DJI Matrice 4 Series

插入产品图
DJI Matrice 4E/4T
The Age of Intelligent Flight
Flagship Intelligent Multi-Sensor Compact Drone

DJI Matrice 4T/4E

 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI Detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

 Intelligent Multi-Sensor Compact Drone with AI

Intelligent Operations With AI Crystal Clear Vision

Real-time AI detection of people, vehicles, and boats New 3x camera improves continuous zoom and image clarity
Intelligent features: FlyTo, POI, Smart Track and Cruise New 7x camera with 112x hybrid zoom captures license plates from 250m
Observed View, Line & Area Drawing with LRF Foreground stabilization, EIS, and electronic dehazing

Excel In Low-Light Precision Mapping

Factory-calibrated mapping camera for M4E
Improved obstacle avoidance in low-light environment
Distortion Correction 2.0 brings improved accuracy
Night scene mode supported
0.5s shooting interval
Equipped with NIR auxilliary light and spotlight payload
3-Directional Ortho Capture covers 2.8km² in a single flight
5-Directional Oblique Capture efficiency increased by 40%

Faster & Safer

Rapid takeoff within 15s
DJI Matrice 4E/4T Upgraded Accessories
25 km max. transmission range; 4G Enhanced Transmission; Gimbal-Following Spotlight illuminate objects 100m away
Supporting D-RTK 3 Relay staion Real-time Voice Speaker
Anti-GNSS-interference Speaker and Spotlight payloads work together
Improved GNSS & Vision Fusion Positioning D-RTK 3 Multifunctional Station supports relay, base station, and rover modes
 Matrice 4 Key Specs

15s 21m/s | 47mph

Home point updates through vision positioning Max Forward Flight Speed3
Fast Take Off VS M3E series 15m/s, increased by 40%

10m/s | ~22mph 25km(FCC) | 15mi

O4 Enterprise Transmission
Maximum Ascent Speed1
VS M3E series 15km, increased by 66%
VS M3E series 6m/s, increase by 33%

8m/s | ~18mph 49 min

Maximum Descent Speed2 Max Forward Flight Time

VS M3E series 6m/s, increase by 33% VS M3E+RTK, increases by 6 minutes4

Note:
1: N mode, obstacle avoidance is set as Brake
2: N mode, obstacle avoidance is set as Brake
3: 21m/s max. speed needs to be configured in Gain& Expo Tuning
4. 46 min max forward flight time with low-noise propellers
SDR 及 4G 混合图传方案

DJI RC Plus 2 Enterprise Version

O4 Enterprise Transmission 4G Enhanced Transmission

Live View Quality: 1080p/30fps 4G enhanced transmission
Max Download Speed: 20MB/s Aircraft 8 antenna system
Latency:130 ms

7 Hours Battery
High Gain Antenna Array
Built-in battery life：3.8 hours
FCC: 25km | 15mi
External battery life：3.2 hours
CE:12km
SRRC: 12km
Screen
Ingress Protection 7.02-inch LCD touchscreen
IP 54 Max brightness: 1400 nits

Operating Temperature Buttons

-20°C to 50°C | -4°F to 122°F Supports Button Backlight
(L1-L3 + R1-R3)

Note: RC Plus 2(Enterprise version) is not compatible with M30, M300, M350; Not interchangable with DJI Agriculture version RC Plus 2.
Enhanced Transmission Range and Quality

Built-in High Gain Antenna

25km Transmission Distance

New algorithm improves anti-interference ability
Aircraft 8 antennas system
RC high gain antenna
Transmission distance reaches 25km | ~15mi
49mins maximum flight time
DJI Cellular Dongle 2 Supported

4G Enhanced Transmission
Matrice 4 supports 4G enhanced transmission with
DJI Cellular Dongle 2

DJI Cellular Dongle 2 4G Dongle Compartment

Note: Cellular Dongle 2 may not be available in some countries and regions.
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Elevated Flight Safety

Built-in RTK Module Fusion Positioning

Supports the extended L5 frequency band Low-light fisheye vision sensors
Vision assisted positioning
Update home point via visual positioning

Preloading Obstacle Data Anti-Interference

Automatic preloading of elevation data* Capable of maintaining aircraft stability under

Preloading detailed map/model GNSS interference

Automatic RTH path planning

Note: Automatic loading of elevation data requires internet connection

Enhanced Vision Positioning and Obstacle Avoidance

Vision Positioning Enhanced Obstacle Avoidance

When GNSS is weak or lost, the vision system can improve aircraft Improved obstacle avoidance algorithms make it possible to avoid
stability, for scenarios like bridge inspection thin objects

Note: Obstacle avoidance performance depends on the object type, size, and environment.
Elevated Flight Safety at Night

Low-light Visual Sensors

6 vision sensors are capable of working when ambient light is at least 0.5 lux
Vision positioning can work within 30m from the ground, or 20m from objects to
its side, requiring surfaces of clear pattern and lighting.

Vision Assisted RTH

During the RTH process precise home point updates occur
through vision positioning
Fast take off within 15s in emergency situations
Anti-GNSS-Interference Capability
Able to detect and resist GNSS signal interference
When aircraft detects a GNSS interference, it will trigger RTH automatically
Preloading of Terrain Data

Automatically Load Terrain Data in Pilot 2 App

• When enabled, will automatically download global elevation map of 40 km × 40 km
(24.85 mi × 24.85 mi) around the home point
• Requires internet connection

Load Terrain Data in FH2

• Similar to Dock 2, you can enable obstacle data on FH2
• You can use the detailed 3D models that were constructed via FH2. Once loaded,
the model will be used for obstacle avoidance during flight.

