GE Healthcare

Datex-Ohmeda S/5 Monitors

Supplies and Accessories
 Datex-Ohmeda S/5 Monitors
Supplies and Accessories

Conformity according to the Council Directive 93/42/EEC concerning Medical Devices

CAUTION: U.S. Federal law restricts this device to sale by or on the order of a licensed medical practitioner.
Outside the USA, check local laws for any restriction that may apply.

All specifications are subject to change without notice.

Document no. M1023052-02

October, 2004

Datex-Ohmeda Inc. Datex-Ohmeda Division,

P.O. Box 7550 Instrumentarium Corporation
Madison, WI 53707-7550, USA P.O. Box 900
Tel: +1-608-221 1551 FI-00031 DATEX-OHMEDA, FINLAND
Fax: +1-608-222 9147 Tel: +358 10 39411
Fax: +358 9 1463310
www.us.datex-ohmeda.com www.datex-ohmeda.com

© 2004 General Electric Company. All rights reserved.

 Supplies and Accessories

Table of contents
1 About this document 1
2 Instructions for use 3
Multi-Link ECG accessories .............................................................................................................................. 3
NIBP cuff hoses ............................................................................................................................................... 4
OxyTip+ pulse oximetry accessories.................................................................................................................. 5
Temperature adapter cables ............................................................................................................................ 6
Invasive blood pressure adapter cables............................................................................................................ 7
3 List of accessories 9
ECG accessories............................................................................................................................................ 10
NIBP accessories........................................................................................................................................... 12
Pulse oximetry accessories ............................................................................................................................ 13
Temperature accessories ...............................................................................................................................13
Invasive pressure accessories ........................................................................................................................ 14
Hemodynamic accessory kits ......................................................................................................................... 14
Airway gas accessories .................................................................................................................................. 14
Spirometry accessories.................................................................................................................................. 14
Cardiac Output accessories ........................................................................................................................... 15
SvO2 accessories.......................................................................................................................................... 15
EEG accessories............................................................................................................................................ 15
NMT accessories ........................................................................................................................................... 16
Tonometry accessories .................................................................................................................................. 16
Entropy accessories....................................................................................................................................... 16
BIS accessories............................................................................................................................................. 16
Mounting elements........................................................................................................................................ 16
Simulators .................................................................................................................................................... 17
Device Interfacing Solution ............................................................................................................................ 17
Interfacing Cables ......................................................................................................................................... 17
Other ............................................................................................................................................................ 18
 Supplies and Accessories

1 About this document

This document introduces the accessories for the Datex-Ohmeda S/5 monitors, and provides
supplemental instructions. Also refer to the “User's Guide.” Some of the information in this
document may already be included in the “User's Guide” that you have. For those accessories that
do not have instructions for use included in this document, please, refer to the accessory package.
IMPORTANT: This document contains very important information about these
accessories and their use, please keep it in a safe place near other user
documentation.

WARNING: Use only defibrillator-proof cables and invasive pressure transducers

approved by Datex-Ohmeda. Using other cables and transducers may cause a
safety hazard. Protection against cardiac defibrillator discharge is due in part to
the accessories for pulse oximetry (SpO2), temperature (T), and invasive
pressure (P) measurement.

NOTE: Please refer to the “User's Guide” for other warnings and cautions.

Calibration check of temperature, NIBP and invasive blood pressures

Calibration check of temperature, NIBP and invasive blood pressures should be performed at least
once a year by qualified service personnel. Please see the "Technical Reference Manual."

1
Datex-Ohmeda S/5 Monitors

2
 Supplies and Accessories

2 Instructions for use

All these accessories are indicated for use by qualified medical personnel only.

Multi-Link ECG accessories

R=RED (IEC) R=RED (IEC) L=YELLOW (IEC)
1. Multi-Link 5-lead or 12-lead
L=YELLOW (IEC)
RA=WHITE (AAMI) LA=BLACK (AAMI) RA=WHITE (AAMI) LA=BLACK (AAMI)
standard cable
LEAD I
2. Multi-Link leadwire set (3 or
R/RA L/LA
R/RA L/LA
V1 V2 V6

5 leads)
V3
V4 V5
LEAD III

LE 1 2
AD 3 6
II 4 5
F/LL 3. Multi-Link leadwire set
F=GREEN (IEC)
N/RL
N=BLACK (IEC)
F/LL
F=GREEN (IEC)
(C2-C6 IEC, V2-V6 AHA)
LL=RED (AAMI) RL=GREEN (AAMI) LL=RED (AAMI)

RL

1
RA

RA

1
LA
LA
LL
V
2
2 V1
345
6

V2

3
V3
V4
V5
RL LL V6

1
2

Intended use Disinfection

Wipe the cleaned product with chemical disinfectant, such as
Multi-Link ECG accessories enable ECG monitoring with new ethanol, isopropanol, phenolic disinfectant or glutaraldehyde.
Datex-Ohmeda S/5 modules. NOTE: Do not immerse the products in liquids. Protect from
Starting measurement strong UV radiation.
Sterilization
1. Connect the trunk cable to the monitor.
2. Connect the leadwire set to the trunk cable. Sterilize with ethylene oxide (EtO) at a max. temperature of
• For 3-lead ECG, use the Multi-Link 3-lead ECG cable 50°C/122°F or with STERRAD® Systems. After ethylene oxide
with integrated leadwires or connect a 3 leadwire set sterilization, follow the recommendations of the sterilizer
to the Multi-Link 5- or 12-lead ECG trunk cable. manufacturer for the required aeration period.
• For 5-lead ECG, connect a 5 leadwire set to the Multi-
Link 5- or 12-lead ECG trunk cable. Precautions
• For 12-lead ECG, connect a 5 leadwire set together Use only supplies and accessories approved by Datex-Ohmeda
with a 5 leadwire C2 -C6 or V2 -V6 set to the Multi- for proper and accurate functioning of measurement. Using
Link 12-lead ECG trunk cable. components other than the ones supplied might result in a
3. Prepare the skin: shave any hair from the selected measurement error. Ensure proper contact of the
electrode sites, and clean and dry the skin. electrosurgery unit return electrode to the patient to avoid
4. Attach the electrodes to the correct positions. See the burns at monitor measurement sites. Do not allow humidity or
monitor user documentation for instructions on liquid to enter the cables. Do not use cables if you see any
positioning the electrodes. visual signs of damages.
5. Connect the leadwire set to the electrodes.
CAUTION
Maintenance Federal (USA) law restricts this device to sale by or on the order
Before use, check that the product is intact and clean. of a physician.
NOTE: Do not treat the cables with oils (like household or
lubricating) or aggressive fluids or solvents (like acetone). Ordering information
Cleaning For further information, please consult the Supplies &
Try to avoid excessive use of liquids. Wipe with a cloth Accessories catalog http://supplies.datex-ohmeda.com or
moistened with mild detergent or soap solution. Allow the your local sales company.
product to dry completely after cleaning.

