SM0355

CP-X2514WN (C18-25WN)
SERVICE MANUAL CP-X3014WN (C18-30WN)
CP-X4014WN (C18-40WN)
CP-WX3014WN(C18-WX30WN)

Warning
The technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Consumer Electronics Co., Ltd.

Caution
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector.
Be sure to read cautionary items described in the manual to maintain safety before servicing.

Service Warning
1. When replacing the lamp, avoid burns to your fingers as the lamp becomes very hot.
2. Never touch the lamp bulb with a finger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
the power unit (circuit) or the power unit (ballast) after turning on the projector.
4. Do not touch the exhaust fan during operation.
5. The LCD module assembly is likely to be damaged, if replacing the LCD PRISM assembly, do not
hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or as specified.

Contents
1. Features ------------------------------------------------------ 2 8. Disassembly diagram ----------------------------------- 49
2. Specifications ----------------------------------------------- 3 9. Replacement parts list ---------------------------------- 61
3. Names of each part---------------------------------------- 4 10. RS-232C communication ------------------------------ 65
4. Adjustment --------------------------------------------------- 5 11. Block diagram --------------------------------------------- 77
5. Troubleshooting -------------------------------------------11 12. Connector connection diagram ----------------------- 78
6. Service points --------------------------------------------- 22 13. Basic circuit diagram ------------------------------------ 79
7. Wiring diagram-------------------------------------------- 39

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

Multimedia LCD Projector

June 2011
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

1. Features
> Advanced Network Functions
Not only can you control and monitor the projectors via LAN connection, but also project still or moving
images from one or more networked computers.
> Wireless Network Capability
You can use the wireless network by connecting the projector to a PC using the optional USB wireless
adapter.
> Powerful Sound
The projector provides high power sounds from a built-in speaker in lamp-on and standby modes.
> Display via USB
Connecting the projector and a PC via a USB cable lets you display images from the PC.
>PC-Less Presentation
By inserting a USB memory stick or other storage device, which image data is saved to, into the projec-
tor, you can make your presentations without using a PC.
* Not compatible with all USB storage devices and all unage file formats.
> Auto Eco Mode
Auto Eco Mode makes the projector start the projector in ECO mode, even if the projector was in
NORMAL mode when turned off.

2
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

2. Specifications
Drive system TFT active matrix
Liquid 16mm(0.63 type) : CP-X2514WN, CP-X3014WN, CP-X4014WN
Panel size
crystal 15mm(0.59 type) : CP-WX3014WN
panel 1024 (H) x 768 (V) : CP-X2514WN, CP-X3014WN, CP-X4014WN
Number of pixels
1280 (H) x 800 (V) : CP-WX3014WN
Lamp 210W UHP
Type:T.M.D.S
Digital
HDMI Signal level : DC : 3.3V±5%
signal
AC : 0.15-1.56Vp-p
1 Video : Analog 0.7Vp-p(75Ω termination)
Computer IN H/V. sync. : TTL level (positive/negative)
2 Composite sync. : TTL level
Computer
signal Video:Analog 0.7Vp-p, 75Ω output impedance (positive)
Computer OUT H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
VIDEO IN 1.0Vp-p (75Ω termination)
Y signal: 1.0±0.1Vp-p, (75Ω termination)
S-VIDEO IN C signal: 0.286±0.1Vp-p (NTSC burst signal, 75Ω termination)
VIDEO 0.3±0.1Vp-p (PAL/SECAM burst signal, 75Ω termination)
signal
Y 1.0±0.1Vp-p, 75Ω termination (positive)
COMPONENT
CB/PB 0.7±0.1Vp-p, 75Ω termination (positive)
VIDEO
CR/PR 0.7±0.1Vp-p, 75Ω termination (positive)
MIC IN -30~-60dB(1~30mVrms)
AUDIO IN 1
200mVrms, 47kΩ or more (max. 2Vrms)
AUDIO IN 2
AUDIO
signal AUDIO IN 3 L/R 200mVrms, 47kΩ or more (max. 2Vrms)
Linear PCM format
HDMI
Sampling frequency : 48kHz, 44.1kHz, 32kHz
AUDIO OUT output impedance 1kΩ (max. 2Vrms)
INPUT Hi: Max. 20V, Min. 2.6V Lo: Typ. –20.0V, Max. 0.8V
RS232C
OUTPUT Hi: Typ. 8.0V, Min. 5.0V Lo: Typ. –7.0V, Max. –5.0V
Amplitude of |(D+)-(D-)|>0.2V
Type-A
differential signal D+>2.8V, D-<0.3V or D+>2.8V,D-<0.3V
(Storage, I/O Level
Wireless (differential) Amplitude of INPUT: “L” 0.8V or less, “H” 2.0V or more
Network*) signal OUTPUT: “L” 0.3V or less, “H” 2.8V~3.45V
USB
Amplitude of |(D+)-(D-)|>0.2V
Type-B differential signal D+>2.8V, D-<0.3V or D+>2.8V,D-<0.3V
I/O Level
(Mouse,
(differential) Amplitude of INPUT: “L” 0.8V or less, “H” 2.0V or more
Display)
signal OUTPUT: “L” 0.3V or less, “H” 2.8V~3.6V
NETWORK 100Base-TX / 10Base-T Differential output : 1.9 ~ 2.1V (100Ω termination)
Speaker 8W x 2 (mono)
Power supply AC100~120V/3.4A, AC220~240V/1.8A
Power consumption AC100~120V/330W, AC220~240V/310W
Dimensions 317 (W) x 98 (H) x 288 (D) mm (Not including protruding parts)
Weight approx. 3.5kg
Temperature range Operation : 5~35°C Storage : -20~60°C
Remote control x1 User’s manual x 1
Computer cable x 1 Lens cap x 1
Accessories
Power cord x 1 Adapter cover x 1
Battery x 2 Application CD x 1
* Wireless network function requires the optional USB wireless adapter.

3
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

3. Names of each part

Projector (11) (12) Control panel

(1) Lamp cover (or lamp door) (1) STANDBY/ON button (5) (4)
The lamp unit is inside. (2) INPUT button
(2) Speaker (3) MENU button
(9) (2)
(3) Filter cover (4) LAMP indicator
The air filter and intake vent are inside. (5) TEMP indicator
(4) Elevator feet (x2) (6) POWER indicator
(5) Elevator buttons (x2) (6)
(1) (2) (3) (6)
(4)
(6) Remote sensor
(8) (5)
(7) Lens (7) Rear panel
(3) (4)
(8) Lens cover (10) (1) (1) LAN port (11) COMPUTER IN2 port
(9) Intake vents
(2) USB TYPE A port (12) MONITOR OUT port
(10) Control panel
(3) HDMI port (13) CONTROL port
(11) FOCUS ring
(5) (4) USB TYPE B port (14) COMPONENT ports (Y, Cb/Pb, Cr/Pr)
(12) ZOOM ring
(5) MIC port (15) VIDEO port
(13) AC IN (AC inlet)
(13) (6) AUDIO IN1 port (16) S-VIDEO port
(14) Exhaust vent (15)
(14) (7) AUDIO IN2 port (17) Security slot
(15) Rear panel
(8) AUDIO IN3 (R,L) ports (18) Security bar
(9) AUDIO OUT (R,L) ports
WARNING ►Do not open or remove any portion of the product, unless the (10) COMPUTER IN1 port
manuals direct it.
►Do not subject the projector to unstable conditions. (1) (2) (3) (4) (10) (11)
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the lamp is
on.
CAUTION ►Do not touch around the lamp cover and the exhaust
vents during use or just after use, since it is too hot.
►Do not attach anything onto the lens except the lens cover of this
projector because it could damage the lens, such as melting the lens. (6)

(5)

(18) (17) (7) (8) (9) (14) (16) (15) (13) (12)

Remote control (2) (10)

(1) (4)
(1) VIDEO button (6) VIDEO
MY SOURCE/
COMPUTER DOC.CAMERA (3)
(5) ASPECT AUTO SEARCH BLANK (7)
(2) COMPUTER button (16) MAGNIFY FREEZE PAGE VOLUME (12)
UP

(3) SEARCH button (8)

ON 㧗

(14)
DOWN

(4) STANDBY/ON button (9)

OFF

KEYSTONE MY BUTTON MUTE

࡯

(11)
(5) ASPECT button (19) 1 2
(13)
(6) AUTO button (17) (15)
(20) (18)
POSITION MENU

(7) BLANK button (22) ENTER

(21)
(8) MAGNIFY - ON button ESC RESET (23)
(9) MAGNIFY - OFF button (24) (25)
(10) MY SOURCE/DOC.CAMERA button
(11) VOLUME - button
(12) PAGE UP button
(13) PAGE DOWN button
(14) VOLUME + button
(15) MUTE button
(16) FREEZE button
(17) MY BUTTON - 1 button
(18) MY BUTTON - 2 button
(19) KEYSTONE button
(20) POSITION button
(26)
(21) MENU button
(22) ▲/▼/◄/► cursor buttons
(23) ENTER button
(24) ESC button
(25) RESET button Back of
(26) Battery cover the remote control

4
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

4. Adjustment
4-1 Before adjusting
4-1-1 Selection of adjustment
When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart.

Table 4-1: Relation between the replaced part and adjustment

Adjustment
Replaced part AIR SENSOR Flicker Ghost White balance Color uniformity
PSIG (Chap.4-5)
(Chap.4-2) (Chap.4-3) (Chap.4-4) (Chap.4-6) (Chap.4-7)
Dichroic optics unit
LCD prism assembly
PWB assembly Main
Lamp unit assembly
PWB assembly SENSOR
THERMISTOR
B PANEL FAN
RG PANEL FAN
BOTTOM CASE

: means need for adjustment. : means not need for adjustment.

: means recommended.
4-1-2 Setting of condition before adjustments
1. Before starting adjustments, warm up projector When you use the keypad of the projector...
for about 10 minutes.Turn off the automatic a. Press the [ ], [ ], [ ] or [ ] button of the pro-
keystone function in OPTION Menu. If you jector to display the Easy menu. (If the Ad-
changed [AUTO KEYSTONE] from [ON] to vanced menu appears, move to the Easy
[OFF], set to [ON] after adjustment. menu.)
2. Set Zoom Wide to Max. And project an image b. Select the RESET in the Easy menu, and
with more than 1m (40 inches) in diagonal size. then press the [ ] button.
3. Normalizing the video adjustments c. Next, press the [ ] button one time. And re-
Press the [MENU] button to display the EASY press and hold the [ ] button together with
menu. If Advanced menu comes up, move to the the [INPUT] button for 3 seconds or more (the
Easy menu. FACTORY MENU will appear).
Select the RESET in the EASY menu and press
the [ ] or [ENTER] button to open the RESET dia-
log. Choose the EXECUTE with the [ ] button.
4. Perform all adjustments from the FACTORY
MENU. Operate as follows to display the FAC-
TORY MENU.
When you use the remote control...
a. Press the [MENU] button of the remote con-
trol to display the Easy menu. (If the Ad-
vanced menu appears, move to the Easy
menu.)
b. Select the RESET in the Easy menu, and
then press the [ ] or [ENTER] button.
c. Next, press the [RESET] button one time. And
hold the [RESET] button for 3 seconds or lon-
ger (the FACTORY MENU will appear).

5
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

4-2 AIR SENSOR adjustment

When you replaced the PWB assembly MAIN, Adjustment procedure
the PWB assembly SENSOR, the THERMIS- 1. Open the FACTORY MENU and select the VID-AD.
TOR, the B PANEL fan, the RG PANEL fan or 2. Press the [ ] (right) button, and then use the
the BOTTOM CASE, or when you re-attached [ ] (up) or [ ] (down) button to display the A-
the panel duct to the bottom case, make sure SENS dialog.
to carry out this adjustment after completing 3. Press the [ ] (right) button. The automatic ad-
reassembling the projector and cleaning the justment program runs.
The adjustment finishes and the END is high-
air filter.
lighted in about 5 minutes.

A-SENS dialog
A-SENS >>EXE 1: 2: 3: 4: END

4-3 Flicker adjustment (V.COM adjustment)

Test pattern for the adjustment Adjustment procedure
1. Use DAC-P - V.COM - R: in the FACTORY
MENU to adjust so that the flicker at the center of
the screen is less than the flicker at the periphery.
(When the flicker is about the same across the
whole screen, adjust so that the flicker at the center
128/255 of the screen is somewhat less than elsewhere.)
2. In the same way, use DAC-P - V.COM-G: in the
FACTORY MENU to adjust the G color flicker.
3. In the same way, use DAC-P - V.COM-B: in the
FACTORY MENU to adjust the B color flicker.
NOTE: The test pattern shown on the left some-
times has a horizontal line across the screen.

4-4 Ghost adjustment

Test pattern for the adjustment Adjustment procedure
1. Make this adjustment after completing the ad-
justment in the section 4-3.
Set the GHOST W in OPTION-SERVICE-
30% GHOST Menu to 0.
2. Use DAC-P - GHOST - W: in the FACTORY
MENU to make the ghosting disappear.
30% 0/255 (Set the adjustment value to default, and then
raise the value. When the ghosting appears on
the right side of the test pattern, decrease the
112/255
value by 6.)

6
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

4-5 PSIG adjustment (vertical bars adjustment)

Test pattern for the adjustment Adjustment procedure
64 1. Make this adjustment after completing the ad-
/255

88
justment in the section 4-4.
/255
2. Use DAC - P_PSIG - R : in the FACTORY MENU
112
/255
and use it so that vertical bars are minimized.
136
/255 3. In the same way, use DAC - P_PSIG - G : in the
160
/255 FACTORY MENU and use it so that vertical
bars are minimized.
Press ENTER key
4. In the same way, use DAC - P_PSIG - B : in the
FACTORY MENU and use it so that vertical
bars are minimized.
160 136 112 88 64
/255 /255 /255 /255 /255

4-6 White balance adjustment (visual inspection)

Preparations
1. Perform these adjustments after the adjust- 2. Reset gamma correction before adjustment.
ments described in Section 4-5. Place the cursor on [GAMMA] in the FACTORY
MENU, press the [RESET] key and select RESET.
Adjustment procedure
1. First, adjust the G color. 6. Select GAMMA, SB-CNT, and G: in the FACTORY
2. Select GAMMA, SB-CNT, and G: in the FACTORY MENU. If the background is white solid, press the
MENU. If the background is white solid, press the [ENTER] key on the remote control to change to [W]
[ENTER] key on the Remote control transmitter to monochrome in the 33-tone grayscale.
change to [G] monochrome in the 33-tone grayscale. 7. Adjust GAMMA, SB-BRT, R: and B: in the FAC-
3. Adjust GAMMA, SB-CNT, and G: in the FAC- TORY MENU so that low-brightness white bal-
TORY MENU so that brightness of 33 steps is ance is best.
best. 8. Adjust GAMMA, SB-CNT, R: and B: in the FAC-
4. Don’t adjust GAMMA, SB-BRT, and G: in the TORY MENU so that middle-brightness white
FACTORY MENU because we want to keep the balance is best.
best contrast ratio. 9. Repeat steps 7 to 8 above, and adjust so that
5. Then adjust colors R and B. brightness white balance of 33 steps is best.

7
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

4-7 Color uniformity adjustments

Preparations
1. Perform these adjustments after the adjustments
5. Adjustment point No.1 should not be adjusted,
described in the section 4-6.
because it controls the brightness of the entire
2. Make a color uniformity adjustments for the fol-
screen.
lowing tones.
6. To temporarily turn correction off, place the cur-
MIN tone (approx. 7% input signal)
sor on [C.UNIF.] in the Adjust Tone menu and
MID-1 tone (approx. 14% input signal)
press the [ ] key. The ON/OFF menu appears.
MID-2 tone (approx. 21% input signal)
Place the cursor on [ON] with the [ ] key and
MID-3 tone (approx. 29% input signal)
press the [ ] key. To turn it on again, place the
MID-4 tone (approx. 36% input signal)
cursor on [OFF] and press the [ ] key.
MID-5 tone (approx. 50% input signal)
7. Although this adjustment can also be made us-
MID-6 tone (approx. 61% input signal)
ing internal signals, we will here use the [EN-
MAX tone (approx. 75% input signal)
TER] key on the remote control to select the fol-
NOTE: The brightness level of the test patterns
lowing two signals.
in MID-4 and MID-6 is selectable.
Solid monochrome adjustment color (use G
3. Select the [C.UNIF.] in the FACTORY MENU
color adjustment when a color differential me-
and press the [ ] key. This operation displays
ter is used).
the Adjust Tone menu (shown below) on the
Solid white (use for adjustment other than
bottom of the screen.
above).
To choose the tone to be adjusted, press the [
8. Reset color-shading correction before adjust-
] key and then use the [ ] or [ ] key.
ment.
Select the major adjustment lattice point No.
When resetting all values of 8 tones and all
and color, and then adjust them.
colors, place the cursor on [C.UNIF.] in the
4. The major adjustment lattice point numbers (a
FACTORY MENU, press the [RESET] key and
total of 17 points) corresponds to the major ad-
select RESET in the dialog.
justment lattice point positions in the diagram
When resetting only 1 tone, place the cursor
on the right. The color uniformity of the entire
on the tone such as MID-1 to be reset, press
screen can be adjusted by adjusting the white
the [RESET] key and select RESET in the di-
balance for each of the points starting in order
alog.
from the low numbers.
Single tone and monochrome resets cannot
FACTORY MENU be performed.
VID-AD
C. UNIF.
DAC-P Major adjustment lattice point position
GAMMA
STRIPE 14 12 16
V/6
OPTION 6 4 8
V/3
H/6 H/3 H/3 H/6
Adjust tone menu
C.UNIF MIN No. 1 R 0 G 0 B 0 10 2 1 3 11

MID-1 V/3
Major adjustment lattice point No.
MID-2 ... 6
7 5 9
MAX 15 V/6 13 17

ON/OFF ON

OFF

8
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Adjustment procedure 1
(When a color differential meter is used)
1. First adjust the [MID-1] tone [G:]. Note: Since excessive correction may lead to a
2. Select adjustment point [No.2][G:]. correction data overview during internal
When the background is not [G] monochrome, calculations, use the following values for
press the [ENTER] key on the remote control to reference.
switch to solid [G] monochrome. [No.2] to [No.5] ± 40 or less
3. Measure the illumination at adjustment points [No.6] to [No.9] ± 50 or less
No. 2, No.3, No.10 and No.11. [No.10] to [No.13] ± 70 or less
The values should be: [No.14] to [No.17] ± 120 or less
No.2 = Y2 [lx] No.10 = Y10 [lx] 10.Then adjust the [MIN] tone [G] so that the ad-
No.3 = Y3 [lx] No.11 = Y11 [lx] justment values are two times as much as MID-
4. No.2 and No.3 adjustment points have the aver- 1] tone [G] values.
age of Y2 and Y3. This completes [G] color adjustments.
Y2 = ( Y2 + Y3 ) / 2 ± 2 [%] 11.Then adjust [MIN] tone [R] and [B].
Y3 = ( Y2 + Y3 ) / 2 ± 2 [%] Select [No.2] [B:] and press the [ENTER] key
5. No.10 and No.11 adjustment points have the on the Remote control transmitter to change to
average of Y10 and Y11. solid white.
Y10 = ( Y10 + Y11 ) / 2 ± 2 [%] 12.Measure the color coordinates of adjustment
Y11 = ( Y10 + Y11 ) / 2 ± 2 [%] point [No.1] and make a note of them.
6. Then adjust the [MID-1] tone [R] and [B]. Assume that they are x = x1, y = y1.
When the background is [G] monochrome, 13.Now measure the color coordinates of mea-
press the [ENTER] key on the remote control to surement point [No.2] and adjust [No.2][R:] and
switch to solid white. [B:] so that the coordinates are as follows.
7. Measure the color coordinates of adjustment x = x1 ± 0.005 , y = y1 ± 0.010 (Target)
point [No.1] and make a note of them. x = x1 ± 0.020 , y = y1 ± 0.040
Assume that they are x = x1, y = y1. 14.Similarly, measure adjustment points [No.3] to
Note: When the CL-100 color and color differ- [No.17] and adjust their color coordinates start-
ence meter is used, the [ ∆ ](delta) mode ing in order from the small number points.
is convenient. When adjustment point This completes [MIN] tone adjustments.
[No.1] color coordinate has been select- 15.Now make similar adjustments for [MID-2] tone.
ed, set the slide switch on the side to [ ∆ ] (Adjust [MID-2] tone [G] so that the adjustment
(delta) while holding down the [F] button data set half as many as [MID-1] tone [G].)
on the front panel. The measurement 16.Now make similar adjustments for [MID-3],
shown after this displays the deviation [MID-5], [MAX] tones. (It is not necessary to ad-
from measurement point 1. just the [G] data in these tones.)
8. Measure the color coordinates of measurement 17. After completing the step 16, set the value of
point [No.2] and adjust [No.2][R:] and [B:] so the [MID-4] tone [R]: [No.2] to the mean of the
that the coordinates are as follows. values of the [R]: [No.2] in the [MID-3] and
x = x1 ± 0.005 , y = y1 ± 0.010 [MID-4] tones.
9. Similarly, measure adjustment points [No.3] to 18. Set all the values for the [No.2] to [No.17] of
[No.17] and adjust their color coordinates start- the [MID-4] tone [R] and [B] in the same way as
ing in order from the small number points. the step 17.
This completes adjustments required for [MID- 19. Finally, set the data of the [MID-6] tone [R] and
1]. [B] using the values of the [MID-5] and [MAX]
tones in the same way as the [MID-4] tone [R]
and [B] adjustments in the step 17 and 18.

9
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Adjustment procedure 2
(visual inspection)
1. First adjust [MIN] tone [G:]. same color as measurement point [No.1].
2. Select [No.2] [G:]. Adjustment technique:
If the background is [G] monochrome, press First, adjust [B:] of the point whose color is to
the [ENTER] key on the remote control to be adjusted so that it approximates that of
switch to solid white. [No.1]. If [R:] is low at this time, the image will
3. View measurement point [No.2] and [No.3]. have cyan cast, in which case [R:] is increased.
Lower the [G] color intensity only of the color On the other hand, if [R:] is excessive, the im-
point whose [G] color is more intense than age will have a magenta cast, in which case
measurement point [No.1]. [R:] is decreased.
4. View measurement point [No.10] and [No.11]. Overall, a cyan cast makes it easy to see color
Lower the [G] color intensity only of the color shading.
point whose [G] color is more intense than 7. Next, view measurement points [No.4], [No.5],
measurement point [No.1], and raise the inten- [No.12], [No.13] and make similar adjustments.
sity of the point whose color intensity is lower 8. Then adjust measurement points [No.6], [No.7],
than measurement point [No.1]. [No.8], [No.9], [No.14], [No.15], [No.16] and [No.17].
5. Now adjust the [MIN] tone for colors [R] and This completes the [MIN] tone adjustments.
[B]. 9. Make similar adjustments for other tones, ex-
6. View measurement points [No.2], [No.3], cept the [MID-4] and [MID-6] tones, as de-
[No.10] and [No.11]. Adjust the [R] and [B] of scribed in steps 1 to 8 above.
each measurement point so that they have the

No. 2 deviation range No. 10 deviation range No. 3 deviation range No. 11 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8

10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11

7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17

No. 4 deviation range No. 12 deviation range No. 5 deviation range No. 13 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8

10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11

7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17

No. 6 deviation range No. 7 deviation range No. 8 deviation range No. 9 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8

10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11

7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17

No. 14 deviation range No. 15 deviation range No. 16 deviation range No. 17 deviation range
14 12 16 14 12 16 14 12 16 14 12 16
6 4 8 6 4 8 6 4 8 6 4 8

10 2 1 3 11 10 2 1 3 11 10 2 1 3 11 10 2 1 3 11

7 5 9 7 5 9 7 5 9 7 5 9
15 13 17 15 13 17 15 13 17 15 13 17

10
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

5. Troubleshooting
Check points

Power Supply block

Speaker
EW31 EW32
(E1) (CNFL1) E814

EP02 E807 E802 EW5 E800 E801

EA01 Exhaust fan

SPEAKER

EA02
SPEAKER P601

E806 2 P701

S801 Lamp
D303
MAIN board TSW
D302
IS02

IS03
Speaker

NOTES :
1).This picture shows the inside of the projector after the UPPER CASE is removed.
2).Wiring shown in this picture may differ from mass-products. Refer the chapter of “Wiring
diagram” to check the proper wiring.
3) IS02 and IS03 are located on the back side of MAIN board.

11
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Power can not be turned on

*: Be sure to unplug the power cord before measuring resistance.

Are
voltage
supplied at pins Measure resistance*
NO 0Ω
(3) and (5) of E800 on the between pins (3) and (5) of PWB assembly MAIN
PWB assembly MAIN in E800.
standby mode?
(3): +15V Power unit (circuit)
(5): GND
Open
YES

Disconnect TSW Open

from power unit circuit, and Thermal switch (TSW)
measure resistance of
TSW.

0Ω

Power unit (circuit)

Are voltage Measure resis-

supplied at pins (1), tance* between pins (1) and
(7), (9), (11) and (19) of E800 NO 0Ω
(19),between pins (7) and (9), PWB assembly MAIN
on the PWB assembly MAIN and between pins (11) and
in standby mode? (19) of E800.
(1): +5V Power unit (circuit)
YES (7): +17V Open
(9): GND(for +17V)
(11): +6.0V
Power unit (circuit)
(19): GND

Does
LAMP (D303) or YES
TEMP (D302) indicator light Go to the next page
or blink?

NO

Measure
resistance* between Open
pins (1) and (2) of S801 when Lamp door
the lamp door is secure.

Re-attach lamp door

0Ω
Re-attach PWB assembly MAIN
PWB assembly MAIN

12
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Lamp does not light *: Be sure to unplug the power cord

before measuring resistance.

What
is the state of
Light
LAMP indicator D303
during operation?

Is
NG
the LAMP
Not light install the Lamp
installation correct
?

YES

Does
the voltage of
the pin #4 of E814
NO
on the PWB assembly PWB assembly
MAIN change from 4.3V MAIN
to 2.8V during
warming-up?

Yes

Change Light
the lamp. Does Lamp
lamp light?

Not light

Power unit (ballast) Power unit (circuit)

**: DC fan connectors are E801, E802, Measure

E806 and E807. What resistance*
Blinks Lights between pins of OK
is the state of
TEMP indicator harnesses CNFL1 and E1 after
D302?
disconnecting them from
MAIN board.

Not light PWB assembly

Are MAIN
the voltage and blink NG
supplied to the (open / short) CNFL2 pins #1-#4: 280 to 310Ω
NO (0V) pin (2) of connectors** CNFL2 pins #2-#3: 5 to 20kΩ
E1 pins #1-#2 : 5 to 20kΩ
for DC fans soon after
the button is
pressed? PWB assembly SENSOR (CNFL1)
or
PWB assembly THERMISTOR (E1)
Is
MAIN YES the voltage
(5V or higher)
at the (1) of E814 on the YES
PWB assembly MAIN set to
"L" during warming- “L” = 0V
Observe up?
the voltage PWB assembly MAIN
Correct waveforms at pin (1) No
of connectors for DC fans**
soon after the button
Power unit (ballast)
is pressed.

PWB assembly
MAIN Correct waveform is drawn below.
incorrect

DC fan
f ≥ 40Hz
(failed in above check)

13
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Picture is not displayed via COMPUTER IN port

Are
Confirm
the splash No NG
the LCD Panels Connector
screen and the user menu
connection to the MAIN
displayed correctly? P501 / P601 / P701
board.

OK
YES

PWB assembly MAIN LCD prism assembly

YES

Is
the picture
from MONITOR OUT No
port displayed correctly on PWB assembly MAIN
another monitor
display? THS7327PHPR
(IS03)
YES
SN74LV14APW
(IS02)

PWB assembly MAIN THS7327PHP

(IS03)

Picture is not displayed via the VIDEO , the S-VIDEO or COMPONENT VIDEO port

Are
Confirm
the splash No NG
the LCD Panels Connector
screen and the user menu
connection to the MAIN
displayed correctly? P501 / P601 / P701
board.

OK
YES

PWB assembly MAIN LCD prism assembly

PWB assembly MAIN PWB assembly INPUT

14
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Image via the L AN port is n ot

displayed on the screen.

NO Select the LAN port with

Is the LAN port selected as
INPUT button
an input source?

YES

Can communicate with NO

computer via LAN port? Check the flow on page 17

YES

Total PC connection NO Check the PC software Live

number to projector Viewer and update to the
within 30? latest version.

YES

Re-connect after other PCs

finish Live Viewer.

15
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

No sound

(Make sure the state of MUTE , Volume and SPEAKER setting)

Disconnect
the speaker from the
PWB assembly Main and infinity
measure its Speaker
resistance.

about 16

PWB assembly Main PWB assembly INPUT

Can not control to RS-232C The check after parts change

1. PC power supply OFF

2. Connection of cable
3. Projector starting
4. PC starting
*When not operating :
When Set the STANDBY MODE
YES PC set up change or cable change.
the projector is at the as “NORMAL” in the
standby mode setting Advanced Menu > SETUP
“SAVING” ? menu

NO

Check the
RS-232C cable. NO
Are pin No. 2 and 3 Use cross cable
crossed?

YES

Are the
signals input at each YES
pins on the Cable? PWB assembly MAIN

Pin : RX
Pin : TX
NO PWB assembly INPUT

Make sure PC setup

16
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Can’t communicate with computer

via NETWORK terminal.

Does the Lamp When Set the STANDBY MODE

on lower right of the NO the projector is at the YES as “NORMAL” in the
Network connector light standby mode setting Advanced Menu > SETUP
in green? “SAVING” ? menu

YES NO

Is the computer NO
connected with the Make sure NETWORK
projector directly? hardware

YES

Is IP Address in NO
the Network > Information menu PWB assembly MAIN
set to “0.0.0.0” after waiting
more than 1 minute?

YES

Are there
any damage to the cable NO
between computer and PWB assembly MAIN
projector?

YES

Use new LAN cable

Are If
both IP Address Subnet Mask is
NO Use the same IP address
and Subnet mask in the "255.255.255.0", are NO
Network > Information menu set to "xxx.yyy.zzz" portion of IP address setting except for "N" on
"0.0.0.0" after waiting more than setting of computer and computer and projector.
1 minute? projector
same? IP address: xxx.yyy.zzz.N
YES
YES

PWB assembly MAIN

Is Is there
the DHCP in the DHCP server on YES Make sure those settings
YES
Advanced Menu > Network the network which the of the projector and
> Setup > DHCP is on? projector is connected computer are correct.
to?

NO NO

Set IP address and Subnet Mask Set IP address and Subnet

in the Advanced Menu > Network Mask in the
> SETUP menu with manual operation. NETWORK-SETUP menu with
manual operation.

17
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

㪚㪸㫅㩾㫋㩷㪺㫆㫄㫄㫌㫅㫀㪺㪸㫋㪼㩷㫎㫀㫋㪿㩷
㪺㫆㫄㫇㫌㫋㪼㫉㩷㪹㫐㩷㫎㫀㫉㪼㫃㪼㫊㫊㪅

㪧㫃㪼㪸㫊㪼㩷㪺㪿㪼㪺㫂㩷㫎㫀㫋㪿㩷㫋㪿㪼㩷㫇㫉㫆㫁㪼㪺㫋㫆㫉㩷㫃㪸㫄㫇㩷㫆㫅㪅

㪠㫊㩷㫋㪿㪼㩷㫎㫀㫉㪼㫃㪼㫊㫊㩷㪸㪻㪸㫇㫋㪼㫉㩷 㪥㪦
㪺㫆㫅㫅㪼㪺㫋㪼㪻㩷㫇㫉㫆㫇㪼㫉㫃㫐㩷㪖 㪧㫃㪼㪸㫊㪼㩷㪺㫆㫅㫅㪼㪺㫋㩷㫋㪿㪼㩷㪸㪻㪸㫇㫋㪼㫉㩷㫇㫉㫆㫇㪼㫉㫃㫐㪅

㪰㪜㪪
㪧㫃㪼㪸㫊㪼㩷㫎㪸㫀㫋㩷㫄㫆㫉㪼㩷㫋㪿㪸㫅㩷㫆㫅㪼㩷㫄㫀㫅㫌㫋㪼㩷㪸㪽㫋㪼㫉㩷㫋㪿㪼㩷
㪸㪻㪸㫇㫋㪼㫉㩷㫀㫊㩷㪺㫆㫅㫅㪼㪺㫋㪼㪻

㪠㫊㩷㪧㪚㫃㪼㫊㫊㩷㫇㫉㪼㪸㫊㪼㫅㫋㪸㫋㫀㫆㫅㩷
㪥㪦 㪥㪦
㫌㫊㫀㫅㪾㩷㪬㪪㪙㩷㫄㪼㫄㫆㫉㫐㩷 㪩㪼㫇㫃㪸㪺㪼㩷㪤㪸㫀㫅㩷㪧㪚㪙㩷㪸㫅㪻㩷㫋㫉㫐㩷㪸㪾㪸㫀㫅㪅
㪠㫊㩷㪣㪜㪛㩷㫆㫅㩷㪸㪻㪸㫇㫋㪼㫉㩷
㫎㫆㫉㫂㫊㪖

㪰㪜㪪
㪰㪜㪪

㪩㪼㫇㫃㪸㪺㪼㩷㫎㫀㫉㪼㫃㪼㫊㫊㩷㪸㪻㪸㫇㫋㪼㫉㩷㪸㫅㪻㩷㫋㫉㫐㩷
㪚㪸㫅㩷㩹㪤㪘㪚㩷㪘㪻㪻㫉㪼㫊㫊㩹㩷㪹㪼㩷
㪥㪦 㪸㪾㪸㫀㫅㪅
㫉㪼㪸㪻㩷㪽㫉㫆㫄㩷㫎㫀㫉㪼㫃㪼㫊㫊㩷
㫀㫅㪽㫆㫉㫄㪸㫋㫀㫆㫅㩷㫄㪼㫅㫌㩷㪖

㪰㪜㪪

㪘㪚㩷㪦㪝㪝㩷㫐㫆㫌㫉㩷㫇㫉㫆㫁㪼㪺㫋㫆㫉㩷㪸㫅㪻㩷㪧㪚㩷㪸㫅㪻㩷㩷
㪚㪸㫅㩷㩹㪪㪪㪠㪛㩹㩷㫆㪽㩷㫐㫆㫌㫉㩷
㫋㫉㫐㩷㪸㪾㪸㫀㫅㪅㩷㪠㪽㩷㫋㪿㪼㫐㩷㫊㫋㫀㫃㫃㩷㪺㪸㫅㫅㫆㫋㩷㪹㪼㩷
㫇㫉㫆㫁㪼㪺㫋㫆㫉㩷㪹㪼㩷㪽㫆㫌㫅㪻 㪥㪦
㪺㫆㫅㫅㪼㪺㫋㪼㪻㪃㩷㫉㪼㫇㫃㪸㪺㪼㩷㫋㪿㪼㩷㫎㫀㫉㪼㫃㪼㫊㫊㩷
㪽㫉㫆㫄㩷㫐㫆㫌㫉㩷㪧㪚㩷㪖
㪸㪻㪸㫇㫋㪼㫉㩷㪸㫅㪻㩷㫋㫉㫐㩷㪸㪾㪸㫀㫅㪅

㪰㪜㪪

㪚㪸㫅㩷㫐㫆㫌㩷㫊㪼㪼㩷㫋㪿㪼㩷㩹㪪㪪㪠㪛㩹 㪧㫃㪼㪸㫊㪼㩷㫉㪼㫊㪼㫋㩷㫋㪿㪼㩷㫇㫉㫆㫁㪼㪺㫋㫆㫉㩾㫊㩷㫎㫀㫉㪼㫃㪼㫊㫊㩷
㪠㫊㩷㫋㪿㪼㫉㪼㩷㪸㫅㫆㫋㪿㪼㫉㩷㫇㫉㫆㫁㪼㪺㫋㫆㫉㩷
㫄㫆㫉㪼㩷㫋㪿㪸㫅㩷㪈㪇㩷㪽㫉㫆㫄㩷㫐㫆㫌㫉㩷 㪥㪦 㪥㪦 㫊㪼㫋㫋㫀㫅㪾㫊㩷㫋㫆㩷㪻㪼㪽㪸㫌㫃㫋㪃㩷㪸㫅㪻㩷㫋㫉㫐㩷㪸㪾㪸㫀㫅㩷㪹㫐
㫅㪼㪸㫉㫐㪹㫐㩷㩿㫎㫀㫋㪿㫀㫅㩷㪈㪇㪇㫄㪀㩷
㪺㫆㫄㫇㫌㫋㪼㫉㩷㫆㫉㩷㫇㫉㫆㫁㪼㪺㫋㫆㫉㩾㫊㩷 㫌㫊㫀㫅㪾㩷㪧㪸㫊㫊㪺㫆㪻㪼㪅
㫎㪿㫀㪺㪿㩷㫌㫊㪼㩷㫊㪸㫄㪼㩷㫎㫀㫉㪼㫃㪼㫊㫊㩷
㫎㫀㫉㪼㫃㪼㫊㫊㩷㫀㫅㪽㫆㫉㫄㪸㫋㫀㫆㫅㩷

㪰㪜㪪 㪰㪜㪪

㪩㪼㫄㫆㫍㪼㩷㫐㫆㫌㫉㩷㫇㫉㫆㫁㪼㪺㫋㫆㫉
㪸㫅㪻㩷㪧㪚㩷㪽㫉㫆㫄㩷㫋㪿㪼㩷㫇㫃㪸㪺㪼㩷㪸㫅㪻㩷㫋㫉㫐㩷㪸㪾㪸㫀㫅㪅

18
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Troubleshooting for other Network/USB problems

Problem Likely Cause Things to Check
The projector is not turned on. Is the projector’s lamp on?
No image The projector’s input source isn’t Is the projector switched to LAN?
switched to LAN.
The network packet congestion is Check the cable connection
occurred. diagram making sure no "ring"
Projector does not work when the
or "loop" connection is made in
netowork cable is connected.
the network that the projector is
connected to.
The time has not been configured. Set the Date and Time in the
Network menu of the projector.

The projector displays "2010/1/1 Set the Date and Time in the
0:00"as the Date and Time in the Network menu of the projector
Network Info after the AC power is every time the projector is turned
cut off because the projector has on.
no battery for the internal clock.
The time is not adjusted by the Configure the Daylight Saving Time
Daylight Saving Time correctly. in the Date/Time Settings with a
Time is not displayed correctly web browser.

The projector cannot get the time Check the projector is connected
from SNTP server. to the network correctly.
Configure the correct SNTP server
address in the Date/Time Settings
with a web browser.
The Time Difference is not Configure the Time Difference,
comfigured correctly. and then do the Current Date and
the Current Time in the Date/Time
Settings with a web browser.
The computer and/or projector’s Check the network configurations
network settings are not configured of the computer and projector.
correctly. If you change the projector’s
settings, turn off the projector’s AC
power and then turn it on again.
If you simply put the projector in
The projector that you STANDBY power mode and then
want to connect to is turn it on again, the new settings
nowhere to be found might not take effect.
on the list of available
projectors Firewall software other than Refer to the manual for the firewall
Connection to the Network

Windows Firewall is installed in software and take one of the

your computer. following actions:
- Exclude the “LiveViewer” from
blocking item list
- Disable the firewall while using
the “LiveViewer”
The computer and/or projector's Check the network configurations
network settings are not configured of the computer and projector.
correctly.
An access point is used, and your Use network utilities that may come
computer is connected to the with your computer or wireless
access point via wireless LAN. LAN card to establish wireless
network connection. For detail,
Can't communicate refer to the manual of the computer
or the card.
Security software is blocking Change the security setting to
network communication. allow "LiveViewer" to use.
The number of PC connection Try again after one of session is
exceeds the limit (max. 30). disconnected. (finish "LiveViewer"
application).

19
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Problem Likely Cause Things to Check

The "LiveViewer" is not work on Apply the latest Service Pack to
Can't Install LiveViewer Windows Vista without any Service your PC.
Pack.
The projector isn’t capable of Switching the priority to
relaying dynamic images such ‘Transmission Speed’ under the
as PowerPoint® animation at full options menu may help to improve
The projected image is speed. speed.
rather slow compared to
that of the computer The compression rate being used Switching the priority to
for transferring the images is too ‘Transmission Speed’ under the
low. options menu may help to improve
speed.
Using screensaver with password. The "LiveViewer" cannot send
No Image computer screen data while using
screensaver with password.
In some combinations of If there is a video acceleration
computer's video card and level adjustment function in your
application software, there is application, please try to adjust it.
Network Presentation

a possibility that true image Refer your application manual in

especially movies played by media detail.
Can't display the movies player - cannot be transferred to
correctly. the projector with the “LiveViewer”.

