USER' S MANUAL Base n Charging Handset n Last Number Redial

Digital Cordless Telephone Rear and bottom View ! Important Note : Before initial operation, YOU SHOULD FULLY
MENU/R C/
MENU/R C/
1. Press the key in standby mode. Use Redial Book options
CHARGE THE HANDSET for about 15 hours.
MODEL NO. CLT-3602 Result: The LCD displays the last number you
dialed.
Using the redial book options, you can add a
To charge the handset, you should place it on the base or charger. number to phone book or delete a number in
the redial book.
2. Press the key to dial out the number.
Result: When you place the handset on the base or charger, the
1. Press the key.
handset automatically turns on. Your phone allows you to retrieve the last 10
Phone numbers you have dialed and recall them 2. Scroll to the desired number by using the
Charge pins Power Jack
Line Jack quickly. or key.
n Turning Handset On/Off
3. When the number appears on the display,
If the handset is in power off mode, when you If the handset is successful in finding a base, the Search for and dial a number in press the key to choose the desired
MENU/R

place the handset on the base or charger, it handset will enter the standby mode, the display Redial Book option:
automatically turns on. To turn the handset will show handset number or the handset name ADD TO PB: allows you to add the number to the
1. Press the key in standby mode.
Page button on or off in standby mode, follow these steps: (if you have one saved as described on par. HS phone book. Complete storing the entry by starting
Name), signal icon, battery icon and current from step 4 described in par."Adding the Phone
2. If you want to scroll through the memory,
1. To turn on the handset when it's off , press time. If the handset is unsuccessful in finding a Book Entries" (obviously, you will find the number
and hold the key until you switch the press or key repeatedly until you already entered in the appropriate field).
base, the handset will behave according to the
Charger display on. On power up, the handset will find out the number you want to dial. DELETE: allows you to delete the selected number.
Out of Range condition. DELETE ALL: allows you to delete the whole redial
enter subscription mode and search for a
3. Press the key to dial out the number.
n Keys Description registered base. A message as shown
Note:
book.

below will be displayed to the user, and the 4. To exit, press the C/ key.
When battery power is very low, if you Notes:
Dial/Speaker key signal icon will flash. place the handset on the base, the display If no numbers are found, "EMPTY" is
Make/Answer a call. will show as below. YOU SHOULD FULLY Note:
displayed.
Activates the speakerphone if pressed during a call. CHARGE THE HANDSET BEFORE USING. At step 3, when you select DELETE or
When the redial book is full, each time you
searching DELETE ALL options, a message
End/Power key dial a new number, the oldest number stored
"CONFIRM ?" will further ask you to
End a call. in the redial book is automatically erased.
confirm the deletion. To confirm press
----
MENU/R

n Congratulations Long press to activate power on/off, as described in par. Turning Handset 2. To turn off the handset , keep the key
Key, to escape press the C/ key.
Kk
On/Off. pressed until the display disappears.
on purchasing our high quality product.
Navigation key:
Please read the manual carefully to find out all features and how your telephone works, so you can get n CID Book
the best out of your new phone. Up/CID key
Scroll up through lists and menu options.
When you receive a call, if the caller's 4. Press the MENU/R
key, you are prompted to enter
Increase the earpiece/speakerphone volume during a call. Basic Functions information is transmitted from the network on the name.
Enter the CID book, as described in par. CID Book.
n Safety Precautions which the call was made (and the caller doesn't
hide it), the caller's phone number is displayed. 5. Enter the name and press the key, then you MENU/R

Down/Phonebook key All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
To reduce the risk of electrical shock and injury, please follow these basic safety precautions before Moreover, if you missed one or more calls, the can modify the number you want to store.
Scroll down through lists and menu options. standby mode by pressing the key.
using the phone. icon will appear on the LCD. If the CID
Decrease the earpiece/speakerphone volume during a call.
memory is full, the icon will flash on the LCD. 6. Press the key, you are able to select the
MENU/R

1. Carefully read and observe the instructions in this manual. Enter the Phonebook, as described in par. Phone Book.
ring tone from Melody 1 to Melody 10, press
2. Follow all warnings marked on the unit. INT key
n Making a Call OUT OF AREA - This message will display when the key to confirm and exit, you will hear a
MENU/R

someone calls from an area where the telephone confirm beep.