3
Datex-Ohmeda S/5 Monitors

NIBP cuff hoses

1. Cuff hose

1
2. Cuff of correct size
2

X LINE
INDE

Intended use Sterilization

The cuff hose is used for connecting the NIBP cuffs to new The cuff hoses can be sterilized with ethylene oxide mixture
Datex-Ohmeda S/5 modules. The black adult cuff hose (EtO) at a maximum temperature of +50°C or with
includes cuff identification and is recognized by the STERRAD® Systems. After ethylene oxide sterilization,
monitor as an adult cuff hose. The light blue infant hose follow the recommendations from the sterilizer
does not include cuff identification and thus the pediatric manufacturer for required aeration period.
NIBP mode has to be selected in the monitor menu.
Precautions
Starting the measurement
Use only supplies and accessories approved by Datex-
1. Connect the cuff hose to the adult size NIBP cuff by Ohmeda for proper and accurate functioning of
placing opposite connectors in contact and locking measurement. Using components other than the ones
them together. supplied might result in a measurement error. Mating
2. Plug the NIBP cuff hose to the monitor or module. connectors with force without proper alignment may
3. Refer to the monitor user documentation for detailed damage the connectors and prevent proper airflow to the
information. cuff. Make sure no liquid enters the hose.
NOTE: O-rings of hose connectors should be lubricated
from time to time. CAUTION
Federal (USA) law restricts this device to sale by or on the
Maintenance order of a physician.
Cleaning
Try to avoid excessive use of liquids. Wipe with a cloth Ordering information
moistened with mild detergent or soap solution. For further information, please consult the Supplies &
Accessories catalog http://supplies.datex-ohmeda.com or
Disinfection your local sales company.
Disinfect with a chemical disinfectant, such as ethanol
(70%), isopropanol, phenolic disinfectant or aldehydes.

4
 Supplies and Accessories

OxyTip+ pulse oximetry accessories

OXY-E-UN
1. OxyTip+ Interconnect cable

OXY-SE-3

OXY-F-UN

1 OXY-W-UN

OXY-AP OXY-AF

Intended use Sterilization

Do not sterilize the sensor or cable.
OxyTip+ Interconnect Cable connects OxyTip+ SpO2
sensors to new Datex-Ohmeda S/5 modules.
Precautions
Starting the measurement Use only supplies and accessories approved by Datex-
1. Connect the Interconnect Cable to the module. Ohmeda for proper and accurate functioning of
2. Connect the selected SpO2 sensor to the Interconnect measurement. Using components other than the ones
Cable. supplied might result in a measurement error. Mating
connectors with force without proper alignment may
damage the connectors and disrupt the electrical
Maintenance continuity.
Cleaning
Try to avoid excessive use of liquids. Wipe with a cloth CAUTION
moistened with mild detergent or soap solution. Do not Federal (USA) law restricts this device to sale by or on the
spray or soak the connectors. order of a physician.

Disinfection Ordering information

Spray or wip with pad moistened with 70% alcohol or 3.4% For further information, please consult the Supplies &
gluteraldehyde (Cidex). Although discoloration may occur, Accessories catalog http://supplies.datex-ohmeda.com or
you may also use 1.6% phenol (Sporicidin), quaternary your local sales company.
germicides (Virex), or 0.5% sodium hypochlorite.

5
Datex-Ohmeda S/5 Monitors

Temperature adapter cables

2 1. Adapter cable for temperature
probes
2. Reusable temperature probe
2
3. Adapter cable for disposable
1
temperature probes

4
4. Disposable temperature probe
interconnect cable
1 3

Intended use Sterilization

Sterilize with ethylene oxide gas (EtO) at a maximum
The temperature adapter cables are intended to be used temperature of +50 °C/ 122 °F or with STERRAD®
for connecting one or two reusable or disposable Systems. After ethylene oxide sterilization, follow the
temperature probes to new Datex-Ohmeda S/5 modules. recommendations from the sterilizer manufacturer for
required aeration period.
Starting the measurement
1. Connect the adapter cable to the monitor or module. Precautions
2. Connect the other end of the adapter cable to the
Use only supplies and accessories approved by Datex-
reusable temperature probe or to the disposable
Ohmeda for proper and accurate functioning of the
temperature interconnect cable.
measurement. Substitution of a component with other than
3. Connect the disposable temperature probe to the
that supplied might result in measurement error.
disposable temperature probe interconnect cable.
Mating connectors with force without proper alignment may
Maintenance damage the connectors and disrupt the electrical
continuity.
Cleaning
Do not entwine this cable with other electrical cables.
Try to avoid excessive use of liquids. Wipe with a cloth
moistened with mild detergent or soap solution.
CAUTION
Disinfection Federal (USA) law restricts this device to sale by or on the
Disinfect with a chemical disinfectant, such as ethanol, order of a physician.
propanol, phenolic disinfectant or glutaraldehyde
NOTE: Do not immerse the cable in liquids. Ordering information
For further information, please consult the Supplies &
Accessories catalog http://supplies.datex-ohmeda.com or
your local sales company.

6
 Supplies and Accessories

Invasive blood pressure adapter cables

1. Adapter cable for the InvBP
transducer
2. Transducer
3. Adapter cable for dual InvBP
measurement

Intended use Sterilization

Sterilize with ethylene oxide gas (EtO) at a maximum
These invasive blood pressure adapter cables are intended temperature of +50 °C/ 122 °F or with STERRAD®
to be used for connecting one or two invasive blood Systems. After ethylene oxide sterilization, follow the
pressure transducers to new Datex-Ohmeda S/5 modules. recommendations from the sterilizer manufacturer for
required aeration period.
Starting the measurement
1. Connect the single adapter cable to suitable Precautions
transducer products for which it is designed.
Use only supplies and accessories approved by Datex-
2. Plug the adapter cable to the module, or to the dual
invasive pressure adapter cable if two invasive Ohmeda for proper and accurate functioning of the
measurement. Substitution of a component with other than
pressures are monitored simultaneously.
that supplied might result in measurement error.
3. Please, refer to the monitor’s user documentation for
detailed information. Mating connectors with force without proper alignment may
4. When the invasive blood pressure monitoring is damage the connectors and disrupt the electrical
completed, disconnect the cable from the transducer continuity.
product and monitor.
Do not entwine this cable with other electrical cables.
Maintenance
CAUTION
Cleaning
Federal (USA) law restricts this device to sale by or on the
Try to avoid excessive use of liquids. Wipe with a cloth order of a physician.
moistened with mild detergent or soap solution. Allow the
product to dry completely after cleaning.
Ordering information
Disinfection For further information, please consult the Supplies &
Wipe the cleaned product with a chemical disinfectant, Accessories catalog http://supplies.datex-ohmeda.com or
such as ethanol, propanol, phenolic disinfectant or your local sales company.
glutaraldehyde
NOTE: Do not immerse the cable in liquids.

