10 KG Aquaproof Pu Waterproofing Chemical
10 KG Aquaproof Pu Waterproofing Chemical
Rockhard
ROCKHARD POLYCOATS PVT. LTD.
Waterproofing
System
Uses-Exterior RCC surface, Masonry walls or Uses-Building Roofs/Terrace- Flat & slope,
facades, Stone walls, Asbestos, China mosaic Over existing cementatious waterproof
tiles, Sloping roofs. treatments like brick-batcoba, concrete screed,
Packaging: 5kg, 10kg, 20kg and acrylic coatings
Coverage-30-35sq.ft/kg/2 coats (depending on Packaging: 5kg, 10kg, 20kg
porosity of surface) Coverage-15-20sq.ft/kg/coats (depending on
porosity of surface)
ROCKGUARD 250 is a premium, liquid- applied, Aquapruf Pu1 is a premium, water bases PU D
highly permanent elastic, cold applied and cold liquid-applied, highly permanent elastic, cold
curing,one component polyurethane membrane applied and cold curing, one component
used for long-lasting waterproofing. Use on polyurethane membrane used for long-lasting
most waterproofing application as roof, balconies, waterproofing. Use on most waterproofing
terraces,etc. application as roof, balconies, terraces, etc.
Packaging: 5kg, 10kg, 20kg Packaging: 5kg, 10kg, 20kg
Coverage- 1,4–2,5kg/m2 applied in two or three Coverage-15-20sq.ft/kg/coats (depending on
layers porosity of surface)
Single Component polymer for cement based Elastomeric polymer modified cementatious
waterproof coating. Provides an effective and waterproof coatings, Used for waterproofing
economical method of waterproofing to concrete of existing and new structure. Also suitable for
and masonry surfaces, by mixing with cement all types of structures including those situated in
and application by brush. coastal environment.
Roof basements, watertanks etc.
Packaging: 1Ltr,5Ltr,10Ltr,20,200Ltr
Packaging: 5kg, 10kg, 20kg
It is used for waterproofing of concrete and sand- Seal-N-Cool is single solution for heat reducing &
cement mortar used in basements, roof slabs and ‘Energy Saving’, waterproofing and anti fungal
screeds, water retaining structures, external characteristics, acrylic emulsion based elastomeric
plastering, bathrooms and balconies, water tanks, waterproof coating
sumps and drains, etc. Packaging: 5kg, 10kg, 20kg
Packaging: 1Ltr, 5Ltr, 20Ltr, 50Ltr, 200Ltr Coverage: 10-20sq.ft/per1coat./Kg
w w w. r o c k h a r d p o l yc o a t s . c o m
Rockhard Waterproofing System
ROCKSEAL Pu25 is an elastic, single component, To treat concrete again stingress of water and
gun-grade, moisture curing polyurethane sealant water borne salts .To minimize efflorescence in
specifically developed to be used in building masonry structures.To create water repellency
facade expansion joints where high elasticity is in bricks and concrete blocks
required The product is suitable for sealing joints Packaging: 1Ltr, 5Ltr, 20Ltr
in pre-cast elements, external walling, curtain
walling and cladding, panel walls, window and Coverage- 5-9Sqmtr/Ltr
door perimeter sealing etc.
Thin layer jointing mortar. The unique and Bitumen Modified Elastomeric Ready to Use Cold
advance chemical combination enables this applied Waterproof coating For use in Bitumen
mortar to be more compact, thinner and stronger applied areas Retaining walls Wet areas Podiums
8.5SqMtr with average thickness of 3mm for a for excellent waterproofing with screed protection
bag of 30kg for block size 600X200X150mm Coverage- 30-35sq.ft per Kg for two coats
For Thin set jointing between blocks AAC/CLC
Packaging: -30, 40kg
Rockguard Antihack
Hacking On Concrete as a Bonding agent