Custom Flight Area

• You can use the custom flight area function on FH2 to restrict the aircraft to only
fly within the area you plan on the map (geocaging).
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Crystal Clear Vision with Multiple Sensors

Thermal Camera 3x Medium Tele Camera

640 × 512, f/1.0, 53 mm equivalent focal length 1/1.3 CMOS, 48 MP Effective Pixels
UHR Infrared Image, image resolutions up to f/2.8, Format Equivalent: 70 mm
1280 × 1024

7x Tele Camera Wide-Angle Camera

1/1.5 CMOS, 48 MP Effective Pixels 1/1.3 CMOS, 48 MP Effective Pixels
f/2.8, Format Equivalent: 168 mm f/1.7, Format Equivalent: 24 mm
VS M3T, pixels quantity increase by 4 times,
zoom capability increase by 2 times

Laser Range Finder NIR Auxiliary Lightt

Measurement Range: 1800 m | 5905 ft (1 Hz) FOV: 6°
Range Accuracy: 0.2 + 0.005 × D (m) Illumination Distance: 100 m | 328 ft

DJI Matrice 4T
Capture Every Detail at A Distance

Triple Camera System

• Enhanced continuous zoom experience
• 1x, 3x, and 7x cameras work together, offering
more clarity and safer inspections
• Auto exposure effectively brightens dark details
• All three lenses support AF
• 3x Medium Tele Camera delivers outstanding
image quality
• 7x Telephoto Camera provides clear visibility
Capture Every Detail at A Distance

112x Continuous Zoom

• Supports continuous zoom with RC dial
• Supports R1/R2 side buttons for quick zooming between
3x, 7x, 14x, 28x, 56x, and 112x
• Ability to see license plates from 250m | 820ft away, with
zoom capability doubled compared to the previous
generation
Capture Every Detail at A Distance

Wide Camera - 1x (M4T)

• New 1/1.3-inch CMOS sensor
• f/1.7 large aperture (2.7x light intake compared with M3T)
• Enhances low-light imaging capability
Capture Every Detail at A Distance

Medium Tele Camera - 3x

• Auto-exposure brightens dark details
• Auto-focus, quick and accurate
• New 3x camera delivers excellent image quality
Capture Every Detail at A Distance

Medium Tele Camera - 3x

In a substation scenario, 3X camera with a 35°
upward angle can capture clear meter information
from a distance of 3m.
Capture Every Detail at A Distance

Tele Camera - 7x
 New 1/1.5 inch, 48MP CMOS sensor
 168mm equivalent focal length
 f/2.8 large aperture
 In a bridge inspection scenario, a 7x camera can
capture clear images of inspection targets from a safe
distance
Capture Every Detail at A Distance

Tele Camera - 7x
In a powerline inspection scenario, 7x camera can capture
clear images of cotter pins on the opposite side of a
transmission tower, filling gaps and ensuring comprehensive
inspection coverage.
Capture Every Detail at A Distance

Foreground Stabilization
• Maintain stable and clear foreground objects when
shooting at over 10x zoom.
• In public safety, inspection, and various scenarios,
ensure target details are clearly visible.
Capture Every Detail at A Distance

Electronic Dehazing
• Enhance the imaging clarity in environments with smog and
high humidity.
• Offers low, medium, and high dehazing levels to match
different work environments and requirements.
Excel in Low-Light Environments

Night Scene Mode

• Night Scene Mode can improve the live view quality and
clarity in low light environments
• Applicable to 1x, 3x, & 7x visible light camera views
Excel in Low-Light Environments

Full-Color View Night Scene

Supporting all M4E and M4T visual cameras
Can choose different noise reduction levels (low/medium)
for optimal image quality
Excel in Low-Light Environments

Black-and-White View
Removing IR-Cut filter. Supporting only M4T 7x camera.
Combined with NIR illumination light (M4T), it can perform search and rescue
tasks in extremely dark environments
Smart Low-Light Photo

Smart Photo
• When enabled, the camera detects ambient light brightness
and dynamic range, applying intelligent image algorithms to
produce higher-quality photo.
• Performs well in high contrast, intense, or low-light
environments.
• Shooting process takes a longer time compared to standard
photo mode.
• Camera automatically switches to Auto mode.
Enhanced Thermal Capability

More Accurate Temperature Measurement

New ambient temperature sensor
Tempearture measurement accuracy (High Gain): ±2℃ or ±2%
Enhanced Thermal Capability

High-Res Live View Mode

• Provides superior thermal image quality ideal for observing
thermally-flat scenes.
• Recommended for search and rescue operations, law
enforcement, and wildlife monitoring.

Note: Temperature measurement is NOT supported in this mode. Low Gain Mode Visible Light View

High Gain Mode High-Res Live View Mode

 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Faster Precision Mapping, Easier Inspections & Effortless 3D Capture

7x Tele Camera 3x Medium Tele Camera

1/1.5 CMOS, 48 MP Effective Pixels 1/1.3 CMOS, 48 MP Effective Pixels
f/2.8, Format Equivalent: 168 mm f/2.8, Format Equivalent: 70 mm
VS M3T, pixels quantity increase by 4 times,
zoom capability increase by 2 times

Laser Range Finder Wide-Angle Camera

Measurement Range: 1800m | 5905 ft (1 Hz) 4/3 CMOS, 20 MP
Range Accuracy: 0.2 + 0.005 × D (m) f/2.8-f/11, Format Equivalent: 24 mm
0.5-Second Interval Shooting
Mechanical Shutter
In-camera distortion correction
DJI Matrice 4E
Distortion Correction, Precision Enhancement

Distortion Correction 2.0

• Factory-calibrated lens. Camera internal parameters are
included in the xmp data of the survey photos
• DJI Terra algorithm updated to be compatible with M4E

Note:
 When using DJI Terra, it is recommended to turn OFF Dewarping,
Terra will automatically apply the distortion correction.
 Dewarping can be turnen ON to simplify the workflow with third
party-software, check with provider for specifics.

M4E M3E
Rapid 0.5-Second Interval Shooting

Faster, Higher Efficiency

• 0.5s shooting interval for improved efficiency
• Maximum flight speed up of 21m/s

Note: Default speed 15m/s | ~33.5mph, using 21m/s | ~47mph will reduce the maximum flight time Wide-angle Camera
The gimbal can intelligently rotate and shoot at multiple angles based on the survey area

Multi-Directional Capture, Efficiency Multiplied

3-Directional Ortho Capture Smart 3D Capture

• Enable lateral capturing while performing • Generate a rough model on RC, then
ortho collection create detailed automated capture routes
• No additional elevation optimization route • Able to achieve mm-level GSD for digital
is required to achieve better elevation twin creation / inspections, etc.
accuracy with DJI Terra*

5-Directional Oblique Capture Surveying Quality Report

• The gimbal can intelligently rotate and
• Automatic survey quality report
shoot at multiple angles
• Comprehensive information
• Enhance the efficiency of oblique capture
• Check data completion on site