7
Datex-Ohmeda S/5 Monitors

8
 Supplies and Accessories

3 List of accessories
The accessories below are approved and specified for the Datex-Ohmeda S/5 monitors. Patient accessories
designed for use with these devices are made of biocompatible materials conforming to requirements of the
standard EN 30993 Biological Evaluation of Medical Devices and therefore do not contain toxic ingredients or
primary skin irritants. The conformity is based either on laboratory testing or material knowledge and the long
history of the materials used. Please note that some products are not available worldwide. You can check the
availability with your local Datex-Ohmeda office or distributor. Please, also refer to our catalog:
http://supplies.datex-ohmeda.com/DO

Explanation of symbols
Symbol What it means
Batch code
Catalog number
Does not contain latex
Caution, consult accompanying
documents
Date of manufacture
Use by XXX (XXX = expiration date)

9
Datex-Ohmeda S/5 Monitors

412681-005 Multi-Link 5-Leadwire Set , Grouped,

Grabber, AHA, Mixed Length - RL, LL, V:
ECG accessories 130 cm/51 in, RA, LA: 74 cm/29 in, 5/set
412681-006 Multi-Link 5-Leadwire Set, Grouped,
Multi-Link 3-lead ECG Trunk Cables Grabber, IEC, Mixed Length - N, F, C: 130
cm/ 51 in, R,L: 74 cm/29 in, 5/set
412944-001 Multi-Link 3-lead ECG Trunk Cable, DIN, 412682-001 Multi-Link 3-Leadwire Set, Grouped,
AAMI/AHA, 3.6 m/12 ft Grabber, AHA, 74 cm/29 in, 3/set
412944-002 Multi-Link 3-lead ECG Trunk Cable, DIN, 412682-002 Multi-Link 3-Leadwire Set, Grouped,
IEC, 3.6 m/12 ft Grabber, AHA, 130 cm/51 in, 3/set
412682-003 Multi-Link 3-Leadwire Set, Grouped,
Multi-Link 3-Lead Integrated Cable and Leadwire Grabber, IEC, 74 cm/29 in, 3/set
Systems 412682-004 Multi-Link 3-Leadwire Set, Grouped,
2001292-001 Multi-Link 3-Lead ECG Cable with Grabber, IEC, 130 cm/51 in, 3/set
Integrated Grabber Leadwires, AHA, Multi-Link ECG Leadwire Sets - Individually
3.6 m/12 ft Replaced - Grabber
2001292-002 Multi-Link 3-Lead ECG Cable with
Integrated Grabber Leadwires, IEC, 414556-001 Multi-Link 5-Leadwire Set, Grabber,
3.6 m/12 ft AAMI/AHA, 74 cm/29 in, 5/set
414556-002 Multi-Link 5-Leadwire Set, Grabber,
AAMI/AHA, 130 cm/51 in, 5/set
Multi-Link 5-Lead Standard ECG Trunk Cables
414556-003 Multi-Link 5-Leadwire Set, Grabber, IEC,
412931-001 Multi-Link 5-lead Standard ECG Cable, 74 cm/29 in, 5/set
AHA, 3.6 m/12 ft 414556-004 Multi-Link 5-Leadwire Set, Grabber, IEC,
412931-002 Multi-Link 5-lead Standard ECG Cable, IEC, 130 cm/51 in, 5/set
3.6 m/12 ft 414556-005 Multi-Link 5-Leadwire Set, Grouped,
412931-021 Multi-Link 5-lead Standard ECG Cable, Grabber, AAMI/AHA, Mixed Length - RL, LL,
AHA, 6 m/20 ft V: 130 cm/51 in, RA, LA: 74 cm/29 in,
412931-022 Multi-Link 5-lead Standard ECG Cable, IEC, 5/set
6 m/20 ft 414556-006 Multi-Link 5-Leadwire Set, Grouped,
Grabber, IEC, Mixed Length - N, F, C: 130
Multi-Link 12-Lead Standard ECG Trunk Cables cm/51 in, R, L: 74 cm/29 in, 5/set
416035-001 Multi-Link 12-lead Standard ECG Cable, 416467-001 Multi-Link 5-Leadwire Set, Grabber,
AHA, 3.6 m/12 ft AAMI/AHA, V2-V6, 130 cm/51 in, 5/set
416035-002 Multi-Link 12-lead Standard ECG Cable, 416467-003 Multi-Link 5-Leadwire Set, Grabber,
IEC, 3.6 m/12 ft AAMI/AHA, V2-V6, 74 cm/29 in, 5/set
416035-100 Multi-Link V-lead Dust Cap for 12-Lead 416467-002 Multi-Link 5-Leadwire Set, Grabber, IEC,
ECG Cable C2-C6, 130 cm/51 in, 5/set
416467-004 Multi-Link 5-Leadwire Set, Grabber, IEC,
Multi-Link ECG Cable Adapters C2-C6, 74 cm/29 in, 5/set
414370-001 Multi-Link 5-Lead DIN Adapter Multi-Link ECG Leadwires - Individually Replaced -
To convert 5-Lead trunk cable for use with Grabber
5-Lead DIN style radiotranslucent 412680-001 Multi-Link Leadwire, Grabber, Red, LL,
leadwires AAMI/AHA, 74 cm/29 in
414370-002 Multi-Link 3-Lead DIN Adapter 412680-002 Multi-Link Leadwire, Grabber, White, RA,
To convert 5-Lead trunk cable for use with AAMI/AHA, 74 cm/29 in
3-Lead DIN style radiotranslucent
412680-003 Multi-Link Leadwire, Grabber, Green, RL,
leadwires
AAMI/AHA, 74 cm/29 in
412680-004 Multi-Link Leadwire, Grabber, LA,
Multi-Link ECG Leadwire Sets - Grouped - Grabber AAMI/AHA, 74 cm/29 in
412681-001 Multi-Link 5-Leadwire Set, Grouped, 412680-005 Multi-Link Leadwire, Grabber, Brown, V1,
Grabber, AHA, 74 cm/29 in, 5/set AAMI/AHA, 74 cm/29 in
412681-002 Multi-Link 5-Leadwire Set, Grouped, 412680-101 Multi-Link Leadwire, Grabber, Red, LL,
Grabber, AHA, 130 cm/51 in, 5/set AAMI/AHA, 130 cm/51 in
412681-003 Multi-Link 5-Leadwire Set , Grouped, 412680-102 Multi-Link Leadwire, Grabber, White, RA,
Grabber, IEC, 74 cm/29 in, 5/set AAMI/AHA, 130 cm/51 in
412681-004 Multi-Link 5-Leadwire Set, Grouped, 412680-103 Multi-Link Leadwire, Grabber, Green, RL,
Grabber, IEC, 130 cm/51 in, 5/set AAMI/AHA, 130 cm/51 in

