BLADDER ACCUMULATORS

Bladder Accumulators
The standard bladder accumulator consists of a “closed” rubber bladder
inside a forged steel shell. A mechanically actuated valve closes when the
fluid has been expelled, blocking off the fluid port, thereby enclosing the
bladder within the shell. Where high discharge rates are required, a high flow
model is available.

PN#02068195 / 4.21 / ACU1808-2025 B1

BLADDER ACCUMULATORS
SB Series Bladder Materials
Not all fluids are compatible with every elastomer at all temperatures.
Bladder Accumulators Therefore, HYDAC offers the following choice of elastomers:
• NBR (Standard Nitrile)
• LT-NBR (Low Temperature Nitrile)
• ELT-NBR (Extra Low Temperature Nitrile)
• ECO (Epichlorohydrin)
• IIR (Butyl)
• FPM (Fluoroelastomer)
• Others (available upon request)
To determine which material is appropriate...
ALWAYS REFER TO FLUID MANUFACTURER’S RECOMMENDATION

Corrosion Protection
For use with certain aggressive or corrosive fluids, or in a corrosive
environment, HYDAC offers protective coatings and corrosive
resistant materials (i.e. stainless steel) for the accumulator parts
that come in contact with the fluid, or are exposed to the hostile
environment.

Mounting Position
Description HYDAC bladder accumulators can be installed in any orientation
depending upon the application. When installing vertically or at an
Bladder accumulators are a very versatile and cost effective option
angle, the fluid port must be at the bottom. On certain applications
for numerous types of hydraulic systems involving energy storage,
listed below, specific positions are preferable:
shock absorption, pulsation dampening, leakage loss compensation
and volume compensation. They are a first choice for a great variety • Energy Storage:
of general applications and have the widest range of standard sizes vertical
and model options. Bladder accumulators also have very quick • Pulsation Dampening:
shock response characteristics in sizes much larger than diaphragm any position from vertical to horizontal
accumulators. • Maintaining Constant Pressure:
any position from vertical to horizontal
• Volume Compensation:
Construction any position from vertical to horizontal
HYDAC bladder accumulators consist of a welded or forged pressure Caution: Mounting a HYDAC bladder accumulator horizontally or at
vessel (shell), a bladder and ports for gas and fluid inlet.
an angle will decrease the amount of usable volume available.
The gas and fluid sides are separated by the bladder.

System Mounting
Valve Seal Cap
HYDAC bladder accumulators are designed to be screwed directly
Gas Valve Core Valve Protection Cap onto the system. We also recommend the use of our mounting
Lock Nut O-Ring components, which are detailed on page H25, to minimize risk of
Name Plate failure due to system vibrations.

Shell Applications
Some common applications of bladder accumulators are:
• Agricultural Machinery & Equipment
• Forestry Equipment
Bladder • Oil Field & Offshore
• Machine Tools
Gas
• Mining Machinery & Equipment
• Mobile & Construction Equipment
• Off-Road Equipment
For specific examples of applications using bladder accumulators,
please see pages I2 and I3.

