ESP 22-37 Series

Screw Compressors

TM
COMPLEX NEEDS - SMARTER SOLUTIONS
 Reliability to
maximize uptime
Gardner Denver’s Best Solution
from 22 up to 37 kW

The ESP fixed speed screw compressors are designed to meet the high requirements which the
modern work environment and machine operators place on them. As a result, our belt driven ESP 22,
ESP 30 and ESP 37 compressors are extremely energy efficient, quiet, reliable, easy to use, possess
long operating time and deliver optimal air quality.

For these fixed speed compressors, we have generated easy-to-use and accurate drive systems and
greatly invested on developing optimal cooling and ventilation. All these features are of direct benefit
to the users. Maintenance of these compressors is facilitated by having an enclosure with six doors.
Number of special options available makes ESP fixed speed compressors the right choice for producing
high-quality compressed air for a wide range of needs.

These compressors continue to further strenghten Gardner Denver’s success story as a world leader
in compressors.
 Quiet
room and associated piping.
From 65 dB(A) as standard
Performance of the new ESP fixed speed screw compressor is
The cleverly engineered enclosure is safe and compact, and further enhanced by a new cooling system that features separate
absorbs noise effectively without the need for any additional cooling air flow paths without influencing cooling efficiency.
parts. Standard package noise level is only 65 - 72 dB (A).
As a result normal conversation can take place right next to the
Low noise level allows you to install the ESP compressors on running compressor.
the work floor and thus saves the cost of a separate compressor

Controlling and monitoring your

compressor station

information such as pressure, temperature, operating hours,etc.

while the other two lines display advisory messages, shutdown
messages, recommended part numbers and service contact
information.

It is the same controller used in Gardner Denver’s VS series,

but programmed for load / no load operations with fixed speed
compressors.

Communication and Sequencing

The optional communication module allows the AirSmartTM units

to talk to each other. This isn’t just an hour-balancing, on/off
sequencing scheme. Our controller allows the system to truly
optimize efficiency because it knows the capabilities of other
Clear text indicator display machines and orchestrates their operation. The communication
module also allows remote monitoring of the VS and ESP units.
The controller has a four line display with menus and tactile This application provides better energy efficiency in part load
buttons for easy navigation. Two lines display operating operations.
 Advanced Design
Excellent Performance

The belt driven ESP 22, ESP 30 and ESP 37 are fitted
with the unique Gardner Denver inlet valve. The
extremely low internal pressure drop, combined with
the proven ENDURO ® Plus 12 air end are a solid
guarantee for excellent performance.

The integrated TEMPEST® 12 unit with cyclone pre-

separation will provide you with the lowest possible
residual oil content.

Optimised Cooling System

Upgraded after-cooler provides cool air to the after-

treatment equipment.

The cooling air can be easily ducted.

Maximum flexibility
You will appreciate the choice of special options
available
Saving space

Based on several years of product knowledge, we have The optional integral refrigerated dryer reduces both
developed a wide range of special options available for extra installations and the required floor space, making
your benefit. Our special options meet your requirements the compressor easier to install.
and are an answer for all your complex needs.
• Optimised cooled
• Monitored by the controller
Producing optimal pressure • Low installation costs
• Same dimension of the compressor with or
We offer drives for 7.5 bar, 8.5 bar, 10 bar and 13 bar without integrated dryer.
maximum operating pressure plus the low pressure
model at 4 bar.

Fluid requirements

Gardner Denver AEON lubricants ensure longer lifetime

of your compressor and meets all requirements:

• Mineral lubricants
• Foodgrade lubricant
• Synthetic lubricant

Heat recovery system

Our +W heat recovery system guarantees energy savings

for your company.
 Service is easier
than ever before
Effortless and quick Aftersales products

The design of these packages assures the service points Gardner Denver carries a full line of after sales products
are readily accessible. The enclosure side doors are hinged to meet all your requirements. By using original spare
and removable to allow complete access to all service parts, you will save both time and money in the long term.
points. The reduced number of moving parts also lowers
maintenance costs.

Automatic belt tensioning by gravity ensures long life time

for the belts.

Support Network

Gardner Denver has a wide network of authorised

distributors available whenever needed to keep your
compressors in top form.

We are committed to stocking components to support

your compressed air system needs.
 Your benefits at a glance

• Advanced AirSmart™ Control System • Great Performance

• Serviceability • Maximum Flexibility
• Modern Design • Optional connectivity &
• Low Noise level sequencing function

Technical Data
Gardner Maximum Capacity at Motor power Net Noise Size
Denver target pressure* working pressure** weight level *** (Length x Width
Model x Height)
bar psig m3/min cfm kW hp kg dB(a) mm
ESP 22 7.5 110 3.84 136 22 30 840 65 – 67 1651 x 887 x 1750
8.5 125 3.35 118
10 145 3.14 111
13 190 2.50 88
ESP 30 7.5 110 5.24 185 30 40 905 68 1651 x 887 x 1750
8.5 125 4.60 163
10 145 4.34 153
13 190 3.71 131
ESP 37 7.5 110 6.31 223 37 50 925 71 – 72 1651 x 887 x 1750
8.5 125 5.63 199
10 145 5.48 194
13 190 4.70 166
o
* For RD models max. pressureo
is 0.25 bar less. Pressure dew
o
point of integrated dryer at reference conditions: +3 C. Reference conditions: intake air
temperature for dryer: +35 C, ambient temperature: +25 C.
** Capacity and Power measurements according to ISO 1217, ed. 3, Annex C -1996 test code and the following working pressures are used: 7.5 bar models
at 7 bar, 8.5 bar models at 8 bar, 10 bar models at 9 bar and 13 bar models at 12 bar.
*** Noise values determined according to ISO 2151 and ISO 3744; Tolerance ±2 dB (KpA).

Standard equipment • Automatic re-start after power cut

• Air inlet filter • Automatic belt-tensioning system
• Fully automatic capacity control: full load, off-load, • Epoxy powder painted enclosure
idle run and formed stops • After cooler and moisture separator with automatic drain
• Gardner Denver AirSmart™ Controller • Three-way mixing oil thermostat
• Easy to use operator interface • Integrated TEMPEST® compressor unit with ENDURO® Plus air end
• Multiple languages
• Y/D starter Optional extras
• Main switch • Pre-filter for air intake
• TEFC electric motors: IP55, F-class insulation, • Additional I/O ports
thermistor protection • Low pressure model
• Emergency stop • Special voltages
• Safety devices for • Multiple AEON lubricant options
- high motor temperature • Zero loss drain
- high compressor temperature • Communications / sequencing module
- high compressor pressure • Integrated RD dryer
• Alarms for
- oil filter The refrigerant used in the integrated dryers fulfills the EC norm
- inlet filter No 2037/2000 requirements
- oil separator elements • +W heat recovery system
- motor overload
- compressor overheat (alarm at 100 °C and tripping at 115 °C) Auxiliary equipment
- service interval • MiniPilot multi-compressor controller for 2-3 equal size
• Safety valve compressors
• Running condition indicators: • MultiPilot multi-compressor controller for several compressors
• Compressed air after treatment products
Gardner Denver • ESP 22-37 • GB • 0307 • 4000 • Printed in Finland by Hermes • jps-mainos.fi

- pressure
- temperature
- hour meter; total running hours, full load

For additional information please contact your local representative or

Gardner Denver Oy • P.O.Box 516 • FI-33101 Tampere • Finland

Telephone +358 205 44 141 • Telefax +358 205 44 140
[email protected] • www.gardnerdenver.fi

Specifications subject to change without notice.

Copyright 2007 Gardner Denver.