YUEQING FEEO

ELECTRIC CO.,LTD FSP-D40

Type2 Solar DC Surge Protective Device (DC SPD)

FSP-D40
Application
Surge protective device, protect against lightning surge
voltages in solar system (photovoltaic power supply
system). These units must be installed in parallel on

Solar DC Surge Protective the dc networks to be protected and provide common

and different modes protection. Its installed location are

Device (DC SPD)

recommended at both ends of the dc power supply line
(solar panel side and inverter/converter side), especially
if the line routing is external and long. High energy
MOVs equipped with specific thermal disconnectors and
related failure indicators.

Specifications FSP-D40 Surge protector FSP-D40

PVDC - specific EN50539-11
Pole 2P 2P 3P 3P 2P(COSTOMIZED)
Electrical parameter
Integrated Molding Base
Classified test II II II II II
Uoc max (VDC ) 600 800 1000 1500 12/24
Uc ( VDC ) 600 800 1000 1500 12/24
ln (8 /20 )us ( kA ) 20 20 20 20 20
Modular Type
lma x (8 /20 )us ( kA ) 40 40 40 40 40
Easy To Be Replaced
Up ( kV ) 2.0 2.5 3.8 5.3 2.0

Remote Signal Contact Remote Maximum working voltage (V) 250VAC/30VDC 250VAC /30VDC
signal Maximum working current (A ) IA ( 250 V /AC ) IA ( 250V/AC ) IA (250V /AC )
contact I A ( 30 V DC ) IA (30V/AC ) IA (30V /AC)

Installation and Dimensions Wiring Hard wire 4~25 4~25

capacity(mm2) Flexible wire 4~16 4~16
Stripping length(mm ) 10 10
Terminals crcwa M5 M5
Main circuit 3.5 3.5
Torque (Nm )
Remote signal contact 0.25 0.25
All profile IP40 IP40
Protection class
Connection port IP20 IP20
Installation environment No obvious shock and vibration
Altitude (m) ≤2000 ≤2000
Working Temperature -30℃ ~ +70℃ -30℃ ~ +70℃
Relative humidity 30%~90 % 30%~90 %
How to install Installed with H 35-7.5/DIN35 steel mounting rail
W 36 54
Size (mm )
H 90 90
(W x H x L )
L 67.6 67.6
Weight (kg ) 0.24 0.36

13 FEEO Electric FEEO Electric 14