BD-J5700

Blu-ray™ Disc Player

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register

ENGLISH
Safety Information
●● Before connecting the AC power cord -- Accumulated dust can cause an
to the DC adaptor outlet, make sure the electric shock, an electric leakage,
voltage designation of the DC adaptor or a fire by causing the power cord
corresponds to the local electrical supply. to generate sparks and heat or the
Warning insulation to deteriorate.
●● Never insert anything metallic into the
open parts of this apparatus. Doing so ●● Contact an authorized service center for
CAUTION This symbol indicates that may create a danger of electric shock. information if you intend to install your
high voltage is present product in a location with heavy dust,
●● To avoid electric shock, never touch the
inside. It is dangerous to high or low temperatures, high humidity,
RISK OF ELECTRIC SHOCK. DO NOT OPEN make any kind of contact inside of this apparatus. Only a qualified
with any internal part of technician should open this apparatus. chemical substances, or where it will
this product. operate 24 hours a day such as in an
●● Make sure to plug the power cord in
CAUTION : TO REDUCE THE RISK OF airport, a train station, etc. Failing to do
until it is firmly seated. When unplugging
ELECTRIC SHOCK, DO NOT REMOVE This symbol indicates so may lead to serious damage to your
the power cord from a wall outlet,
THE COVER (OR BACK). THERE ARE that important literature product.
always pull on the power cord's plug.
NO USER SERVICEABLE PARTS INSIDE. concerning operation Use only a properly grounded plug and
and maintenance has Never unplug by pulling on the power ●●

REFER ALL SERVICING TO QUALIFIED cord. Do not touch the power cord with wall outlet.
been included with this
PERSONNEL. product. wet hands. -- An improper ground may cause
●● If this apparatus does not operate electric shock or equipment damage.
normally - in particular, if there are any (Class l Equipment only.)
●● The slots and openings in the cabinet and ●● This apparatus uses batteries. In your
in the back or bottom are provided for unusual sounds or smells coming from it ●● To turn this apparatus off completely,
community, there might be environmental
necessary ventilation. To ensure reliable - unplug it immediately and contact an you must disconnect it from the wall
regulations that require you to dispose of
operation of this apparatus, and to authorized dealer or service center. outlet. Consequently, the wall outlet and
these batteries properly. Please contact your
protect it from overheating, these slots Maintenance of Cabinet. power plug must be readily accessible at
local authorities for disposal or recycling ●●

and openings must never be blocked or all times.

information. -- Before connecting other components to
covered. this product, be sure to turn them off. ●● Do not allow children to hang on the
●● Do not overload wall outlets, extension
-- Do not place this apparatus in a product.
cords or adaptors beyond their capacity, -- If you move your product suddenly
confined space, such as a bookcase, since this can result in fire or electric from a cold place to a warm place, ●● Store the accessories (battery, etc.) in
or built-in cabinet, unless proper shock. condensation may occur on the a location safely out of the reach of
ventilation is provided. operating parts and lens and cause children.
●● Route power-supply cords so that they
-- Do not place this apparatus near or are not likely to be walked on or pinched abnormal disc playback. If this occurs, ●● Do not install the product in an unstable
over a radiator or heat register, or by items placed on or against them. Pay unplug the product, wait for two hours, location such as a shaky self, a slanted
where it is exposed to direct sunlight. particular attention to cords at the plug and then connect the plug to the power floor, or a location exposed to vibration.
-- Do not place vessels (vases etc.) end, at wall outlets, and the point where outlet. Then, insert the disc, and try to ●● Do not drop or strike the product. If the
containing water on this apparatus. A they exit from the apparatus. play back again. product is damaged, disconnect the
water spill can cause a fire or electric ●● To protect this apparatus from a lightning ●● Be sure to pull the power plug out of the power cord and contact a service center.
shock. storm, or when it is left unattended and outlet if the product is to remain unused ●● To clean this apparatus, unplug the power
●● Do not expose this apparatus to rain unused for long periods of time, unplug or if you are leaving the house for an cord from the wall outlet and wipe the
or place it near water (near a bathtub, it from the wall outlet and disconnect the extended period of time (especially when product using a soft, dry cloth. Do not
washbowl, kitchen sink, or pool, etc.). antenna or cable system. This will prevent children, elderly, or disabled people will use any chemicals such as wax, benzene,
If this apparatus accidentally gets wet, damage to the set due to lightning and be left alone in the house). alcohol, thinners, insecticide, air fresheners,
unplug it and contact an authorized dealer power line surges. lubricants, or detergent. These chemicals
immediately. can damage the appearance of the product
or erase the printing on the product.

2
●● Do not expose this apparatus to dripping The user is encouraged to try to correct CAUTION : 777 Do not block any ventilation openings.
or splashing. Do not put objects filled the interference by one or more of the ●● CLASS 3B VISIBLE AND INVISIBLE LASER Install in accordance with the
with liquids, such as vases on the following measures: RADIATION WHEN OPEN. AVOID manufacturer's instructions.
apparatus. ●● Reorienting or relocating the receiving EXPOSURE TO THE BEAM. (IEC 60825-1) 888 Do not install near any heat sources such
●● Do not dispose of batteries in a fire. antenna. ●● THIS PRODUCT UTILIZES A LASER. USE
as radiators, heat registers, stoves, or
●● Do not plug multiple electric devices ●● Increasing the separation between the OF CONTROLS OR ADJUSTMENTS OR other apparatus (including AV receivers)
that produce heat.
into the same wall socket. Overloading a equipment and receiver. PERFORMANCE OF PROCEDURES OTHER
socket can cause it to overheat, resulting THAN THOSE SPECIFIED HEREIN MAY 999 Do not defeat the safety purpose of
●● Connecting this equipment to an outlet

in a fire. RESULT IN HAZARDOUS RADIATION the polarized or grounding-type plug.

that is on a different circuit than the one A polarized plug has two blades with
●● There is danger of an explosion if you the receiver is connected to. EXPOSURE. DO NOT OPEN COVER
one wider than the other. A grounding
replace the batteries used in the remote ●● Consulting the dealer or an experienced
AND DO NOT REPAIR YOURSELF. REFER
type plug has two blades and a third
with the wrong type of battery. Replace radio/TV technician for help. SERVICING TO QUALIFIED PERSONNEL.
grounding prong. The wide blade or
only with the same or equivalent type. This class B digital product meets all the third prong are provided for your
WARNING - TO PREVENT CLASS 1 LASER PRODUCT safety. If the provided plug does not fit
●●
requirements of the Canadian Interference -
THE SPREAD OF FIRE, Causing Equipment Regulations KLASSE 1 LASER PRODUKT into your outlet, consult an electrician
KEEP CANDLES AND LUOKAN 1 LASER LAITE for replacement of the obsolete outlet.
OTHER ITEMS WITH OPEN KLASS 1 LASER APPARAT 1111 Protect the power cord from being
Note to CATV system installer
FLAMES AWAY FROM THIS walked on or pinched particularly at
PRODUCT AT ALL TIMES.
PRODUCTO LÁSER CLASE 1 plugs, convenience receptacles, and the
This reminder is provided to call the CATV
WARNING point where it exits the apparatus.
●●
system installer's attention to Article 820-
-- This product contains chemicals known 40 of the National Electrical Code (Section ✎✎ NOTES 1111 Only use attachments/accessories
to the State of California to cause 54 of Canadian Electrical Code, Part I) that ■■ If the Region number of a Blu-ray specified by the manufacturer.
cancer and reproductive toxicity. provides guidelines for proper grounding Disc/DVDs does not correspond to 1111 Use only with the
and, in particular, specifies that the cable the Region number of this player, cart, stand, tripod,
-- To reduce the risk of fire or electric
ground shall be connected to the grounding the player cannot play the disc. bracket, or table
shock, do not expose this appliance to
system of the building as close to the point specified by the
rain or moisture. manufacturer,
of cable entry as practical. Precautions or sold with the
FCC NOTE (for U.S.A) apparatus. When
CLASS 1 LASER product a cart is used, use
Important Safety Instructions
This equipment has been tested and found caution when moving the cart/apparatus
to comply with the limits for a Class B digital This Compact Disc player is classified as a combination to avoid injury from tip-over.
CLASS 1 LASER product. Use of controls, Read these operating instructions carefully
device, pursuant to Part 15 of the FCC 1111 Unplug this apparatus during lightning
adjustments or performance of procedures before using the unit. Follow all the safety
rules. These limits are designed to provide storms or when unused for long periods
other than those specified herein may result instructions listed below.
reasonable protection against harmful of time.
in hazardous radiation exposure. Keep these operating instructions handy for
interference in a residential installation. 1111 Refer all servicing to qualified service
future reference.
This equipment generates, uses and can Complies with 21CFR 1040.10 except for personnel. Servicing is required when
radiate radio frequency energy and, if not deviations pursuant to Laser Notice No. 50, 111 Read these instructions. the apparatus has been damaged in any
installed and used in accordance with the dated June 24, 2007. 222 Keep these instructions. way, such as when the power-supply
instructions, may cause harmful interference DANGER : 333 Heed all warnings. cord or plug is damaged, liquid has
to radio or television reception, which can ●● VISIBLE AND INVISIBLE LASER RADIATION
been spilled or objects have fallen into
444 Follow all instructions. the apparatus, the apparatus has been
be determined by turning the equipment
WHEN OPEN. AVOID DIRECT EXPOSURE 555 Do not use this apparatus near water. exposed to rain or moisture, does not
off and on.
TO BEAM. (FDA 21 CFR) operate normally, or has been dropped.
666 Clean only with a dry cloth.

3
Contents Getting Started
Safety Information Network Settings................................ 14 Before using the User Manual
Warning................................................ 2 System Settings................................... 17
Language Settings.............................. 17 Disc Types and Contents your player can play
Precautions........................................... 3
Security Settings................................. 17
Getting Started Media Disc Type Details
General Settings................................. 18
Before using the User Manual............... 4 Support Settings................................. 18 Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.

Logos of Discs the player can play.......... 5 DVD-VIDEO

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-
Media Play VIDEO DVD-RW
Accessories........................................... 6 R/+R that have been recorded and finalized, or
DVD-R
Playing a Commercially Recorded a USB storage media containing MKV or MP4
Front Panel........................................... 7 DVD+RW
contents.
Disc .................................................. 19 DVD+R
Rear Panel............................................ 7
Playing Files on a USB Device............... 19 CD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-
Remote Control.................................... 7
MUSIC DVD-RW/-R, RE/-R or a USB storage media containing MP3 or
Playing a Disc with User Recorded
BD-RE/-R WMA contents.
Connections Content.............................................. 20 CD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-
Connecting to a TV............................... 8 Using DLNA........................................ 20 PHOTO DVD-RW/-R, RE/-R or a USB storage media containing JPEG
Connecting to an Audio System............ 8 Controlling Video Playback.................. 21 BD-RE/-R contents.