10
 Supplies and Accessories

412680-104 Multi-Link Leadwire, Grabber, Black, LA, Multi-Link ECG Leadwire Sets - Grouped - Snap
AAMI/AHA, 130 cm/51 in 411202-001 Multi-Link 5-Leadwire Set, Grouped, Snap,
412680-105 Multi-Link Leadwire, Grabber, Brown, V1, AAMI/AHA, 74 cm/29 in, 5/set
AAMI/AHA, 130 cm/51 in 411202-002 Multi-Link 5-Leadwire Set, Grouped, Snap,
416447-011 Multi-Link Leadwire, Grabber, Brown, V2, AAMI/AHA, 130 cm/51 in, 5/set
AAMI/AHA, 130 cm/51 in 411202-003 Multi-Link 5-Leadwire Set , Grouped, Snap,
416447-012 Multi-Link Leadwire, Grabber, Brown, V3, IEC, 74 cm/29 in, 5/set
AAMI/AHA, 130 cm/51 in 411202-004 Multi-Link 5-Leadwire Set, Grouped, Snap,
416447-013 Multi-Link Leadwire, Grabber, Brown, V4, IEC, 130 cm/51 in, 5/set
AAMI/AHA, 130 cm/51 in 411202-005 Multi-Link 5-Leadwire Set, Grouped, Snap,
416447-014 Multi-Link Leadwire, Grabber, Brown, V5, AAMI/AHA, Mixed Length - RL,LL,V:
AAMI/AHA, 130 cm/51 in 130 cm/ 51 in, RA,LA: 74 cm/29 in, 5/set
416447-015 Multi-Link Leadwire, Grabber, Brown, V6, 411202-006 Multi-Link 5-Leadwire Set, Grouped, Snap,
AAMI/AHA, 130 cm/51 in IEC, Mixed Length - RL, LL, V: 130 cm/ 51
Multi-Link ECG Leadwire Sets - Individually in, RA,LA: 74 cm/29 in, 5/set
Replaced - Snap 411203-001 Multi-Link 3-Leadwire Set, Grouped, Snap,
AAMI/AHA, 74 cm/29 in, 3/set
411200-001 Multi-Link 5-Leadwire Set, Snap,
411203-002 Multi-Link 3-Leadwire Set, Grouped, Snap,
AAMI/AHA, 74 cm/29 in, 5/set
AAMI/AHA, 130 cm/51 in, 3/set
411200-002 Multi-Link 5-Leadwire Set, Snap,
411203-003 Multi-Link 3-Leadwire Set, Grouped, Snap,
AAMI/AHA, 130 cm/51 in, 5/set
IEC, 74 cm/29 in, 3/set
411200-003 Multi-Link 5-Leadwire Set, Snap, IEC,
411203-004 Multi-Link 3-Leadwire Set, Grouped, Snap,
74 cm/29 in, 5/set
IEC, 130 cm/51 in, 3/set
411200-004 Multi-Link 5-Leadwire Set, Snap, IEC,
130 cm/51 in, 5/set Multi-Link ECG Leadwire Sets - Individually
411200-005 Multi-Link 5-Leadwire Set, Snap, Replaced - Universal/Banana Plug
AAMI/AHA, Mixed Length - RL, LL, V:130 417949-001 Multi-Link Leadwire Set, Universal/Banana
cm/51 in, RA, LA: 74 cm/29 in, 5/set Plug, AAMI/AHA, 74 cm/29 in, 5/set
416468-001 Multi-Link 5-Leadwire Set, Snap, V2-V6, 417483-201 Multi-Link Leadwire Set, Universal/Banana
AAMI/AHA, 130 cm/51 in, 5/set Plug, AAMI/AHA, V2-V6, 130 cm/51 in,
416468-002 Multi-Link 5-Leadwire Set, Snap, C2-C6, 5/set
IEC, 130 cm/51 in, 5/set 417483-401 Multi-Link Leadwire Set, Universal/Banana
416468-003 Multi-Link 5-Leadwire Set, Snap, V2-V6, Plug, AAMI/AHA, V2-V6, 74 cm/29 in,
AAMI/AHA, 74 cm/29 in, 5/set 5/set
416468-004 Multi-Link 5-Leadwire Set, Snap, C2-C6,
IEC, 74 cm/29 in, 5/set Multi-Link ECG Leadwire Sets - Radiotranslucent
403751-019 Multi-Link Leadwire Set, Radiotranslucent/
Multi-Link ECG Leadwires - Individually Replaced -
Multi-Link/Grabber, AAMI/AHA,
Snap 122 cm/48 in, 5/set
412596-001 Multi-Link Leadwire, Snap, AAMI/AHA, LL, 403751-020 Multi-Link Leadwire Set, Radiotranslucent/
74 cm/29 in Multi-Link/Grabber, AAMI/AHA,
412596-002 Multi-Link Leadwire, Snap, AAMI/AHA, RA, 122 cm/48 in, 10/set
74 cm/29 in 403751-023 Multi-Link Leadwire Set, Radiotranslucent/
412596-003 Multi-Link Leadwire, Snap, AAMI/AHA, RL, Multi-Link/Grabber, AAMI/AHA,
74 cm/29 in 152 cm/60 in, 5/set
412596-004 Multi-Link Leadwire, Snap, AAMI/AHA, LA, 403751-024 Multi-Link Leadwire Set, Radiotranslucent/
74 cm/29 in Multi-Link/Grabber, AAMI/AHA,
412596-005 Multi-Link Leadwire, Snap, AAMI/AHA, V1, 152 cm/60 in, 10/set
74 cm/29 in 403751-033 Multi-Link Leadwire Set, Radiotranslucent/
412596-101 Multi-Link Leadwire, Snap, AAMI/AHA, LL, Multi-Link/Grabber, IEC, 152 cm/60 in,
130 cm/51 in C2-C6, 5/set
412596-102 Multi-Link Leadwire, Snap, AAMI/AHA, RA, 403751-101 Multi-Link Leadwire Set, Radiotranslucent/
130 cm/51 in Multi-Link/ Grabber, Gray Generic
412596-103 Multi-Link Leadwire, Snap, AAMI/AHA, RL, Connectors, 122 cm/48 in, 5/set
130 cm/51 in
412596-104 Multi-Link Leadwire, Snap, AAMI/AHA, LA, Multi-Link ECG Leadwire Sets - Radiotranslucent -
130 cm/51 in Grabber/ DIN Connectors - Sets
412596-105 Multi-Link Leadwire, Snap, AAMI/AHA, V1, 403751-007 Leadwire Set, Radiotranslucent,
130 cm/51 in Grabber/DIN, AAMI/AHA, 122 cm/48 in,
5/set