Fluid Poppet

Anti-extrusion Ring Seal Rings

Spacer Ring
Lock Nut Fluid Port
Seal Ring
Vent Screw

B2 PN#02068195 / 4.21 / ACU1808-2025

 BLADDER ACCUMULATORS
Model Code
SB 330 - 20 A 1 / 112 S – 210 C XXX
Series
SB 330 = Bladder accumulator (3000 psi, typically)
SB 600 = Bladder accumulator (5000 psi, typically)
Design
(omit) = Standard (bottom repairable)
N = Modified Flow (396 gpm)
H = High Flow (480 gpm)
TR = Standard (top repairable)
NTR = Modified Flow (396 gpm) (top repairable)
Size (in Liters, see dimension tables on following pages for most common sizes)
1 = 1 quart
4 = 1 gallon
6 = 1.5 gallons
10 = 2.5 gallons
20 = 5 gallons
32 = 10 gallons
42 = 11 gallons
54 = 15 gallons
Line Connection
A = Threaded
F = Flanged
Gas Port
1 = Standard model, HYDAC gas valve version 4 (8V1 - ISO 4570)
Material Code
Depending on Application
112 = Standard for oil service (mineral oil)
Fluid Port
0 = Synthetic coated carbon steel (PTFE solid film, internal & external for water service)
1 = Carbon steel
2 = High strength stainless steel (typically 17-4 PH)
3 = Stainless steel (corrosion resistance, (typically 316 ss)
4 = Chemically plated carbon steel (internal & external for water service)
6 = Low temperature carbon steel (<-40°F, min)
Shell
0 = Synthetic coated carbon steel (PTFE solid film, internal & external for water service)
1 = Carbon steel
2 = Chemically plated carbon steel (internal & external for water service)
6 = Low temperature carbon steel (<-40°F, min)
7 = Others available on request
(The maximum operating temperature of the standard accumulator design is 200°F; other options will be considered, upon request)
Bladder Compound
2 = NBR (Buna N) Compound Oper. Temp Range Typical Fluids
3 = ECO (Hydrin) NBR 5˚ to 180˚F mineral oils (standard)
32˚ to 180˚F water & water-glycols (5% minimum glycol)
4 = IIR (Butyl) LT-NBR -20˚ to 180˚F mineral oils (for low temperature)
5 = ELT-NBR (extra low temp. Buna) ELT-NBR -50˚ to 220˚F mineral oils (for extra low temperature)
6 = FPM (Fluoroelastomer) ECO -40˚ to 250˚F mineral oils
7 = Others (available on request) IIR -20˚ to 200˚F phosphate esters & brake fluids
FPM 5˚ to 300˚F chlorinated hydrocarbons
9 = LT-NBR (low temp. Buna)
Country of Installation
S = USA
S1 = Canada (CRN registered)
W1 = ABS Type Approval
W3 = DNV Type Approval
U = PED/CE
(for other countries see page 3 for proper code designation)
Maximum Allowable Working Pressure (MAWP) in bar
210 = 3000 psi
345 = 5000 psi
Fluid Port Connection
A = BSPP (ISO 228) Radial Seal Design NOT Axial
B = Metric (DIN 13)
Threaded C = SAE (ANSI B1.1)
D = NPT (ANSI B1.2)
E = SAE 2” - 3000 psi (Code 61)
Flanged F = SAE 1 1/2” - 6000 psi (Code 62)
G = SAE 1 1/4” - 3000 psi (Code 61) (only available in sizes 4 liters & 6 liters)
H = SAE 1” - 6000 psi (Code 62) (only available in sizes 1 liter & 4 liters)
Gas Precharge Pressure (Po) in bar
xxx = 3 digits

Model Codes containing RED selections are non-standard items – Contact HYDAC for information and availability. Not all combinations are available.

PN#02068195 / 12.23 / ACU1808-2025 B3

BLADDER ACCUMULATORS
Quad Certified Bladders
Model Code
SB 330 - 20 A 1 / 112 USFS1 – 330/262 C XXX
Series
SB 330 = Bladder accumulator
Design
(omit) = Standard (bottom repairable)
N = Modified Flow (396 gpm)
Size (in Liters, see dimension tables on following pages for most common sizes)
4 = 1 gallon
6 = 1.5 gallons
10 = 2.5 gallons
20 = 5 gallons
32 = 10 gallons
54 = 15 gallons
Line Connection
A = Threaded
F = Flanged
Gas Port
1 = Standard model, HYDAC gas valve version 4 (8V1 - ISO 4570)
Material Code
Depending on Application
112 = Standard for oil service (mineral oil)
Fluid Port
0 = Synthetic coated carbon steel (PTFE solid film, internal & external for water service)
1 = Carbon steel
2 = High strength stainless steel (typically 17-4 PH)
3 = Stainless steel (corrosion resistance, (typically 316 ss)
4 = Chemically plated carbon steel (internal & external for water service)
6 = Low temperature carbon steel (<-40°F, min)
Shell
0 = Synthetic coated carbon steel (PTFE solid film, internal & external for water service)
1 = Carbon steel
2 = Chemically plated carbon steel (internal & external for water service)
6 = Low temperature carbon steel (<-40°F, min)
7 = Others available on request
(The maximum operating temperature of the standard accumulator design is 200°F; other options considered, upon request)
Bladder Compound
2 = NBR (Buna N) Compound Oper. Temp Typical Fluids
3 = ECO (Hydrin) Range
NBR 5˚ to 180˚F mineral oils (standard)
4 = IIR (Butyl) 32˚ to 180˚F water & water-glycols (5% minimum glycol)
5 = ELT-NBR (extra low temp. Buna) LT-NBR -20˚ to 180˚F mineral oils (for low temperature)
6 = FPM (Fluoroelastomer) ELT-NBR -50˚ to 220˚F mineral oils (for extra low temperature)
7 = Others (available on request) ECO -40˚ to 250˚F mineral oils
IIR -20˚ to 200˚F phosphate esters & brake fluids
9 = LT-NBR (low temp. Buna) FPM 5˚ to 300˚F chlorinated hydrocarbons
Country of Installation
F = Australia
S = USA
S1 = Canada (CRN registered)
U = PED/CE
Maximum Working Pressure in bar
210 = 3000 psi (only available in sizes 4 liters & 6 liters)
262 = 3800 psi
330 = 4785 psi (only available for PED)
Fluid Port Connection
A = BSPP (ISO 228) Radial Seal Design NOT Axial
B = Metric (DIN 13)
Threaded C = SAE (ANSI B1.1)
D = NPT (ANSI B1.2)
E = SAE 2” - 3000 psi (Code 61)
Flanged F = SAE 1 1/2” - 6000 psi (Code 62)
G = SAE 1 1/4” - 3000 psi (Code 61) (only available in sizes 4 liters & 6 liters)
H = SAE 1” - 6000 psi (Code 62) (only available in sizes 1 liter & 4 liters)
Gas Precharge Pressure (Po) in bar
xxx = 3 digits
Model Code Part Number
SB330-4A1/112USFS1-210C 2214819
SB330-6A1/112USFS1-210C 2214820
SB330-10A1/112USFS1-330/262C 2212537
SB330-20A1/112USFS1-330/262C 2212538
SB330-32A1/112USFS1-330/262C 2212539
SB330-54A1/112USFS1-330/262C 2212540

