www.selvoline.

com
[email protected]

�������
���������
T 13 - 2005
WITH LOAD CAPACITY PARAMETERS

SELVOLINA PRODUCES:
STAGES, DANCE FLOORS, MULTIPURPOSE FOOT BOARDS, ROOF COVERS, TRUSSES
FOR FURNISHING, EVENTS AND SHOWS, BIG SCREENS, TRIBUNES, GAZEBOS, TUNNELS, BENCHES,
LAP-DANCE CUBES AND CAGES, SPECIAL STRUCTURES, POLITICAL ADVERTISING PANELS.
With the present catalogue, Selvoline would like to present its vast choice of steel
trusses which are studied for whoever needs trustworthy and long lasting products.
To satisfy every request, many kind of surface handlings for external or internal
environments are available: from the heat galvanization to the polyester coating, from
cataphoresis to epoxy powders coating available in different colors. The application
fields for the Selvoline trusses are numerous. For instance they can be used in
shops, various public places, theaters, discotheques, for the installation of fair stands
and showrooms or to realize lighting or bearing structures. Moreover Selvoline is able
to meet any particular request designing and realizing special structures and
personalized jobs.

T 13 - 2005
 ��������������

�������������������������������������������
����������������������������������������������

3
Portal 22 m:
Pillars in aluminum alloy
Anticorodal 20x20 cm
Truss 64x64 cm
(high tensile steel)
is being tested in the works

����
�������������

4
 INDEX
Before consulting the following catalogue, please read carefully the general
terms of sales indicated both on the pricelists and on the internet site
www.selvoline.com
Every order will undergo the above mentioned general terms of sales.

Surface handlings page 6

Trusses page 7

Trusses accessories page 18

Pillars page 21

Lighting stands page 25

Assembling layout page 26

Examples page 35

T 13 - 2005
 SURFACE HANDLINGS

Every handling is studied by the Selvoline Team according to the material used, the location and the utilisation.
- electrolytic galvanisation (silver aluminum color);
- hot dip galvanisation (silver oxidised color);
- electrolytic galvanisation + polyester coating;
- cataphoresis + polyester coating;
- hot dip galvanisation + polyester coating;
- for external enviroments: special sandblasting handling + arc spraying with melted zinc + coating;
- standard colors: semi dull black RAL 9005 - aluminum grey RAL 9006 or similar, texturised ancient iron (micaceous color);
- on demand: dark green RAL 6005, white RAL 9016 (delivery times slightly prolonged);
- other colors: only for medium-big quantities.
N.B. The polyester coating on the galvanisation is done by specialized companies who guarantee its duration in time (epoxy powder coating)
Clarifications on the thermosetting powders:
- coating with thermosetting powders, epoxy, epoxy-polyester ideal for indoors;
- coating with thermosetting powders, in polyester, ideal for outdoors.
N.B. from one lot to the other the shades may vary
Hot dip galvanisation, depending on the period of stocking, may vary in brightness. Tone differences will decrease after few months of external exposure
and disappear completely after one year.

MATERIAL FOR INTERNAL ENVIROMENTS AND TEMPORARY INSTALLATIONS: ELECTROLYTIC

GALVANISED 8.8 STEEL NUTS AND BOLTS
MATERIAL FOR EXTERNAL ENVIROMENTS AND PERMANENT INSTALLATIONS: HOT DIP GALVANISED
8.8 STEEL NUTS AND BOLTS

For non standard measurements and colors or for any other request, our Sales Dept is at your complete disposal.

SPECIFICATIONS ON COVERING CLOTHS

WITH THE EXCEPTION OF A DIFFERENT WRITTEN AGREEMENT, WE SUPPLY COVERING AND LATERAL CLOTHS IN FIRE RETARDANT PVC
CLASS 2 OF MORE THAN 600 g/m², WITH CONCERNING CERTIFICATION.

COLORS SUGGESTED BY THE SELVOLINE TEAM:

for all the structures: ivory color because it makes less evident the powder deposit.

Notes:
If different colors from the standard ones are requested:
- for big quantities it is possible to have any color (delivery times remain unchanged);
- for minimum quantities it is possible to have any color (delivery times slightly prolonged).

6 T 13 - 2005
 TRIANGULAR TRUSSES
standard production - quick delivery
built in steel - complete with galvanised 8.8 steel nuts and bolts

cod. 16 cod. 10 cod. 11

- side: 12,5 cm - side: 20 cm - side: 25 cm

- pylon's parallel pipe: ø 14 mm - pylon's parallel pipe: ø 14 mm - pylon's parallel pipe: ø 18 mm
- available length: - available length: - available length:
. 50 cm - 1,5 kg . 50 cm - 1,7 kg . 50 cm - 2,5 kg
. 100 cm - 2,4 kg . 100 cm - 2,7 kg . 100 cm - 3,8 kg
. 150 cm - 3,3 kg . 150 cm - 3,7 kg . 150 cm - 5,1 kg
. 200 cm - 4,2 kg . 200 cm - 4,7 kg . 200 cm - 6,4 kg
. 225 cm - 4,7 kg . 225 cm - 5,2 kg . 225 cm - 7,1 kg
. 250 cm - 5,1 kg . 250 cm - 5,7 kg . 250 cm - 7,7 kg
- operable handlings: - operable handlings: - operable handlings:
. electrolytic galvanisation; . electrolytic galvanisation; . electrolytic galvanisation;
. heat galvanisation; . heat galvanisation; . heat galvanisation;
. cataphoresis; . cataphoresis; . cataphoresis;
. coating. . coating. . coating.
- max insertable pipe: - max insertable pipe: - max insertable pipe:
ø 55 mm, 45x45 mm ø 85 mm, 70x70 mm ø 100 mm, 80x80 mm

17,5 22
11
12,5 20 25

maximum loads at page 8

cod. 15 cod. 52

- side: 30 cm - short side: 40 cm

- pylon's parallel pipe: ø 30 mm - higher pylon's parallel pipe: ø 60 mm
- available length: - lower pylon's parallel pipe: ø 40 mm
. 100 cm - 10,4 kg - available length:
. 150 cm - 14,1 kg . 200 cm - 30,1 kg
. 200 cm - 17,8 kg . 250 cm - 36,1 kg
. 250 cm - 21,5 kg . 300 cm - 42,2 kg
- operable handlings: - operable handlings:
. electrolytic galvanisation; . electrolytic galvanisation;
. heat galvanisation; . heat galvanisation;
. cataphoresis; . cataphoresis;
. coating. . coating.
- max insertable pipe: - max insertable pipe:
ø 120 mm, 100x100 mm ø 180 mm, 150x150 mm

45
26

30 40

7 T 13 - 2005
 MAXIMUM LOADS
TRIANGULAR TRUSSES

Equally distributed load applied on the knots of both

lower pylon's parallel pipes.

Trusses have been assembled like showed at page 26.

The following data has been obtained from tests done by

Selvolina. It is, therefore, to be taken as approximate.