Connecting to a Network Router........... 9 Controlling Music Playback.................. 21 ✎✎ NOTES

Playing Photo Contents....................... 23 ■■ The player may not play certain CD-RW/-R and DVD-R because of the disc type or
Settings recording conditions.
Using Netflix....................................... 23 ■■ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
The Setup Procedure........................... 10
Using Pandora.................................... 24 ■■ Your player will not play content that has been recorded on a DVD-R at a bit-rate
Wired Network................................... 10 that exceeds 10 Mbps.
Using YouTube.................................... 24
Wireless Network................................ 10
■■ Your player will not play content that has been recorded on a BD-R or USB device
at a bitrate that exceeds 25 Mbps.
Menu Navigation................................ 11 Appendix ■■ Playback may not work for some types of discs, or when you use specific functions,
Accessing the Settings Menu............... 11 such as angle change and aspect ratio adjustment. Information about the discs is
Troubleshooting.................................. 26
written in detail on the disc box. Please refer to this if necessary.
Picture Settings................................... 11 Specifications...................................... 27 ■■ When you play a BD-J title, loading may take longer than a normal title or some
Sound Settings.................................... 12 functions may perform slowly.

Disc types your player cannot play

●● HD DVD ●● DVD-RAM ●● DVD-RW (VR mode) ●● 3.9 GB DVD-R
●● DVD-ROM/PD/ ●● Super Audio CD ●● CVD/CD-ROM/CDV/ for Authoring.
MV, etc (except CD layer) CD-G /CD-I / LD
(CD-Gs play audio
only, not graphics.)

4
Region Code Logos of Discs the player can longer the image takes to display.
play ●● This player cannot play MP3 files with DRM (Digital Rights Management) downloaded
Both players and discs are coded by region. from commercial sites.
These regional codes must match for a disc ●● Your player only supports video with a frame rate under 30fps (frames per second).
to play. If the codes do not match, the disc
will not play.
●● Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
The Region Code for this player is displayed on and USB HDD. (HUB is not supported.)
the rear panel of the player. ●● Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible
with this player.
Disc Region Blu-ray Disc BD-LIVE ●● If some USB devices require excessive power, they may be limited by the circuit safety
Area
Type Code device.
North America, Central ●● If playback from a USB HDD is unstable, provide additional power by plugging the HDD
into a wall socket.
a America, South America,
Korea, Japan, Taiwan, Hong If the problem continues, contact the USB HDD manufacturer.
Kong and South East Asia. SAMSUNG is not responsible for any data file damage or data loss.
NTSC broadcast system in U.S.A, Canada, ●●

Europe, Greenland, Korea, Japan ●● Your player does not support NTFS compressed files, sparse files, or encrypted files.
Blu-ray
Disc b French territories, Middle
East, Africa, Australia and
Supported File Formats
●● You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
New Zealand. Supported Video File Formats

c India, China, Russia,

Central and South Asia.
Notes on the USB connection File
Extension
Container Video Codec Audio Codec Resolution
●● Your player supports USB storage media,
MP3 players, digital cameras, and USB MP3
1 The U.S., U.S. territories and
Canada
●●
card readers.
The player does not support folder or file *.avi AVI
MP4v3
Dolby Digital
DTS
1920x1080

names longer than 128 characters. WMA

Europe, Japan, the Middle H.264 BP/MP/HP 1920x1080
2 East, Egypt, South Africa,
Greenland
●● Some USB/External HDD/digital camera
devices may not be compatible with the
PCM

player. VC-1 AP MP3 1920x1080

Taiwan, Korea, the Your player supports the FAT16, FAT32, *.mkv MKV Dolby Digital
3
●●
Philippines, Indonesia, H.264 BP/MP/HP DTS 1920x1080
and NTFS file systems.
Hong Kong
DVD- ●● Connect USB devices directly to the player’s
Mexico, South America, VC-1 AP 1920x1080
VIDEO USB port. Connecting through a USB cable *.wmv WMV (wmv9) WMA
4 Central America,
Australia, New Zealand, ●●
may cause compatibility problems.
Inserting more than one memory device
VC-1 SM 1920x1080
Pacific Islands, Caribbean MP4 (mp4v) 1920x1080
into a multi-card reader may cause the *.mp4 MP4 AAC
Russia, Eastern Europe, India, reader to operate improperly. H.264 BP/MP/HP 1920x1080
5 most of Africa, North Korea,
Mongolia
●● The player does not support the PTP
protocol. MPEG1 1920x1080
MP1, 2
*.mpg
●● Do not disconnect a USB device while it MPEG MPEG2 Dolby Digital 1920x1080
*.mpeg
6 China
●●
is transferring, playing, or recording files.
The bigger the image resolution, the H.264 BP/MP/HP
DTS
1920x1080

5
•• Limitations AVCHD (Advanced Video Codec High Definition)
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem. ●● This player can play back AVCHD format discs. These discs are normally recorded and
-- Normal playback is not guaranteed if the file’s container information is wrong or the used in camcorders.
file itself is corrupted. ●● The AVCHD format is a high definition digital video camera format.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video ●● The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
playback. conventional image compressing format.
-- The Seek (skip) function is not available if the file’s index table is damaged. ●● Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs
•• Video decoder that use the "x.v.Color" format.
-- Supports up to H.264 Level 4.1 and AVCHD ●● "x.v.Color" is a trademark of Sony Corporation.
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4 ●● "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co.,
-- MPEG4 SP, ASP : Ltd. and Sony Corporation.
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
✎✎ NOTES
■■ Some AVCHD format discs may not play, depending on the recording condition.
•• Audio decoder AVCHD format discs need to be finalized.
-- Supports WMA 7, 8, 9 and STD ■■ "x.v.Color" offers a wider color range than normal DVD camcorder discs.
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bitrate: 320kbps Accessories
Supported Music File Formats
The following accessories are included with your Blu-ray player:
File Audio
Container Support Range
Extension Codec

*.mp3 MP3 MP3 -

* Sampling rates (in kHz) - 8, 11, 16, 22, 32,

*.wma WMA WMA 44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps

Supported Picture File Formats

Batteries for Remote
Control (AAA Size) User Manual Remote Control
File Extension Type Resolution (AK68-02527A) (AK59-00149A)
(4301-000115)
*.jpg
*.jpeg JPEG 15360x8640
*.jpe

*.png PNG 15360x8640

6
 Front Panel Remote Control

REMOTE CONTROL SENSOR POWER BUTTON

Tour of the Remote Control

Turn the TV on and off.

Turn the player on and off. (This button is only available for Samsung TVs,)
After setup, allows you to set the input
source on your TV.
(This button is only available for Samsung TVs,)
Press to open and close the disc tray. TV volume adjustment.
(This button is only available for Samsung TVs,)

Press the number buttons to operate options.

DISC TRAY USB HOST OPEN/CLOSE BUTTON

Use to enter the disc menu. Use to enter the popup menu/title menu.

✎✎ NOTES Press to skip backwards or forwards. Press to search a disc backwards or

forwards.
■■ You can perform software upgrades using the USB Host jack with a USB flash Press to stop a disc. Press to pause a disc.

memory stick only. Press to play a disc. Press to move to the Home menu.
Use to access various audio functions on Press to switch the Blu-ray Disc/DVD’s
■■ Please open and pull out the USB cover before inserting USB device. a disc (Blu-ray Disc/DVD). subtitle language.

Press to use the Tools menu. Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change
Rear Panel menu values.

Return to the previous menu. Press to exit the menu.

These buttons are used both for menus on the Press to see the full screen on a TV.
player and also several Blu-ray Disc functions. BONUS REPEAT REPEAT FULL During Blu-ray Disc/DVD playback, the
Press to use the bonusview function. VIEW A-B SCREEN
Full Screen button does not operate.
Allows you to play selected portions of a Allows you to repeat a title, chapter,
disc repeatedly. track, or disc.

Installing batteries
●● Check if the remote sensor is blocked by
obstacles.
●● Check if there is any fluorescent lighting
nearby.
HDMI OUT LAN DIGITAL AUDIO OUT
!! CAUTION
■■ Dispose of batteries according to local
environmental regulations. Do not put them
in the household trash.
■■ Do not dispose of batteries in a fire.
✎✎NOTES ■■ Do not short circuit, disassemble or
overheat the batteries.
■■ If the remote does not operate properly: ■■ Danger of explosion if batteries are
●● Check the polarity (+/–) of the batteries.

●● Check if the batteries are drained.

incorrectly replaced. Replace only with the
same or equivalent type.

7
Connections Connecting to an Audio System

You can connect the Blu-ray player to an audio system using one of the
Connecting to a TV methods illustrated below.
-- Do not connect the power cord to the wall outlet until you have made all
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back the other connections.
of the product to the HDMI IN jack on your TV.
-- When you change the connections, turn off all devices before you start.
-- Do not connect the power cord to the wall outlet until you have made all
the other connections. Method 1 Connecting to an HDMI compatible AV receiver
-- When you change the connections, turn off all devices before you start.
●● Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your receiver.
●● Best quality (Recommended)

Method 2 Connecting to an AV receiver with a Digital Coaxial Cable

Audio ●● Using a digital Coaxial cable (not supplied), connect the Coaxial Digital
Video Audio Out jack on the product to the Digital Coaxial In jack of the receiver.
●● Good quality
●● You will hear sound only through the front two speakers with Digital Output
set to PCM.

✎✎ NOTES
■■ If you use an HDMI-to-DVI cable to connect to your display device, you must also
connect the Digital Audio Out on the player to an audio system to hear audio.
■■ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
■■ Depending on your TV, certain HDMI output resolutions may not work. Please refer
Method 1 Method 2
to the user manual of your TV.
Audio Audio
■■ When you connect the player to your TV using an HDMI cable or to a new TV, and
then turn it on for the first time, the player automatically sets the HDMI output
resolution to the highest supported by the TV.
■■ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to
Off in the menu.
■■ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a
high speed HDMI cable.
■■ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection),
random noise appears on the screen.

