check the mark left by the seal on the edge of the stainless steel door. (photo5)
Clean the seal and the edge of the stainless steel door, lightly brush the seal with grease or thick soap. Close
the door so that the lock engages, do not press shut, re-open the door and check the mark left by the seal,
which must be centrally aligned and constant.
Action: install the dishwasher correctly in the housing unit so that nothing is jammed or deformed. Adjust the
height using the adjustable feet so that the weight is evenly distributed over all feet.
Important! Warping of the tank during installation is the leading cause of a leaking seal.

1- Water/steam leaking from door seal (at top)

1.2 no silicone sealing the “holes” at the corners, between surround and tank (only
for EVO3)
Action:
For EVO3 :
remove the seal, check for the presence of holes not filled with silicone between the surround and the tank.
If there are any, fill them using acetic silicone, spreading it well over the area in order to avoid lumps, then refit
the seal

For EOS :
Important! Silicone is not required on EOS models.
The particular seal is designed to guarantee:
watertight seal at side (between surround and tank) + watertight seal around door (edge and door)
Any silicone applied could have a negative effect on the final positioning of the seal, deviating it from the sealing
edge.
Laboratory and usage tests have shown that leaks are always between the edge and the door, never between
the surround and the tank.

P.s. in the event that inspection carried out, based on considerable personal technical experience, still indicates
the application of silicone between the surround and the tank in an EOS model, apply only a minimum amount,
spreading and flattening it well to AVOID the formation of lumps which might “lift” the seal from its seat.

2/5
 Title : Water/ steam leaking from door seal

Diagnosis of causes + operation to be carried out

1- Water/steam leaking from door seal (at top)

1.3 deformed or poorly fitted seal

Remove the seal and replace it with a new one,

Important! the seals of EVO3 and EOS, ARE NOT INTERCHANGEABLE

For EVO3: replace the seal code C00141317, fit it naturally into the surround section so that it is well
extended at the corners, ensure the length at the bottom is identical on the right and left.

For EOS: Important! replace the seal with code C00256570,

1. procure some everyday liquid soap or silicone oil (photo6)
2. wet the seal along its entire length, (photo7) (to make this easier, put the liquid soap/silicone oil in one
hand and slide the seal through your hand so that it is completely lubricated).
3. It is advisable to also lubricate the surround section, especially in the corners(photo8)

4. insert the seal in the surround section, starting from the bottom (right or left), ensuring the seal touches
the bottom of the tank (photo9)

Generous lubrication of the seal

aids optimal application

5. it is vital to insert the seal WITHOUT STRETCHING IT, at the corners this will prove more difficult
because of the reduced dimensions of the surround section, in this case fit the seal one centimetre at a
time, but without stretching it!

6. there is no need to silicone the corners

Final checks: check the mark left by the seal on the edge of the stainless steel door.
Clean the seal and the edge of the stainless steel door, lightly brush the seal with grease or thick soap. Close
the door without pressing it shut, re-open and inspect the mark left by the seal, which must be centrally aligned
and constant

3/4
 Title : Water/ steam leaking from door seal

Diagnosis of causes + operation to be carried out

2- Water leaking from corners (at bottom)

2.1 no pressure breathing between wash/rinse (only EVO3)

EVO3 with serial number prior to October 05 ( <51001 0001)
2.1.1 Replace airbreak breather, (this is the only foolproof solution )

2.2 seal on bottom of door detached from bottom of tank (only EVO3)
2.2.1 Reattach the seal to the bottom of the tank and, if not present, fit
the support springs code: C00140679 (see previous TN)

2.2 bottom spray-arm disconnected /faulty/ blocked (EVO3 + EOS)

2.2.1 check that the bottom spray-arm is not faulty/detached or blocked.

2.2 excess suds

2.2.1 The customer has placed rinse aid directly in the tank or during filling some has spilled from the
rinse aid dispenser
2.2.2 The customer is using a detergent unsuitable dishwasher use or faulty
2.2.3 leakage of rinse aid from the dispenser

2.2 door surround seal does not touch the bottom on one side (only EOS)
2.2.1 Fix the door surround seal
so that it touches the bottom at both the right and left. (photo10)
2.2.2 Check that the seal along the bottom of the door has not become detached,
if it has, replace the door

Modifications in production Only for LVS EOS:

In September 07 the height of the surround section was increased at the corners. This
makes fitting the seal easier.
The increased “hollow” here is no cause for concern because the seal between the surround and the tub is
guaranteed by the compression of the seal itself.

