SG125HX

Multi-MPPT String Inverter for 1500 Vdc System

NEW

HIGH YIELD SMART O&M

6 MPPTs with max. efficiency 99% Touch free commissioning and remote
Compatible with bifacial module firmware upgrade
Built-in anti-PID and PID recovery function Smart IV curve diagnosis *
Fuse free design with smart string current
monitoring

SAVED INVESTMENT PROVEN SAFETY

Compatible with Al and Cu AC cables IP66 and C5 protection
DC 2 in 1 connection enabled DC type II SPD and AC type II SPD
Power line communication (PLC) Compliant with global safety and grid code

CIRCUIT DIAGRAM

MPPT
DC1
(Boost1)
L1
DC EMI AC AC AC EMI
Filter L2
Filter Relays Filter
MPPT L3
DC6 (Boost6)

Current DC Switch DC SPD DC Bus Inverter Circuit AC SPD PE

Monitoring
(DC/AC)

© 2021 Sungrow Power Supply Co., Ltd. All rights reserved. Subject to change without notice. Version 1.1.4
 Type designation SG125HX
Input (DC)
Max. PV input voltage 1500 V
Min. PV input voltage / Start-up input voltage 500 V / 550 V
Nominal PV input voltage 1160 V
MPP voltage range 500 V – 1500 V
MPP voltage range for nominal power 860 V – 1300 V
No. of independent MPP inputs 6
Max. number of input connector per MPPT 2
Max. PV input current per MPPT 30 A
Max. DC short-circuit current per MPPT 50 A
Output (AC)
AC output power 125kVA @ 40 ℃ / 113.6kVA @ 50 ℃
Max. AC output current 90.2 A
Nominal AC voltage 3 / PE, 800 V
AC voltage range 680 – 880 V
Nominal grid frequency / Grid frequency range 50 Hz / 45 – 55 Hz, 60 Hz / 55 – 65 Hz
Harmonic (THD) < 3 % (at nominal power)
Power factor at nominal power / Adjustable power factor > 0.99 / 0.8 leading – 0.8 lagging
Feed-in phases / AC connection 3/3
Efficiency
Max. efficiency / European efficiency 99.0 % / 98.7 %
Protection
DC reverse connection protection Yes
AC short circuit protection Yes
Leakage current protection Yes
Grid monitoring Yes
DC switch Yes
AC switch No
PV String current monitoring Yes
Q at night Yes
PID protection Anti-PID and PID recovery
Surge protection DC Type II / AC Type II
General Data
Dimensions (W*H*D) 916*690*340 mm
Weight 75 kg
Isolation method Transformerless
Degree of protection IP66
Power consumption at night <7W
Operating ambient temperature range -30 to 60 ℃
Allowable relative humidity range (non-condensing) 0 – 100 %
Cooling method Smart forced air cooling
Max. operating altitude 5000 m (> 4000 m derating)
Display LED, Bluetooth+APP
Communication RS485 / PLC*
DC connection type H4 PLUS (Max. 6 mm², optional 10 mm²)
AC connection type Support OT/DT terminal (Max. 120 mm²)
IEC 62109, IEC 61727, IEC 62116, IEC 60068, IEC 61683,
Compliance
IEC 61000-6-2, IEC 61000-6-4
Q at night function, LVRT, HVRT,active & reactive power control and
Grid Support
power ramp rate control

*: Optional. Only compatible with Sungrow Logger, EyeM4 and iSolarCloud

© 2021 Sungrow Power Supply Co., Ltd. All rights reserved. Subject to change without notice. Version 1.1.4