3. When cleaning, unplug the phone first, then use a damp cloth to wipe. Do not use liquid or aerosol Set up an internal call to another handset.
1. Pick up the handset and press the key. You can enter the desired phone number in company is not offering the caller identification
cleaners. Transfer an incoming call to another handset.
standby mode, which allows you to make services or is not yet providing number delivery Delete a number in the CID Book
Set up a conference call with an external line and an internal handset.
4. Do not place objects on the line cord that may cause damage. Result: The icon appears on the LCD. corrections before dialing. Follow these steps: to your area.
1. Press the MENU/R
key.
5. Do not use this phone in wet surroundings or environments where there is a risk of explosion. Redial key
2. Dial a telephone number. 1. Enter a telephone number (up to 32 digits). PRIVATE - If the caller has exercised the option
Enter the redial book, as described in par. Last Number Redial. 2. Press the key again to choose CID BOOK,
MENU/R
6. Avoid spilling of any liquid on the phone. Check it. You can also use the key to to prevent his name and number from being sent,
Insert a pause when pre-dialing a number. and if available, the numbers are displayed.
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only. 3. To end the call, either press the key insert a pause. the message will show on the LCD.

8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with Menu/OK key (left) or replace the handset on the base. 3. Scroll to the number you want to delete by
Note: View and dial any of the CID numbers
polarity symbols (this instruction is found in the installing batteries section.)
MENU/R Enter the menu functions in standby mode. using or key.
Confirm selections & actions. Note: If you make a mistake while entering a
9. Use only the batteries indicated in the User's Manual. Never use other ordinary batteries or 1. Press the MENU/R
key.
Performs "Flash" function. To make a call to the last number you dialed, number, press the C/ key to clear the last 4. When the desired number appears on the
conventional alkaline batteries. Otherwise this may not only cause personal injuries but also damage use the Redial feature. For details, see par. digit. display, press the key. MENU/R
2. Press the key again to choose the CID
MENU/R

to the unit. Cancel/Mute key (right) Last Number Redial. BOOK, and if available, the numbers are
C/ Return to the previous menu. displayed. (You can also access the CID book
10. Do not mix exhausted batteries with full batteries. Exhausted batteries shall not be disposed of with 2. When the number appears correctly, press 5. Use or key to choose DELETE, press
Enter to mute during a call. directly by pressing the key in standby
the usual household waste or in a fire. Delete an incorrect character/digit. the key. the MENU/R
key. The display will show "CONFIRM
mode.)
11. If you are sure you will not be going to use the handset over a month, please take out the batteries ?". Press the MENU/R
key to confirm, you will hear a
from the battery compartment. key n Receiving a Call 3. Use or key to view the numbers, you beep and the LCD shows the next number.
Press and hold to turn on/off keypad lock function. can make a call by a press of the key. You
12. Use only the power supply indicated in the User's Manual.
Set up a conference call, as described in par. Calling with more than one When a new call is received, t he call information Result: After you hang up, the LCD displays can also add the entry to the phonebook. Delete all numbers in the CID Book
13. Keep the phone out of the reach of children. Handset. will appear. the call duration. 1. Press the MENU/R
key.
14. Use the phone only in the described manner. Add CID Number to Phone Book
If the caller can be identified, the caller's phone
n LCD Window Icons Description 2. Press the key again to choose CID BOOK,
MENU/R
15. Stop using the phone if it becomes damaged. Notes:
number is displayed. 1. Press the MENU/R
key. and if available, the numbers are displayed.
You can select the ringer volume by using

n Unpacking or key when the phone rings with 2. Press the key again to choose the CID
MENU/R
1. To answer the call, press the key. If you 3. Press the key and use or
MENU/R
key to
New Call Signal Icon have activated the Auto Answer function, an incoming call. BOOK, and if available, the numbers are choose DELETE ALL menu, then press the
Once you have unpacked your phone, make sure that all the parts shown below are available. If any Indicates you have missed one Indicates whether the current when the handset is on the base, simply lift it displayed. key.
MENU/R
If the polyphonic ring tone is set, the ring
pieces are missing or broken, please promptly call your dealer. or more calls. signal exists or not. If the up to answer. tone may continue for 4 seconds after the
handset is too far from the base, 3. Use or key to view the numbers. When 4. The display shows " CONFIRM ? ", press the
caller's hang-up or after the parallel phone the desired number displays on the LCD, press key to confirm.
MENU/R

Off Hook this icon will blink on the LCD. 2. To end the call, either press the key or
had answered the call. the key to enter ADD TO PB menu.
MENU/R

Indicates the line is engaged. replace the handset on the base.