The LiveViewer can't transfer Remove DFMirage driver when

movie when DFMirage driver was you need to display movie with
installed. LiveViewer.

Network connection The computer-Projector network Please re-connect using

between the computer connection might be disconnected “Connect button” after changing
and projector is when computer display resolution computer display resolution, or
disconnected when is changed while displaying picture. change display resolution before
computer display connecting with the “LiveViewer”.
resolution is changed
during Network
Presentation.
The compression rate being used Try setting the priority to 'Image
Images contain lots of for transferring the images is too Quality' in the “LiveViewer” Option
interference. high. menu. You may experience a drop
in speed.

Using the “LiveViewer” with The “LiveViewer” does not support

Neither transparency Windows Aero mode. these features of Windows Vista
nor translucency effects Aero.
(Glass)

20
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Problem Likely Cause Things to Check

CD-ROM autorun is disabled. Launch "LiveViewer Lite for USB"
from My Computer manually, or
Can't run "LiveViewer configure to enable CD-ROM
USB Display

Lite for USB" autorun.

automatically.
Screensaver is running. Exit the screensaver.
Security software is blocking USB Change the security software
No Image data transfer - especially write data setting to allow to use "LiveViewer
for USB memory. Lite for USB".

Others Communication between the Try “Network Restart” in the

- Information from the projector projector and computer is not NETWORK menu.
to computer is not correct or working well.
completed NETWORK Functions of the
- The projector does not respond projector is not working well.
- Image on screen is frozen.

NOTE
It is recommended to refer the section “Troubleshooting” in the latest version of User’s Manual - Operating
Guide from Hitachi web site.

21
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6. Service points
6-1 Lead free solder [CAUTION]
This product uses lead free solder (unleaded) to help preserve the environment. Please read these
instructions before attempting any soldering work.

CAUTION
Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder
can splatter at high temperatures (600˚C).

Lead free solder indicator

Printed circuit boards using lead free solder are engraved with an "F" or "LF".

Properties of lead free solder

The melting point of lead free solder is 40-50˚C higher than leaded solder.

Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not
taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)

Precautions when using leaded solder

Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the
lead free solder has been completely melted (do not apply the soldering iron without solder).

Servicing soldering iron

A soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.

Recommended soldering iron:

Soldering iron with temperature control function (temperature range: 320-450˚C)

Recommended temperature range per part:

Part Soldering iron temperature
Mounting (chips) on mounted PCB 320˚C±30˚C
Mounting (chips) on empty PCB 380˚C±30˚C
Chassis, metallic shield, etc. 420˚C±30˚C

The PWB assembly which has used lead free solder

PWB assembly MAIN PWB assembly SENSOR
PWB assembly REMOTE POWER UNIT (BALLAST)
PWB assembly INPUT POWER UNIT (CIRCUIT)
PWB assembly RGB

22
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-2 Before Replacing The LCD Prism assembly

CAUTION
Make sure not to let a screwdriver touch LCD panels when you replace a LCD prism assembly with a new one.

You should not replace separately the parts of the LCD prism
assembly. In case of a failure in any parts of LCD/PRISM
assembly, replace the whole LCD/PRISM assembly.

Do not disassemble the unit

because replacement of separate
parts is not possible.

6-3 Cleaning the dust off the panels and optical filters

WARNING
Wear sunglasses to protect your eyes when you maintain the projector with its lamp on.

1. Preparation
Please prepare cleaning tools and materials as follows. And prepare relatively clean room not to work in
additional dust, while removing operation.
(1) Swab for cleaning : P#: NX32451, "Cotton stick BB-014"
(2) Air duster (Dust blower, spray can)
(3) Vacuum cleaner
2. Disassembling and setting up.
(1) Turn off the projector, and unplug the power cord.
(2) Remove the lamp cover and upper case, according to the disassembling diagram of chapter 8.
(3) Disconnect the LCD panel flexible cables and speaker cables. Remove screws to detach the earth
metal and the F-guard earth metal and to make the PWB assembly MAIN free.
Remove these screws

F-guard earth metal

Earth metal

Remove these screws

Speaker
cables Flexible cables of LCD panel

23
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(4) Press and hold the stem of the lamp door switch S801 with insulating material during this work.
(5) Fasten the CNGD1 in place as shown in the picture.

Press Hold
S801 S801

S801

CNGD1

(6) Raise the PWB assembly MAIN on its lens side, and keep it in this position during cleaning work.

CAUTION
Do not let the contacts of panel flexible cables touch any electric parts of the PWB assembly MAIN or any
others until unplugging the AC cord from the projector.
Do not let the electric parts of the PWB assembly MAIN touch the power shield metal or other metallic
parts.
Do not put stress on the terminals of the PWB assembly MAIN and the PWB assembly INPUT.

3. Maintenance point

Actual formation
Panel

Optical Filter

Each color part has similar construction.By using swab and air
duster, you can easily remove dust from panel and optical filter.

24
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

4. Cleaning the panels and optical filters

(1) Turn on the projector and lit on the lamp.
(2) Blow the dust off panels and optical filters using an air blower.
• Focusing on the dust makes it easy to check the dust on screen.
• The separated dust is blown away by the air cooling system of the projector.
• Pay attention not to damage panels and optical filters.
(3) If you cannot remove the dust on LCD panels using an air blower, wipe the surface of LCD panels with a swab.

CAUTION
Do not touch or wipe the surfaces of the optical filters mentioned below for each model when
cleaning the LCD panels. Optical filter for B of
CP-X2514WN the dichroic optics unit
Optical filter for B color attached on the LCD panel
dichroic optics unit
CP-X3014WN
Optical filter for B color attached on the
dichroic optics unit 㪩 㪙
Optical filter for G color attached on the LCD

CP-X4014WN, CP-WX3014WN
Optical filter for B color attached on the
dichroic optics unit
Optical filter for B color attached on the LCD Optical filter for G of
prism assembly the LCD prism 㪞
Optical filter for G color attached on the LCD Optical filter for B of
prism assembly the LCD prism

[ Cross section of LCD prism ] 㪪㫎㪸㪹

㪦㫇㫋㫀㪺㪸㫃㩷㪽㫀㫃㫋㪼㫉

㪧㪸㫅㪼㫃

㪧㫉㫀㫊㫄

Never touch or wipe this surface of the optical filter

mentioned below when cleaning the LCD panel.
CP-X3014WN : Optical filter for G color
CP-X4014WN, CP-WX3014WN : Optical filters for B and G color

5. Re-assembly
(1) Turn off the set and unplug the power cord.
(2) Remove an insulator from S801.
(3) Screw down the PWB assembly MAIN, the earth metal, the F-guard earth metal and CNGD1 cable in place,
and connect the panel flexible cables and the speaker cables to the PWB assembly MAIN.
(4) Re-assemble the set.
(5) While re-assembling, please clean the air filter by using a vacuum cleaner.

25
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-4 Installing the Batteries

Please insert the batteries into the remote control before using it. If the remote control
starts to malfunction, try to replace the batteries. If you will not use the remote control for
long period, remove the batteries from the remote control and store them in a safe place.
Holding the hook part of the battery
1. cover, remove it.
1 2 3

Align and insert the two AA batteries

2. (HITACHI MAXELL, Part No.LR6 or R6P)
according to their plus and minus terminals
as indicated in the remote control.
Replace the battery cover in the direction of the arrow and snap it back into place.
3.
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.

26
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-5 Air filter

Cleaning and replacing the air filter
The air filter unit of this projector consists of a filter cover, two kinds of filters, and
a filter frame. The new double large filters system is expected to function longer.
However, please check and clean it periodically to keep ventilation needed for
normal operation of the projector.
When the indicators or a message prompts you to clean the air filter, comply with
it as soon as possible. Replace the filters when they are damaged or too soiled.

When you replace the lamp, please replace the air filter. An air filter of specified
type will come together with a replacement lamp for this projector.
Filter cover
1. Turn the projector off, and unplug the power cord.
Allow the projector to sufficiently cool down.
2

2. Use a vacuum cleaner on and around the filter cover.

3. While supporting the projector with one hand, use
your other hand to pull the filter cover forward in the
direction of the arrow. 3

4. Use a vacuum cleaner for the filter vent of the

projector and the outer side of the filter unit.

5. Take the filters out while holding the filter cover.

Filter unit
6. Use a vacuum cleaner onto the both sides of the
filters. When vacuuming up the fine meshed filter, 4
hold it so it will not be sucked in. If the filters are
damaged or heavily soiled, replace them with the
new ones.
Filter cover
Put the filters back into the filter cover.
7. Put the coarse meshed filter into a filter cover 7
first. Then put the fine meshed filter on the coarse
meshed one, turning its stitched side up.
Put the filter unit back Filter (fine meshed)
8. into the projector. Stitched
side
Filter (coarse meshed)

9. Turn the projector on and reset the filter time using the FILTER TIME item in
the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button.
A dialog will appear.
(3) Press the ► button to select “OK” on the dialog. It performs resetting the
filter time.

WARNING ►Before taking care of the air filter, make sure the power cable
is not plugged in, then allow the projector to cool sufficiently. Taking care of the
air filter in a high temperature state of the projector could cause an electric shock,
a burn or malfunction to the projector.
►Use only the air filter of the specified type. Do not use the projector without the
air filter or the filter cover. It could result in a fire or malfunction to the projector.
►Clean the air filter periodically. If the air filter becomes clogged by dust or the
like, internal temperatures rise and could cause a fire, a burn or malfunction to
the projector.

NOTE • Please replace the air filter when it is damaged or too soiled.
• When you replace the projection lamp, please replace the air filter. An air filter
of specified type will come together with a replacement lamp for this projector.
• Please reset the filter time only when you have cleaned or replaced the air
filter, for a suitable indication about the air filter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.

27
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-6 Lamp

WARNING
HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE
●The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn
out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different life-
time, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it
is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape
from the projector’s vent holes.
●About disposal of a lamp • This product contains a mercury lamp; do not put it in the trash. Dispose of
in accord with environmental laws.
For lamp recycling, go to www.lamprecycle.org. (in the US) For product disposal, contact your local gov-
ernment agency or www.eiae.org (in the US) or www.epsc.ca (in Canada).
• If the lamp should break (it will make a loud bang when it does), unplug the power cord from
the outlet. Note that shards of glass could damage the projector’s internals, or cause injury
during handling.
Disconnect • If the lamp should break (it will make a loud bang when it does), ventilate the room well, and
the plug make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes
from the or mouth.
power • Before replacing the lamp, turn the projector off and unplug the power cord, then wait at least
outlet 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as
well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
• Do not open the lamp cover while the projector is suspended from above. This is dangerous,
since if the lamp’s bulb has broken, the shards will fall out when the cover is opened.
• Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that
the screws are screwed in firmly. Loose screws could result in damage or injury.
• Use only the lamp of the specified type.
• If the lamp breaks soon after the first time it is used, it is possible that there are electrical
problems elsewhere besides the lamp.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• Using the lamp for long periods of time could cause it dark, not to light up or to burst. When
the pictures appear dark, or when the color tone is poor, please replace the lamp as soon as
possible. Do not use old (used) lamps; this is a cause of breakage.
• Do not break up the lamp to replace because the structual parts broken up is unavailable.

28
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Replacing the lamp

A lamp has finite product life. Using the lamp for long periods of time could cause
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended.
lamp cover 3
Replacing the lamp
Turn the projector off, and unplug the power cord.
1. Allow the projector to cool for at least 45 minutes.
Prepare a new lamp.
2.
In case of replacement by yourself, follow the following procedure.
Loosen the screw (marked by arrow) of the lamp
3. cover and then slide and lift the lamp cover to the
side to remove it.
Loosen the 3 screws (marked by arrow) of the lamp,
4. and slowly pick up the lamp by the handles. Never
loosen any other screws. 4
Handles
Insert the new lamp, and retighten firmly the 3
5. screws of the lamp that are loosened in the previous
process to lock it in place.
While putting the interlocking parts of the lamp cover
6. and the projector together, slide the lamp cover back in
place. Then firmly fasten the screw of the lamp cover.
Turn the projector on and reset the lamp time using
7. the LAMP TIME item in the OPTION menu. 6
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using
the ▼/▲ button, then press the ► button.
(3) Point at the OPTION in the left column of the menu
using the ▼/▲button, then press the ► button.
(4) Point at the LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
(5) Press the ► button to select “OK” on the dialog. It performs resetting the lamp time.
CAUTION ►Do not touch any inner space of the projector, while the lamp
is taken out.

NOTE • Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.

29
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-7 Other care

WARNING
Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the
projector to cool sufficiently. The care in a high temperature state of the projector could cause a burn and/
or malfunction to the projector.
Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and
and/or malfunction to the projector.
• Don’t put a container containing water , cleaner or chemicals near the projector.
• Don’t use aerosols or sprays.

CAUTION
Please take right care of the projector according to the following. Incorrect care could cause not only an
injury but adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.

Inside of the projector

In order to ensure the safe use of the projector, it needs to clean and inspect the projector about once a year.

Caring for the lens

If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the
lens, being cautions of the handling.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available
lens-cleaning wipe. Do not touch the lens directly with your hand.

Caring for the cabinet and remote control

Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
2. After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing
well. Then, wipe lightly with a soft, dry cloth.

30
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-8 Notice of AUTO adjustment

Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, and H_PHASE
automatically.
In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts
in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly
distinguished to period of blanking on signal processing.
To avoid such phenomena, AUTO function should be used with the full size picture that has bright tone on its
peripheral.

Image when AUTO operates correctly Image when AUTO fails.

Noting image of top or bottom lines.
Shift of the image to East or West.
Artifacts on image. Etc.
Note
1) The phenomenon at the failure of AUTO adjustment depends on resolution of input source, scene of picture
etc.
2) There is no failure above in AUTO with video source through VIDEO, S-VIDEO or COMPONENT input.
The reason is why recognition of input signal’s standard does not need to search the capture range from input
signal itself.

31
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-9 How to deactivate the security functions

This projector is equipped with security functions.
(1)MyScreen PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and
prevent the currently registered MyScreen image from being overwritten.
(2)PIN LOCK
PIN LOCK is a function which prevents the projector from being used unless a registered Code is input.
(3)Transition detector
Transition detector is a function which prevents the projector from being used if vertical angle of the
projector and mirror setting is not the same as the one recorded.
64#05+6+10&'6'%61410

6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF
HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP

2+0$1:

+H[QWYKUJVQJCXGCUSWCTGKOCIG
QPUETGGPCICKP
FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW

Transition Detector Alarm

(4)MY TEXT
This item allows you to display your own message (MY TEXT) on the START UP screen and
INPUT_INFORMATION. It can be protected by a password to prevent it from being overwritten.

It is possible to deactivate all security functions temporarily with the following procedures.

(1) Go to "ENTER PASSWORD" on SECURITY menu and press the ► button.

Then, ENTER PASSWORD box will be displayed.
(The BOX will be displayed by pressing the [MENU] button (remote) or [▲/▼/◄/►] button (keypad) when
Transition Detector Alarm is displayed.)

ENTER PASSWORD box

(2) Press the [Magnify off] button once, then press [Magnify off] button of remote for 3 second or more to
display ENTER SERVICE PASSWORD box.

ENTER SERVICE PASSWORD box

(3) Enter the Life Key (MENU, ▼, KEYSTONE, ▲). Then all security functions will be deactivated until the
projector is turned off.

Note: • The Life key can be used up to 30 times. The key cannot be used thereafter. If the Life key cannot be
used, see the paragraph of SECURITY in the User’s Manual.
The frequency in which Life key is input will be set to 0 after the registered code is input.
• The SECURITY Menu can not be operated if the SECURITY PASSWORD was released by Life key.
•The MIRROR and the KEYSTONE are not memorized though they are possible to operate if
Transition Detector was released by Life key.

32
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-10 PIN LOCK System

If the following PIN BOX menu appears after powering on the projector, the PIN LOCK system has been
activated. Under such a condition, key operations and signal displaying are inhibited. To open the PIN LOCK
system, we need to input the correct 4 digits PIN CODE. If correct PIN CODE is not input in 5 min., the lamp
will be turned off automatically.

PIN BOX

Returning repaired unit

Use the Master PIN code. See the paragraph of Releasing the PIN LOCK system deactivation.

Swap unit/Returned unit

Release all security systems. See the paragraph of the PIN LOCK system deactivation.

Releasing the PIN LOCK System

When the PIN BOX menu is displayed, sequentially enter the codes with the remote controller as follows.
In accordance with the remote controller button entry, “ ” mark appears in the PIN BOX menu.
Master PIN codes
1st entry code: Press the “MENU” button.
2nd entry code: Press the “ ” button.
3rd entry code: Press the “KEYSTONE ” button.
4th entry code: Press the “ ” button.
Note: The Master PIN codes can be used up to 30 times. The codes cannot be used thereafter. If the
Master PIN codes cannot be used, see the paragraph of the PIN LOCK system deactivation.

The PIN LOCK System deactivation

1. When the PIN BOX menu is displayed, press “RESET” for 3 seconds or more in order to get the ID
Inquiring Code.

Inquiring Code

PIN BOX (ID Inquiring Code)

2. Send HITACHI sales company the Inquiring code (10 digits) to obtain the correct PIN code.
3. While the PIN BOX is displayed, enter the correct PIN CODE that HITACHI sales company provided.
4. Open menu and select “TURN OFF” from the PIN LOCK items in the SECURITY menu. Then the PIN
BOX menu appears.
Password is required to display the Security Menu.
See the SECURITY menu: User’s Manual - Operating Guide.
5. Input the correct PIN code in the PIN BOX menu.
6.Then PIN LOCK will be set to “OFF”.
7.Deactivate the MyScreen PASSWORD, Transition Detector and My Text PASSWORD as well.
Reset the Security Password to the factory default numbers;
‘3292’ for CP-X2514WN/CP-X3014WN/CP-X4014WN,
‘1692’ for CP-WX3014WN..
See the SECURITY menu: User’s Manual - Operating Guide.

33
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-11 Related Messages

When any messages appear, check and verify them according to the following table.
Although these messages will automatically disappear after several minutes, they will
reappear every time the power is turned on.

Message Description
There is no input signal.
Please confirm the signal input connection and the status
of the signal source.
The USB TYPE B port is selected as the picture input
source even if MOUSE is selected for USB TYPE B
Select USB DISPLAY in the dialog to project the picture
input to the USB TYPE B port. In this case, you cannot use
the simple mouse and keyboard function. Otherwise select
other port for picture input.
Projector is waiting for an image file.
Check the hardware connection settings on the projector
and network-related settings.
The computer-Projector network connection might be
disconnected. Please re-connect them.

The horizontal or vertical frequency of the input signal is

not within the specified range.
Please confirm the specs for your projector or the signal
source specs.
An improper signal is input.
Please confirm the specs for your projector or the signal
source specs.

Message Description
The internal temperature is rising.
Please turn the power off and allow the projector to cool
down at least 20 minutes. After having confirmed the
following items, please turn the power ON again.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
• Is the setting for FAN SPEED appropriate?
For details on FAN SPEED, refer to FAN SPEED of
SERVICE in the OPTION menu. If the projector is
used with a wrong setting, it may cause damage to the
projector itself or the parts inside.
A note of precaution when cleaning the air filter.
Please immediately turn the power off and clean or change
the air filter referring to the Cleaning and replacing the
air filter section of this manual. After you have cleaned or
changed the air filter, please be sure to reset the filter timer.

The button operation is not available.

34
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-12 Regarding the indicator lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings
as described in the table below. Please respond in accordance with the instructions within the table.
POWER LAMP TEMP
Description
indicator indicator indicator
Lighting Turned Turned
The projector is in a standby state.
In Orange off off
Blinking The projector is warming up.
Turned off Turned off
In Green Please wait.
Lighting The projector is in an on state.
Turned off Turned off
In Green Ordinary operations may be performed.
Blinking The projector is cooling down.
Turned off Turned off
In Orange Please wait.
The projector is cooling down. A certain error has been detected.
Blinking (discre- (discre-
Please wait until the POWER indicator finishes blinking, and then perform the proper measure
In Red tionary) tionary)
using the item descriptions below.
Projector has detected LAMP ERROR.
The lamp does not light, and there is a possibility that interior portion has become heated.
Please turn the power off, and allow the projector to cool down at least 20 minutes.After the
Blinking
projector has sufficiently cooled down, please make confirmation of the following items, and then
In Red
Lighting turn the power on again.
or Turned off
In Red • Is there blockage of the air passage aperture?
Lighting
• Is the air filter dirty?
In Red
• Does the peripheral temperature exceed 35ºC?
If the same indication is displayed after the remedy, please change the lamp referring to the
section “Lamp”.
Blinking Projector has detected LAMP DOOR ERROR.
In Red The lamp cover has not been properly fixed (attached).
Blinking
or Turned off Please turn the power off, and allow the unit to cool down at least 45 minutes. After the projector
In Red
Lighting has sufficiently cooled down, please make confirmation of the attachment state of the lamp
In Red cover. After performing any needed maintenance, turn the power on again.
Projector has detected FAN ERROR.
Blinking
The cooling fan is not operating.
In Red
Blinking Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector
or Turned off
In Red has sufficiently cooled down, please make confirmation that no foreign matter has become
Lighting
caught in the fan, etc., and then turn the power on again.
In Red
If the same indication is displayed after the remedy, please replace a fan.
Projector has detected TEMPERATURE ERROR.
There is a possibility that the interior portion has become heated.
Please turn the power off, and allow the unit to cool down at least 20 minutes. After the projector
Blinking has sufficiently cooled down, please make confirmation of the following items, and then turn the
In Red power on again.
Lighting
or Turned off • Is there blockage of the air passage aperture?
In Red
Lighting • Is the air filter dirty?
In Red • Does the peripheral temperature exceed 35°C?
• Is the setting for FAN SPEED appropriate?
For details on FAN SPEED, refer to FAN SPEED of SERVICE in the OPTION menu. If the projector
is used with a wrong setting, it may cause damage to the projector itself or the parts inside.
There is a possibility that the interior portion has become overcooled.
Please use the unit within the usage temperature parameters (5°C to 35°C). After the treatment,
Lighting Alternative
resent the power to ON. If the same indication is displayed after the treatment, please make
In Green blinking in Red
sure that the proper cables are connected to each of connectors EW31 and EW32 on the PWB
assembly MAIN.
It is time to clean the air filter.
Lighting Simultaneous Please immediately turn the power OFF, and clean or change the air filter referring to the section
In Green blinking in Red “Air Filter”. After cleaning or changing the air filter, please be sure to reset the filter timer. After
the remedy, resent the power to ON.
Blinking In
Green for Turned Turned At least 1 Power ON schedule is saved to the projector.
approx. 3 off off Please refer to "Schedule Settings" section of User’s Manual - Network Guide.
seconds.

NOTE •When the interior portion has become overheated, for safety purposes, the projector is automati-
cally shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord,
and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of
the attachment state of the lamp and lamp cover, and then turn the power on again. If the projector is used
at an altitude of about 1600 m or higher, set FAN SPEED of the SERVICE item in the OPTION menu to
HIGH. Otherwise, set it to NORMAL.

35
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-13 HIDDEN SERVICE MENU

To display the OSD for “HIDDEN SERVICE MENU” set up.
By the control panel By the remote control transmitter
1. Display the Advanced menu by 1. Display the menu by the
the “MENU” button.(If EASY “MENU” button. (If EASY
MENU appears, choose “Go to MENU appears, choose “Go to
Advanced menu” to display Advanced menu” to display
ADVANCED MENU.) ADVANCED MENU.)
2. Select the “OPTION” on the 2. Select the “OPTION” on the menu.
menu. 3. Press the “MAGNIFY OFF”
3. Continue press the button [ ] button.
first, then press the button [ ] Next hold the “MAGNIFY OFF”
together with “INPUT”, and hold button for 3 seconds.
for 3 seconds.

STARTUP TYPE
Select the startup screen type. 1 : shows Hitachi Logo 2 : No Hitachi Logo
PANEL TIME
Use time of LCD panel. Reset the PANEL TIME whenever you changed the LCD/LENS prism assembly panel.
LONG KEY
You can select the remote control button operation mode. NORMAR ↔ LONG
The LONG allows to control the projector with the remote control unit when you hold a button of it for about 3seconds,
and makes MY BUTTON 1/2 function as LONG KEY DISABLE/LONG KEY ENABLE compulsorily. If you use
these buttons to control the projector as you assigned with the MY BUTTON menu, set to the NORMAL.
IRIS
Enables the active iris sensitivity adjustment.
ERROR RECOVERY
OFF : You need to unplug the projector’s power cord to get back from the standby state with an alert of
LAMP ERRROR or TEMPERATURE ERROR.
ON : You can get back the projector from the standby state with an alert of LAMP ERRROR or TEMPER-
ATURE ERROR by holding the STANDBY/ON button for about 3seconds. Unplug the projector’s power
cord when this operation becomes ineffective.
NETWORK RESET
If this is executed, all of the network settings are initialized.
SOFT RESET
If this is executed, all of the user data is initialized. Never use it when not required.

6-14 RUN TIME window

Set operating time display method (accumulated lamp time display method)
1. Select “ OPTION” from the Advanced menu, then place the cursor on the “LAMP TIME”.
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or
more to display the screen shown below. (The menu will close after 10 seconds if there are no further
operations.)
4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.)

← Lamp time
Usage status number
← Lamp time (NORMAL) 0 ..... Total usage status
← Lamp time (ECO)
← AC energizing time 1 ..... Current usage status
← Number of times on
← Number of times off
2 ..... Usage status before first reset
← Usage status number 3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset

36
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-15 DIGITAL CONVERGENCE adjustment

Preparation
1. Open the ADVANCED MENU and select OPTION → SERVICE → GHOST, and then press the ► (right)
or the ENTER button to display the SERVICE_GOHST box.

2. While the RETURN is highlighted, operate the keypad or the remote control as follows. The DIGINAL
CONVERGENCE box will appear.
Keypad
Press the ▼ (down) button, and then hold the ▼ (down) button together with INPUT button for about
3seconds.
Remote control
Press the MAGNIFY OFF button, and then hold the MAGNIFY OFF button for about 3seconds.

3. Align the blue/red image with the green image using HR and HB.
HR shifts the red image to the left/right.
HB shifts the blue image to the left/right.

37
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6-16 Reset of the Network Web password / User ID, Network Control password

ATTENTION : Performing this operation initializes the network settings. If the projector has
the customized settings in the network, make a note of the network settings to restore
them before this operation.

1. Display the WIRED SETUP in the NETWORK menu.

2. Select “TURN OFF” in the item of

DHCP.

3. Enter “255.255.255.255” in the item of

IP ADDRESS.

4. Enter “255.255.255.255” in the item of

SUBNET MASK.

5. Enter “255.255.255.255” in the item of

DEFAULT GATEWAY.

6. While NETWORK on the left column is highlighted, press the RESET button of the
remote control.

Press RESET button

7. Select OK, and press ► button to execute reset.

The operation described above resets not only Web password but also NETWORK settings.
NOTE:
When you execute this reset operation with any other settings than above (described in the
step 2 to 5), the WEB password, SNTP server address, DATE AND TIME and other sched-
ule settings are not initialized, but the network settings (DHCP, IP ADDRESS, SUBNET
MASK and DEFAULT GATEWAY) are initialized.
8. If the network settings had been customized, restore them by manual operation.

38
 7. Wiring diagram
Wiring of power supply block 1

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Attach CNTS and CNGD1
(2) Attach FE1 to CNPFC
(3) Attach FE2 to CNPW

FE1 CNGD1 FE2

Attach the ferrite core FE1 to the CNPFC cable that Fasten the end of CNGD1 to the Attach the ferrite core
connects the POWER UNIT CIRCUIT and the POWER Power metal with the screw. FE2 to the CNPW
UNIT BALLAST, so that the FE1 is placed between the cable. Be sure to lock
housing and the cable tie, and so that the projection is the claw.
placed in the housing side. Be sure to lock the claw.

FE2
Cable
tie
39

CNPW

FE1

Housing
Projection

TSW CNTS
Check the marking of TSW. Connect CNTS
(cable of TSW) here.
UP62 UCHIYA 95C

Wiring diagram 1
 Wiring of power supply block 2

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Connect CNLAP and CNBAR
(2) Connect CNPFC
(3) Wire CNBAR Connect the CNBAR
here until it clicks.

CNLAP CNBAR

Confirm the tape has been

wound in proper position.

60 to 70mm 30mm or more POWER UNIT BALLAST

Wire the CNBAR
Connect the CNLAP here until it clicks. Do not pass it under the
insulating sheet here.
Do not let it loosened here.
40

Connecting POWER UNIT CIRCUIT with POEWR UNIT BALLAST, and attaching the insulating sheet
Pass the CNPFC wires through the hole of Pass the CNBAR
POWER UNIT CIRCUIT through this hole.
insulating sheet when putting the sheet over
POWER UNIT BALLAST the POWER UNIT BALLAST.

Insulating
sheet Insulating sheet

BALLAST HOLDER
Connect the CNPFC of the POWER UNIT
CIRCUIT to the POWER UNIT BALLAST until
it clicks. Fasten the insulating sheet with 2 screws.

Wiring diagram 2
 Wiring of power supply block 3

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Wire CNTS, CNLAP and CNGD1
(2) Secure CNTS and CNBAR

View from front side Confirm that the CNBAR is passing

through the opening area of the insulating
sheet and that it is not loosened here.
This work is important to keep the CNBAR apart
from the primary parts.
To maintain the clearance distance for insulation,
make wiring so that any cables are not loosened
CNBAR Bend the CNPFC to the inside of the inside the power supply block.
power supply block so that he CNPFC
cannot touch the metallic casing (power
shield metal) attached in later process.

CNPFC
Pass the CNTS and the
CNBAR through this hook to Power Supply Block
41

View from rear side secure them. Put the CNBAR

Pass the hole of the insulating sheet. prior to CNTS so that the
CNBAR will not come off.
CNGD1
Power Unit Ballast CNBAR

CNPW

CNPW Pass the CNTS and the CNTS

Power CNPW through this hole.
Unit
Circuit
Pass the CNTS through this hook.
Pass the CNBAR and the CNGD1
Make sure not to pinch any wires of CNPW Do not make a slack of CNLAP here through the hole here.
when assembling the power supply block. in order to prevent it from touching to
Make sure the FE2 attached to the CNPW is the transfer of the POWER UNIT
inside of the power supply block. CIRCUIT.
Wiring diagram 3
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
Wiring around panel duct 1 Cable tie CNFL2
(1) Wire # 3000, #3010, #3020 CNFL2
(2) Wire CNFL2 and E1 PANEL
95 to 105mm FE23 DUCT
Put the #3010 (RG panel fan) and the #3020 SENSO
(B panel fan) to the bottom case. Pass the end (far from cable tie) R board
of CNFL2 through the hole of
Stick tapes (L=20mm) at about 50mm away
Hook the PANEL DUCT from its
from the hook in order to attach the cables to
underside to outside.
casing of eac fan. Ferrite core
Then, connect the END-A of
CNFL2 to the SENSOR board. FE23 Cable tie

Cable tie FE24 #3010 PANEL DUCT (Underside)

E1
#3000
L=50r10mm
L=15r5mm
Hook
42

#3020
Fasten the E1 (Thermistor)
underneath the PANEL DUCT
with a screw.

Attach the ferrite core FE24 to

the #3020 firmly. Make sure to
lock the claw.

Tie up the wires of #3000

with a tape ZTP3.

CNFL2

L=30r5mm

Fix the wires of #3010 and #3020 into these slits. Attach the SENSOR board to the outside of PANEL DUCT,
Do not let them loosened in order to prevent the and wire CNFL2 cable to the back side of PANEL DUCT.
wires pinched into the DC fans themselves. L=50r5mm
Pass CNFL2 cable through the slits pointed by the arrows.

Wiring diagram 4
 Wiring around panel duct 2

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Wire and secure CNFL2 and CNBAT
(2) Confirm FE23

CNFL2
Confirm that the ferrite core FE23 has been
attached to CNFL2.
Place the FE23 as close to the rib as possible in
Rib order to prevent it from touching the optical unit in
later process.
Fix the wires to the rib so that the FE23 cannot be
apart form the duct.

SENSOR board
Attach the #3000 cable to
the duct with a tape ZTP6. FE23
43

Attach the CNFL2 and CNBAT cables to the duct

with a tape ZTP4.
Do not stick the tape ZTP4 on the ventilating holes
of the panel duct and the edges of the ventilating
holes, or the bosses with the screw hole.

Do not let the wires loosened in this area.

Do not pass the wires over the boss.
Do not let the wires loosened in this area. Ventilating holes
Do not pass the wires over the boss. of PANEL DUCT

Wiring diagram 5
 Wiring around panel duct 3

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Wire and secure #3010, #3020, CNRC and E1
Put the CNRC into the gap
(2) Confirm FE20
between pins on the lens
side to fix the wires.
Secure the cables to these Put the E1 into the gap
hooks and pins. between pins on the
opposite side to the lens to
fix the wires.

E1

CNRC
Fix the #3020 to the side of
PANEL DUCT with a tape in
order to keep it away from
the CNRC and the E1.
44

#3020

#3020
Do not let the #3020 and E1 cable
Do not let the #3010 cable loosened in this area. Let the CNRC
loosened in this area. loosened a little. Make sure to cofirm the ferrite core FE20 has
been attached to the harness of #3020 facing its
projection upwards.

Wiring diagram 6
 Wiring around lamp house

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Attach and wire CNTS and CNLAP
(2) Attach FE10
Secure the CNTS (cable of TSW) with a screw.

Secure the CNLAP with a screw.

45

CNLAP

CNTS

Pass the CNTS behind the CNLAP, and style them so Push the CNLAP and Cross section
that they do not protrude from the bottom case. the CNTS behind the The wires might
ribs. Otherwise, the be damaged.
Boss
cables will be pinched Rib
Confirm the ferrite core The boss of the upper case between the upper
FE10 is located here. will come to this area. case and the bottom
If it has been detached, case.
re-attach it to only the CNLAP with
its projection upwards. Make sure
not to attach it to the CNTS. NG GOOD
Wire the CNTS and the CNLAP so that they
do not protrude from the yellow broken line If you put two wires side by
drawn on the picture to the right side, since side, they might be pinched
Place the ferrite core FE10 on and damaged. Therefore, put
the boss of the bottom case. the boss will come to the area shown on the
picture when you attach the upper case. a wire upon another as
shown in the diagram.
Screw
Wiring diagram 7
 Wiring of MAIN board, INPUT board and RGB board

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Connect CNAUD, CNVID, CNRGB and CNUAR
(2) Attach shading sheet
Put wires of CNVID and CNAUD near the I/O PANEL. Otherwise, they will
Confirm that ferrite cores and a tape
push the shading sheet and it can cause the insulating sheet dropping.
are attached in place properly.
Confirm that the claws of ferrite cores INPUT board
are closed firmly and that any wires are not
pinched into the ferrite cores.
CNVID CNVID

CNRGB Cable tie

CNAUD
15 to 25mm
CNUAR Tape Ԙ Connect the ԙ Connect the
CNVID first. CNAUD.
MAIN board
No wires are seen here.
46

RGB board
Connect the
CNAUD INPUT board CNRGB.
CNUAR
RGB board Connect the CNUAR. CNRGB
CNVID Make sure to connect
the end covered with the tape
to the IMPUT board.

Shading sheet 1 2
MAIN board
Ԙ Place the ferrite core FE22 between
the INPUT board and the shading sheet. Hook the claw of the shading sheet to the metallic Make sure to place the ferrite core’s
ԙ Pass the CNAUD and the CNVID part of the component video terminal block when cable tie in the RGB board side.
under the flap of the shading sheet here. attaching the shading sheet.

Wiring diagram 8
 Wiring around main board 1

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Connect #3010, #3030, CNBAR, CNBAT, CNIR and CNPW
(2) Fasten CNGD1

Before attaching MAIN board IRIS UNIT

Pass the CNIR (harness of
IRIS UNIT) on the POWER LCD Prism
UNIT block side of this boss so Assembly
that the IRIS cable will not
pinched between this boss and
the main board. Boss

IRIS Fasten the CNGD1 and the

POWER UNIT Projection EARTH METAL to the I/O
cable
block Lens Do not pass the CNGD1 and the METAL with a screw.
CNBAR over the pins to prevent
them from being pinched by the Pay attention not pinch
Connect the #3010. UPPER CASE. any wires in attaching
Pass the #3030 cable
the EARTH METAL and
47

into this claw here. Connect the CNBAR Do not let the CNBAR and the F-GUARD METAL.
CNPW until it clicks. the CNTS loosened.
Exhaust fan Connect the Connect the CNPW.
EARTH METAL Cross the CNBAR and
(#3030) IRIS cable.
F-GUARD METAL #3010 over the CNPW
Connect the here.
#3030.

#3010 CNGD1
Pass the CNBAR, CNTS and Boss
Do not pass the CNGD1 into this Cross the CNGD1, the
#3030 through this hook. hook since the wire could be CNBAR, the #3010 and the
Put the CNTS into the hook ZTP5
damaged. #3030 under the CNPW.
last to prevent the CNBAR and
#3030 from coming off. If these cable wires are loosened in this area, put their excessive lengths
Pass the #3010 between the boss and the POWER UNIT block, and then under the main board. Otherwise, the wires might be pinched into the
fasten it with a tape.ZTP5 in order not be pinched into the UPPER CASE. upper case and damaged when the upper case is attached.

Wiring diagram 9
 Wiring around MAIN board 2

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

(1) Connect the speaker cables and the #3000 (LAMP FAN cable)
(2) Connect #3020, CNRC, CNFL2 and E1
(3) Connect panel flexible cables Don’t pass the speaker cable
through the inside of speaker.
Connect the speaker A84.
Connect the
speaker A83. Connect the #3000.

Put the excessive lengths of the speaker and

#3000 cables under the main board.

Slide the stopper to fasten the panel flexible

cable after inserting the cable surely.
48

Speaker A83 Speaker A84

Put the excessive lengths of
Connect #3020. Connect E1. cables on the main board.

Connect CFL2. Connect CNRC.

Insert until it clicks.

NG OK
Put the excessive lengths of
harnesses under the main board. Close the stopper to fasten the panel flexible
cables after inserting the cables surely.

Wiring diagram 10
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

8. Disassembly diagram
Remove UPPER CASE / PWB assembly MAIN

1 33 PWB assembly MAIN

3 6
Terminal

25 2 12
16

15

29 reverse side

14

18 17

Remove LAMP / DICHROIC OPTICS UNIT / LENS / SPEAKER

31
26
11
32

27
28

21
Continued on next page

49
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Remove PANEL DUCT / FAN / FILTER

Remove POWER UNIT BLOCK / FOOT

30 22

10
8
8
7
4

5
13
5
24
Remove POWER UNIT BALLAST / CIRCUIT

23

Remove DUCT / FAN

9 19

20

50
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Notice
■ Detach and attach the upper case.
Follow the procedure below to detach and attach the upper case.

When disassembling
a. Remove the Lamp door.

CAUTION
The lamp door must be removed before the upper case when disassembling the machine. If the upper
case is detached with the lamp door installed, the MAIN board might be damaged.

Lamp door

Loosen this screw

b. Remove 8 screws on the bottom and 2 screws on the rear to detach the upper case.

CAUTION
This is not a screw hole. Do NOT insert a screw or screwdriver into it to avoid damaging the inside.

2 screws

8 screws

51
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

When assembling
a. Tighten 8 screws on the bottom and 2 screws on the rear after attaching the upper case with the lamp
door separated.

CAUTION
This is not a screw hole. Do NOT insert a screw
or screwdriver into it to avoid damaging the in-
side.

In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing
down the upper case in the direction of the arrow. Be careful not to bend the outside casing.(Torque:0.39-
0.59N•m)

2 screws

b. Attach the Lamp door.

Lamp door

CAUTION
Tighten this screw using a manual screwdriver.

52
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ Detaching the MAIN board or INPUT board.

1. Remove screws from MAIN board and rear panel.

Remove these screws

Remove these screws

Flexible cables of LCD panel

CAUTION

Never swing the

screwdriver while
you loosen this
screw. Otherwise,
the I/O metal will
change.