Triangular Truss side 12,5 cm - cod. 16 Triangular Truss side 30 cm - cod. 15

maximum equally maximum equally
with reinforcing with reinforcing
Spanning - meters distributed load per Spanning - meters distributed load per
plates plates
meter meter
4 (2+2) no 35 kg 4 (2+2) yes 300 kg
5 (2,5+2,5) no 10 kg 6 (2+2+2) yes 200 kg
6 (2+2+2) no 5 kg 8 (2+2+2+2) yes 85 kg
10 (2+2+2+2+2) yes 45 kg
12,5 (2,5+2,5+2,5+2,5+2,5+2,5) yes 15 kg
Triangular Truss side 20 cm - cod. 10
maximum equally
with reinforcing
Spanning - meters
plates distributed load per Triangular Truss side 40 cm - cod. 52
meter
4 (2+2) no 70 kg maximum equally
with reinforcing
Spanning - meters distributed load per
4 (2+2) yes 80 kg plates
meter
6 (2+2+2) no 20 kg
6 (2+2+2) yes 25 kg
yes load tests are being
8 (2+2+2+2) 8 kg
carried out

Triangular Truss side 25 cm - cod. 11

maximum equally
with reinforcing
Spanning - meters distributed load per
plates
meter
4 (2+2) no 120 kg
6 (2+2+2) no 45 kg
8 (2+2+2+2) yes 15 kg
10 (2+2+2+2+2) yes 8 kg

8 T 13 - 2005
 CURVES FOR TRIANGULAR TRUSSES
standard production - quick delivery
built in steel - complete with galvanised 8.8 steel nuts and bolts

FLAT 90° CURVE 90° CURVE INTERNAL PITCH

cod. 16.01 truss with side12,5 cod. 16.01/A truss with side 12,5
cod. 10.01 truss with side 20 cod. 10.01/A truss with side 20
cod. 11.01 truss with side 25 cod. 11.01/A truss with side 25
cod. 15.01 truss with side 30 cod. 15.01/A truss with side 30
50
weights: 50 weights:
50 . 16.01: 2,1 kg 50 . 16.01/A: 2,2 kg
. 10.01: 2,4 kg . 10.01/A: 2,5 kg
. 11.01: 3,6 kg . 11.01/A: 3,4 kg
. 15.01: 7,0 kg . 15.01/A: 7,1 kg

90° CURVE EXTERNAL PITCH FLAT 90° CURVE WITH PILLAR

PLATE
cod. 16.01/B truss with side 12,5 cod. 16.01/C truss with side 12,5
cod. 10.01/B truss with side 20 cod. 10.01/C truss with side 20
cod. 11.01/B truss with side 25 cod. 11.01/C truss with side 25
cod. 15.01/B truss with side 30 cod. 15.01/C truss with side 30
50 50
weights: weights:
50 . 16.01/B: 2,1 kg 50 . 16.01/C: 2,2 kg
. 10.01/B: 2,3 kg . 10.01/C: 2,7 kg
. 11.01/B: 3,3 kg . 11.01/C: 3,9 kg
. 15.01/B: 7,0 kg . 15.01/C: 8,4 kg

TRUSS 50 cm FLAT 135° CURVE

WITH PILLAR PLATE
cod. 16.50/A truss with side 12,5 cod. 16.01/F truss with side 12,5
cod. 10.50/A truss with side 20 cod. 10.01/F truss with side 20
cod. 11.50/A truss with side 25 25 cod. 11.01/F truss with side 25
cod. 15.50/A truss with side 30
25 weights:
50 weights: . 16.01/F: 1,2 kg
. 16.50/A: 1,4 kg . 10.01/F: 1,6 kg
. 10.50/A: 2,1 kg . 11.01/F: 2,2 kg
. 11.50/A: 3,0 kg
. 15.50/A: 8,0 kg

135° CURVE EXTERNAL PITCH 135° CURVE INTERNAL PITCH

cod. 16.01/G truss with side 12,5 cod. 16.01/H truss with side 12,5
cod. 10.01/G truss with side 20 cod. 10.01/H truss with side 20
25 cod. 11.01/G truss with side 25 25 cod. 11.01/H truss with side 25
25 25
weights: weights:
. 16.01/G: 1,2 kg . 16.01/H: 1,2 kg
. 10.01/G: 1,6 kg . 10.01/H: 1,6 kg
. 11.01/G: 2,2 kg . 11.01/H: 2,2 kg

9 T 13 - 2005
 CURVES FOR TRIANGULAR TRUSSES
standard production - quick delivery
built in steel - complete with galvanised 8.8 steel nuts and bolts

"T" FLAT "T" FLAT WITH PILLAR PLATE

cod. 16.02 truss with side 12,5 cod. 16.02/A truss with side 12,5
cod. 10.02 truss with side 20 cod. 10.02/A truss with side 20
cod. 11.02 truss with side 25 cod. 11.02/A truss with side 25
cod. 15.02 truss with side 30 cod. 15.02/A truss with side 30
50 50
weights: weights:
50 . 16.02: 2,4 kg 50 . 16.02/A: 2,5 kg
. 10.02: 2,8 kg . 10.02/A: 3,2 kg
. 11.02: 3,9 kg . 11.02/A: 4,5 kg
. 15.02: 8,3 kg . 15.02/A: 9,7 kg

"T" WITH SIDE JUNCTION "T" WITH TOP JUNCTION

cod. 16.02/B truss with side 12,5 cod. 16.02/C truss with side 12,5
cod. 10.02/B truss with side 20 cod. 10.02/C truss with side 20
cod. 11.02/B truss with side 25 cod. 11.02/C truss with side 25
cod. 15.02/B truss with side 30 cod. 15.02/C truss with side 30
50 50
weights: weights:
50 . 16.02/B: 2,5 kg 50 . 16.02/C: 2,6 kg
. 10.02/B: 2,9 kg . 10.02/C: 3,0 kg
. 11.02/B: 4,0 kg . 11.02/C: 4,1 kg
. 15.02/B: 8,5 kg . 15.02/C: 8,7 kg

CROSS

cod. 16.03 truss with side 12,5

cod. 10.03 truss with side 20
cod. 11.03 truss with side 25
cod. 15.03 truss with side 30
50 weights:
50 . 16.03: 2,6 kg
. 10.03: 3,2 kg
. 11.03: 4,4 kg
. 15.03: 10,1 kg

10 T 13 - 2005
 SQUARE TRUSSES
standard production - quick delivery
built in steel - complete with galvanised 8.8 steel nuts and bolts

cod. 20 cod. 21 cod. 22

- side: 20 cm - side: 25 cm - side: 25 cm

- pylon's parallel pipe: ø 14 mm - pylon's parallel pipe: ø 18 mm - pylon's parallel pipe: ø 18 mm
- available length: - available length: - available length:
. 50 cm - 2,5 kg . 50 cm - 3,6 kg . 50 cm - 5,5 kg
. 100 cm - 3,7 kg . 100 cm - 5,4 kg . 100 cm - 8,1 kg
. 150 cm - 4,9 kg . 150 cm - 7,2 kg . 150 cm - 10,7 kg
. 160 cm - 5,1 kg . 200 cm - 9,0 kg . 200 cm - 13,3 kg
. 200 cm - 6,1 kg . 225 cm - 9,9 kg . 225 cm - 14,6 kg
. 225 cm - 6,7 kg . 250 cm - 10,8 kg . 250 cm - 15,9 kg
. 250 cm - 7,3 kg - operable handlings: . 275 cm - 17,2 kg
- operable handlings: . electrolytic galvanisation; - operable handlings:
. electrolytic galvanisation; . heat galvanisation; . electrolytic galvanisation;
. heat galvanisation; . cataphoresis; . heat galvanisation;
. cataphoresis; . coating. . cataphoresis;
. coating. - max insertable pipe: . coating.
- max insertable pipe: ø 185 mm, 155x155 mm - max insertable pipe:
ø 160 mm, 120x120 mm ø 185 mm, 155x155 mm