8
 Connecting to a Network Router Wireless Network

You can connect your player to your network router using one of the methods
illustrated below.
To use DLNA network functionality, you must connect your PC to your network
as shown in the illustrations.
The connection can be wired or wireless.

Wired Network Wireless Router

Broadband
Broadband modem service
(with integrated router)
Broadband

Or
service ✎✎ NOTES
■■ If your wireless router supports DHCP, this player can use a DHCP or static IP
address to connect to the wireless network.
■■ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
Router
■■ The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Broadband
service ■■ Select a channel on the wireless router that is not currently being used. If the
Broadband channel set for the wireless router is currently being used by another device
modem nearby, it will result in interference and communication failure.
■■ In compliance with the newest Wi-Fi certification specifications, Samsung
Blu-ray players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security
encryption in networks running in the 802.11n mode.
✎✎ NOTES ■■ Wireless LAN, by its nature, may cause interference, depending on the
■■ Internet access to Samsung's software update server may not be allowed, operating conditions (router performance, distance, obstacles, interference by
depending on the router you use or your ISP's policy. For more information, contact other radio devices, etc).
your ISP (Internet Service Provider).
■■ DSL users, please use a router to make a network connection.

9
Settings 555 If you have connected a LAN
cable to the Blu-ray player, Initial
Wireless Network
Setup defaults to Wired Network. 111 The Blu-ray player automatically
The Setup Procedure Setup I On-Screen Language Go to the Wired Network section searches for and then lists all wireless
Select a language for the on-screen displays.
below. If you have not connected networks that are within range.
Български
a LAN cable, Initial Setup defaults
~~ The Home screen will not appear if Hrvatski to Wireless Network. Go to the Setup I Network

you do not configure the Setup. Dansk

Wireless Network section in the Select your network type.

~~ The OSD (On Screen Display) may Nederlands next column Network type
Wireless network
Wireless

change in this player after you upgrade

English

✎✎ NOTE
Add Network You can connect your Blu-ray
player to the internet. Please
the software version. > Move " Select select which wireless network

~~ The access steps may differ

■■ If you have no network, select Skip to use.

depending on the menu you 222 Select the desired language, by pressing the BLUE (D) button, WPS(PBC) Search

and then press the v button. and then go to Step 6.

selected. a Previous d Skip m Move " Select

~~ After the Setup process is complete, The Start screen appears. 666 The Setup Complete window
you can then operate the panel Setup appears and remains on the 222 Select a network, and then press the
buttons and remote control. screen for a few moments. Then, v button. The keyboard appears.
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
the Home screen appears.
After you have connected the player Setup I Network
Security Key

to your TV, turn on the TV and

player. When you turn on the player
Start
Wired Network Enter security key.
linksys3
solugen_edu#2
iptime23
0 / 64

solugen_edu#1

the first time, the player's Setup Caps 1 2 3 4 5 6 7 8 9 0  Clear

screen appears on the TV. The Setup 111 The Blu-ray player automatically
q w e r t y u i o p ^ * 
123#& a s d f g h j k l ~ @ ! Done
a Previous " Select
procedure lets you set the On Screen
z x c v b n m , . ? - ▲ Cancel

verifies your wired network. ENG

WPS(PBC) Refresh
.com ◀ ▶ ▼

Display (OSD) and menu languages, " Select ' Return

the aspect ratio (screen size), the 333 Press the v button. The TV Setup I Network a Previous d Skip m Move " Select
network type, and connect the player Aspect screen appears.
to your network. 444 On the TV Aspect screen, select
Select your network type.
Network type Wired
333 If your network has a password, use
To run the Setup procedure, follow the desired TV Aspect Ratio, and Connect
the keyboard to enter it. Press the
these steps: then press the v button. The Network cable connected.
number buttons on your remote to
111 Plug in the Blu-ray player, turn on Network screen appears. enter numbers. Use the keyboard to
your TV, and then turn on the Blu- enter letters. When finished, use the
ray player by pressing the POWER
✎✎ NOTE a Previous d Skip m Move " Select
▲▼◀▶ buttons to select Done, and
button on the remote. The Setup
■■ An explanation of each Aspect Ratio then press the v button.
appears on the screen. Highlight
Language screen appears. each choice to see each explanation. 222 After the player verifies the If you have no password, go to Step 4.
If you have an HDTV, we suggest network, press the v button. 444 After the player verifies the
you choose 16:9 original. 333 Go to Step 6 of The Setup network, press the v button.
Procedure above.

10
555 Go to Step 6 of The Setup ■■ If you leave the player in the stop ●● Home Menu Accessing the Settings Menu
Procedure on the previous page. mode for more than 5 minutes
without using it, a screen saver will 5 1
✎✎ NOTES appear on your TV. If the player is Play Disc Photos Videos Music To access the Settings menu and sub-
■■ The Home screen will not appear if left in the screen saver mode for menus, follow these steps:
you do not configure the player's more than 25 minutes, the power 2
6 111 Press the POWER button.
settings during Setup, except as will automatically turn off.
No Disc The Home Menu appears.
noted below.
222 Press the ▲▼◀▶ buttons to
■■ If you press the BLUE (D) button Menu Navigation 7 3 select Settings, and then press the
during network setup, you can App 1 App 2 App 3 App 4 App 5 More Change Device Settings

access the Home screen even if the 4 v button.

network setup is not completed yet. 8
333 Press the ▲▼ buttons to select
■■ If you do not complete network set the desired submenu, and then
up during the Initial Setup, you can 1 1 Access and play Videos.
press the v button.
do it later. See page 14. 2 Access and play Music.
■■ When you return to the Home 444 Press the ▲▼ buttons to select
screen, the full screen mode is 3 3 Access and change Settings. the desired item, and then press
cancelled automatically. the v button.
4 Change the Source Device.
■■ If you want to display the Setup 2 4 555 Press the EXIT button to exit the
screen again to make changes, press 5 Access and view Photos. menu.
the ^ button on the front panel of
the player for more than 5 seconds HOME
BONUS REPEAT REPEAT

VIEWButton
A-B : Press
FULL

to move to
SCREEN
6 Play a DISC. ✎✎ NOTES
with no disc inserted. This resets the 1 7 Access and use applications. The access steps may differ depending
the Home menu. ■■

player to its default settings. on the menu you selected. The OSD
■■ After the Setup process is complete, you RETURN Button : Return to the 8 Access More applications. (On Screen Display) may change in
2
can operate the HDMI-CEC function. previous menu. this player after you upgrade the
■■ If you want to use an Anynet+
v (Enter) / DIRECTION Button :
✎✎ NOTE software version.
(HDMI-CEC) function to aid in the Move the cursor or select an item. ■■ The Videos, Photos, and Music
initial set up process, please follow 3
Activate the currently selected item. options require that you have an
the instructions below. appropriate disc in the player or a USB
Picture Settings
Confirm a setting.
1) Connect the player to an flash device attached to the player.
Anynet+(HDMI-CEC) compliant
4
EXIT Button : Press to exit the You can configure various display
Samsung TV using an HDMI Cable. current menu. options such as the TV Aspect Ratio,
2) Set the Anynet+(HDMI-CEC) feature Resolution, etc.
to On in both the TV and the player.
3) Set the TV to the Setup Procedure. TV Aspect Ratio
Depending on the type of television
you have, you may want to adjust the
screen size setting.

11
✎✎ NOTES Resolution ●● DVD playback Movie Frame (24Fs)
■■ Depending on the disc type, some HDMI / connected
aspect ratios may not be available. Lets you set the output resolution Output Setting the Movie Frame (24Fs) feature
of the HDMI video signal to Auto, Setup HDMI Mode to Auto allows you to adjust the
■■ If you select an aspect ratio and
option which is different than the 1080p, 1080i, 720p, or 480p. The player’s HDMI output to 24 frames per
BD Wise 480i
aspect ratio of your TV screen, the number indicates the number of second for improved picture quality.
picture might appear to be distorted. lines of video per frame. The i and p Max. Resolution of TV You can enjoy the Movie Frame (24Fs)
Auto
input feature only on a TV supporting this
indicate interlaced and progressive
BD Wise (Samsung TVs only) scan, respectively. The more lines, the 1080p 1080p frame rate. You can select Movie
higher the quality. Frame only when the player is in the
BD Wise is Samsung’s latest inter- 1080i 1080i
HDMI 1080p output resolution mode.
connectivity feature. Resolution according to the output 720p 720p
When you connect a Samsung player mode 480p 480p
HDMI Color Format
and a Samsung TV with BD Wise to
Blu-ray Disc/E-contents/Digital Lets you set the color space format
each other via HDMI, and BD Wise
●●