2. Detach the MAIN / INPUT board block, and separate the MAIN board or the INPUT board from the block.

CAUTION
When you detach and attach the main/input Main board
board block, move the block along the rear
panel of the bottom case so that the optical Dichroic
unit or its plastic sheet will not catch the input optics unit Rear panel of
board. BOTTOM CASE
Otherwise, the optical unit might be damaged ( cross section)
and it might cause the light leakage from the Plastic sheet
outer casing. Input board

53
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ MAIN board, INPUT board and RGB board

View from the side
Note that the MAIN board is attached to the I/O metal with the MAIN board
INPUT board and the RGB boar. They all are removed from the
projector together. (See the picture on the right.) RGB board
When you detach this block from the projector, lift the side of the
MAIN board while sliding it as shown in the picture so that the I/O metal
INPUT board cannot be caught by the optical unit.
INPUT board

PWB assembly MAIN

Optical unit

Outline of
Crash
optical unit

I/O panel (Terminals) PWB assembly INPUT

Attach the MAIN board in reverse way of the disassembly procedure above so that the INPUT
board cannot be caught by the optical unit when assembling the projector.

I/O COVER
When you attach the I/O cover, insert its claws to the slits of I/O METAL as shown by black arrows
in the drawing, and lock them. Inserting two claws on the lower side first makes this work easy.
Confirm that two bosses of the I/O COVER are fixed in each holes of I/O METAL as shown by
white arrows in the drawing. Make sure that the I/O COVER is contact with the I/O METAL tightly.

I/O METAL

I/O COVER
Bosses (on the
reverse side)

54
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ Attaching the MAIN and INPUT boards.

Assemble in reverse order of the disassembling procedure described in the last section.
Use specified type of screws when re-assemblimg.

Fasten the F-guard earth metal and the

earth metal with the screw (T3x12).

F-guard
Earth metal

Rib
(lamp house)

Fan guard

Attach the F-guard earth metal so that

the fan guard and the rib of the lamp
house come into the part of the F-guard
earth metal directed by the arrow.

T3x12 screw

Earth metal

CNGD1 cable

MAIN board
M4x8

CAUTION
Fasten the main
board, the earth metal
and the CNGD1 cable
with this screw.
Never swing the
screwdriver while you
tighten this screw.
Otherwise, the I/O
metal will change.

55
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ Attaching/detaching the LCD prism assembly or the IRIS unit.

CAUTION
Please handle the LCD prism assembly with care in order not to make the convergence worse.

LCD priism assembly

Remove/tighten three screws. Never let the screw driver touch the LCD prism assembly when you
attach/detach the LCD prism assembly.

Pinch the projection of a top of the LCD prism

assembly tightly and lift it up carefully when
removing it.
Never let the LCD prism assembly touch any other
parts.

Screws for Screws for IRIS unit

LCD prism
assembly

IRIS unit
When you remove the iris unit,
1. Remove two screws
2. Hold the plastic part of the iris unit (shading part shown in the diagram above), and lift it up straight
so that the movable parts of the iris unit will not scratch the optical parts of the dichroic optics unit.

When you install the iris unit,

1. Hold the plastic part of the iris unit, and attach it to the dichroic optics unit.
Make sure not to set the iris unit in wrong direction.
2. Tighten two screws

CAUTION
Never hold the movable parts of the iris unit
when you handle the iris unit.

Movable parts

56
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ Dichroic Optics Unit and Lens Assembly replacement

CAUTION
• Do not touch lens or glass parts of the LCD panels and optical filters. (See the chapter “6-3 Cleaning
the dust off the panels and the optical filters”.
• Do not loosen screws with which the lens assebmly is fastened to the dichroic optics unit except
when you replace them. Oterwise, spacers between the lens assembly and dichroic optics unit may
shift or come off, and it may make optical performance worse. (The number of spacers and their
position are different in each projector.)
• Take care separated spacers or hexagonal nuts may not damage the optical parts, while you do
these works.

Dichroic Optics Unit replacement

Disassembly procedure Spacer

1) Stand the optical unit on the flat and stable place
with the lens side upwards. And then, loosen and
remove 4 screws of the lens assembly shown in
the drawing.
2) Lift the lens assembly to separate it from dichroic
optics unit. Do this word carefully not to shift or
drop any spacers.
NOTE: In some case, spacers may come off with
lens assembly.
3) Draw sketches of each spacer in their position
and direction so that you can re-attach them to the
optical unit as they are in assembly.

Assembly procedure
1) Attach the LCD prism assembly to the new dichroic optics unit.
2) Stand the dichroic optics unit on the flat and stable place with the lens side upwards, and put
all the spacers on the dichroic optics unit as they were.
3) Put the lens assembly onto the dichroic optics unit. Insert 4 screws into their screw holes, and
then align the spacers.
4) Fasten the lens assembly with 4 screws as follows.
1st: Tighten 4 screws lightly. (Torque: 0.1N•m)
2nd: Tighten 4 screws firmly. (Torque: 0.25N•m, 0.30N•m (max.))
5) Check any spacers do not protrude from the optical unit before you complete re-assembling
the optical unit.

Lens Assembly replacement

Disassembly procedure
Loosen and remove 4 screws, and detach the lens assembly and spacers.

Assembly procedure
Put the new lens prism assembly onto the dichroic optics unit, and fasten with 4screws.
(Torque: 0.25N•m, 0.30N•m (max.))
ATTENTION: Do not put back the spacers removed in disassembly to the optical unit.

57
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ Power unit block

1. Attachching / Detaching the power unit block.

Power unit block

Screw AC inlet Screw (Insert into the

screw hole straight.)

Put the power shield metal inside the bottom case when
attaching the power unit block to the bottom case.

Power shield metal

Bottom case
AC inlet

2. Secure the power shield metal with 4 screws.

4 screws
(M3x6)

WARNING
Make sure to use the original screw. This
work is very important on the product safety. If
you use the longer screw than the original,
the screw might touch the electric parts inside
the power unit and short circuit or dielectric
breakdown would be caused.

3. Replacement of Ballast power unit

1) Attaching the insulating sheet
Insert the end of the insulatng sheet into the hole of the circuit board before you attach the Ballast
Power Unit to the Ballast Holder.

Ballast Power unit

Insulating sheet

58
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

2) Attach the Ballast Power Unit to the Ballast Holder.

Slide and insert the Ballast Power Ballast Power Unit

Unit into the Ballast Holder so that
two corners of the circuit board are
held in the rib firmly.

Confirm that both corners of

the circuit board are put in
place as shown.

3) Fasten the Ballast Power Unit to the Ballast Holder with a screw.

ATTENTION: Placeside
View from opposite the insulating
Place thesheet between
insulating the
sheet
behind the rib of the Ballast
Ballast Holder and the Power Unit (Ballast) here.
Holder.
Rib
GOOD NG
Screw

4) Fasten the insulating sheet to the Ballast Holder with 2 screws.

(Refer the chapter “Wiring diagram”.)

4. Replacement of circuit power unit

When you replace the power unit (circuit), be sure to remove the ferrite core from the original power
unit (circuit) and attach to a new one.
Follow the instruction on page 39 because this assembling and wiring works are important for prod-
uct safety.

59
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

■ Panel duct.
Follow the procedure below to detach panel duct.

Detaching the panel duct.

When you detach the panel duct from the bottom case, unlock the 6 hooks shown in the diagram.

At this point, the rib near the

hook makes the work hard.
Rib Therefore, use a tool like a
screwdriver to unhook it.

Panel duct

Attaching the panel duct.

Before attaching the panel duct to the bottom case, style the cable of the PWB assembly
SENSOR as shown in the picture in order not to pinch the wires of the cable.
(1) Insert the cable leading from the PWB assembly SENSOR attached to the panel duct to the
end of the slit.
(2) Secure the cable to the lib temporally.

PWB assembly
(2) SENSOR

(1)

60
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

9. Replacement Parts list

[ CP-X2514WN ]

THE UPDATED PARTS LIST

FOR THIS MODEL IS

AVAILABLE ON ESTA

MY SOURCE/
VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME

UP
ON

DOWN
OFF

KEYSTONE MY BUTTON MUTE

1 2

POSITION MENU

ENTER

ESC RESET

A B C D

61
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

[ CP-X3014WN ]

THE UPDATED PARTS LIST

FOR THIS MODEL IS

AVAILABLE ON ESTA

MY SOURCE/
VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME

UP
ON

DOWN
OFF

KEYSTONE MY BUTTON MUTE

1 2

POSITION MENU

ENTER

ESC RESET

A B C D

62
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

[ CP-X4014WN ]

THE UPDATED PARTS LIST

FOR THIS MODEL IS

AVAILABLE ON ESTA

MY SOURCE/
VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME

UP
ON

DOWN
OFF

KEYSTONE MY BUTTON MUTE

1 2

POSITION MENU

ENTER

ESC RESET

A B C D

63
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

[ CP-WX3014WN ]

THE UPDATED PARTS LIST

FOR THIS MODEL IS

AVAILABLE ON ESTA

MY SOURCE/
VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME

UP
ON

DOWN
OFF

KEYSTONE MY BUTTON MUTE

1 2

POSITION MENU

ENTER

ESC RESET

A B C D

64
 10. RS-232C communication

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

RS-232C Communication RS-232C Communication (continued)

RS-232C Communication
Communicaion settings
When the projector connects to the computer by RS-232C communication, the
1. Protocol
projector can be controlled with RS-232C commands from the computer.
19200bps,8N1
For details of RS-232C commands, refer to RS-232C Communication / Network
command table. 2. Command format ("h" shows hexadecimal)
Byte Number 0 1 2 3 4 5 6 7 8 9 10 11 12
Connection
Command Header Data
1. Turn off the projector and the computer. Header Data CRC
Action Type Setting
code Packet size flag code
2. Connect the projector's CONTROL port and the computer's RS-232C port
with a RS-232C cable (cross). Use the cable that fulfills the specification Action L H L H L H L H L H L H
shown in figure <SET>Change setting to
Turn the computer on, and after the computer has started up turn the projector desired value [(cL)(cH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH)
3. on. by [(eL)(eH)].
Set the COMMUNICATION TYPE to OFF. <GET>Read projector
4. internal setup value [(bL)
(bH)] .
(aL) (aH) 02h 00h (bL) (bH) 00h 00h

<INCREMENT>
BEh EFh 03h 06h 00h
Increment setup value (aL) (aH) 04h 00h (bL) (bH) 00h 00h
[(bL)(bH)] by 1.
65

RS-232C CONTROL <DECREMENT>

Decrement setup value (aL) (aH) 05h 00h (bL) (bH) 00h 00h
[(bL)(bH)] by 1.
<EXECUTE> Run a
(aL) (aH) 06h 00h (bL) (bH) 00h 00h
command [(bL)(bH)].
[Header code] [Packet] [Data size]
Set [BEh, EFh, 03h, 06h, 00h] to byte number 0 ~ 4.
RS-232C Cable [CRC flag]
(cross)
For byte number 5, 6, refer to RS-232C Communication / Network command
RS-232C port CONTROL port table.
of the computer of the projector [Action]
Set functional code to byte number 7, 8.
<SET> = [01h, 00h], <GET> = [02h, 00h], <INCREMENT> = [04h, 00h]
<DECREMENT> = [05h, 00h], <EXECUTE> = [06h, 00h]
CD (1) (1) Refer to the Communication command table.
RD(2) (2) RD [Type] [Setting code]
TD (3) (3) TD For byte number 9 12, refer to RS-232C Communication / Network command
DTR (4) (4) table.
GND (5) (5) GND
DSR (6) (6)
RTS (7) (7) RTS
DTS (8) (8) CTS
RI (9) (9)
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication (continued) Command Control via the Network

Command Control via the Network

3. Response code / Error code ("h" shows hexadecimal)
(1) ACK reply : 06h When the projector connects network, the projector can be controlled with RS-
When the projector receives the Set, Increment, Decrement or Execute 232C commands from the computer with web browser.
command correctly, the projector changes the setting data for the specified For details of RS-232C commands, refer to RS-232C Communication / Network
item by [Type], and it returns the code. command table.
(2) NAK reply : 15h
When the projector cannot understand the received command, the projector NOTE • If data is transferred via wireless and wired LAN at the same time,
returns the error code. the projector may not be able to process the data correctly.
In such a case, check the sending code and send the same command again.
(3) Error reply : 1Ch + 0000h
When the projector cannot execute the received command for any reasons, Connection
the projector returns the error code.
In such a case, check the sending code and the setting status of the projector.
(4) Data reply : 1Dh + xxxxh 1. Turn off the projector and the computer.
When the projector receives the GET command correctly, the projector returns
the responce code and 2 bytes of data. 2. IfLAN
you use wired LAN, connect the projector's LAN port to the computer's
port with a LAN cable. Use the cable that fulfills the specification shown
in figure. If you use wireless LAN, insert the USB wireless adapter into the
NOTE • For connecting the projector to your devices, please read the projector's USB TYPE A port.
manual for each devices, and connect them correctly with suitable cables. Turn the computer on, and after the computer has started up turn the
• Operation cannot be guaranteed when the projector receives an undefined 3. projector on.
66

command or data.
• Provide an interval of at least 40ms between the response code and any other LAN cable (CAT-5 or greater)
code.
• The projector outputs test data when the power supply is switched ON, and
when the lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
• When the data length is greater than indicated by the data length code, the LAN
projector ignore the excess data code. Conversely when the data length is LAN
shorter than indicated by the data length code, the projector returns the error
code to the computer.
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
Command Control via the Network (continued) Command Control via the Network (continued)

Communicaion Port Command control settings

The following two ports are assigned for the command control. [TCP #23]
TCP #23 1. Command format
TCP #9715 Same as RS-232C communication, refer to RS-232C Communicaton command format.
2. Response code / Error code ("h" shows hexadecimal)
Configure the following items form a web browser when command control is used. Four of the response / error code used for TCP#23 are the same as RS-232C
Port Settings Communication (1)~(4). One authentication error reply (5) is added.
Click the [Enable] check box to open [Network
(1) ACK reply : 06h
Port open Control Port1 (Port: 23)] to use TCP #23. Refer to RS-232C communication.
Default setting is “Enable”. (2) NAK reoly : 15h
Network Control Refer to RS-232C communication.
Port1 (Port: 23) Click the [Enable] check box for the
[Authentication] setting when authentication (3) Error reply : 1Ch + 0000h
Authentication
is required. Refer to RS-232C communication.
Default setting is “Disable”. (4) Data reply : 1Dh + xxxxh
Click the [Enable] check box to open [Network Refer to RS-232C communication.
Control Port2 (Port: 9715)] to use TCP (5) Authentication error reply : 1Fh + 0400h
Port open
#9715.
Default setting is “Enable”.
When authentication error occurred, the projector returns the error code.
Network Control
Port2 (Port: 9715) Click the [Enable] check box for the [TCP #9715]
67

[Authentication] setting when authentication 1. Command format

Authentication
is required.
Default setting is “Enable”. The commands some datum are added to the head and the end of the ones of
TCP#9715 are used.
Header Data length RS-232C command Check sum Connection ID

When the authentication setting is enabled, the following settings are required. 0×02 0×0D 13 bytes 1 byte 1 byte

Security Settings [Header]

02, Fixed
Authentication Enter the desired authentication password.
Password [Data Length]
ConfirmThis setting will be the same for
Network Control [Network Control Port1 (Port: 23)] and
RS-232C commands byte length (0×0D, Fixed)
Re-enter
Authentication [Network Control Port2 (Port: 9715)]. [RS-232C commands]
Password Default setting is blank. Refer to RS-232C Communication command format.
[Check Sum]
This is the value to make zero on the addition of the lower 8 bits from the header
to the checksum.
[Connection ID]
Random value from 0 to 255 (This value is attached to the reply data).

NOTE • Operation cannot be guaranteed when the projector receives an

undefined command or data.
• Provide an interval of at least 40ms between the response code and any other
code.
• Commands are not accepted during warm-up.
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
Command Control via the Network (continued) Network Bridge Communication

Network Bridge Communication

2. Response code / Error code ("h" shows hexadecimal)
The connection ID is attached for the TCP#23's response / error codes are This projector is equipped with NETWORK BRIDGE function.
used. The connection ID is same as the sending command format. When the projector connects to the computer by wired or wireles LAN
(1) ACK reply : 06h + ××h (××h : connection ID) communicaton, an external device that is connected with this projector by RS-
(2) NAK reoly : 15h + ××h 232C communication can be controlled from the computer as a network terminal.
(3) Error reply : 1Ch + 0000h + ××h
(4) Data reply : 1Dh + xxxxh + ××h
NOTE • If data is transferred via wireless and wired LAN at the same time,
(5) Authentication error reply : 1Fh + 0400h + ××h the projector may not be able to process the data correctly.
(6) Projector busy reply: 1Fh + ××××h + ××h
When the projector is too busy to receives the command ,the projector
returens the error code. Connection
In such a case, check the sending code and send the same command again.
Automatic Connection Break 1. Ifportyouwith
use wired LAN, connect the computer's LAN port and the projector's LAN
a LAN cable. Use the cable that fulfills the specification shown in figure.
The TCP connection will be automatically disconnected after there is no If you use wireless LAN, insert the USB wireless adapter into the projector's LAN port.
communication for 30 seconds after being established. Connect the projector's CONTROL port and the RS-232C port of the devices
2. that you want to control with a RS-232C cable.
Authentication Turn the computer on, and after the computer has started up turn the
The projector does not accept commands without authentication success 3. projector on.
when authentication is enabled. The projector uses a challenge response type Set the COMMUNICATION TYPE to NETWORK BRIDGE.
68

authentication with an MD5 (Message Digest 5) algorithm. When the projector is 4.

using a LAN, a random 8 bytes will be returned if authentication is enabled. Bind
this received 8 bytes and the authentication password and digest this data with
the MD5 algorithm and add this in front of the commands to send.
Following is a sample if the authentication password is set to “password” and the
random 8 bytes are “a572f60c”.
1) Select the projector. LAN
2) Receive the random 8 bytes “a572f60c” from the projector.
3) Bind the random 8 bytes “a572f60c” and the authentication password
“password” and it becomes “a572f60cpassword”.
4) Digest this bind “a572f60cpassword” with MD5 algorithm. LAN cable
It will be “e3d97429adffa11bce1f7275813d4bde”. (CAT-5 or greater)

5) Add this “e3d97429adffa11bce1f7275813d4bde” in front of the commands and

send the data.
Send “e3d97429adffa11bce1f7275813d4bde”+command.
6) When the sending data is correct, the command will be performed and the
CONTROL LAN RS-232C
reply data will be returned. Otherwise, an authentication error will be returned.

NOTE • As for the transmission of the second or subsequent commands,

the authentication data can be omitted when the same connection.
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
Network Bridge Communication (continued) RS-232C Communication / Network command table

RS-232C Communication / Network command table

Communication settings
Command Data
For communication setting, use the OPTION - SERVICE - COMMUNICATION Names Operation Type Header
CRC Action Type Setting code
menu.
Turn off BE EF 03 06 00 2A D3 01 00 00 60 00 00
Set
Turn on BE EF 03 06 00 BA D2 01 00 00 60 01 00
BE EF 03 06 00 19 D3 02 00 00 60 00 00
Item Condition Power
[Example return]
Get
BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps 00 00 01 00 02 00
[Off] [On] [Cool down]
Data length 8 bit (fixed) COMPUTER IN1 BE EF 03 06 00 FE D2 01 00 00 20 00 00
COMPUTER IN2 BE EF 03 06 00 3E D0 01 00 00 20 04 00
PARITY NONE/ODD/EVEN LAN BE EF 03 06 00 CE D5 01 00 00 20 0B 00
Start bit 1 bit (fixed) HDMI BE EF 03 06 00 0E D2 01 00 00 20 03 00
Set USB TYPE A BE EF 03 06 00 5E D1 01 00 00 20 06 00
Stop bit 1 bit (fixed) Input Source
USB TYPE B BE EF 03 06 00 FE D7 01 00 00 20 0C 00
COMPONENT BE EF 03 06 00 AE D1 01 00 00 20 05 00
Transmission method HALF-DUPLEX/FULL-DUPLEX
S-VIDEO BE EF 03 06 00 9E D3 01 00 00 20 02 00
VIDEO BE EF 03 06 00 6E D3 01 00 00 20 01 00
Get BE EF 03 06 00 CD D2 02 00 00 20 00 00
NOTE • For connecting the projector to your devices, please read the
BE EF 03 06 00 D9 D8 02 00 20 60 00 00
manual for each devices, and connect them correctly with suitable cables.
[Example return]
• Turn off (the power of ) both the projector and other devices and unplug , 00 00 01 00 02 00 03 00
beore connecting them. Error Status Get
[Normal] [Cover error] [Fan error] [Lamp error]
04 00 05 00 07 00 08 00
69

[Temp error] [Air flow error] [Cold error] [Filter error]

Get BE EF 03 06 00 7C D2 02 00 07 30 00 00
MAGNIFY Increment BE EF 03 06 00 1A D2 04 00 07 30 00 00
Decrement BE EF 03 06 00 CB D3 05 00 07 30 00 00
Get BE EF 03 06 00 C8 D7 02 00 10 30 00 00
Magnify Position
Increment BE EF 03 06 00 AE D7 04 00 10 30 00 00
H
Decrement BE EF 03 06 00 7F D6 05 00 10 30 00 00
Get BE EF 03 06 00 34 D6 02 00 11 30 00 00
Magnify Position
Increment BE EF 03 06 00 52 D6 04 00 11 30 00 00
V
Decrement BE EF 03 06 00 83 D7 05 00 11 30 00 00
NORMAL BE EF 03 06 00 83 D2 01 00 02 30 00 00
Set
FREEZE FREEZE BE EF 03 06 00 13 D3 01 00 02 30 01 00
Get BE EF 03 06 00 B0 D2 02 00 02 30 00 00
NORMAL BE EF 03 06 00 23 F6 01 00 BA 30 00 00
CINEMA BE EF 03 06 00 B3 F7 01 00 BA 30 01 00
DYNAMIC BE EF 03 06 00 E3 F4 01 00 BA 30 04 00
Set BOARD(BLACK) BE EF 03 06 00 E3 EF 01 00 BA 30 20 00
BOARD(GREEN) BE EF 03 06 00 73 EE 01 00 BA 30 21 00
PICTURE WHITEBOARD BE EF 03 06 00 83 EE 01 00 BA 30 22 00
MODE DAYTIME BE EF 03 06 00 E3 C7 01 00 BA 30 40 00
BE EF 03 06 00 10 F6 02 00 BA 30 00 00
[Example return]
Get 00 00 01 00 04 00 20 00
[Normal] [Cinema] [Dynamic] [BOARD(BLACK)]
21 00 22 00 40 00 10 00
[BOARD(GREEN)] [WHITEBOARD] [DAY TIME] [Custom]

(continued on next page)

 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued)
Command Data Command Data
Names Operation Type Header Names Operation Type Header
CRC Action Type Setting code CRC Action Type Setting code
Get BE EF 03 06 00 89 D2 02 00 03 20 00 00 User Gamma Execute BE EF 03 06 00 68 C3 06 00 54 70 00 00
BRIGHTNESS Increment BE EF 03 06 00 EF D2 04 00 03 20 00 00 Point 5 Reset
Decrement BE EF 03 06 00 3E D3 05 00 03 20 00 00 Get BE EF 03 06 00 C4 FE 02 00 95 30 00 00
User Gamma Increment BE EF 03 06 00 A2 FE 04 00 95 30 00 00
BRIGHTNESS Point 6
Execute BE EF 03 06 00 58 D3 06 00 00 70 00 00
Reset Decrement BE EF 03 06 00 73 FF 05 00 95 30 00 00
Get BE EF 03 06 00 FD D3 02 00 04 20 00 00 User Gamma Execute BE EF 03 06 00 94 C2 06 00 55 70 00 00
CONTRAST Increment BE EF 03 06 00 9B D3 04 00 04 20 00 00 Point 6 Reset
Decrement BE EF 03 06 00 4A D2 05 00 04 20 00 00 Get BE EF 03 06 00 80 FE 02 00 96 30 00 00
User Gamma
CONTRAST Increment BE EF 03 06 00 E6 FE 04 00 96 30 00 00
Execute BE EF 03 06 00 A4 D2 06 00 01 70 00 00 Point 7
Reset Decrement BE EF 03 06 00 37 FF 05 00 96 30 00 00
1 DEFAULT BE EF 03 06 00 07 E9 01 00 A1 30 20 00 User Gamma
Execute BE EF 03 06 00 D0 C2 06 00 56 70 00 00
1 CUSTOM BE EF 03 06 00 07 FD 01 00 A1 30 10 00 Point 7 Reset
2 DEFAULT BE EF 03 06 00 97 E8 01 00 A1 30 21 00 Get BE EF 03 06 00 7C FF 02 00 97 30 00 00
User Gamma
2 CUSTOM BE EF 03 06 00 97 FC 01 00 A1 30 11 00 Increment BE EF 03 06 00 1A FF 04 00 97 30 00 00
Point 8
3 DEFAULT BE EF 03 06 00 67 E8 01 00 A1 30 22 00 Decrement BE EF 03 06 00 CB FE 05 00 97 30 00 00
3 CUSTOM BE EF 03 06 00 67 FC 01 00 A1 30 12 00 User Gamma
Set Execute BE EF 03 06 00 2C C3 06 00 57 70 00 00
GAMMA 4 DEFAULT BE EF 03 06 00 F7 E9 01 00 A1 30 23 00 Point 8 Reset
4 CUSTOM BE EF 03 06 00 F7 FD 01 00 A1 30 13 00 1 HIGH BE EF 03 06 00 0B F5 01 00 B0 30 03 00
5 DEFAULT BE EF 03 06 00 C7 EB 01 00 A1 30 24 00 1 CUSTOM BE EF 03 06 00 CB F8 01 00 B0 30 13 00
5 CUSTOM BE EF 03 06 00 C7 FF 01 00 A1 30 14 00 2 MID BE EF 03 06 00 9B F4 01 00 B0 30 02 00
6 DEFAULT BE EF 03 06 00 57 EA 01 00 A1 30 25 00 2 CUSTOM BE EF 03 06 00 5B F9 01 00 B0 30 12 00
6 CUSTOM BE EF 03 06 00 57 FE 01 00 A1 30 15 00 3 LOW BE EF 03 06 00 6B F4 01 00 B0 30 01 00
Get BE EF 03 06 00 F4 F0 02 00 A1 30 00 00 3 CUSTOM BE EF 03 06 00 AB F9 01 00 B0 30 11 00
70

Set
Off BE EF 03 06 00 FB FA 01 00 80 30 00 00 COLOR TEMP 4 Hi-BRIGHT-1 BE EF 03 06 00 3B F2 01 00 B0 30 08 00
9 steps gray scale BE EF 03 06 00 6B FB 01 00 80 30 01 00 4 CUSTOM BE EF 03 06 00 FB FF 01 00 B0 30 18 00
User Gamma Set
15 steps gray scale BE EF 03 06 00 9B FB 01 00 80 30 02 00 5 Hi-BRIGHT-2 BE EF 03 06 00 AB F3 01 00 B0 30 09 00
Pattern
Ramp BE EF 03 06 00 0B FA 01 00 80 30 03 00 5 CUSTOM BE EF 03 06 00 6B FE 01 00 B0 30 19 00
Get BE EF 03 06 00 C8 FA 02 00 80 30 00 00 6 Hi-BRIGHT-3 BE EF 03 06 00 5B F3 01 00 B0 30 0A 00
Get BE EF 03 06 00 08 FE 02 00 90 30 00 00 6 CUSTOM BE EF 03 06 00 9B FE 01 00 B0 30 1A 00
User Gamma Increment BE EF 03 06 00 6E FE 04 00 90 30 00 00 Get BE EF 03 06 00 C8 F5 02 00 B0 30 00 00
Point 1
Decrement BE EF 03 06 00 BF FF 05 00 90 30 00 00 Get BE EF 03 06 00 34 F4 02 00 B1 30 00 00
COLOR TEMP
User Gamma Increment BE EF 03 06 00 52 F4 04 00 B1 30 00 00
Execute BE EF 03 06 00 58 C2 06 00 50 70 00 00 GAIN R
Point 1 Reset Decrement BE EF 03 06 00 83 F5 05 00 B1 30 00 00
Get BE EF 03 06 00 F4 FF 02 00 91 30 00 00 COLOR TEMP
User Gamma Execute BE EF 03 06 00 10 C6 06 00 46 70 00 00
Increment BE EF 03 06 00 92 FF 04 00 91 30 00 00 GAIN R Reset
Point 2
Decrement BE EF 03 06 00 43 FE 05 00 91 30 00 00 Get BE EF 03 06 00 70 F4 02 00 B2 30 00 00
COLOR TEMP
User Gamma Increment BE EF 03 06 00 16 F4 04 00 B2 30 00 00
Point 2 Reset
Execute BE EF 03 06 00 A4 C3 06 00 51 70 00 00 GAIN G
Decrement BE EF 03 06 00 C7 F5 05 00 B2 30 00 00
Get BE EF 03 06 00 B0 FF 02 00 92 30 00 00 COLOR TEMP
User Gamma Increment BE EF 03 06 00 D6 FF 04 00 92 30 00 00
Execute BE EF 03 06 00 EC C7 06 00 47 70 00 00
Point 3 GAIN G Reset
Decrement BE EF 03 06 00 07 FE 05 00 92 30 00 00 Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00
User Gamma COLOR TEMP
Execute BE EF 03 06 00 E0 C3 06 00 52 70 00 00 Increment BE EF 03 06 00 EA F5 04 00 B3 30 00 00
Point 3 Reset GAIN B
Decrement BE EF 03 06 00 3B F4 05 00 B3 30 00 00
Get BE EF 03 06 00 4C FE 02 00 93 30 00 00 COLOR TEMP
User Gamma Increment BE EF 03 06 00 2A FE 04 00 93 30 00 00 Execute BE EF 03 06 00 F8 C4 06 00 48 70 00 00
Point 4 GAIN B Reset
Decrement BE EF 03 06 00 FB FF 05 00 93 30 00 00 Get BE EF 03 06 00 04 F5 02 00 B5 30 00 00
User Gamma COLOR TEMP
Execute BE EF 03 06 00 1C C2 06 00 53 70 00 00 Increment BE EF 03 06 00 62 F5 04 00 B5 30 00 00
Point 4 Reset OFFSET R
Decrement BE EF 03 06 00 B3 F4 05 00 B5 30 00 00
Get BE EF 03 06 00 38 FF 02 00 94 30 00 00
User Gamma Increment BE EF 03 06 00 5E FF 04 00 94 30 00 00
Point 5
Decrement BE EF 03 06 00 8F FE 05 00 94 30 00 00
(continued on next page) (continued on next page)
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued)
Command Data Command Data
Names Operation Type Header Names Operation Type Header
CRC Action Type Setting code CRC Action Type Setting code
COLOR TEMP Get BE EF 03 06 00 91 70 02 00 09 22 00 00
OFFSET R Execute BE EF 03 06 00 40 C5 06 00 4A 70 00 00 OVER SCAN Increment BE EF 03 06 00 F7 70 04 00 09 22 00 00
Reset Decrement BE EF 03 06 00 26 71 05 00 09 22 00 00
Get BE EF 03 06 00 40 F5 02 00 B6 30 00 00 OVER SCAN
COLOR TEMP Execute BE EF 03 06 00 EC D9 06 00 27 70 00 00
Increment BE EF 03 06 00 26 F5 04 00 B6 30 00 00 Reset
OFFSET G
Decrement BE EF 03 06 00 F7 F4 05 00 B6 30 00 00 Get BE EF 03 06 00 0D 83 02 00 00 21 00 00
COLOR TEMP V POSITION Increment BE EF 03 06 00 6B 83 04 00 00 21 00 00
OFFSET G Execute BE EF 03 06 00 BC C4 06 00 4B 70 00 00 Decrement BE EF 03 06 00 BA 82 05 00 00 21 00 00
Reset V POSITION
Get BE EF 03 06 00 BC F4 02 00 B7 30 00 00 Execute BE EF 03 06 00 E0 D2 06 00 02 70 00 00
Reset
COLOR TEMP
Increment BE EF 03 06 00 DA F4 04 00 B7 30 00 00 Get BE EF 03 06 00 F1 82 02 00 01 21 00 00
OFFSET B
Decrement BE EF 03 06 00 0B F5 05 00 B7 30 00 00 H POSITION Increment BE EF 03 06 00 97 82 04 00 01 21 00 00
COLOR TEMP Decrement BE EF 03 06 00 46 83 05 00 01 21 00 00
OFFSET B Execute BE EF 03 06 00 C8 C5 06 00 4C 70 00 00 H POSITION
Reset Execute BE EF 03 06 00 1C D3 06 00 03 70 00 00
Reset
Get BE EF 03 06 00 B5 72 02 00 02 22 00 00 Get BE EF 03 06 00 49 83 02 00 03 21 00 00
COLOR Increment BE EF 03 06 00 D3 72 04 00 02 22 00 00 H PHASE Increment BE EF 03 06 00 2F 83 04 00 03 21 00 00
Decrement BE EF 03 06 00 02 73 05 00 02 22 00 00 Decrement BE EF 03 06 00 FE 82 05 00 03 21 00 00
COLOR Reset Execute BE EF 03 06 00 80 D0 06 00 0A 70 00 00 Get BE EF 03 06 00 B5 82 02 00 02 21 00 00
Get BE EF 03 06 00 49 73 02 00 03 22 00 00 H SIZE Increment BE EF 03 06 00 D3 82 04 00 02 21 00 00
TINT Increment BE EF 03 06 00 2F 73 04 00 03 22 00 00 Decrement BE EF 03 06 00 02 83 05 00 02 21 00 00
Decrement BE EF 03 06 00 FE 72 05 00 03 22 00 00 H SIZE Reset Execute BE EF 03 06 00 68 D2 06 00 04 70 00 00
TINT Reset Execute BE EF 03 06 00 7C D1 06 00 0B 70 00 00
71

AUTO ADJUST
Get BE EF 03 06 00 F1 72 02 00 01 22 00 00 Execute BE EF 03 06 00 91 D0 06 00 0A 20 00 00
EXECUTE
SHARPNESS Increment BE EF 03 06 00 97 72 04 00 01 22 00 00 OFF BE EF 03 06 00 4A 72 01 00 07 22 00 00
Decrement BE EF 03 06 00 46 73 05 00 01 22 00 00 Set TV BE EF 03 06 00 DA 73 01 00 07 22 01 00
SHARPNESS PROGRESSIVE
Execute BE EF 03 06 00 C4 D0 06 00 09 70 00 00 FILM BE EF 03 06 00 2A 73 01 00 07 22 02 00
Reset Get BE EF 03 06 00 79 72 02 00 07 22 00 00
OFF BE EF 03 06 00 0B 22 01 00 04 33 00 00 LOW BE EF 03 06 00 26 72 01 00 06 22 01 00
Set THEATER BE EF 03 06 00 CB 2F 01 00 04 33 10 00 Set MID BE EF 03 06 00 D6 72 01 00 06 22 02 00
ACTIVE IRIS VIDEO NR
PRESENTATION BE EF 03 06 00 5B 2E 01 00 04 33 11 00 HIGH BE EF 03 06 00 46 73 01 00 06 22 03 00
Get BE EF 03 06 00 38 22 02 00 04 33 00 00 Get BE EF 03 06 00 85 73 02 00 06 22 00 00
1 BE EF 03 06 00 0E D7 01 00 14 20 00 00 AUTO BE EF 03 06 00 0E 72 01 00 04 22 00 00
MY MEMORY 2 BE EF 03 06 00 9E D6 01 00 14 20 01 00 RGB BE EF 03 06 00 9E 73 01 00 04 22 01 00
Set
Load 3 BE EF 03 06 00 6E D6 01 00 14 20 02 00 Set SMPTE240 BE EF 03 06 00 6E 73 01 00 04 22 02 00
4 BE EF 03 06 00 FE D7 01 00 14 20 03 00 COLOR SPACE
REC709 BE EF 03 06 00 FE 72 01 00 04 22 03 00
1 BE EF 03 06 00 F2 D6 01 00 15 20 00 00 REC601 BE EF 03 06 00 CE 70 01 00 04 22 04 00
MY MEMORY 2 BE EF 03 06 00 62 D7 01 00 15 20 01 00 Get BE EF 03 06 00 3D 72 02 00 04 22 00 00
Set
Save 3 BE EF 03 06 00 92 D7 01 00 15 20 02 00 COMPONENT BE EF 03 06 00 4A D7 01 00 17 20 00 00
4 BE EF 03 06 00 02 D6 01 00 15 20 03 00 Set
COMPONENT SCART RGB BE EF 03 06 00 DA D6 01 00 17 20 01 00
4:3 BE EF 03 06 00 9E D0 01 00 08 20 00 00 Get BE EF 03 06 00 79 D7 02 00 17 20 00 00
16:9 BE EF 03 06 00 0E D1 01 00 08 20 01 00 AUTO BE EF 03 06 00 E6 70 01 00 12 22 0A 00
14:9 BE EF 03 06 00 CE D6 01 00 08 20 09 00 NTSC BE EF 03 06 00 86 74 01 00 12 22 04 00
Set
ASPECT 16:10 BE EF 03 06 00 3E D6 01 00 08 20 0A 00 PAL BE EF 03 06 00 16 75 01 00 12 22 05 00
(*) NATIVE BE EF 03 06 00 5E D7 01 00 08 20 08 00 S-VIDEO Set SECAM BE EF 03 06 00 16 70 01 00 12 22 09 00
NORMAL BE EF 03 06 00 5E DD 01 00 08 20 10 00 FORMAT NTSC4.43 BE EF 03 06 00 26 77 01 00 12 22 02 00
Get BE EF 03 06 00 AD D0 02 00 08 20 00 00 M-PAL BE EF 03 06 00 86 71 01 00 12 22 08 00
(*) only for CP-WX3014WN N-PAL BE EF 03 06 00 76 74 01 00 12 22 07 00
Get BE EF 03 06 00 75 76 02 00 12 22 00 00

(continued on next page) (continued on next page)

 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued)
Command Data Command Data
Names Operation Type Header Names Operation Type Header
CRC Action Type Setting code CRC Action Type Setting code
AUTO BE EF 03 06 00 A2 70 01 00 11 22 0A 00 NORMAL BE EF 03 06 00 D6 D2 01 00 01 60 00 00
STANDBY Set
NTSC BE EF 03 06 00 C2 74 01 00 11 22 04 00 SAVING BE EF 03 06 00 46 D3 01 00 01 60 01 00
MODE
PAL BE EF 03 06 00 52 75 01 00 11 22 05 00 Get BE EF 03 06 00 E5 D2 02 00 01 60 00 00
C-VIDEO Set SECAM BE EF 03 06 00 52 70 01 00 11 22 09 00 COMPUTER IN1 BE EF 03 06 00 3E F4 01 00 B0 20 00 00
MONITOR OUT - Set
FORMAT NTSC4.43 BE EF 03 06 00 62 77 01 00 11 22 02 00 OFF BE EF 03 06 00 CE B5 01 00 B0 20 FF 00
COMPUTER IN1
M-PAL BE EF 03 06 00 C2 71 01 00 11 22 08 00 Get BE EF 03 06 00 0D F4 02 00 B0 20 00 00
N-PAL BE EF 03 06 00 32 74 01 00 11 22 07 00 COMPUTER IN2 BE EF 03 06 00 CE F7 01 00 B4 20 04 00
MONITOR OUT - Set
Get BE EF 03 06 00 31 76 02 00 11 22 00 00 OFF BE EF 03 06 00 FE B4 01 00 B4 20 FF 00
COMPUTER IN2
AUTO BE EF 03 06 00 BA 77 01 00 13 22 00 00 Get BE EF 03 06 00 3D F5 02 00 B4 20 00 00
Set VIDEO BE EF 03 06 00 2A 76 01 00 13 22 01 00 COMPUTER IN1 BE EF 03 06 00 F2 F4 01 00 B5 20 00 00
HDMI FORMAT
COMPUTER BE EF 03 06 00 DA 76 01 00 13 22 02 00 MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 32 F6 01 00 B5 20 04 00
Get BE EF 03 06 00 89 77 02 00 13 22 00 00 - COMPONENT OFF BE EF 03 06 00 02 B5 01 00 B5 20 FF 00
AUTO BE EF 03 06 00 86 D8 01 00 22 20 00 00 Get BE EF 03 06 00 C1 F4 02 00 B5 20 00 00
Set NORMAL BE EF 03 06 00 16 D9 01 00 22 20 01 00 COMPUTER IN1 BE EF 03 06 00 86 F5 01 00 B2 20 00 00
HDMI RANGE
ENHANCED BE EF 03 06 00 E6 D9 01 00 22 20 02 00 MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 46 F7 01 00 B2 20 04 00
Get BE EF 03 06 00 B5 D8 02 00 22 20 00 00 - S-VIDEO OFF BE EF 03 06 00 76 B4 01 00 B2 20 FF 00
AUTO BE EF 03 06 00 CE D6 01 00 10 20 03 00 Get BE EF 03 06 00 B5 F5 02 00 B2 20 00 00
Set
COMPUTER IN1 SYNC ON G OFF BE EF 03 06 00 5E D7 01 00 10 20 02 00 COMPUTER IN1 BE EF 03 06 00 C2 F5 01 00 B1 20 00 00
Get BE EF 03 06 00 0D D6 02 00 10 20 00 00 MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 02 F7 01 00 B1 20 04 00
AUTO BE EF 03 06 00 32 D7 01 00 11 20 03 00 - VIDEO OFF BE EF 03 06 00 32 B4 01 00 B1 20 FF 00
Set
COMPUTER IN2 SYNC ON G OFF BE EF 03 06 00 A2 D6 01 00 11 20 02 00 Get BE EF 03 06 00 F1 F5 02 00 B1 20 00 00
Get BE EF 03 06 00 F1 D7 02 00 11 20 00 00 COMPUTER IN1 BE EF 03 06 00 7A F4 01 00 B3 20 00 00
OFF BE EF 03 06 00 3B C2 01 00 50 30 00 00 MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 BA F6 01 00 B3 20 04 00
72