16,4 20 19 25 19 25

20 25 25
maximum loads at page 12
cod. 23 cod. 28 cod. 29

- side: 30 cm - side: 40 cm - sides: 30 x 50 cm

- pylon's parallel pipe: - pylon's parallel pipe: - pylon's parallel pipe:
ø 25 mm ø 40 mm ø 40 mm
- available length: - available length: - available length:
. 100 cm - 11,9 kg . 100 cm - 19,5 kg . 100 cm - 21,8 kg
. 140 cm - 14,8 kg . 120 cm - 22,4 kg . 150 cm - 27,4 kg
. 150 cm - 15,5 kg . 150 cm - 26,8 kg . 200 cm - 33,0 kg
. 200 cm - 19,1 kg . 200 cm - 34,1 kg . 250 cm - 38,6 kg
. 250 cm - 22,7 kg . 250 cm - 41,5 kg - operable handlings:
- operable handlings: - operable handlings: . electrolytic galvanisation;
. electrolytic galvanisation; . electrolytic galvanisation; . heat galvanisation;
. heat galvanisation; . heat galvanisation; . cataphoresis;
. cataphoresis; . cataphoresis; . coating.
. coating. . coating. - max insertable pipe:
- max insertable pipe: - max insertable pipe: ø 215 mm, 215x215 mm
ø 235 mm, 190x190 mm ø 315 mm, 255x255 mm

31,9 40 21,9
24 30 41,8 30

30 40 50

11 T 13 - 2005
 MAXIMUM LOADS
SQUARE TRUSSES

Equally distributed load applied on the knots of both

lower pylon's parallel pipes.

Trusses have been assembled like showed at page 26.

The following data has been obtained from tests done

by Selvolina. It is, therefore, to be taken as
approximate.

Square Truss side 20 cm - cod. 20 Square Truss side 25 cm - cod. 22

maximum equally maximum equally
with reinforcing with reinforcing
Spanning - meters distributed load per Spanning - meters distributed load per
plates plates
meter meter
4 (2+2) no 120 kg 4 (2+2) no 190 kg
5 (2,5+2,5) no 75 kg 4 (2+2) yes 250 kg
6 (2+2+2) no 40 kg 5 (2,5+2,5) no 110 kg
6 (2+2+2) yes 45 kg 5 (2,5+2,5) yes 120 kg
7,5 (2,5+ 2,5+2,5) yes 20 kg 6 (2+2+2) no 75 kg
8 (2+2+2+2) yes 20 kg 6 (2+2+2) yes 85 kg
10 (2,5+2,5+2,5+2,5) yes 10 kg 7,5 (2,5+ 2,5+2,5) yes 30 kg
10 (2+2+2+2+2) yes 7 kg 8 (2+2+2+2) yes 18 kg
10 (2,5+2,5+2,5+2,5) yes 18 kg

Square Truss side 25 cm - cod. 21

maximum equally Square Truss side 30 cm - cod. 23
with reinforcing
Spanning - meters distributed load per
plates with side maximum equally
meter with reinforcing
Spanning - meters reinforcements distributed load per
4 (2+2) no 210 kg plates
cod 23.09 meter
5 (2,5+2,5) no 144 kg 8 (2+2+2+2) yes yes 135 kg
5 (2,5+2,5) yes 172 kg 10 (2+2+2+2+2) yes yes 80 kg
6 (2+2+2) no 67 kg 12 (2+2+2+2+2+2) yes yes 40 kg
6 (2+2+2) yes 86 kg
7,5 (2,5+ 2,5+2,5) yes 57 kg Square Truss side 40 cm - cod. 28
8 (2+2+2+2) yes 33 kg
with side maximum equally
10 (2,5+2,5+2,5+2,5) yes 19 kg Spanning - meters
with reinforcing
reinforcements distributed load per
plates
10 (2+2+2+2+2) yes 21 kg cod 28.09 meter
10 (2+2+2+2+2) yes yes 200 kg
12 (2+2+2+2+2+2) yes yes 115 kg

12 T 13 - 2005
 CURVES FOR SQUARE TRUSSES
standard production - quick delivery
built in steel - complete with galvanised 8.8 steel nuts and bolts

90° CURVE 120° CURVE

FOR HEXAGONAL RING
cod. 20.01 truss with side 20 cod. 20.01/A truss with side 20
cod. 21.01 truss with side 25 A cod. 21.01/A truss with side 25
cod. 23.01 truss with side 30 A cod. 23.01/A truss with side 30
cod. 28.01 truss with side 40
weights: weights and lengths:
50 . 20.01: 3,3 kg . 20.01/A: 2,1 kg ; A = 25 cm
. 21.01: 4,4 kg . 21.01/A: 3,5 kg ; A = 25 cm
50
. 23.01: 9,7 kg 120° . 23.01/A: A = 50 cm
. 28.01: 16,2 kg

135° CURVE CUBE FOR TRUSS

FOR OCTAGONAL RING
cod. 20.01/B truss with side 20 cod. 20.02 truss with side 20
A cod. 21.01/B truss with side 25 cod. 21.02 truss with side 25
A cod. 23.01/B truss with side 30 cod. 23.02 truss with side 30
cod. 28.02 truss with side 40
weights and lengths: weights and lengths:
. 20.01/B: 2,1 kg ; A = 25 cm A . 20.02: 1,5 kg ; A = 20 cm
. 21.01/B: 3,5 kg ; A = 25 cm A . 21.02: 3,9 kg ; A = 25 cm
135° . 23.01/B: A = 50 cm . 23.02: 6,2 kg ; A = 30 cm
. 28.02: 19,9 kg ; A = 40 cm

60° TRAPEZIUM
FOR HEXAGONAL RING
cod. 20.06 truss with side 20
cod. 21.03 truss with side 25
cod. 23.05 truss with side 30

weights and lengths:

. 20.06: 1,3 kg ; A = 20 cm
A
60° . 21.03: 2,0 kg ; A = 25 cm
. 23.05: 3,9 kg ; A = 30 cm

13 T 13 - 2005
 TRUSS RINGS
standard production - quick delivery
built in steel - complete with galvanised 8.8 steel nuts and bolts

SQUARE TRUSS
operable handlings:
. electrolytic galvanisation;
. heat galvanisation;
. cataphoresis;
. coating.