11
Datex-Ohmeda S/5 Monitors

403751-009 Leadwire Set, Radiotranslucent,

Grabber/DIN, AAMI/AHA, 152 cm/60 in, Leadwire sets, AAMI color coding
5/set
545317 3 Leadwire Set, clip, 0.75 m/2.5 ft
403751-014 Leadwire Set, Radiotranslucent,
545318 5 Leadwire Set, clip, 1.25 m/4.1 ft
Grabber/DIN, IEC, 122 cm/48 in, 5/set
545327 3 Leadwire Set, snap, 0.75 m/2.5 ft
403751-015 Leadwire Set, Radiotranslucent,
545328 5 Leadwire Set, snap, 1.25 m/4.1 ft
Grabber/DIN, AAMI/AHA, limb leads,
8001958 3 Leadwire Set, clip, 1.5 m/4.9 ft
5/set
8001959 5 Leadwire Set, clip, 1.5 m/4.9 ft
Multi-Link ECG Leadwire Sets - Radiotranslucent -
Grabber/DIN Connectors - Individually Replaced Replacement Leads: IEC
403751-006 Leadwire Set, Radiotranslucent, 545340 Clip Lead R, 0.75 m/2.5 ft
Grabber/DIN, AAMI/AHA, 122 cm/48 in 545341 Clip Lead F, 0.75 m/2.5 ft
403751-008 Leadwire Set, Radiotranslucent, 545342 Clip Lead L, 0.75 m/2.5 ft
Grabber/DIN, AAMI/AHA, 152 cm/60 in 545343 Clip Lead C, 0.75 m/2.5 ft
Multi-Link Cable and Leadwire Management 545347 Clip Lead F, 1.25 m/4.1 ft
Accessories 545348 Clip Lead N, 1.25 m/4.1 ft
411195-004 Multi-Link Combiner, 5-lead, Limb Lead,
3/pack Replacement Leads: AAMI/AHA
414763-002 Multi-Link Leadwire Separator, 3-lead, 545344 Clip Lead LA, 0.75 m/2.5 ft
Limb Lead 545345 Clip Lead V, 0.75 m/2.5 ft
416212-001 Multi-Link Bedsheet Clip 545358 Clip Lead LL, 0.75 m/2.5 ft
401498-004 ECG Cable Clips, 50/pack 545359 Clip Lead RA, 0.75 m/2.5 ft
545346 Clip Lead LL, 1.25 m/4.1 ft
Compatibility ECG Trunk Cables 545349 Clip Lead RL, 1.25 m/4.1 ft
545350 Snap Lead LL, 0.75 m/2.5 ft
- for using 300 series leadwire sets below
545351 Snap Lead LA, 0.75 m/2.5 ft
M1020453 Compatibility ECG Trunk Cable, 3-lead,
545352 Snap Lead RA, 0.75 m/2.5 ft
from Multi-Link connector to 300 Series
545353 Snap Lead V, 0.75 m/2.5 ft
Leadset, IEC, 3.0 m/10 ft
545354 Snap Lead LL, 1.25 m/4.1 ft
M1020454 Compatibility ECG Trunk Cable, 3-lead,
545355 Snap Lead RL, 1.25 m/4.1 ft
from Multi-Link connector to 300 Series
8003274 Clip Lead LL, 1.5 m/4.9 ft
Leadset, AHA, 3.0 m/10 ft
8003275 Clip Lead V, 1.5 m/4.9 ft
M1020541 Compatibility ECG Trunk Cable, 5-lead,
8003276 Clip Lead RL, 1.5 m/4.9 ft
from Multi-Link connector to 300 Series
Leadset, IEC, 3.0 m/10 ft
M1020546 Compatibility ECG Trunk Cable, 5-lead, NIBP accessories
from Multi-Link connector to 300 Series
Leadset, AHA, 3.0 m/10 ft NOTE: The NIBP measurement is intended for patients who
weigh 5 kg (11 lb) and up.
NOTE: The NIBP cuffs listed below are latex-free.
300 Series Leadwire Sets
- when using Compatibility ECG Trunk Cables above 2021285-001 Adult NIBP cuff hose with cuff
identification, black, 3.6 m/12 ft
Leadwire sets, IEC color coding 414874-001 Infant/Neonatal NIBP cuff hose, without
545315 3 Leadwire Set, clip, 0.75 m/2.5 ft cuff identification, light blue
545316 5 Leadwire Set, clip, 1.25 m/4.1 ft 330085 Cuff adapter from male/male to
8001960 3 Leadwire Set, clip, 1.5 m/4.9 ft male/female
8001961 5 Leadwire Set, clip, 1.5 m/4.9 ft 8001997 Thigh NIBP cuff, 44 - 57 cm /
17.3 – 22.4 in

12
 Supplies and Accessories

Reusable Dura-Cufs Disposable cuffs

NOTE: Dura-Cufs are reusable and interchangeable with the 8001991 Long large adult cuff, pkg of 10 pcs
reusable color coded cuffs of the same size listed below. 8001992 Large adult cuff, pkg of 10 pcs
2751 Dura-Cuf, Child, Green, 12 - 19 cm / 8002562 Long standard adult cuff, pkg of 10 pcs
4.7 – 7.4 in, pkg of 5 pcs 8001993 Standard adult cuff, pkg of 10 pcs
2752 Dura-Cuf, Small Adult, Royal Blue, 17 - 25 cm 8001994 Small adult cuff, pkg of 10 pcs
/ 6.7 – 9.8 in, pkg of 5 pcs 8001995 Child cuff, pkg of 10 pcs
2753 Dura-Cuf, Adult, Navy, 23 - 33 cm / 9 – 13 in, 572403 Infant cuff #3, pkg of 10 pcs
pkg of 5 pcs 572404 Infant cuff #4, pkg of 10 pcs
002756 Dura-Cuf, Adult Long, Navy, 23 - 33 cm / 572405 Infant cuff #5, pkg of 10 pcs
9 – 13 in, pkg of 5 pcs
2754 Dura-Cuf, Large Adult, Wine, 31 - 40 cm /
12.2 – 15.7 in, pkg of 5 pcs Pulse oximetry accessories
002757 Dura-Cuf, Large Adult Long, Wine, 31 - 40 cm OXY-ES3 OxyTip+ Interconnect Cable
/ 12.2 – 15.7 in, pkg of 5 pcs
2755 Dura-Cuf, Thigh, Brown, 38 - 50 cm /
15 – 19.7 in, pkg of 5 pcs OxyTip+ Reusable SpO2 Sensors
2751E Dura-Cuf, Child, Green, 12 - 19 cm / OXY-E-UN OxyTip+ Interconnect Ear Sensor with
4.7 – 7.5 in, pkg of 1 pcs Universal connector
2752E Dura-Cuf, Small Adult, Royal Blue, 17 - 25 cm OXY-SE-3 OxyTip+ Sensitive Skin Sensor
/ 6.7 – 9.8 in, pkg of 1 pcs OXY-F-UN OxyTip+ Interconnect Finger Sensor with
2753E Dura-Cuf, Adult, Navy, 23 - 33 cm / Universal connector
9 – 13 in, pkg of 1 pcs OXY-W-UN OxyTip+ Interconnect Wrap sensor with
002756E Dura-Cuf, Adult Long, Navy, 23 - 33 cm / Universal connector
9 – 13 in, pkg of 1 pcs
2754E Dura-Cuf, Large Adult, Wine, 31 - 40 cm, /
12.2 – 15.7 in, pkg of 1 pcs OxyTip+ Adhesive Sensors
002757E Dura-Cuf, Large Adult Long, Wine, 31 - 40 cm OXY-AP OxyTip+ Adult/Pediatric Adhesive Sensor
/ 12.2 – 15.7 in, pkg of 1 pcs (10/package, 25/package)
2755E Dura-Cuf, Thigh, Brown, 38 - 50 cm / OXY-AF OxyTip+ AllFit Adhesive Sensor (10/package)
15 – 19.7 in, pkg of 1 pcs