FRAME LOCK – Set

ON BE EF 03 06 00 AB C3 01 00 50 30 01 00 - HDMI OFF BE EF 03 06 00 8A B5 01 00 B3 20 FF 00
COMPUTER IN1
Get BE EF 03 06 00 08 C2 02 00 50 30 00 00 Get BE EF 03 06 00 49 F4 02 00 B3 20 00 00
OFF BE EF 03 06 00 0B C3 01 00 54 30 00 00 COMPUTER IN1 BE EF 03 06 00 1A F6 01 00 BB 20 00 00
FRAME LOCK – Set
ON BE EF 03 06 00 9B C2 01 00 54 30 01 00 MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 DA F4 01 00 BB 20 04 00
COMPUTER IN2
Get BE EF 03 06 00 38 C3 02 00 54 30 00 00 - LAN OFF BE EF 03 06 00 EA B7 01 00 BB 20 FF 00
OFF BE EF 03 06 00 7F C2 01 00 53 30 00 00 Get BE EF 03 06 00 29 F6 02 00 BB 20 00 00
FRAME LOCK - Set
ON BE EF 03 06 00 EF C3 01 00 53 30 01 00 COMPUTER IN1 BE EF 03 06 00 B6 F4 01 00 B6 20 00 00
HDMI
Get BE EF 03 06 00 4C C2 02 00 53 30 00 00 MONITOR OUT- Set COMPUTER IN2 BE EF 03 06 00 76 F6 01 00 B6 20 04 00
AUTO USB TYPE A OFF BE EF 03 06 00 46 B5 01 00 B6 20 FF 00
KEYSTONE V Execute BE EF 03 06 00 E5 D1 06 00 0D 20 00 00 Get BE EF 03 06 00 85 F4 02 00 B6 20 00 00
EXECUTE COMPUTER IN1 BE EF 03 06 00 6E F7 01 00 BC 20 00 00
Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00 MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 AE F5 01 00 BC 20 04 00
KEYSTONE V Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00 - USB TYPE B OFF BE EF 03 06 00 9E B6 01 00 BC 20 FF 00
Decrement BE EF 03 06 00 0E D2 05 00 07 20 00 00 Get BE EF 03 06 00 5D F7 02 00 BC 20 00 00
KEYSTONE V COMPUTER IN1 BE EF 03 06 00 2A F7 01 00 BF 20 00 00
Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00
Reset MONITOR OUT Set COMPUTER IN2 BE EF 03 06 00 EA F5 01 00 BF 20 04 00
OFF BE EF 03 06 00 FB 27 01 00 10 33 00 00 - STANDBY OFF BE EF 03 06 00 DA B6 01 00 BF 20 FF 00
AUTO ECO Set
ON BE EF 03 06 00 6B 26 01 00 10 33 01 00 Get BE EF 03 06 00 19 F7 02 00 BF 20 00 00
MODE
Get BE EF 03 06 00 C8 27 02 00 10 33 00 00 Get BE EF 03 06 00 CD CC 02 00 60 20 00 00
NORMAL BE EF 03 06 00 3B 23 01 00 00 33 00 00
VOLUME -
Increment BE EF 03 06 00 AB CC 04 00 60 20 00 00
Set COMPUTER IN1
ECO MODE ECO BE EF 03 06 00 AB 22 01 00 00 33 01 00 Decrement BE EF 03 06 00 7A CD 05 00 60 20 00 00
Get BE EF 03 06 00 08 23 02 00 00 33 00 00 Get BE EF 03 06 00 FD CD 02 00 64 20 00 00
NORMAL BE EF 03 06 00 C7 D2 01 00 01 30 00 00
VOLUME -
Increment BE EF 03 06 00 9B CD 04 00 64 20 00 00
COMPUTER IN2
H:INVERT BE EF 03 06 00 57 D3 01 00 01 30 01 00 Decrement BE EF 03 06 00 4A CC 05 00 64 20 00 00
Set
MIRROR V:INVERT BE EF 03 06 00 A7 D3 01 00 01 30 02 00 Get BE EF 03 06 00 01 CC 02 00 65 20 00 00
H&V:INVERT BE EF 03 06 00 37 D2 01 00 01 30 03 00
VOLUME -
Increment BE EF 03 06 00 67 CC 04 00 65 20 00 00
COMPONENT
Get BE EF 03 06 00 F4 D2 02 00 01 30 00 00 Decrement BE EF 03 06 00 B6 CD 05 00 65 20 00 00

(continued on next page) (continued on next page)

 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued)
Command Data Command Data
Names Operation Type Header Names Operation Type Header
CRC Action Type Setting code CRC Action Type Setting code
Get BE EF 03 06 00 75 CD 02 00 62 20 00 00 AUDIO IN1 BE EF 03 06 00 E6 DC 01 00 36 20 01 00
VOLUME -
Increment BE EF 03 06 00 13 CD 04 00 62 20 00 00 AUDIO IN2 BE EF 03 06 00 16 DC 01 00 36 20 02 00
S-VIDEO AUDIO
Decrement BE EF 03 06 00 C2 CC 05 00 62 20 00 00 Set AUDIO IN3 BE EF 03 06 00 86 DD 01 00 36 20 03 00
SOURCE -
Get BE EF 03 06 00 31 CD 02 00 61 20 00 00 AUDIO_USB TYPE A BE EF 03 06 00 B6 D0 01 00 36 20 10 00
VOLUME - USB TYPE A
Increment BE EF 03 06 00 57 CD 04 00 61 20 00 00 OFF BE EF 03 06 00 DA DF 01 00 3B 20 00 00
VIDEO
Decrement BE EF 03 06 00 86 CC 05 00 61 20 00 00 Get BE EF 03 06 00 45 DD 02 00 36 20 00 00
Get BE EF 03 06 00 89 CC 02 00 63 20 00 00 AUDIO IN1 BE EF 03 06 00 3E DF 01 00 3C 20 01 00
VOLUME - HDMI Increment BE EF 03 06 00 EF CC 04 00 63 20 00 00 AUDIO IN2 BE EF 03 06 00 CE DF 01 00 3C 20 02 00
Decrement BE EF 03 06 00 3E CD 05 00 63 20 00 00
AUDIO Set AUDIO IN3 BE EF 03 06 00 5E DE 01 00 3C 20 03 00
SOURCE -
Get BE EF 03 06 00 E9 CE 02 00 6B 20 00 00 AUDIO_USB TYPE B BE EF 03 06 00 0E D2 01 00 3C 20 12 00
USB TYPE B
VOLUME - LAN Increment BE EF 03 06 00 8F CE 04 00 6B 20 00 00 OFF BE EF 03 06 00 AE DE 01 00 3C 20 00 00
Decrement BE EF 03 06 00 5E CF 05 00 6B 20 00 00 Get BE EF 03 06 00 9D DE 02 00 3C 20 00 00
Get BE EF 03 06 00 45 CC 02 00 66 20 00 00 AUDIO IN1 BE EF 03 06 00 2A DC 01 00 33 20 01 00
VOLUME - USB
Increment BE EF 03 06 00 23 CC 04 00 66 20 00 00 AUDIO IN2 BE EF 03 06 00 DA DC 01 00 33 20 02 00
TYPE A AUDIO
Decrement BE EF 03 06 00 F2 CD 05 00 66 20 00 00 Set AUDIO IN3 BE EF 03 06 00 4A DD 01 00 33 20 03 00
SOURCE -
Get BE EF 03 06 00 9D CF 02 00 6C 20 00 00 AUDIO_HDMI BE EF 03 06 00 7A C4 01 00 33 20 20 00
VOLUME - USB HDMI
Increment BE EF 03 06 00 FB CF 04 00 6C 20 00 00 OFF BE EF 03 06 00 BA DD 01 00 33 20 00 00
TYPE B
Decrement BE EF 03 06 00 2A CE 05 00 6C 20 00 00 Get BE EF 03 06 00 89 DD 02 00 33 20 00 00
Get BE EF 03 06 00 D9 CF 02 00 6F 20 00 00 AUDIO IN1 BE EF 03 06 00 A2 DC 01 00 35 20 01 00
VOLUME -
Increment BE EF 03 06 00 BF CF 04 00 6F 20 00 00 AUDIO AUDIO IN2 BE EF 03 06 00 52 DC 01 00 35 20 02 00
STANDBY Set
Decrement BE EF 03 06 00 6E CE 05 00 6F 20 00 00 SOURCE - AUDIO IN3 BE EF 03 06 00 C2 DD 01 00 35 20 03 00
Get BE EF 03 06 00 CD C3 02 00 50 20 00 00 COMPONENT OFF BE EF 03 06 00 32 DD 01 00 35 20 00 00
VOLUME - ALL Increment BE EF 03 06 00 AB C3 04 00 50 20 00 00 Get BE EF 03 06 00 01 DD 02 00 35 20 00 00
73

Decrement BE EF 03 06 00 7A C2 05 00 50 20 00 00 AUDIO IN1 BE EF 03 06 00 D6 DD 01 00 32 20 01 00

OFF BE EF 03 06 00 46 D3 01 00 02 20 00 00 AUDIO AUDIO IN2 BE EF 03 06 00 26 DD 01 00 32 20 02 00
Set Set
MUTE ON BE EF 03 06 00 D6 D2 01 00 02 20 01 00 SOURCE - AUDIO IN3 BE EF 03 06 00 B6 DC 01 00 32 20 03 00
Get BE EF 03 06 00 75 D3 02 00 02 20 00 00 S-VIDEO OFF BE EF 03 06 00 46 DC 01 00 32 20 00 00
ON BE EF 03 06 00 FE D4 01 00 1C 20 01 00 Get BE EF 03 06 00 75 DC 02 00 32 20 00 00
Set
SPEAKER OFF BE EF 03 06 00 6E D5 01 00 1C 20 00 00 AUDIO IN1 BE EF 03 06 00 92 DD 01 00 31 20 01 00
Get BE EF 03 06 00 5D D5 02 00 1C 20 00 00 AUDIO AUDIO IN2 BE EF 03 06 00 62 DD 01 00 31 20 02 00
Set
AUDIO IN1 BE EF 03 06 00 6E DC 01 00 30 20 01 00 SOURCE - AUDIO IN3 BE EF 03 06 00 F2 DC 01 00 31 20 03 00
AUDIO AUDIO IN2 BE EF 03 06 00 9E DC 01 00 30 20 02 00 VIDEO OFF BE EF 03 06 00 02 DC 01 00 31 20 00 00
Set
SOURCE - AUDIO IN3 BE EF 03 06 00 0E DD 01 00 30 20 03 00 Get BE EF 03 06 00 31 DC 02 00 31 20 00 00
COMPUTER IN1 OFF BE EF 03 06 00 FE DD 01 00 30 20 00 00 AUDIO IN1 BE EF 03 06 00 7A DF 01 00 3F 20 01 00
Get BE EF 03 06 00 CD DD 02 00 30 20 00 00 AUDIO AUDIO IN2 BE EF 03 06 00 8A DF 01 00 3F 20 02 00
Set
AUDIO IN1 BE EF 03 06 00 5E DD 01 00 34 20 01 00 SOURCE - AUDIO IN3 BE EF 03 06 00 1A DE 01 00 3F 20 03 00
AUDIO AUDIO IN2 BE EF 03 06 00 AE DD 01 00 34 20 02 00 STANDBY OFF BE EF 03 06 00 EA DE 01 00 3F 20 00 00
Set
SOURCE - AUDIO IN3 BE EF 03 06 00 3E DC 01 00 34 20 03 00 Get BE EF 03 06 00 D9 DE 02 00 3F 20 00 00
COMPUTER IN2 OFF BE EF 03 06 00 CE DC 01 00 34 20 00 00 LAN Disable BE EF 03 06 00 BA F0 01 00 A3 20 00 00
Set
Get BE EF 03 06 00 FD DC 02 00 34 20 00 00 SOUND Enable BE EF 03 06 00 2A F1 01 00 A3 20 01 00
AUDIO IN1 BE EF 03 06 00 4A DE 01 00 3B 20 01 00 ENABLE Get BE EF 03 06 00 89 F0 02 00 A3 20 00 00
AUDIO IN2 BE EF 03 06 00 BA DE 01 00 3B 20 02 00 USB TYPE A Disable BE EF 03 06 00 CE F1 01 00 A4 20 00 00
AUDIO Set
Set AUDIO IN3 BE EF 03 06 00 2A DF 01 00 3B 20 03 00 SOUND Enable BE EF 03 06 00 5E F0 01 00 A4 20 01 00
SOURCE -
AUDIO_LAN BE EF 03 06 00 8A D3 01 00 3B 20 11 00 ENABLE Get BE EF 03 06 00 FD F1 02 00 A4 20 00 00
LAN
OFF BE EF 03 06 00 DA DF 01 00 3B 20 00 00 USB TYPE B Disable BE EF 03 06 00 32 F0 01 00 A5 20 00 00
Set
Get BE EF 03 06 00 E9 DF 02 00 3B 20 00 00 SOUND Enable BE EF 03 06 00 A2 F1 01 00 A5 20 01 00
ENABLE Get BE EF 03 06 00 01 F0 02 00 A5 20 00 00
1 BE EF 03 06 00 AE C6 01 00 40 20 01 00
Set
HDMI AUDIO 2 BE EF 03 06 00 5E C6 01 00 40 20 02 00
Get BE EF 03 06 00 0D C7 02 00 40 20 00 00

(continued on next page) (continued on next page)

 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication / Network command table (continued) RS-232C Communication / Network command table (continued)
Command Data Command Data
Names Operation Type Header Names Operation Type Header
CRC Action Type Setting code CRC Action Type Setting code
LOW BE EF 03 06 00 02 F1 01 00 A1 20 00 00 MENU
Set
MIC LEVEL HIGH BE EF 03 06 00 92 F0 01 00 A1 20 01 00 POSITION V Execute BE EF 03 06 00 A8 C7 06 00 44 70 00 00
Get BE EF 03 06 00 31 F1 02 00 A1 20 00 00 Reset
Get BE EF 03 06 00 75 F1 02 00 A2 20 00 00 MyScreen BE EF 03 06 00 FB CA 01 00 00 30 20 00
MIC VOLUME Increment BE EF 03 06 00 13 F1 04 00 A2 20 00 00 ORIGINAL BE EF 03 06 00 FB E2 01 00 00 30 40 00
Decrement BE EF 03 06 00 C2 F0 05 00 A2 20 00 00 Set BLUE BE EF 03 06 00 CB D3 01 00 00 30 03 00
BLANK
ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00 WHITE BE EF 03 06 00 6B D0 01 00 00 30 05 00
FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00 BLACK BE EF 03 06 00 9B D0 01 00 00 30 06 00
DEUTSCH BE EF 03 06 00 97 D2 01 00 05 30 02 00 Get BE EF 03 06 00 08 D3 02 00 00 30 00 00
ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00 OFF BE EF 03 06 00 FB D8 01 00 20 30 00 00
Set
ITALIANO BE EF 03 06 00 37 D1 01 00 05 30 04 00 BLANK On/Off ON BE EF 03 06 00 6B D9 01 00 20 30 01 00
NORSK BE EF 03 06 00 A7 D0 01 00 05 30 05 00 Get BE EF 03 06 00 C8 D8 02 00 20 30 00 00
NEDERLANDS BE EF 03 06 00 57 D0 01 00 05 30 06 00 MyScreen BE EF 03 06 00 CB CB 01 00 04 30 20 00
PORTUGUÊS BE EF 03 06 00 C7 D1 01 00 05 30 07 00 Set ORIGINAL BE EF 03 06 00 0B D2 01 00 04 30 00 00
START UP
BE EF 03 06 00 37 D4 01 00 05 30 08 00 OFF BE EF 03 06 00 9B D3 01 00 04 30 01 00
BE EF 03 06 00 A7 D5 01 00 05 30 09 00 Get BE EF 03 06 00 38 D2 02 00 04 30 00 00
BE EF 03 06 00 37 DE 01 00 05 30 10 00 OFF BE EF 03 06 00 3B EF 01 00 C0 30 00 00
Set
BE EF 03 06 00 57 D5 01 00 05 30 0A 00 MyScreen Lock ON BE EF 03 06 00 AB EE 01 00 C0 30 01 00
SVENSKA BE EF 03 06 00 C7 D4 01 00 05 30 0B 00 Get BE EF 03 06 00 08 EF 02 00 C0 30 00 00
PУCCKИЙ BE EF 03 06 00 F7 D6 01 00 05 30 0C 00 OFF BE EF 03 06 00 8F D6 01 00 17 30 00 00
Set
SUOMI BE EF 03 06 00 67 D7 01 00 05 30 0D 00 MESSAGE ON BE EF 03 06 00 1F D7 01 00 17 30 01 00
Set POLSKI BE EF 03 06 00 97 D7 01 00 05 30 0E 00 Get BE EF 03 06 00 BC D6 02 00 17 30 00 00
LANGUAGE TÜRKÇE BE EF 03 06 00 07 D6 01 00 05 30 0F 00 TEST PATTERN BE EF 03 06 00 43 D9 01 00 22 30 00 00
74

DANSK BE EF 03 06 00 A7 DF 01 00 05 30 11 00 DOT-LINE1 BE EF 03 06 00 D3 D8 01 00 22 30 01 00
ČESKY BE EF 03 06 00 57 DF 01 00 05 30 12 00 DOT-LINE2 BE EF 03 06 00 23 D8 01 00 22 30 02 00
MAGYAR BE EF 03 06 00 C7 DE 01 00 05 30 13 00 DOT-LINE3 BE EF 03 06 00 B3 D9 01 00 22 30 03 00
ROMÂNĂ BE EF 03 06 00 F7 DC 01 00 05 30 14 00 Set DOT-LINE4 BE EF 03 06 00 83 DB 01 00 22 30 04 00
TEMPLATE
SLOVENSKI BE EF 03 06 00 67 DD 01 00 05 30 15 00 CIRCLE 1 BE EF 03 06 00 13 DA 01 00 22 30 05 00
HRVATSKI BE EF 03 06 00 97 DD 01 00 05 30 16 00 CIRCLE 2 BE EF 03 06 00 E3 DA 01 00 22 30 06 00
ΕΛΛΗΝΙΚΑ BE EF 03 06 00 07 DC 01 00 05 30 17 00 MAP 1 BE EF 03 06 00 83 D4 01 00 22 30 10 00
LIETUVIŲ BE EF 03 06 00 F7 D9 01 00 05 30 18 00 MAP 2 BE EF 03 06 00 13 D5 01 00 22 30 11 00
EESTI BE EF 03 06 00 67 D8 01 00 05 30 19 00 Get BE EF 03 06 00 70 D9 02 00 22 30 00 00
LATVIEŠU BE EF 03 06 00 97 D8 01 00 05 30 1A 00 OFF BE EF 03 06 00 BF D8 01 00 23 30 00 00
TEMPLATE On/ Set
ไทย BE EF 03 06 00 07 D9 01 00 05 30 1B 00 ON BE EF 03 06 00 2F D9 01 00 23 30 01 00
Off
‫ﺓیﺏﺭﻉﻝﺍ ﺓﻍﻝﻝﺍ‬ BE EF 03 06 00 37 DB 01 00 05 30 1C 00 Get BE EF 03 06 00 8C D8 02 00 23 30 00 00
‫ﻯﺱﺭﺍﻑ‬‎ BE EF 03 06 00 A7 DA 01 00 05 30 1D 00 OFF BE EF 03 06 00 FA 62 01 00 00 37 00 00
PORTUGUÊS BRA BE EF 03 06 00 57 DA 01 00 05 30 1E 00 Set ON BE EF 03 06 00 6A 63 01 00 00 37 01 00
C. C. - DISPLAY
Get BE EF 03 06 00 C4 D3 02 00 05 30 00 00 AUTO BE EF 03 06 00 9A 63 01 00 00 37 02 00
NOTE) Not all of the languages in this table are supported. Get BE EF 03 06 00 C9 62 02 00 00 37 00 00
Get BE EF 03 06 00 04 D7 02 00 15 30 00 00 CAPTIONS BE EF 03 06 00 06 63 01 00 01 37 00 00
MENU Set
Increment BE EF 03 06 00 62 D7 04 00 15 30 00 00 C. C. - MODE TEXT BE EF 03 06 00 96 62 01 00 01 37 01 00
POSITION H
Decrement BE EF 03 06 00 B3 D6 05 00 15 30 00 00 Get BE EF 03 06 00 35 63 02 00 01 37 00 00
MENU 1 BE EF 03 06 00 D2 62 01 00 02 37 01 00
POSITION H Execute BE EF 03 06 00 DC C6 06 00 43 70 00 00 2 BE EF 03 06 00 22 62 01 00 02 37 02 00
C. C. - Set
Reset 3 BE EF 03 06 00 B2 63 01 00 02 37 03 00
CHANNEL
Get BE EF 03 06 00 40 D7 02 00 16 30 00 00 4 BE EF 03 06 00 82 61 01 00 02 37 04 00
MENU
Increment BE EF 03 06 00 26 D7 04 00 16 30 00 00 Get BE EF 03 06 00 71 63 02 00 02 37 00 00
POSITION V
Decrement BE EF 03 06 00 F7 D6 05 00 16 30 00 00 OFF BE EF 03 06 00 B6 D6 01 00 16 20 00 00
Set
AUTO SEARCH ON BE EF 03 06 00 26 D7 01 00 16 20 01 00
Get BE EF 03 06 00 85 D6 02 00 16 20 00 00

(continued on next page) (continued on next page)

 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C
RS-232CCommunication
Communication/ /Network
Networkcommand
commandtable
table(continued)
(continued) RS-232C
RS-232CCommunication
Communication/ /Network
Networkcommand
commandtable
table(continued)
(continued)
Command Data Command Data
Names Operation Type Header Names Operation Type Header
CRC Action Type Setting code CRC Action Type Setting code
OFF BE EF 03 06 00 EA D1 01 00 0F 20 00 00 COMPUTER IN1 BE EF 03 06 00 C6 32 01 00 01 36 00 00
AUTO Set
ON BE EF 03 06 00 7A D0 01 00 0F 20 01 00 COMPUTER IN2 BE EF 03 06 00 06 30 01 00 01 36 04 00
KEYSTONE
Get BE EF 03 06 00 D9 D1 02 00 0F 20 00 00 LAN BE EF 03 06 00 F6 35 01 00 01 36 0B 00
OFF BE EF 03 06 00 3B 89 01 00 20 31 00 00 USB TYPE A BE EF 03 06 00 66 31 01 00 01 36 06 00
DIRECT Set
ON BE EF 03 06 00 AB 88 01 00 20 31 01 00 USB TYPE B BE EF 03 06 00 C6 37 01 00 01 36 0C 00
POWER ON
Get BE EF 03 06 00 08 89 02 00 20 31 00 00 HDMI BE EF 03 06 00 36 32 01 00 01 36 03 00
Get BE EF 03 06 00 08 86 02 00 10 31 00 00 COMPONENT BE EF 03 06 00 96 31 01 00 01 36 05 00
AUTO POWER
Increment BE EF 03 06 00 6E 86 04 00 10 31 00 00 S-VIDEO BE EF 03 06 00 A6 33 01 00 01 36 02 00
OFF
Decrement BE EF 03 06 00 BF 87 05 00 10 31 00 00 VIDEO BE EF 03 06 00 56 33 01 00 01 36 01 00
MOUSE BE EF 03 06 00 FF 23 01 00 50 26 00 00 SLIDESHOW BE EF 03 06 00 66 2A 01 00 01 36 22 00
Set
USB TYPE B USB DISPLAY BE EF 03 06 00 6F 22 01 00 50 26 01 00 MY IMAGE, BE EF 03 06 00 A6 3C 01 00 01 36 16 00
Get BE EF 03 06 00 CC 23 02 00 50 26 00 00 Set MESSENGER BE EF 03 06 00 56 28 01 00 01 36 25 00
MY BUTTON-2
LAMP TIME Get BE EF 03 06 00 C2 FF 02 00 90 10 00 00 INFORMATION BE EF 03 06 00 06 3F 01 00 01 36 10 00
LAMP TIME AUTO KEYSTONE V BE EF 03 06 00 96 3E 01 00 01 36 11 00
Execute BE EF 03 06 00 58 DC 06 00 30 70 00 00
Reset MY MEMORY BE EF 03 06 00 66 3E 01 00 01 36 12 00
FILTER TIME Get BE EF 03 06 00 C2 F0 02 00 A0 10 00 00 ACTIVE IRIS BE EF 03 06 00 56 3C 01 00 01 36 15 00
FILTER TIME PICTURE MODE BE EF 03 06 00 F6 3F 01 00 01 36 13 00
Execute BE EF 03 06 00 98 C6 06 00 40 70 00 00 FILTER RESET BE EF 03 06 00 C6 3D 01 00 01 36 14 00
Reset
COMPUTER IN1 BE EF 03 06 00 3A 33 01 00 00 36 00 00 AV MUTE BE EF 03 06 00 56 39 01 00 01 36 19 00
COMPUTER IN2 BE EF 03 06 00 FA 31 01 00 00 36 04 00 TEMPLATE BE EF 03 06 00 36 38 01 00 01 36 1B 00
LAN BE EF 03 06 00 0A 34 01 00 00 36 0B 00 RESOLUTION BE EF 03 06 00 66 3B 01 00 01 36 1E 00
USB TYPE A BE EF 03 06 00 9A 30 01 00 00 36 06 00 MIC VOLUME BE EF 03 06 00 66 25 01 00 01 36 36 00
ECO MODE BE EF 03 06 00 F6 24 01 00 01 36 37 00
75

USB TYPE B BE EF 03 06 00 3A 36 01 00 00 36 0C 00
HDMI BE EF 03 06 00 CA 33 01 00 00 36 03 00 Get BE EF 03 06 00 F5 32 02 00 01 36 00 00
COMPONENT BE EF 03 06 00 6A 30 01 00 00 36 05 00 COMPUTER IN1 BE EF 03 06 00 FA 38 01 00 20 36 00 00
S-VIDEO BE EF 03 06 00 5A 32 01 00 00 36 02 00 COMPUTER IN2 BE EF 03 06 00 3A 3A 01 00 20 36 04 00
VIDEO BE EF 03 06 00 AA 32 01 00 00 36 01 00 LAN BE EF 03 06 00 CA 3F 01 00 20 36 0B 00
SLIDESHOW BE EF 03 06 00 9A 2B 01 00 00 36 22 00 USB TYPE A BE EF 03 06 00 5A 3B 01 00 20 36 06 00
MY IMAGE BE EF 03 06 00 5A 3D 01 00 00 36 16 00 Set USB TYPE B BE EF 03 06 00 FA 3D 01 00 20 36 0C 00
MY SOURCE
Set MESSENGER BE EF 03 06 00 AA 29 01 00 00 36 25 00 HDMI BE EF 03 06 00 0A 38 01 00 20 36 03 00
MY BUTTON-1 COMPONENT BE EF 03 06 00 AA 3B 01 00 20 36 05 00
INFORMATION BE EF 03 06 00 FA 3E 01 00 00 36 10 00
AUTO KEYSTONE V BE EF 03 06 00 6A 3F 01 00 00 36 11 00 S-VIDEO BE EF 03 06 00 9A 39 01 00 20 36 02 00
MY MEMORY BE EF 03 06 00 9A 3F 01 00 00 36 12 00 VIDEO BE EF 03 06 00 6A 39 01 00 20 36 01 00
ACTIVE IRIS BE EF 03 06 00 AA 3D 01 00 00 36 15 00 Get BE EF 03 06 00 C9 38 02 00 20 36 00 00
PICTURE MODE BE EF 03 06 00 0A 3E 01 00 00 36 13 00 OFF BE EF 03 06 00 FF 3D 01 00 30 26 00 00
REMOTE FREQ. Set
FILTER RESET BE EF 03 06 00 3A 3C 01 00 00 36 14 00 ON BE EF 03 06 00 6F 3C 01 00 30 26 01 00
NORMAL
AV MUTE BE EF 03 06 00 AA 38 01 00 00 36 19 00 Get BE EF 03 06 00 CC 3D 02 00 30 26 00 00
TEMPLATE BE EF 03 06 00 CA 39 01 00 00 36 1B 00 OFF BE EF 03 06 00 03 3C 01 00 31 26 00 00
REMOTE FREQ. Set
RESOLUTION BE EF 03 06 00 9A 3A 01 00 00 36 1E 00 ON BE EF 03 06 00 93 3D 01 00 31 26 01 00
HIGH
MIC VOLUME BE EF 03 06 00 9A 24 01 00 00 36 36 00 Get BE EF 03 06 00 30 3C 02 00 31 26 00 00
ECO MODE BE EF 03 06 00 0A 25 01 00 00 36 37 00
Get BE EF 03 06 00 09 33 02 00 00 36 00 00

(continued on next page) (continued on next page)

(continued on next page)
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)
RS-232C Communication / Network command table (continued)
Command Data
Names Operation Type Header
CRC Action Type Setting code
OFF BE EF 03 06 00 3A C3 01 00 00 35 00 00
IMAGE-1 BE EF 03 06 00 AA C2 01 00 00 35 01 00
Set IMAGE-2 BE EF 03 06 00 5A C2 01 00 00 35 02 00
MY IMAGE
IMAGE-3 BE EF 03 06 00 CA C3 01 00 00 35 03 00
IMAGE-4 BE EF 03 06 00 FA C1 01 00 00 35 04 00
Get BE EF 03 06 00 09 C3 02 00 00 35 00 00
MY IMAGE
Execute BE EF 03 06 00 71 C3 06 00 01 35 00 00
IMAGE-1 Delete
MY IMAGE
Execute BE EF 03 06 00 35 C3 06 00 02 35 00 00
IMAGE-2 Delete
MY IMAGE
Execute BE EF 03 06 00 C9 C2 06 00 03 35 00 00
IMAGE-3 Delete
MY IMAGE
Execute BE EF 03 06 00 BD C3 06 00 04 35 00 00
IMAGE-4 Delete
76
 11. Block diagram

CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

RGB PWB MAIN PWB
RGBHV
㪤㫆㫅㫀㫋㫆㫉㩷㫆㫌㫋
DDC Flash ROM DDR2 CONTROL
㪚㫆㫄㫇㫌㫋㪼㫉㩷㫀㫅㪈 256Mbit 1Gbit BUTTON
INPUT PWB INV MUX 㪪㪧㪠
SN74LV14 THS7327 COLOR
VIDEO UNIFORMITY,
㪚㫆㫄㫇㫌㫋㪼㫉㩷㫀㫅㪉 TIMING S/H
S-VIDEO I2S 㪍㫇㪸㫀㫉㫏㪉㫃㪸㫅㪼㩷 GENERATOR, 㪍㫇㪸㫀㫉㫏㪉㫃㪸㫅㪼㩷
HDMI CXA3828R LCD PANEL
䌈䌄䌍䌉 10Bitx3 㪣㪭㪛㪪 GAMMA 㪣㪭㪛㪪
SII9127
CORRECTION
Component CXD3551
Video Y Y/C PWC970
Cb/Pb
A/D converter DC POWER
㪬㪪㪙㪄㪙 㪝㪘㪥
Cr/Pr Video decoder REGULATORs
SW Image_PROCESSOR 㪝㪘㪥
㪬㪪㪙㪄㪘 MIC2005A 㪝㪘㪥
MAIN CPU
SW DC FAN
㪣㪘㪥
Control RS-232C PHY
RTL820 Exhaust fan (axial)
Amp. Lamp fan (sirocco)
㪤㪠㪚㩷㪠㪥 L/R A_DAC I2S B Panel fan (sirocco)
NJM2783 G Sensor
UDA1334 ADXL337 RG Panel fan
77

Audio_in1
Audio in1 Vol. Cont
IR
with SW
RECEIVER
NJW1109
Audio_in2 SW SW
IR
Vol. Cont
RECEIVER
Audio_in3 L R with SW 㪂
R2A15908
Sub CPU
Audio_out L R uPD78F9222MC REMOTE PWB
MOTOR
AUD_Amp. DRIVER
Speaker
D510 uPD168110
CPLD

SENSOR PWB
outside temp.(duct) inside temp. (prism)
THERMISTOR THERMISTOR

AC IN

POWER UNIT POWER UNIT IRIS OPTICAL PROJECTION

(CIRCUIT) (BALLAST) Lamp UNIT UNIT LENS

Thermal SW
(TSW)
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

12. Connector connection diagram

LAN EU03 CNFL2 E080
EW32 1 Vcc 1
PWB
USB-A 2 BACK1 2
assembly
3 BACK2 3
SENSOR
USB-B EU01 4 GND 4
( Inside )

P601/P701
HDMI-IN EG01

P501
Computer IN1 ES01 EW31 E1
1 40 LCCOM 1 Vcc THERMISTOR
2 39 PSIG 2 Out (Outside)
Computer IN2 ES02 3 38 GND
4 37 VID-1
5 36 VID-2
CNRGB 6 35 VID-3 E801 #3030
MONITOR OUT ES03 1 R 1 ES03 7 34 VID-4 1 FAN1S
2 G 2 8 33 VID-5 LCD 2 Vcc(Cont䋩 DC FAN
3 B 3 9 32 VID-6 3 GND 䋨EXHAUST)
PWB 4 GND 4 10 31 VID-7 PANEL 4
assembly 5 H 5 11 30 VID-8 R/G/B
6 V 6 12 29 VID-9
RGB 7 GND 7 13 28 VID-10 E802 #3010
14 27 VID-11 1 FAN2S
DC FAN
15 26 VID-12 2 Vcc(Cont䋩
䋨B PANEL)
CNVID 16 25 HVDD 3 GND
VIDEO EV01 1 NC 1 EV01 17 24 DCLK2
2 NC 2 18 23 /DCLK2
S-VIVEO 3 Y 3 19 22 /DCLK1 E806 #3000
4 Cb/Pb 4 20 21 DCLK1 1 FAN3S
5 Cr/Pr 5 21 20 HCK1 2 Vcc(Cont䋩
DC FAN
Y 6 GND 6 22 19 HCK2 3 GND
䋨LAMP)
㪧㪮㪙㩷㪸㫊㫊㪼㫄㪹㫃㫐㩷㪠㪥㪧㪬㪫

7 SC 7 23 18 HST 4
Cb/Pb 8 SY 8 24 17 Vss(GND) 5
9 GND 9 25 16 GND
Cr/Pr 10 CVBS 10 26 15 Vss(GND)
27 14 ENB E807 #3020
28 13 VCK 1 FAN3S
DC FAN
CNAUD 29 12 VST 2 Vcc(Cont䋩
䋨R/G PANEL)
1 +8.5V 1 EA12 30 11 DWN 3 GND
AUDIO-IN3 R 2 GND 2 31 10 DIN
3 MIC 3 32 9 PC
AUDIO-IN3 L 4 MIC-GND 4 33 8 TEST1(NC) EA01 A83
5 AUDIO1-L 5 34 7 TEST2(NC) 1 L_Out- Speaker
AUDIO-OUT R 6 AUDIO1-R 5 35 6 RGT 2 L_Out+
7 AUDIO2-L 6 36 5 SOUT(NC)
AUDIO-OUT L EA03 8 AUDIO2-R 7 37 4 VDD
9 AUDIO3-L 8 38 3 LCCOM EA02 A84
AUDIO-IN1 10 AUDIO3-R 9 39 2 CFB 1 L_Out- Speaker
12 AUDIO-O-L
AUDIO OL 11 40 1 NC 2 L
L_Out
Out+
AUDIO-IN2 EA12 12 AUDIO-O-R 12

MIC-IN EP02 CNRC E002 IR01

assembly
REMOTE
EC09 CNUAR 1 GND 1

PWB
1 RXD 1 EP90 2 Front 38 2
RS-232C 2 TXD 2 3 5V 3
3 GND 3 PWB assembly MAIN 4 Front_56 4
4 +5V 4 IR02

CNGD1
MOTER1B 1 1P-Terminal
MOTER2B 2
MOTER2A 3 CNPW
IRIS UNIT MOTER1A 4 EW51 1 STB+5V
VCC 5 2 POW_SUBCPU
PS1 6 3 Fan_15V CNTS
Thermal
PI1 7 4 Fan_15V 1 TEMP OUT switch
5 FAN GND 2 TEMP RETURN (TSW)
6 FAN GND
7 17V
8 GND
E800 9 GND 䇭䇭䇭
10 GND
11 5.75V
POWER UNIT AC-IN
12 5.75V (CIRCUIT)
13 5.75V
14 5.75V
15 Audio-GND
16 Audio-GND
17 Audio-12V
18 Audio-12V
19 GND
20 Active
CNPFC
DC IN+

DC IN-
NC

E814 CNBAR 1 2 3
1 ON FLAG 1 X2 X1 X3 CNLAP
2 GND 2 1 OUT+ 1
3 +5V 3 2 NC 2
4 /LAMP ON 4 POWER UNIT 3 NC 3
5 /ECO 5 (BALLAST) 4 OUT- 4
LAMP UNIT
assembly

78
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

13. Basic circuit diagram Parts with hatching are not mounted.

UP DOWN
6 56.9KHz 38KHz 6
I002 I001
KSM-2003LM2EL KSM-2003LM2EL

Vout GND VCC Vout GND VCC

1 2 3 1 2 3
1 2 3 1 2 3

C012 C002
1 2 1 2
100p-C 100p-C
1005 C011 1005 C001
1 2 1 2
1.0/16 1.0/16
5 5
1 100 2

1 100 2

47 2

MVK/SKV
47/6.3
1
R012

1005

R002

1005

R001

2125

C003
2
1

4 1 4
APRC01
1
APRC02
1
APRC03
1
APRC04
502386-4H
1

4
E002

G1
G2
REMOTE1
GND

REMOTE2
+5V VCC

3 3
PWB assembly REMOTE

2 2

1 1

A B C D E

79
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

47p-C

47p-C
2

2
CJ51

1005

CJ52

1005
EJ51

1
3114-15FABNS1XN

EJ52
15 G2 5 502386-7H
SCL GND
G2
10
G1
SYNC
V14 GND HJ01
4
SC100JT
VCLK 2125 7
HJ02
9
5 SC100JT
1 3
2 6
V
5
PLUG 2125
13 3 1 3 H
B 2 5
H B
GND

47p-C
HJ03

2
CJ55

1005
8
SC100JT
2125 4
12 2 1 1 3 HJ04 B
2
SDA G/Y G/Y SC100JT 3
GND 2125

47p-C
2
CJ54

1005
7 1 3 HJ05 G
2 2
SC100JT
1
2125
11 1 1 3 R
R 2 1
GND R

47p-C
2
CJ53

1005
6
G1
1

4 GND1
4

PWB assembly RGB

3 E080 3
501331-04V

+15V 1

Vsens 2
R081
10k
3 1 2
2
4
6
8

2
4
6
8

2
4
6
8

2
4
6
8

2
4
6
8

2
4
6
8

SENS
2010

2010

2010

2010

2010

2010
R082

R083

R084
4.7k

R085
4.7k

R086
4.7k

R087
4.7k
560

560

1005
4
GND
3

3
5

5
1

G1
G2

2 PWB assembly SENSOR 2

1 1

A B C D E

80
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

5 5

4 4

3 3

2 2

1 1

POWER UNIT (BALLAST) 1

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

5 5

4 4

3 3

2 2

1 1

POWER UNIT (BALLAST) 2

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

5 5

4 4

3 3

2 2

1 1

POWER UNIT CIRCUIT

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

APC50

Input

1
+2.5V

APC21 APC23 +8.5V EC05 PlugInPower

APC20 APC22 APC24 Jumper LPR6520-G010F

1
APC53
EC02

1
EC07
Component-Cr

1
LC21
1 2
600 22
HSJ1003-01-010 502382-12V
44 1608
APC71 1 APC52
66 1 +8.5V
RGB Audio IN1 55
LC22
1 2
600

1
11
1608 APC72 1 2 GND Component-Cb 33
APC51
LC23 2 APC73 1
33 1 600 3 MIC_LINE EC08