Contents playback
✎✎ NOTES for HDMI output to match the
is on in both the player and TV, the ■■ If the TV you connected to the player
does not support Movie Frame or capabilities of the connected device
player outputs video at the video HDMI / connected
the resolution you selected, the (TV, monitor, etc).
resolution and frame rate of the Blu- Output HDMI Mode message "If no pictures are shown
ray Disc/DVD. after selecting ‘Yes’, please wait for HDMI Deep Color
E-contents/
Setup Blu-ray 15 seconds to return to the previous
✎✎ NOTES Disc
Digital
contents
resolution." appears. If you select Lets you output video from the HDMI
■■ When BD Wise is on, the Resolution Yes, the TV’s screen will go blank for OUT jack with Deep Color. Deep
setting automatically defaults to BD Resolution of 15 seconds, and then the resolution Color provides more accurate color
BD Wise 1080p
Wise and BD Wise appears in the Blu-ray Disc will revert to the previous resolution
reproduction with greater color depth.
Resolution menu. Max. Max. automatically.
■■ If the player is connected to a device Auto Resolution of Resolution of ■■ If the screen stays blank after you have
that does not support BD Wise, you changed the resolution, remove all
Progressive Mode
TV input TV input
cannot use the BD Wise function. discs, and then press and hold the ^ Lets you improve picture quality when
1080p@60F button on the front of the player for
■■ For the proper operation of BD (Movie Frame : 1080p@60F 1080p@60F more than 5 seconds. All settings are viewing DVDs.
Wise, set the BD Wise menu of Off)
both the player and the TV to On. restored to the factory default. Access
Movie Frame : the Resolution function and reset the
1080p@24F 1080p@24F output resolution to a resolution that
Sound Settings
Auto (24Fs)
is compatible with your TV.
1080i 1080i 1080i
■■ When the factory default settings Digital Output
720p 720p 720p are restored, all stored user BD data
480p 480p 480p is deleted. Lets you select the digital audio output
■■ The Blu-ray Disc must have the 24 format that is suitable for your TV or AV
frame feature for the player to use Receiver. For more details, please refer
the Movie Frame (24Fs) mode. to the Digital Output Selection table on
the next page.
12
Digital Output Selection Blu-ray Discs may include three audio streams : PCM Downsampling
-- Main Feature Audio : The audio
Bitstream Bitstream
soundtrack of the main feature. Lets you choose to have 96KHz PCM
Setup PCM
Bitstream
(Re-encoded (Re-encoded -- BONUSVIEW audio : An additional signals downsampled to 48KHz
(Unprocessed) soundtrack such as the director or actor’s
DTS) Dolby D) before they are outputted to an
commentary.
HDMI HDMI supported amplifier. Choose On if your amplifier
Connection
HDMI
Coaxial
HDMI
Coaxial Receiver or AV receiver or -- Navigation Sound Effects : When you
Receiver Receiver
Coaxial Coaxial choose a menu navigation selection, a or receiver is not compatible with a
Navigation Sound Effect may sound. 96KHz signal.
Up to Re-encoded Re-encoded
PCM PCM 2ch PCM PCM 2ch Navigation Sound Effects are different
7.1ch DTS Dolby Digital * Dynamic Range Control
on each Blu-ray Disc.
Dolby Dolby Dolby Re-encoded Re-encoded
Digital
PCM 2ch PCM 2ch
Digital Digital DTS Dolby Digital * ✎✎ NOTES Lets you apply dynamic range control
■■ Be sure to select the correct Digital to Dolby Digital, Dolby Digital Plus,
Dolby Dolby Dolby Re-encoded Re-encoded
PCM 2ch PCM 2ch Output or you will hear no sound or
Digital Plus Digital Plus Digital DTS Dolby Digital * and Dolby TrueHD audio.
just loud noise.
Audio Dolby Dolby Dolby Re-encoded Re-encoded ●● Auto : Automatically controls the
PCM 2ch PCM 2ch ■■ If the HDMI device (AV receiver, TV)
Stream on TrueHD TrueHD Digital DTS Dolby Digital * dynamic range of Dolby TrueHD
is not compatible with compressed
Blu-ray Re-encoded Re-encoded formats (Dolby Digital, DTS), the audio, based on information in the
Disc DTS PCM 2ch PCM 2ch DTS DTS
DTS Dolby Digital * audio signal outputs as PCM. Dolby TrueHD soundtrack.
DTS-HD High DTS-HD High ■■ Regular DVDs do not have Also turns dynamic range control on
Re-encoded Re-encoded BONUSVIEW audio and Navigation
Resolution PCM 2ch PCM 2ch Resolution DTS for Dolby Digital and Dolby Digital Plus.
DTS Dolby Digital *
Audio Audio Sound Effects.
●● Off : Leaves the dynamic range
■■ Some Blu-ray Discs do not have
DTS-HD DTS-HD uncompressed, letting you hear the
Re-encoded Re-encoded BONUSVIEW audio and Navigation
Master PCM 2ch PCM 2ch Master DTS
DTS Dolby Digital * Sound Effects. original sound.
Audio Audio
■■ If you play MPEG audio soundtracks, ●● On : Turns dynamic range control

PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch the audio signal outputs as PCM on for all three Dolby formats.
Audio regardless of your Digital Output
Stream on Quieter sounds are made louder
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital selections (PCM or Bitstream).
DVD and the volume of loud sounds is
■■ If your TV is not compatible with
DTS PCM 2ch PCM 2ch DTS DTS DTS DTS reduced.
compressed multi-channel formats
Decodes main Decodes main (Dolby Digital, DTS), the player may
Outputs only main feature audio feature audio output PCM 2ch downmixed audio Downmixing Mode
Decodes main feature audio stream and BONUSVIEW and BONUSVIEW even though you selected Bitstream
Definition feature audio and so that your AV audio stream audio stream (either Re-encoded or Unprocessed) Lets you select the multi-channel
for BONUSVIEW audio receiver can decode together into PCM together into PCM in the setup menu. downmix method that is compatible
Any stream together the audio bitstream. audio and adds audio and adds
Blu-ray into PCM audio and You will not hear Navigation Sound Navigation Sound
■■ If your TV is not compatible with with your stereo system. You can choose
Disc adds Navigation BONUSVIEW audio Effects, then re- Effects, then re- PCM sampling rates over 48kHz, to have the player downmix to normal
Sound Effects. and Navigation encodes the PCM encodes the PCM the product will output at 48kHz stereo or to surround compatible stereo.
Sound Effects. audio into DTS audio into Dolby downsampled PCM audio even
bitstream Digital bitstream though you set PCM Downsampling
to Off.
** If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.

13
 Network Settings 222 Select Network, and then press Use the number keypad on your ĞĞ Wireless - Automatic
the v button. remote control to enter the
numbers for the parameter. Use 111 In the Home screen, select
When you connect this player to a 333 Select Network Settings, and then Settings, and then press the v
network, you can use network based press the v button. the ◀▶ buttons on the remote
control to move from entry field to button.
applications and functions such as BD- 444 Select Wired in the Network
entry field within a parameter. 222 Select Network, and then press
LIVE (see page 16), Netflix, Pandora, Settings screen, and then press
When done with one parameter, the v button.
and YouTube (see pages 23~25). You the v button.
can also use the network connection press the v button. 333 Select Network Settings, and then
555 Select the Connect button, and then press the v button.
to upgrade the player's software (see press the v button. The product 666 Press the ▲ or ▼ button to move to
page 18). Instructions for configuring detects the wired connection, another parameter, and then enter 444 Select Wireless in the Network
the network connection start below. verifies the network connection, the numbers for that parameter Settings screen, and then press
and then connects to the network. following the instructions in Step 5. the v button. The player
Configuring Your Network searches for and then displays a
777 Repeat Steps 5 and 6 until you
Connection ĞĞ Wired - Manual list of the available networks.
have filled in all parameters.
If you have a static IP address or
Before you begin, contact your ISP to find the Automatic procedure does not
✎✎ NOTE Network Settings

out if your IP address is static or dynamic. ■■ You can get the Network parameters Select your network type.
work, you'll need to set the Network from your Internet provider. Network type Wireless
If it is dynamic, and you have a wired or Settings values manually. Wireless network

wireless network, we recommend using 888 When finished entering all the Add Network You can connect your Blu-ray

Follow Steps 1 and 2 in Wired - player to the internet. Please

the Automatic configuration procedures parameters, press the RETURN or select which wireless network

Automatic, and then follow these to use.

described below. EXIT button. The player verifies

steps: WPS(PBC) Search

If you are connecting to a wired the network connection, and then

network, connect the player to your 111 Select Network Status. The player connects to the network.
m Move " Select ' Return

router using a LAN cable before you searches for a network, and then
start the configuration procedure. displays the connection failed Wireless Network 555 Select the desired network, and
If you are connecting to a wireless message. then press the v button.
222 On the bottom of the screen, You can setup a wireless network 666 On the Security screen, enter your
network, disconnect any wired
select IP Settings, and then press connection in four ways: network's Security Code or Pass
network connections before you begin.
To begin configuring your network the v button. -- Wireless Automatic Phrase.
connection, follow the steps The IP Settings screen appears. -- Wireless Manual Enter numbers directly using the
beginning below. 333 Select the IP Setting field, and -- WPS(PBC) number buttons on your remote
control. Enter letters by selecting
then press the v button. -- WPS(PIN)
Wired Network a letter with an arrow button, and
444 Select Enter manually in the IP When you configure the wireless then pressing v button.
Setting field, and then press the network connection, any wireless
ĞĞ Wired - Automatic v button. network devices currently connected 777 When finished, select Done and then
through the player or, if applicable, press the v button. The player
555 Select a parameter to enter (IP
111 In the Home screen, select Settings, the player's current wired connection, verifies the network connection and
Address, for example), and then
and then press the v button. will be disconnected. then connects to the network.
press the v button.

14
888 When verification is complete, When done with one parameter, 333 Select Network Settings, and then The player searches for and then
select OK, and then press the v press the v button. press the v button. displays a list of the available
button. 777 Press the ▲ or ▼ button to move to 444 Select Wireless in the Network networks.
Settings screen, and then press 555 Select the desired network, and
✎✎ NOTE another parameter, and then enter
the v button. then press the ▶ button.
■■ You should be able to find the the numbers for that parameter
Security Code or Pass Phrase on following the instructions in Step 6. 555 Press the ▲▼ button on your 666 Select the WPS(PIN), and then
one of the set up screens you used remote, and then press the ◀▶ press the v button. The PIN
888 Repeat Steps 6 and 7 until you
to set up your router or modem. button to select the WPS(PBC). pop-up appears.
have filled in all parameters.
666 Press the v button on your 777 Enter the PIN into the WPS PIN entry
ĞĞ Wireless - Manual
✎✎ NOTE remote. field in the router's Set Up screen
If you have a static IP address or ■■ You can get the Network parameters The "Press the PBC button" and then save the the screen.
the Automatic procedure does not from your Internet provider. message appears.
work, you'll need to set the Network 999 When finished, press the RETURN 777 Press the WPS(PBC) button on your
✎✎ NOTES
Settings values manually. or EXIT button. The Security
■■ Contact the manufacturer of the
router within two minutes. Your router for instructions explaining
111 Follow the directions in Wireless - Screen appears. player automatically acquires all the how to access the router's Set Up
Automatic through Step 5. 1111On the Security screen, enter your network settings values it needs screens or refer to the router's
network's Security Code or Pass and connects to your network. user's manual.
222 The player tries to connect to the
Phrase. Enter numbers directly using The Network Status screen For WPS connection, set your
network, and then displays the the number buttons on your remote
■■

connection failed message. appears. The player connects to wireless router’s security encryption
control. Enter letters by selecting a the network after the network to AES. WPS does not support WEP
333 On the bottom of the screen, letter with the ▲▼◀▶ buttons, and security encryption.
connection is verified.
select IP Settings, and then press then pressing the v button.
the v button. 1111When finished, select Done at the ĞĞ WPS(PIN) Network Test
The IP Settings screen appears. right of the screen, and then press
the v button. Before you begin, open the router's Use this menu item to check whether
444 Select the IP Setting field, and
The player verifies the network setup menu on your PC and access the your network connection is working
then press the v button.
connection and then connects to screen with the WPS PIN entry field. or not.
555 Select Enter manually in the IP
the network. 111 In the Home screen, select Settings,
Setting field, and then press the
1111After the player verifies the and then press the v button. Network Status
v button. network, select OK, and then 222 Select Network, and then press
666 Select a parameter to enter (IP press the v button. the v button. Use to check whether a connection to
Address, for example), and then a network and the Internet has been
ĞĞ WPS(PBC) 333 Select Network Settings, and then
press v button. Use the number established.
press the v button.
keypad on your remote control to 111 In the Home screen, select Settings,
enter the numbers for the parameter. 444 Select Wireless in the Network
and then press the v button.
Settings screen, and then press
Use the ◀▶ buttons on the remote 222 Select Network, and then press
the v button.
control to move from entry field to the v button.
entry field within a parameter.