* Note: Need to use latest version of DJI Terra

 3-Directional Ortho Capture

Function Description
While collecting ortho data, M4 series supports
3-directional ortho capture, enabling lateral
capturing while performing ortho collection tasks

Function Value
• Reduces lateral overlap
• No additional elevation optimization flight route
is required to achieve better elevation accuracy

Supported Models
M4E

Applicable Scenarios
Rural areas without dense buildings *

* Note: Due to the reduction in lateral overlap, the orthophoto results may exhibit streaking effects,
so it is not recommended to use this function in densely built-up areas.
5-Directional Oblique Capture
Function Description
The gimbal can intelligently rotate and shoot at multiple
angles based on the survey area, achieving the effect of
multiple photos and angles in a single flight

Function Value
With 0.5-second interval shooting, when the GSD is
5cm/pixel, the flight speed ranges from 13.2m/s to 15m/s,
improving efficiency by 40% vs M3E

Supported Models
M4T and M4E

Difference among different drones

M3E: Front, back, and downward three-directional
M4 Series: X - shaped five-directional shooting
P1: Cross - shaped five-directional shooting.
Smart 3D Capture

Function Description
Supports capture and creation of a rough model on
the remote controller. Based on the rough model, it
can quickly generate precise mapping routes close
to a structures surface (1 meter | 3.28 feet).

Function Value
Easy to complete detailed modeling and
measurement of irregular buildings

Supported Models
M4E
Smart 3D Capture

Step 1: Rough Model Generation

Fly M4E to do a quick mapping on-site, then use

Pilot 2 to choose the mission photo file to create a
rough point cloud model

Recommended flying a oblique flight to capture

different angles of the target object/building,
400 photos or less

The current smart 3D capture function only supports M4E. Future firmware updates will support M4T.
Smart 3D Capture

Step 2: Flight Route Planning

After defining the survey area, the 3D flight plan will

be automatically generated. Parameters such as flight
speed and shooting distance can be set, and the
function supports "Refine Model".
Smart 3D Capture

Step 3: Flight Route Execution

Upload the planned route to M4E for execution.

During the execution, auxiliary images can be
flexibly used to help determine the flight direction.
Additionally, it supports setting route breakpoints to
skip dangerous routes.
Smart 3D Capture

Step 4: Survey Quality Report

After completing the flight, select the route to view the

survey quality report, which assists in evaluating the
quality of capture while still on-site.

The survey quality report includes:

- area captured
- overlap rate
- flight path execution progress
- mechanical shutter distortion correction quality
- photo count
- RTK positioning status
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Intelligent Operations With AI

AI detection FlyTo
AI models for people, vehicles, boats
Quickly face the subject
Supports alarm and quantity statistics
Automatically fly to the subject
Supports 3rd party models

Distance Measurement Cruise

Specific direction with current speed
Pin point and share the location
Easier long-distance flights
Distance displayed

Line & Area Drawing

Draw a line to measure the distance
Smart Track
Draw a polygon to calculate the area size Precision positioning
Automatic zoom adjustments

Observed View
Record observed area and center position Point of Interest
Display the observed area on the map Orbit modeling of fixed-point task
Onboard AI for Smarter Operations

Object detection and Counting

• Identification of people, vehicles, and vessels
• Maximally 128 objects can be displayed in the camera view
• Can give warnings when the type of object appears in the
camera view
Onboard AI for Smarter Operations

Object Counting in a Photo

Object counting can be displayed when you review the photo in the album
Maximally 1,000 targets in a single photo
Note: AI detection function must be enabled before taking photos

Counting in a High-Res Grid Photo

Object quantity and density can also be displayed when you review the
high-res grid photo
The recommended capture distance is within 160 meters
Efficient Flight, Intelligent Operations

FlyTo
Easily drop a pin using the laser range finder or map and
automate flight to the location.
The drone can automatically adjust its flight path and speed
based on the surrounding environment, allowing it to reach a
designated location without manual adjustments.

Cruise
Pilot the drone in a specific direction without constantly pressing
the control sticks, making long-distance flights or slow searches
easier
Efficient Flight, Intelligent Operations

Smart Track
 Can identify human, vehicles and vessels and continuously
track the selected object
 Supports manual adjustment of zoom level with the C4
wheel on RC
 Move the gimbal dial, can switch targets through C1
 Supports all visible light cameras

Point of Interest
 Orbit around a selected pin point
 Use C1 button to lock the focus point and speed
 Use C2 button to lock the gimbal direction
Laser Range Finder, Precise Measurement

Distance Measurement with LRF

 The laser rangefinder enables real-time mesurement of the distance
to the object in the center of the camera view
 Max. Range: 1800m | ~5900ft
 Accuracy (meters): 0.2 + 0.005 × D (meters)
 ASL and GPS coordinates also displayed

Coordinates of Target
 Obtain the center point position of the captured photo, making it easier
to locate fault points during inspection work.
 Center coordinates available in the image XMP metadata.
Laser Range Finder, Precise Measurement

Line Drawing
• Draw a line on the flight view to measure distances.
• Provides ground teams with accurate distance information to the
target location.

Area Drawing
• Draw an area on the flight view to measure size.
• Example: Quickly estimate the area of a brush fire.
Observed View and Real Time Display

Observed View
Record the ground area and the center position of the screen
observed by the camera, and display the observed view area on
the map.
Combined with the fixed speed function, the cognitive load of the
search and rescue pilot can be greatly reduced.
Note that the observation range needs to be deleted on the map
interface.
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI detection
• Flyto & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Software Compatibility

Pilot 2 APP FlightHub 2

• RC Plus 2 with DJI Pilot 2 App
• All-in-one cloud-based drone operations management
• Quick camera switch, real time view platform for drone operation information sharing
• Manual and multiple flight routes • New feature to remotely control M4 series via FH2

DJI Terra DJI Modify

• 2D, 3D, Point Cloud, Thermal Modeling • 3D model and point cloud model editing

DJI Thermal Analysis Tool 3.0 DJI Enterprise App

• M4T thermal image can be analyzed and processed by • Supports D-RTK 3 and runs on Android devices (including RC Plus 2)
DTAT 3.0 to detect and pinpoint temperature abnormalities
• Supports utilizing D-RTK 3 to measure GCP coordinates
FlightHub 2 - Remote Operation