cod. 92.06 cod. 92.12

- truss side: 30 cm - truss side: 30 cm
- pylon's parallel pipe: ø 25 mm - pylon's parallel pipe: ø 25 mm
- ø ext. ring: 6 m - ø ext. ring: 12 m
- n° of modules: 8 - n° of modules: 16
- module weight: 19,8 kg - module weight: 22,1 kg
- total weight: 158,4 kg - total weight: 353,6 kg

TRIANGULAR TRUSS
operable handlings:
. electrolytic galvanisation;
. heat galvanisation;
. cataphoresis;
. coating.

cod. 91.200 cod 91.300

- truss side: 20 cm - truss side: 20 cm
- pylon's parallel pipe: ø 14 mm - pylon's parallel pipe: ø 14 mm
- ø ext. ring: 2 m - ø ext. ring: 3 m
- n° of modules: 2 - n° of modules: 4
- module weight: 7,1 kg - module weight: 5,8 kg
- total weight: 14,2 kg - total weight: 23,2 kg
cod. 91.500 cod. 91.600
- truss side: 25 cm - truss side: 30 cm
- pylon's parallel pipe: ø 18 mm - pylon's parallel pipe: ø 30 mm
- ø ext. ring: 5 m - ø ext. ring: 6 m
- n° of modules: 8 - n° of modules: 8
- module weight: 7,2 kg - module weight: 15,2 kg
- total weight: 57,6 kg - total weight: 121,6 kg
14 T 13 - 2005
 QUICK CONNECTING TRUSSES
in high tensile steel
standard production - quick delivery

cod. 50AR cod. 51AR

- short side: 30 cm - short side: 30 cm

- higher pylon's parallel pipe: ø 40 mm - higher pylon's parallel pipe: ø 60 mm
- lower pylon's parallel pipes: ø 30 mm - lower pylon's parallel pipes: ø 40 mm
- available legths: - available lengths:
. 200 - 16,0 kg . 200 cm - 22,5 kg
. 250 - 19,8 kg . 250 cm - 27,5 kg
. 300 - 23,5 kg . 300 cm - 32,5 kg
- operable handlings: - operable handlings:
. polyester coating for external use . polyester coating for external use

40 40

30 30

maximum loads at page 16

cod. 42AR cod. 43AR

- short side: 35 cm - side: 64 cm

- long side: 58 cm - pylon's parallel pipes: ø 40 mm
- pylon's parallel pipes: ø 30 mm - available legths:
- available lengths: . 122 cm - 20,5 kg
. 122 cm - 15,5 kg . 248 cm - 37,0 kg
. 248 cm - 27,1 kg - operable handlings:
- operable handlings: . polyester coating for external use
. polyester coating for external use

58 64

35 64
15 T 13 - 2005
 MAXIMUM LOADS
QUICK CONNETTING TRUSSES

Equally distributed load applied on the knots of both

lower pylon's parallel pipes.

The following data has been obtained from tests done

by Selvolina. It is, therefore, to be taken as
approximate.

Quick Connecting Truss side 30 cm - cod. 50AR Quick Connecting Truss side 30 cm - cod. 51AR
maximum equally maximum equally
with reinforcing with reinforcing
Spanning - meters distributed load per Spanning - meters distributed load per
plates plates
meter meter
8 (2,5+3+2,5) n.a. 250 kg
10 (2,5+2,5+2,5+2,5) n.a. 150 kg
75 kg load tests are being
12 (2,5+2,5+2+2,5+2,5) n.a.
carried out

Quick Connecting Truss 58 x 35 cm - cod. 42AR Quick Connecting Truss side 64 cm - cod. 43AR
maximum equally maximum equally
with reinforcing with reinforcing
Spanning - meters distributed load per Spanning - meters distributed load per
plates plates
meter meter

load tests are being load tests are being

carried out carried out

16 T 13 - 2005
 DISMANTABLE TRUSS
for structures with vertical expansion
standard production - quick delivery
built in steel (stainless on demand) - complete with galvanised 8.8 steel nuts and bolts

cod. 60

- side: 50 cm
- pylon's parallel pipes: ø 60 mm
50 - available lengths:
. 300 cm
- weight for meter: 32 kg
- maximum height: 40 m
50 - operable handlings:
. electrolytic galvanisation;
. heat galvanisation;
. cataphoresis;
. coating.

Volume ratio: 1 / 6,2

Example:
- volume 102 m mounted: 31 m³
- volume 102 m dismounted: 4,85 m³

17 T 13 - 2005
 TRUSS ACCESSORIES
standard production - quick delivery
built in steel

REINFORCING PLATES FOR REINFORCING PLATES FOR

SQUARE SHAPED HEADINGS TRIANGULAR SHAPED HEADINGS

cod. GA20 truss with side 20 cod. GA25 truss with side 20 tr
cod. GA21 truss with side 25 cod. GA26 truss with side 25 tr
cod. GA23 truss with side 30 cod. GA24 truss with side 30 tr

A weights and lengths: A weights and lengths:

. GA20: 0,1 kg ; A = 80 mm . GA25: 0,1 kg ; A = 59 mm
. GA21: 0,1 kg ; A = 90 mm . GA26: 0,1 kg ; A = 70 mm
. GA23: 0,2 kg ; A = 120 mm . GA24: 0,1 kg ; A = 81 mm

PAIR OF PLATES FOR TRUSS LATERAL REINFORCINGS FOR

JUNCTION HEADINGS
cod. GA11 truss with side 20
cod. GA12 truss with side 25 cod. 23.09 truss with side 30
cod. GA13 truss with side 30 cod. 28.09 truss with side 40
cod. GA19 truss with side 40
weights and lengths:
weights: . 23.09: 0,4 kg ; A = 230 mm
A
. GA11: 0,9 kg . 28.09: 0,7 kg ; A = 280 mm
. GA12: 1,5 kg
. GA13: 1,7 kg
. GA19: 4,8 kg

WALL PLATE BASE SHEET

cod. piastra1 truss with side 12,5 cod. 20.03 base 31x31 cm; h 3,0 cm
cod. piastra2 truss with side 20 cod. 20.04 base 41x41 cm; h 3,0 cm
cod. piastra3 truss with side 25 cod. 20.07 base 51x51 cm; h 3,0 cm
cod. piastra4 truss with side 30 cod. 20.05 base 58x58 cm; h 3,5 cm
A
weights: weights:
. PIASTRA1: 1,0 kg A . 20.03: 3,1 kg
. PIASTRA2: 2,0 kg . 20.04: 11,1 kg
. PIASTRA3: 3,7 kg . 20.07: 16,3 kg
. PIASTRA4: 6,8 kg . 20.05: 19,0 kg

TRIANGULAR SHAPED HEADINGS SQUARE SHAPED HEADINGS FOR

FOR LIGHTING STAND TYPE "C" LIGHTING STAND TYPE "C"

cod. 10.06 truss with side 20 cod. 20.08 truss with side 20
cod. 11.06 truss with side 25 cod. 21.08 truss with side 25

weights: weights:
. 10.06: 1,1 kg . 20.08: 1,4 kg
. 11.06: 1,3 kg . 21.08: 1,7 kg