15
Wi-Fi Direct Through the Wi-Fi Device 222 Select PIN, and then press the v ●● Prohibit : No Internet connection is
button. The PIN pop-up appears. allowed for any BD-LIVE content.
111 On the Wi-Fi device, follow the
The Wi-Fi Direct function allows you 333 Note the PIN code in the pop-
to connect Wi-Fi Direct devices to the
procedure on the device for
up, and then enter it into the ✎✎ NOTES
connecting to another Wi-Fi What is a valid certificate?
player and each other using a peer-to- Direct device. See the device's appropriate field in the Wi-Fi Direct ■■

When the player uses BD-LIVE to

peer network, without a wireless router. user manual for instructions. device you want to connect.
send the disc data and a request
222 When you have completed the 444 The Connecting pop-up appears,
✎✎ NOTES followed by the Connected pop-
to the server to certify the disc,
■■ Some Wi-Fi Direct devices may procedure, you should see a pop- the server uses the transmitted
not support the DLNA function if up on your TV screen saying that a up. When it closes, you should data to check if the disc is valid
connected via Wi-Fi Direct. If this is device that supports Wi-Fi Direct has see the device listed on the Wi-Fi and sends the certificate back to
the case, we recommend that you Direct screen as connected. the player.
requested to connect. Select OK, and
change the network connection The Internet connection may be
method you used to connect the
then press the v button to accept. ✎✎ NOTES ■■

restricted while you are using BD-

333 The Connecting pop-up appears, ■■ The current wired or wireless
devices. LIVE contents.
followed by the Connected pop- network connection will be
■■ Bluetooth transmissions can up. When it closes, you should disconnected when you use the
interfere with the Wi-Fi Direct Wi-Fi Direct function. Using BD-LIVE™
see the device listed on the Wi-Fi
signal. Before you use the Wi-
Fi Direct function, we strongly
Direct screen as connected. ■■ Text files, such as files with a .TXT
Once the player is connected to
or .DOC extension, do not display
recommend that you turn off the Through the Player Using PBC when you are using the Wi-Fi Direct the network, you can enjoy various
Bluetooth function of any active function. movie-related service content using a
mobile device. 111 Select the Wi-Fi Direct device you
BD-LIVE compliant disc.
want to connect to this player,
111 Turn on the Wi-Fi direct device and Device Name 111 Attach a USB memory stick to
and then press the v button.
activate its Wi-Fi Direct function. the USB jack on the front of
The PBC/PIN pop up appears.
222 In the Home screen, select The Device Name function allows the player, and then check its
Settings, and then press the v 222 Select PBC, and then press the v
you to change the player's name by remaining memory. The memory
button. button. The PBC pop-up appears.
selecting from a device name list. device must have at least 1GB of
333 Select Network, and then press 333 Press the PBC button on the Wi-Fi
Direct device within 2 minutes. free space to accommodate the
the v button. BD-Live Internet Connection BD-LIVE services.
444 Select Wi-Fi Direct, and then press 444 The Connecting pop-up appears,
followed by the Connected pop- 222 Insert a Blu-ray Disc that supports
the v button. Set to allow or prohibit an Internet
up. When it closes, you should BD-LIVE.
The Wi-Fi Direct devices that you connection when you use the BD-
can connect to the player appear. see the device listed on the Wi-Fi 333 Select an item from various BD-
LIVE service.
Direct screen as connected. LIVE service contents provided by
555 You have three ways to complete ●● Allow (All) : The Internet connection
the disc manufacturer.
the Wi-Fi connection: Through the Player Using a PIN is allowed for all BD-LIVE contents.
●● Through the Wi-Fi device.
111 Select the Wi-Fi Direct device you ●● Allow (Valid Only) : The Internet
✎✎ NOTE
●● Through the player using PBC. The way you use BD-LIVE and
want to connect to this player, connection is allowed only for BD-
■■

●● Through the player using a PIN. the provided contents may

and then press the v button. LIVE contents containing a valid differ, depending on the disc
Each is covered below. The PBC/PIN pop up appears. certificate. manufacturer.

16
The DLNA Function Quick Start ■■ If you have Anynet+ turned on, when ■■ The Resume Play function may not
you turn off the product or disconnect work after you format the storage
DLNA lets you play music, video, and and then reconnect the power cable, device.
When set to On, Quick Start lets the product turns on automatically to
photo files stored in your PC through the player start up more quickly by ■■ The total memory available to BD
re-establish the Anynet+ connection.
your Blu-ray player. Data Management may differ,
decreasing the boot time. After about 15 seconds, it turns off
depending on the conditions.
To use DLNA, you must install DLNA again automatically.
software or already have DLNA ✎✎ NOTE ■■ Some Samsung TVs, when
software installed on your PC and
■■ If this function is set to On, Standby connected to this product using the Language Settings
power consumption will be increased. Anynet+ function will, when you turn
connect the Blu-ray player to your PC them on, display a warning popup
via your network (see pages 14~15). message saying no connection has You can select the language you
Anynet+ (HDMI-CEC) been found. Never-the-less, the prefer for the On-Screen menu, disc
✎✎ NOTE Anynet+ connection is properly menu, audio, and subtitles.
■■ PCs running Windows 7 and Anynet+ is a convenient function that established and available to use.
Windows 8 have DLNA software offers linked operations with other ✎✎ NOTE
(Play To) built in. Samsung products that have the BD Data Management ■■ The selected language will only
For instructions explaining how to Anynet+ feature. appear if it is supported on the disc.
To operate this function, connect this Enables you to manage the
play content located on your PC, see downloaded contents you accessed
pages 20~23. player to an Anynet+ Samsung TV Security Settings
with an HDMI cable. through a Blu-ray disc that supports
With Anynet+ on, you can operate the BD-LIVE service and stored on a
flash drive. When you access this function for
System Settings this player using a Samsung TV remote
You can check the device’s the first time, the PIN screen appears.
control and start disc playback simply
information including the storage Enter the default PIN - 0000 - using
by pressing the PLAY ( ) button on
size, delete the BD data, or change the number buttons. To change the
Setup the TV’s remote control.
the Flash memory device. PIN, use the Change PIN function.
For more information, please see the
Each time you access the Security
By using the Setup function, you can set TV user manual.
the language, Network Settings, etc.
✎✎ NOTES Settings hereafter, you must enter that
For more information about the Setup
✎✎ NOTES ■■ In the external memory mode, four digit PIN. If you don’t change the
■■ This function is not available if the disc playback may be stopped if PIN, continue using the default PIN.
function, refer to the Setup section of you disconnect the USB device in
HDMI cable does not support CEC.
this user manual (See page 10). If your Samsung TV has an Anynet+ the middle of playback.
■■
BD Parental Rating
logo, then it supports the Anynet+ ■■ Your player supports the FAT16,
function. FAT32, and NTFS file systems. We Prevents playback of Blu-ray Discs
■■ Depending on your TV, certain HDMI recommend you use USB devices that
output resolutions may not work. with specific age ratings unless the 4
support the USB 2.0 protocol with 4
Please refer to the user manual of digit PIN is entered.
MB/sec or faster read/write speed.
your TV.

17
DVD Parental Rating If you forget your password By Online By USB

This function works in conjunction with 111 Remove any discs. To upgrade By Online, follow these To upgrade by USB, follow these steps:
DVDs that have been assigned an age steps: 111 Visit www.samsung.com. Select
rating or numeric rating that indicates 222 Press and hold the ^ button on the
111 Remove any discs from the Owners & Support > Manual &
the maturity level of the content. These front panel for 5 seconds or more.
player. Downloads. Then, follow the
numbers help you control the types of All settings will revert to their
factory settings. 222 In the player’s menu, go to directions on the screen.
DVDs that your family can watch.
Settings > Support > Software 222 Download the latest USB software
Select the rating level you want to ✎✎ NOTE Upgrade. upgrade zip archive to your
set. For example, if you select Level 6, When the factory default settings
■■
computer.
discs rated above 6 - Level 7 and 8 - are restored, all the user stored BD 333 Select By Online, and then press
will not play. 333 Unzip the zip archive to your
data is deleted. the v button. The Connecting
computer. You should have a
A larger number indicates more to Server message appears.
single RUF file with the same
mature content. General Settings 444 A popup message will appear if name as the zip file.
When the DVD Parental Rating function an update is available. 444 Copy the RUF file to a USB flash
is on, you must enter the 4 digit PIN to
Time Zone 555 If a download is available, select drive.
play discs with restricted rating levels.
Yes. The download and upgrade 555 Make sure there is no disc in the
Change PIN Lets you specify the time zone that is process starts. (Important: Never player, and then insert the USB
applicable to your area. turn the player off or on manually flash drive into the USB port of
Change the 4-digit password used to during an upgrade.) the player.
access security functions. 666 When the update is complete, the 666 In the player’s menu, go to
Support Settings
To change the PIN, follow these steps: player will restart automatically. Settings > Support > Software
Upgrade.
111 Select Change PIN, and then press Software Upgrade ✎✎ NOTES
the v button. The Enter old PIN ■■ The upgrade is complete when the 777 Select By USB.
screen appears. The Software Upgrade menu allows player turns off, and then turns on ✎✎ NOTES
222 Enter the old PIN. If you never you to upgrade the player’s software again by itself. ■■ No disc should be in the product
changed the PIN, enter the for performance improvements or ■■ Never turn the player off or back when you upgrade the software
default PIN: 0000. The Enter new additional services. on manually during the update using the USB Host jack.
PIN screen appears. process. ■■ When the software upgrade is
333 Enter the new PIN in the Enter ■■ Samsung Electronics takes no done, check the software details in
new PIN field. legal responsibility for any product the software Upgrade menu.
444 Re-enter the new PIN in the malfunction caused by an unstable ■■ Do not turn off the player during
Internet connection or consumer the software upgrade. It may cause
Confirm new PIN field. The "PIN
negligence during a software upgrade. the player to malfunction.
is changed successfully." message
appears. ■■ No disc should be in the product ■■ Software upgrades using the USB
when you upgrade the software By Host jack must be performed with a
555 Press the v button. Online. USB flash memory stick only.

