Scribd
Upload
23 views40 pages

Terace Structural Computation

The document outlines the structural computation and design analysis for a proposed two-storey residential project, detailing codes, design loads, material stresses, and seismic load reports. It includes specific calculations for dead and live loads, as well as load combinations for various scenarios. Important notes emphasize the need for adherence to the design parameters and the verification of soil bearing capacity.

Uploaded by

Nick Operario Jr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
23 views40 pages

Terace Structural Computation

The document outlines the structural computation and design analysis for a proposed two-storey residential project, detailing codes, design loads, material stresses, and seismic load reports. It includes specific calculations for dead and live loads, as well as load combinations for various scenarios. Important notes emphasize the need for adherence to the design parameters and the verification of soil bearing capacity.

Uploaded by

Nick Operario Jr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 40

Structural Computation and Design

Analysis

Proposed Two Storey Residential


Project Title

Project Location: Brgy.


Owner: Mr. and Mrs.

Prepared By:

Engr.
PRC No.
PTR No.
Date Issued:
TIN No. 207503008000

Page 1 of 40
PROJECT TITLE: Proposed Two Storey Residential

I. CODES AND REFERENCES


1. National Structural Code of the Philippines (NSCP) Edition 2015
2. Uniform Building Code (UBC),1997
3. American Concrete Institute, (ACI 318-14)

II. DESIGN LOADS:

1. DEAD LOADS

Unit weight of Concrete 24 kn/m ³


Unit weight of Steel 77.30 kn/m ³
Unit weight of Soil 18.90 kn/m ³
Ceiling/Utilities 0.46 kpa
Concrete Toppings (50mm thk.) 1.20 kpa
Slab
125mm thickness (S1) 3.0 kpa

Partition (CHB 10cm thickness) 2.98 Kpa/


7.7Kn/m
(Plastered both faces)

2. LIVE LOADS

Residential 1.92 Kpa


Exterior Balconies 2.90 Kpa
Accessible Area 2.00Kpa

III. MATERIALS STRESSES

1. CONCRETE
Curbs and Slab on grade 2500 psi/ 17.23
mpa
Footing, Column, Beam and Suspended Slab 3000 psi/ 20.70
mpa

2. REINFORCING STEEL BARS


Page 2 of 40
Fy = 275 mpa for bars 20mm ø and larger (60ksi)
Fy = 276 mpa for bars 12mm ø and smaller (40ksi)

3. STRUCTURAL STEEL (A36 Ksi)


Fy = 248 mpa for bars 16mm ø and larger (36ksi)

4. SOIL BEARING CAPACITY


Qa net =120 kpa (SOIL TESTING RESULT)

IV. SEISMIC LOAD REPORT

Direction: X
Typical Eccentricity = 5%
Eccentricity Overrides: No

Period Calculation: Program Calculated


Ct = 0.03 (in feet units)

Top Story: 3RD FLOOR


Bottom Story: GROUND

R = 8.5
I=1
hn = 6.300 (Building Height)

Soil Profile Type = SD


Z = 0.4
Ca = 0.4400
Cv = 0.6400

Seismic Source Type = A


Distance to Source = 191.8 km
Na = 1.0000
Nv = 1.0000

AUTO SEISMIC CALCULATION FORMULAS

Ta = Ct (hn^(3/4))

If Z >= 0.35 (Zone 4) then: If Tetabs <= 1.30 Ta then T = Tetabs, else T
= 1.30 Ta
If Z < 0.35 (Zone 1, 2 or 3) then: If Tetabs <= 1.40 Ta then T = Tetabs, else T
= 1.40 Ta

Page 3 of 40
V = (Cv I W) / (R T) (Eqn. 1)
V <= 2.5 Ca I W / R (Eqn. 2)
V >= 0.11 Ca I W (Eqn. 3)
V >= 0.8 Z Nv I W / R, if Z = 0.40 and Ca & Cv from code (Eqn. 4)