18 T 13 - 2005
 TRUSS ACCESSORIES
standard production - quick delivery
built in steel

HEADINGS FOR ROOF HANGING HEADINGS FOR ROOF HANGING

3 POINTS FOR TRIANGULAR TRUSS 1 POINT FOR TRIANGULAR TRUSS
cod. 16.02 truss with side 12,5 cod. 16.03 truss with side 12,5
cod. 10.07 truss with side 20 cod. 10.08 truss with side 20
cod. 11.07 truss with side 25 cod. 11.08 truss with side 25
cod. 15.03 truss with side 30 cod. 15.04 truss with side 30
cod. 52.03 truss with side 40 cod. 52.04 truss with side 40
weights: weights:
. 16.02: 0,2 kg . 16.03: 0,1 kg
. 10.07: 0,4 kg . 10.08: 0,3 kg
. 11.07: 0,6 kg . 11.08: 0,5 kg
. 15.03: 1,3 kg . 15.04: 1,0 kg
. 52.03: 3,2 kg . 52.04: 2,4 kg
HEADINGS FOR ROOF HANGING HEADINGS FOR ROOF HANGING
3 POINTS FOR SQUARE TRUSS 1 POINT FOR SQUARE TRUSS
cod. 20.09 truss with side 20 cod. 20.10 truss with side 20
cod. 21.09 truss with side 25 cod. 21.10 truss with side 25
cod. 23.03 truss with side 30 cod. 23.04 truss with side 30
cod. 28.03 truss with side 40 cod. 28.04 truss with side 40

weights: weights:
. 20.09: 0,5 kg . 20.10: 0,4 kg
. 21.09: 0,8 kg . 21.10: 0,7 kg
. 23.03: 1,6 kg . 23.04: 1,3 kg
. 28.03: 3,0 kg . 28.04: 2,3 kg

PLATES FOR ROOF HANGING TENSION ARMS'S PLATE FOR

cod. piatto1 truss with side 12,5 DISMOUNTABLE TRUSSES
cod. piatto2 truss with side 20
cod. piatto3 truss with side 25 cod. GA27
cod. piatto4 truss with side 30
cod. piatto5 truss with side 40 weights:
weights: . GA27: 0,9 kg
. piatto1: 0,2 kg
. piatto2: 0,5 kg
. piatto3: 0,9 kg
. piatto4: 1,3 kg
. piatto5: 2,5 kg

SUPPORTING TREAD-IN ANTISCRATCH TIE ELASTIC COTTER PIN

STAND STRIP
cod. GA40 wire ø2,5 mm
cod. GA07 cod. GA10 cod. GA41 wire ø6,0 mm
for pipe ø14 mm
weights:
. GA07: 0,1 kg cod. GA09
for pipe ø18 mm

19 T 13 - 2005
 TRUSS ACCESSORIES
standard production - quick delivery
built in steel

HOOKS
cod. GA01 for pipe ø25 mm
cod. GA02 for pipe ø30 mm
cod. GA03 for pipe ø40 mm
90 95 135 135 cod. GA04 for pipe ø50 mm
69
cod. GA05 for pipe ø50 mm
weights:
. GA01: 0,1 kg
. GA02: 0,3 kg
cod. GA01
cod. GA02 . GA03: 0,3 kg
cod. GA03 cod. GA04 cod. GA05 . GA04: 0,4 kg
max. load capacity 85 kg max. load capacity145 kg . GA05: 0,7 kg

PROFESSIONAL HOOKS

cod. GA30 for pipe ø25 mm

cod. GA31 for pipe ø30 mm
cod. GA32 for pipe ø40 mm
64 94 cod. GA33 for pipe ø50 mm
77 106
weights:
. GA30: 0,2 kg
cod. GA30 . GA31: 0,4 kg
cod. GA31 cod. GA32 . GA32: 0,4 kg
cod. GA33
. GA33: 0,6 kg

ANTISCRATCH PROFESSIONAL
HOOKS
cod. GA50 for pipe ø25 mm
cod. GA51 for pipe ø30 mm
cod. GA52 for pipe ø40 mm
64 77 94 cod. GA53 for pipe ø50 mm
cod. GA54 for pipe ø80 mm
weights:
. GA50: 0,2 kg
cod. GA50 . GA51: 0,4 kg
cod. GA51 cod. GA52 . GA52: 0,4 kg
. GA53: 0,6 kg
NEW 0 mm antiscratch . GA54: 0,7 kg
ø8
r pipes steel
fo tongue

106 135

cod. GA53
cod. GA54

20 T 13 - 2005
 ALUMINUM PILLAR SIDE 12 cm
standard production - quick delivery

SLIDING UNDER
COMPLETE PULLEYHOLDER CARRIAGE
PILLAR

supplied with a 900 kg

hoist

- cod. COL-35
cod. 35.01 weight: 5,8 kg cod. 35.04 weight: 22,0 kg

pulleyholder
PILLAR 6 m 4 STABILIZERS

maximum
sliding level pin
under carriage
stopping pin
sliding under
carriage
pillar 6 m cod. 35.02 weight: 18,8 kg n.4 stabilizers cod. 35.05 weight: 27,5 kg
12 x 12 cm
certified
aluminum
antispinning
pillar BASE
steel rope

manual hoist lodged

on the base through
extracting pins
cod. 35.03 weight: 66,5 kg
minimum
level pin
height
adjustable
tread-in base
stands framework
removable
stabilizing
tread-in stands

line of vertical holes for the pillar adjustment

to compensate uneven grounds

21 T 13 - 2005
 ALUMINUM PILLAR SIDE 20 cm
standard production - quick delivery

SLIDING UNDER
COMPLETE PULLEYHOLDER
CARRIAGE
PILLAR
pulleyholder
supplied with
a 1500 kg hoist
maximum
level pin
- cod. COL-36
sliding under carriage 20x20 cod. 36.04
cod. 36.01 weight: 7,5 kg weight: 48,0 kg
sliding under
carriage
35x58 TRUSS ADAPTER 64x64 TRUSS ADAPTER
sliding (cod. 42AR) (cod. 43AR)
under carriage
certified stopping pins
antispinning
steel rope
20 x 20 cm
aluminum
pillar
cod. 36.07 weight: 10,4 kg cod. 36.06 weight: 23,2 kg

PILLAR 4 STABILIZERS

manual hoist lodged

on the base through
extracting pins

pillar 6 m cod. 36.02 weight: 18,8 kg n.4 stabilizers cod. 36.05 weight: 67,9 kg
height minimum
adjustable level pin
tread-in BASE
stands base
framework
removable
stabilizing
tread-in stands
line of vertical holes
for the pillar adjustment
to compensate cod. 36.03 weight: 142,0 kg
uneven grounds

