Product Name: MOBIL COOLANT READY MIXED -36 C

Revision Date: 15 Feb 2021 Page 1 of

9

______________________________________________________________________________________________________________________

SAFETY DATA SHEET

SECTION 1 PRODUCT AND COMPANY IDENTIFICATION

PRODUCT
Product Name: MOBIL COOLANT READY MIXED -36 C
Product Description: Glycol
Product Code: 331058, 351010602010
Recommended Use: Antifreeze/coolant

COMPANY IDENTIFICATION
Supplier: ExxonMobil Asia Pacific Pte.Ltd. (Company No.: 196800312N)
1 HarbourFront Place
#06-00 HarbourFront Tower One 098633 Singapore

24 Hour Emergency Telephone (1) 609-737-4411 / +1-703-527-3887

Supplier General Contact (65) 6885 8000
FAX (65) 6885 8938

SECTION 2 HAZARDS IDENTIFICATION

This material is hazardous according to regulatory guidelines (see (M)SDS Section 15).

CLASSIFICATION:

Acute oral toxicant: Category 4. Specific target organ toxicant (repeated exposure): Category 2.

LABEL:
Symbol:

Signal Word: Warning

Hazard Statements:

Health: H302: Harmful if swallowed. H373: May cause damage to organs through prolonged or repeated
exposure. Kidney

Precautionary Statements:

General: P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach
of children. P103: Read label before use.
Prevention: P260: Do not breathe mist / vapours. P264: Wash skin thoroughly after handling. P270: Do not eat,
 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 2 of
9

______________________________________________________________________________________________________________________
drink or smoke when using this product.
Response: P301 + P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P314: Get medical advice/attention if you feel unwell. P330: Rinse mouth.
Disposal: P501: Dispose of contents and container in accordance with local regulations.

Contains: ETHYLENE GLYCOL

Other hazard information:

PHYSICAL / CHEMICAL HAZARDS

No significant hazards.

HEALTH HAZARDS
High-pressure injection under skin may cause serious damage. Ingestion may cause serious adverse effects
and may be fatal. May cause kidney failure and central nervous system effects. Prolonged exposure to
elevated concentrations of mist or liquid may cause irritation of the skin, eyes, and respiratory tract.

ENVIRONMENTAL HAZARDS
No significant hazards.

NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert
advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary
from person to person.

SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS

This material is defined as a mixture.

Hazardous Substance(s) or Complex Substance(s) required for disclosure

Name CAS# Concentration* GHS Hazard Codes
DISODIUM TETRABORATE PENTAHYDRATE 12179-04-3 0.5 - 1.3% H319(2A), H360(1B)(D),
H360(1B)(F)
ETHYLENE GLYCOL 107-21-1 50 - < 60% H302, H373

* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.

SECTION 4 FIRST AID MEASURES

INHALATION
Immediately remove from further exposure. Get immediate medical assistance. For those providing
assistance, avoid exposure to yourself or others. Use adequate respiratory protection. Give supplemental
oxygen, if available. If breathing has stopped, assist ventilation with a mechanical device.

SKIN CONTACT
Wash contact areas with soap and water. If product is injected into or under the skin, or into any part of the
body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by
a physician as a surgical emergency. Even though initial symptoms from high pressure injection may be
minimal or absent, early surgical treatment within the first few hours may significantly reduce the ultimate extent
of injury.
 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 3 of
9

______________________________________________________________________________________________________________________

EYE CONTACT
Flush thoroughly with water. If irritation occurs, get medical assistance.

INGESTION
Seek immediate medical attention.

NOTE TO PHYSICIAN
This product contains ethylene glycol and/or diethylene glycol which, if ingested, are metabolized to toxic
metabolites by the enzyme alcohol dehydrogenase, for which ethanol and 4-methylpyrazole \{U.S. drug name
Fomepizole, trade name Antizol\} are antagonists. Administration of oral or intravenous ethanol or intravenous
4-methylpyrazole may arrest further metabolism of this material and thereby ameliorate the toxicity. Use of
ethanol or 4-methylpyrazole does not affect toxic metabolites that are already present and is not a substitute for
hemodialysis.

SECTION 5 FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA
Appropriate Extinguishing Media: Use water fog, alcohol-resistant foam, dry chemical or carbon dioxide
(CO2) to extinguish flames.

Inappropriate Extinguishing Media: Straight streams of water or standard foam

FIRE FIGHTING
Fire Fighting Instructions: Evacuate area. Prevent run-off from fire control or dilution from entering
streams, sewers or drinking water supply. Fire-fighters should use standard protective equipment and in
enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces
and to protect personnel.