If T <= 0.7 sec, then Ft = 0


If T > 0.7 sec, then Ft = 0.07 T V <= 0.25 V

AUTO SEISMIC CALCULATION RESULTS

Ta = 0.2908 sec
T Used = 0.3781 sec
W Used = 1985.54

V (Eqn 1) = 0.1992W
V (Eqn 2) = 0.1294W
V (Eqn 3) = 0.0484W
V (Eqn 4) = 0.0376W

V Used = 0.1294W = 256.95

Ft Used = 0.00

Page 4 of 40
5|Page
V. LOAD COMBINATION

STATIC CASES
SEISMIC - X – 1
SEISMIC – Y – 2
DEAD LOAD/SDL – 3
LIVE LOAD - 4

LOAD COMB 5 GENERATED NSCP2015 DRIFT 1


3 (1.2) +4( 0.5) +1( 1.0)
LOAD COMB 6 GENERATED NSCP2015 DRIFT 2
3( 1.2)+ 4( 0.5)+ 2( 1.0)
LOAD COMB 7 GENERATED NSCP2015 DRIFT 3
3( 1.2)+ 4( 0.5)+ 1( -1.0)
LOAD COMB 8 GENERATED NSCP2015 DRIFT 4
3 (1.2)+ 4( 0.5)+ 2 (-1.0)
LOAD COMB 9 GENERATED NSCP2015 DRIFT 5
3 (0.9)+ 1( 1.0)
LOAD COMB 10 GENERATED NSCP2015 DRIFT 6
3( 0.9)+ 2( 1.0)
LOAD COMB 11 GENERATED NSCP2015 DRIFT 7
3 (0.9)+ 1( -1.0)
LOAD COMB 12 GENERATED NSCP2015 DRIFT 8
3 (0.9)+ 2 (-1.0)
LOAD COMB 13 GENERATED NSCP2015 SLS 1
3 1.0 4 1.0
LOAD COMB 14 GENERATED NSCP2015 SLS 2
3 1.0 4 1.0 1 0.714
LOAD COMB 15 GENERATED NSCP2015 SLS 3
3 1.0 4 1.0 2 0.714
LOAD COMB 16 GENERATED NSCP2015 SLS 4
3 1.0 4 1.0 1 -0.714
LOAD COMB 17 GENERATED NSCP2015 SLS 5
3 1.0 4 1.0 2 -0.714
LOAD COMB 18 GENERATED NSCP2015 SLS 6
3 0.6 1 0.714
LOAD COMB 19 GENERATED NSCP2015 SLS 7
3 0.6 2 0.714
LOAD COMB 20 GENERATED NSCP2015 SLS 8
3 0.6 1 -0.714
LOAD COMB 21 GENERATED NSCP2015 SLS 9
3 0.6 2 -0.714
LOAD COMB 22 GENERATED NSCP2015 FOUND 1
3 1.4
LOAD COMB 23 GENERATED NSCP2015 FOUND 2
3 1.2 4 1.6
LOAD COMB 24 GENERATED NSCP2015 FOUND 3
3 1.2 4 0.5
LOAD COMB 25 GENERATED NSCP2015 FOUND 4
3 1.2 4 0.5 1 1.0
LOAD COMB 26 GENERATED NSCP2015 FOUND 5