22 T 13 - 2005
 SELF RISING PILLAR WITH SIDE 30 cm
standard production - quick delivery

SLIDING UNDER
COMPLETE PULLEYHOLDER
CARRIAGE
PILLAR

supplied with a 900 kg

hoist

- height: 6,90 m pulleyholder

sliding under carriage 30x30 cod. 26.03
cod. COL26-6
cod. 26.04 peso: 6,5 kg weight: 26,0 kg
maximum
- height: 7,45 m level locks 64x64 TRUSS ADAPTER
cod. COL26-7 TERMINAL
(cod. 43AR)

sliding under
- height: 8,40 m carriage
cod. COL26-8
sliding under
carriage safety
locking hole
cod. 26.06 peso: 7,1 kg terminal 85cm cod. 26.05 weight: 21,5 kg

certified
antispinning pillar in 30 x 30 cm EXTENSION 4 STABILIZERS
steel rope steel truss

manual hoist lodged

on the base through
extracting pins minimum extension 100cm cod. 26.100 weight: 19,0 kg
level locks extension 150cm cod. 26.150 weight: 25,6 kg n.4 stabilizers cod. 26.01 weight: 30 kg
extension 200cm cod. 26.200 weight: 33,4 kg

height
adjustable pillar BASE
tread-in raising
stands joint

removable
stabilizing
tread-in stands
with articulated joint cod. 26.208 weight: 96,8 kg
without articulated joint cod. 26.208/A weight: 86,8 kg

23 T 13 - 2005
 SELF RISING PILLAR WITH 40 cm
standard production - quick delivery

pulleyholder

SLIDING UNDER
COMPLETE sliding under PULLEYHOLDER
CARRIAGE
PILLAR carriage
safety lock
supplied with a 1500 kg
hoist

sliding under
- height: 8,08 m carriage
sliding under carriage 40x40 cod. 31.03
cod. COL31-6
cod. 31.04 weight: 39,0 kg weight: 67,0 kg
sliding under
carriage
- height: 9,08 m 64x64 TRUSS ADAPTER CUBE HOLDER SIDE 40
safety lock
cod. COL31-7 (cod. 43AR) (cod. 28.02)

- height: 9,58 m
cod. COL31-8
pillar in 40 x 40 cm
certified steel truss
antispinning
cod. 31.06 weight: 21,6 kg cod. 31.07 weight: 17,8 kg
steel rope

EXTENSION 4 STABILIZERS
manual hoist lodged
on the base through
extracting pins

minimum
level locks
extension 100cm cod. 31.100 peso: 19,8 kg
12 height extension 150cm cod. 31.150 peso: 29,5 kg n.4 stabilizers cod. 31.01 weight: 92,0 kg
adjustable extension 200cm cod. 31.200 peso: 39,4 kg
tread-in
stands 4 removable
stabilizing BASE
tread-in stands

without articulated joint cod. 31.208/A

weight: 183,0 kg

24 T 13 - 2005
 LIGHTING STAND
standard production - quick delivery

LIGHTIING STAND LIGHTIING STAND

TYPE "C" TYPE "B"
cod. ST03 cod. ST02
weight 38,0 kg weight 7,9 kg

2,05 m

2,00 m

1,20 m

4,20 m max

GALVANIZED LIGHT PROJECTOR HOLDER

EXTENSION ø2,8cm FOR PIPES ø2,8cm

2m 1,1 m

cod. ST10 weight: 2,0 kg cod. ST14 weight: 2,3 kg

GALVANIZED LIGHT PROJECTOR HOLDER

EXTENSION ø2,8cm FOR PIPES ø2,8cm

3m 1,5 m

cod. ST11 weight: 3,0 kg cod. ST15 weight: 2,8 kg

3 CIRCULAR BASES FOR LIGHT PROJECTOR HOLDER

LIGHTING STAND TYPE "C" WITH INSERTION ø2,8cm
1,5 m

cod. ST03/1 weight: 3 x 1,3 kg cod. ST18 weight: 3,4 kg

25 T 13 - 2005
 ASSEMBLING OF THE TRUSSES
with or without reinforcing plates
(all kind of trusses)

WITHOUT REINFORCING
PLATES

WITH REINFORCING PLATES

It is not necessary to use the

Utillize the reinforcing plates reinforcing plates when the
everytime the lateral load on lateral load on the trusses is of
the trusses makes it low intensity. Use only 8.8 steel
necessary for the headings screws.
to be reinforced. It is
necessary to assemble 8
reinforcing plates for every
couple of trusses. Use only
8.8 steel screws.
1 2

26 T 13 - 2005
 ASSEMBLING OF THE TRUSSES
lateral reinforcings for headings
(all kind of trusses)

HORIZONTAL
ASSEMBLING
load

VERTICAL
ASSEMBLING

Utilize the plates

everytime the lateral load
is high; for instance with
heavy wind. For
horizontal structures it
can be, sometimes,
sufficient to install only
one plate on the bottom
1 part of the trusses
headings. For vertical
structures it is important
to install all four plates
obtaining an
homogenous reinforcing.
It is advised to use
together the reinforcing
heading plates cod.
GA20, GA21, GA23,
GA24.
Use only 8.8 steel
screws.

27 T 13 - 2005
 ASSEMBLING
GA plates
(valid for all kind of square truss)

With the plates GA cod GA11,

GA12, GA13, GA19 it is possible
to assemble two trusses like
showed in the drawing. With this
system it is possible to realize
1 structures much more hinged
where each module is placeable
with greater freedom. From time
to time, on the base of the
customer's request, the technical
dept. in Selvolina will show the
best assembling procedure.
Use only 8.8 steel screws.

28 T 13 - 2005
 ASSEMBLING
plates for roof hanging
(valid for all kind of trusses)

This solution is perfect for loads which are not too heavy.
Please keep in mind that the load capacity is halved. For big
loads is advisable the use of the roof suspension heading.

FIXING EXAMPLES
(material available on demand)

29 T 13 - 2005
 ASSEMBLING
headings for roof hanging
(valid for all kind of trusses)

Perfect for heavy loads. With the

utilization of these headings all the truss
structure is used maximising the load
capacity.
In fact these headings offload the weight
on the whole of the truss heading and
therefore on all four pylon's parallel pipes.
Use only 8.8 steel screws.

30 T 13 - 2005
 ASSEMBLING
headings for roof hanging
with reinforcing plates
(valid for all kind of trusses)

Perfect for heavy loads, with the utilization of these headings all the truss structure is
used maximising the load capacity (1).
Where the headings are not used it is necessary to apply the reinforcing plates (2).
Use only 8.8 steel screws.

1 2

31 T 13 - 2005
 ASSEMBLING
roof hanging through fixing to the upper pylon's parallel pipe
(valid for all kind of triangular trusses)

PLEASE NOTE CAREFULLY : this fixing system it is to be used only in extreme cases, where it is not
possible to use one of the previous systems (as described in other pages).
Please keep in mind that load capacities are halved.