1
44
RGB Audio IN2 1608 502382-10V
77
APC74 1 Conponent-Y APC81 1

5 5
88 4 MIC 11
1 NC
LC24 2
22 1 600 APC82 1
1608 APC75 1 5 2
Audio_1-L PLUG_PWR
GND1 APC83 1
APC76 1 6 Audio_1-R 3 Y
APC40
EC03 1 APC84 1
APC77 7 Audio_2-L 4 Cb/Pb
YKC21-4608N

1
APC85 1
2 2 1
APC78 8 Audio_2-R 5 Cr/Pr
2
Audio3(IN)-L APC31
Jumper APC79 1 9 Audio_3-L
22
11
6 GND
APC43 APC87 1
APC7A 1
W 10 Audio_3-R
SY/SC 7
1

LC11
1 2
600
2 1
SC

1
3 3 1608
1 55 APC88 1
APC7C 11 Audio_O-L C Y 8
APC32
4 3
APC42 SY
APC89 1
Audio3(IN)-R 4 4
APC7E 1 12 Audio_O-R 9

1
1

LC12
1 2
600 33 GND
1608 APC8A 1
1 1 44
10
R G1
APC41 CVBS
EC13 G2
APC33
YKC21-4042V

1
G1

CVBS
1

LC13
1 2
600 GND1 77 G2
1608
Audio-OUT L 22
APC34
W

4 4
66
1

LC14
Audio-OUT R 33 1 2
600
1608
LAP5100-0701F
EC04
R 11

GND1
GND1
long pin:R
short pin:L
GND1

+8.5V
0 2
RC14

1005
2SC4617
1

QC21

2
3
1
0.0V
10k
2 1005 1
RC28

0.1/16
2
APC60

CC02

1005
EC06
CC08
1 2 3175-09M

1
100p-C RC09 RC10 G1 IC01

0.1/16
2
CC01

1005
RC08 1005 ADM202EARNZ
1.0k 1470k-1%
12470k-1%
2 1
IC10 EC09

1
3 3
1005 1005 1 C1+ VCC 16
2 1005 1 NJM2783V APC91 1 ZH-04V

0.1/16
RC13 6

2
APC61

CC03

1005
CC11 CC18 1 RXD
1 330 2 2 V+ GND 15
16.8k-1%2

14 IN GAIN1 1
RD

1
2 1 1 2 1

1
APC92
RC12

1005
RC15 0.47/50 1005 2.2/50 2
2 TXD
RC30 RC20 1 47k 2 MVK/SKV WT 3 C1- T1OUT 14
13 GAIN_SW GAIN2 2
+2.5V
1 100 2 1 0 2
1005 CC12
1.0/16 RC31 Contol 7 APC62 APC94 1
3 GND

0.1/16
RC16 1 2 4 C2+ R1IN 13

2
1005 1005 IC20 11.0k-1%2

CC04

1005
1
TD
1.0/16

12 INT DET 3 APC93

RS232C
2

1
1 47k 2
CC17

TK11125CSC 3
1 6.8k 2

RC11 4
CC16 1005 STB+5V

1
2SA1774 RC22

1005

1005 1100k-1%2 1 2 5 C2- R1OUT 12

1

1 Vcont Vin 5 11 SENSE OUT 4 RC03

1005 4.7/16 8
1 3.3k 2
1.0/16

RC34
CC22

CC13
2

1 2 2125 6 V- T1IN 11 G1
2 GND 10 VREF BUFFIN 5 11.0k-1%2 RC01 1005 RC04
QC20

CC24 RC32 4 G2
1

10/16 1 100 2 2 100 1

0.1/16
2

1005
CC09

1005

1 2 2125 16.8k-1%2 7 T2OUT T2IN 10

3 Np Vout 4 9 V+ BUFFGAIN 6
1005 RC02 RC05 1005
RC21 1 1005 RC35 9
1

1 100 2 2 100 1
10/16

2200p
2

1 100 2
CC23

2125

1005 1 0 2 8 R2IN R2OUT 9

PlugInPower 3 8 GND BUFFOUT 7
4.7/6.3

5 1005 1005
1

1005 1005
1
CC06

1 3.3k 2
2

RC06

1005
CC10
2

0.1/16
1 2 G2

1
CC05

1005
MVK/SKV

10/16
2
CC32 1.0k-1%

2
2125
RC33

0.47/50 1005
0.47/50
1
CC31

GND1
APC12 LC01
1

MVK/SKV
2

600
1

1 2 GND1
1

EC01 GND1
1608
2
2 UDZS6.2B

JY-3542*01-250
3
1 1.0k 2

MVK/SKV
0.1/50
1

2 2
1
DC02

RC23

1005

CC21

5 LC02 RC36
4
1 1.0k 2

600
2

0 2
UDZS6.2B 2

1 2 1
RC07

1005

2
DC01

1608 1005
APC11
1

GND1

KIKU2C
1

KIKU1C
1

GND1

1 1

PWB assembly INPUT

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

1C2012
0.01/25
+3.3V
I210 1005

PWC970
MX25L25635E

1 R201 2

1 R202 2
L201

1005

1005
1 R263 2

6 6

10k

10k
+5V 600 1 HOLD#/SIO3 SCLK 16
10k
SHEET_3,4,5,8,9,10,12 1608 1005
R204 R205 1 2
IRIS_CLK +3.3V 2 VCC SI/SIO0 15
1 33 2 1 33 2 1STEPDIM_RXD R262

CHRXD0

CHTXD0
R203 1005 1005 R206 0
IRIS_CW RST_N 3 RESET# NC-14 14
1 33 2 1 33 2 I201 2 10051
1STEPDIM_TXD
PWC970

2 10k 1005
1005 1005 1 R264 2
4 NC-4 NC-13 13
10k
PWC970 ‫ ޣ‬Peripherals ‫ ޤ‬5/8

1
1

1.0/10
2
C202

R265
1005

ZH-04V
5 NC-5 NC-12 12

GND1
Debug
AD2 AD2 AD3 AD3

1
RXD0 I/O PD PD I/O PORTF6
AA5 AA5 TXD0 I/O PD W5 W5 NC-6 NC-11 11
PD I/O PORTF7

4
6

E201
R207 R266 GND1

GND1
G1
G2
R208 1 33 2 AD1 AD1 T5 R267 0
RXD_CTI0 RXD1 I/O PD PD I/O SSPFSSOUT T5 7 CS# GND 10
1 33 2 1005 Y5 Y5 R3 0 2 10051
TXD_CTI0 TXD1 I/O PD PD I SSPRXD R3
1005 2 1005 1 R268
O SSPTXD R2 R2 8 SO/SIO1 WP#/SIO2 9
R269 2 0 1
O SSPCLK R1 R1
2 0 1 1005
1005
AF23 AF23 IRRCVR0 I/O PD H24 H24
PD I/O MIMDC MIMDC
AF22 AF22 IRRCVR1 I/O PD G24 G24
PU I/O MIMDIO MIMDIO +3.3V
1 R210 2 R212
PWRC +3.3V
33 33 I201

1 R2A1 2

1 R2A2 2

1 R2A3 2
1005 PD I MIREFCLK H26 H26

1005

1005

1005
1005 C203 PWC970

10k

10k

10k
1 2 AF3
I220 TC7SZ14FU LACH-CPLD AF3 PORTA0 I/O PD O RMIICLKO J24 J24 X201 NZ2520S 1 2
KEYI-RGT AD6
AE5
AD6 PORTA1 I/O PD
0.01/25
PWC970 ‫ ޣ‬Display Port ‫ ޤ‬4/8
1 NC VCC 5 KEYI-LFT AE5 PORTA2 I/O PD PD I/O MIRXD0 J25 J25 MIRXD0 DVS
AF4 1005 R2A4
KEYI-DWN AF4 PORTA3 I/O PD PD I/O MIRXD1 K25 K25 MIRXD1 11 Standby VDD 44 O DCLKOUT AE3 AE3
AD7 4.7k R2A5
2 IN_A KEYI-UP AD7 PORTA4 I/O PD PD I/O MICRSDV J26 J26 MICRSDV R270 PD I/O DVS AC3 AC3
AE6 22 50MHz 1 2 2 10051 4.7k R2A6
R211 KEYI-INP AE6 PORTA5 I/O PD GND OUTPUT 33 MMREFCLK PD I/O DHS AC4 AC4

GND1
GND OUT_Y
1 2 R233 AF5 AF5 PORTA6 I/O G26 G26 33 AE2 2 10051 4.7k
PD I/O MITXD0 PD I/O DEN AE2

5 5
3 4 PD MITXD0
2 1.0k 1 AF6 1005 2 10051
33 FG_SEL4 AF6 PORTA7 I/O PD PD I/O MITXD1 H25 H25 MITXD1
1005 1005
PD I/O MITXEN G25 G25 MITXEN O DR0 T1 T1
AE7 R271 T2
RGB_COMP AE7 PORTB0 I/O PD O DR1 T2
2 1 AD8 1 0 2
C220 2SA1774EBTL R220 CH3_CUT AD8 PORTB1 I/O PD I USB0ID AF9 AF9 O DR2/TXOCP T3 T3 LICK1_P
AF7 1005 GND1
GND1 0.1/16 Q205 10k CH2_CUT AF7 PORTB2 I/O PD I/O USB0VBUS AD11 AD11 USB0VBUS O DR3/TXOCM T4 T4 LICK1_N
1005 1 2 USB D+

2
CH1_CUT AE8 AE8 PORTB3 I/O I/O USB0DP AF10 AF10 USB0DP O DR4/TXO2P U1 U1 LIRC1_P

GND1
PD
1005 MUTE AF8 AF8 PORTB4 I/O PD I/O USB0DN AE10 AE10 USB0DM O DR5/TXO2M U2 U2 LIRC1_N
AC9 C204
1 2 R272 USB D-
AC11 AC11 U3

3
SP_OFF AC9 PORTB5 I/O PD I/O USB0_TEST O DR6/TXO3P U3 LIRD1_P
1 R217 2 1 R219 2 AD9 10p-C 2 1 R273 2
13.3k-1%
FAN_FG2-B KEYI-POW RESETP AD9 PORTB6 I/O PD I USB0REXT AB11 AB11 O DR7/TXO3M U4 U4 LIRD1_N
33 10k 1005 AE9 1005 1005 2.7k-1% V1
+3.3V PHY_RST AE9 PORTB7 I/O PD O DR8/TXO4P V1 LIRE1_P
1005 R2741 0 2 1005 GND1
PWM_G I USB1ID AE14 AE14 O DR9/TXO4M V2 V2 LIRE1_N
0 1005
PWM_CPLD FAN-CNT1 AC5 AC5 DAC0 O I/O USB1VBUS AD12 AD12 USB1VBUS

1005

1005

1005

1005

1005

1005
AD4 AD4 DAC1 O I/O USB1DP AF12 AF12 USB D+ V3
C222 FAN-CNT2 USB1DP PD I/O DG0/PF0 V3 HEATER_HIGH
1 2

1 R222 2

2
AD5 AD5 DAC2 O I/O USB1DN AE12 AE12 V4
FAN-CNT3 USB1DM PD I/O DG1/PF1 V4 HEATER_MID

1 R223

1 R224

1 R225

1 R226

1 R227

1 R228
10k

10k

10k

10k

10k

10k
1005
1.0/10 C205
1 2 USB D-

1 R221 2
10k
FAN-CNT4 AE4 AE4 DAC3 O I/O USB1_TEST AC12 AC12 O DG2/TXE3P W1 W1 LIRD0_P
C223
1 R275 2 1 R276 2

1005
1 2 10p-C

10k
I USB1REXT AB12 AB12 O DG3/TXE3M W2 W2 LIRD0_N
1.0/10 AB7 1005 3.3k-1% 2.7k-1% W3
AB7 DNC_35 - 1005 1005 O DG4/TXE4P W3 LIRE0_P
1 R2A8 2 AC7 GND1
AC7 DNC_36 - - DNC_39 M25 M25 LAMP_POW O DG5/TXE4M W4 W4 LIRE0_N
10k 1005 1 R229 2 AB8 SHEET_4 Y1
AB8 DNC_37 - O DG6/TXO0P Y1 LIRA1_P
1 R230 2 10k 1005 R2E8 1 2 2 R277 1
AC8 AC8 DNC_38 - P1 P1 Y2
PU I/O PORTG2 LAMP_ON O DG7/TXO0M Y2 LIRA1_N
10k 1005 1 R231 2 33 1005 2 R278 1 100
PU I/O PORTG3 P2 P2 C206 O DG8/TXO1P Y3 Y3 LIRB1_P

GND1
GND1

1 R232 2 10k 1005 AD21 AD21 2 1 4.7k 1005 Y4

PWM0 I/O PD O DG9/TXO1M Y4 LIRB1_N
10k 1005 1005 R213 1005
AD20 AD20 PWM1 I/O PD 100p-C
1005 0
I/O PORTC0 L26 L26 FREQ_SEL AA1
PU PD I/O DB0/PG6 AA1
5 6 R234 M26 M26 M24 2 1USB_PWR_PL AA2
FG_SEL0 PORTE0 I/O PU PU I/O PORTC1 M24 PD I/O DB1/PG7 AA2

4 4
1 2 1.0k AE22 AE22 K26 AA3
FG_SEL3 PORTE2 I/O PD PU I/O PORTC2 K26 USB_PWR O DB2/TXE0P AA3 LIRA0_P
7 8 ಲ2010 AB17 AB17 M23 AA4
FG_SEL2 PORTE3 I/O PD PU I/O PORTC3 M23 STB-CTL2 O DB3/TXE0M AA4 LIRA0_N
3 4 AE21 AE21 L25 AB1
FG_SEL1 PORTE4 I/O PD PU I/O PORTC4 L25 STB-CTL1 O DB4/TXE1P AB1 LIRB0_P
DATA-A AC18 AC18 PORTE5 I/O I/O PORTC5 M22 M22 PWR-RQ +3.3V O DB5/TXE1M AB2 AB2 LIRB0_N
PD PU
I/O PORTC6 L24 L24 HDMI_RST P+3.3V O DB6/TXECP AC1 AC1 LICK0_P
R238 PU
GSENSOR AB15 AB15 ADC0 I PU I/O PORTC7 L23 L23 HPD_RST O DB7/TXECM AC2 AC2 LICK0_N

3.3k 1005

3.3k 1005

3.3k 1005

3.3k 1005
1.0k
2 10051 R239 AD17 AD17 AB3
IRIS_PI1 ADC1 I O DB8/TXE2P AB3 LIRC0_P
R240 2 1.0k 1005

1 R283 2

1 R284 2

1 R285 2

1 R286 2
1 AE18 AE18 ADC2 I O DB9/TXE2M AB4 AB4 LIRC0_N
INTEMP
R241 2 1.0k1 1005 AC17 AC17
OUTTEMP ADC3 I O THRWSC C19 C19
1.0k
2 10051 R242 AF20 AF20 R279
ADC4 I O RPIATEST AB5 AB5
2 1.0k 1005
1 R243 1 33 2 R280
AF21 AF21 ADC5 I PD I/O TWOWSC0 R5 R5 I2CCLKP
R244 2 1.0k11005 1005 1 33 2 R2A7 R2E7

2
AC16 AC16 ADC6 I PD I/O TWOWSD0 R4 R4 I2CDATP
1.0k
2 1005 1 R245 1005 13k-1% 13k-1%
LVL_AUDIO AD18 AD18 ADC7 I

1005
1 R281 2
1005
1005

1005

1005
1005
1005

2 1.0k 1005 1005 1005

1005

1 P4 P4
PD I/O TWOWSC2 I2CCLK
2

0.1/16
1 R282 2

1
AB16 AB16 33
ADC_REFH I PD I/O TWOWSD2 P3 P3 I2CDAT
1005
0.1/16
0.1/16

33
0.1/16

0.1/16

0.1/16
0.1/16
0.1/16
C225

C226

AE20 AE20
C227

C228

C229
1

C2321
C231
C230

ADC_REFL I GND1 GND1

R246 1005
10k 1 2 I201
D15 D15 L3 L3
GND1

TM2 I I AFE_TEST3 +3.3V

2 1005 1 3 4 PWC970
C16 C16 TM3 I I AFE_TEST4 L4 L4
5 6
2 R247 1
PWC970 ‫ ޣ‬Digital Input Port ‫ ޤ‬1/8

0.1/16
2
10k

1005
7 8
C224
+3.3V B18 B18 DNC_1 - I AFE_TEST5 K3 K3
1005
1 C18 C18 DNC_2 - I AFE_TEST6 K2 K2 R287 B16 B16 INCLP O I INCLK A4 A4 HDMI_CLK
PD
1 R248 2 C17 3.3k A17 A17 A14
+3.3A C17 DNC_3 - INCST O PD I INPEN A14 HDMI_DE
0 D16 ಲ2010 A15 A15 B15
1005 D16 DNC_4 - INVBI I PD PD I INAHS B15
D18 D18 DNC_5 - I INHS C15 C15 HDMI_H
PD
R297 PD I INVS A18 A18 HDMI_V
1 33 2 L1 L1
HD_BCLK I2SICLK0 I PD - DNC_6 D17 D17 PD I INFLD A16 A16 HDMI_FLD

3 3
1 R298 2 1005 L2 L2
HD_LRCLK I2SIWS0 I/O PD - DNC_7 E18 E18
1 R299 2 33 K1 K1
HD_SDAT I2SID0 I/O PD
33 1005
1005 P5 P5 1 R2A9 2
I2SICLK1 I PD O I2SOCLK N3 N3 I2SOCLK PD I INR0 H1 H1 HDMI_CR0
R215 N1 N1 33 1 R2B1 2
MIC_L/H I2SIWS1 I/O PD PD I/O I2SOWS M1 M1 I2SOWS PD I INR1 J2 J2 HDMI_CR1
1 0 2 1005 R214 N2 N2 1005 33 1 R2B2 2
CLK-A I2SID1 I/O PD PD I/O I2SOD M2 M2 I2SOD PD I INR2 G1 G1 HDMI_CR2
1 0 2 1005 1005 33 I INR3 F1 F1
PD HDMI_CR3
1005 H2
PD I INR4 H2 HDMI_CR4
I INR5 G2 G2 HDMI_CR5
PD
I INR6 E1 E1 HDMI_CR6
PD
I INR7 H3 H3 HDMI_CR7
I201 PD
I INR8 F2 F2 HDMI_CR8
PWC970 PD
RST_N I INR9 D1 D1 HDMI_CR9
PD

R252
PWC970 ‫ ޣ‬CPU ‫ ޤ‬3/8 K5
R250 R288 PD I ING0 K5 HDMI_Y0
1 2 1 0 2 J1 J1
RESETN RESETN I/O PU I TM4 C25 C25 +3.3V PD I ING1 J4 J4 HDMI_Y1
0 1005 2 10k 1 F3
1005 PD I ING2 F3 HDMI_Y2
R253 D24 1005 G3
- DNC_8 D24 PD I ING3 G3 HDMI_Y3
R251 1 33 2 AF24 AF24 E23 H4
USB_INT_PL EXTINT0 I/O PD - DNC_9 E23 PD I ING4 H4 HDMI_Y4
1 10k 2 1
R2E1 2 1005 AC19 AC19 B25 J5
+3.3V RTC_INTR EXTINT1 I/O PD - DNC_10 B25 PD I ING5 J5 HDMI_Y5
1005 33 - DNC_11 F22 F22 I ING6 F4 F4
C211 1005 PD HDMI_Y6
1 2 C24 Q204 G4
2 R249 33 - DNC_12 C24 PD I ING7 G4 HDMI_Y7
1 2 DTA114YEBTL
CHTM3.3 0.01/25 HDMI_INT - DNC_13 D23 D23 I ING8 H5 H5 HDMI_Y8
1 PD
3 1005 B24 1 G5
1005 - DNC_14 B24 PD I ING9 G5 HDMI_Y9
R2B3 33 E22
1 21005 - DNC_15 E22
1 CHTRST C23 3 C1
1 R2B4
1 33 2 - DNC_16 C23 PD I INB0 C1 HDMI_CB0
CHTDGND F21 E2
Q201 1 - DNC_17 F21 PD I INB1 E2 HDMI_CB1

2 2
6 1005 2
GND1

R256 5 M3 A24 D2
DTC114EEBTL M3 TRSTN_C I PU - DNC_18 A24 PD I INB2 D2 HDMI_CB2
10k 3 4 M5 D22 C2
M5 TRSTN_G I PU - DNC_19 D22 R2891 PD I INB3 C2 HDMI_CB3
1 ಲ2010 1 2 CHTDI M4 B23 2 E3
1 M4 TDI I PD - DNC_20 B23 PD I INB4 E3 HDMI_CB4
R255 7 8 CHTCK L5 E21 47k D3
0 GND1 1 L5 TCK I PD - DNC_21 E21 PD I INB5 D3 HDMI_CB5
1 10k 2
R257 1005
CHSRSTN J3 J3 TMS_C I - DNC_22 C22 C22 2 I INB6 C3 C3 HDMI_CB6
PU PD
1 1 1005 2 1005 1 R2B5 2 N5 A23 R290 B3
+3.3V N5 TMS_G I PU - DNC_23 A23 PD I INB7 B3 HDMI_CB7
R2B7 1 R2B6 2 10k K4 D21 3 1 33 2 A3
K4 TDO_C O - DNC_24 D21 UART PD I INB8 A3 HDMI_CB8
1 33 2 33 1005 1005 N4 B22 E4
CHTDO N4 TDO_G O - DNC_25 B22 1005 PD I INB9 E4 HDMI_CB9
1

MC2846-T111-1

MC2846-T111-1
1005 D20 1

D202

D201
- DNC_26 D20
R2B8 C21
33 - DNC_27 C21 Q202
R2B9 1 2 A22 KIKU1C KIKU1S KIKU3S
- DNC_28 A22
3

3
1 33 2 DTC114EEBTL
CHTMS 1005 - DNC_29 E20 E20 GND1 1 1 1
1 1005 B21
- DNC_30 B21
2

1
B19 B19 F26 KIKU2C KIKU2S
TM0 I PD I/O PORTI0 F26 POWER_A
B17 B17 TM1 I I/O PORTI1 E26 E26 POWER7 1 1
PD

0V

2
4
6
8
J23

ಲ2010
PD I/O PORTI2 J23 POWER6

R2E2
F25

0
PD I/O PORTI3 F25 POWER5
R258 H23 3 4 KIKU3C
PD I/O PORTI4 H23 POWER4

3
5
1

7
10k H22 1 2R291 1
SHEET_2,3,4,5,8,9,10,11,12,13,14,15 +3.3V PD I/O PORTI5 H22 POWER3
2 10051 D26 7 8 1.0k
PD I/O PORTI6 D26 POWER2
E25 5 6ಲ2010
PD I/O PORTI7 E25 POWER1
R259 KIKU4C KIKU4S
0 R292
GND1

A19 A19 F24 1 2 1 1

PORENN I PD I/O PORTJ0 F24 I2CDATM
2 1005 1 J22 33 1 R293 2
PD I/O PORTJ1 J22 I2CCLKM
G23 1005 33 1005 2C2071
PD I/O PORTJ2 G23 LED-P-R
G1 I/O PORTJ3 C26 C26 LED-P-G 0.01/25
PD 1005

1 1
C209 D25 GND1
GND1

G2 1 2 PD I/O PORTJ4 D25 LED-TEMP 2SA1774EBTL 1

E24 2 R296 1
G3 X202 PD I/O PORTJ5 E24 LED-LAMP Q203 NO-COVER
8.0p-C 1 R294 2 3 10k
G4 24.000MHZ I/O PORTJ6 F23 F23 LAMP-S
1005 PD 2 1005
AF15 AF15 G22 0
1 1 4 4 XIN I PD I/O PORTJ7 G22
2 1005 1
1.0M-1%

N201 1005
R260

2 3
C18_IC_SHIELD GND1
1

A20
1.0/10

2 3 - DNC_31 A20

PWB assembly MAIN 1

1

1005
C208

R295
10k

R261 B20
C210 NX3225GA - DNC_32 B20
GND1

1 2 1 470 2 AE15 AE15 C20

2

XOUT O - DNC_33 C20

2

8.0p-C 1005 - DNC_34 A21 A21

1005
GND1 GND1

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

I201
PWC970

PWC970 ‫ ޣ‬Power Block1 ‫ ޤ‬7/8

E14 E14
F8 F8
ADCAVSS_1
ADCAVSS_2
GND
GND
P
P
ADCAVDD33_1
ADCAVDD33_2
D14 D14
F9 F9
C2B1
1

C2B3
1
0.1/16
2
1005
20.1/16
C2B2
1 0.1/16
2
1005
2
L2C1
600

1608
1
PWC970 POWER&DDR2
C6 C6 AVSSP GND P AVDDP C7 C7
1005
B5 B5 2 L2C3 1
VSSCP GND P VDDCP A5 A5

6
C2B4

6
1 0.1/16
2 600 1608
L2C4
E8 E8 1005 2 1
ADVSS18 GND P ADVDD18 D8 D8
C2B51 20.1/16 600 1608
B14 C14 1005 1 L2C5 2
B14 AVSS18_1 GND P AVDD18R_1 C14

0.1/10

0.1/10
1005

1005
470p

1005
470p

1005
D10 E12 C2B6 10/6.3 600 2125 L2E5
D10 AVSS18_2 GND P AVDD18G_1 E12 C2R4
D12 E10 C2B7 1.0/10 2 1 2125 R2D9 600
D12 AVSS18_3 GND P AVDD18B_1 E10 1.0/6.3-X6S
E9 E13 2 1 C2B8
1 0.1/16
2 1 1.0k 21 1608 2 1 2
E9 AVSS18_4 GND P AVDD18R_2 E13
C2B9
1 0.01/16
2 1005

1 1.0k 2
E11 E11 AVSS18_5 GND P AVDD18G_2 D11 D11 1005 0816

0.1/10
2

2
C2P6

C2P8
I201

C2P7

C2P9

R2D8

1005

C2R1

1005
C2C1
1 21000p 1005 I2A1 C2R5
E15 E15 AVSS18_6 GND P AVDD18B_2 D9 D9
1005 L2C6 PWC970 W971GG6JB 0.01/25

1
600
1 2 110052
A1
A2
A1 VSS_1 GND P VDD1V_C_1 L14 L14
C2C3 1.0/10 PWC970 ‫ ޣ‬Main Memory Port ‫ ޤ‬6/8 1
MD15 MA12
A2 VSS_2 GND P VDD1V_C_2 M13 M13 2125 1
GND1
B9 B9 DQ15 A12 R2 R2
2 1 C2C4
1 0.1/16
2 MD0 MD14 MA11
A25 A25 VSS_3 GND P VDD1V_C_3 M15 M15 P24 P24 MD0 I/O P MVREF0 V21 V21 B1 B1 DQ14 A11 P7 P7
1005 MD1 GND1 MD13 MA10
A26 A26 VSS_4 GND AA26 AA26 MD1 I/O P MVREF1 AA19 AA19 D9 D9 DQ13 A10 M2 M2
MD2 MD12 MA9
B1 B1 VSS_5 GND P25 P25 MD2 I/O D1 D1 DQ12 A9 P3 P3
L2C7 MD3 R2C5 22 1005
B26 AA25 AA25 1 2 R2C6 MCKP MD11 MA8
B26 VSS_6 GND 600 MD3 I/O O MCKP AE26 AE26 D3 D3 DQ11 A8 P8 P8
2 1 MD4 1 22 2 MD10 MA7
C4 C4 VSS_7 GND P VDDIO_C_1 B2 B2 AA24 AA24 MD4 I/O O MCKN AD26 AD26 R2C7 D7 D7 DQ10 A7 P2 P2
MD5 1 221005
2 MCKN MD9 MA6
D5 D5 VSS_8 GND P VDDIO_C_2 B4 B4 1608 P26 P26 MD5 I/O O MCKE V22 V22 1005 C2 C2 DQ9 A6 N7 N7
C2C6 10/6.3 MD6 1 2 R2C8 MWE MD8 MA5
D19 D19 VSS_9 GND P VDDIO_C_3 C5 C5 Y24 Y24 MD6 I/O C8 C8 DQ8 A5 N3 N3
2 12125 MD7 3 4 82 MCKE MD7 MA4
E17 E17 VSS_10 GND P VDDIO_C_4 D4 D4 R26 R26 MD7 I/O O MRAS AE25 AE25 F9 F9 DQ7 A4 N8 N8
C2C7 1.0/10 MD8 5 6 ಲ2010 MB0 MD6 MA3
F19 F19 VSS_11 GND P VDDIO_C_5 E5 E5 T26 T26 MD8 I/O O MCAS AD24 AD24 F1 F1 DQ6 A3 N2 N2
2 1 MD9 7 8 MB2 MD5 MA2
G21 G21 VSS_12 GND P VDDIO_C_6 E16 E16 W24 W24 MD9 I/O O MWE AA22 AA22 H9 H9 DQ5 A2 M7 M7
C2C8
1 0.1/16
2 MD10 MD4 MA1
H6 H6 VSS_13 GND P VDDIO_C_7 F18 F18 R24 R24 MD10 I/O O MCS AD23 AD23 H1 H1 DQ4 A1 M3 M3
1005 MD11 R2C9 82 1005 MRAS MD3 MA0
J9 J6 Y25 Y25 1 2
J9 VSS_14 GND P VDDIO_C_8 J6 MD11 I/O O MODT AE24 AE24 H3 H3 DQ3 A0 M8 M8
C2R6
C2C9
1 2
0.01/16 MD12 1
R2D1 2 MODT MD2 1 2
J11 J11 VSS_15 GND Y26 Y26 MD12 I/O H7 H7 DQ2
1005 MD13 82 1005 MDM0 MD1 1.0/6.3-X6S MWE
J13 J13 VSS_16 GND C2D1
1 1000p
2 R25 R25 MD13 I/O O MDM0 U24 U24 G2 G2 DQ1 /WE K3 K3

5 5
MD14 MDM1 MD0 0816 MCAS
J15 J15 VSS_17 GND 1005 W25 W25 MD14 I/O O MDM1 W26 W26 G8 G8 DQ0 /CAS L7 L7
L2C8 MD15 MRAS
J17 J18 1 2 T24 T24 K7
J17 VSS_18 GND P VDD1V_G_1 J18 MD15 I/O /RAS K7
MDQSP0 MDQSP0 MCS
J21 J21 VSS_19 GND P VDD1V_G_2 K17 K17 BLM31PG601SN1L I/O MDQSP0 V25 V25 F7 F7 LDQS /CS L8 L8
C2D5 10/6.3 MDQSN0 MDQSP1 MB1
K10 K10 VSS_20 GND P VDD1V_G_3 L16 L16 3216 I/O MDQSN0 V26 V26 B7 B7 UDQS BA1 L3 L3
MDQSP1 MDQSN0 MB0 R2D6
K12 L18 2 2125
1 U25 E8 L2
K12 VSS_21 GND P VDD1V_G_4 L18 I/O MDQSP1 U25 E8 /LDQS BA0 L2 51-1%
C2D6 1.0/10 MDQSN1 MDQSN1 MCKP MCKP
1 2
K14 K14 VSS_22 GND P VDD1V_G_5 M17 M17 I/O MDQSN1 U26 U26 A8 A8 /UDQS CLK J8 J8
MCKN MCKN1 1005
2
K16 K16 VSS_23 GND P VDD1V_G_6 N10 N10 2 1 /CLK K8 K8
C2D7
1 0.1/16
2 1 2 R2D2 MB1 MDM0 MCKE R2D7
K18 K18 VSS_24 GND P VDD1V_G_7 N12 N12 O MA0 AD25 AD25 F3 F3 K2 K2

0.1/10
LDM CKE

2
MA10 MDM1 MODT

C2S3

1005
K23 N14 1005 3 4 82 51-1%
K23 VSS_25 GND P VDD1V_G_8 N14 O MA1 Y23 Y23 B3 B3 UDM ODT K9 K9
1005
C2D8
1 2
0.01/16 5 6 ಲ2010 MA3 C2S5
L9 N16 AC23 AC23

1
L9 VSS_26 GND P VDD1V_G_9 N16 O MA2 1 2 470p
1005 7 8 MA7
L11 L11 VSS_27 GND P VDD1V_G_10 N18 N18 O MA3 U22 U22 J2 J2 VREF
C2D9
1 1000p
2 1 2 R2D3 MA12 C2S6 1005
J1 J1 R2S7

1.0/6.3-X6S
L13 P9 AC24 AC24 1

470p
L13 VSS_28 GND P VDD1V_G_11 P9 O MA4

0.1/10
VDDL 1 2

2
1005
MA9

1005
L15 P11 1005 3 4 82 1 0 2 0.1/10
L15 VSS_29 GND P VDD1V_G_12 P11 O MA5 W23 W23 A9 A9 VDDQ-A9
GND1
C2E1
1 0.1/16
2 5 6 ಲ2010 MA5 1005
L17 P13 AC25 AC25 C1 J7 J7 1005

1
L17 VSS_30 GND P VDD1V_G_13 P13 O MA6 C1 VDDQ-C1 VSSDL C2S7

C2R2
1005 7 8 MA1 1 2
L22 L22 VSS_31 GND P VDD1V_G_14 P15 P15 core1.0V O MA7 U23 U23 C3 C3 VDDQ-C3
MA2

C2R3

C2W5
M10 P17 1 2 R2D4
M10 VSS_32 GND P VDD1V_G_15 P17 O MA8 AC26 AC26 1 C7 C7 VDDQ-C7 VDD-A1 A1 A1
1.0/6.3-X6S
3 4 82 MA6
M12 M12 VSS_33 GND P VDD1V_G_16 R10 R10 O MA9 W22 W22 C9 C9 VDDQ-C9 VDD-E1 E1 E1
5 6 ಲ2010 MA11 GND1
M14 M14 VSS_34 GND P VDD1V_G_17 R12 R12 O MA10 Y22 Y22 E9 E9 VDDQ-E9 VDD-J9 J9 J9
7 8 MA8
M16 M16 VSS_35 GND P VDD1V_G_18 R14 R14 O MA11 AB22 AB22 VDD-M9 M9 M9
M18 R16 C2R7
M18 VSS_36 GND P VDD1V_G_19 R16 O MA12 V23 V23 G1 G1 VDDQ-G1 VDD-R1 R1 R1 1 2
1 2 R2D5 MA4 0.1/10
N9 N9 VSS_37 GND P VDD1V_G_20 R18 R18 G3 G3 VDDQ-G3
3 4 82 MA0 C2R8 1005
N11 N11 VSS_38 GND P VDD1V_G_21 T9 T9 O MBANK0 AB24 AB24 G7 G7 VDDQ-G7 VSS-A3 A3 A3 1 2
5 6 ಲ2010 MCAS
N13 N13 VSS_39 GND P VDD1V_G_22 T11 T11 O MBANK1 AA23 AA23 G9 G9 VDDQ-G9 VSS-E3 E3 E3
7 8 MCS 1.0/6.3-X6S
N15 T13 AB23 AB23 A7 J3

4 4
N15 VSS_40 GND P VDD1V_G_23 T13 O MBANK2 A7 VSSQ-A7 VSS-J3 J3 0816
N17 T15 B2 N1 C2R9
N17 VSS_41 GND P VDD1V_G_24 T15 B2 VSSQ-B2 VSS-N1 N1 1 2
N22 N22 VSS_42 GND P VDD1V_G_25 T17 T17 B8 B8 VSSQ-B8 VSS-P9 P9 P9
SHEET_3,4,8,10,14 0.1/10
N24 N24 VSS_43 GND P VDD1V_G_26 U10 U10 D2 D2 VSSQ-D2
+5.4V 1005 MB2
N26 N26 VSS_44 GND P VDD1V_G_27 U12 U12 D8 D8 VSSQ-D8 BA2 L1 L1
P10 P10 VSS_45 GND P VDD1V_G_28 U14 U14 2D2T21 C2T4 E7 E7 VSSQ-E7 NC-A2 A2 A2
C2S1
P12 U16 POW_SUBCPU 0.1/10 F2 E2 1 2
P12 VSS_46 GND P VDD1V_G_29 U16 1 2 F2 VSSQ-F2 NC-E2 E2
P14 U18 1SS355VMTE-17 F8 R3 1.0/6.3-X6S
P14 VSS_47 GND P VDD1V_G_30 U18 R2T7 F8 VSSQ-F8 NC-R3 R3
P16 V9 I2T1 H2 R7 0816
P16 VSS_48 GND P VDD1V_G_31 V9 1 47k 2 SW-Reg H2 VSSQ-H2 NC-R7 R7
P18 V11 +3.3V TPS54232D L2T2 1.82V H8 R8 C2S2
P18 VSS_49 GND P VDD1V_G_32 V11 H8 VSSQ-H8 NC-R8 R8
P23 V13 3.3 0.01/25
P23 VSS_50 GND P VDD1V_G_33 V13 1 2 1 2
R9 V15 1 BOOT PH 8 DDR+1.8V
R9 VSS_51 GND P VDD1V_G_34 V15 L2T1

1
DG6045C 1005

10k-1%
R11 V17 C2H3 600 C2S4 10/6.3

R2T3
R11 VSS_52 GND P VDD1V_G_35 V17 1 2

22/6.3
1 2 VIN GND
100/4 2 7 2 12125

2
WT

C2T7

2125
JUMPER R

2
2125

10/10
C2T9
1

R2X7

2125
2125

12
10/10

1
I201 EN COMP

0
3 6

R2T4
470-1%
GND1

1
PWC970

1
C2T1
L2C9 4 SS VSENSE 5
PWC970 ‫ ޣ‬Power Block2 ‫ ޤ‬8/8

2
2 R2T6 1
1

18k-1%
600

2125

2
22/6.3
C2T8

2125
2125 Fixed 1MHz SW Freq.