Reusable color coded latex-free cuffs Temperature accessories

572429 Large adult cuff, red 402015-004 Dual temperature cable, 20 cm / 8 in,
572428 Standard adult cuff, blue accepts YSI 400 series probes
572427 Small adult cuff, gray 2022009-001 Single temperature adapter cable, 20 cm /
572426 Child cuff, green 8 in, accepts YSI 400 series probes
572425 Infant cuff, tan 165640 Extension cable for disposable temperature
8002248 Long large adult cuff, red probes, 1.3 m/4.3 ft
8001997 Thigh NIBP cuff 165641 Extension cable for disposable temperature
probes, 2.83 m/9 ft
Disposable Soft-Cufs
NOTE: Soft-Cufs are disposable and interchangeable with Reusable probes
the disposable cuffs of the same size listed below.
16560 Skin temp probe, 3.5 m/11.5 ft
2451 Soft-Cuf, Child, Green/White, 12 -19 cm /
165602 Skin temp probe, 1.5 m/4.9ft
4.7 – 7.5 in, pkg of 20 pcs
16561 Central temp probe, adult, 2.8 m/9 ft
2452 Soft-Cuf, Small Adult, Lt. Blue/White, 17 - 25 cm
165622 Central temp probe, adult, 1.5 m/4.9 ft
/ 6.7 – 9.8 in, pkg of 20 pcs
165611 Central temp probe, pedi,
2453 Soft-Cuf, Adult, Navy/White, 23 - 33 cm /
2.8 m/9 ft
9 – 13 in, pkg of 20 pcs
165612 Central temp probe, pedi,
2454 Soft-Cuf, Adult Long, Navy/White, 23 - 33 cm /
1.5 m/4.9 ft
9 – 13 in, pkg of 20 pcs
2455 Soft-Cuf, Large Adult, Rose/White, 31 - 40 cm,
pkg of 20 pcs Disposable probes
2456 Soft-Cuf, Large Adult Long, Rose/White,
8001642 Skin temperature probe, pkg of 25
31 - 40 cm / / 12.2 – 15.7 in, pkg of 20 pcs
8001643 Central temperature probe 12F, pkg of 25 pcs
2457 Soft-Cuf, Thigh, Brown/White, 38 - 50 cm / 15 8001644 Central temperature probe 9F, pkg of 25 pcs
– 19.7 in, pkg of 20 pcs

13
Datex-Ohmeda S/5 Monitors

Esophageal stethoscopes 733162 CO2 Sampling line, 2 m/7 ft, M/M luer, 10 pcs
733163 CO2 Sampling line, 3 m/10 ft, M/M luer, 10 pcs
8002910 Esophageal stethoscope with temperature
probe, 9F
8002911 Esophageal stethoscope with temperature
Calibration accessories
probe, 12F 755532 Adapter for calibration regulator
8002908 Esophageal stethoscope with temperature 755534 D-gate calibration gas regulator
probe, 18F 755580 Quick Cal calibration gas, pkg of 4 pcs
8002909 Esophageal stethoscope with temperature 755583 Calibration gas, CO2, O2, N2O, DESF, 1 can
probe, 24F
Low dead space adapters
Invasive pressure accessories 8001540 For ET tubes with ID 2.5 mm, pkg of 10 pcs
2005772-001 Dual invasive blood pressure adapter cable 8001541 For ET tubes with ID 3.0 mm, pkg of 10 pcs
700078-001 Utah transducer adapter cable 8001542 For ET tubes with ID 3.5 mm, pkg of 10 pcs
700077-001 Becton & Dickinson transducer adapter cable 8001543 Pediatric adapter, 4.0 mm, pkg of 10 pcs
8000062 For ET tubes with ID 4.5 mm, pkg of 10 pcs
8000063 For ET tubes with ID 5.0 mm, pkg of 10 pcs
Hemodynamic accessory kits
M1022220 Basic accessory kit for new S/5 modules, Miscellaneous
IEC
M1022222 Basic accessory kit for new S/5 modules, M1026708 Adapter for Gas Return, 22 mm M/22 mm F
AAMI/AHA M1026709 Exhaust Line for Gas Return or Scavenging
M1022225 Advanced accessory kit for new S/5
modules, IEC Spirometry accessories
M1022227 Advanced accessory kit for new S/5
modules with ECG snaps, AAMI/AHA 879966 Spirometry Demo Set Up
M1023471 Advanced accessory kit for new S/5 884202 Spirometry tester
modules with ECG grabbers, AAMI/AHA
Spirometry accessory kits
Airway gas accessories 889560 Spirometry Accessory Kit, 50 pcs
894255 Spirometry kit patient spirometry kit for ICU
8002174 Mini D-fend, pkg of 10 pcs
8002718 Pediatric Spirometry Kit, pkg of 50 pcs
876107 D-fend water trap container, 5 pcs
8004381 Spirometry Kit for humid conditions,
2 m/7 ft, 20 pcs
Disposable airway adapters 8004382 Spirometry Kit for humid conditions,
73385 Straight T-adapter, pkg of 10 pcs 3 m/10 ft, 20 pcs
73386 Elbow adapter, pkg of 10 pcs
733856 Straight T-adapter, pkg of 100 pcs Sensors
733866 Elbow adapter, pkg of 100 pcs
733950 D-lite sensor, disposable, 50 pcs
896952 D-lite+ sensor, pkg of 50 pcs
Anesthesia gas sampling lines 8001948 Pedi lite+ spirometry sensor, disposable,
humid conditions, pkg of 50 pcs
73318 Disposable, 2 m/7 ft, pkg of 10 pcs
73393 Pedi-lite sensor, reusable
73319 Disposable, 3 m/10 ft, pkg of 10 pcs
733910 D-lite sensor, reusable, transparent yellow
733188 Disposable, 2 m/7 ft, pkg of 100 pcs
733199 Disposable, 3 m/10 ft, pkg of 100 pcs
73306 Disposable, 6 m/19.7 ft, pkg of 5 pcs Tubes
733170 Sampling line, 3 m/10 ft, male/male elbow, 884101 Spirometry tube, 3 m/10 ft, yellow, 5 pcs
10 pcs 884105 Spirometry tube, 3 m/10 ft, green, 5 pcs
8004383 Anesthesia gas sampling line 3 m/10 ft, elbow 890031 Spirometry tube, 2 m/7 ft, yellow, 5 pcs
connector, 10 pcs 891191 Spirometry tube, 6 m/20 ft, yellow, 5 pcs