Remote control available on FlightHub 2

⚫ Take off and landing

⚫ Virtual cockpit
⚫ Aircraft and camera control Flight Attitude Gimbal Camera

⚫ Launch flight route

⚫ FlyTo
⚫ Point of Interest
⚫ Custom flight area, same as Dock system

FlyTo Point of Interest

*Note：When applying for remote control of M4 aircraft on FH2, permission needs to be confirmed from RC Pilot 2
FlightHub 2 - AI Capability Access

Matrice 4 series supports real-time AI detection

via virtual cockpit operation

⚫ Remotely control M4 series for AI detection

⚫ Human, vehicle, vessel AI detection and alarm
⚫ Compatible with 3rd party AI solution based on
M4 series airbone chipset computing
⚫ Media file supports display, count, edit AI detection result
from M4 series

*Note：Currently only supports visual cameras

3D Smart Capture Flight Route

FH2 also supports 3D smart capture flight route,

simplifying complex modeling capture

⚫ New 3 Directional Ortho Capture

⚫ New Smart 3D Capture

*Note：Only supports Matrice 4 series

DJI Terra PPK Process for Photogrammetry

DJI Terra supports local PPK processing for photogrammetry through importing base station file(s).
Need to upgrade to DJI Terra V4.4 or above versions.
DJI Terra Purchase Promotion Strategy

Product Terra Trial License Activation Method

Pro Version (Only for M4E) - 1 Year

M4E
This 1-year Terra license can only process photos captured by M4E.

When the drone/payload is activated,

the corresponding DJI Terra license
M4T/M3E/M3T/M3M will be bound and automatically
activated to the same DJI account.
Electricity Version - 3 months
One PC can only activate one 3-month license.

L2

M30/M30T/M3D/M3TD No Trial Code

Note：
1. DJI Terra trial code provided by DJI.com is Electricity Version for 1-month, limited to one computer binding.
2. DJI Modify trial code provided by DJI.com is for 6 months, also limited to one computer binding
3. The same computer can bind a trial license of the same type once only
Open Developer Ecosystem

Payload SDK Mobile SDK Cloud API

Two integrated ports: Supports MSDK based on RC Plus 2 Supports the DJI Cloud API based on
E-Port and E-Port Lite for M4 series mobile APP the MQTT protocol built into Pilot 2

PSDK supports night scene mode and Series of APIs to control M4 series M4 series drones can quickly access
infrared zoom parameter settings. software and hardware interfaces the third-party cloud platform directly
through the DJI Pilot 2
AI Developer Plan

Open Onboard Computing

Provides the necessary model training tools and third-
party developer certification process, helping expand
new drone AI applications.

Open capabilities
• Supports 10 TOPS (IN8) computing capability
• This onboard computing power can be utilized to train
a customized model and detect certain types of objects
 AI Developer Plan

Obtain Model Train Upload Upload Images Distribute

Source Code Model Model for Validation Model

Download the model patch Currently only supports Upload the model to the Quantify the model and verify Model will be packaged
file and instructions from image detection algorithms developer platform the model performance based on aircraft SNs for
the developer website online or offline distribution

Currently, DJI only adapts to one typical network model structure, users need to apply the git patch file based on the yolov8 open source and then train it.
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI Detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Accessory Upgrades, Performance Leap

DJI AS1 Speaker DJI AL1 Spotlight

• Broadcast range of up to 300 meters • Illuminate subjects up to 100 meters away

• Real-time broadcasting and echo suppression • 2 modes: Always-On and Strobe

• Recorded messages, media imports, text-to-speech conversion • Intelligent gimbal following

D-RTK 3 Multifunctional Station Low-Noise Propellers

• Base, Rover and Relay mode • The propeller noise has decreased by 3.5 dB
• PPP, dm level without network connection Compared to the normal propellers
• High precision GCP/CP measurement
 AS1 Speaker + AL1 Spotlight Spec

AS1 Speaker AL1 Spotlight

92.5g (including bracket) 99g (including bracket)

Weight Weight
90g (excluding bracket) 91g (excluding bracket)

L 73mm, W 70mm, H 52mm (including bracket) L 95mm, W 164mm, H 30mm (including bracket)
Size Size
L 73mm, W 70mm, H 47mm (excluding bracket) L 79mm, W 164mm, H 28mm (excluding bracket)

Max Power 15W Max Power 32W

Maximum loudness 114dB@1m * Illumination 4.3 ± 0.2 lux @ 100 m | 328 ft, 17 ± 0.2 lux @ 50 m | 164 ft *

Effective distance 300m* | 984ft* Effective illumination angle 23 ° (10% relative illuminance)

• Real time broadcasting(echo suppression function)

• Record broadcasting 1300 m2 @100m|328ft (10% relative illuminance, normal mode)
Broadcasting method Effective illumination area
• Media import (simultaneous transmission and playback) 2200 m2 @100m|328ft (10% relative illuminance, wide FOV mode)

• Text to speech conversion (Currently only English)

Operation mode Always-On and Strobe
*Note: The data was measured in a laboratory environment at an ambient temperature of
*Note: This data was measured in a laboratory environment when the spotlight was installed
25 ℃. Actual conditions may vary slightly depending on software version, audio source,
separately on the drone at an ambient temperature of 25 ℃.
specific environment, etc. The final effect is subject to actual use.
Real-Time Voice Speaker

AS1 Speaker
• Real time broadcasting
• Recorded messages
• Media imports
• Text to speech conversion

Note: a bracket is required for individual installation

Real-time Broadcasting
In the current version, if the RC is in a closed
space such as a car, or the drone flies over 200
meters away, there may be some sound loss
during real-time broadcasting.
Gimbal-Following Spotlight

AL1 Spotlight
• 2 modes: Always-On and Strobe
• Follow the gimbal movements

More settings
• The wide FOV lighting mode can be enabled,
which provides a wider illumination range in
wide-angle view
• The gimbal follow function can be turned off on
the settings page

Note: A bracket is required for individual installation

 Gimbal-Following Spotlight

AL1 Spotlight
Clear visibility in dark environments at night
Altitude: 80m | 262ft
 Gimbal-Following Spotlight

AL1 Spotlight
Solve the problem of low light environment inspection
7X Camera shooting effect
Distance:4m | 13ft