Model Codes containing RED selections are non-standard items – Contact HYDAC for information and availability. Not all combinations are available.

B4 PN#02068195 / 4.21 / ACU1808-2025

 BLADDER ACCUMULATORS
Dimensions
Bottom Repairable
SB 330... (3000 psi)
Thread-J
Nom. Eff. Gas Q(2
Size Vol. Weight A B C ØD ØE
(L) Vol. NPTF gpm
(gal.) SAE
in 3 / (gal.) BSPP

66 10 12.0 2.0 2.3 4.5 1.4 1 1/16-12 UN

1 .25 3/4” 60
(0.29) (4.5) (303) (51) (58) (115) (36) (SAE-12)

226 30 16.3 2.6 2.3 6.6 2.1 1 5/8-12 UN

4 1 1 1/4” 160
(0.98) (14) (415) (66) (58) (168) (53) (SAE-20)

340 33 20.5 2.6 2.3 6.6 2.1 1 5/8-12 UN

6 1.5 1 1/4” 160
(1.47) (15) (521) (66) (58) (168) (53) (SAE-20)

566 86 22.0 3.1 2.3 9.1 3.0 1 7/8-12 UN

10 2.5 2” 240
(2.45) (39) (559) (80) (58) (231) (76) (SAE-24)
1125 140 34.5 3.1 2.3 9.1 3.0 1 7/8-12 UN
20 5 2” 240
(4.87) (63) (876) (80) (58) (231) (76) (SAE-24)
2080 226 54.7 3.1 2.3 9.1 3.0 1 7/8-12 UN
32 10 2” 240
(9.00) (102) (1390) (80) (58) (231) (76) (SAE-24)
2320 270 60.2 3.1 2.3 9.1 3.0 1 7/8-12 UN
42 11 2” 240
(10.04) (123) (1530) (80) (58) (231) (76) (SAE-24)
3205 330 78.3 3.1 2.3 9.1 3.0 1 7/8-12 UN
54 15 2” 240
(13.87) (150) (1990) (80) (58) (231) (76) (SAE-24)
See notes at bottom of page
Dimensions are for general information only, all critical dimensions should be verified.
Dimensions are in inches/(mm) and lbs/(kg)

SB 600... (5000 psi)

Thread-J
Nom. Eff. Gas
Size Q(2
Vol. Vol. Weight A B (1
C ØD ØE NPTF gpm
(L) SAE
(gal.) in 3 / (gal.) BSPP