Unusual Fire Hazards: Hazardous material. Firefighters should consider protective equipment indicated in
Section 8.

Hazardous Combustion Products: Aldehydes, Incomplete combustion products, Oxides of carbon, Smoke,
Fume

FLAMMABILITY PROPERTIES
Flash Point [Method]: 111°C (232°F) [ASTM D-93]
Flammable Limits (Approximate volume % in air): LEL: N/D UEL: N/D
Autoignition Temperature: N/D

SECTION 6 ACCIDENTAL RELEASE MEASURES

NOTIFICATION PROCEDURES
In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable
regulations.

PROTECTIVE MEASURES
Avoid contact with spilled material. Warn or evacuate occupants in surrounding and downwind areas if
required, due to toxicity or flammability of the material. See Section 5 for fire fighting information. See the
Hazard Identification Section for Significant Hazards. See Section 4 for First Aid Advice. See Section 8 for
advice on the minimum requirements for personal protective equipment. Additional protective measures may be
 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 4 of
9

______________________________________________________________________________________________________________________
necessary, depending on the specific circumstances and/or the expert judgment of the emergency responders.

SPILL MANAGEMENT
Land Spill: Stop leak if you can do so without risk. Do not touch or walk through spilled material. Small
Spills: Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal.

Water Spill: Stop leak if you can do so without risk. This product emulsifies, disperses or is miscible in
water. Remove material, as much as possible, using mechanical equipment.

Water spill and land spill recommendations are based on the most likely spill scenario for this material;
however, geographic conditions, wind, temperature, (and in the case of a water spill) wave and current direction
and speed may greatly influence the appropriate action to be taken. For this reason, local experts should be
consulted. Note: Local regulations may prescribe or limit action to be taken.

ENVIRONMENTAL PRECAUTIONS
Remove debris in path of spill and remove contaminated debris from shoreline and water surface. Dispose of
according to local regulations. Large Spills: Dyke far ahead of liquid spill for later recovery and disposal.
Prevent entry into waterways, sewers, basements or confined areas.

SECTION 7 HANDLING AND STORAGE

HANDLING
Avoid breathing mists or vapour. Avoid contact with skin. Prevent small spills and leakage to avoid slip hazard.

Static Accumulator: This material is not a static accumulator.

STORAGE
Do not store in open or unlabelled containers.

SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION

EXPOSURE LIMIT VALUES

Exposure limits/standards (Note: Exposure limits are not additive)

Substance Name Form Limit/Standard Note Source Year

DISODIUM TETRABORATE TWA 1 mg/m3 Singapore 2006
PENTAHYDRATE PELs
DISODIUM TETRABORATE Inhalable STEL 6 mg/m3 ACGIH 2020
PENTAHYDRATE fraction.
DISODIUM TETRABORATE Inhalable TWA 2 mg/m3 ACGIH 2020
PENTAHYDRATE fraction.
ETHYLENE GLYCOL STEL 127 mg/m3 50 ppm Singapore 2006
PELs
ETHYLENE GLYCOL Aerosol, STEL 10 mg/m3 ACGIH 2020
inhalable
ETHYLENE GLYCOL Vapor STEL 50 ppm ACGIH 2020
fraction
ETHYLENE GLYCOL Vapor TWA 25 ppm ACGIH 2020
fraction
 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 5 of
9

______________________________________________________________________________________________________________________
NOTE: Limits/standards shown for guidance only. Follow applicable regulations.

ENGINEERING CONTROLS

The level of protection and types of controls necessary will vary depending upon potential exposure conditions.
Control measures to consider:
No special requirements under ordinary conditions of use and with adequate ventilation.

PERSONAL PROTECTION

Personal protective equipment selections vary based on potential exposure conditions such as applications,
handling practices, concentration and ventilation. Information on the selection of protective equipment for use
with this material, as provided below, is based upon intended, normal usage.

Respiratory Protection: If engineering controls do not maintain airborne contaminant concentrations at a

level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator
selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of
respirators to be considered for this material include:
No protection is ordinarily required under normal conditions of use and with adequate ventilation.
Particulate

For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode.
Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate,
gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.

Hand Protection: Any specific glove information provided is based on published literature and glove
manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions.
Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use
conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material
include:
If prolonged or repeated contact is likely, chemical-resistant gloves are recommended. If contact with
forearms is likely, wear gauntlet-style gloves. Nitrile,Viton

Eye Protection: If contact is likely, safety glasses with side shields are recommended.