3X Camera shooting effect

 Gimbal-Following Spotlight

AL1 Spotlight
Solve the problem of low light environment inspection
Distance:10m|32ft
More Accessories

Battery Charger Charge Hub WB37 Battery Power 1000 RC Plus 2

• 99.5 wh • Max. output power 100W （Optional） （Optional） Strap

• 4 batteries one-by-one
• 200 cycles
• Standard (100%)
• External battery for RC • 200W fast charging （Optional)
• Standby (90%)
• Can charge via RC • Fully charging one
• 0-100%, 78 min
battery in 48 minutes
High-Precision D-RTK 3 Multifunctional Station

Base Station Mode (Broadcast Mode)

• 5 GNSS systems, 19 frequencies, providing RTK broadcasting for multiple drones simultaneously
• PPP* supported, dm-level accuracy without network connection
• PPK available, with DJI Enterprise drones and DJI Terra
• Coverage: 15km | 9.32mi (FCC)

Rover Mode
• GCP collection
• High-precision IMU integrated, tilt measurement supported
• Works with new DJI Enterprise App (Android App)
• Built-in mainstream coordinate systems, same as DJI Terra

Relay Station Mode

• Effectively increase video transmission distance in tough signal scenarios (urban or valleys).
• Real-time calculation of signal occlusion, operators can dynamically adjust the position of the aircraft
and relay according to the RC prompt to obtain the best communication quality.

* Note: PPP currently only supports BeiDou PPP-B2b, will support more GNSS system in future firmware update
D-RTK 3 Multifunctional Station Features

• Small Size: Φ 163mm × 89mm, 1.26kg, hold in one hand

• Physical Buttons: Physical buttons and indicator lights used for power on/off,
mode switching, and status display
• Adaptability: Standard 5/8 inch, easy to utilize a 3rd-party pole. USB Type-C
at the bottom for charging and debugging
• OcuSync 4 Enterprise: Four external antennas, Max 25km
• Excellent Core: Self-developed RTK chip with good stability, high-
performance air dielectric antenna with physical filtering design, phase-center
accuracy ≤ 2mm. Self-developed positioning algorithm, high received signal-
to-noise ratio (SNR).
• Long Endurance: 4h/Relay, 7h/Base, 10h/Rover
• Highly Robust: IP67, -20℃ - 55°C * (-4F - 131F),
• 2m pole drop tested

Note:
* Working temperature
• DJI offers optional self-locking pole and double locking
tripods （purchased separately)
Base Station Workflow

• Switch D-RTK 3 to Base mode ( Green LED )

• Using RC to select RTK Service Type as D-RTK Base Station Broadcast RTK
• Search and connect to D-RTK 3 differential signals to
• Calibrate coordinate for D-RTK3 drones with OcuSync 4

• D-RTK 3 directly broadcasts RTK differential signals to aircraft

• The Video transmission link between the RC and the drone remains
unchanged, without going through D-RTK 3

• Note: In the Base station mode, there is no upper limit to the number of RC wirelessly connected to D-RTK 3,

drones that can be connected to a single D-RTK 3 Perform position calibration and
other configurations
D-RTK 3 Base Station Mode - Multiple Ways of Calibration

Custom Network RTK:

• Use your own CORS account for location

calibration

PPP:

• Free self-developed PPP solution that provides

decimeter level positioning with no network
connection.

Manual calibration:

• Similar to D-RTK 2 operation, deployed at

known points, manually input Base coordinates
and pole height

* Note: PPP currently only supports BeiDou PPP-B2b, will support more GNSS systems in future firmware update
Rover Workflow

Operation steps
• Download and install the APK file for DJI Enterprise APP
• Switch D-RTK3 to Rover mode (Yellow LED)
Turn on Bluetooth on Android phone
• Turn on Bluetooth on Android phone Connect D-RTK 3 through
DJI Enterprise APP
• Connect D-RTK 3 through DJI Enterprise APP
• Enter CORS configuration information to start the measurement

Note: Android device &

DJI Enterprise APP can also be used on RC Plus 2 Enterprise remote controller. DJI Enterprise APP
DJI Enterprise APP can be downloaded from DJI D-RTK 3 product website
Rover Mode
Integrate mainstream coordinate systems One click import to DJI Terra
• Built-in mainstream coordinate database, same as the • Supports 2 GCP/CP export formats: JSON & CSV
coordinate systems in DJI Terra, can directly output • JSON format allows direct import to DJI Terra and
horizontal coordinates automatically matches the accuracy of GCP's
Relay Workflow

Operation steps <25km

• Switch D-RTK3 to Relay mode (Blue LED)

• Place D-RTK3 at a high point (can effectively avoid the impact of obstruction
and obstacles on image transmission, and improve the working range)
• Suggested distance:
• RC & Relay ＜1km | .62mi,
<1km
• Drone & Relay ＜25km | 15mi
• Seamless switching:
• During flight, the drone will simultaneously connect to the remote
control and relay, and automatically select one link as the main link and
the other as the backup link based on the strength of the signal.
• Applicable scenarios:
• Scenes with more obstruction, such as cities and forests; The relay can
also be mounted on large drones for emergency scenarios.

• Note: In relay mode, only one drone can be relayed .

Relay Workflow

Occlusion perception, dynamically adjust

• Through the visual SLAM algorithm of the drone, in real time it will
analyze the environment around the relay, RC, and drone. When
there are obstacles, prompt messages will appear on the RC.
• Pilots can control and adjust the drone’s position, to achieve optimal
communication quality.
D-RTK 3 Multifunctional Station Functional Compatibility
Function Supported Drone Models
Relay Mode M4E, M4T, and subsequent models

Base Station Mode

M4E, M4T, and subsequent models
(Full functions)

Enterprise:
DJI M3D/3TD drone, M300/M350 RTK, M30 series, M3E/T Enterprise series

Base Station Mode Agriculture:

(Basic functions)* T50/T25, T40/T20P, DJI FlyCart 30

Professional Film:
DJI Inspire 3

Supports Bluetooth 5.1 and is compatible with Android 9 and above systems. Some phones
Rover Mode
may have compatibility issues

*Note: Basic functions means only supporting manual input of coordinates to the D-RTK 3
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI Detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Country Version

• EU Version
With Low noise propellers and C2 label
Available for EU, UK, Hong Kong