Management with after-sales service

Seal EVO3 code: C00141317 BE CAREFUL WITH SPARE PARTS MANAGEMENT!

Seal EOS code: C00256570

Fault code to be indicated on report

IN THE EVENT OF PRODUCT IN THE EVENT OF INCORRECT

MALFUNCTION INSTALLATION

X X XX X X XX

in accordance with in accordance with

particular case particular case
A E

M V

4/4
 TB001712
TECHNICAL BULLETIN DS122
PROFILE (UK Market ONLY) White / General
APPROVAL Rafal Rejdych
AUTHOR Cecilia Palazzi
ISSUE DATE 08/02/2018
VERSION / ISSUE 02
TITLE Rinse Aid Alarm LED does not go out
SUBJECT Exchange dispenser photo diode
Technical Failure Codes IND xx – xx – xx
WHP xx – xx – xx
CATEGORY / PLATFORM Dishwashing / 60cm
DEA700, DEA701, DEA603 Electronic
Platform

Exchange dispenser photodiode (recommended): C00516284

Symptom
Rinse Aid Alarm LED never goes out even if Dispenser Rinse Aid Reservoir is
full.

Service Solution
Exchange dispenser photodiode by using the following code:
C00516284 (488000516284) Dispenser Photodiode service part.

IMPORTANT! Make sure the appliance is disconnected from the power

supply before doing anything, otherwise take the necessary precautions
1
TECHNICAL BULLETIN TB 002604 EN

PROFILE (UK Market ONLY) White /General

APPROVAL Mario Lippera
AUTHOR Simone Servadei
LAST UPDATE 07/08/2020
VERSION / ISSUE 01
TITLE Water Softener Faulty Salt Sensor Pcb

CATEGORY Dishwasher
(Electronic) Platform 45cm, 60cm PLP2

Products Affected
45cm and 60cm Dishwashers produced from March 2020 having in service
BOM softener component C00386530

Problem
Missing salt Led stays on even if the customer properly filled salt and water
inside the water softener

Action
Fit service part C00641584. You have first to remove the existing PCB from the
water softener and then put instead the new PCB (C00641584).

C00641584

IMPORTANT! Make sure the appliance is disconnected from the power

supply before doing anything, other than when undertaking specified
1 observational checks
TECHNICAL BULLETIN TB002602 EN DS125 (UK only)

PROFILE (UK Market ONLY) White / General

APPROVAL Mario Lippera / RH
AUTHOR Simone Servadei / KR
LAST UPDATE 10/03/2021
VERSION / ISSUE 02
CATEGORY Dishwasher
(Electronic) Platform 60cm PLP2

Title: Door Seal Removed by Lower Basket

Products Affected -
60cm Dishwashers produced between Serial No’s. 4516xxx and 452104xxx.
(note - 12 digit serial code)

Problem -
Lower basket wheel contacts with the door seal, causing it to be pulled out of its’ locating
channel in the tub.

Action -
From Serial No. 4516xxxx to 452104xx fit service kit C00632576. This kit is made of
2 plastic clips (shown below) to add to the lower basket that will prevent contact with the
door seal.

After Serial No. 452104xx no action is required as the tub embossment dimension has
been adjusted by a few millimeters to solve the problem.

Fitting: The same part is used for left and right side, but are fitted in the opposite direction and
it is important they are fitted correctly. See the detail highlighted in Yellow below.
There are fitting instructions included with the kit.

IMPORTANT! Make sure the appliance is disconnected from the power

supply before doing anything, other than when undertaking specified
1 observational checks
TECHNICAL BULLETIN TB002607 EN UK Ref: DS128

PROFILE (UK Market ONLY) White / General

APPROVAL Mario Lippera / RH
AUTHOR Simone Servadei / KR
LAST UPDATE 30/03/2021
VERSION / ISSUE 02
CATEGORY Dishwasher
(Electronic) Platform 60cm PLP2

Lower Basket Falling Down from Track

Products Affected -
60cm PLP2 Dishwashers produced from 2016 to 2021

Problem -
Lower basket falling down from the track into the tub when being pushed in or pulled out .

Action -
Replace the Wheels and pins to the later type - refer to the table below for part numbers /
colour differences.