Skin and Body Protection: Any specific clothing information provided is based on published literature or
manufacturer data. The types of clothing to be considered for this material include:
If prolonged or repeated contact is likely, chemical, and oil resistant clothing is recommended.

Specific Hygiene Measures: Always observe good personal hygiene measures, such as washing after
handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and
protective equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be
cleaned. Practice good housekeeping.

ENVIRONMENTAL CONTROLS
Comply with applicable environmental regulations limiting discharge to air, water and
soil. Protect the environment by applying appropriate control measures to prevent or limit
emissions.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 6 of
9

______________________________________________________________________________________________________________________

Note: Physical and chemical properties are provided for safety, health and environmental considerations only
and may not fully represent product specifications. Contact the Supplier for additional information.

GENERAL INFORMATION
Physical State: Liquid
Colour: Blue-Green
Odour: Odourless
Odour Threshold: N/D

IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION

Relative Density (at 20 °C): 1.07
Flammability (Solid, Gas): N/A
Flash Point [Method]: 111°C (232°F) [ASTM D-93]
Flammable Limits (Approximate volume % in air): LEL: N/D UEL: N/D
Autoignition Temperature: N/D
Boiling Point / Range: N/D
Decomposition Temperature: N/D
Vapour Density (Air = 1): N/D
Vapour Pressure: N/D
Evaporation Rate (n-butyl acetate = 1): N/D
pH: N/D
Log Pow (n-Octanol/Water Partition Coefficient): N/D
Solubility in Water: Complete
Viscosity: [N/D at 40 °C]
Oxidizing Properties: See Hazards Identification Section.

OTHER INFORMATION
Freezing Point: N/D
Melting Point: N/D

SECTION 10 STABILITY AND REACTIVITY

STABILITY: Material is stable under normal conditions.

CONDITIONS TO AVOID: Excessive heat. High energy sources of ignition.

MATERIALS TO AVOID: Strong Acids, Strong oxidisers

HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures.

POSSIBILITY OF HAZARDOUS REACTIONS: Hazardous polymerization will not occur.

SECTION 11 TOXICOLOGICAL INFORMATION

INFORMATION ON TOXICOLOGICAL EFFECTS

Hazard Class Conclusion / Remarks

Inhalation
Acute Toxicity: No end point data for Minimally Toxic. Based on assessment of the components.
material.
 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 7 of
9

______________________________________________________________________________________________________________________
Irritation: No end point data for material. Negligible hazard at ambient/normal handling temperatures.
Ingestion
Acute Toxicity (Human): LDLo 100 ml Moderately toxic. Based on assessment of the components.
Skin
Acute Toxicity: No end point data for Minimally Toxic. Based on assessment of the components.
material.
Skin Corrosion/Irritation: No end point data Negligible irritation to skin at ambient temperatures. Based on
for material. assessment of the components.
Eye
Serious Eye Damage/Irritation: No end point May cause mild, short-lasting discomfort to eyes. Based on
data for material. assessment of the components.
Sensitisation
Respiratory Sensitization: No end point data Not expected to be a respiratory sensitizer.
for material.
Skin Sensitization: No end point data for Not expected to be a skin sensitizer. Based on assessment of the
material. components.
Aspiration: No end point data for material. Not expected to be an aspiration hazard. Based on physico-
chemical properties of the material.
Germ Cell Mutagenicity: No end point data Not expected to be a germ cell mutagen. Based on assessment of
for material. the components.
Carcinogenicity: No end point data for Not expected to cause cancer. Based on assessment of the
material. components.
Reproductive Toxicity: No end point data Not expected to be a reproductive toxicant. Based on assessment
for material. of the components.
Lactation: No end point data for material. Not expected to cause harm to breast-fed children.
Specific Target Organ Toxicity (STOT)
Single Exposure: No end point data for Not expected to cause organ damage from a single exposure.
material.
Repeated Exposure: No end point data for Contains a substance that may cause damage to organs from
material. prolonged or repeated exposure. Based on assessment of the
components.

OTHER INFORMATION
For the product itself:
Target Organs Repeated Exposure: Kidney

Contains:
ETHYLENE GLYCOL (EG): Repeated high oral exposure has caused kidney damage, neurological effects,
degeneration of the liver and changes in blood chemistry and circulating blood cells in laboratory animals. Repeated
overexposure has the potential to cause similar toxic effects in humans. EG causes developmental and reproductive
effects at high dose levels in laboratory animals. The relevance of these findings to humans is uncertain. Sodium
tetraborate: Adverse effects on fertility and fetal development have been observed in laboratory animals.