• Universal Version
Available for region except China Mainland,
EU, UK, Hong Kong
In the Box

Matrice 4 Series

Items Quantity Note

Aircraft Body 1 Includes microSD card
Excludes WB37 battery and
Remote Controller 1
RC strap / bracket

Battery 1

• EU: Low noise propellers

Propeller（Pair） 3 • Universal: Normal propellers
• Demo unit: Both Low noise and normal propellers

Charger 1 With power cable

Charging Hub 1

USB-C to USB-A cable

Power Cable 2
USB-C to USB-C cable

Carrying Case 1 Safety case and shoulder strap

Pry Bar 1 Open 4G dongle compartment

Manuals 1 Quick start guide, Safety guideline

 Category Function M4T M4E M3T M3E Note
Max Horizontal Speed (N mode) 21m/s 21m/s 15m/s 15m/s
Max Ascend Speed (N mode) 10m/s 10m/s 6m/s 6m/s
Max Descent Speed (N mode) 8m/s 8m/s 6m/s 6m/s
Supports quick takeoff by home point vision update ✓ ✓
Low-light Positioning & Obstacle Avoidance ✓ ✓
General Capability
M4E/T: RTK module integrated
RTK ✓ ✓ ✓ ✓
M3E/T: Sold and installed separately
GNSS anti-jamming/spoofing ✓ ✓
Vision Assist ✓ ✓ ✓ ✓ Downward Vision Assist added for M4E/T
M4E/T: 4G dongle compartment with antenna integrated
4G Enhanced Transmission ✓ ✓ ✓ ✓
M3E/T: External attachment accessory required

M4T: New 1/1.3 CMOS with f/1.7 aperture brings 2.7x more light than M3T,
enhancing low-light imaging capability.
1× Wide Camera ✓ ✓ ✓ ✓
M4E: Same wide-angle mapping camera with M4E, factory-calibrated, higher
accuracy.

Visible Light Camera 3× Medium Tele Camera ✓ ✓ M4E/T: 1/1.3 CMOS, 48 MP Effective Pixels, f/2.8, Format Equivalent: 70 mm

M4E/T: 1/1.5 CMOS, Format Equivalent: 168 mm; 48 MP Effective Pixels, 4x

7× Tele Camera ✓ ✓ ✓ ✓ of M3E/T; Aperture f/2.8, light intake increased by 2.5x; doubled the max zoom
capability from the previous generation(56x), with clearer details.

1×, 3×, 7×, 14×, 28×, 56×, 128× Zoom Control ✓ ✓ M4E/T: Support side button for zoom control
Smart Photo ✓ ✓ ✓ ✓
High-Res Grid Photo ✓ ✓ ✓ ✓
Photo & Video
Video Pre-recording ✓ ✓
PIV (Photo in Video) ✓ ✓ ✓ ✓
Mode: Auto / On / Off ✓ ✓
Electronic Dehazing
Supports low/mid/high when enabled ✓ ✓
Lens Dehazing Lens dehazing by self-heating ✓ ✓
Mode: Auto / On / Off ✓ ✓
Noise Reduction Level: High(5 fps) / Medium(15 fps) ✓ ✓
Night Scene Mode
Black and white night vision (IR filter OFF) ✓ Only supports 7× tele camera on M4T.
NIR light ✓ Only supports 7× tele camera on M4T.
 Category Function M4T M4E M3T M3E Note
M4T Low Gain: 0℃ to 550℃
Gain Mode: Low / High ✓ ✓
M3T Low Gain: 0℃ to 500℃
Infrared Thermal Camera High-Res Live View Mode ✓
M4T: Can always be turned ON.
UHR Infrared Image ✓ ✓
M3T: Can only be turned on in well-lit environments.
Laser Range Finder Measurement Range: 1800 m ✓ ✓
Human, cars, boats detection ✓ ✓
AI Identification
AI Enhanced High-Res Grid Photo ✓ ✓
Pinpoint ✓ ✓ ✓ ✓
Range Detection ✓ ✓
POI ✓ ✓ ✓ ✓
Look At ✓ ✓ ✓ ✓
Smart Feature Cruise ✓ ✓
Smart Track ✓ ✓
FlyTo ✓ ✓
Line & Area Drawing ✓ ✓
Observed View ✓ ✓
AI Spot Check in Waypoint Route ✓ ✓ ✓ ✓
Area Route - Ortho - Smart Oblique (3D) ✓
M4E: Only requires 1 flight path.
Area Route - Oblique - Smart Oblique (5D) ✓ ✓ ✓
M3E: Smart Oblique requires 2 flight paths.
Linear Route ✓ ✓ ✓ ✓
Flight Route Feature M4E: Supports all flight directions.
Real-time Terrain Follow ✓ ✓ ✓ ✓
M3E: Only supports forward and backward directions.
Slope Route ✓ ✓ ✓ ✓
Geometric Route ✓ ✓ ✓ ✓
Smart 3D Capture ✓
Obstacle bypass during task ✓ ✓
AS1 Speaker: voice recording, media imports, text-to-
✓ ✓ ✓ ✓ M3E: Not supporting real-time broadcasting.
speech conversion, real-time broadcasting.
Accessory
DJI AL1 Spotlight: Gimbal Link, always-on and strobe
✓ ✓
modes.
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI Detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Improvements for Public Safety

Use Scenario
Public safety professionals put the M4 series to the test as a quick-deploy solution from
the trunk of their vehicle.

Advantages
• Night Scene Modes: Huge leap forward in low light scenarios vs M30T and M3T
• Smart Capture Photo Mode: Captured evidence in low light
• High Res IR Gain Mode: Better visibility of hotspots with smaller temp difference.
• Fly to Pin: Huge benefit for automating flight to a pin location dropped on map.
• Draw Line / Polygon: Easily estimate distances for team members on the ground or area of
a fire.
• RC Plus 2 Button Backlighting: Better visibility for key RC buttons at night.
• AI Assistant: Did well with pinging people and cars, alert option to help operator during
search.
• Observed View: Clear benefit for SAR operations or grid searches for people.
• Pre-Recording: Previous issue of just missing something due to not recording resolved.
• Speaker/Spotlight: Work with K9 team for announcements or verify hotspots with spotlight.
• Cruise Control: Keep a steady forward pace while focusing on scanning for heat signatures.
Surveying with 3-Directional Ortho

Use Scenario
With the introduction of new Three-directional Ortho Capture, surveying customer like
SurvAir significantly reduces flight time while maintaining the necessary side overlap ratio for
large scale topographic and architectural survey.