Result: You hear a beep and the phone
MENU/R C/

Keypad Lock returns to the standby mode after

Hands-free This icon appears when the clearing all the CID numbers.
Indicates the handsfree function keypad is locked. n Muting the Microphone n Key Lock
is enabled.
During a conversation, you can temporarily switch To mute your microphone, press the C/ key
Base Charger 2 Handsets User's manual If you turn on this feature, all keys will be locked. To unlock the keys, keep the key pressed again
your phone's microphone off, so that the other during the conversation. The "CALL MUTED"
Battery Icon You can answer calls by using the key. But till the key lock icon disappears from the display.
party cannot hear you. appears on the LCD.
Indicates battery charge level. when you hang up, the phone returns to the
Warranty card
To unmute the microphone, press the C/ key locked mode. This feature is useful to avoid
Example: You want to say something to another Note:
again. You will restore the normal condition. pressing keys by mistake.
person in the room but do not want In locked mode, if you press any key, the
n Connecting Lines the other party to hear you. To lock the keys, in the standby mode just keep phone will generate a warning tone, and the
4 AAA Ni-MH 2 Adapters* Line cord* Warranty card "HS LOCKED" message will be redisplayed.
the key pressed till the display shows "HS
batteries To AC wall
1. Connect one end of the phone line cord to the phone LOCKED" and the icon.
outlet
line jack of the base, and the other end to a n Adjusting Audio Volume
* The shape of the plugs can vary according to each country’s specification. standard phone wall outlet.
During a conversation, you can use the or You can also select the earpiece volume or the
2. Connect the modular ends of the AC power adapters To phone wall outlet key to adjust the level of the earpiece (or speaker volume by the AUDIO SETUP in Menu n Selecting a Language
n Phone Layout and Keys Function to the power jack of the base and charger, then plug the handsfree speakerphone one, if activated) under HS SETTING , as described in par. HS
The handset supports multiple predefined 3. Use or key to choose the LANGUAGE ,
the AC adapter into standard AC wall outlets. To AC wall
outlet volume from VOL1 to VOL5 . The selected Settings .
languages. You can change the language used then press the key. MENU/R

Handset volume will be displayed on the LCD.

to display the menu messages.
4. The languages will be displayed. Use or
n Installing Batteries 1. Press the MENU/R
key. key to scroll through the options. Each
Earpiece
The rechargeable Ni-MH batteries (AAA size) come with n Ringer Setting 2. Press or key repeatedly to choose HS
language will be displayed in its own native
translation.
your phone. Install the battery before using your SETTING , press the key. MENU/R
You can select your own external (from the 5. Press or key to choose MELODY or
phone. 5. Press the key to select the required
MENU/R
Menu/OK key Display telephone Network) or internal (from other VOLUME , press the key. MENU/R

handsets registered to the same base) ring tone language and you will hear a confirm beep.
Up/CID key 1. Slide the battery cover in the direction of the Result: You can select the ring tone from
MENU/R C/ Cancel/Mute key Speaker
arrow and pull it out.
and adjust the volume.
Melody 1 to 10 or adjust the volume
n HS Name
Left/Int key Right/Redial key
1. Press the MENU/R
key. from Volume 1 to 5, or off. When you
Down 2. Insert new batteries as indicated, matching "HS N" is the default name of the handset after 3. Use or key to choose HS LABEL, then
adjust the ring tone or volume, the registration of handset. The handset number N=
Dial/Speaker key /Phonebook key correct polarity (+,-). Notes: 2. Press or key repeatedly to choose HS press the MENU/R key.
Battery phone plays the selected melody or 1 to 5 reflects the handset is the Nth handset,
End key compartment Reversing the orientation may damage SETTING menu, then press the key. MENU/R