10/10
R13 R13 J10 1 2
VSS_53 GND P VDD_C_1 J10

1
C2H4 10/6.3 R2T1 R2T2 C2T5
R15 R15 VSS_54 GND P VDD_C_2 J12 J12 1 21 2 1 2

2
2 12125 C2H5 1.0/10

C2T2
R17 R17 VSS_55 GND P VDD_C_3 J14 J14 33k-1%

RB161VA-20
2
R22 R22 J16 2 1 330p

1
2.7k-1%

D2T1
VSS_56 GND P VDD_C_4 J16

2
2125

8.2k-1%
C2H7
1 0.1/16
2

2200p
2
T10 T10 K9

R2T5
VSS_57 GND P VDD_C_5 K9

C2T3
1 2
C2H8

1
T12 T12 K11 1005 1 0.01/16
2
VSS_58 GND P VDD_C_6 K11

1
T14 T14 K13 1005 C2H9
1 1000p
2 C2T6

1
VSS_59 GND P VDD_C_7 K13 18p-C

3 3
T16 T16 K15 1005
VSS_60 GND P VDD_C_8 K15
T18 T18 L10 C2M1
VSS_61 GND P VDD_C_9 L10 1
2 1
T25 T25 VSS_62 GND P VDD_C_10 L12 L12 100/4
U5 U5 M9 WT GND1
VSS_63 GND P VDD_C_11 M9
U9 U9 M11 L2D1
VSS_64 GND P VDD_C_12 M11
600
U11 U11 VSS_65 GND 1608
U13 U13 2 1
VSS_66 GND P VDD33_G_1 E19 E19 C2U4
U15 U15 C2J7 10/6.3 0.1/10
VSS_67 GND P VDD33_G_2 F20 F20 1 2
U17 U17 VSS_68 GND P VDD33_G_3 H21 H21 2 12125 C2J8 1.0/10
V6 V6 VSS_69 GND P VDD33_G_4 K22 K22 2 1 I2U1
C2K1
1 0.1/16
2 2D2U21 TPS54232D
SW-Reg
V10 V10 VSS_70 GND P VDD33_G_5 K24 K24 L2U2 R2X1
V12 V12 1005 C2K2
1 0.01/16
2 3.3
VSS_71 GND P VDD33_G_6 V5 V5 L2U1 1 2 1 0 2
SHEET_1
V14 V14 1005 C2K3
1 1000p
2 SGM20C1E222-4A 1SS355VMTE-17 1 BOOT PH 8 +1.0VP
VSS_72 GND P VDD33_G_7 W6 W6

1
DG6045C 1.12V 2125

5.6k-1% 10k-1%
V16 V16 1005 2125
AA6 AA6

R2U3
VSS_73 GND P VDD33_G_8

22/6.3
1 3 2 VIN GND 7

BLM31PG601SN1L
2
C2U7
V18 V18 AA18 AA18

2125
VSS_74 GND P VDD33_G_9 2 R2U7

10/10
W21 W21 AB9 AB9

C2U9
1 47k 2

2125

12
10/10
VSS_75 GND P VDD33_G_10

2
1
Y6 Y6 L2D2 3 EN COMP 6
AB19 AB19

R2U4

3216
L2X2
VSS_76 GND P VDD33_G_11 JUMPER R

1
600

2
AA9 AA9 VSS_77 GND 2125

C2U1
AA21 AA21 1 2 4 SS VSENSE 5 POW_SUB
N23 N23 SHEET_4,11

1
2
VSS_78 GND P VDD18_G_1

2 R2U6 1
1

18k-1%
C2K9 10/6.3

2125

2
22/6.3
C2U8
AB10 AB10 VSS_79 GND P VDD18_G_2 N25 N25

2125

2
Fixed 1MHz SW Freq.

10/10
AB18 AB18 2 2125
1 C2L1 1.0/10
P22 P22

R2W1

1005
VSS_80 GND P VDD18_G_3

100
1
2 1 R2U1 C2U5
R2U2
AB25 AB25 VSS_81 GND P VDD18_G_4 R23 R23 DDR+1.8V 1 21 2 1 2

2
C2L3
1 2
0.1/16

C2U2
AC20 AC20 V24 V24

2125

1
VSS_82 GND P VDD18_G_5
820-1% 15k-1% 680p

RB161VA-20
2
AC22 AC22 1005 C2L4
1 2
0.01/16
Y21 Y21

D2U1

1.0/10
VSS_83 GND P VDD18_G_6

2
2125

2
C2W1
39k-1%

5
1005 C2L5
1 1000p
2

2200p
2

2
AE1 AE1 AA20 AA20

C2V4
R2U5
C2V5

470p
1005
VSS_84 GND P VDD18_G_7

C2U3
1 2

Vin

NC-7

NC-6

Cont
1005

2 2

1
AE23 AE23 AB26 AB26

1
VSS_85 GND P VDD18_G_8

10/10
1

1
AF1 AF1 C2U6
AC21 AC21

1
VSS_86 GND P VDD18_G_9 47p-C
AF2 AF2 VSS_87 GND P VDD18_G_10 AD22 AD22
AF26 AF26 AF25 AF25

G1
VSS_88 GND P VDD18_G_11
I2W1
L2D3 1
T23 T23 2 1 MM1663DHBE
VSSDLL_1 GND P VDDDLL_1 T22 T22 SHEET_1,12,14 MAX:1A/1.8W

Vout

NC-2
C2M2 1.0/10 600 1608

GND
AB20 AB20 VSSDLL_2 GND P VDDDLL_2 AB21 AB21 GND1 +3.3A

Cn
2 1 C2M31 0.1/16
2 L2D4
1005 SGM20C1E222-4A
AC10 AC10 AD10 AD10 3 1

4
USB_VSS_1 GND P USB0_VDDA_1 R2X3
C2M4
1 0.1/16
2 2
AD13 AD13 USB_VSS_2 GND P USB0_VDDA_2 AF11 AF11 2125 1 0 2
AE11 AE11 1005 C2M5
1 0.01/16
2 1
USB_VSS_3 GND P USB1_VDDA_1 AE13 AE13 JUMPER R 2125
1005 C2M6
1 1000p
2
AF13 AF13 USB_VSS_4 GND P USB1_VDDA_2 AF14 AF14
1005 GND1 3.3VA
2
L2D5
1 I2V1
AB6 AB6 REFBGVGND GND P REFBGVP3V3 AC6 AC6
C2M8
1 0.1/16
2 600 1608 RP131H201D-T1-F R2XC I2V2
L2D6
AD19 AD19 VSSSADC GND P VDDSADC33 AE19 AE19
1005 2 1
1 0 2
XC6221B182NR-G
4 3 R2XD 1.8V
C2M9 20.1/16

1.0/10
1 600 1608 VDD CE 0 2

10/6.3
4 3 1005 1 90mA

2
C2W2

2125

C2W3

C2W4

470p
1005
AA8 AA8 1005 C2N1
1 0.1/16
2 1 CE VIN 4
DACVSS GND P DACVDD AA7 AA7 2 1005 R2X4
1005 GND

1
R2X5 2 1 0 2
2 L2D7 1 2.0V 2 VSS VOUT 3 A+1.8V
AC14 AC14 AFEPLLVSS GND P AFEPLLVDD AB14 AB14 1 0 2
C2N3 1.0/10 600 1608
5 1 2125

2.2/6.3
VOUT NC SHEET_8

2.2/6.3
5 1

2
2 L2D8 1 2125

C2V2

C2V3
1.0/10
2 1
AF18 AF18 AF19 AF19 2
ARPLLVSS GND P ARPLLVDD C2V1
C2N5 1.0/10 600 1608

1
2 L2D9 1
1

AD14 AD14 AD15 AD15 2 1

GND1
MPLLVSS GND P MPLLVDD

1
C2N7 1.0/10 600 1608
AC13 AC13 2 1 2 L2E1 1
DPLLVSS GND P DPLLVDD AB13 AB13

1 1
C2N9 1.0/10 600 1608
AF16 AF16 2 1 2 L2E2 1
MEPLLVSS GND P MEPLLVDD AE16 AE16 SHEET_1,3,4,5,8,9,10,11,12,13,14,15
C2P2 1.0/10 600 1608
AC15 AC15 2 1 2 L2E3 1 +3.3V
RMIIPLLVSS GND P RMIIPLLVDD AD16 AD16
C2P4 1.0/10 600 1608
2 L2E4 1

PWB assembly MAIN 2

AF17 AF17 PLLIOVSS GND P PLLIOVDD AE17 AE17 2 1
C2P5
1 2 600 1608
1 0.1/16
1005 1
GND1
GND1

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

CONTROL BY POWER_SUB

SHEET_1,2,4,5,8,9,10,11,12,13,14,15 +3.3V

6 CONTROL BY POWER_SUB 6
SHEET_1,4,5,8,9,10,12 +5V

GSENSOR I2X1
1CHTW3.3
SHEET_1 S-24C128CI-J8T1U3

3.3k 1005
PWM_G

3.3k 1005
1 A0 VCC 8

1 R2XA 2

1 R2XB 2
0.01/25
2
RE01

C2X1

1005
100 2 A1 WP 7
1 2 R2X9

1
1005 1 100 2 1CHTWSC

2
3 A2 SCL 6

RE05

1005
R2X8 1005

16.8k-1%2
0

RE07

1005
100
1 2 1CHTWSD

210k-1%1
IE01 4 GND SDA 5

RE11

1005
1
12 11 10 9 1005
12 11 10 9 ADXL337 RE06

1SS355VMTE-17
13.6k-1%2 1005

NC-12

NC-11

NC-10

NC-9
IE02 1CHTWGD

DE01

115k-1%2
13 13 88 1

0.1/16
NC-13 NC-8 NJM12904V

2
RE09

1005
CE05

1005
1
Aout GND1
14 14 77 11 88

1
Vs-14 GND-7 V+ RE12
G1 10k-1%

0.1/16
5 5
I2CDAT

1CE022

1005
15 15 G1 6 22 A-in B_out 1005
Vs-15 GND-6 6 77
RE03 2 1 I2CCLK
1 0 2 A+in B-in

4.7/6.3
16 16 Zout Xout 55 33 66

2
CE01
1005 RE10

RES-1

RES-3

Yout
44 B+in 110k-1%2
55

1
GND

ST
1005

2 1005 1
1 2 3 4

R367
1 2 3 4 RE04

10k
2

4.7/6.3

0.01/25
1 0 2

2
1005

CE03

CE08

1005
16.2k-1%2
0.1/16

1.0/10

1.0/10
RE02 0
R362

1CE042

1
1005

CE06
LAMP

1005

RE08

1005

CE07
R

1
2 1 2 1.0k 1

2 1005 1
1

R368
1005

10k
D302
SML-D12U
R363
GND1 TEMP R LED-LAMP
2 1 2 1.0k 1
LED-TEMP
1005 LED-P-G SHEET_1
D303
SML-D12U LED-P-R
R360
GREEN 680
2 1005 1 STANDBY POWER
44 3 3 STB+3.3V SHEET_4,14
YG
2 1

4 4
22 1 1
R R361
RED
390
D301 1005
FRYPY1211C

R320
0
2 1005 1

DTC114EEBTL

1 R365 2
R306

Q307

1.2k
1005
1005
2 0 1

3
I330
PST8442NR
R301
SHEET_2,19 RESETN 1 OUT CD 5 0
2125
1005
2 1

DTC114EEBTL
2 0 1
2 VDD 4.2V

0.047/16

1
Q302
R302

2
C330

1005

R366

1005
330
3 GND NC 4

1
3 3

2
STANDBY POWER T=0.69*10^6*C
SHEET_3,4,13,15,17,18,19 +5.4V

KEYI-POW SHEET_1,14
JUMPER R KEYI-INP
GND1 KEYI-UP
KEYI-DWN SHEET_1
KEYI-LFT
LC01
KEYI-RGT

2 SIGN00384
1 600 2

1
1005

R303
10k
2125
33 2

R307

1005

R308

1005
1 RC10 2
2
RC18

1005 1005 1005

10k

10k
1005

1005

10/6.3
RC01 100 100 100

1
0.1/16

33

CC01

2125
UP

1
POW INPUT
1005
CC05
1

R316 R315 R314

2
33
1

SHEET_4 LAMP_ON-SP 1 2 1 2 1 2
1 2
SHEET_1 FREQ_SEL
SHEET_1,4 LAMP-S 3 4 S301 S302 S303
5 6 33 32 31 30 29 28 27 26 25 24 23 SKRPABE010 SKRPABE010 SKRPABE010
SHEET_1 LAMP_ON
I/O-33
TDO
I/O-31
GNDIO-30
VCCIO-29
I/O-28
I/O-27
TCK
I/O-25
GNDIO-24
I/O-23

7 ಲ20108 1 2 1 2 1 2
1 2 1 2 1 2

3 4 3 4 3 4
34 I/O-34 I/O-22 22 3 4 3 4 3 4

100p-C

100p-C
CHPL1

100p-C
1

2
C361

1005

1005

1005
35 I/O-35 I/O-21 21

C363

C365
1 RC07 2 1 CHPL2
SHEET_1 PWM_CPLD GNDINT-36 I/O-20

2 2
36 20
CHPL3

1
1005 1
33 37 INPUT/GCLK1 I/O-19 19
1 RC03 2 1 CHPL4
38 INPUT/OE1 I/O-18 18
1 RC04 2 10k
1005 IC01
SHEET_1 DVS 39 INPUT/GCLRn VCCINT-17 17

2
1 RC05 2 33
1005 EPM3032ATC44-10N-C15

1005

R309

1005

R310

1005

R313
10k

10k

10k
SHEET_2,19 VCK 40 INPUT/OE2/GCLK2 GNDINT-16 16 CC04 1005 1005 1005
1005 1 2
SHEET_1,12 DATA-A 33 41 VCCINT-41 I/O-15 15 100 100 100
CC02 RIGHT DOWN LEFT
0.1/16 R317 R318 R319

1
SHEET_1,12 CLK-A 42 I/O-42 I/O-14 14
2 1
0.1/16 1005
SHEET_1 LACH-CPLD 43 I/O-43 I/O-13 13 1 2 1 2 1 2
1005
GNDIO-11

3 4 I/O-44 I/O-12
GNDIO-4

VCCIO-9

44 12
I/O-10

5 6 S304 S305 S306

I/O-2
I/O-3

I/O-5
I/O-6

I/O-8
100p-C 1005

100p-C 1005

100p-C 1005

7 8 SKRPABE010 SKRPABE010 SKRPABE010

TDI

TMS
2

2
CC06

CC07

CC08

1 RC06 2 1 2 1 2 1 2
33ಲ2010 1 2 1 2 1 2
1 2 3 4 5 6 7 8 9 10 11
1

1 RC16 2 3 4 3 4 3 4
3 4 3 4 3 4

100p-C

100p-C

100p-C
1005

1005
33

2
C367

C369
1005

C371

1005
1 RC08 2

1 RC09 2
1005

1005

0.1/16
2
33

33

1005

1
CC03

GND1
1 RC13
TCK CHTCKC
1

1 1 10k 1005
2
GND CHTGDC
TDO CHTDOC 1
1 RC14
+3.3V CHT33C GND1
1 1 10k 1005
2
TMS CHTMSC
1 1 2
1005
TDI CHTDIC
10k
RC15

1 1
GND1

PWB assembly MAIN 3

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

SHEET_6,7,14

SHEET_5
SHEET_1

SHEET_9,10,13

SHEET_1,5,10

SHEET_2,4,11,15
SHEET_2,11

POW_SUB
POWER6
POWER/FAN

POW_SUB

+2.5V
2D8071

POWER7

+15.5V

+5V
I805
1SS355VMTE-17
XC6221B502NR-G R805

6 6
1 100 2 C809
1 2 3.39V

2
I801

R803

1005
0.1/10

100
L812

3
PQ200WNA1ZPH
3.3

VIN

VOUT
15.5V-Panel DG6045C R804

1
1 2 1 0 2

2 2125 1

2 2125 1
3

1
L826 1 BOOT PH 8 +3.3V SHEET_1,2,3,5,8,9,10,11,12,13,14,15

R859

2125

R860

R850
3

1
RP131H251D-T1-F

2 R809 1 2 R808 1
2125

10k-1%
BLM31PG601SN1L I803

0
CE

GND

NC
1 2

22/6.3
5V

22/6.3
2 VIN TPS54232D GND 7

2125
2125
Vadj

C834
C811
Vin

GND
3216

Vc

Vo
630mA SW-Reg

2
3 EN COMP 6

10/10
2

2
C843
I802

C842

470p
1005

2125
R855 1 2 3 4 5

VSS

680-1%
+5.4V

CE

2
10k

1
4 SS VSENSE 5
R864 R865 R866 2 1005 1

22/6.3
C814
1

1
1.0/10
8.2k 8.2k 8.2k

2 R849 1
2125
2

VOUT

18k-1%
C815
ಲ2010 ಲ2010 ಲ2010 Fixed 1MHz SW Freq.

VDD

1.0/16

1
1

100k

R806
1

2200p
1608
C839

2
C810
2
4
6
8

2
4
6
8

2
4
6
8
R825 R810 C813

5
1.0/10

2.2/10
1 21 2 1 2

2
1

5
C825

C826

2125
18.2k-1%2

1
2

RB161VA-20
220p

R856

1005
5.6k-1% 47k-1%

2
1
2

D806
10/10
3

2
5

5
1

2125
C837

2
3.3k-1%
1 2

0.1/25

R807
1
MVK/SKV

1
2.2/10
R862

47/16

2
1
C817

C808

2125
C833

C812

11.5k-1%2
10k

APFS0

APFS1

APFS2

APFS3

APFS4
2 12p-C

R857

1005

1
1 1005 23

1
2
2

1
1

2.2/10
2
1

C835

2125
Q815 FG_SEL0

2.0k-1%
2SC4617EBTL FG_SEL1

1
R858
SHEET_1

1005
FG_SEL2
R863
10k FG_SEL3

1
5 5
FG_SEL4
1 1005 2

2 R853 1
2.2k
Q820
2 DTC114EEBTL

8
6
4
2
2.2k
R852
3

5
3
7

1
1

APFG2
D811 GND1
1

1
3
FAN_FG2 SHEET_1,9
2

2 47k 1
R854
SEL4 SEL3 SEL2 SEL1 SEL0 FAN_FG2
MC2848-T111-1
APP9

0 0 0 0 1 LAMP :I851 D812

0 0 0 1 0 B(INSIDE)PANEL :I971 1
3 GND1
0 0 1 0 0 EXHAUST :I871
1

SHEET_13 FAN+15V 0 1 0 0 0 RG(OUTSIDE)PANEL:I831

MC2848-T111-1
1 2 1 0 0 0 0 BALLAST SYNC
SHEET_15 STB+5V 1D8132
L807
600 1SS355VMTE-17

4 4
SHEET_2,3,8,10,14 +5.4V
1608

L813 E807
1 APP1

600 ZH-03H

RG(OUTSIDE)PANEL
1 APP11

L801 1 1608 2 1 FAN4S

SGM20C1E222-4A L814
1 APP3

1 APP4
1 APP2

E800 2125 1 2 600 2 VCC

FAN -TSB
PHD-20H-D

2
1 3 2125
POW_SUBCPU 2
2 1
2.2/25

1 2 3
2

GND

1
C801

3216

SHEET_10,15 +15V L815 C840

4 3
1

600 470p NC
2125 G1

1
C836
FAN GND 6 5 47/25 G2
L802

2
MVK/SKV
SGM20C1E222-4A I851
8 7 +17V 1 3
I831

APF4S

APF4V

APF4G
PQ200WNA1ZPH PQ200WNA1ZPH

1
2
2125
2.2/25

R842
2

GND RG(OUTSIDE)PANEL FAN LAMP FAN GND1

C802

3216

10 9

FAN-CNT3
L803 0

FAN-CNT4
Vc POWER3

Vc POWER3
1

NFM60R30T222T1 1 1005 2 SHEET_1

12 11 1 3 POWER4
2
3216

Vadj

Vadj
1SS355VMTE-17
+5.75V POWER3

Vin

GND

Vin

GND
14 13

Vo

Vo

APF3G

APF3V
1 APP5

APF3S
E806

2 1005 1
Audio_GND L816

R882
D802

4.7k
1 2 3 4 5 1 2 3 4 5 600 ZH-05H
16 15

1
1 1608 2 1 FAN3S
2.2/10

1
2
1 APP7

APP8

C831

2125
APP6

18 17 R883 L817
A15V 4.7k 1 2 600 2

-NMB
VCC
1

2
2125

10/25
5.1k-1%
1
1

2C8221
1005

3216
20 19

3 3

22.0k-1%1 5.1k-1%
R834

1005
1 2 3

R831 1 R830 2
GND

1
2 1

LAMP FAN
Active

C820
1005

10/25
1.0/25-B

3216
L818 C841

1.0/25-B
0.01/25

2
C838
1

1.0/10
600 470p 4
2

2
1005

2
C821

C829
C803

GND1

1
2125

2.0k-1%
L804

1
R835

1005
1

1005
SGM20C1E222-4A 5

1SS355VMTE-17
1 2 1 2
1
2

SHEET_11 1 3
A_VCC
2 JUMPER R

2
L805 R871
2.2/25

1
2125
2

2
C807

3216

D803

C828

1.0/10
600 3.9k G1
1608 2 R836 1

6.8k-1%
1005 G2

2
2 R832 1
1

1
Q801

2
1.8k-1%

R837

1005
DTA114YEBTL 1.8k-1%
3

1005
1005

6.8k-1%
R833

1005
1
2 GND1
A_GND
SHEET_1

APF1G

APF1V

APF1S
3 L819 E801

1
POWER1
600 ZH-04H

1
1 Q803 1 1608 2 1

-NIDEC
DTC114EEBTL FAN1S
L820
1 2600 2
1

VCC
R886
3.3k
1005

2125
L821

EXHAUST FAN
6001 2 3
STB+3.3V GND
2

1 2 2125
1 2 4
STEPDIM_RXD1 R846
1

0
R872
3.3k
1005

R845
1005
0
2 JUMPER R G1
1005
2

I891 G2
3 I871 PQ200WNA1ZPH
PQ200WNA1ZPH INSIDE(B)PANEL FAN
Q814

2 2
1

FAN-CNT2
EXHAUST FAN

Vc POWER3
DTC114EEBTL

FAN-CNT1
1
C827

Vc POWER2
47/25 GND1

2
2

Vadj
MVK/SKV

Vin

GND
2

R884

1005
4.7k
Vo
GND1

Vadj
G2

APS1

Vin

GND
1
APS2
G2

Vo
S801 1 2 3 4 5

APF2G

APF2V

APF2S
E802
1 R875 2
5.1k-1%

L822

1
1

1005

ZH-03H
G1

R876 1 2 3 4 5 600
ESE11MH2T
G1

B(INSIDE)PANEL
1

1
4.7k 1 1608 2 1
1

LAMP_COVER_SW 2SA1774EBTL FAN2S

2 1005 1 L823
1SS355VMTE-17

FAN -TSB
Q811 1 2600 2
R874 2

2
1 R811 2 2125 VCC

1.0/25-B
3

2.0k-1% 5.1k-1%
2 R839 1 2 R838 1
C824

1
R826

1005
1

2
C823
10k 1005 2
D805

1 100 2 10/25 1 3
R880

1005

1005
100

0
SHEET_1,15 1005 1 GND

2
C818 3216

1
L824

1
1.0/10
2 1
NO-COVER
2

2
C819
10/25 600

7.5k-1%
1 R873 2
2

G1

2
2125

1SS355VMTE-17
100k 3216

R827

1005
G2

1005
1005

1.0/10
JUMPER R

1
SHEET_1 LAMP-S

2
APB+5

D804

C830
1
1.0/25-B

1 2 Q804 GND1
2 R840 1
1

L825

1
C816

2 2SC4617EBTL

2
1 R879 2

R829 6.8k-1%
600 R801 3 1.8k-1%
LAMP_ON SHEET_1 FAN-CNT4
1

(BALLAST) 1 1608 2
2

270-1% 1 10k 1005

1
APBL4

APBL2

APBL1

FAN-CNT3

1.8k-1%

1
E814 1005 1005 SHEET_1

6.8k-1%
1
1 1005 2

2
FAN-CNT2

R828

1005
GH-05H
R802

R885
3.3k
1005

R841

1005
100

1005
2
1 FAN-CNT1
1

0.01/25

2
L808 SHEET_3
1C8042

FLAG/TXD 1 R861 2
1005

1
2

1 2 LAMP_ON-SP
1 2
R851
10k

600 1608 10k

1005

2 R881
GND L809 1 2 R844 1005 0
1 2
0
1

3 600 1608 C832 R843

R877 2 1005 2 1005 1
+5V 0
1 L810 2

1 1
100 1 2 1005 STEPDIM_TXD POWER2
4 600 1 1005 2 3 1
XSCI(P_ON/OFF) 0.01/25 1005 SHEET_1
1 1608 2 1 2
5 1 Q813
STEPDIM/RXD L811 R878
0.01/25

2 DTC114EEBTL
1005
1

600 270-1%
C806
1

1608 1005 3

PWB assembly MAIN 4

G1 APBL5
2

G2 GND1
1 Q812
GND1 DTC114EEBTL
LAMP_POW SHEET_1
GND1
GND1

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 TG POWER&MEMORY PORT 6
+2.5V

I401 I401
CXD3551GG CXD3551GG
L404
CXD3551GG ‫ ޣ‬Power Block ‫ ޤ‬2/4 600 CXD3551GG ‫ ޣ‬Gnd Block ‫ ޤ‬3/4
1608
H10 T18 2 1 H11 U20
H10 VCCK_1 P P VCC3IO2_1 T18 H11 GNDK_1 GND GND GND3IO2_1 U20
I401
K7 K7 VCCK_2 P P VCC3IO2_2 P16 P16 K8 K8 GNDK_2 GND GND GND3IO2_2 N19 N19
C402 1 C432
2 C444 CXD3551GG
L7 L7 VCCK_3 P P VCC3IO2_3 P14 P14 K10 K10 GNDK_3 GND GND GND3IO2_3 N13 N13
1005 0.01/16 2 1
CXD3551GG ‫ ޣ‬Memory Port ‫ ޤ‬4/4
2 1.0/10
1 L13 L13 VCCK_4 P P VCC3IO2_4 N14 N14 100/4 K11 K11 GNDK_4 GND GND GND3IO2_4 M14 M14
C403 C434 2125 WT
M7 M7 VCCK_5 P K13 K13 GNDK_5 GND GND GND3IO2_5 M13 M13

1
10/6.3
2 1 C435 2 10/6.3
1

600
N7 J8 L8 L14 H19 D15

L405

2125

L406

1608
N7 VCCK_6 P P VCC3IO1_1 J8 L8 GNDK_6 GND GND GND3IO2_6 L14 H19 DMDQ0 I/O O DOA0 D15

600
C407 2125
1 2 P7 J7 2 1.0/10
1 L10 M19 C16
P7 VCCK_7 P P VCC3IO1_2 J7 L10 GNDK_7 GND M19 DMDQ1 I/O O DOA1 C16
0.1/16 P8 H7 1 2
C436 L11 H9 H20 C15

2
P8 VCCK_8 P P VCC3IO1_3 H7 L11 GNDK_8 GND GND GND3IO1_1 H9 H20 DMDQ2 I/O O DOA2 C15
1005 C409
1 2 0.1/16
P9 P9 VCCK_9 P P VCC3IO1_4 G7 G7 M8 M8 GNDK_9 GND GND GND3IO1_2 H8 H8 L18 L18 DMDQ3 I/O O DOA3 D14 D14
1 C438
2 1005
0.01/16 P10 P10 VCCK_10 P P VCC3IO1_5 B4 B4 N8 N8 GNDK_10 GND GND GND3IO1_3 B5 B5 M20 M20 DMDQ4 I/O O DOA4 E14 E14
1005 P11 1000p 1005 N9 A3 G18 C14
P11 VCCK_11 P N9 GNDK_11 GND GND GND3IO1_4 A3 G18 DMDQ5 I/O O DOA5 C14
C411
1 2 P12 B7 N10 M18 B14
P12 VCCK_12 P P VCC2IO2_1 B7 N10 GNDK_12 GND M18 DMDQ6 I/O O DOA6 B14
1000p C441
1 2

5 5
P13 P13 VCCK_13 P P VCC2IO2_2 A6 A6 N11 N11 GNDK_13 GND GND GND25A_DLL_RX_1 H4 H4 H18 H18 DMDQ7 I/O O DOA7 A13 A13
1005 0.1/16 1005

TG2.5
P VCC2IO1_1 B11 B11 N12 N12 GNDK_14 GND GND GND25A_DLL_RX_0 M4 M4 B19 B19 DMDQ8 I/O O DOA8 A14 A14
F3 B10 C442 U6 F19 E13
F3 VCC10A_LVDS_RX_1 P P VCC2IO1_2 B10 GND GND25A_DLL_TX_1 U6 F19 DMDQ9 I/O O DOA9 E13
G3 2 1.0/10
1 1 C443
2 1005 K14 K14 U10 C18 C17
G3 VCC10A_LVDS_RX_2 P GND10A_DLL_DDRD GND GND GND25A_DLL_TX_0 U10 C18 DMDQ10 I/O O DOA10 C17
C414 0.01/16
G4 G4 VCC10A_LVDS_RX_3 P P VCC25AD_TX_1 V18 V18 F20 F20 DMDQ11 I/O O DOA11 C13 C13
1.0/10
2 1 H3 H3 VCC10A_LVDS_RX_4 P P VCC25AD_TX_2 V16 V16 E4 E4 GND10A_LVDS_RX_1 GND GND GND25A_LVDS_RX_1 W2 W2 G20 G20 DMDQ12 I/O O DOA12 B13 B13
C415 C445
K4 K4 VCC10A_LVDS_RX_5 P P VCC25AD_TX_3 V10 V10 F4 F4 GND10A_LVDS_RX_2 GND GND GND25A_LVDS_RX_2 W1 W1 B20 B20 DMDQ13 I/O
10/6.3
2 2125
1 L4 V5 2 1
1.0/10 F5 T2 G19
L4 VCC10A_LVDS_RX_6 P P VCC25AD_TX_4 V5 F5 GND10A_LVDS_RX_3 GND GND GND25A_LVDS_RX_3 T2 G19 DMDQ14 I/O O DOBA0 E15 E15
C419
1 2 P4 U13 C448
1 0.1/16
2 G5 T1 A19
P4 VCC10A_LVDS_RX_7 P P VCC25AD_TX_5 U13 G5 GND10A_LVDS_RX_4 GND GND GND25A_LVDS_RX_4 T1 A19 DMDQ15 I/O O DOBA1 D16 D16
0.1/16 1005 P5 U8 1005 K5 R3
P5 VCC10A_LVDS_RX_8 P P VCC25AD_TX_6 U8 K5 GND10A_LVDS_RX_5 GND GND GND25A_LVDS_RX_5 R3 O DOBA2 D12 D12
C421
1 2 1 C450 1005
2
R4 R4 VCC10A_LVDS_RX_9 P P VCC25AD_TX_7 T13 T13 L5 L5 GND10A_LVDS_RX_6 GND GND GND25A_LVDS_RX_6 P2 P2 K20 K20 DMDQS0_N I/O
TG1.0

1000p 0.01/16

TG2.5
R5 R5 VCC10A_LVDS_RX_10 P P VCC25AD_TX_8 T8 T8 T3 T3 GND10A_LVDS_RX_7 GND GND GND25A_LVDS_RX_7 P1 P1 K19 K19 DMDQS0_P I/O O DOCK0_N A16 A16
C422
1 2 1005 C4511 2 T4 N3 D20
T4 GND10A_LVDS_RX_8 GND GND GND25A_LVDS_RX_8 N3 D20 DMDQS1_N I/O O DOCK0_P A17 A17
0.01/16 T11 V3 1000p 1005 T5 K2 D19
T11 VCC10AD_DLL_TX_0 P P VCC25A_LVDS_RX_1 V3 T5 GND10A_LVDS_RX_9 GND GND GND25A_LVDS_RX_9 K2 D19 DMDQS1_P I/O O DOCKE_0 E12 E12
1005 T7 U3 U4 K1
T7 VCC10AD_DLL_TX_1 P P VCC25A_LVDS_RX_2 U3 U4 GND10A_LVDS_RX_10 GND GND GND25A_LVDS_RX_10 K1
J5 M3 C455 G2 D17
J5 VCC10A_DLL_RX_1 P P VCC25A_LVDS_RX_3 M3 GND GND25A_LVDS_RX_11 G2 O DORAS D17
N5 N5 VCC10A_DLL_RX_0 P P VCC25A_LVDS_RX_4 L3 L3 2 1 1.0/10 U11 U11 GND10AD_DLL_TX_0 GND GND GND25A_LVDS_RX_12 G1 G1 O DOCAS F16 F16
K3 C456
1 2 U7 E2 E17
P VCC25A_LVDS_RX_5 K3 U7 GND10AD_DLL_TX_1 GND GND GND25A_LVDS_RX_13 E2 O DOCS_0 E17
L403 J14 J14 J3 0.1/16 1005 G8 E1 F17
600
VCC10A_DLL_DDRD P P VCC25A_LVDS_RX_6 J3 G8 GND10AD_PLL0 GND GND GND25A_LVDS_RX_14 E1 O DOWE F17
C3 1 C459
2 G10 D3 E18
1608 P VCC25A_LVDS_RX_7 C3 G10 GND10AD_PLL1 GND GND GND25A_LVDS_RX_15 D3 O DOODT_0 E18
2 1 G9 G9 B3 0.01/16 A2 R402
VCC10AD_PLL0 P P VCC25A_LVDS_RX_8 B3 1005 GND GND25A_LVDS_RX_16 A2
0 2
G11 G11 M5 U5 A1 1 J16 J16
C428 VCC10AD_PLL1 P P VCC25A_DLL_RX_0 M5 U5 GND10D_TX_1 GND GND GND25A_LVDS_RX_17 A1 DPREF0 I O DADRVDN F18 F18

4 4
1 2 C4601 2
P VCC25A_DLL_RX_1 H5 H5 V4 V4 GND10D_TX_2 GND 1005 H16 H16 DPREF1 I O DADRVUP G17 G17
0.1/16 V8 V8 VCC10D_TX_1 P 1000p V11 V11 GND10D_TX_3 GND GND GND25AD_TX_1 Y20 Y20 I/O DADUMMY K17 K17
BLM31PG601SN1L

1005
1005 V7 V7 VCC10D_TX_2 P P VCC25A_DLL_TX_1 T6 T6 V12 V12 GND10D_TX_4 GND GND GND25AD_TX_2 Y16 Y16
2

V13 V13 VCC10D_TX_3 P P VCC25A_DLL_TX_0 T10 T10 GND GND25AD_TX_3 Y14 Y14
C430
600
3216
L402

1608
L401

1 2 V14 R401 N4 N4 Y11

V14 VCC10D_TX_4 P GND10A_DLL_RX_0 GND GND GND25AD_TX_4 Y11
1000p L19 1 0 2 J4 J4 Y7
P VCC18O_DDR_1 L19 GND10A_DLL_RX_1 GND GND GND25AD_TX_5 Y7
1

1005 P VCC18O_DDR_2 J19 J19 1005 GND GND25AD_TX_6 Y5 Y5

P VCC18O_DDR_3 J18 J18 GND GND25AD_TX_7 Y2 Y2
P VCC18O_DDR_4 J17 J17 GND GND25AD_TX_8 Y1 Y1
P VCC18O_DDR_5 J13 J13 GND GND25AD_TX_9 W20 W20
C401 H17 W16
P VCC18O_DDR_6 H17 GND GND25AD_TX_10 W16
1 2
P VCC18O_DDR_7 H14 H14 GND GND25AD_TX_11 W14 W14
100/4 G14 W11
P VCC18O_DDR_8 G14 GND GND25AD_TX_12 W11
WT G13 W7
P VCC18O_DDR_9 G13 GND GND25AD_TX_13 W7
P VCC18O_DDR_10 G12 G12 GND GND25AD_TX_14 W5 W5
P VCC18O_DDR_11 E19 E19 GND GND25AD_TX_15 V19 V19
P VCC18O_DDR_12 E16 E16 GND GND25AD_TX_16 V17 V17
P VCC18O_DDR_13 C19 C19 GND GND25AD_TX_17 V15 V15
P VCC18O_DDR_14 B18 B18 GND GND25AD_TX_18 V9 V9
P VCC18O_DDR_15 B15 B15 GND GND25AD_TX_19 V6 V6
GND GND25AD_TX_20 T12 T12
GND GND25AD_TX_21 T9 T9

3 3
1 1 GND GND2IO2_1 B8 B8
GND GND2IO2_2 A9 A9
GND1 GND1
GND GND2IO1_1 B12 B12
GND GND2IO1_2 A12 A12

GND GND18O_DDR_1 L20 L20

GND GND18O_DDR_2 L17 L17
GND GND18O_DDR_3 K18 K18
SHEET_1,3,4,8,9,10,12

GND GND18O_DDR_4 K16 K16

GND GND18O_DDR_5 J20 J20
P+3.3V
P+3.3V GND GND18O_DDR_6 H13 H13
SHEET_1,6
GND GND18O_DDR_7 H12 H12
GND GND18O_DDR_8 G16 G16
SHEET_1,3,4,8,9,10,12

GND GND18O_DDR_9 E20 E20

GND GND18O_DDR_10 D18 D18
GND GND18O_DDR_11 D13 D13
GND GND18O_DDR_12 C20 C20
GND GND18O_DDR_13 B17 B17
GND GND18O_DDR_14 B16 B16
GND GND18O_DDR_15 A20 A20
+5V

+5V

GND GND18O_DDR_16 A18 A18

GND GND18O_DDR_17 A15 A15
R411 R421
1 0 2 1 0 2

2 1005 1005
2
0 2

0 2
R410

1005

R420

1005

Q412 Q422
RTQ020N03TR RTQ020N03TR
1

1
1

1
1

6
6

6
6

R412 R422
1 0 2 1 0 2 GND1
+1.0VP +3.3V
2
2

5
5

2
2

5
5

1005 1005
SHEET_1,2,3,4,8,9,10,11,12,13,14,15
3
3

4
4

3
3

4
4
2

2
R414

R424
R413

R423
10k

10k

10k

10k
1

D
1

R425 SSM3J120TU
G
3

2 1 0 2 2 Q423
0.1/10
2

1005
C471

3 3
0.1/10
2
C472
1

2 2
1 1
1

1 1
3 Q411 3 Q421
POWER5 DTC114EEBTL SHEET_1,4,10 POWER6 DTC114EEBTL
1 Q410 1
DTC114EEBTL
Q420
DTC114EEBTL

GND1 GND1

PWB assembly MAIN 5

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

TG/SH R551
I501
CXA3828GL

CXA3828GL ‫ ޣ‬Input Port ‫ ޤ‬1/5

1 0 2
SHT D16 D16 SHT I
1005 C1 C1

+15.5V
ADDR I
R552

P+3.3V
R553 1 33 2 D1 D1
I2CCLKP SCL I
1 33 2 1005
I2CDATP D2 D2 SDA I/O
1005
SH_XCLR E1 E1 XCLR I
VDDMNT E16 E16 VDDMNT I
SH_PS C16 C16 PS I C518
2 1

2125

1608
F2 F2 TESTIN I 100/25

1 L501 2
0 2

0 2

0 2

1
D14 D14 TESTO O WT

R554

1005
R555

1005
R556

1005
5 5

L502
D3 D3 TESTMD I

600 1608
1

600
I401

600
I501

2 L505 1
PANELR E15 E15 PANELR I

2125
GND1

600
CXD3551GG CXA3828GL

L506
PANELG D15 D15 PANELG I
CXD3551GG ‫ ޣ‬Input/Output Port ‫ ޤ‬1/4 PANELB E2 E2 PANELB I CXA3828GL ‫ ޣ‬Power Block ‫ ޤ‬2/5

1
R451
1 75-1%
2
1005 LOCK0_N
LICK0_N R1 R1 LICK0_N I O LOCK0_N Y15 Y15 B11 B11 CK1- I C8 C8 LVDD_1 P P PVCC_1 N15 N15
LOCK0_P C501 1.0/10
LICK0_P R2 R2 LICK0_P I O LOCK0_P W15 W15 A11 A11 CK1+ I C9 C9 LVDD_2 P P PVCC_2 M15 M15
R452
1 75-1%
2 2 1 C502
1 0.1/16
2 K14
P PVCC_3 K14 C519
1005 LORA0_N 1005 1 2
LIRA0_N L1 L1 LIRA0_N I O LORA0_N Y19 Y19 B14 B14 RA- I C10 C10 DVDD_1 P P PVCC_4 J14 J14
LORA0_P C503 10/6.3
LIRA0_P L2 L2 LIRA0_P I O LORA0_P W19 W19 A14 A14 RA+ I C11 C11 DVDD_2 P P PVCC_5 H14 H14 0.1/25
R453
1 75-1%
2 2 12125 C504 1.0/10 C14 G14
C14 DVDD_3 P P PVCC_6 G14 C520
1005 LORB0_N 2 1 C505
1 0.1/16
2 1 2
LIRB0_N M1 M1 LIRB0_N I O LORB0_N Y18 Y18 B13 B13 RB- I C3 C3 DVDD_4 P P PVCC_7 R11 R11
LORB0_P C506
1 2
0.01/16 1005
LIRB0_P M2 M2 LIRB0_P I O LORB0_P W18 W18 A13 A13 RB+ I C6 C6 DVDD_5 P P PVCC_8 P9 P9 0.1/25
R454
1 75-1%
2 1005 C507
1 1000p
2 C7 P8
C7 DVDD_6 P P PVCC_9 P8 C521
1005 LORC0_N 1005 1 2
LIRC0_N N1 N1 LIRC0_N I O LORC0_N Y17 Y17 B12 B12 RC- I P PVCC_10 P7 P7
LORC0_P
LIRC0_P N2 N2 LIRC0_P I O LORC0_P W17 W17 A12 A12 RC+ I E3 E3 VDD_1 P P PVCC_11 R5 R5 0.1/25
R455
1 75-1%
2 C508 1.0/10 E14 E14 P3
VDD_2 P P PVCC_12 P3 C522
1005 LORD0_N 2 1 C509
1 0.1/16
2 1 2
LIRD0_N U1 U1 LIRD0_N I O LORD0_N Y13 Y13 B10 B10 RD- I P PVCC_13 N3 N3
LORD0_P 1005
LIRD0_P U2 U2 LIRD0_P I O LORD0_P W13 W13 A10 A10 RD+ I F3 F3 AVDD_1 P P PVCC_14 M3 M3 0.1/25
R456
1 75-1%
2 C510 10/6.3 F14 L3
F14 AVDD_2 P P PVCC_15 L3