Sampling lines
878033 Nasal sampling line, pediatric, pkg of 10 pcs
878034 Nasal sampling line, adult, pkg of 10 pcs
878035 Nasal sampling line, large adult, pkg of 10 pcs

14
 Supplies and Accessories

Cardiac Output accessories EEG electrodes and paste

16573 Thermodilution catheter 93A-131H-7F 75349 EEG paste for electrodes, electrode cream,
16574 C.O.-set for room temperature injectate, 10 pcs water soluble, 100 g tube
16590 C.O. catheter connecting cable 572685 Electrode-set, low-impedance electrodes,
16591 Injectate bath temperature probe 15 pouches of 5 pcs
16592 Flow-through injectate temperature probe 572686 Electrode-set, cup electrodes, Ag/Agcl,
16593 Spectramed C.O. set temperature probe 500pcs/box

SvO2 accessories EEG individual leads

898038 Individual EEG lead black ground clip
165790 SvO2 Optical Module 898039 Individual EEG lead black ground cup
898150 Individual EEG lead empty
Cables
8002733 InvBP Interface Cable, Baxter Transducers EEG individual leads, bipolar
8002734 InvBP Interface Cable, Becton-Dickinson 898040 Individual EEG lead red clip, bip.
Transducer 898041 Individual EEG lead red cup, bip.
8002735 InvBP Interface Cable, Abbott Transducers 898042 Individual EEG lead blue clip, bip.
8002736 InvBP Interface Cable, Utah Transducers 898043 Individual EEG lead blue cup, bip.
54586 Adapter cable, Spectramed DTX transducer 898045 Individual EEG lead yellow cup, bip.
875408 Adapter cable, HP1290C InvBP transducer 898046 Individual EEG lead green cup, bip.
M1002425 Interface Cable for Datex/S-W 898144 Individual EEG lead blue clip, bip.
898147 Individual EEG lead green clip, bip.
Flusing sets and kits, pressure kit
16571 Flushing set for InvBP catheter, 5 pcs EEG individual leads, referential
16577 Flushing kit for 16576, 10 pcs 898044 Individual EEG lead blue clip, ref.
78001 Flushing kit for SensoNor 844 transducer, 898143 Individual EEG lead blue cup, ref.
10 pcs 898145 Individual EEG lead yellow clip, ref.
M1002427 Biotrans Single Pressure Kit, sterile. 898146 Individual EEG lead yellow cup, ref.
W. CE mark 898148 Individual EEG lead green clip, ref.
898149 Individual EEG lead green cup, ref.
Domes
16578 Dome for InvBP transd. 16576, 50 pcs EEG lead sets
78002 Dome for SensoNor 844 InvBP transducer, 898050 2 Channel bipolar leadset (basic/clip)
50 pcs 898051 4 Channel bipolar leadset (general/cup)
898052 AEP leadset (clip)
Transducers 898151 Empty EEG leadset 4
898152 Empty EEG leadset 5
78000 InvBP transducer, SensoNor 844,
898153 Empty EEG leadset 6
50uV/V/cmHg
898154 Empty EEG leadset 7
165700 InvBP transducer,P10EZ, 50uV/V/cmHg
898155 Empty EEG leadset 8

Miscellaneous EEG simulator cables

16579 Holder for REF 78000 InvBP Transducer
78026 Simulator-cable, AEP cable, 90 cm/3 ft,
M1002423 Biotrans Base Plate
100ohm resistor
78027 Simulator-cable, SEP cable, 90 cm/3 ft,
EEG accessories Signal+/-200V and 200mA
78029 Simulator-cable, Power/Data cable for EEG
Simulator, 90 cm/3 ft
Evoked potential accessories 8001485 EEG cable for EEG-simulator
8001000 Earphone, EEG accessory
8001233 Ear tips for AEP earphone set, pkg of 20 pcs Miscellaneous
8001234 Ear tip for individual earphone, pkg of 10 pcs 8002167 Universal power adapter, 90-264 VAC, 5VDC
8001484 EEG simulator set

15
Datex-Ohmeda S/5 Monitors

NMT accessories
Mounting elements
NMT sensors
888416 E-NMT ElectroSensor
Holders for Remote controller and
888418 E-NMT MechanoSensor Command bars
897439 Pediatric MechanoSensor 8000065 Remote control holder (K-REMCO & K-CREMCO)
8001952 Command bar frame holder (K-ANEB & K-ICUB)
NMT cables 8001953 Command bar table holder (K-ANEB & K-ICUB)
888414 E-NMT Sensor Cable, 3 m/10 ft
888415 E-NMT Sensor Cable, 1 m/3 ft Mounts for Modular Monitor displays
M1001527 LCD Display Ceiling Mount (D-LCC12A, D-LCC17
Miscellaneous and D-LCC19)
M1001542 LCD Display Pivot Wall Mount (D-LCC12A,
57268 NMT electrodes, Ag/AgCl, 30 pcs
D-LCC15, D-LCC17 and D-LCC19)
888417 E-NMT Regional Block Adapter
M1001552 LCD Display Wall Mount (D-LCC12A, D-LCC15,
8002717 NMT Start-up Kit
D-LCC17 and D-LCC19)
M1001703 LCD Display Pedestal Mount (D-LCC12A,
Tonometry accessories D-LCC15, D-LCC17 and D-LCC19)
M1001704 LCD Display Flush Wall Mount (D-LCC12A,
755580 Calibration gas, CO2, bal Air, 4 pcs D-LCC15, D-LCC17 and D-LCC19)
733251 Calibration gas sampling line for M1030852 Plasma Display Wall Mount (D-MMP42)
tonometry, 35 cm/14 in
TONO-14F Tonometry catheter, 14F with biofilter,
pkg of 5 pcs Mounts for Modular Monitoring frames
TONO-16F Tonometry catheter, 16F with biofilter, M1027908 Holder for S/5 Command bar K-ANEB or
pkg of 5 pcs S/5 Command bar K-ICUB
TONO-18F Tonometry catheter, 18F with biofilter, M1027909 Wall Mount Hanger for S/5 F-CU5
pkg of 5 pcs M1027910 Table Holder for S/5 F-CU5
TONO-8F Tonometry catheter, 8F with biofilter, M1027911 Adapter Plate for S/5 F-CU5
pkg of 5 pcs M1035232 Power Adapter Mount for F-CU5 Power Unit
N-AC
Entropy accessories M1001702
881885
Hanger for S/5 Monitor Frame
Vertical Mount for Central Unit
8002858 Entropy sensor for adult use, pkg of 25 pcs 880446 Airway module mount
8002964 Ent-3 Entropy Sensor Interface Cable 882342 Extension frame mounting plate
3 m/10 ft
8005351 Entropy Sensor Start-up Kit Mounts for Portable monitors
572238 Portable monitor wall mount 15”, pivoting
BIS accessories arm
545780 PIC+ cable 8000725 Portable monitor wall mount 12", fixed arm
545781 BIS sensor plus, box of 25 pcs 8000726 Portable monitor counter top mount
545782 BIS sensor pediatric, box of 25 pcs 572235 Portable monitors roll stand
545783 BIS sensor xp, box of 25 pcs 887053 Compact monitor universal mounting plate
900510 Converter, set of DSC-XP with PIC+ Cable 886172 Compact monitor bed mount
8005322 Aspect demo device flex circuit plus
Other mounts
8001460 Small device mount
892776 Universal accessory bracket
57225 Accessory bracket