cover sounds the selected loudness. which is registered to the base. The HS Label is 4. You can enter the handset name (up to 6
3. T o r e p l a c e t h e b a t t e r y the handset.
Alphanumeric displayed in the standby mode. You can modify it characters) by using the alphanumeric keys
keys cover, slide the cover up The batteries need to be replaced if 3. Press or key to choose RING SETUP , by the following steps:
6. Press the MENU/R
key to confirm. (use the C/ key to delete the previous
until it snaps in place. they do not recover their full storage and press the key. MENU/R

key character if necessary), then press key to MENU/R

key capacities after recharging. 1. Press the MENU/R
key.
4. Use or key to choose INT RING / EXT confirm and exit. The handset name will be
When replacing the batteries, always
RING , press the key. MENU/R 2. Press or key repeatedly to choose HS modified.
use good quality Ni-MH re-chargeable
SETTING, press the key. MENU/R
Microphone batteries. Never use other batteries or
Charging contacts
conventional alkaline batteries.

Downloaded from www.Manualslib.com manuals search engine

 n Auto Answer Viewing the Phone book Entries 6. Use or key to select the ring you like to Setting Date & Time
Feature List
associate with the number, press the key to MENU/R
1. Date Format 1. Press the MENU/R
key.
1. In the standby mode, press the key.
With this feature, you can answer a call by 3. Use or key to choose AUTO ANSWER , confirm. 1.8GHz DECT technology with GAP Call duration display
just picking up the handset from the base then press the key. MENU/R
2. Press or key repeatedly until the desired 1. Press the MENU/R
key. 2. Press or key repeatedly to choose HS Up to 5 handsets for optional for one base Real time clock (set time)
without pressing any key. name is displayed. Deleting the Phone book Entries SETTING menu, then press the key. MENU/R

2. Press or key repeatedly to choose HS Up to 4 bases for optional for one handset Keypad lock
4. Use or key to choose ON / OFF to Phonebook with up to 50 entries 13 languages selectable
1. Press the MENU/R
key. 1. Press the MENU/R
key. SETTING menu, then press the key. MENU/R

enable/ disable the function, then press the 3. Press the MENU/R
key to show the relevant number. 3. Press or key to choose the SELECT BS,
9 VIP ring tones setting for phonebook Auto answer ON/OFF selectable
2. Press the key to choose PHONE BOOK , press the MENU/R
key.
2. Press or key repeatedly to choose key, you will hear a confirm beep.
MENU/R
3. Press or key to choose DATE & TIME, entries Alarm clock include snooze option
Dialing a Number from Phone book press the MENU/R
key.
HS SETTING , press the key. MENU/R press the key.
MENU/R Redial book with up to 10 entries Handset Name setting
3. Press or key to choose DELETE ENTRY. 4. You can use or key to select the base
10 ring tones and volume selectable (5 LCD and keypad backlight
Find out the number you want to dial. Refer to 4. Press the MENU/R
key to choose DATE FORM. you want, then press the key. If you select
MENU/R
Press the MENU/R key. levels+off)
"Viewing the Phone book Entries". Then press the
n Paging key to dial out the number. 4. Press or key repeatedly until the name 5. You can use or key to choose the Date
a non-existent base, the handset will sound a Key tone ON/OFF selectable Caller ID
warning tone. Full handsfree speakerphone FSK and DTMF dual system Caller ID
you want to delete displays, then press the MENU/R format (DD-MM/MM-DD), press the key to MENU/R