18
 ✎✎ NOTES
Auto Upgrade Notification
■■ The upgrade is complete when the Media Play
If you have connected the player to player turns off, and then turns on
your network, and then set Auto again by itself. Playing a Commercially ✎✎ NOTE
Upgrade Notification on, the player Never turn the player off or on ■■ If the pop-up does not appear, go
■■
Recorded Disc
automatically notifies you when a manually during the update process. to Method 2.
new software version is available for Samsung Electronics takes no legal
■■
333 Use the ▲▼ buttons to select
the player. responsibility for player malfunction 111 Press the 8 button to open the
Photos, Videos, or Music, and then
To set Auto Upgrade Notification on, caused by an unstable Internet disc tray.
connection or consumer negligence press the v button. The Photos,
follow these steps: 222 Place a disc gently into the disc Videos & Music screen appears
during software upgrade.
111 Select Auto Upgrade Notification, tray with the disc's label facing up. listing the content of the device.
and then press the v button. Contact Samsung 333 Press the 8 button to close Depending on how the contents
the disc tray. Playback starts are arranged, you will see either
222 Use the ▲▼ buttons to select On,
Provides contact information for automatically. folders, individual files, or both.
and then press the v button.
assistance with your player. ✎✎ NOTE
If there is a new software version
Playing Files on a USB Device
available, the player notifies you with ■■ Even though the player will display
Terms of Service Agreement folders for all content types, it will
a popup message.
There are two methods you can only display files of the Content
111 To upgrade the firmware, remove Lets you view the general disclaimer use to play or view multimedia files Type you selected in Step 3. For
any discs from the player. regarding third party contents and located on a USB device. example, if you selected music, you
services. will only be able to see music files.
222 Select Yes in the Pop-up. The You can change this selection by
player turns off automatically, Method 1
Reset returning to the Photos, Videos &
then restarts, and begins the Music screen and going to Step 3 in
download. (Never turn the player 111 Turn the player on. Method 2 below.
Returns all settings to their factory
on or off manually during an 222 Connect the USB device to the 444 If necessary, use the ▲▼◀▶
defaults except for the network
upgrade.) USB port on the front panel buttons to select a folder, and
settings. of the player. The New Device
333 The update progress popup then press the v button.
Connected pop-up appears.
appears. 555 Select a file to view or play, and
then press the v button.
444 When the update is complete, the Play Disc Photos Videos Music

player will restart automatically. 666 Press the RETURN button to exit a
New device connected.
123
folder or the EXIT button to return
Photos to the Home screen.
Videos
No Disc
Music 777 Go to pages 21~23 for
> Move " Enter ' Return instructions that explain how to
App 1 App 2 App 3 App 4 App 5 More Change Device Settings
control playback of videos, music,
and pictures on a USB device.

19
Method 2 444 If necessary, use the ▲▼◀▶ ✎✎ NOTE Using DLNA
buttons to select a folder, and ■■ Even though the player will display
111 Turn the player on. then press the v button. folders for all content types, it will
PC Blu-ray Disc Player
222 Connect the USB device to the only display files of the Content
555 Use the ▲▼◀▶ buttons to select
USB port on the front panel of Type you selected in Step 2. For
a file to view or play, and then example, if you selected music, you
the player. Select Change Device press the v button. will only be able to see music files. Play back PC's
and then press the ▲▼ button to You can change this selection by
files
666 Press the RETURN button to exit a
select USB. Press the v button. returning to the Home screen and
folder or the EXIT button to return DLNA Connection

to Home screen. repeating Step 2.

Play Disc Photos Videos Music
Change Device
777 Go to pages 21~23 for 333 A screen appears listing the 111 Connect the Blu-ray Disc Player,
No Disc
instructions that explain how to contents of the disc. Depending your PC, and/or your DLNA
123
a control playback of videos, music, on how the contents are compatible device to the same
No Disc
and pictures on a USB device. arranged, you will see either wireless network.
folders, individual files, or both. 222 Follow the directions in the DLNA
✎✎ NOTE software Installation/Instruction
App 1 App 2 App 3 App 4 App 5 More
Close
Change Device Settings
If you insert a disc when playing
444 If necessary, use the ▲▼◀▶
manual to set up devices and files
■■

a USB device, the device mode buttons to select a folder, and

then press the v button. for playing or viewing.
changes to "Disc" automatically.
333 Use the ▲▼◀▶ buttons to select 333 Select Change Device on the
Photos, Videos, or Music on 555 Use the ▲▼◀▶ buttons to select
a file to view or play, and then player's Home screen, and then
the Home screen, and then press Playing a Disc with User press the v button. In the list
the v button. The Photos, press the v button.
Recorded Content of DLNA connected devices that
Videos & Music screen appears 666 Press the RETURN button one appears, select your PC or other
listing the content of the device. or more times to exit a current DLNA compatible device, and
Depending on how the contents You can play multimedia files you
screen, exit a folder, or to return then press the v button.
are arranged, you will see either have recorded on Blu-ray, DVD, or CD
to the Home screen. Press the
discs. 444 Use the ◀▶ buttons to select the
folders, individual files, or both. EXIT button to return directly to
type of content you want to view or
111 Place a user recorded disc into the Home Screen.
✎✎ NOTE play - Videos, Photos, or Music -
■■ Even though the player will display the disc tray with the disc’s label 777 Go to pages 21~23 for and then press the v button.
folders for all content types, it will facing up, and then close the tray. instructions that explain how to
only display files of the Content 222 Use the ◀▶ buttons to select the control playback of videos, music, ✎✎ NOTE
Type you selected in Step 3. For and pictures on a disc. ■■ Even though the player will display
example, if you selected music, you
type of content you want to view folders for all content types, it will
will only be able to see music files. or play - Videos, Photos, or only display files of the Content
You can change this selection by Music - and then press the v Type you selected in Step 4. For
returning to the Photos, Videos & button. example, if you selected music, you
Music screen and repeating Step 3. will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 4.

20
555 A screen appears listing the Controlling Video Playback In pause mode, press the Controlling Music Playback
contents of the PC or DLNA 4 button. Each time
device. Depending on how the Slow Motion
You can control the playback of you press the 4 button, You can control the playback of music
Play
contents are arranged, you will video content located on a Blu-ray the playback speed will located on a Blu-ray disc, DVD, CD,
see either folders, individual files, disc, DVD, CD, USB device, or your change. USB device, or your computer.
or both. computer. Depending on the media, In pause mode, press the
666 If necessary, use the ▲▼◀▶ some of the functions described in 7 button. Buttons on the Remote Control
Step Motion
buttons to select a folder, and this manual may not be available. Play
Each time you press the used for Music Playback
then press the v button. 7 button, a new frame
During Blu-ray or DVD disc playback, appears.
777 Use the ▲▼◀▶ buttons to select the Full screen button does not operate.
a file to view or play, and then During playback, press the
press the v button. Buttons on the Remote Control 1 or 2 button. 1
used for Video Playback Skip Motion Each time you press the
888 Press the RETURN button one Play 1 or 2 button, the disc
or more times to exit a current moves to the previous or
screen, exit a folder, or to return 2 next chapter or file. 4
to the Home screen. Press the
2
EXIT button to return directly to Using the disc menu, title 5
the Home Screen.
1 menu, popup menu, and 3 6
999 Go to pages 21~23 for title list
instructions that explain how to NUMBER buttons (Audio CD (CD-
control playback of videos, music, During playback, press DA) only) : During Playlist playback,
DISC MENU 1
and pictures on a disc. this button to display the press the desired track number.
button The selected track is played.
Playback related buttons Disc menu.
Skip : During playback, press the
The player does not play sound in During playback, press
TITLE MENU 2 1 or 2 button to move to the
Search, Slow, or Step mode. this button to display the BONUS REPEAT REPEAT FULL
button previous
VIEW
orA-Bnext file of the playlist.
SCREEN
●● To return to normal speed playback,
Title menu.
press the 6 button. 3 5 button : Stops a track.
During playback, press
POPUP MENU Fast Play (Audio CD (CD-DA) only)
BONUS REPEAT REPEAT FULL
this button to display
6 button VIEW A-B
Starts SCREEN
playback. button
the Pop-up menu. During playback, press the 3 or
5 button Stops playback. 4 4 button.
Each time you press the 3 or 4
7 button Pauses playback. button, the playback speed will
During playback, press the change.
3 or 4 button. 5 Pause : Pauses a track.
Fast Motion
Each time you press the 3
Play 6 button : Plays the currently
or 4 button, the playback 6
speed will change. selected track.