RIGHT YES
ASSEMBLING

NO

WRONG
ASSEMBLING

32 T 13 - 2005
 ASSEMBLING
roof hanging through fixing to the upper pylon's parallel pipe
(valid for all kind of square trusses)

PLEASE NOTE CAREFULLY : this fixing system it is to be used only in extreme cases, where it is not
possible to use one of the previous systems (as described in other pages).
Please keep in mind that load capacities are halved.
YES
RIGHT
ASSEMBLING

NO

WRONG
ASSEMBLING

33 T 13 - 2005
 EXAMPLE
Stand made with triangular trusses
realized with standard modules

cod. 11.150 cod. 11.01/F

cod. 11.01/C page 7 page 9
cod. 11.100
page 9
page 7

cod. 11.250 cod. 11.50

page 7 page 9

cod. 11.250
page 7

cod. GA07
page 19

code description qt.

11.50 triangular truss with side 25cm, length 50cm 2

11.100 triangular truss with side 25cm, length 100cm 2
11.150 triangular truss with side 25cm, length 150cm 2
11.250 triangular truss with side 25cm, length 250cm 6
11.01/C flat 90° curve with pillar plate for tr. truss side 25cm 4
11.01/F flat 135° curve for triangular truss side 25cm 4
GA07 supporting tread-in stand 12

34 T 13 - 2005
 EXAMPLE
Stand made with square trusses
realized with standard modules

cod. 22.200 cod. 22.150

page 11 page 11
cod. 21.02
page 13

1
cod. 22.250
page 11

cod. GA12
page 18

code description qt.

22.150 square truss with side 25cm, length 150cm 3

22.200 square truss with side 25cm, length 200cm 12
22.250 square truss with side 25cm, length 250cm 5
21.02 cube with side 25cm 5
GA12 pair of plates for truss junction with side 25cm 4

35 T 13 - 2005
 EXAMPLE
Stand made with square trusses
realized with standard modules
(cloths supplied on demand)

cod. 21.02
page 13 cod. 21.250
cod. GA12 page 11
page 18

cod. 21.200
page 11

cod. 21.100 cod. 21.150

page 11 page 11

code description qt.

21.100 square truss with side 25cm, length 100cm 3

square truss with side 25cm, length 150cm
cod. 21.200
21.150 5 cod. 21.150
21.200 square truss with side 25cm, length 200cm 12
page 11
page 11
21.250 square truss with side 25cm, length 250cm 8
21.02 cube with side 25cm 6
GA12 pair of plates for truss junction with side 25cm 9

36 T 13 - 2005
 EXAMPLE
Structure made with square trusses with wall bearing
realized with standard modules

cod. piastra4
page 18 1

cod. 23.02
page 13

cod. 23.200
page 11

code description qt.

23.200 square truss with side 30cm, length 200cm 14

23.02 cube with side 30cm 4
piastra4 wall plate for truss with side 30cm 2

37 T 13 - 2005
 EXAMPLE
portal made with triangular trusses
realized with standard modules

cod. 11.01
page 9 cod. 11.50
page 7

cod. 11.225
page 7
cod. 11.02
page 10

cod. 11.100
page 7

cod. 11.200
page 7 cod. 11.150
page 7

cod. 20.03
page 18

code description qt.

11.50 triangular truss with side 25cm, length 50cm 2

11.100 triangular truss with side 25cm, length 100cm 2
11.150 triangular truss with side 25cm, length 150cm 6
11.200 triangular truss with side 25cm, length 225cm 1
11.225 triangular truss with side 25cm, length 250cm 1
11.01 flat 90° curve for tr. truss side 25cm 2
11.02 "T" flat for triangular truss with side 25cm 4
20.03 base sheet with side 31cm 4

38 T 13 - 2005
 EXAMPLE
portal made with triangular trusses
realized with standard modules

cod. 15.250
page 7

cod. 15.01/A
page 9

cod. 15.150
page 7

cod. 15.100
page 7

cod. 15.02/C
page 15
cod. 15.200
page 7

cod. 20.07
page 18
code description qt.

15.100 triangular truss with side 30cm, length 100cm 2

15.150 triangular truss with side 30cm, length 150cm 4
15.200 triangular truss with side 30cm, length 200cm 2
15.250 triangular truss with side 30cm, length 250cm 2
15.01/A 90° curve internal pitch for tr. truss with side 30cm 2
15.02/C "T" with top junction for tr. truss with side 30cm 2
20.07 base sheet with side 51cm 2

39 T 13 - 2005
 EXAMPLE
hanging light projector made with triangular trusses
realized with standard modules
(hoops, dowels and wires on demand)

1
cod. 10.200
page 7

cod. 10.01
page 9

cod. piatto2
page 19

code description qt.

10.200 triangular truss with side 20cm, length 200cm 3

10.01 flat 90° curve for triangular truss with side 20cm 2
piatto2 plates for roof hanging for truss with side 20cm 6

40 T 13 - 2005
 EXAMPLE
hanging light projector made with square trusses
realized with standard modules
(light projectors not supplied.
hoops, dowels and wires on demand)

1
cod. 20.200
page 11

cod. piatto2
page 19

cod. 20.01/A
page 13

code description qt.

20.200 square truss with side 20cm, length 200cm 3

20.01/A 120° curve for square truss with side 20cm 2
piatto2 plates for roof hanging for truss with side 20cm 6

41 T 13 - 2005
 EXAMPLE
pillar in dismantable truss
realized with standard modules

cod. 60.300
page 19

cod. 60.300
page 17

code description qt.

60.300 dismantable truss lenght 300cm 10

GA27 tension arms's plate for dismountable trusses 8

42 T 13 - 2005
 EXAMPLE
lighting stand with light projector holder
(light projectors not supplied)

cod. ST18
page 25

cod. ST03
page 25

code description qt.

ST03 lighting stand type "C" 1

ST18 light projector holder with insertion ø2,8 cm 1

43 T 13 - 2005
 EXAMPLE
Hot dip galvanised structure for external environments.
Structure ballasted from its internal part.
1000
Coupling system
"Track Selvoline"

Wooden panels
thickness 27 mm
3500

Panel

Ballasting
3439
medium axis
track

6000
Supoprting tread-in stands
to compensate height
differences

Panels of any thickness.

Sliding with nylon hooks "Selvoline"
to be applied on the panels

Nylon hook
"Selvoline" Track

Panel

Aluminum track "Selvoline"

with hole for spreader 1.8 cm
fixed on the truss structure
with rivets or self piercing screws (every 25cm).

44 T 13 - 2005
 STRUCTURE FOR FAIRS
with mezzanine
fully realized in aluminum

Selvolina has studied this structure to satisfy the needs of the companies and the renters who often participate
in fairs or similar events. Aluminum, in which the structure is made, guarantees easy transportation and quick
assembling making it fireproof.
As it is done on the ground the assembling is extremely easy: 3 persons will take a day's work

Find attached the following documentation which might be presented to the competent authority:
- assembling instructions;
- technical drawings;
- calculation report signed by a qualified engineer
- safety plan.