You can page the handset from the base unit To stop paging, press the key on the base again Internal call Caller ID list with up to 40 entries
Editing the Phone book Entries key. The display shows "CONFIRM ?". You can save. 5. The display will show SELECT BS X. Press the Call transfer Incoming calls can be called back/added
making it ring with a special tone. It's useful to or any key on the handset. press the key to delete it or press the C/
MENU/R
key to confirm. A confirm tone will be
MENU/R
3-way conference call to phonebook/deleted
locate a lost handset. 1. Press the MENU/R
key.
key to exit. 2. Setting date & time heard. Receiver/Speaker volume adjustable (5
Note: 2. Press the key to choose PHONE BOOK , levels)
Press the key on the bottom of the base (less On a long key press, more than or equal to press the MENU/R
key. 5. At step 3, if you choose DELETE ALL menu and 1. Press the MENU/R
key. Note:
Mute
than 5 seconds), all the handsets registered to press the key, the display will show
MENU/R HS Reset The caller ID feature is only available if you
5 seconds, the base will enter subscription 3. Press the key to choose CHANGE ENTRY 2. Press or key repeatedly to choose HS PIN protection
the base will ring for about 60 seconds. mode. For details, see par. Registration. "CONFIRM ?". You can press the key to MENU/R
This function allows you to reset the handset subscribe to a Caller Display service from
menu, press the key. MENU/R SETTING menu, then press the key. MENU/R Predialing
delete all the entries or press the C/ key to settings to the factory default. your network provider.
Redial, Flash, Pause
4. Press or key repeatedly until the entry exit. 3. Press or key to choose DATE & TIME, TONE/PULSE dialing mode selectable
n Dial Mode you want to edit displays, press the MENU/R
key to press the key.
MENU/R 1. Press the MENU/R
key. FLASH time selectable
confirm. PB Status
You can select to change the dial mode by the 4. You can press or key to select the 4. Press or key to choose SET DATE or 2. Press or key repeatedly to choose HS
5. If necessary, press the C/ key to clear the The PB Status shows the number of phone book
following steps: required dial mode options (TONE/PULSE) and SET TIME menu, press the key. MENU/R SETTING menu, then press the key. MENU/R

entries already stored. When the PB STATUS

press the key. A confirm beep will be heard.
MENU/R
digit(s) then enter the desired name and
shows on the LCD, press the key to enter it. MENU/R
3. Press or key to choose the HS
Troubleshooting
1. Press the MENU/R
key. number, press the key to save. MENU/R
5. Enter the current date or time by numeric
keypad and press the key to save and exit.
MENU/R DEFAULT menu, press the key. You will be
MENU/R