Efficiency
Capture Mode Estimated Duration Number of Photos
Improvement
Three-Directional
47 minutes 3,815 44% faster flight time
Ortho Enabled
Three-Directional Fewer photos, but
1 hour 24 minutes 2,268
Ortho Disabled longer flight time

Advantages
• The use of Three-Directional Ortho Capture with Matrice 4 Enterprise
demonstrates a 44% reduction in flight time, enabling faster data acquisition
while ensuring sufficient coverage and side overlap. This leads to a highly
efficient data capture experience.
• The enhanced operational efficiency makes this mode particularly valuable for
large-scale surveying missions, especially in regions with minimal elevation
differences.
Documenting Sinkhole Decay at High Resolution
Use Scenario

A Drone Service Provider was hired to capture a large gourge near Niagra Falls.
With complex surfaces, a detailed 3D flight plan was needed. Documentation
of sinkhole is required for further planning on minimizing erosion & property
damage

Advantages
• 0.5 second trigger speed allows quick & efficient capture
• Large 4/3" sensor size assures capturing every detail across many
lighting conditions
• 3D Capture guarantees even model GSD (down to sub-mm), even
when capturing complex assets/scenes
• More onboard processing to help support quick 3D capture flight
planning on the controller in the field
• DIstortion Correction 2.0 helping to capture a more accurate photo
• RTK Image Tagging/PPK logging for accurate global alignment
Optimizing Power Line Inspections
Use Scenario & Challenge

Distribution assets must be scanned with infrared camera to find any hotspots. Previously
the pilot must try to keep a constant speed themselves while flying over assets and
focusing on multiple items. Also remembering to set and adjust temperature for more
accurate measurement.

Visual inspections required team to either get closer to asset for 1x or farther away for 7x
to capture full resolution photos.

Advantages

• Cruise Control + Temperature Alarm allows the pilot to fly IR inspections at a

set speed over long linear assets while "steering" the drone to make small
adjustments, environmental temperature automatically adjusted to improve
live temperature readings.
• Visual insepction quality and speed is optimized through foreground
stabilization and quick switch between 3 visual camera FOV options.
 01 02 03 04 05
Overview Flight Safety Cameras Mapping Intelligence
• Product Intro • Vision Positioning • Zoom Capability • 3 - Directional Ortho • AI Detection
• FlyTo & Cruise
• Aircraft Specs • Anti Interference • Night Scene Mode • 5 - Directional Oblique
• Line & Area Drawing
• RC Plus 2 Specs • Terrain Data Preloading • Thermal Capability • 3D Smart Capture • Observed View

06 07 08 09 10
Software Accessory Others Use Cases After Sales
• FlightHub 2 • Speaker • Country Version • Search and Rescue • Matrice 4 Series

• Terra • Spotlight • In the Box • 3D Smart Capture • D-RTK 3

• AI Developer • D-RTK 3 • Product Comparison • Powerline Inspection • FAQ

Matrice 4 Series - DJI Care Enterprise
Service Type DJI Care Enterprise Plus

First Year Care: Bind one year of DJI Care Enterprise Plus in U.S., Canada, the UK, EU countries, Switzerland, Norway,
Sales Model Liechtenstein, Iceland, Serbia, Monaco, Australia, Japan, South Korea, Mexico, Hong Kong.
Renewal Care: Sold separately.

First Year Care: Automatic activation mode, service takes effect upon new device activation
Service Binding Renewal Care: Use the activation code on the Care activation page to bind.

Validity Period: 1 year

Service Period Renew Plus Plan up to twice

• Free Repair Services; Sharing Coverage

Service Content • Flyaway Coverage Once A Year
• Free Two-Way Shipping；Water Damage Coverage

Covered Parts Aircraft (including RTK module), compatible gimbal camera, battery, propellers, remote controller, charging hub.

Renew DJI Care Enterprise Plus can be purchased when the product meets all of the following criteria
Binding Requirement • DJI Care Enterprise Plus has been purchased, and the total service binding period does not exceed two years.
• DJI Care Enterprise Plus purchased has not yet expired or expired within 15 days

Sales PI System，DJI Store（only for DJI Care Enterprise Renew，only available in the United States, Europe, and the United
Sales Channels Kingdom.）
Matrice 4 Series - DJI Care Enterprise-Activation Mode Introduction
After successfully activating the equipment in APP Pilot 2, the APP will automatically pop up the DJI Care Enterprise service binding page. Fill in
the relevant information to complete the service binding.

Information filling instructions

• Register and bind DJI Care Enterprise information on the page. User information is divided into 'Personal' and 'Enterprise' sections. Users fill in
according to their actual situation, with 'Personal' selected by default. The email defaults to the one registered during equipment activation and
can be modified.
• Tap the activation button to submit the DJI Care Enterprise binding.
Once the information is submitted, it cannot be modified.

Explanation for no pop-up or unfilled

information
• If you choose to skip the DJI Care Enterprise service binding page, or if
the page does not pop up due to server or network issues, the DJI Care
Enterprise service will automatically bind to the equipment within 24
hours after Activation. The default DJI Care Enterprise user information is
the APP account information at the time of equipment Activation.
• If the DJI Care Enterprise user information is incorrect, please contact
DJI call center for modification.
Matrice 4 Series - DJI Care Enterprise-Instructions for coverage sharing
The protection Amount for multiple pieces of equipment can be Scenario 1: Multiple Plus automatic Activation combos for Amount
accumulated and shared, with no upper limit on the number of sharing. Is it supported? How to operate?

bound equipment and accumulated Amount. Supported. The user should first activate the equipment, and the
Enterprise version binding takes effect; then fill out the questionnaire to
apply for amount sharing.
Since the first-year flagship version of DJI Matrice 4E / DJI Matrice
4T is in automatic Activation mode, it only supports binding DJI
Scenario 2: The Enterprise version auto-activation combo shares the
Care Enterprise to a single piece of equipment. If multiple pieces of amount with the previously purchased Enterprise version. Is it supported?
equipment choose the Amount sharing rights, you can submit an How to operate?
application questionnaire on the DJI Care Enterprise official Supported. The customer should first activate the equipment, and the
website, register the SN information that needs Amount sharing, Enterprise version binding takes effect; then fill out the questionnaire to
and DJI will review and bind it within 3 to 5 business days. After apply for amount sharing.