Each Kit is made of 8 wheels and 8 wheel supports (pins) for the Lower basket.
It is also possible to order single wheels and wheel support pins.

It is recommended to also examine the Lower Basket because the wheel wire it clips to can
bend when it falls.

If damage is obvious, or if the wheel kit has not been successful, then a new Lower Basket
should also be ordered along with the Wheel kit. Refer to Servicenet for basket part
numbers.

Colour Wheel Support Pin Kit Kit

quantity = 1 quantity = 1 Part No. Description
Light Grey C00666232 C00257142 C00674355 KIT 8 WHEELS + 8 PINS LIGHT GREY

Dark Grey C00666233 C00536679 C00674356 KIT 8 WHEELS + 8 PINS DARK GREY

Please Note – The previous service fix kit C00637324 is no longer available.

IMPORTANT! Make sure the appliance is disconnected from the power

supply before doing anything, other than when undertaking specified
1 observational checks
 Technical Bulletin
TB002799
Platform: Main board DEA700, DEA701 for VSM Profile: Blue
Plant: RADOMSKO Issue Date: 14/04/2021
Compiled by: Krzysztof Kupś
S/N Range: Main board DEA700, DEA701 for VSM
Authorised by: Antonio D’Angelo
Version: 1

F15 error code - the root cause proper recognition and solving procedure
Problem
The appliance shows a F15 fault.
Products Affected
Platforms where DEA700, DEA701 main board applied for variable speed motor (BLAC,BLDC)

Scope of this Technical Bulletin

This bulletin is aimed at to avoid an unjustified “ACU” exchange while drain and wash pumps may be damaged/work
improperly indeed.
Action

1) Disconnect an appliance by the power cord disconnection from the socket.

2) Check the sump whether clogged (extraneous objects, rests of food…) and drain hose whether kinked clean
the sump and correct the hose position if needed.
3) Disconnect the a drain pump from the sump socket and check the rotor and impeller (a missing wing, a
blocked rotor - to try to rotate by hand)

4) Check the connector connection to the drain pump (photo 1) & wash pump (photo 2) whether the connector
is fastened entirely inside the socket (according to the photo below). Push the connector to the end of the
socket. If after pushing you hear distinctive “click” it means that the connector was not fastened properly.

1 2

5) Start the “Rapid” cycle to check how the appliance works, if after this activity an issue doesn’t appear again,
problem is solved.
6) If problem is not solved exchange the wash pump

Ensure that the appliance is disconnected from the MAINS SUPPLY before
carrying out any work, other than when undertaking specific observation checks.
 Technical Bulletin
TB002798

Platform: 4001 Built-in, 4002 Freestanding, Profile: Blue

Issue Date: 20/07/2021
4003 Undercounter
Compiled by: Krzysztof Kupś
Plant: RADOMSKO Authorised by: Antonio D’Angelo
Version: 2
S/N Range: SN451920xxxx - till cancellation
The third rack jammes itself due to the hard working of wheels
Problem
The third rack jammes itself during pulling out due to the hard working of wheels

Products Affected
Since SN451920xxxx till cancellation

Scope of this Technical Bulletin:

To solve the problem the basket runners with wheels have to be swapped. In case of wire rack
replace the basket runners with wheels (according to the table).
In case of full plastic rack You need to swap the full plastic rack into wire rack (including components
in the table;trays,frame) and then swapp the basket runners with wheels (according to the table).
Table of the codes is on the next page

Action:
WIRE RACK SOLUTION

Old solution New solution

FULL PLASTIC RACK SOLUTION

Old solution New solution

Ensure that the appliance is disconnected from the MAINS SUPPLY before
carrying out any work, other than when undertaking specified observation checks.
SPARE PARTS CODE TABLE
DARK GREY SET

C00534437 TLR FLEXI FRAME ASSY,DARK GREY

C00683447 BASKET RUNNER - UPPER ITW LEFT DG (WITH WHEELS)

C00683449 BASKET RUNNER - UPPER ITW RIGHT DG (WITH WHEELS)

C00480943 LATERAL DARK GREY TRAY (USE TWO - LEFT & RIGHT IS THE SAME)

C00538439 CENTER DARK GREY TRAY

C00480946 TRAY LATERAL HOOK (USE TWO - LEFT & RIGHT IS THE SAME)

SILVER GREY SET

C00534529 TLR FLEXI FRAME ASSY,SILVER GREY

C00683452 BASKET RUNNER - UPPER ITW RIGHT SILVER GREY (WITH WHEELS)