21
Repeat an Audio CD (CD-DA)/ Playlist ✎✎ NOTES 555 Use the ▲▼ buttons to select the
MP3 ■■ You can create a playlist with up to device to store the ripped files to,
111 To move to the Music List, press 99 tracks on Audio CDs (CD-DA). and then press the v button.
111 During Playlist playback, press the the 5 or RETURN button. ■■ If you remove all the tracks from
a play list and then press the v
✎✎ NOTE
TOOLS button. The Music List screen appears. ■■ Do not disconnect the device while
button, the player lists and plays all
Playlist 1/2 Page the tracks on the disc. ripping is in progress.
1/6 Music TRACK 001
Tools
TRACK 001
666 If you want to cancel ripping,
TRACK 001
Repeat Mode ? Off \
05:57 TRACK 001
TRACK 002
Rip TRACK 002
04:27
> Move < Adjust ' Return
02:38

TRACK 003
02:38
TRACK 004
Ripping press the v button, and then
TRACK 003 02:38 02:38
04:07 TRACK 005 TRACK 006 select Yes. Select No to continue
+ 00:08 / 05:57
TRACK 004
03:41
02:38

TRACK 007
02:38

TRACK 008
Lets you copy audio files from an ripping.
TRACK 005
03:17
02:38 02:38
Audio CD (CD-DA) to a USB/HDD
TRACK 006
03:35
TRACK 009
02:38
TRACK 010
02:38
device. 777 When ripping is complete, the
CD " Pause c Select Tools ' Return CD a Change Device c Select Tools ( ) Jump Page ' Return "Ripping is completed." message
111 Open the disc tray. Place the appears. Press the v button to
222 Press the ▲▼◀▶ buttons to audio (CD-DA) disc on the tray, go back to the Playback screen.
222 Press the ◀▶ buttons to select and close the tray. Insert a USB
move to a desired track, and then
device into the USB jack on the ✎✎ NOTES
Track, All, Shuffle, or Off. press the YELLOW (C) button. A
front of the product.
■■ This function may not be
333 Press the v button. check appears on the track. supported by some discs.
Repeat this procedure to select 222 In Stop mode, press the ▲▼◀▶ ■■ On the Ripping screen, you can
Songs are played in
additional tracks. buttons to move to a desired also choose Select All and Deselect
Off the order in which 333 To remove a track from the list, track, and then press the YELLOW All.
they were recorded. move to the track, and then press (C) button. A check appears on -- Use Select All to select all tracks.
the YELLOW (C) button again. the track. This cancels your individual track
The current song is
( ) Track The check on the track is cancelled. Repeat this procedure to select selections.
repeated.
444 When done, press the v button. additional tracks. -- Use Deselect All to deselect all
( ) All All songs are repeated. The tracks you selected are selected tracks at once.
333 To remove a track from the list,
displayed on the right side of the
Shuffle plays songs in move to the track, and then press
( ) Shuffle screen. The player plays the first
random order. the YELLOW (C) button again.
track.
The check on the track is
555 To change the play list, press the
cancelled.
5 button or RETURN button to
return to the Music List. Repeat 444 When done, press the TOOLS
Steps 2, 3, and 4. button, and then select Rip using
666 To cancel the play list and return the ▲▼ buttons, and then press
to the Home screen, press the the v button. The Rip pop-up
RETURN or EXIT button. appears.

22
Disc Copy to USB 555 Repeat Step 4 to select and check Playing Photo Contents However, the sound quality can be
additional files. affected by the bit rate of the MP3
file, the size of the photo, and the
Lets you copy video/photo/music 666 To remove a file from the list, You can control the playback of encoding method.
contents from a data disc to a move to the file, and then press photo content located on a Blu-ray ■■ You can't enlarge the subtitle and
USB/HDD device. the YELLOW (C) button again. disc, DVD, CD, USB device, or your PG graphic in the full screen mode.
111 Open the disc tray. Place the data The check on the file is removed. computer.
disc on the tray, and close the tray. 777 When done, press the TOOLS
button. Select Copy to USB using Using the Tools Menu Using Netflix
Insert a USB device into the USB
jack on the front of the product. the ▲▼ buttons, and then press
the v button. The Copy to USB During playback, press the TOOLS You can use your Blu-ray player to
The new device pop-up appears. button.
pop-up appears. stream movies, TV shows, and other
222 Press the ▲ button, and then
888 Use the ▲▼ buttons to select the Start Slide Show/ Select to start or stop
video content from Netflix. To stream
press the ◀▶ to select Blu-ray,
device to store the copied files on, Stop Slide Show the slide show. content from Netflix, you must
DVD or CD.
and then press the v button. connect your Blu-ray player to your
333 Use the ▲▼ buttons to select Slide Show Select to set a slide network. (See page 9.)
Photos, Videos, or Music, and then ✎✎ NOTE Speed show's speed.
press the v button. The Photos, ■■ Do not disconnect the device while Starting Netflix for the First Time
Select to listen to music
Videos & Music screen appears copying is in progress. Background
while viewing a slide
listing the content of the device. Music 111 On the Home screen, select Netflix
999 If you want to cancel copying, show.
Depending on how the contents press the v button and then and then press the v button.
Select to enlarge
are arranged, you will see either select Yes. Select No to continue ✎✎ NOTE
Zoom the current picture.
folders, individual files, or both. copying. (Enlarge up to 4 times) ■■ If this is the first time you start any of
✎✎ NOTE 1111When copying is complete, the Select to rotate the
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
■■ Even though the player will display "Copying is completed." message picture. (This will rotate will be asked to read and agree to the
folders for all content types, it will appears. Press the v button to Rotate the picture either Terms of Service Agreement and the
only display files of the Content go back to the Playback screen. clockwise or counter Samsung Service Privacy Policy. You
Type you selected in Step 3. For clockwise.) must agree to both to continue. After
example, if you selected music, you ✎✎ NOTES you have agreed to both, go to Step 2.
will only be able to see music files. This function may not be Shows the picture
■■
Information
You can change this selection by supported by some discs. information. 222 If you already have a Netflix account,
returning to the Photos, Videos & select Sign In, press the v button,
Music screen and repeating Step 3. ■■ On the Copying screen, you can
also choose Select All and Deselect
✎✎ NOTES and then go to Step 6. If not, go to
444 In Stop mode, use the ▲▼◀▶ All.
■■ Depending on the disc or storage Step 3.
device, the Tools menu may differ. 333 Enter your e-mail address by
buttons to select a file you want -- Use Select All to select all item.
to copy, and then press the This cancels your individual item ■■ To enable the background music selecting character, number, or
YELLOW (C) button. A check selections. function, the photo file must be symbol keys on the screen using
-- Use Deselect All to deselect all
appears to the left of the file. in the same storage media as the the ▲▼◀▶ buttons, and then
music file. pressing the v button.
selected item at once.

23
444 When done, move the cursor to 222 Using the ▲▼◀▶ buttons, select ✎✎ NOTE Using YouTube
Next at the bottom of the screen, a letter or number, and then press ■■ If this is the first time you start any of
and then press the v button. the v button. The character you the apps at the bottom of the screen You can use your Blu-ray player to
555 Repeat the same process for the selected appears at the top of the (Netflix, Pandora, or YouTube), you
stream video content from YouTube.
Password field. field on the right. will be asked to read and agree to the
Terms of Service Agreement and the To stream content from YouTube, you
666 After you have entered your 333 Repeat Step 2 to select more Samsung Service Privacy Policy. You must connect your Blu-ray player to
password, select Next at the letters or numbers. must agree to both to continue. After your network. (See page 9.)
bottom of the screen, and then 444 As you add more letters, Netflix you have agreed to both, go to Step 2.
press the v button. will start to display matches in the Starting YouTube for the First
222 On the Pandora welcome screen,
field on the right. if you have a Pandora account Time
✎✎ NOTES 555 To move to the list of matches, press select "I have a Pandora account",
■■ To return to the previous page, the ▶ button one or more times. 111 On the Home screen, select
and then press the v button.
press the Return button on your
666 To select a movie or video, highlight Go to Step 3. If you do not have a YouTube, and then press the v
remote.
it and then press the v button. Pandora account select "I am new button.
■■ To exit Netflix, press the Exit button
to Pandora" and then press the
on your remote.
✎✎ NOTE v button. Go to Step 6.
✎✎ NOTE
Select the Delete button (with an ■■ If this is the first time you start any of
■■
333 Enter your e-mail address and
Selecting a Movie or Video X) at the top of the screen to delete the apps at the bottom of the screen
password. Use the ▲▼◀▶ (Netflix, Pandora, or YouTube), you
the last character you entered.
Movies and videos on Netflix are buttons to select a character, and will be asked to read and agree to
displayed in rows by category. To scroll then press the v button. the Terms of Service Agreement and
Using Pandora 444 Repeat Step 3 to enter all the the Samsung Service Privacy Policy.
through a row, use the ◀▶ buttons.
characters in your e-mail address You must agree to both to continue.
To move up or down, from one row After you have agreed to both, go
You can use your Blu-ray player to and password.
to another, use the ▲▼ buttons. To to Step 2.
stream music from Pandora, free of 555 When done, select Sign In at the
select a movie or video, highlight it,
charge. To stream music from Pandora, bottom of the screen, and then 222 On the YouTube screen, use the
and then press the v button.
you must connect your Blu-ray player press the v button. ▲▼ buttons, to select Popular
You can also search for movies and to your network. (See page 9.)
videos by keywords - title, director’s 666 If you do not have a Pandora on YouTube, Search, or Sign In
name, actor’s name, etc. Starting Pandora for the First account, follow the directions on & Settings, and then press the
the Pandora screen to create a v button.
To search, follow these steps: Time Pandora account.
111 Select the Search field at the top Popular on YouTube displays the
of the movie/video list screen, and 111 On the Home screen, select Pandora, currently Popular on YouTube
then press the v button. and then press the v button. videos by category and lets you
select a category.
Search lets you search for videos
using key words or names.

24
 Sign In & Settings lets you access Finding and Selecting Other 333 Press the ▼ button again. 666 To select a video, use the ▲▼◀▶
your YouTube account and send Videos The Current Play List appears buttons to highlight it, and then
videos from your tablet or smart displaying individual videos in the press the v button. YouTube
phone to your TV. Current Play List. plays the video.
Related Videos
444 Use the ◀▶ buttons to select
a video, and then press the v
✎✎ NOTES
Playing and Controlling Videos 111 With a video running and the ■■ Select Clear at the top of the
button.
Control Panel displayed, press the screen to clear all entered
The first video stops and the video characters.
111 To begin, select either Popular on ▼ button once. The Information
you selected plays.
YouTube, and then press the v screen appears. ■■ Select the Delete button (with an :)
555 If you do not find a video you at the top of the screen to delete
button. 222 In the Information screen, press the last character you entered.
the ▼ button once. The Related want, press the Return or ▲
222 Use the ◀▶ buttons to select button to return to previous
Videos category appears displaying
a category you want, and then screens. Sign In & Settings
individual related videos.
press the v button. YouTube
automatically starts the first video 333 Use the ◀▶ buttons to select Sign In & Settings lets you access your
a video, and then press the v Using Search
in that category. YouTube account and send videos
button. The first video stops and from your tablet or smart phone to
333 After the video starts, press the the video you selected plays. 111 On the YouTube Home screen,
v button. The Control Panel select Search, and then press the your TV.
444 If you do not find a video you want,
appears. v button.
press the Return or ▲ button to Using Sign In & Settings
On the Control Panel you can
return to previous screens. 222 On the Search screen, use the ◀▶
Pause, Rewind, Fast Forward, and To use Sign In & Settings, follow these
buttons to select a character, and
perform other operations on the steps;
Current Play List Videos then press the v button. The
running video by using the ◀▶
character you selected appears in
buttons on your remote to select 111 On the YouTube Home page,
111 With a video running and the the field at the top.
the appropriate button on the select Sign In & Settings, and
Control Panel, and then pressing Control Panel displayed, press the 333 Repeat Step 2 to select more then press the v button.
the v button on the remote. ▼ button once. The Information letters or numbers.
222 On the Sign In & Settings page,
screen appears. 444 As you add more characters, use the ◀▶buttons to select
222 In the Information screen, press YouTube will start to display either Sign In or Pair, and then
the ▼ button once. The Related matches in the field on the right. press the v button.
Videos category appears displaying This may take some time.
333 Follow the directions on the
individual related videos. 555 To move to the list of matches, screen.
press the ▶ button one or more
times.