4 4
1005 LORE0_N 2 12125 C511 1.0/10
LIRE0_N V1 V1 LIRE0_N I O LORE0_N Y12 Y12 B9 B9 RE- I T3 T3 AVDD_3 P P PVCC_16 K3 K3
LORE0_P 2 1
LIRE0_P V2 V2 LIRE0_P I O LORE0_P W12 W12 A9 A9 RE+ I R4 R4 AVDD_4 P P PVCC_17 H3 H3
C513
1 0.1/16
2 P13 P13 AVDD_5 P
R457
1 75-1%
2 LOCK1_N 1005 C514
1 2
0.01/16
B5 B5 CK2- I R13 R13 AVDD_6 P P AVCC_1 P15 P15
1005 LOCK1_P 1005 C515
1 1000p
2
LICK1_N F1 F1 LICK1_N I O LOCK1_N Y6 Y6 A5 A5 CK2+ I P AVCC_2 F15 F15
C526
F2 F2 1005 1 2
LICK1_P LICK1_P I O LOCK1_P W6 W6 J3 J3 PGND_1 GND P AVCC_3 H2 H2
R458
1 75-1%
2 LORA1_N
B8 B8 RF- I P6 P6 PGND_2 GND P AVCC_4 P4 P4 0.1/25
1005 LORA1_P
LIRA1_N B1 B1 LIRA1_N I O LORA1_N Y10 Y10 A8 A8 RF+ I P10 P10 PGND_3 GND P AVCC_5 P11 P11
C527
B2 B2 1 2
LIRA1_P LIRA1_P I O LORA1_P W10 W10 L14 L14 PGND_4 GND P AVCC_6 P5 P5
R459
1 75-1%
2 B7 B7 M14 R12
RG- I M14 PGND_5 GND P AVCC_7 R12 0.1/25
1005 LORB1_N
LIRB1_N C1 C1 LIRB1_N I O LORB1_N Y9 Y9 A7 A7 RG+ I P AVCC_8 G3 G3
LORB1_P C528
C2 C2 1 2
LIRB1_P LIRB1_P I O LORB1_P W9 W9 F1 F1 AGND_1 GND
R460
1 75-1%
2 B6 B6 G2 A1
RH- I G2 AGND_2 GND - NC_1 A1 0.1/25
1005 LORC1_N
LIRC1_N D1 D1 LIRC1_N I O LORC1_N Y8 Y8 A6 A6 RH+ I P12 P12 AGND_3 GND - NC_2 B1 B1
LORC1_P C529
D2 D2 1 2
LIRC1_P LIRC1_P I O LORC1_P W8 W8 P14 P14 AGND_4 GND - NC_3 R1 R1
R461
1 75-1%
2 B4 B4 T1
RI- I - NC_4 T1 0.1/25
1005 LORD1_N
LIRD1_N H1 H1 LIRD1_N I O LORD1_N Y4 Y4 A4 A4 RI+ I R14 R14 AVSS GND - NC_5 A2 A2
LORD1_P
LIRD1_P H2 H2 LIRD1_P I O LORD1_P W4 W4 - NC_6 B2 B2
R462
1 75-1%
2 B3 B3 C2 C2 R2
RJ- I DVSS_1 GND - NC_7 R2
1005 LORE1_N
LIRE1_N J1 J1 LIRE1_N I O LORE1_N Y3 Y3 A3 A3 RJ+ I C15 C15 DVSS_2 GND - NC_8 T2 T2
LORE1_P
LIRE1_P J2 J2 LIRE1_P I O LORE1_P W3 W3 - NC_9 C4 C4
- NC_10 C5 C5
R470
1 3.3k-1%
2 P3 P3 3.3k-1%
2 R485
1
U12 U12 C12

3 3
LIRPI0 I I LORPI0 - NC_11 C12
R471
1 3.3k-1%
2 1005 E3 E3 1005 3.3k-1%
2 R486
1
LIRPI1 I I LORPI1 U9 U9 GND GND GND GND - NC_12 C13 C13
GND1

GND1
1005 1005 N14
- NC_13 N14
1 - NC_14 T14 T14
R472 U17 U18 1 2 A15
U17 HSEL I O HST U18 HST GND1 - NC_15 A15
R473 1 33 2 B6 U19 R487 5 6 B15
I2CCLKP B6 SCL I O HCK1 U19 HCK1 - NC_16 B15
1 33 2 1005 C6 T20 22 3 4 R15
I2CDATP C6 SDA I/O O HCK2 T20 HCK2 - NC_17 R15
1005 C7 R19 ಲ2010 7 8 T15
C7 SCL_M I/O O DCK1 R19 DCK1 - NC_18 T15
D7 P20 5 6 C516 1.0/10 R557
1 1.0k-1%
2 G1 G1 A16
D7 SDA_M I/O O DCK2 P20 DCK2 REFO O - NC_19 A16
1 2 T19 R488 3 4 2 1 1005 B16
P+3.3V O DCK3 T19 DCK3 - NC_20 B16
5 6R474 E5 E5 R20 22 1 2 R16
SPI_SEL I O DCK4 R20 DCK4 - NC_21 R16
3 410k D6 D6 ಲ2010 7 8 C517
1 1000p
2 T13 T13 T16
SEN I CALO O - NC_22 T16
7 8ಲ2010 E7 E7 P17 1005
SO I/O O DWN P17 DWN
N17 1 2 1 1
O RGT N17 RGT
7 8 R16 N16 R489 3 4
R16 UIRX0 I O XRGT N16 GND1 GND1
5 6R475 T15 P19 22 5 6
T15 UOTX0 I/O O ENB P19 ENB
3 410k U15 R18 ಲ2010 7 8
U15 UIRX1 I O CLR R18 CLR
R476 1 2ಲ2010 T16 P18
T16 UOTX1 I/O O PCG P18 PCG
1 33 2 1 2
STEPDIM_RXD1 C5 C5 TEST5 I
1005 R477 A5 R490 3 4
A5 TEST2 I/O O VST T17 T17 VST
1 33 2 R478 22 5 6
STEPDIM_TXD1 A4 A4 TEST1 I/O O VCK R17 R17 VCK
R479 1005 1 33 2 ಲ2010 7 8
O SHT V20 V20 SHT
1 33 2
RESETP 1005 C4 C4 XCLR I

2 2
1005 D8 7 8
C481 I/O FOSEN D8 P+3.3V
GND1

1 2 A10 A10 E9 R491 5 6

XTALIN I I/O FOSCL E9
10k 1 2
2 R480 1
1.0M-1%

10p-C I/O FOSDA E10 E10

NX3225GA 1005

1005 A11 A11 D9 ಲ2010 3 4

XTALOUT I/O I FOSO D9
R481
33.000MHZ
4 4
3

1 470 2 1 2
3

A7 A7 E11
X451

TEST3 I I/O GMPORT1 E11 IRIS_SAV

1005 A8 A8 D10 R492 3 4
TEST4 I/O I/O GMPORT2 D10 IRIS_OE
22 7 8
1 1

I/O GMPORT3 C12 C12 IRIS_RST

2

N18 D11 ಲ2010 5 6

C482 N18 TCK I I/O GMPORT4 D11 IRIS_LED
GND1

1 2 M17 C11 1 2
M17 NTRST I I/O GMPORT5 C11 SH_XCLR
10p-C N20 C10 R493 3 4
N20 TDO O I/O GMPORT6 C10 SH_PS
1005 L16 C9 22 5 6
L16 TMS I I/O GMPORT7 C9 VDDMNT
M16 B9 ಲ2010 7 8
M16 TDI I I/O GMPORT8 B9 UART
U16 U16 TEST6 I
R482 U14 U14 TEST7 I I/O TEST8 E8 E8
R483 1 10k 2
I TEST10 C8 C8
1 33 2 R484 1005 D5 D5 EXT_MUTE I
1 33 2
1005 D4 D4 OEFID_IN I O OEFID_OUT E6 E6
1005 T14 T14 TEST9 I
R494
CHFLD
1 1 10k 2
1005

1 1
1

GND1

PWB assembly MAIN 6

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

SH/PANEL

5 5
+15.5V +15.5V +15.5V

2
2

R733
3.3k
R533
3.3k

1005
1005

R633
3.3k
1005

1
1
2SA1774EBTL

2SA1774EBTL

2SA1774EBTL
1
2 2 2
3 3 3
1 Q533 1 Q633 1 Q733
Q531

Q631

Q731
2SC4617EBTL

2SC4617EBTL

2SC4617EBTL
R531 2SC4617EBTL R631 2SC4617EBTL R731 2SC4617EBTL
1 2.2 2 1 2.2 2

1 2.2 2 1 2.2 2

1 2.2 2 1 2.2 2
1 1 1
1 10 2
R535

1 10 2

R635
1 10 2

R735
1005 3 R538 1005 3 R638 1005 3 R738
Q532

Q632

Q732
2 1 0 2 2 1 0 2 2 1 0 2
R532 1005 R632 1005 R732 1005
2 2 2
R536

R636

R736
1 10 2 3 1 10 2 3 1 10 2 3
2SA1774EBTL

2SA1774EBTL

2SA1774EBTL
1005 1 1005 1 1005 1

4 1 1 1
4
Q534

Q634

Q734
C553 C653 C753
1 2 1 2 1 2
3 3 3
1 3.3k 2

1 3.3k 2

1 3.3k 2
10/16 10/16 10/16
2 2 2
R537

1005

R637

1005

R737

1005
MVK/SKV MVK/SKV MVK/SKV

C554 C654 C754

1 2 1 2 1 2
0.1/25 0.1/25 P601 0.1/25 P701
502066-40HLow 502066-40HLow
I501 I501

GND1
R526 R626 I501 R726
CXA3828GL C558 C658 G2 C758 G2
1 10 2 CXA3828GL 1 10 2 CXA3828GL 1 10 2

GND1
P501
54104-40HUp G1 G1
2 1 2 1 2 1
CXA3828GL ‫ ޣ‬R Panel Out ‫ ޤ‬3/5
1005
R510
0.1/25
APR01 1 CXA3828GL ‫ ޣ‬G Panel Out ‫ ޤ‬4/5 R610
1005 0.1/25
APG01 CXA3828GL ‫ ޣ‬B Panel Out ‫ ޤ‬5/5 R710
1005 0.1/25
APB01
1 V.COMR 1 V.COMR 1 V.COMR
1 10 2 APR02 2 1 10 2 APG02 40 1 10 2 APB02 40
O PSIGR_OUT P16 P16 1 PSIG O PSIGG_OUT T4 T4 1 PSIG O PSIGB_OUT H1 H1 1 PSIG
1005 APR03 3 1005 APG03 39 1005 APB03 39
1 VSSG 1 VSSG 1 VSSG
N16 7 8 APR04 4 T5 7 8 R601 APG04 38 J2 7 8 R701 APB04 38
O VSIGR_OUT1 N16 1 VID1 O VSIGG_OUT1 T5 1 VID1 O VSIGB_OUT1 J2 1 VID1
M16 5 6 R501 APR05
1 5
VID2 R6 5 6 0 APG05
1 37 VID2 J1 5 6 0 APB05
1 37 VID2
O VSIGR_OUT2 M16 O VSIGG_OUT2 R6 O VSIGB_OUT2 J1
L15 3 4 0 APR06
1 6 T6 3 4 APG06
1 36 K2 3 4 APB06
1 36
O VSIGR_OUT3 L15 VID3 O VSIGG_OUT3 T6 VID3 O VSIGB_OUT3 K2 VID3
L16 1 2 APR07 7 R7 1 2 APG07 35 K1 1 2 APB07 35
O VSIGR_OUT4 L16 1 VID4 O VSIGG_OUT4 R7 1 VID4 O VSIGB_OUT4 K1 1 VID4
APR08 8 APG08 34 APB08 34
ಲ2010 1 VID5 ಲ2010 1 VID5 ಲ2010 1 VID5
7 8 R502 APR09 9 7 8 R602 APG09 33 7 8 R702 APB09 33
O VSIGR_OUT5 K15 K15 1 VID6 O VSIGG_OUT5 T7 T7 1 VID6 O VSIGB_OUT5 L1 L1 1 VID6
5 6 0 APR10 10 5 6 0 APG10 32 5 6 0 APB10 32
O VSIGR_OUT6 K16 K16 1 VID7 O VSIGG_OUT6 R8 R8 1 VID7 O VSIGB_OUT6 L2 L2 1 VID7
J16 3 4 APR11 11 T8 3 4 APG11 31 M1 3 4 APB11 31
O VSIGR_OUT7 J16 1 VID8 O VSIGG_OUT7 T8 1 VID8 O VSIGB_OUT7 M1 1 VID8
J15 1 2 APR12 12 T9 1 2 APG12 30 M2 1 2 APB12 30
1 1 1

3 3
O VSIGR_OUT8 J15 VID9 O VSIGG_OUT8 T9 VID9 O VSIGB_OUT8 M2 VID9
APR13 13 APG13 APB13
ಲ2010 1 VID10 ಲ2010 1 29 VID10 ಲ2010 1 29 VID10
7 8 R503 APR14 14 7 8 R603 APG14 28 7 8 R703 APB14 28
O VSIGR_OUT9 H16 H16 1 VID11 O VSIGG_OUT9 R9 R9 1 VID11 O VSIGB_OUT9 N1 N1 1 VID11
H15 5 6 0 APR15
1 15
VID12 T10 5 6 0 APG15
1 27 VID12 N2 5 6 0 APB15
1 27 VID12
O VSIGR_OUT10 H15 O VSIGG_OUT10 T10 O VSIGB_OUT10 N2
G16 3 4 APR16 16 R10 3 4 APG16 26 P1 3 4 APB16 26
O VSIGR_OUT11 G16 1 HVDD O VSIGG_OUT11 R10 1 HVDD O VSIGB_OUT11 P1 1 HVDD
G15 1 2 APR17 17 T11 1 2 APG17 25 P2 1 2 APB17 25
O VSIGR_OUT12 G15 1 DCLK2 O VSIGG_OUT12 T11 1 DCLK2 O VSIGB_OUT12 P2 1 DCLK2
APR18 18 APG18 APB18
ಲ2010 1 /DCLK2 ಲ2010 1 24 /DCLK2 ಲ2010 1 24 /DCLK2
APR19 19 APG19 23 APB19 23
O VCOMR_OUT F16 F16 1 /DCLK1 O VCOMG_OUT T12 T12 1 /DCLK1 O VCOMB_OUT R3 R3 1 /DCLK1
R504 7 8
DCK3_R APR20 20 R604 1 2 DCK3_G APG20 22 R7041 2 DCK3_B APB20 22
DCK3 1 DCLK1 DCK3 1 DCLK1 DCK3 1 DCLK1
APR21 21 0 3 APG21 ಲ20103 APB21
DCK4 0 5 6
DCK4_R 1 HCK1 DCK4
4 DCK4_G 1 21 HCK1 DCK4
4 DCK4_B 1 21 HCK1
ಲ20103 4
DCK2_R APR22 22 ಲ2010 5 6
DCK2_G APG22 20 0 5 6 DCK2_B APB22 20
DCK2 1 HCK2 DCK2 1 HCK2 DCK2 1 HCK2
1 2
DCK1_R APR23 23 7 8
DCK1_G APG23 19 7 DCK1_B 8 APB23 19
DCK1 1 HST DCK1 1 HST DCK1 1 HST
7 8 HCK1_R APR24 24 1 2 HCK1_G APG24 18 1 2 HCK1_B APB24 18
HCK1 1 HVSS HCK1 1 HVSS HCK1 1 HVSS
R505 5 6 HCK2_R APR25 25 R605 3 4 HCK2_G APG25 17 R705 3 4 HCK2_B APB25 17
HCK2 1 VSSG HCK2 1 VSSG HCK2 1 VSSG
0 3 4 HST_R APR26 26 0 5 6 HST_G APG26 16 0 5 6 HST_B APB26 16
HST 1 VVSS HST 1 VVSS HST 1 VVSS
ಲ2010 1 2 APR27 27 ಲ2010 7 8 APG27 15 ಲ2010 7 8 APB27 15
ENB 1 ENB ENB 1 ENB ENB 1 ENB
7 8 VCK_R APR28 28 1 2 VCK_G APG28 14 1 2 VCK_B APB28 14
VCK 1 VCK VCK 1 VCK VCK 1 VCK
5 6 R506 VST_R APR29 29 3 4 R606 VST_G APG29 13 3 4 R706 VST_B APB29 13
VST 1 VST VST 1 VST VST 1 VST
3 4 0 APR30 30 5 6 0 APG30 12 5 6 0 APB30 12
DWN 1 DWN DWN 1 DWN DWN 1 DWN
1 2 ಲ2010 R507 APR31 31 7 8 ಲ2010 R607 APG31 11 7 8 ಲ2010 R707 APB31 11
CLR 1 DIN CLR 1 DIN CLR 1 DIN
1 0 2 APR32
1 32 1 0 2 APG32
1 10 1 0 2 APB32
1 10
PCG PCG PCG PCG PCG PCG
1005 APR33 33 1005 APG33 9 1005 APB33 9
1 TEST1 1 TEST1 1 TEST1
R508 APR34 34 R608 APG34 8 R708 APB34 8
1 TEST2 1 TEST2 1 TEST2
0 2SIGN007129 0 2 0 2

2 2
1 APR35 35 1 XSCAN APG35 7 1 SIGN007130 APB35 7
RGT 1 RGT RGT 1 RGT RGT 1 RGT
1005 36 1005 6 1005 6
SOUT SOUT SOUT
APR37 37 APG37 5 APB37 5
1 VVDD 1 VVDD 1 VVDD
APR38 38 APG38 4 APB38 4
1 V.COML 1 V.COML 1 V.COML
R509 APR39 39 PANELG R609 APG39 3 R709 APB39 3
PANELR 1 GCFB 1 GCFB PANELB 1 GCFB
1 0 2 APR40
1 40 1 0 2 APG40
1 2 1 0 2 APB40
1 2
N.C. N.C. N.C.
1005 C555 1005 C655 1 1005 C755 1
G1
2 1
0.1/25 2 1
0.1/25 2 1
0.1/25
G2
C556 C656 C756
1 2 1 2 1 2
10/16 GND1 10/16 10/16
MVK/SKV MVK/SKV MVK/SKV
C551 C651 C751
1 2 1 2 1 2
10/16 10/16 10/16
MVK/SKV MVK/SKV MVK/SKV
C552 C652 C752
1 2 1 2 1 2
0.1/25 0.1/25 0.1/25

GND1 GND1 GND1

1 1

PWB assembly MAIN 7

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 INPUT PORT I2S DAC

6
SHEET_2,3,4,10,14
+5.4V

XC6221B332NR-G

2.2/6.3
4

1
1.0/10

CT12

1608
1
1608
CT11

VIN

VOUT

2
2

3.3V/200mA
IT02

0 2
RT17

1005
PW AFE

VSS
CE

1
1

2
GND1
LT02
47
1 RT18 2 1 2
+3.3V SHEET_10
SHEET_1,2,3,4,5,9,10,11,12,13,14,15 0 2125

5 5
1005 DAC_PLL

2
LT01

2125

CHDA_R
47
IT01

1
UDA1334ATS RT04 SHEET_12

1
CT02
1 RT01 2 1 2 11.0k-1%2
I2SOCLK 1 BCK VOUTR 16 HD_R_IN
0 1.0/16 1005

CHDA_L
CT06
SHEET_1 1 RT02 2 1005
10/6.3
I2SOWS 2 WS VSSA 15
0 2 1 RT05

1
CT01
1 RT03 2 1005 1 2 11.0k-1%2
I2SOD 3 DATAI VOUTL 14 HD_L_IN
0 CT10 CT08 1 2 1005
1.0/16 RT19
1005 0.1/16 0.1/16 SHEET_12
4 VDDD VDDA 13 1 1.0k 2

2
1
CT05 CT07
47/16 1005

1
2
10/6.3 5 VSSD Vref[DAC] 12

0.1/16
2125

2
1

CT09
1 RT11 2 4 5 6 QT04

1100k-1%2
SHEET_10 27CLKOUT 6 SYSCLK/PLL1 SFOR0 11

3300p
2
1
2
1 RT12 2

1005 RT06

1005

CT04

1005
0 IMX9

1 10k 2
1005

1100k-1%2
0

1
RT09

1005
7 SFOR1 PLL0 10

3300p
2
1 RT24 2 1 RT14 2

RT07

CT03

1005
1005 3 2 1
0 0

1
HDMUTE 8 MUTE DEEM/CLKOUT 9
1005

1 0 2
Hi : MUTEL 1 RT13 2

RT15

1005
LV60 Lo : NORMAL D001 RT20
600 MUTE 0 1 1.0k 2
SHEET_1,3,4,5,9,10,12 1 2 1
+5V SHEET_10 HDMUTE Hi : MUTE RT08
3 1 RT16 2 1 RT23 2 1005
2125 Lo : NORMAL 1 47k 2
2 1.0k 1.0k
MUTE

10/6.3
SHEET_1,11 1005

1
1005 1005
CV60

2125
4 4

2
MUTE MC2848-T111-1
2
Hi : NORMAL QT02
JUMPER R Lo : MUTE
RT22 2SA1774EBTL

3
1 4.7k 2

1 10k 2

1 680 2
RV61

1005

RV67

1005
1005 GND1
GND1 RT21
QV61 1 4.7k 2
APVG RV60 RV63 2SC4617EBTL RV68
2 1005
56 1 56 32 1 33 2 GND1
1005 2
1

1 2 1005 1 1005 3
G2 1 QT01
RV47 RV50 RV65 RV66
G1 1 2SC4617EBTL
1 68-1% 2 2 75-1% 1 1 220 2 1 220 2 QV62
1 APVBS
SHEET_10 1 RT10 2
DEEMPH
CVBS
2150-1%1

2 82-1% 1

1005 CV61 2 1 1005 1005 3

2
2SA1774EBTL 1.0k GND1
RV46

RV48

1 22k 2

1 470 2
10 22/6.3 1005

22p-C
2

2
RV62

1005

RV64

1005

CV62

470p
1005
CV63

1005
GND 2125
9 1

1
APSY
SY RV41
8 1 68-1% 2

CHSCV
1 APSC
SC
2150-1%1

2 82-1% 1
RV40

RV42

7 RV55
GND1 75-1%
GND 1 2

1
1 APCR
6 1005
RV44 1 RV53 2 V
Cr/Pr 5 1 1 68-1% 2 1 RV52 2 0 S-Y 1 LV01 2
APCB SHEET_2 A+1.8V
1 RV51 2 1005 S-C I201

1.0/25-B
600
2150-1%1

2 82-1% 1

0
Cb/Pb

2
1
RV43

RV45

1608

CV17
4 APCY 1005 SCV PWC970
0
1005
UDZV6.2B UDZV6.2B

Y PWC970 ‫ ޣ‬Analog Input Port ‫ ޤ‬2/8

1
DV03

UDZV6.2B
1

10p-C

10p-C

47p-C
2

2
DV01

CV51

1005

CV52

1005

CV53

1005

CHCV1

CHSC1

CHSY1
3

3 CV11 0.047/10 1

3
2 1005 A8 A8

1
RIN0 I
2

2 2

1
UDZV6.2B

2 CV12 0.047/10 1 2 1005 A9 A9 GIN0 I

2

2
DV04

DV02

DV00

UDZV6.2B

CV13 0.047/10 1 2 1005 B9 B9 BIN0 I

1CHB1C

1CHG1C

1CHR1C
1 CV21 0.047/10 1 21005
1

502382-10V GND1 CV22 0.047/10 1 21005 C9 C9 RIN1 I P AVDDREFR B12 B12

2
1005 1
0.1/16 CV14
EV01 CV23 0.047/10 1 21005 C10 C10 2
1005 1
0.1/16 CV15
GIN1 I P AVDDREFG B10 B10
A11 A11 2
1005 0.1/16 CV16
1
BIN1 I P AVDDREFB B8 B8

CHCB1

CHCY1

CHCR1
GND1 1005
CV27 0.047/101 2

1
B11 B11 RIN2 I GND1
CV28 0.047/101 2
1005 C11 C11 GIN2 I
CV29 0.047/101 2
1005 A13 A13
1SS355VMTE-17

1SS355VMTE-17

1SS355VMTE-17

BIN2 I
CV30
0.1/161
2
1005 C12
RV36 C12 RIN3 I

CHSOY
DV12

DV13

DV14
2

21
1005 C13
2 75-1% 1 C13 GIN3 I
CV31
1005 0.1/16
1

CHSOY1
1 RV35 2 CHWBC CHSOG1C CHATEST1
CV33 4700p 1005

1
C8 C8 SOGIN0 I I AFE_TEST1 A7 A7 1
0

1
CV34 4700p 1005 1 22 1 A10 CHATEST2
1005 1 RV34 2 A10 SOGIN1 I I AFE_TEST2 B7 B7 1
CV35 4700p 1005 1 2 A12 2
1005 1
0.1/16 CV18
0 A12 SOGIN2 I I AFE_TEST0 D13 D13
RV10 CV36 0.1/16 1005 1 2 B13
1005 1 RV33 2 B13 SOGIN3 I
2 1.0k 1005
1
1SS355VMTE-17

1SS355VMTE-17

0 CHH1C GND1

1
1SS355VMTE-17

RV32 G6
DV09

1005 G6 HS0 I
2 75-1% 1
2

1 100 2
F7
DV10

DV11

F7 HS1 I

1CHV1C

RV11

1005
2 1

2 1005 1
4 3 D7 D7 HS2 I
RV31

RV12
1SS355VMTE-17

RV08 8 7 E7
DV08

2 75-1% 1 E7 HS3 I
B 0.01

680
B 0.01

2 2
B 0.01

C 68p

C 47p

10k
C 68p

6 5
CV44

CV43
2

ಲ2010
CV46

1005

CV45

1005

1005

1005
CV42

CV41
1005

1005
1

RV30 2 1 D6 D6 VS0 I
1

2 75-1% 1 RV09 F6 F6 VS1 I

10k 6 5 E6
ಲ2010 E6 VS2 I

GND1
GND1 GND1 8 7 F5
QV43 QV42 QV41 F5 VS3 I
RT1N144U RT1N144U RT1N144U 4 3
CHCOMP

2 2 2 2 1 A6 A6 XTALIN I
3 3 3 B6 B6 XTALOUT O

1 470 2
RV01

1005
1

1 1 1

RGB_COMP 1 RV02 2
1.0M-1%
1005
GND1 XV01
27MHz
1 1 4 4
2 3
2 3
CHSOG1

NX3225GA

8.0p-C

8.0p-C
CHB1
CHG1
CHR1

2
CV02

1005

CV01

1005
1

1
1
1
1
1

RV23
10 2 GND1 GND1
1 RV22 B
DSUB1_B
1 10 2 RV21 G
DSUB1_G 1005
10 2 R
1005 1

1 1
DSUB1_R
SHEET_10 1005 H
DSUB1_H
RV20 V
DSUB1_V
2 0 1 SOG
DSUB1_SOG
1005
1 10k 2

1 10k 2

1 10k 2

PWB assembly MAIN 8

RV26

1005
RV25

1005
RV24

1005

GND1

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

RS05
1 47k 2 RGB IN

1 10k 2
RS03

1005
1005 RS06
1 47k 2
RS04
1005
0
1 2

6 6

1 100 2
1005

0.1/16
1
CS02

1005

RS02

1005
8

5
JUMPER R

VCC

WP

SCL

SDA
S-24CS02AFT-TB-G

2
1 2
+5V

2 56 1
SHEET_1,3,4,5,9,10,12
LS01

56 1 RS08

1005

IS01
QS01
DTC114EEBTL 600
2 2125
COMPUTER IN 1
AP1DG
RS09

1005
ES01 3

GND
A0

A1

A2
1
3114-15FA
2

HS01 1

4
SC100JT AP1CL

1 47k 2
2125

RS01

1005
1 3 15 G2 5
2 SCL GND
HS02

1SS355VMTE-17

1SS355VMTE-17

1SS355VMTE-17
AP1V 10
SC100JT SYNC

1 100k 2

1 100k 2

1 100k 2
GND1 2125

2
V14 GND

RS16

1005
RS15

1005
RS14

1005

DS04

DS05

DS06
1 3 4
2 VCLK

1
HS03 AP1H 9 HS05
AP1B
SC100JT SC100JT
RS23

1 75-1% 2

1 75-1% 2

1 75-1% 2

1 RS84 2

1 RSD3 2

1 RSD4 2

1 RS83 2
2125 GND1 PLUG 2125 CS06
1

1
0 2 B1

RSC7

RSC8

RSC9

220

220
13 3 1 2 1

220

220
1 3 1 3
2 H B B 2

1 75-1% 2

2
GND 10/6.3 1005
HS04 AP1DA HS06

RS13

RS19
8

1005
33k
AP1G 2125
SC100JT GND1 SC100JT RS22
GND1 2125 2125 CS05
1

1
1 0 2 G1

1
1 3 12 2 1 3 1 2

0.1/16

10/6.3

0.1/16
2
1

1
2 SDA G/Y G/Y 2

CS39

1005
CS38

2125

CS37

1005
1 75-1% 2

1 33k 2
GND 10/6.3 1005
HS07

RS12

RS18

1005
7 AP1R 2125

1
2

2
5 5
SC100JT
GND1 RS21
2125 CS04
1
GND1 11 1 1 3 1 2 1 0 2 R1
R

1SS355VMTE-17
1SS355VMTE-17
2

1SS355VMTE-17
1 75-1% 2
GND R 10/6.3 1005
JUMPER R

RS11

48

47

46

45

44

43

42

41

40

39

38

37
6

1 33k 2
2125

2
2
2
DS01
RS17

1005

DS02

DS03

+VA-48

AGND-47

CH_1-MONITOR_OUTPUT

CH_1-SAG

CH_2-MONITOR_OUTPUT

CH_2-SAG

CH_3-MONITOR_OUTPUT

CH_3-SAG

H-SYNC_MON_OUTPUT

V-SYNC_MON_OUTPUT

+VA-38

AGND-37
G1 GND1
RSC1 R

1
1
1
1 47 2
CH_1-INPUT_A CH_1-BUFFER_OUTPUT-36 DSUB1_R

36
1
GND1 CS36 1005
CH_2-INPUT_A CH_1-BUFFER_OUTPUT-35

35
2
GND1 0.1/16
RS77 RSF5
1 220 2 H1 1 0 2 2 1
CH_3-INPUT_A AGND-34

34
3
RS78 RSF6 1005
1005
1 220 2 V1 1 0 2
H-SYNC-INPUT_A +VA-33

33
4
1005 IS03 RSC2 G
IRIS_PI1
RSF1 THS7327PHP 1 33 2

1 100 2
1 RS26 2

1 RS28 2
V-SYNC-INPUT_A CH_2-BUFFER_OUTPUT-32 DSUB1_G

32
UDZV6.2B

UDZV6.2B

5
47p-C

47p-C
2

1
CS15

1005

CS14

1005

RSH2

1005
1 100 2

1005

1005
2

RSJ2
10k

10k
1005
DS13

DS14

G1

G8

G7
CS35
IRIS_PI1_BUF 1005 1 75-1% 2

2
AGND-6 CH_2-BUFFER_OUTPUT-31 DSUB1_SOG

31
6
0.1/16
1

1 2 1005 Sync-G

G2

G9

G6
RSF2 CH_1-INPUT_B AGND-30 2 1

30
7
1005

Vcc 14

13

12

11

10

8
100

1 10k 2

1 10k 2
APODG

G3

G4

G5
ES02 1005

RSG1

1005

RSG2

1005
6Y

4Y
6A

5A

5Y

4A
GND1 GND1
3114-15FA CH_2-INPUT_B +VA-29

29
8
1
COMPUTER IN 2

RSC3 B SHEET_10

SN74LV14APW
1 47 2

0.1/16
CH_3-INPUT_B CH_3-BUFFER_OUTPUT-28 DSUB1_B

28
9
210051

V-SYNC_BUFFER_OUTPUT
CS51

IS02
1 2

SCHMITT-TRIGGER_ADJ
15 G2 5 1005
GND1

4 4
H-SYNC-INPUT_B CH_3-BUFFER_OUTPUT-27

10

27
SCL GND CS34
HS11 10/6.3

1SS355VMTE-17

1SS355VMTE-17

1SS355VMTE-17
AP2V 10
SC100JT GND1 2125

GND
V-SYNC-INPUT_B AGND-26

11

26
1 100k 2

1 100k 2

1 100k 2
SYNC

2Y

3A
1A

1Y

2A

3Y
1

2125

2
RSD1 H

MUX_SELECT
14 GND
RS43

1005
RS42

1005
RS41

1005

DS07

DS08

DS09
1 3 4
1 75-1% 2

MUX_MODE
1

7
2 AGND-12 H-SYNC_BUFFER_OUTPUT DSUB1_H

12

25
AGND-13

I2C-SDA

I2C-SCL
VCLK

I2C-A1

I2C-A0
1

1
HS09 AP2H 9 HS12 1005
AP2B

DGND
SC100JT SC100JT RSF4

PCU

VDD
CS52
1

2125 GND1 PLUG 2125 1 100 2

1

CS21
1 3 13 3 1 3 1 2 2 1

13

14

15

16

17

18

19

20

21

22

23

24
2 2 1000p RSF3 1005 RSD2 V
1 75-1% 2

B
2

H B 10/6.3
GND 1 100 2 1 75-1% 2
RS40

HS08
RS46

1005

8 DSUB1_V
33k

AP2G 2125 GND1

1 10k 2

1 10k 2
SC100JT 1005 1005

1 100 2

RSG4

1005

RSG3

1005
GND1 GND1 2125
1

CS20

RSH4

1005
1

12 2 1 3 1 2
JUMPER R RSA4

33 2

0.01/25
2

0.1/16

1.0/10
1 75-1% 2

G/Y
1 33k 2

SDA

2
1 10k 2

1
10/6.3

RSA1

1005
1 10k 2

CS31

1005

CS32

1005

CS33
GND G/Y
RS39

HS10
RS45

1005

RSF9
7 AP2R 2125 LS02
SC100JT GND1 1005

1
2

2
600

1
2125 GND1 RSA2
1

CS19 1608
11 1 1 3 1 2
1 100k 2 1 2

1SS355VMTE-17
1SS355VMTE-17
1SS355VMTE-17
R 2 RS49 GND1 +3.3V
1 75-1% 2

GND R 10/6.3
1 0 2 B2 1005
RS38

6 RSB3
1 33k 2

2125 SHEET_1,2,3,4,5,8,10,11,12,13,14,15

2
2
2

1 2

1 10k 2

JUMPER R
DS10
RS44

1005

DS11

DS12

0.1/16

10/6.3
G1

2
210051
1005

CS41

RSA5

1005

CS03

2125
GND1 10k
RS48
1005

1
1
1

1
1 0 2 G2

1 100k 2

1 10k 2

1 10k 2

1 4.7k 2

1 4.7k 2
1005

RSA3

1005

RSA6

1005

RSB4

1005

RSB1

1005

RSB2

1005
RS47
GND1
RS81 1 0 2 R2
GND1 GND1
1 220 2 1005
RS82
1 220 2

3 3

0 2

2
RSA8

1005

RSA9

1005
GND1
UDZV6.2B
UDZV6.2B

0
1 RS85 2

1 RS86 2
2
2

47p-C

47p-C
2

2
DS16
DS15

1005

1005

CS28

1005

CS27

1005
10k

10k

1
RSH3 RSF7
1

0 2 H2 0 2
1
1

1 1
1005 RSF8 1005
V2 1 0 2
1005
GND1

SHEET_1,4
I2C SLAVE ADDR.
FAN_FG2 58h/59h
I2CCLK
FAN_FG2-B
I2CDAT

SHEET_1,3,10,12

2 2
1SS355VMTE-17

1SS355VMTE-17

1SS355VMTE-17
MONITOR OUT

APOR APOG APOB HS13

DS17

DS18

DS19

ES03
502382-7V SC100JT
1

2125
1

1 HS14
R 1 3
2 SC100JT
2125 HS15
G/Y 2 1 3 R Out
2 SC100JT
2125 G Out
B 3 GND1 1 3 B Out
2

GND 4 HS16 GND1

APOH SC100JT
5
2125
HS17 GND1 H Out
1

H 1 3
APOV 2 SC100JT
2125
6 V Out
1

V 1 3
2
1SS355VMTE-17
1SS355VMTE-17
1SS355VMTE-17

GND 7 GND1
UDZV6.2B

UDZV6.2B

GND1
2

2
2

2
DS20

DS21

DS23

DS24
DS22

G1
JUMPER R
1

G2
1

1 GND1
1
GND1

PWB assembly MAIN 9

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

HPD_RST SHEET_1

6 HDMI RG30
1 100 2
HDMUTE SHEET_8
6
RG66
SHEET_1,4,5, RG90
1 0 2 HD_SDAT
POWER6 1 10k 2
HD_BCLK SHEET_1 1005
SHEET_1,3,4,5,8,9,12 RG67 IG11
0 2 QG14
1 IG12 HD_LRCLK
+5V MM1663DHBE 2SC4617EBTL RG92
2
RP131H121D-T1-F 3 1 10k 2

6RG12
8 33
RG69 1

1 10k 2
SHEET_4,15 CG92

2
1 100 2

RG93
4 3
5 4 1 2 VDD CE
POW_SUB Cont Cn 4 3
470p 2
6 3 1.2V GND 2

5
7
1 100 2

1
NC-6 GND
RG68

G1
5 1
VOUT NC GND1 RG91
JUMPER
7 2
NC-7 5 1 SHEET_1
3.3V NC-2 LG01
600
1 0 2
HDMI_RST
8 1 1 2 LG05
Vin Vout
2125 600
1 2

2.2/6.3

1608 1 LG02 2
2
2125

CG93

0.1/16

0.1/16

0.1/16
1 LG07 2
2.2/6.3

2
SHEET_2,3,4,8,14

2125

CG08

CG06

1000p CG04
10/6.3

10/6.3

0.1/16
600

1000p
2

2
CHGHDMCK
CG96

LG03 2125

CG63

CG09 2125

CG61

2125

CG01

CG02

0.1/16
+5.4V

600

2
1

CG03
1.0/10

1
2
2

1
CG91

1000p

1000p
2

1
CG07

CG05
600
1

1
1

1
1
CG62

5 5
10/6.3

1 RG46 2
33 2
GND1 2125

CB0

CB1

CB2

CB3

CB4

CB5

CB6

CB7

CB8

CB9

Y0

Y1

Y2

Y3
1

RG11
2

0
1
CG16 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 CG58
0.1/16 1 2

GPIO3/MUTEOUT

SPDIF

MCLK

RSVDNC-93

RSVDNC-92

RSVDNC-91

SD0

SCK

WS

IOVCC33-87

CVCC12-86

Q0

Q1

Q2

Q3

Q4

Q5

Q6

Q7

Q8

IOVCC33-76

CVCC12-75

Q9

Q10

Q11

Q12

Q13

Q14

Q15

Q16

Q17

ODCK
1 2 0.1/16
RG20
97 AVCC33-97 IOVCC33-64 64
33
1 2 1 2
HDMI_CLK
98 NC-98 CVCC12-63 63
CG15 1 2 RG02
1000p 33 2
CG57 1
99 NC-99 HSYNC 62 HDMI_H
1000p RG03
DG06 33 2
1SS419 1
100 NC-100 VSYNC 61 HDMI_V
RG01
DDC+5V
1 2 1 33 2
101 NC-101 DE 60 HDMI_DE

1 2 Y4 CB0 1 2
DG07 102 NC-102 Q18 59 HDMI_CB0
CB1 3 4RG21
1 47k 2

1 47k 2

1SS419 HDMI_CB1
RG43

RG42

Y5 CB2 5 6 33
103 AVCC12-103 Q19 58 HDMI_CB2
CB3 7 8
Y6 HDMI_CB3
1 2 104 R1XC- Q20 57
CB4 1 2 SHEET_1
Y7 CB5 HDMI_CB4
0

4
4RG22

4
3
RG35 105 R1XC+ Q21 56 HDMI_CB5
CB6 5 6 33
Y8 CB7 HDMI_CB6
7 8
47266-5201 RGA2 106 R1X0- Q22 55 HDMI_CB7
EG01 1 0 2
Y9 CB8 1 2
107 R1X0+ Q23 54 HDMI_CB8
G4

