www.adec.
om
AIR DUCT & FITTING
Misfah Industrial Area Sales: (+968) 91946088 [email protected]
P.O. Box: 134, P.C. 134, Factory: (+968) 91769430
[email protected]Jawharat, Al Shatti, Muscat Tel: (+968) 2413 9777
[email protected]Sultanate of Oman Fax: (+968) 2413 9555
[email protected] Pg 2 | ADEC RECTANGULAR DUCT & FITTINGS
RECTANGULAR DUCT
& FITTINGS
DESCRIPTION
ADEC single wall duct & fittings is factory fabricated conforming to SMACNA
& DW 142/144 and supplied with factory applied sealant on all longitudinal
joints.
ADEC Rectangular ducts can be supplied fully assembled in various
materials like:
Galvanized steel in accordance to ASTM A527/653 zinc coating grade of
G90 Z27 lock forming quality
Stainless steel in accordance to ASTM A 240/480 with various grades like
304, 316L
Aluminum metal in accordance to ASTM B209
Black mild steel in accordance to ASTM A527
Flange can be accustomed according to client specification base on accepted
standard;
Plain end S & C Drives Self Flange
Slip on Flange TDF Flange Angle Frame
Thickness may vary from 0.56 mm up to 3 mm thick with a standard length of
1200 mm
Pg 3 | ADEC RECTANGULAR DUCT & FITTINGS
TH
ENG
A RD L
AND
MM ST
1200
HEIGHT
BEADING
W
ID
TH
LONGITUDINAL SEAM
305 MM
SEAMS
PITTSBURGH SEAMS
Small Pittsburgh up to 22 Gauge
1/2’ Largest Pittsburgh up To 18 Gauge
BEADING
Maximum 150 mm first bead from the end and 305 mm standard beading in equal distance spacing up to
18 gauge steel.
Beading is only for standard duct length of 1200 mm (4 feet)
Pg 4 | ADEC RECTANGULAR DUCT & FITTINGS
PARALLEL FLOW REDUCER
OFFSET RADIUS BEND WITH SPLITTER
RECTANGULAR TO ROUND TRANSITION CONNECTION / TAKE OFF 90
Pg 5 | ADEC RECTANGULAR DUCT & FITTINGS
SLIP & DRIVE (S&C) DUCT SYSTEM WITH CLEATS
Hemmed Slip and Drive S&C is a self-
clamping type duct connection system
used generally for low pressure duct
work which eliminates labor and
material costs associated with sealing
of your duct work. Available in 25mm
Hemmed ‘S’ cleat and 30 mm Drive
Cleat , roll formed from 24g/22g GI
sheets
PROFILE OF S&C DUCT
Pg 6 | ADEC RECTANGULAR DUCT & FITTINGS
35mm TDF INTEGRAL FLANGE,
CORNER & CLEAT SYSTEM
GASKET
GROOVE FLANGE GASKET
CORNER TDF is flanging system that consists of
DUCT
DUCT
GASKET
GROOVE forming a flange profile on the duct
FLANGE PROFILE ends,thus made out of a sheet from
which the duct is fabricated.TDF is a 4
bolt duct connection system that
CLEAT
CARRIAGE BOLT
DUCT eliminates time wastage.Rather than
CLEAT FLANGED
NUT
using seperate connectors to assemble
your system,TDF flanges are roll formed
from duct during manufacturing
process.
This connection minimizes leakage and installation costs. These TDF flange eliminates the additional internal sealing around
the edges of duct & thereby saves the labour & material.
FEATURES PROFILE OF 35MM TDF INTEGRAL
FLANGE
Highly accurate flange profiles and components ensure ease
if fitting and high quality assembly .
A Recessed grove on radial groove on cornor pieces
for proper gasket seating
Snap fit cornor pieces to allow easy fitting at sites.
Flange size is 35mm
PROFILE OF 35MM TDF INTEGRAL
FLANGE DUCT & CLEAT
A
Pg 7 | ADEC RECTANGULAR DUCT & FITTINGS
SLIP ON FLANGE
DUCT
FLANGE GASKET
FLANGE SYSTEM 20 FLANGE SYSTEM 30
FLANGE SYSTEM 40 DRIVE SLIP CLAMP WITH SCREW
Pg 8 | ADEC RECTANGULAR DUCT & FITTINGS
ACOUSTIC LINER INSTALLATION DETAILS
Insulation Guard Insulation Guard
Liner (Channel) 24 Gage Liner (Channel) 24 Gage
Duct Rivets Duct Rivets
Insulation Guard
Liner (Zee) 24 Gage
Liner
Duct Rivets
Pin
Alternate Folded Corner
Insulation Guard
Fixing by Rivets
Stick up Pin
ACOUSTIC LINER CAN BE FITTED AS
25 MM ROLL 24/32/48 KG/M3 DENSITY
25 MM SLAB 32/48/64 KG/M3 DENSITY
50 MM ROLL 24/32/48 KG/M3 DENSITY
50 MM SLAB 32/48/64 KG/M3 DENSITY
Misfah Industrial Area Sales: (+968) 91946088
[email protected]P.O. Box: 134, P.C. 134, Factory: (+968) 91769430
[email protected]Jawharat, Al Shatti, Muscat Tel: (+968) 2413 9777
[email protected]Sultanate of Oman Fax: (+968) 2413 9555
[email protected]
