JIEJIE MICROELECTRONICS CO. , Ltd.

T1635H-6C 16A TRIAC Rev.A.1.0

DESCRIPTION:
The T1635H-6C triac is suitable for general purpose AC
switching. It can be used as an ON/OFF function in
applications such as heating regulation, induction motor
starting circuits, for phase control operation in light dimmers,
motor speed controllers. Compared to traditional triacs,
T1635H-6C provides a very high switching capability up to
junction temperatures of 150°C. From T2 terminals to
external heatsink. Package TO-220C is RoHS compliant.

MAIN FEATURES
Symbol Value Unit
IT(RMS) 16 A
VDRM /VRRM 600 V
IGTⅠ/Ⅱ/Ⅲ 35/35/35 mA

ABSOLUTE MAXIMUM RATINGS

Parameter Symbol Value Unit
Storage junction temperature range Tstg -40-150 ℃
Operating junction temperature range Tj -40-150 ℃
Repetitive peak off-state voltage (Tj=25℃) VDRM 600 V
Repetitive peak reverse voltage (Tj=25℃) VRRM 600 V
RMS on-state current (TC≤127℃) IT(RMS) 16 A
Non repetitive surge peak on-state current
160
(full cycle , tp=20ms , Tj=25℃)
ITSM A
Non repetitive surge peak on-state current
176
(full cycle , tp=16.6ms , Tj=25℃)
I2t value for fusing (tp=10ms , Tj=25℃) I2t 128 A2s
Critical rate of rise of on-state current
dI/dt 100 A/μs
(IG=2×IGT , f=100Hz , Tj=150℃)
Peak gate current (tp=20μs , Tj=150℃) IGM 4 A
Average gate power dissipation (Tj=150℃) PG(AV) 1 W
Peak gate power PGM 10 W

TEL：+86-513-68528666 http://www.jjwdz.com
1
T1635H-6C JieJie Microelectronics CO. , Ltd.
Peak pulse voltage
Vpp 4 kV
(Tj=25℃; non-repetitive,off-state;FIG.7)

ELECTRICAL CHARACTERISTICS (Tj=25℃ unless otherwise specified)

Symbol Test Condition Quadrant Value Unit
IGT Ⅰ-Ⅱ-Ⅲ MAX. 35 mA
VD =12V RL =33Ω
VGT Ⅰ-Ⅱ-Ⅲ MAX. 1 V
VD =VDRM Tj =150℃
VGD Ⅰ-Ⅱ-Ⅲ MIN. 0.2 V
RL =3.3KΩ
Ⅰ-Ⅲ 50
IL IG =1.2IGT MAX. mA
Ⅱ 70
IH IT =500mA MAX. 35 mA
dV/dt VD=400V Gate Open Tj =150℃ MIN. 1500 V/μs
(dI/dt)c (dV/dt)c=20V/μs, Tj=150℃ MIN. 15 A/ms
ton IG=40mA IA=200mA IR=20mA 8
TYP. μs
toff Tj=25℃ 60

STATIC CHARACTERISTICS
Symbol Parameter Value(MAX.) Unit
VTM ITM =22.5A tp=380μs Tj=25℃ 1.4 V
VTO Threshold voltage Tj=150℃ 0.75 V
RD Dynamic resistance Tj=150℃ 27 mΩ
IDRM Tj=25℃ 5 μA
VD =VDRM VR =VRRM
IRRM Tj=150℃ 1.5 mA

THERMAL RESISTANCES
Symbol Parameter Value Unit
Rth(j-c) junction to case (AC) 1.1 ℃/W
Rth(j-a) junction to ambient (AC) 60 ℃/W

TEL：+86-513-68528666 http://www.jjwdz.com
2
T1635H-6C JieJie Microelectronics CO. , Ltd.

ORDERING INFORMATION

T 16 35 H -6 C
Triacs
IT(RMS):16A C:TO-220C

35:IGT1-3≤35mA 6:VDRM /VRRM≥600V

High junction temperature

MARKING

T1635H
6C
XXX XXX
XXX XXX
Year Production
Month Code

TEL：+86-513-68528666 http://www.jjwdz.com
3
T1635H-6C JieJie Microelectronics CO. , Ltd.
FIG.1 Maximum power dissipation versus RMS FIG.2: RMS on-state current versus case
on-state current temperature
P(W) I T(RMS)(A)
30 18

16 127℃
25
14

20 12

10
15
8

10 6

4
5
2
0 0
0 5 10 15 20 0 25 50 75 100 125 150
I T(RMS)(A) TC(℃)