16
 Supplies and Accessories

888525 Display Controller – LCD cable,

LCD Display Interface Cable, 2.5 m/8 ft
Simulators 888643 Display Controller – LCD cable,
M1010831 Hemodynamic simulator LCD Display Interface Cable, 10 m/33 ft
892873 Display Controller – CD cable,
LCD Display Interface Cable, 1 m/3 ft
Adapter cables for for simulators 882404 UPI – ECG Synchronization Output Box
M1010832 Adapter cable for temperature simulator 882435 UPI Input – Output Connector Extender
(Fluke Biomedical MedSim) 891009 UPI Input – Output Y-cable
M1010858 Adapter cable for invasive blood pressure 882989 M-PT – Datascope IABP Cable, 6 m/20 ft
simulator (Fluke Biomedical MedSim) 884988 M-PT – Kontron IABP Cable, 6 m/20 ft
M1010846 Adapter cable for temperature simulator 889352 M-PT Universal ECG/P3 Output Cable,
(Fluke Biomedical Lionheart & MPS450) 6 m/20 ft
M1010862 Adapter cable for invasive blood pressure 886826 ADU – AS/3 Monitor Cable, 120 cm/4 ft
simulator (Fluke Biomedical Lionheart & 891965 Remote Controller – Compact Monitor
MPS450) Cable, 6 m/20 ft
871251 NMT simulator 8002083 Datex-Ohmeda S/5 K-ANEB/K-ICUB
N-ES Entropy simulator Cable, 5 m/16 ft
8001484 EEG simulator 8001117 Datex-Ohmeda S/5 ARK Keyboard –
Monitor Cable, 2 m/6 ft
881154 Datex-Ohmeda S/5 ARK Keyboard – LCD
Device Interfacing Solution Cable, 1.5 m/5 ft
8001460 Small device mount 889340 Datex-Ohmeda S/5 ARK Keyboard – LCD
8001461 Small IV pole mount Cable, 2.5 m/8 ft
8001433 BUS extension cable 8001433 Bus Extension cable for Device Interfacing
900501 Cable, 1 m/3 ft Solutions, 2 m/6 ft
900502 Cable, 2 m/7 ft 78030 CM1 Serial to Parallel Converter.
900503 Cable, 6 m/20 ft 78031 CM1 – Converter Interface Cable, Modem
Cable, 1.8 m/6 ft, connectors: D9F and D25
78032 Converter – Printer Cable, connectors:
Interfacing Cables D25F/D25F

Interface cables for modular system F-CU5 cables

monitors
M1021340 F-CPU Power cable 0.4m, power cable for F-CU5
884297 B-GAS Interface Cable, 20 cm/8 in M1021341 F-CPU Power cable 2.7m, power cable for F-CU5
884298 B-GAS Interface Cable, 70 cm/28 in M1021337 F-CPU Signal cable 0.3m, signal cable for F-CU5
884299 B-GAS Interface Cable, 2.5 m/8 ft M1021338 F-CPU Signal cable 3.0m, signal cable for F-CU5
545581 Datex-Ohmeda Display Power Cord, for M1021339 F-CPU Signal cable 10.0m, signal cable for F-CU5
D-VNC15 (EUR/USA)
887245 UPI – Datex-Ohmeda Monitor Cable, Interface cables for configured monitors
2 m/7 ft
890928 UPI – Printer Parallel Interface Cable, 887245 UPI – Datex-Ohmeda Monitor Cable, 2 m/7 ft
3 m/10 ft 874569 CC II/CC – Gas monitor cable:
713701 Datex-Ohmeda UPI4 – Printer Parallel Cardiocap II CH-models, Cardiocap models
Interface Cable, 3 m / 10 ft CM, CMO, CTO – Capnomac II, Capnomac,
892377 INT - External Device Cable 2 m/7 ft Multicap, Normocap 200
892380 INT – Nellcor Cable, 2 m/7 ft 883624 CC II/CC – Capnomac Ultima cable:
892385 INT – Baxter Vigilance Cable, 2 m/7 ft Cardiocap II CH models, Cardiocap models
894910 INT – Julian/Cicero Cable, 2 m/7 ft CM, CMO, CTO – Capnomac Ultima
882353 B-INT Interface Connector Cable 883857 Datex-Ohmeda monitor – PC cable:
881167 UPI – PC Serial Cable, 3 m/10 ft Datex-Ohmeda monitor – IBM compatible
882552 UPI – PC Data Collection Software, 3.5” computer, 9 pin connector for PC.
disc 883855 Datex-Ohmeda monitor – PC cable:
889314 Display Controller Y-Cable Datex-Ohmeda monitor – IBM compatible
889308 B-UPINET Y-Cable w/ECG Output computer, 25 pin connector for PC.
889311 B-UPINET – Datex-Ohmeda monitor cable 884011 ADU – Capnomac Ultima cable:
713695 Video Cable, 15 m/50 ft BNC connectors Datex-Ohmeda ADU – Capnomac Ultima Cable
892095 Video Cable, 10 m/33 ft, D15 883856 Whiteline monitor – printer cable, to
male/female connectors connect monitor to HP ThinkJet and EPSON

17
Datex-Ohmeda S/5 Monitors

78030 CM1 Serial to Parallel Converter

CC-SPC Printer cable, always needed with Canon
BJ85 and BJ 30 printer
894193 Light Monitor – Printer cable:
Light Monitor models F-LM1, F-LMP1,
Light Solo models F-SOLO, F-SOLOP,
Cardiocap 5
Other
M1008142 Battery for S/5 FM
M1020847 Multi I/O Adapter for S/5 FM with
connectors for serial port, network ID and
K-CREMCO
74205 Thermal recorder paper, 20 rolls
85969 Cleaning fluid
78030 Serial to parallel converter
78032 Gender changer (for parallel printers)

18