66 17 13.2 2.4 2.3 2.1 1 5/8-12 UN

1 .25 4.5 (115) 1 1/4” 160
(0.29) (7.7) (335) (62) (58) (53) (SAE - 20)
226 33 16.3 2.5 2.3 2.1 1 5/8-12 UN
4 1 6.8 (173) 1 1/4” 160
(0.98) (15) (415) (64) (58) (53) (SAE - 20)
566 154 22.4 3.1 2.8 9.1-9.7 3.0 1 7/8-12 UN
10 2.5 2” 240
(2.45) (70) (568) (80) (70) (232-247) (76) (SAE - 24)
1125 248 35.0 3.1 2.8 9.1-9.7 3.0 1 7/8-12 UN
20 5 2” 240
(4.87) (113) (888) (80) (70) (232-247) (76) (SAE - 24)
2080 413 55.2 3.1 2.8 9.1-9.7 3.0 1 7/8-12 UN
32 10 2” 240
(9.00) (188) (1402) (80) (70) (232-247) (76) (SAE - 24)
3180 611 78.8 3.1 2.8 9.1-9.7 3.0 1 7/8-12 UN
54 15 2” 240
(13.77) (278) (2002) (80) (70) (232-247) (76) (SAE - 24)
See notes at bottom of page
Dimensions are for general information only, all critical dimensions should be verified.
Dimensions are in inches/(mm) and lbs/(kg)

Split Flange Connection (sizes 10 - 54)

Series B øE F Split Flange Connection Q(2 gpm
SB 330 4.1 2.8 SAE 2” – 3000 psi
240
SB 330 TR(3 (104) (71.4) Code 61
SB 600 5.5 2.5 SAE 1 1/2” – 5000 psi
240
SB 600 TR(3 (140) (63.5) Code 62
NOTE: Higher pressure may be available. Please consult HYDAC for more information.
1) Applies to SAE thread type only. For Split Flange, see separate chart and illustration.
2) Maximum discharge flow rate recommended for vertically mounted accumulators.
3) Sizes 10 to 54 only.

PN#02068195 / 4.21 / ACU1808-2025 B5

BLADDER ACCUMULATORS
Top Repairable and Modified Flow

SB 330 TR... (3000 psi)

Nom. Eff. Gas Thread-J
Size Q(2
Vol. Vol. Weight A B(1 C ØD ØE NPTF
(L) SAE gpm
(gal.) in 3 / (gal.) BSPP
566 94 21.3 3.1 1.6 9.1 3.0 1 7/8-12 UN
10 2.5 2” 240
(2.45) (43) (540) (80) (40) (231) (76) (SAE - 24)
1125 140 34.8 3.1 1.6 9.1 3.0 1 7/8-12 UN
20 5 2” 240
(4.87) (63) (883) (80) (40) (231) (76) (SAE - 24)
2080 226 55.0 3.1 1.6 9.1 3.0 1 7/8-12 UN
32 10 2” 240
(9.00) (102) (1397) (80) (40) (231) (76) (SAE - 24)
2320 270 60.2 3.1 1.6 9.1 3.0 1 7/8-12 UN
42 11 2” 240
(10.04) (123) (1530) (80) (40) (231) (76) (SAE - 24)
3205 330 78.6 3.1 1.6 9.1 3.0 1 7/8-12 UN
54 15 2” 240
(13.87) (150) (1997) (80) (40) (231) (76) (SAE - 24)
See notes at bottom of page
Dimensions are for general information only, all critical dimensions should be verified.
Dimensions are in inches/(mm) and lbs/(kg)

SB 600 TR... (5000 psi)

Thread J
Nom. Eff. Gas
Size Q(2
Vol. Vol. Weight A B(1 C ØD ØE
(L) NPTF gpm
(gal.) in 3 / (gal.) SAE
BSPP

566 154 20.9 3.1 1.6 9.1-9.7 3.0 1 7/8-12 UN

10 2.5 2” 240
(2.45) (70) (531) (80) (40) (232-247) (76) (SAE-24)
1125 248 33.5 3.1 1.6 9.1-9.7 3.0 1 7/8-12 UN
20 5 2” 240
(4.87) (113) (851) (80) (40) (232-247) (76) (SAE-24)
2080 413 53.7 3.1 1.6 9.1-9.7 3.0 1 7/8-12 UN
32 10 2” 240
(9.00) (188) (1364) (80) (40) (232-247) (76) (SAE-24)
3205 611 77.3 3.1 1.6 9.1-9.7 3.0 1 7/8-12 UN
54 15 2” 240
(13.87) (278) (1964) (80) (40) (232-247) (76) (SAE-24)
See notes at bottom of page
Dimensions are for general information only, all critical dimensions should be verified.
Dimensions are in inches/(mm) and lbs/(kg)

