POINTS OF USE
PDG-B 50-10-4
• Compact wall point of use
• Flow stop and working pressure adjustment
• Suitable for pure gases
• Made of anodized aluminum
Laser, Laboratories and Analysis
Typical applications INFO +
Pressure gauge plastic cover in different colors for gas identifi-
The PDG-B Points of Use are designed to be mount at cation.
the end of a gas distribution network in the labs or in the
industry workshops.
Designed for implementation of:
Pure gases Safety Alert
Except: Caution! in case of use of oxygen and oxidising gases,
Hydrocarbons the working pressure may not exceed 25 bar.
Specifications
Wall mounting with side entry (up or down) or back
(hidden network). They can be mounted, aligned on wall
mounting plates.
Maximal inlet pressure at 15°C����������50 bar
Outlet Pressure������������������������������������0.5 to 10 bar
Nominal nitrogen flow������������������������4 Nm³/h**
Internal/External leak rate ≤ 3x10⁻⁷ mbar.l/s helium., Operating temperature: -30°C
to +50°C.
*Oxygen and oxidizing gases: maximum working pressure 25 bar.
**Nominal nitrogen flow rate at 15°C.
Highlights
Compact and sleek design Wall point of use, cast in one
piece: 1/4 turn shut-off valve, adjustable regulator type
BS, low pressure gauge. Limit the risk of leaks. Proven
technology The bellows technology ensures a high preci-
sion of outlet pressure
Dimensions
Length (L) : 45 mm
Height (H) : 145 mm
Depth (D) : 108 mm
Ø1 : 40 mm
Net weight : 0.85 kg
Operating instructions Flow curve
OP 450 - PDG
Connection
Inlet connection: G 3/8 BSPP female from the top or from be-
hind (crossed bulkhead)
Outlet connection: G 3/8 BSPP female from the bottom or from
the rear (crossed bulkhead)
Connection description:
Depending on the material and the diameter of the pipe.
Model configuration
The PDG are delivered without fittings
Products
BE-en_PDG-B 50-10-4 version 7 - 2023-06-07 16:38:23 - Photo Credit: - Page 2/3
Product Inlet Outlet
Short Designation Gas Flow Inlet Fitting Outlet Fitting Material
Number Pressure Pressure
Air, CO, CO2,
G 3/8 BSPP
168689 POU PDG-B 50-10-4 H2, He, N2, 50 bar 10 bar 4 Nm³/h G 3/8 BSPP F Light alloy
female
N2O, Ar, O2
Options
Product Product
Long designation Long designation
Number Number
Pressure Gauge -1+10+15 Bar Ø 40mm Back entry CONNECTION G 3/8" Male Compression Fitting 6 MM
15978 16522
Brass-Cr Brass Chrome GYROLOK
CONNECTION G3/8 BSPP Male with Barb Hose for flexible Connector Cr-Brass G3/8 BSPP Male *Compression fitting
16516 16523
pipe Ø Int. 4 to 6mm 1/4" OD Brass *Flat seal PTCFE
Connector Cr-Brass G3/8 BSPP Male *Compression fitting Connector Cr-Brass G3/8 BSPP Male *Compression fitting
16521 16524
1/8" OD Brass *Flat seal PTCFE 10mm OD Brass *Flat seal PTCFE
Product Product
Long designation Long designation
Number Number
Connector Cr-Brass G3/8 BSPP Male *Compression fitting
16526 172813 KIT cover for PDG dark green for Ar box of 3 pieces
8mm OD Brass *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting 6mm
16558 172814 KIT cover for PDG red for Fuel Gas box of 3 pieces
OD SS *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting 8mm
16562 172815 KIT cover for PDG white for O2 box of 3 pieces
OD SS *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting 3/8"
16564 172816 KIT cover for PDG grey for CO2 box of 3 pieces
OD SS *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting 1/4"
16565 172817 KIT cover for PDG brown for He box of 3 pieces
OD SS *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting 1/8"
16566 172818 KIT cover for PDG light green for Air box of 3 pieces
OD SS *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting
16567 173312 SUPPORT plate for 2 PDG stainless steel 304L
10mm OD SS *Flat seal PTCFE
Connector SS G3/8 BSPP Male *Compression fitting
16569 173313 SUPPORT plate for 3 PDG stainless steel 304L
12mm OD SS *Flat seal PTCFE
19286 Connection G3/8 BSPP M NIP. Ø 8-10MM BR 173314 SUPPORT plate for 1 PDG stainless steel 304L
172812 KIT cover for PDG blue for N2O box of 3 pieces
Spare parts
Product Number SP Number Long designation
Pressure Gauge -1+10+15 Bar Ø 40mm Back entry
15978
Brass-Cr
FLAT SEAL in PCTFE 14,5x10x2 for outlet port G3/8
168689 17141
BSPP
KIT of Seals flat PA 6.6 for manometer M10x1 (2 seals
167800
0,5 mm, 2 seals 1 mm, 2 seals 1,5 mm) 1 KIT = 6 seals
BE-en_PDG-B 50-10-4 version 7 - 2023-06-07 16:38:23 - Photo Credit: - Page 3/3
Belgium : tel +32 2793 3841 / e-mail [email protected] Luxembourg : tel +352 2088 1137 / e-mail [email protected]
Air Liquide reserves the right to make all necessary modifications to the above specifications without notice.
www.airliquide.com