FIG.3: Surge peak on-state current versus FIG.4: On-state characteristics

number of cycles
ITSM(A) I TM(A)
180
Tc=25℃,tp=20ms,one cycle,sine Tj=25℃ typ
Tj=25℃ max
150 100 Tj=150℃ typ

120

90
10
60

30

0 1
1.E+0 1.E+1 1.E+2 1.E+3 1.E+4 1.E+5 0 0.5 1 1.5 2 2.5 3 3.5
Number of cycles VTM(V)

FIG.5: Non-repetitive surge peak on-state current FIG.6: Relative variations of gate trigger
for a sinusoidal pulse with width tp<20ms, and current, holding current and latching current
corresponding value of I2t (dI/dt<100A/μs) versus junction temperature

I TSM(A), I 2t(A2s) I GT,I H,IL(Tj)/IGT,IH,IL(Tj=25℃)

3
IGT(I/II)&IH
1000 I TSM IGT(III)
2.5
dI/dt IL

I 2t 2
100
1.5

1
10

0.5

1 0
0.01 0.1 1 10 -40 -20 0 20 40 60 80 100 120 140 160
tp (ms) Tj(℃)

TEL：+86-513-68528666 http://www.jjwdz.com
4
T1635H-6C JieJie Microelectronics CO. , Ltd.
FIG.7：Test circuit for inductive and resistive loads to IEC-61000-4-5 standards
IEC61000-4-5 Standards
Surge Generator
1.2/50μS voltage surge
8/20μS current surge

RGen
2Ω
Filtering Unit Load Model

R L

2Ω 6.5μH

AC
INPUT RG 300Ω

SHAPING AND SOLDERING PARAMETERS

Refer to《Instructions for installation of plastic-sealed in-line power devices》released by JieJie

TEL：+86-513-68528666 http://www.jjwdz.com
5
T1635H-6C JieJie Microelectronics CO. , Ltd.

ORDERING INFORMATION
IGT(mA)
Voltage Base qty. Delivery
Order code Package
VDRM/VRRM (V) (pcs) mode
Ⅰ-Ⅱ-Ⅲ

T1635H-6C 600 35 TO-220C 50 Tube

Document Revision History

Date Revision Changes
Apr.10, 2023 A.1.0 Last updated

TEL：+86-513-68528666 http://www.jjwdz.com
6
T1635H-6C JieJie Microelectronics CO. , Ltd.

PACKAGE MECHANICAL DATA

Dimensions
Ref. Millimeters Inches
m
5m
.6 Min. Typ. Max. Min. Typ. Max.
-3
. 45
φ3
E A A 4.40 4.60 0.173 0.181
C2
B 0.70 0.90 0.028 0.035
C 0.45 0.60 0.018 0.024

F
L3

C2 1.25 1.35 0.049 0.053

C3 2.20 2.60 0.087 0.102
D

D 8.90 9.90 0.350 0.390

H

E 9.90 10.3 0.390 0.406

L1

C3
L2 F 6.30 6.90 0.248 0.272
G 2.40 2.70 0.094 0.106
H 28.0 29.8 1.102 1.173
L1 2.70 3.30 0.106 0.130
B C
G L2 1.14 1.70 0.045 0.067
L3 2.65 2.95 0.104 0.116

DELIVERY MODE
3

printing area

3.8

TUBE INNER BOX

PACKAGE OUTLINE PER CARTON
(PCS) (PCS)

TO-220C TUBE 50 1,000 5,000

TEL：+86-513-68528666 http://www.jjwdz.com
7
T1635H-6C JieJie Microelectronics CO. , Ltd.

Information furnished in this document is believed to be accurate and reliable. However,

Jiangsu JieJie Microelectronics Co., Ltd. assumes no responsibility for the consequences
of use without consideration for such information nor use beyond it. Information mentioned
in this document is subject to change without notice, apart from that when an agreement is
signed, Jiangsu JieJie complies with the agreement.
Products and information provided in this document have no infringement of patents.
Jiangsu JieJie assumes no responsibility for any infringement of other rights of third
parties which may result from the use of such products and information. This document
supersedes and replaces all information previously supplied.
is a registered trademark of Jiangsu JieJie Microelectronics Co., Ltd.
Copyright ©2023 Jiangsu JieJie Microelectronics Co., Ltd. Printed All rights reserved.

TEL：+86-513-68528666 http://www.jjwdz.com
8