C00683454 BASKET RUNNER - UPPER ITW LEFT SILVER GREY (WITH WHEELS)

C00299668 LATERAL SILVER GREY TRAY (USE TWO - LEFT & RIGHT IS THE SAME)

C00299667 CENTER SILVER GREY TRAY

C00304501 TRAY LATERAL HOOK (USE TWO - LEFT & RIGHT IS THE SAME)

2
Technical Bulletin
TB002812 UK Code: DS130
PROFILE White / General
APPROVAL Antonio D’Angelo / RH
AUTHOR Krzysztof Kupś / KR
LAST UPDATE 03/09/2021
VERSION / ISSUE 01
CATEGORY Dishwasher
PLATFORM All Radomsko built 45cm and 60cm Models

Error Code F01 - Water Leakage into the Base – Checking for Leaks
Problem
Water leakage into the base is detected by the float switch and shown on the display as F01.

Products Affected - All products are affected.

Scope of this Technical Bulletin

The scope is to help identify some of the more common areas of leaks that can result in F01.

Action:
1. Disconnect the appliance from the power supply.
2. Tilt the appliance about 30° in order to have hands free access to the latches securing the base flap. (Photo 1.)
(CAUTION: You must not tilt the appliance more than 45° as there is risk of electrical component flood).
Unclip the latches to check for the presence of water in the base and perform a visual inspection of the following
components: Drain Pump, Sump, Main Motor, Alternating Diverter Valve, Drain Hose, Clamps, Rubber Pipes
(Photo 2). Unfasten float switch and check the presence of foreign objects under the float switch. Ensure the
connector is pushed fully home. (Photo 3).
Photo 3

Connector

Float Down Float Up

Photo 1 Photo 2

- If a leak is detected, swap the faulty component and/or adjust any poor connections (pipes,clamps etc.…).
- If water is present but a leakage source has not been detected, dry the appliance base and use the leak
detection sheet (instructions below) in order to perform a functional leakage test.
- If water is not present and a leakage source has not been detected, and use the leak detection sheet in order to
perform a functional leakage test.
The leak test paper is reusable (more than 20 usages for 1 sheet)
LEAK DETECTION SHEET for 60 CM - C00728071 LEAK
DETECTION SHEET for 45 CM - C00728072
TO PERFORM A LEAKAGE TEST:
Place the paper on the base flap, refit the base and ensure the appliance is returned to its upright position.
Run the Intensive cycle to fill the machine - approximately 10 minutes. After the cycle has run for a few
minutes longer, check the paper condition. It should be possible to identify the leakage source area from water
stains on the paper and repair as necessary.
If no leaks are found you should consider testing the float switch for continuity or as a final option replacing the
power board. Potential leakage sources have been listed on the second page. See page 2.

IMPORTANT! Make sure the appliance is disconnected from the power supply before
doing anything, other than when undertaking specified observational checks Page 1 of 2
POTENTIAL LEAKAGE SOURCES TABLE TB002812 || DS130

Main motor / Heater

- body (cracks + holes)
- rubber hose (splits + clamping)
- hose clamp (position / fitting)
- heater clamp (position / fitting)

Drain pump
- body (cracks + gap between
pump & socket)

- O ring Gasket (correct location)

Alternator
- screws [x3] (tightness or missing)
- Clamp (position / fitting)
- body (cracks / holes)
- O rings [x3] (missing or damaged)

Rubber diverter hose

- screws [x4] (missing or loose)
- hose (splits / deformed)
- clamp (position / fitting)

Drain tube
- sump socket (fitting / gaps)
- examine entire tube (damage)
- O rings [x2] (missing or damaged)

Sump
- Seal (damage)
- Screws (missing / tightness)

Inlet Valve + Valve tube

- Valve body (damage / cracks)
- Hose (splits / heat damage)
- Clamp (position / fitting)

Water softener + Air break

- Splits in plastic bodies or welded seams
- Large nut inside tub (tightness / position)
- (missing or damaged items:)
O rings [x3] ~ air break to softener
O rings [x1] ~ tub to air break
O rings [x1] ~ tub to softener
O rings [x1] ~ valve to softener

IMPORTANT! Make sure the appliance is disconnected from the power supply before
doing anything, other than when undertaking specified observational checks
Page 2 of 2