SB 330 NTR... (3000 psi, Modified Flow)

Nom. Eff. Gas Thread J
Size Q(2
Vol. Vol. Weight A B(1 C ØD ØE NPTF
(L) SAE gpm
(gal.) in / (gal.)
3
BSPP
566 94 21.3 3.1 1.6 9.1 3.0 1 7/8-12 UN
10 2.5 2” 240
(2.45) (43) (540) (80) (40) (231) (76) (SAE-24)
1125 140 34.8 3.1 1.6 9.1 3.0 1 7/8-12 UN
20 5 2” 240
(4.87) (63) (883) (80) (40) (231) (76) (SAE-24)
2080 226 55.0 3.1 1.6 9.1 3.0 1 7/8-12 UN
32 10 2” 240
(9.00) (102) (1397) (80) (40) (231) (76) (SAE-24)
3205 330 77.3 3.1 1.6 9.1 3.0 1 7/8-12 UN
54 15 2” 240
(13.87) (150) (1964) (80) (40) (231) (76) (SAE-24)
Dimensions are for general information only, all critical dimensions should be verified.
Dimensions are in inches/(mm) and lbs/(kg)

Note:
1) Applies to SAE thread type only. For Split Flange, see chart and illustration on previous page.
2) Maximum discharge flow rate recommended for vertically mounted accumulators.

B6 PN#02068195 / 4.21 / ACU1808-2025

 BLADDER ACCUMULATORS
Water Service
Size Effective Gas MAWP
Model Code P/N Fluid Connection Thread Size
(L) Vol (in3) psi/(bar)
3000
1 66 SB330-1A1/002S-210C 2055285 SAE 1 1/16" - 12 UN
(210)
3000
4 226 SB330-4A1/002S-210C 2055070 SAE 1 5/8" - 12 UN
(210)
3000
4 226 SB330-4A1/005S-210C 2092089 SAE 1 5/8" - 12 UN
(210)
3000
4 226 SB330-4A1/006S-210D (USES 1.25" NPT ADAP) 2091080 1 1/4" NPT
(210)
3000
6 340 SB330-6A1/002S-210D (USES 1.25" NPT ADAP) 2092310 1 1/4" NPT
(210)
3000
10 566 SB330-10A1/002S-210C 2055224 SAE 1 7/8" - 12 UN
(210)
3000
10 566 SB330-10A1/002S-210D 2087571 2" NPT
(210)
3000
10 566 SB330-10F1/002S-210E 2069474 Flanged SAE 2" (Code 61)
(210)
3000
20 1125 SB330-20A1/002S-210C 2054720 SAE 1 7/8" - 12 UN
(210)
3000
20 1125 SB330-20A1/002S-210D 2087570 2" NPT
(210)
3000
20 1125 SB330-20A1/002S1-210A CRN 2082666 2" BSPP
(210)
3000
20 1125 SB330-20A1/002S1-210C CRN 2084359 SAE 1 7/8" - 12 UN
(210)
3000
20 1125 SB330-20F1/002S-210E 2072909 Flanged SAE 2" (Code 61)
(210)
3000
32 2080 SB330-32A1/002S-210C 2083387 SAE 1 7/8" - 12 UN
(210)
3000
32 2080 SB330-32A1/002S-210D 2063921 2" NPT
(210)
3000
32 2080 SB330-32F1/002S-210E 2072536 Flanged SAE 2" (Code 61)
(210)
3000
54 3205 SB330-54A1/002S-210C 2055269 SAE 1 7/8" - 12 UN
(210)
3000
54 3205 SB330-54A1/002S-210D 2069311 2" NPT
(210)
3000
54 3205 SB330-54A1/002S1-210A CRN 2082667 2" BSPP
(210)
3000
54 3205 SB330-54F1/002S-210E 2055105 Flanged SAE 2" (Code 61)
(210)