Structure weight 25 q
aluminum walking surface included

220

510

270 290

400

400

400
400
This dimension can be
changed depending on
the customer's needs.
dimensions in cm

45 T 13 - 2005
 Our Staff
invites you to visit our new website

www.selvoline.com
where you can easily consult our latest news and
download all the updated infos you might need:

www.selvoline.com
[email protected]

CATALOGUE
�������
���������
T 13 - 2005
WITH LOAD CAPACITY PARAMETERS

D - Otto
SELVOLINA PRODUCES:
STAGES, DANCE FLOORS,
MULTIPURPOSE FOOT
DESCRIPTIONS & SPECIFICATIONS
BOARDS, ROOF COVERS,
TRUSSES FOR FURNISHING,
EVENTS AND SHOWS, BIG
SCREENS, TRIBUNES,
GAZEBOS, TUNNELS,
BENCHES, LAP-DANCE
CUBES AND CAGES, SELVOLINA PRODUCES:
SPECIAL STRUCTURES, STAGES, DANCE FLOORS, MULTIPURPOSE FOOT BOARDS, ROOF COVERS, TRUSSES SELVOLINA PRODUCES:
POLITICAL ADVERTISING FOR FURNISHING, EVENTS AND SHOWS, BIG SCREENS, STAGES, DANCE FLOORS, MULTIPURPOSE FOOT BOARDS, ROOF COVERS, TRUSSES
PANELS. www.selvoline.com TRIBUNES, GAZEBOS, TUNNELS, BENCHES, LAP-DANCE CUBES AND CAGES, FOR FURNISHING, EVENTS AND SHOWS, BIG SCREENS, TRIBUNES, GAZEBOS, TUNNELS, BENCHES,
LAP-DANCE CUBES AND CAGES, SPECIAL STRUCTURES, POLITICAL ADVERTISING PANELS.
SPECIAL STRUCTURES, POLITICAL ADVERTISING PANELS.

General Catalogue Expolux Catalogue Trusses Catalogue

LINEA DI GAZEBI ED ALLESTIMENTI PER CAMPING

COMUNITA’ – BAR – RISTORANTI
Contrada Selvole, 29 AMBIENTI SPORTIVI – GIARDINI E TERRAZZI
46042 Castel Goffredo (MN) Italy
STRUTTURE RETICOLARI METALLICHE TRIANGOLARI E
Tel. +39 – 0376 779307 Fax +39 – 0376 779299 QUADRATE PER SPETTACOLI ED ALLESTIMENTI
PALCHI – PISTE DA BALLO – TRIBUNE MODULARI
http://www.selvoline.com GABBIE E CUBI PER BALLERINI E BALLERINE
E-mail : [email protected] TUNNEL MODULARI PER INGRESSO COLLEGAMENTO

FOOTBOARDS
PADIGLIONI FIERISTICI

PRICE LIST
New conception, patented, realized to satisfy the ever increasing demand for modular and
multi use footboards, reduced height, adaptable to any surface, practical, low cost, when
needed they can be transformed into stages. All the footboards are usable for internal or
external use.
Inside the catalogue: descriptions, technical data sheet, specifications and suggestion for
the utilization.

ECO SLIM
• REDUCED HEIGHT FRAME • STANDARD MEASUREMENTS:
• MATERIAL – STEEL 50 X 50 CM – 50 X 100 CM
Economico
• MINIMUM HEIGHT – CM 7 100 X 100 CM
• MAXIMUM HEIGHT – CM 20 • LOW COST

TECNO SLIM
• REDUCED HEIGHT FRAME • MAXIMUM HEIGHT – CM 20
• MATERIAL – STEEL • STANDARD MEASUREMENTS:
• MINIMUM HEIGHT – CM 7 50 X 50 CM – 50 X 100 CM
100 X 100 CM

TECNO ENERGY
• REDUCED HEIGHT FRAME • STANDARD MEASUREMENTS:
• MATERIAL – STEEL 50 X 50 CM – 50 X 100 CM
• MINIMUM HEIGHT – CM 7 100 X 100 CM
• MAXIMUM HEIGHT – CM 20 • LOW COST

TECNO LIGHT
• REDUCED HEIGHT FRAME • STANDARD MEASUREMENTS:
• MATERIAL – STEEL 50 X 50 CM – 50 X 100 CM
• MINIMUM HEIGHT – CM 7 100 X 100 CM

Cd-rom Selvoline
• MAXIMUM HEIGHT – CM 20 • LOW COST

ECO LIGHT
• REDUCED HEIGHT FRAME • STANDARD MEASUREMENTS:
• MATERIAL – STEEL 50 X 50 CM – 50 X 100 CM 50 45

• MINIMUM HEIGHT – CM 7 100 X 100 CM 50 40

• MAXIMUM HEIGHT – CM 20 • LOW COST

Pedana System Catalogue Price List

How to reach us:

FROM BOLOGNA:
- Motorway A1 towards Modena;
- In Modena take the exit to A22 Brennero, exit again at Mantova Sud;
- At the toll booth turn left. Pass through the following villages: Cerese - Gli Angeli - Curtatone - Rivalta sul Mincio - Rodigo - Gazoldo
degli Ippoliti - Piubega - Casaloldo - Castel Goffredo;
- Once in Castel Goffredo at the traffic light follow for Brescia;
- After 2 km you will see the restaurant Selvole on the left. Our company is right behind it.

FROM BOLZANO:
- Motorway A22 Brennero towards Modena;
- Close to Verona take the exit to the motorway A4 Milano - Venezia towards Milano;
- Exit at Desenzano del Garda;
- At the toll booth turn right, take the ring road towards Mantova - Castel Goffredo;
- Attention: once you’re driving parallel to Castiglione delle Stiviere take the exit to Carpenedolo, follow then for Asola (MN). You’ll
pass two roundabouts, at the third follow for Castel Goffredo. From the motorway exit to our Company there are 18 km;
- After the Castel Goffredo road sign drive for 2 km until, on the right, you’ll see the restaurant Selvole. Our company is right behind it.

FROM CREMONA:
- Villages to pass: Cicognolo - Isola Dovarese - Casalromano - Asola - Casaloldo - Castel Goffredo;
- Once in Castel Goffredo at the traffic light follow for Brescia;
- After 2 km you will see the restaurant Selvole on the left. Our company is right behind it.

FROM MILAN OR VENICE:

- Motorway A4 Milano - Venezia, exit at Desenzano del Garda;
- At the toll booth turn right, take the ring road towards Mantova - Castel Goffredo;
- Attention: once you’re driving parallel to Castiglione delle Stiviere take the exit to Carpenedolo, follow then for Asola (MN). You’ll
pass two roundabouts, at the third follow for Castel Goffredo. From the motorway exit to our Company there are 18 km;
- After the Castel Goffredo road sign drive for 2 km until, on the right, you’ll see the restaurant Selvole. Our company is right behind it.

FROM PARMA:
- Villages to pass: Colorno - Casalmaggiore - San Giovanni in Croce - Piadena - Canneto sull’Oglio - Casalromano - Asola
Casaloldo - Castel Goffredo;
- Once in Castel Goffredo at the traffic light follow for Brescia;
- After 2 km you will see the restaurant Selvole on the left. Our company is right behind it.

SELVOLINA - Contrada Selvole, 29 - 46042 Castel Goffredo (MN) Italy

Tel. +39 0376 779307 - Fax +39 0376 779299 - [email protected] - www.selvoline.com