G3

CB9 3 4RG23
Y0 HDMI_CB9
6 33
G4

G3

5
108 R1X1- Q24 53 HDMI_Y0
RG53 Y1 7 8
CG19 HDMI_Y1
1 100 2 0.1/16 CG54
1 2
19

HTPLUG 109 R1X1+ Q25 52

19

RG54 1 2 IG01 Y2 1 2
0 2

1000p
1SS419
1

HDMI_Y2
1 1.0k 2
DG05

RG44

CR0 Y3 3 4RG24
18

+5V 110 R1X2- Q26 51 HDMI_Y3

0.01/25
18

1 2 1CG562 Y4 7 8 33
2
CG84

1005
2

Y5 HDMI_Y4
1

QG01 SiI9127 0.1/16 5 6

0 2

CG18
17

GND 111 R1X2+ IOVCC33-50 50 HDMI_Y5

0.01/25
17

1000p
RG10

1005

2SC4617EBTL
UDZV6.2B

RG55 1 2
2
CG85

2
2

1 RG51 2
DG04

3 1 10k 2 Y6 1 2
16

SDA 112 AVCC33-112 CVCC12-49 49 HDMI_Y6

16

Y7
1

1 CG55 3 4RG25
1 10k 2

47
1

1000p HDMI_Y7
RG56

1 RG52 2 CR1 Y8 5 6 33
2

2
15

SCL 113 R2XC- G1 Q27 48 HDMI_Y8

15

Y9 7 8
47 CG87 HDMI_Y9
CG86 G1 CR2
14

NC 114 R2XC+ Q28 47

14

CR0
1

1 2
EZJZ0V80010 EZJZ0V80010 CR3 CR1 HDMI_CR0
RG71 3 4RG26
13

CEC 115 R2X0- GND1 Q29 46 HDMI_CR1

13

CR2 5 6 33
HDMI_CR2
1 6.8 2 CR4 CR3 7 8
12

RXC- 116 R2X0+ Q30 45 HDMI_CR3

12

RG72
1 6.8 2 I2C SLAVE ADDRESS = 60,68 CR5 CR4 1 2
11

GND 117 R2X1- Q31 44 HDMI_CR4

11

CR5 3 4RG27
CR6 CR6 HDMI_CR5
5 6 33
10

RXC+ 118 R2X1+ Q32 43 HDMI_CR6

10

3 3
RG73 CR7 7 8
HDMI_CR7
1 6.8 2 CR7
119 R2X2- Q33 42
9

RX0- CR8
9

RG74 1 2
HDMI_CR8
1 6.8 2 CR8 CR9 3 4RG28
120 R2X2+ Q34 41
8

GND HDMI_CR9
8

5 6 33
CG20 CR9 8
7
121 AVCC12-121 Q35 40
7

RX0+ 1000p
7

RG75
1 2
1 6.8 2
122 NC-122 GND 39
6

RX1- CG21
6

RG76
1 2
1 6.8 2
123 NC-123 RSVDNC-38 38
5

GND 0.1/16
5

CG13 4.7k
1 2
124 NC-124 RSVDNC-37 37
4

RX1+
4

RG77 2 1
0.1/16 RG99
1 6.8 2
125 NC-125 DSDA2 36
3

RX2- CG14 +5V SHEET_1,3,4,5,8,9,12

3

RG78
1 2
1 6.8 2 DDC+5V
126 NC-126 DSCL2 35
2

GND

RSVDNC-14 /GPIO4

RSVDNC-15 /GPIO5

RSVDNC-16 /GPIO6

RSVDNC-17 /GPIO7
1000p
2

LG09

GPIO0/XCLKOUT
1 600 2

GPIO2/EVNODE
127 AVCC33-127 HPD2 34
1

RX2+ +3.3V
1

2
GPIO1/SCDT
DDC+5V 1608
XRALVCC33

IOVCC33-6

RSVDNC-18

RSVDNC-19

RSVDNC-20
SHEET_1,2,3,4,5,8,9,11,12,13,14,15

RG38
1.0k
CVCC12-7

RSVDNC-8

RSVDL-10
1 1.0k 2

1 4.7k 2

128 EXTRES R2PWR5V 33

APVCC12

XTALOUT

XTALGND

RSVDL-9

R1PWR5V
RG09

RG07

XTALIN

RESET#

SBVCC5
G2

G1

CI2CA

CEC_A

CEC_D

DSCL1

DSDA1
CSCL

CSDA

HPD1
G2

G1

1
RG33 RG32

INT
RGA3
0 2 2 1 QG05 1 22 2 1 22 2
1 2SC4617EBTL 27CLKOUT SHEET_8
CG88 CG11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
2 1 2 RG37
EZJZ0V80010 RG61 3

0 2

0 2
QG06 1 1.0k 2

RG16 4.7k

RG86 4.7k

1 33 2

1 33 2

1 33 2

1 100 2

2
1 10k 2 0.1/16

RG83

1005

RG84

1005
1

2
22

CHGPIO1

CHGPI05

CHGPIO6

CHGPIO7
2SC4617EBTL RG06

RG17

RG04

RG05

RG63

RG87
CHGPI02
2

10k
2 2
3 1 10k 2 CG12

1
RG45

1
QG03 1 2

1
1
0 2

2SK3018
1

1
RG62

1005

GND1 S 1000p
JUMPER

5
1
RG19 IG20
0.1/16

0.1/16

OE-24M

24.576M

27M

VSS
GND1

2
1000p

1000p
2

2
3

RG49 33

33
CG31

CG32

1 4.7k 2

CG46

CG45
1

1000p
2
CG37

0.1/16
XCLKOUT

1 4.7k 2
1000p

G
2

2
CG38

CG39
CY24905
0.1/16

LG06
2
1

1
CG41

RGA1

RG18
1

2 1 600 2
1 100 2

D
1

1
1
RG14

1608

LG08

XOUT
VDD

XIN

PD#
1 600 2

2
RG36
1.0k
1608

4
1 2

1
RG85 RG34 DAC_PLL SHEET_8 HDMI_INT

2
RG57
1 220k 2 0

RG40
560
HDMI_FLD SHEET_1 I2CDAT GND1
RG15 2 1 SHEET_1,2,10,15
1.0M-1% 33 I2CCLK

0.1/16

1
1 2

2
2
CG33
DEEMPH SHEET_8

RG39
1.0k
XG02

1
27MHz

1
27MHz XG01 1 1 4 4
1 1 4 4 NX3225GA 2 3
2 3 2 3
2 3 NX3225GA
6.0p-C

7.0p-C

15p-C
2

2
CG47

CG48

CG40

15p-C
2
CG43
1

1
1 GND1
GND1
1

PWB assembly MAIN 10

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 audio_1 6

5 5

LA12
SGM20C1E222-4A
2125
SHEET_4 A_VCC 1 3
2

GND1 GAIN1 GAIN0 NCDRC1 NCDRC0 CKIN

1 RAJ7 2 1 RAJ8 2
+3.3V
0 0

2
1005 1005

RA41

RA40

RA39

RA38

RA01
47k

47k

47k

47k

47k
CKIN
------------------------

1
H EXT_CLK_Spread
------------------------
L EXT_CLK_NOMAL

2
L_MIX

RA42

RA43

RA44

RA45

RA56
------------------------

47k

47k

47k

47k

47k
4 4

1
R_MIX
SHEET_12 CA34
RA05
Audio L - out 1.0/16
L_OUT_O
L - out 1.0k-1%
2 1 1 2
1005
Audio R - out CA35 R - out
R_OUT_O
2 1 1 RA06 2
1.0/16 1.0k-1%
147k-1%2

1.0/25-B

1.0/25-B
QA07 QA08 1005

2
CA29

CA30
RA08

1005

2SC4617EBTL 2SC4617EBTL
2 2

1
3 3 CA03
147k-1%2

1000p
2
CA12

1005
47/25
RA07

1005

2125
1 1
2

MVK/SKV A_GND

1
RA13
1.0k

1005

RA14
1.0k

1005

LA04

2
CA13
0.22
MPZ2012S101A
1 2

1
1

1
2125
Speaker Monitor

2
LA03
22

32

31

30

29

28

27

26
1 2

PVDDPL

OUTPL-31

OUTPL-30

PVSSL

OUTML-28

OUTML-27

PVDDML
1 RAJ3 2 DG6045C

APSP02
APSP01
SHEET_1,2,3,4,5,8,9,10,11,12,13,14,15 GND1 MONO_P
QA04 0 RA25
2SA1774EBTL 1005 0
PVDDREG GAIN1

25
1 2

1
CA27
1

+3.3V CA02 1.0/6.3 2125

0.1/16 AVDD GAIN0

24
2

1
1
RA18 RAJ5
1005 2 1
3

2 0 1 1 4.7k 2 LA06 EA01

SHEET_1,8 MUTE QA03 1 RAJ2 2 1 2 MPZ2012S101A PH-02H
INLP NCDRC1

23
1005 1005

3
1 4.7k 2

3 3
MUTE 2SA1774EBTL 0 2125
RA49

1005

Hi : NORMAL 1005 IA02 1 2 1

1 RAJ1 2 1 2
1

1
CA16

2125
INLM NCDRC0

22
Lo : MUTE

0.1
4
0 D-510
CA07 CA28 LA07
1005 1 2 2

2
1 2
3

0.1/16 VREF CKIN

G1

21
5
RA19 MPZ2012S101A

1000p
1005

2
GND1 0.1/25

CA18

1005
1 4.7k 2 1 RAJ9 2 MUTE 2125

1000p
SHEET_1,3 RESETN G1

CA17

1005
20
1005 0 INRM CKOUT

2 RA03 1

2
Hi : NOMAL

1
1005 G2
RA26

RAJ0

2125
Hi : NORMAL RA53 Lo : MUTE

1005
47k

0
Lo : MUTE 1 2 0

19
INRP MUTEN 1 2

7
A_GND GND1
390k-1% CHAA08

1
2
+8.5V 1 2125

RA59

2125
SHEET_12

18
RA09 AVSS PROTN

8
2DA011 GND1 LA02

0
2 0 1 A_GND
RA54 RA02 22

OUTPR-11

OUTPR-12

OUTMR-14

OUTMR-15
RA10 1005 1 2 1 2 1 2

17

1
1SS355VMTE-17 PLIMIT SLEEPN

9
APSP03

PVDDPR

PVDDMR
2 0 1 DG6045C
18k-1%

PVSSR
0 APSP04
RA11 1005 CA33

1
2 0 1 2 1 1 2 SLEEP EA02
POWER_A LA10

1
SHEET_1 1005 QA06 Hi : NOMAL PH-02H
RA12 100p-C
1.0/16

11

12

13

14

15

16
2SC5734 MPZ2012S101A

10
10k Lo : SLEEP 1 2 1

2
2
CA11

120k-1%

120k-1%
2

1005

RA51

RA52
2125
1

IA01 1 2 1 2 2
2
3.9k-1%

3
RA35

1005

1
TK11185CSC LA11
LA05

1000p

1000p
2

2
MPZ2012S101A

CA36

CA37
GND1 MPZ2012S101A G1
2

2125
1

1000p
2125

1
CA14

1005

CA15
0.22

2125
1 Vcont Vin 5 G2
QA05
3

1
2SC4617EBTL 2 GND GND1
LA01
RA37 600
1 2

1.0/25-B

1.0/25-B
100 3 Np Vout 4

2
CA31

CA32
A_GND

2 2
0.01/25

2125
1 1005 2 jumper

1
CA09

2 RA46 1

2 RA48 1
1.0/25-B
110k-1%2
4.7/25

1005

1005
3216
2

2
1

47k

47k
10/25
CA26

RA36

1005
2125

1005

CA10
CA08
1

1
2

2 RA20 1
SHEET_1,4 POWER1
4.7k
1005 A_GND
2DA021

1SS355VMTE-17 GND1
2 RA55 1
SHEET_2,4 POW_SUB
4.7k
1005

RA16
1 4.7k 2
SHEET_1 SP_OFF
1005
SP-OFF
Hi : NORMAL
Lo : MUTE

2
4
6
8

ಲ2010
RA57
0
3
5
1

7
1 GND1 A_GND
1

PWB assembly MAIN 11

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

audio_2
6 AUDIO1_L
AUDIO1_R
6
EA12 AUDIO2_L
502382-12V LA80 AUDIO2_R
1 1 APA71 1 600 2
+8.5V 2125
+8.5V AUDIO3_L MONO/MIX AMP to PowerAMP
AUDIO3_R
2 1
GND APA72
LA70
3 1 APA73 1 1.0k 2
MIC_HIGH RAN2
1 APA74 LA71 MIC HIGH CAF6 15k-1%
1 2
4 1 1.0k 2

2.2/10

2.2/10

2.2/10

2.2/10

2.2/10

2.2/10
MIC_LOW 1 1005 2

2
CAG0

2125

CAG1

2125

CAG2

2125

CAG3

2125

CAG4

2125

CAG5

2125
1.0/16 CAA2
LA72 RAF8
5 1 APA75 1 600 21608 47p-C
MIC LOW CAF3

1
1 15k-1% 1
Audio_1-L 2 2

2SC4617EBTL

2SC4617EBTL

2SC4617EBTL

2SC4617EBTL

2SC4617EBTL

2SC4617EBTL
LA73
1 1 1005 2 1005
6 APA76 1 600 21608 1.0/16

2680k-1%1

2680k-1%1

2680k-1%1

2680k-1%1

2680k-1%1

2680k-1%1
Audio_1-R 2 2 2 2 2 2 RAA0 RAN0

RAG1

1005

RAG3

1005

RAG5

1005

RAG7

1005

RAG9

1005

RAH1

1005
QAG0

QAG1

QAG2

QAG3

QAG4

QAG5
LA74 3 3 3 3 3 3 AUDIO R CAA0 51k-1% 120k-1%
1 1 2
7 APA77 1 600 21608 1 1 1 1 1 1

2 4.7k 1

2 4.7k 1

2 4.7k 1

2 4.7k 1

2 4.7k 1

2 4.7k 1
Audio_2-L 1 1005 2 2 1005 1

RAG0

1005

RAG2

1005

RAG4

1005

RAG6

1005

RAG8

1005

RAH0

1005
1.0/16
LA75 RAA1 RAA2
8 1 APA78 1 600 21608
AUDIO L CAA1 51k-1% 33k-1%
Audio_2-R 1 2
LA76
1 1 1005 2 2 1005 1
9 APA79 1 600 21608 1.0/16 RAA6 RAE9
Audio_3-L LA77
470-1% CAF5
1 2 1 0 2
1 MONO_P
10 APA7A 1 600 21608 1 1005 2 1.0/16 1005
Audio_3-R LA78
GND1

5 5
1

1
11 APA7B 1 600 21608

2 1005 1
4

47k-1%
Audio_O-L L_OUT_O

2 1005 1

2 1005 1
7.5k-1%

RAE3
24k-1%

1.0/16

1.0/16
1000p

1000p
LA79

210051

210051
CAF1

CAA9
RAF1

CAF0

RAA9

CAA8

GND

A+in

A-in

Aout
12 1 APA7C 1 600 21608 SHEET_1 CH1_CUT GND1
Audio_O-R R_OUT_O

NJM12904V
SHEET_1 CH2_CUT

1.0/16
1000p
DA60

210051

IA08
CAA7

CAA6
G1 2 1
JUMPER R SHEET_1 CH3_CUT
G2

2
1SS419

2 1005 1

2 1005 1
MIC HIGH

27k-1%

15k-1%

4.7/6.3
RAF0

RAA8

B_out
INPUT MUTE RA66

1
B+in

CAF2
RAF3

B-in
1 0 2

V+
(L:MUTE OFF, H:MUTE ON) 1330k-1%2

2
RA61 1005
1005

8
CA61

1000p
2

8
CA70

1005
1 0 2 1 2 RAF5
RA75 DAA1 1 0 2
GND1 1005

1
1.0/16 RAE1 RAA7 LVL_AUDIO
1100-1%2 0 2 1 1005
RA63 LA60 18.2k-1%2 1SS355VMTE-17
1005 +3.3A
1 RA64 2 2 10k 1 1 600 2 1 1005 2 1005 RAA3 RAC4
AUDIO L CAA3 15k-1% 470k-1% RAN1
0 1005 1608 1 2
1470k-1%2

1
1005

33k-1%

1.0/16
1 1005 2 2 1005 1 +3.3A

0.01/16

1
1005

RAP0
1.0/16

CA63

10/16

1000p
2

2
1
1005

CA69
CA68

2125

1005
CAP1

1005
CAP0 RAF9
RAP2 QAP0 AUDIO R CAF4 CAA5

2
1.0/16 2 1 2 15k-1% 1 2

1
2
1100-1%23 2SC4617EBTL

2
2 1

1
1.0/16 1 1005 2 15p-C
1005 1 RA71

ADR

NC-3

OUTb
SDA

V+
INb

CAPb
1 2 MIC HIGH CAA4 RAA4 1005
1 2 1 2

1
3.9k-1%
GND1

39k-1%
1005

RAP1

1005

RAP3
100-1%
1.0/16 36k-1%
1005

0.1/16
1005

1000p
2

2
CA67

1005
1005
CA66
IA11 MIC LOW CAF7 RAN3
2

2
1 2 1 2

4 4
NJW1109V

1
1.0/16 100k-1%

NC-12
1005

Vref

CAPa

OUTa
INa

GND
SCL
GND1

AUDIO LEVEL DETECTER

10

11

12

13

14
8

1.0/16
10/16
2

2
CA64

2125

CA62
CAN1

1
1.0/16
2 1
RA60 RA69
CA60
QAM0 1 0 2 1 2 GND1 1100-1%2
2
0.047/16

2SC4617EBTL
22k-1%

3 RA65
2

1005 1005
CAN0

1005

1005

RAM0

1.0/16
1 1 0 2
1 RAM1 2
1

1.0k
1005

1005
2

MIC LOW
VOL(MIC)

QAM2
2SA1774EBTL GND1
1

1
33k-1%

+3.3V
0.01/16
1005

RAP4

1
CAP3

1005

CAN3 CAP2 RAP6 QAP1 +3.3V

3

1.0/16 1.0/16 2
2

1100-1%23 2SC4617EBTL
2

RAM4 2 1 2 1
1 4.7k 2 1005 1 RA70
MIC_L/H QAM1 1 2 +5V
1005 2
1

1
3.9k-1%

2SC4617EBTL
39k-1%

3
0.047/16

1
1 4.7k 2

1005

RAP5

1005

RAP7

100-1%
22k-1%

Hi : MIC_HIGH
2
RAM5

1005

CAN2

1005

1005

RAM2

Lo : MIC_LOW 1 1005
1 RAM3 2

3 3
1

1.0k
1005

2 4.7k 1
2

RAC3

RAC2 1005
GND1

2 4.7k 1
GND1

3
3

4
4

1005
QAM3

2
2

5
5
2SA1774EBTL GND1 I2CCLK
I2CDAT_5V
1

I2CDAT

1
1

6
6
RAM6 QA10
3

1 10k 2 SSM6N15FU
1005
I2CCLK_5V
1 1.0k 2

CAF8 RAD4
1 2 1 2
RAM7

1005

1.0/16 39k-1%
2 1005
CAB1 RAB1 CAB5
1 2 1 2 1 2
2
QAM4 1.0/16 39k-1% 22p-C
3 IA12 1005 1005
DTC114EEBTL
RA89 R2A15908SP RA93 RAB3 RAD1
CA89 CAB3
1 1620-1%2 1 2 1100-1%2 1 2 68k-1% 330k-1%
1 INR5 ROUT 28
RA87 1005 1.0/16 RA92 1005 1.0/16 1 1005 2 2 1005 1
CA87
1620-1%2 1 2 1100-1%2
GND1 HD_R_IN 2 INR4 LOUT 27 RAB7 RAB5
1005 RA85 1.0/16 1005
CA85 CA94 1470-1%2 91k-1%
Video Audio R - in 1620-1%2 1 2 2 1
AUDIO3_R 3 INR3 TRER 26 1005 2 1005 1 CAD1
RA83 1005 1.0/16 0.01/25 RA90 1 2
CA83 CA95 R_MIX
RGB Audio R - in2 1620-1%2 1 2 2 1 1005 4.7k-1%
1.0/16
AUDIO2_R 4 INR2 BASSR1 25
RA81

2 1005 1
1005 1 1005 2

1
1.0/16 0.068/16

2 2

47k-1%
CA81 CA96
1620-1%2

RAD3
4

1
RGB Audio R - in1 1 2 2 1

2 1005 1
1005

24k-1%

1.0/16
AUDIO1_R 5 INR1 BASSR2 24

1000p
1

210051
CAB9
RAB9

CAB7

GND

A+in

A-in

Aout
RA80 1005 1.0/16 0.068/16 RA91 GND1
CA80 CA97
RGB Audio L - in1 1620-1%2 1 2 2 1 1005 4.7k-1%

2
AUDIO1_L 6 INL1 BASSL2 23

NJM12904V
1005 RA82 1.0/16 0.068/16 1 1005 2

0.1/16
CA82

1000p
CA98

210051

IA10
CAB8
1620-1%2

CAB6

1005
RGB Audio L - in2 1 2 1005 2 1
AUDIO2_L 7 INL2 BASSL1 22
RA84 1005

2
CA84 1.0/16 CA99 0.068/16
Video Audio L - in 1620-1%2 1 2 2 1

2 1005 1
1005

B_out
27k-1%
AUDIO3_L 8 INL3 TREL 21

RAB8

B+in
RA86

2 1005 1
B-in
1005 1.0/16 0.01/25

47k-1%
CA86

V+
1620-1%2

RAD2
1 2 1005
HD_L_IN 9 INL4 DGND 20
RA88 1005 RA96

8
CA88 1.0/16

8
1620-1%2 1 2 1 0 2
10 INL5 SDA 19 CAD0
1005 1.0/16 RA97 1005 1 2
L_MIX
1 0 2 RAB6 RAB4
11 IGOUTL SCL 18 1.0/16
1005 1470-1%2 91k-1%
CA91
1 2 1005 2 1005 1
12 VOLINL AGND 17
1.0/16 CA77
10/16 RAB2 RAD0
13 IGOUTR REFIN 16 CAB2 68k-1% 330k-1%
1 2
CA76 121252
CA93 0.1/16 1 1005 2 2 1005 1
1 2 1.0/16
14 VOLINR VCC 15
1.0/16 210051 CAB0 RAB0 CAB4
1 2 1 2 1 2
CA75
1000p 1.0/16 39k-1% 22p-C
VOL(AUDIO) GND1 1005 1005
210051
CAF9
1 2 1
RAD5
2 MIXING AMP
1 RA98 2 1.0/16 39k-1%
0 1005 1005
1 RA99 2

1 1
0 1005

SHEET_11 +8.5V
MVK/SKV
10/16
1
CAG9

PWB assembly MAIN 12

2

GND1

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

LAN
1
LL02
600
2
LAN/USB

0.1/16
10/10
2
+3.3V

2
CL10

2125

CL07

1005
2125
1

1
APLF0 CL03
RL07

GND1
1 2 0.1/16
1 2 CL08

GND1
EL03 510-1% 1 2
1005

1 4.7k 2
0821-1X1T-36 1005 RL35
APLF2 10p-C

RL14

1005
1

2 RL48 1
4 4
3

1.0M-1%
ACT_LED 1 220 2

NX3225GA

1 4.7k 2
1515 1005

1005
CL02

3
25MHz

RL16

RL15 1005
XL01
RL34

2 4.7k 1
1005 SHEET_1,14

APUB1
APUB2
APUB3
2 4.7k 1
1 220 2

1005

RL05
ORANGE GREEN 2 1
10/10

1005

RL04
1 4.7k 2
1 1

2
1 RU01 2 EU01

UDZV6.2B
RL06 2125

1005
2
1616 1005

UDZV6.2B
USB1VBUS

2
RL49
21005 1 4.7k 2 UBR23-4K2J00

DL01

DL02
APLF1 RL03 RL08 CL09 0

1
1
1
1

GND1
1 2 1 470 2 G1 G1

3
1510-1%2 0 1005
1313 2
1005

MC2848-T111-1

MC2848-T111-1

1
CL06 12p-C 1005
RL10 1005 2 1005 1
RL11 0
DU03
RL09 0

CU01

2
1005
1

32

31

30

29

28

27

26

25
510-1% 1

3
YELLOW 1005
GND1

5 5
RL30 10/10 MC2848-T111-1

2
1
2 1

DL06
10/10

CKXTAL2

CKXTAL1

AVDD33-30

PWOUT12D

RXER/FXEN

COL/SNI

CRS/RPTR/CRS_DV

LED1/PHYAD1
GND1 SHEET_1

1
TX+C 1 0 2 2125
1

2 1005 1 2125
1414 CL04 RL02 RL01 1 RU04 2 USB D- 2 2
RL31 1 2 USB1DM

2
1

1
1 APLF3 LL28 1005 11.8k-1%2 1680-1%2 6.8

DL04
CL33 1 0 2 RSET LED0/PHYAD0

24
1 2

1
1 11 ACM3225-102 0.1/16
1005 1005 RL26 1005 1 RU05 2 USB D+ 3 3
0.01/16 1005 USB1DP
2 22 1005 1 0 2 6.8
22 33 TX-C PWOUT12A MDIO

23

UDZV6.2B
MIMDIO

2
1005

2
33

APUB4
3 4

2
1005

2
RJ45 RL25 1005 4

DU05
44 11 44
4 1 0 2 CU02
22 33 MDI_P0 MDC

22
CL34 MIMDC

3
5 55 G2

1
0.01/16 RL28 1005 EZJZ0V80010 G2

3
1

1
1 2 11 44

1
MC2846-T111-1

MC2846-T111-1
6 66 0 2

RTL8201E
LL29 1
MDI_N0 PHYRSTB PHY_RST

21
4
1005

IL01
1

2
ACM3225-102

1 4.7k 2
1005 SHEET_1 CU03

G1
DU01

RL18

1005
EZJZ0V80010 MC2846-T111-1

20
MDI_P1 TXEN

5
1 1A 1 APUS1 GND1

G1
RL32
3

2 2A 1 APUS2 RX+C 0 2
USB 1
DL05

DL03

19
MDI_N1 TXD3

6
3 3A 1005 RL33 RLP4
4 4A GND1

USB-B
RX-C 1 0 2 1 0 2

18
AVDD33-7 TXD2 MITXEN

7
1005 RL12 1005 RL22
RJ45-GND USB-GND CL05
1 2 1 4.7k 2 1 0 2

17
G4 G3 G2 G1 G6 G5 RXDV TXD1 MITXD1

DVDD33
G4 G3 G2 G1 G6 G5 0.1/16 1005 1005
1

RXD0

RXD1

RXD2

RXD3

TXD0
APUS3 1005

RXC

TXC
CL01
1 APUS4 10/10

11

12

13

14

15

16
10
RL21

9
2 2125
1 1 0 2
MITXD0
LL01 RL20 1005
2

600 33
2

4 4
1 2 1 2
RL36

2125

MMREFCLK
RL37

2125
0

1005 RL24
0

2125
1 33 2 RL23
1

MIRXD1
1

RL27 1005 1 33 2
MIRXD0
1 33 2 1005
GND1 MICRSDV
1005

GND1 FU30
nanoSMDC050F/13.2
1 2

USB-A
UDZV6.2B
3

RU30
DU15

1 0 2 DU12
MC2848-T111-1 RU11
1
2
1

2125
RU12 2 0 1
USB0DM
2 0 1 1005
USB0DP
2

1005
1

CU11
CU12
EZJZ0V80010 EZJZ0V80010
1

DU10
3

MC2846-T111-1 CL50
RL59
0.1/16
1 0 2
+3.3V
IU20 1005 2 1
1005

3 3
RU07 MIC2005A-1YM6

1 10k 2
IL50
LU21
1 0 2

RL55

1005
1 2 R2051S02-E2
USB_PWR_PL 1 VIN VOUT 6

RL52 2 1005 1
1005

RL51
1.0k
BLM31PG601SN1L 1 NC-1 VCC 16 CL57
1 2
MVK/SKV
100/6.3

2 GND CSLEW 5 3216

CL53
1
CU10

2 1005 1
2 VSB VDD 15 3.0p-C

1.0k

3
2 1 1005
2

3 ENABLE FAULT/ 4 0.1/16

NC-3
RU53

32.768kHz DMX-26S
+3.3V 3 CLKOUT NC-14 14 1005
0 RL53
1 100 2
1 4.7k 2

1 10k 2

1 1.0M 2
SHEET_1.3.9.10.12 I2CCLK 4 SCL OSCIN 13
RU21

1005
RU20

1005

RL57

1005

XL50
2 1 1005
0.1/16

10/10

10/10
2

2
CU20

1005

CU21

2125

CU22

2125

2125
RL54 5 SDA OSCOUT 12
1 2
1

I2CDAT

NC-2
100 6 NC-6 NC-11 11
RL56

A
0.01/25
1005

2
CL55

1005
1 100 2 RL58

2
1 RU22 2 7 VDCC INTR 10 CL58
USB_INT_PL 1 0 2 1 2
1005

1
100 GND1
1005 3.0p-C SHEET_1

0.01/25
1005 8 VSS CIN 9

2
CL56

1005
1005

0.1/16
RTC_INTR

1
CL54

1005
1

2
RU44
1 47k 2 CU46
1 2
USB_PWR
0.1/25
RU45 LU42
1 2 3.3

2
100k
1 BOOT PH 8
DG6045C
1 2
RTC 2
2 RU48 1 2 RU47 1

LU41 5.091V
10k-1%

1 2
IU10 GND1
10/10

FAN+15V VIN TPS54232D GND

10/10

2 7
2125
2125

SHEET_4
CU53
CU51

600
SW-Reg
2

2125 3 EN COMP 6
1.8k-1%
2
1

4 SS VSENSE 5
CU52
1
10/10

2 RU51 1
2125

18k-1%

Fixed 1MHz SW Freq.

2200p
2
CU48

RU50 RU49 CU49

1 21 2 1 2
1

0 2
RSX205L-30

3.3k-1% 68k-1% 220p

2
DU06

RU34

1005
4.7/25

4.7/25
2

2
2125

2125
CU54

CU47

2
2.2k-1%

1 2
RU46
1
1

CU50 USB0VBUS
1 100k 2

12p-C
1.0/10
1

2CU341
RU35

1005

1 1
GND1

PWB assembly MAIN 13

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

Temperature/Filter SENSOR
5 SHEET_1,2 +3.3A

IRIS CIRCUIT 5

1.0/6.3
1
1005

CW01
JUMPER R
APW01

APW02

2
IN_FILTER

EW31 LW01
OUT_SIDE

ZH-02H 600
1

1 1 1608 2 GND1
SENSOR

2
(10K)

1 LW02 2
G1
600
G2
1608
RW44
0

RESETB

CW
GND1 CW
IRIS_CW
3 4 OE
1 2 RESETB
IRIS_OE
5 6
CW57
SHEET_1 7ಲ20108 1 2
IRIS_RST
1 RW08 2

0.1/16
1005

Controlled by POWER7 1005

0

SHEET_4,6,7 +15.5V IRIS_LED

1 10k 2
4 4
IW53
CLK

RW61

1005
1 2 RW97 uPD168110
OUTTEMP SHEET_1 IRIS_CLK
DW00 RW55 1 10k 2
2

1 2 1 MODE RESETB 24
10k-1%

0.1/16

0
2
CW02
RW09

1005

1005

1005 1005 1 RW98 2

AIR SENSOR

RB161VA-20 CLK
2 CLK CW 23
1

IW13 1005
1

10k
EW32 PQ200WNA1ZPH
3 LGND VDD 22
501568-04H
1
IN DUCT

APW03 CW58 CW60

1 LW03 2 1 2 1 2

2
1 GND1 4 C_OSC FIL2 21

LW61
5.0V
(10K)

1608
600
600 330p-C
1 APW04 CW59 0.01/25
2 21251 2 1 2 1005
5 MOB FIL1 20

Vadj

1
Vin

GND
1 APW05 LW04 0.01/25 CW61

Vc

Vo
3 BACK 1 2 600 1005 1 2
6 PGND2 FB1 19
2125 1 2 3 4 5
1000p JUMPER R

1.0/10
1 APW06 LW05

2
CW63
4 600
1 2 7 OUT2B OUT1B 18 1005
1608 RW00

12.7k-1%2
1
1 RW11 2

LW06 SHEET_2,3,4,8,10, 0 2

RW80

1005
+5.4V 1
1005

600 V_M2 V_M1 17

0

G1 8
2125 2125

1.0/10
1
G2

CW32
INTEMP CW62 9 OUT2A OUT1A 16
SHEET_1

2
2

1000p
10k-1%

0.1/16
2

1
CW03

2
RW12

1005

1005

GND1 10 FB2 PGND1 15

2 1.8k-1%

10/6.3
1
1005

2
CW33

2125
1

RW94

1005
RW58
1

GND1 1 10k 2 11 PS MOBSEL 14

1
RW91
OE 1005 1 10k 2
12 OE STOP 13
GND1 1005

3 3

2.0k-1%
2
4
6
8

2
4
6
8

2
4
6
8

RW81

RW59

1005
RW02

RW03

RW04
100

100

QW27 1 560 2

12.7k-1%2
0

DTC114EEBTL

RW82

1005
1005

1
2
3

3
5

5
1

RW85
1 0 2 3
SHEET_1 IRIS_SAV
QW09

2 10k 1
1005
2 CW31

1005

RW95
2SC4617EBTL
GND1 3 1 RW05 2 1 2 1 RW83
HEATER_HIGH QW28 1 560 2
QW08 1 0.1/16
1.8k-1%

1 10k 2
DTC114EEBTL
1005 1005 1005 JUMPER R

RW56

1005
2 2SC4617EBTL QW29
2
3 1 RW062 HEATER_MID DTC114EEBTL
1 3 EW51
1.8k-1% 2
1005 RW41 LW50 ZH-07H
600 APW11
1 0 2 3 1 1 2 1

1
P+3.3V MOTER1B
GND1 GND1 LW51
2125
600 APW12
1 1 2 2

1
MOTER2B
LW52
2125
600 APW13
RW42 1 2 3

1
MOTER2A
1 0 2 LW53
P+3.3V 2125
600 APW14
2 1 4

1
MOTER1A
RW43 LW55
GND1 600
2125
APW16
For IRIS
1 0 2 1 2 5

1
SHEET_1,2,3,4,5,8,9,10,11,12,13,14,15 +3.3V VCC
RW71 LW56
2125
600 APW17
1 220 2 1 2 6

1
PS1
RW60 LW57
1005 1608
600 APW18
1 220 2 1 2 7

2 2

1
SHEET_1 IRIS_PI1_BUF PI1
1005 1608
QW26
G1

1 33k 2
DTC114EEBTL

UDZV6.2B

UDZV6.2B
RW75

1005
2

2
G2

DW21

DW22
3

1
1

GND1
GND1

1 1

PWB assembly MAIN 14

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

6 6

1 10k 2
SUB CPU

RP07
RP03
0 2

1 1005
1

2470p1 1005
2470p
CP13
2
SHEET_12

CP12
3
EN56_SUB QP08
DTA114YEBTL 1
1 QP10
DTC114EEBTL
3

APP10

AP11
2 QP05 2

1
SHEET_12 DTA114YEBTL 1
EP02 3
502386-4H EN38_SUB
PWRC
QP11 3

Reciever
G2 1
LP03 DTC114EEBTL
G1 600 2
1608 RP15
2 1 LP04
REMOTE2
(56.9KHz) 4 600 1 220 2 RP08

FRONT
1608

2
2 1 CP15 1 0 2
VCC 1005
3 470p

1 RP75 2

1 RP06 2
2LP05 1600 RP16

I/R

1005

1005
2.2k
REMOTE1

10k
(38KHz) 2 1608 1 220 2

2
2
2 1

RP04
GND

33k
CP14
1 LP06

1
470p

5 5
600

1
1608

APP13

APP12

100 1
GND1

RP81
1005
GND1

2
SHEET_1,2,3,4,5,8,9,10,11,12,13,14 +3.3V

LP01
1608

600
1
SHEET_4 STB+5V
IP04
XC6221B332NR-G
1 CE VIN 4 LP02
3.3V/200mA 600
2 1
2 VSS VOUT 3
1608

2.2/6.3
1.0/10
1

1
1608
CP04
4 4

CP06

1608
2

2
GND1

SHEET_3,4 STB+3.3V

1
RP62
10k
1005
SHEET_1
2
1SS355VMTE-17

RXD_CTI0
to Main Microprocessor
1
DP01

TXD_CTI0

1
2

RP27
2.2k
1005 to Sub Microprocessor

2
RxD
CP01
0.1/16
21 1005
IP01 GND1 TxD
TC7SZ32FU

APZ01

APZ02

APZ03
APZ04
APZ05
1 IN_B VCC 5
EP01

3 3
2 IN_A ZH-07V I2CCLKM SHEET_1
RP02

1
1
1
Target Cable
1 100 2 X1 1
3 GND OUT_Y 4

for SUB CPU

100 RP56
1005 0
1 RP14 2 X2 2 1 2
EN56_SUB
2.2k1005 1005
/RESET 3
QP02
DTC114EEBTL
2 INTP3 4

3
NO-COVER 5

1
VDD 6

2
1 APZ08 CP02 IP02

RP40

1005
7 1 2

47k
GND 1 APZ09 UPD78F9222MC-5A4-A
0.1/16

1
1005
G1 1 VSS AVREF 20
G2
CONTROL

EP90

2
1APRX 2 P121/X1 P20/ANI0 19
ZH-04V

RP19

1005
10k
GND1
RXD 1 2
1608 LP07
1
GND1 3 P122/X2 P21/ANI1 18
600

1
1APTX RP31 RP26
POW_SUBCPU 100
TXD 2 2
1608 LP08
1 1 2 1 100 2
SHEET_4,10 4 P123 P22/ANI2 17 I2CDATM SHEET_1
1APGD 600 RP12 1005 1005 RP25
100
GND 3 1 10k 2 1 2
SHEET_2,4,11 POW_SUB 5 VDD P23/ANI3 16 EN38_SUB

2 2
APSTB+5
1 1005 RP11 RP09 1005
DP02 0 100
STB+5V 4 2
1608 LP09
1 1 2 1 2 1 2
6 RESET/P34 P130 15 STB-CTL1
600 RP38 1005 RP10
1SS355VMTE-17

10/6.3
1005 SHEET_1

2
33 100

1
2125

CP11
1 2 1 2

RP20

1005
G1 7 P31/TI010/TO00/INTP2
P45 14 STB-CTL2

47k
1005 RP32 RP35 1005

2
G2 15k
1 33 2 1 2

1
(to INPUT PWB) 8 P30/TI000/INTP0
P44/RxD6 13
RP05 1005 1005 RP39
33 2 0
1 1 2
SHEET_1,3 KEYI-POW 9 P40 P43/TxD6/INTP1 12
RP54 1005 RP44 1005
GND1 0 0
1 2 1 2
SHEET_1,4 NO-COVER 10 P41/INTP3 P42/TOH1 11 PWR-RQ SHEET_1

1 RP29 2 1005
1 RP33 2
0.01/25
1005 1005

10k
1CP092

1005

1005
1005

1 RP01 2
2 10k
RP24

33k

2 1005
10k
0.01/25
1CP102

1005

1005
1 RP57 2
10k

1005
10k
RP46
1
GND1

1
GND1 RP59
UARTSEL2㧔㧴㧦㧼㨃‫ޔ‬㧸㧦㧼㧵㧯㧕 0 GND1
1 2

1005

1 1

PWB assembly MAIN 15

A B C D E F G
 CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

MEMO
CONFIDENTIAL
6 6

5 5

4 4

3 3

2 2

1 1

A B C D E F G
CP-X2514WN(C18-25WN) / CP-X3014WN(C18-30WN) / CP-X4014WN(C18-40WN) / CP-WX3014WN(C18-WX30WN)

Basic circuit diagram list

PWB assembly REMOTE PWB assembly MAIN 5
PWB assembly RGB PWB assembly MAIN 6
PWB assembly SENSOR PWB assembly MAIN 7
POWER UNIT BALLAST 1 PWB assembly MAIN 8
POWER UNIT BALLAST 2 PWB assembly MAIN 9
POWER UNIT CIRCUIT PWB assembly MAIN 10
PWB assembly INPUT PWB assembly MAIN 11
PWB assembly MAIN 1 PWB assembly MAIN 12
PWB assembly MAIN 2 PWB assembly MAIN 13
PWB assembly MAIN 3 PWB assembly MAIN 14
PWB assembly MAIN 4 PWB assembly MAIN 15
CP-X2514WN
CP-X3014WN
CP-X4014WN
CP-WX3014WN SM0355