6|Page
3 1.2 4 0.5 2 1.0
LOAD COMB 27 GENERATED NSCP2015 FOUND 6
3 1.2 4 0.5 1 -1.0
LOAD COMB 28 GENERATED NSCP2015 FOUND 7
3 1.2 4 0.5 2 -1.0
LOAD COMB 29 GENERATED NSCP2015 FOUND 8
3 0.9 1 1.0
LOAD COMB 30 GENERATED NSCP2015 FOUND 9
3 0.9 2 1.0
LOAD COMB 31 GENERATED NSCP2015 FOUND 10
3 0.9 1 -1.0
LOAD COMB 32 GENERATED NSCP2015 FOUND 11
3 0.9 2 -1.0
LOAD COMB 33 GENERATED NSCP2015 ULS 1
3 1.4
LOAD COMB 34 GENERATED NSCP2015 ULS 2
3 1.2 4 1.6
LOAD COMB 35 GENERATED NSCP2015 ULS 3
3 1.2 4 0.5
LOAD COMB 36 GENERATED NSCP2015 ULS 4
3 1.42 4 0.5 1 1.0
LOAD COMB 37 GENERATED NSCP2015 ULS 5
3 1.42 4 0.5 2 1.0
LOAD COMB 38 GENERATED NSCP2015 ULS 6
3 1.42 4 0.5 1 -1.0
LOAD COMB 39 GENERATED NSCP2015 ULS 7
3 1.42 4 0.5 2 -1.0
LOAD COMB 40 GENERATED NSCP2015 ULS 8
3 0.98 4 0.5 1 1.0
LOAD COMB 41 GENERATED NSCP2015 ULS 9
3 0.98 4 0.5 2 1.0
LOAD COMB 42 GENERATED NSCP2015 ULS 10
3 0.98 4 0.5 1 -1.0
LOAD COMB 43 GENERATED NSCP2015 ULS 11
3 0.98 4 0.5 2 -1.0
LOAD COMB 44 GENERATED NSCP2015 ULS 12
3 0.68 1 1.0
LOAD COMB 45 GENERATED NSCP2015 ULS 13
3 0.68 2 1.0
LOAD COMB 46 GENERATED NSCP2015 ULS 14
3 0.68 1 -1.0
LOAD COMB 47 GENERATED NSCP2015 ULS 15
3 0.68 2 -1.0
LOAD COMB 48 GENERATED NSCP2015 ULS 16
3 1.12 1 1.0
LOAD COMB 49 GENERATED NSCP2015 ULS 17
3 1.12 2 1.0
LOAD COMB 50 GENERATED NSCP2015 ULS 18
3 1.12 1 -1.0
LOAD COMB 51 GENERATED NSCP2015 ULS 19
3 1.12 2 -1.0

7|Page
MODEL

MOMENT DIAGRAM

8|Page
DEFORMED SHAPE AFTER APPLYING LOAD

9|Page
VI. DESIGN OF BEAM - @ SECOND FLOOR

10 | P a g e
11 | P a g e
12 | P a g e
13 | P a g e
14 | P a g e
@ ROOF FLOOR PLAN

15 | P a g e
16 | P a g e
17 | P a g e
VII. DESIGN OF FOOTING

18 | P a g e
19 | P a g e
20 | P a g e
VIII. DESIGN OF SLAB
DESIGN OF S-1(ONE WAY SLAB)

21 | P a g e
22 | P a g e
DESIGN OF S-2(TWO WAY SLAB)

23 | P a g e
24 | P a g e
25 | P a g e
26 | P a g e
27 | P a g e
28 | P a g e
IX. DESIGN OF COLUMN

29 | P a g e
30 | P a g e
31 | P a g e
32 | P a g e
X . DESIGN OF PURLINS AND TRUSSES

33 | P a g e
34 | P a g e
35 | P a g e
36 | P a g e
37 | P a g e
38 | P a g e
XI . SOFT STOREY

XI . LATERAL DRIFT CHECK

39 | P a g e
IMPORTANT NOTES:
1. No part of this document may be altered or
changed in any way without the written permission
of the undersigned.
2. All design and parameters & results stated herein
must be strictly considered and implemented during
the course of the project.
3. Any discrepancy found between the building plans
and this document must be informed immediately to
the undersigned.
4. This document is applicable solely for this project.
5. The undersigned engineer waives all
responsibilities whatsoever arising from the improper
use of this document whether intentional or
unintentional and if “ Important Notes” no.1 to 4 are
not allowed.
6. The assumed soil bearing capacity of 120kpa (to
be verified by the owner)

40 | P a g e

You might also like