IARC Classification:
The following ingredients are cited on the lists below: None.

--REGULATORY LISTS SEARCHED--

1 = IARC 1 2 = IARC 2A 3 = IARC 2B
 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 8 of
9

______________________________________________________________________________________________________________________
SECTION 12 ECOLOGICAL INFORMATION

The information given is based on data for the material, components of the material, or for similar materials, through the
application of bridging principals.

ECOTOXICITY
Material -- Not expected to be harmful to aquatic organisms.

MOBILITY
Material -- Expected to remain in water or migrate through soil.

PERSISTENCE AND DEGRADABILITY

Biodegradation:
Material -- Expected to be readily biodegradable.
Atmospheric Oxidation:
Material -- Expected to degrade rapidly in air

BIOACCUMULATION POTENTIAL
Material -- Potential to bioaccumulate is low.

SECTION 13 DISPOSAL CONSIDERATIONS

Disposal recommendations based on material as supplied. Disposal must be in accordance with current applicable
laws and regulations, and material characteristics at time of disposal.

DISPOSAL RECOMMENDATIONS
Even though this product is readily biodegradable, it must not be indiscriminately discarded into the
environment. Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by
supervised incineration at very high temperatures to prevent formation of undesirable combustion products.

Empty Container Warning Empty Container Warning (where applicable): Empty containers may contain residue
and can be dangerous. Do not attempt to refill or clean containers without proper instructions. Empty drums should
be completely drained and safely stored until appropriately reconditioned or disposed. Empty containers should be
taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with
governmental regulations. DO NOT PRESSURISE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE
SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION.
THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.

SECTION 14 TRANSPORT INFORMATION

LAND : Not Regulated for Land Transport

SEA (IMDG): Not Regulated for Sea Transport according to IMDG-Code

Marine Pollutant: No

AIR (IATA): Not Regulated for Air Transport

 Product Name: MOBIL COOLANT READY MIXED -36 C
Revision Date: 15 Feb 2021 Page 9 of
9

______________________________________________________________________________________________________________________

SECTION 15 REGULATORY INFORMATION

Material is hazardous as defined by Specification for hazard communication for hazardous chemicals and
dangerous goods (Singapore Standard SS586) Part 2:2014 - Globally harmonised system of classification and
labelling of chemicals - Singapore's adaptations.

REGULATORY STATUS AND APPLICABLE LAWS AND REGULATIONS

Listed or exempt from listing/notification on the following chemical inventories (May contain
substance(s) subject to notification to the EPA Active TSCA inventory prior to import to USA): AIIC,
DSL, ENCS, IECSC, KECI, PICCS, TCSI, TSCA

Workplace Safety and Health Act & Workplace Safety and Health (General Provisions) Regulations

SECTION 16 OTHER INFORMATION

N/D = Not determined, N/A = Not applicable

KEY TO THE H-CODES CONTAINED IN SECTION 3 OF THIS DOCUMENT (for information only):
H302: Harmful if swallowed; Acute Tox Oral, Cat 4
H319(2A): Causes serious eye irritation; Serious Eye Damage/Irr, Cat 2A
H360(1B)(D): May damage the unborn child; Repro Tox, Cat 1B (Develop)
H360(1B)(F): May damage fertility; Repro Tox, Cat 1B (Fertility)
H373: May cause damage to organs through prolonged or repeated exposure; Target Organ, Repeated, Cat 2

THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:

Section 08: Exposure Limits Table information was modified.
Section 11: Target Organ Toxicity - Repeat Conclusion information was modified.
Section 14: Label(s) information was deleted.

-----------------------------------------------------------------------------------------------------------------------------------------------------
The information and recommendations contained herein are, to the best of ExxonMobil's knowledge and belief,
accurate and reliable as of the date issued. You can contact ExxonMobil to insure that this document is the most
current available from ExxonMobil. The information and recommendations are offered for the user's consideration and
examination. It is the user's responsibility to satisfy itself that the product is suitable for the intended use. If buyer
repackages this product, it is the user's responsibility to insure proper health, safety and other necessary information is
included with and/or on the container. Appropriate warnings and safe-handling procedures should be provided to
handlers and users. Alteration of this document is strictly prohibited. Except to the extent required by law, re-
publication or retransmission of this document, in whole or in part, is not permitted. The term, "ExxonMobil" is used for
convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any
affiliates in which they directly of indirectly hold any interest.

-----------------------------------------------------------------------------------------------------------------------------------------------------
DGN: 7078548XSG (551457)

-----------------------------------------------------------------------------------------------------------------------------------------------------