review and binding, the protection Amount can be accumulated

Scenario 3: If you purchase the DJI Care Enterprise version separately for
and shared. Note: Please make sure to activate the equipment first,
other DJI Enterprise products and want to share the amount with the DJI
bind the flagship version, and then submit the information for
Care Enterprise version auto-activation, is it supported? How to operate?
Amount sharing.
Supported. The separately purchased Enterprise version has a
corresponding activation code, which can be used on the <DJI Care
Enterprise official website page> to bind and operate amount sharing.
Matrice 4 Series - Extended Warranty Service

DJI Matrice 4E / DJI Matrice 4T Extended Warranty Service Introduction

In regions not covered by Overseas Care, a one-year extended warranty service will be provided,
Service Content extending the warranty period by one year.

Covered Areas Areas not covered by DJI Care Enterprise.

Covered Parts Aircraft (including RTK module), compatible gimbal camera, remote controller, charging hub.

Binding No binding is required; The warranty period is automatically extended by one year upon device shipment. The
Requirement customer can check the warranty information through the DJI device information inquiry page.
Matrice 4 Series - Maintenance

DJI Matrice 4E / DJI Matrice 4T Maintenance Program Introduction

Maintenance Maintenance
Maintenance Items Launch Regions
Type Interval

Mainland China, North America,

Deep Clean、Parts Inspection、Update &
Basic Service Calibration
According to actual usage the European Union, the United
Kingdom, Australia, Japan

Mainland China, North America,

Deep Clean、Parts Inspection、Update &
the European Union, the United
Standard Service Calibration、Easily Worn Parts Replacement Flight Time 200H orA year
Kingdom, Australia (excluding
(Propellers, dampening balls, etc. )
Japan)
D-RTK 3 - DJI Care Enterprise
Supported Product D-RTK 3 Multifunctional Station
Mainland China, US, Canada, Australia, Japan, South Korea, EU countries, UK, Switzerland, Norway, Liechtenstein,
Covered Areas Iceland, Serbia, Monaco, Mexico（Not include Hong Kong, repair services are not available in Hong Kong）
First Year Care: Sold separately
Sales Model Renewal Care: Sold separately
First Year Care: Use the activation code on the Care activation page to bind.
Service Binding Renewal Care: Use the activation code on the Care activation page to bind.
Service Type DJI Care Enterprise Basic DJI Care Enterprise Basic (2-Year Plan) DJI Care Enterprise Plus
Validity Period: 1 year
Validity Period: 2 years Validity Period: 1 year
Service Period Renew Basic Plan up to
Renew Basic Plan once Renew Plus Plan up to twice
twice
Water Damage Coverage; Free Two-Way Shipping
• Unlimited free repair services within the
Service Content • 2 low-Cost Replacements • 4 low-Cost Replacements coverage amount
• DJI Care Express • DJI Care Express • Unlimited Sharing Coverage for Your
Whole Fleet
Covered Parts Base station, Antenna*8

First binding DJI Care Enterprise can be purchased if the product meets one of the following criteria:
1. Brand new and un-activate 2. Activated less than 15 days
Binding 3. Less than 72 hours have passed after the DJI Enterprise device was repaired by an official DJI Service Center
Requirement Renew DJI Care Enterprise Plus can be purchased when the product meets all of the following criteria:
• DJI Care Enterpriseis purchased and the total purchased and bound service duration does not exceed 2 years
• DJI Care Enterprise purchased has not yet expired or expired within 15 days

Sales Channels Sales PI System，DJI Store（only for DJI Care Enterprise Renew）
 FAQ
Question Answer
What is the certification level of DJI Matrice 4 Series in Europe? DJI Matrice 4 Series is C2 certified by the European Union Aviation Safety Agency (EASA).
Is DJI Matrice 4 Series waterproof? No. Avoid contact with water during use as it may lead to damage of the device
Is the RTK module of the DJI Matrice 4 series removable? No.
DJI RC Plus 2 Enterprise Edition and DJI RC Plus 2 Enterprise Enhanced Edition. Among them, the DJI RC Plus
What remote controllers are supported by the DJI Matrice 4 Series? 2 Enterprise Edition is the standard remote controller for the DJI Matrice 4 Series, while the DJI RC Plus 2
Enterprise Enhanced Edition needs to be purchased separately.
What are the differences between DJI RC Plus 2 Enterprise Edition and DJI RC Plus The DJI RC Plus 2 Enterprise Enhanced Edition has added expansion interface components, making it
2 Enterprise Enhanced Edition? compatible with more industry products.
Does the DJI RC Plus 2 Enterprise Remote Controller support the DJI Mavic 3
No.
Enterprise Series drones?

How to Charge the DJI Matrice 4 Series Battery? The DJI Matrice 4 Series batteries can only be charged using the DJI Matrice 4 Series Battery Charging Hub.

How long does it take to fully charge an Intelligent Flight Battery of DJI Matrice 4 78 minutes for standard mode with charging hub to achieve fully chanrged
Series? 60 minutes for ready-to-fly mode with charging hub to achieve 90% charged
Does the DJI Matrice 4 Series support aircraft charging? No.
Does the DJI Matrice 4 Series battery support self-heating functionality? No.
Which aircraft are compatible with the AS1 Speaker and AL1 SpotLight? Support for use with DJI Matrice 4 Series aircraft.
Which languages does the DJI AS1 speaker support for text-to-speech? Currently only supports Mandarin Chinese and English.
What accessories of DJI Matrice 4 Series and DJI Mavic 3 Enterprise Series are
No.
interchangeable?
Does DJI Matrice 4 Series support dual controls? No.

D-RTK 3 Enterprise can support Base Station Mode; Rover Mode and Relay Station Mode
What are the differences betweek Enterprise D-RTK 3 and Agriculture D-RTK 3?
D-RTK 3 Agriculture can only support Base Station Mode

In which countries or regions is the D-RTK 3 multifunctional base station relay In countries such as Japan, Kazakhstan that do not support the 5GHz frequency band, the D-RTK 3 multi-
mode NOT supported? function base station does not support relay mode.