5000
1 66 SB600-1A1/002S-345C 2054911 SAE 1 5/8" - 12 UN
(345)
5000
1 66 SB600-1F1/002S-345H 2094814 Flanged SAE 1" (Code 62)
(345)
5000
4 226 SB600-4A1/002S-345C 2055063 SAE 1 5/8" - 12 UN
(345)
5000
10 566 SB600-10A1/002S-345C 2055093 SAE 1 7/8" - 12 UN
(345)
5000
10 566 SB600-10A1/002S1-345C CRN 2093123 SAE 1 7/8" - 12 UN
(345)
5000
10 566 SB600-10F1/002S-345F 2089028 Flanged SAE 1 1/2" (Code 62)
(345)
5000
20 1125 SB600-20A1/002S-345C 2056383 SAE 1 7/8" - 12 UN
(345)
5000
20 1125 SB600-20F1/002S-345F 2083359 Flanged SAE 1 1/2" (Code 62)
(345)
6000
32 2080 SB600-32A1/002S-414A 2070756 2" BSPP
(414)
5000
32 2080 SB600-32F1/002S-345F 2076097 Flanged SAE 1 1/2" (Code 62)
(345)
5000
54 3180 SB600-54A1/002S-345C 2062971 SAE 1 7/8" - 12 UN
(345)
5000
54 3180 SB600-54A1/006S-345C 2094879 SAE 1 7/8" - 12 UN
(345)
5000
54 3180 SB600-54F1/002S-345F 2074828 Flanged SAE 1 1/2" (Code 62)
(345)

RED selections are non-standard items – Contact HYDAC for information and availability. Not all combinations are available.

PN#02068195 / 4.21 / ACU1808-2025 B7

BLADDER ACCUMULATORS
Stainless Steel Bladders
Model Code
SB 140 TR - 20 S 11/ 332S1-138C
Series
SB 140 = Bladder Accumulator (2000 psi, Nominal)
Design
TR = Top repairable
Size
10 = 2.5 gal
20 = 5 gal
35 = 10 gal
57 = 15 gal
Line Connection
S = Threaded (SAE Lock Nut)
F = Flanged (SAE Lock Nut)
Gas Port
11 = 2pc 316 SS Gas Valve
(see page H19 for permanent gauge blocks. See page H11 for charging and gauging info, FPO is recommended)
Fluid port
3 = 316 Stainless steel
Shell
3 = 316 Stainless steel (Static Storage Temp -40˚ C to 100˚ C) Vessel Only
(The maximum operating temperature of the standard accumulator design is 200°F; other options will be considered, upon request)
Bladder Compound
2 = NBR (Buna N) Compound Oper. Temp Range Typical Fluids
3 = ECO (Hydrin) NBR 5˚ to 180˚F mineral oils (standard)
4 = IIR (Butyl) 32˚ to 180˚F water & water-glycols (5% minimum glycol)
5 = ELT-NBR (extra low temp. Buna) LT-NBR -20˚ to 180˚F mineral oils (for low temperature)
ELT-NBR -50˚ to 220˚F mineral oils (for extra low temperature)
6 = FPM (Fluoroelastomer) ECO -40˚ to 250˚F mineral oils
7 = Others (available on request) IIR -20˚ to 200˚F phosphate esters & brake fluids
9 = LT-NBR (low temp. Buna) FPM 5˚ to 300˚F chlorinated hydrocarbons
Country of Installation
S1 = USA & Canada
Maximum Working Pressure (in bar)
138 = SB140’s 2000 PSI
Fluid Port Connection (316SS)
Threaded
C = SAE
D = NPT
Flanged
E = SAE 2” - 3000 psi

C SB 140... (2000 psi)

Thread J
Nom. Eff. Gas
Vol. Vol. Weight A B(1 C ØD ØE
(L) in 3 / (gal.) SAE NPTF

øD 10
566 150 20.8 3.2 1.6 9.0 3.0 1 7/8-12 UN
2”
(2.45) (68) (527) (82) (40) (229) (76) (SAE-24)
1125 200 33.0 3.2 1.6 9.0 3.0 1 7/8-12 UN
20 2”
(4.87) (92) (837) (82) (40) (229) (76) (SAE-24)
2080 290 53.4 3.2 1.6 9.0 3.0 1 7/8-12 UN
A 35
(9.00) (132) (1357) (82) (40) (229) (76) (SAE-24)
2”
3205 390 76.9 3.2 1.6 9.0 3.0 1 7/8-12 UN
57 2”
(13.87) (178) (1952) (82) (40) (229) (76) (SAE-24)
Dimensions are in inches/(mm) and lbs/(kg)

Model Code Part Number

SB140-10S11/332S-138C 2205654
B SB140-20S11/332S-138C 2205656
SB140-35S11/332S-138C 2205658
øE
SB140-57S11/332S-138C 2205660
J
Model Codes containing RED selections are non-standard items – Contact HYDAC for information and availability. Not all combinations are available.

B8 PN#02068195 / 4.21 / ACU1808-2025