Scribd
Upload
7 views1 page

Proctor Sub Base

The testing report details the moisture content and dry density relationship for sub base course material at Bridge Be'e Mos, conducted by Carya Timor Leste. The tests were performed under rainy weather conditions, with results indicating an optimum moisture content of 9.02% and a maximum dry density of 2.25 g/cm³. The report includes various trial data and measurements, confirming the material's compliance with AASTHO and ASTM standards.

Uploaded by

James Dava Marques
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views1 page

Proctor Sub Base

The testing report details the moisture content and dry density relationship for sub base course material at Bridge Be'e Mos, conducted by Carya Timor Leste. The tests were performed under rainy weather conditions, with results indicating an optimum moisture content of 9.02% and a maximum dry density of 2.25 g/cm³. The report includes various trial data and measurements, confirming the material's compliance with AASTHO and ASTM standards.

Uploaded by

James Dava Marques
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TESTING REPORT

MOISTURE CONTENT AND DRY DENSITY RELATIONSHEIP (PROCTOR)


(AASTHO T-193-74 & ASTM D-1883-89)
Project : Bridge Be'e Mos Test Reference No.
Location : Casnaver Sample Certificate No.
Contractor : Carya Timor Leste (CTL) Sample By : Supriyanto & Budi
Material Type : Sub Base Course Date Test Commended : Supriyanto
Saurce : Be'e Mos Date Test Finished : 22-Feb-2024
Weather : Raining Date Report : 23-Feb-2024
Balance ID :

TEST DATA
Trial No. (%) 2 4 6 8 10
OMC/MDD PLOT
Diameter of Mold, cm 15.29 15.29 15.29 15.29 15.29 2.40
Weigh of Mold, g 6823 6823 6823 6823 6823
2.35
Height of Mold, cm 11.51 11.51 11.51 11.51 11.51
Vol. of Mold, cm³ 2112,3 2112,3 2112,3 2112,3 2112,3 2.30
No. of blows per layer
Dry Density, g/cm³
56 56 56 56 56 2.25
Weight of Mold + wet
11608 11888 12009 11898 11671 2.20
sample, g
Weight of wet sample, g 4785 5065 5186 5075 4848 2.15
Density(wet) of soil
2.265 2.398 2.455 2.403 2.295
sample, g/cm³ 2.10
Moisture can ID WS A A1 Q4 15
2.05
Weight of can, g 14.60 11.71 12.20 17.52 10.06
2.00
Can + soil (wet) sample, g 46.80 40.60 52.20 58.40 74.80
Can + soil (dry) sample, g 45.20 38.60 48.89 54.20 67.21 1.95
Weight of oven dried 3 4 5 6 7 8 9 10 11 12 13 14 15
30.60 26.89 36.69 36.68 57.15
sample, g Moisture Content, %
Weight loss, g 1.60 2.00 3.31 4.20 7.59 COMPACTION CURVE OMC/MDD

Moisture Content, % 5.23 7.44 9.02 11.45 13.28 Optimum Moisture Content, % 9.02

Density (dry) of soil Max, Dry Density, g/cm³ 2.25


2.15 2.23 2.25 2.16 2.03
sample, g/cm³

Remarks :

1. Material Passing Sieve #4 = 4.75 mm

Tested by Checked by Approved by

Budi Setiawan Supriyanto Bahtiar Teguh


Lab. Technician QC & Plant Supervisor QC & Plant Manager

You might also like