25
Appendix PROBLEM

If you experience other ~~

SOLUTION

Go to the table of contents and find the section of the user

manual that contains information about the feature you are having
Troubleshooting problems.
the problem with, and then follow the procedure again.
~~ If you still cannot resolve the problem, please contact Samsung
Before requesting service, please try the following solutions. Customer Support at the phone number listed on the last page of
this manual.
PROBLEM SOLUTION DLNA function
I can see folders shared through ~~ DLNA only shows Video, Photo, and Music files. Other types of
No operation can be performed ~~ Check the batteries in the remote control. They may need replacing.
DLNA, but I cannot see the files. files are not displayed.
with the remote control. ~~ Operate the remote control at a distance of no more than 20 feet from the player.
~~ Remove the batteries, and then hold down one or more buttons for Video is played intermittently. ~~ Check if the network is stable.
several minutes to drain the microprocessor inside the remote control to ~~ Check if the network cable is properly connected and if the network is overloaded.
reset it. Reinstall the batteries and try to operate the remote control again. ~~ The wireless connection between the DLNA compatible device and
the player is unstable. Check the connection.
The disc does not play. ~~ Ensure that the disc is installed with the label side facing up.
~~ Check the region number of the Blu-ray Disc/DVD. The DLNA connection between ~~ IP addresses within the same subnetwork should be unique. If they
the Player and PC is unstable. are not, IP interference can cause this phenomenon.
The Disc Menu does not appear. ~~ Ensure that the disc has disc menus. ~~ Check if you have a firewall enabled. If so, disable the firewall function.
The prohibition message ~~ This message appears when an invalid button is pressed. BD-LIVE
appears on the screen. ~~ The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
~~ You’ve requested a title or chapter number or search time that is out of range. I cannot connect to the BD-LIVE ~~ Check whether the network connection is working or not by
server. accessing Network Status in Network Settings (Settings > Network
Play mode differs from the ~~ Some of the functions selected in the Setup Menu may not work Settings > Network Status).
Setup Menu selection. properly if those functions are not encoded on the disc. ~~ Check whether the USB memory device is connected to the player.
~~ The memory device must have at least 1GB of free space to
You cannot change the screen ~~ The Screen Ratio on your Blu-ray Disc/DVD Disc is fixed and cannot accommodate the BD-LIVE service.
aspect ratio (screen size). be changed. You can check the available size in BD Data Management.
~~ This is not a problem with the player. ~~ Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
~~ If all above fails, contact the content provider or update the player
No audio. ~~ Make sure you have selected the correct Digital Output in the
to the latest firmware.
Audio Options Menu.
When using the BD-LIVE ~~ The memory device must have at least 1GB of free space to
The screen is blank. ~~ If the HDMI output is set to a resolution your TV cannot support (for
service, an error occurs. accommodate the BD-LIVE service.
example, 1080p), you may not see a picture on your TV.
You can check the available size in BD Data Management.
~~ Press the ^ button (on the front panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
~~ When the factory default settings are restored, all stored user BD data is ✎✎ NOTES
deleted. ■■ When the factory default settings are restored, all stored user BD data is deleted.
Forgot password ~~ Press the ^ button (on the front panel) for more than 5 seconds
with no disc inside. All settings including the password will revert Repairs
to the factory settings.
Don’t use this unless absolutely necessary.
If you contact us to repair your player, an administration fee may be charged if either:
~~ When the factory default settings are restored, all stored user BD data is deleted.
111 An engineer is called out to your home at your request and there is no defect in the product.
The picture is noisy or distorted ~~ Make sure that the disc is not dirty or scratched.
222 You bring the unit to a repair center and there is no defect in the product.
~~ Clean the disc.
We will provide you with the amount of the administration fee before we make a home visit or
No HDMI output. ~~ Check the connection between the TV and the HDMI jack of the player.
begin any work on your player.
~~ Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input resolutions. We recommend you read this manual thoroughly, search for a solution on line at
Abnormal HDMI output screen. ~~ If random noise appears on the screen, it means that TV does not www.samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before
support HDCP (High-bandwidth Digital Content Protection). seeking to repair your player.

26
 Specifications Compliance and Compatibility Notice
NOT ALL discs are compatible
Power Requirements AC110-120V 50/60Hz ●● Subject to the restrictions described below and those noted throughout this Manual,

including the Disc Type and Characteristics section of this user manual, disc types that can
Power Consumption 10.8W be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
Weight 2.2 Ibs
●● Discs other than those listed above cannot be and are not intended to be played by this player.
General
Dimensions 11.4 (W) X 8.7 (D) X 1.5 (H) inches Some of the discs listed above may not play due to one or more reasons provided below.
●● Samsung cannot guarantee that this player will play every disc bearing the BD-ROM, BD-
Operating Temperature Range +41°F to +95°F RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may
not respond to all operating commands or operate all features of every disc. These and
Operating Humidity Range 10 % to 75 %
other disc compatibility and player operation issues with new and existing format discs are
Type A USB 2.0 possible because:
USB -- Blu-ray is a new and evolving format. This player may not operate all Blu-ray features
DC output 5V 0.5A Max. because 1.) some features may be optional, 2.) additional features may have been added
to the Blu-ray Disc format after the production of this player, and 3.) certain features may
Video 1080p, 1080i, 720p, 480p be subject to delayed availability;
HDMI
-- not all new and existing disc format versions are supported by this player;
Audio PCM, Bitstream
-- new and existing disc formats may be revised, changed, updated, improved and/or
Audio Output Digital Audio Output Coaxial supplemented;
-- some discs are produced in a manner that allows specific or limited operation or restricts
Ethernet 100BASE - TX Terminal features during playback;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
Wireless LAN Built-In CD-RW/-R logos may still be non-standardized discs;
Network WEP (OPEN/SHARED) -- some discs may not be played depending on their physical state or recording conditions;
Security WPA-PSK (TKIP/AES) -- problems and errors can occur during the creation of Blu-ray Disc or DVD software
WPA2-PSK (TKIP/AES) and/or the manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment;
WPS(PBC) Supported and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and
-- Network speeds equal to or below 10Mbps are not supported. posted by SAMSUNG customer care center.
-- Design and specifications are subject to change without prior notice. ●● If you encounter disc compatibility or player operation problems, please contact the

-- Weight and dimensions are approximate. SAMSUNG customer care center.

You may also contact the SAMSUNG customer care center for possible updates to this player.
-- Dispose unwanted electronics through an approved recycler.
●● For additional information on playback restrictions and disc compatibility, refer to the
To find the nearest recycling location, go to our website: www.samsung.com/ following sections of this users' manual : Precautions, Before reading the user manual, Disc
recyclingdirect or call, (877) 278 - 0799 Types and Characteristics, and Before Playing.
●● For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT

NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.

27
Copy Protection WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES
●● Because AACS (Advanced Access Content System) is approved as the content protection ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
DVD format, certain restrictions are imposed on playback, analog signal output, etc., of ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
AACS protected contents. Third party services may be terminated or interrupted at any time, and Samsung makes no
The operation of this product and restrictions on this product may vary depending on your
representation or warranty that any content or service will remain available for any period
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as of time. Content and services are transmitted by third parties by means of networks and
content protection systems for the Blu-ray Disc format, which imposes certain restrictions transmission facilities over which Samsung has no control. Without limiting the generality of
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact suspension of any content or service made available through this device.
SAMSUNG customer care center. Samsung is neither responsible nor liable for customer service related to the content and
●● Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should services. Any question or request for service relating to the content or services should be made
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a directly to the respective content and service providers.
distorted picture from copy-protected Blu-ray Disc/DVDs.
●● Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized License
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability. ●● Manufactured under license from Dolby Laboratories. Dolby and the
●● Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies double-D symbol are trademarks of Dolby Laboratories.
of some commercially-produced film and videos and their soundtracks. When a prohibited
use of an unauthorized copy is detected, a message will be displayed and playback or
copying will be interrupted. More information about Cinavia technology is provided at
the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request ●● For DTS patents, see http://patents.dts.com. Manufactured under license
additional information about Cinavia by mail, send a postcard with your mailing address to: from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA. together are registered trademarks, and DTS 2.0+Digital Out is a trademark
This product incorporates proprietary technology under licence from Verance Corporation of DTS, Inc. © DTS, Inc. All Rights Reserved.
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued 2.0+Digital Out
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance ●● The terms HDMI and HDMI High-Definition Multimedia Interface,
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited. and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Network Service Disclaimer
●● Oracle and Java are registered trademarks of Oracle and/or its affiliates.
All content and services accessible through this device belong to third parties and are protected Other names may be trademarks of their respective owners
by copyright, patent, trademark and/or other intellectual property laws. Such content and
services are provided solely for your personal noncommercial use. You may not use any content
or services in a manner that has not been authorized by the content owner or service provider.
Without limiting the foregoing, unless expressly authorized by the applicable content owner
or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, ●● Open Source License Notice
create derivative works, exploit, or distribute in any manner or medium any content or services
-- In the case of using open source software, Open Source Licenses are available on the
displayed through this device.
product menu.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY ●● Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ●● DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,
SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR
service marks, or certification marks of the Digital Living Network
COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE
Alliance.
AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE,
 LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the
purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product
to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license
agreement. Non-SAMSUNG hardware and software products, if provided, are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement,
noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses
for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature;
use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by
SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating
instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and
distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON
SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact the SAMSUNG customer care center.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller.
THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES
WHERE SUCH RESTRICTION MAY BE PROHIBITED.
For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/authorized_resellers.html.
QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT WRITE

Samsung Electronics America, Inc.

1-800-SAMSUNG
IN THE US www.samsung.com/us/support 85 Challenger Road
(726-7864)
Ridgefield Park, NJ 07660

© 2014 Samsung Electronics Co.,Ltd. All rights reserved