Note:
2. Press or key repeatedly to choose BS prompted to enter the PIN code.
SETTING, and press the key. MENU/R
If you are not sure which dialing mode should
n BS Settings Note: Symptom Check & Remedy
be selected, please contact your local service 4. Enter the PIN code (the default one is 0000),
At step 5 you need to enter the time in 24-
3. Press the key to choose the DIAL MODE, provider. then press the key. If the PIN code is
MENU/R
Check that the power adapter is properly connected.
Terminate HS 1. Press the MENU/R
key. Hour format. No operation Check that the telephone line cord is properly connected.
then press the key. MENU/R
validated all handset settings will return to the
This function allows you to delete a handset Check that the handset batteries in full power.
2. Press or key repeatedly to choose BS factory default, otherwise a warning tone will Check that the handset batteries are installed properly.
registration from the base. Selecting a Base
n Handsfree SETTING menu, then press the key. MENU/R
be heard and the settings will remain.
This function allows you to select a base from No dial tone Check that the telephone line cord is properly connected.
1. Press the MENU/R
key. 3. Use or key to choose MODIFY PIN Check that the power adapter is properly connected.
those already registered to the handset. You can Result: After resetting, the handset will return to
During a call, you may turn on the To turn the feature off, and keep on talking in
menu, press the key. MENU/R
standby mode.
speakerphone built in the handset. In this normal mode, press the key again. The 2. Press or key repeatedly to choose BS access the options by scrolling the menu. Check that the handset batteries are installed properly.
Nothing appears
mode you can simply put your handset on a icon will disappear. SETTING menu, then press the key. MENU/R
on the display Check that the handset batteries in full power.
4. The display shows "PIN?" to prompt you to
Check that the handset is on.
surface (e.g. a desk) and enjoy the comfort
3. Press the key again to choose TERMINATE
MENU/R
enter the old PIN. Enter it then press key. MENU/R
n Registration
of the handsfree conversation. Notes: If the old PIN code is correct, you will be Handset seems Check the charge contacts.
HS. The display shows "PIN?" to prompt you
Before putting the handset near your ears, be prompted to enter a new PIN code, otherwise to have very short Consistently short battery life may indicate that replacement of the batteries is necessary.
to enter the PIN Code (The default PIN Code is The supplied handsets are already registered with 4. If the base is found, you will be prompted to
To turn the feature on , press the key a warning beep will sound and the handset will battery life Make sure the right batteries be used.
sure you have turned the speakerphone off. "0000"). Then press the key. MENU/R the number 1 and 2. You can register up to 5 enter the PIN code (the default one is 0000).
during a call (line engaged). The icon return to MODIFY PIN menu.
To adjust the speakerphone volume, see par. handsets to the same base in order to share the Enter it then press the key. If the PIN code
MENU/R
Caller ’ s number Make sure you have subscribed to a Caller ID service via your network provider.
appears on the LCD.
Adjusting Audio Volume. 4. Use the or key to select a handset. If same line with other people. is correct, the Registration tone will sound and The caller may have withheld their details.
5. Enter the new PIN, press the key. You will MENU/R is not displayed
you select the current handset or a non- Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.
be requested to confirm the PIN code. Enter then the base assigns a number to the handset,
existent handset, a warning tone will be heard. Before registering a handset to the base, you otherwise a warning tone will sound, and then
n Flash Signal the new PIN again then press the key to MENU/R
should press and hold the key on the bottom
the handset returns to the previous
5. Press the key to confirm, and the selected
MENU/R confirm and exit.
of the base for about 5 seconds then release it.
When the line is engaged, pressing the key MENU/R
To use the said special services, just press the MENU/R
handset will behave according to the registration state.
sends the Flash signal. This key is used in key while the line is engaged: the display will show unregistered condition. BS Reset 1. Press the MENU/R
key. Technical Specifications
5. If the base is not found, the handset will
conjunction with special services (e.g. call R. This function allows you to reset the Base
2. Press or key repeatedly to choose behave according to the Out of Range
waiting) which can be available in your phone Flash Time setting to the factory default.
REGISTER , then press the key. MENU/R condition.
network. For further details please contact your You can select to change the Flash time by the
1. Press the MENU/R
key. Frequency Range 1.88~1.90GHz
network telephone company. following steps: 3. Use or key to scroll through the Base
Channels 120 Duplex channels
2. Press or key repeatedly to choose BS names list, press the key to choose a base
MENU/R

1. Press the MENU/R

key.
SETTING menu, then press the key. MENU/R
to your necessary. The handset will search for Carrier Power <250mW
2. Press or key repeatedly to choose BS the requested base and the relevant
Advanced Functions SETTING menu, then press the key. MENU/R
3. Press or key to choose BS DEFAULT,
information will flash on the LCD.
Modulation GFSK
press the key. You will be prompted to
MENU/R
Frequency Stability < 50 KHz
n Menu Map 3. Use or key to choose the FLASH TIME enter the PIN code.
menu. Press the key. MENU/R n Calling with more than one Handset Charging time 15 hours
1. CID BOOK 4. HS SETTING 4. Enter the PIN code (the default PIN is 0000),
Ambient temperature Normal: 15 ~ 35 , Extreme: 0 ~ 40
ALARM 4. The display shows the current setting. Use the then press the key. If the PIN code is
MENU/R
If you have more than one handset registered to 1. During an external call, press the key then
2. PHONE BOOK AUDIO SETUP or key to select SHORT/LONG, press correct all base settings will be returned to the same base, you can make internal calls and enter the number of the handset you want to Humidity 0%~90%
ADD ENTRY RING SETUP the factory default, otherwise the settings transfer the call to.
the MENU/R key. transfer an external call between the registered Dimensions (mm) Base: 132.1 x 132.1 x 68.5; Handset: 159.3 x 48.4 x 28.9
CHANGE ENTRY TONE S ETUP
will remain. handsets.
DELETE ENTRY LANGUAGE 2. If the called party can answer your call, he/she Power Supply
Modify PIN Base input: 7.5V, 300mA; Handset input: Ni-MH 1.2V x 2, 600mAh
DELETE ALL HS LABEL can press the key to talk with you. At this
Result: After resetting, the handset will return
PB STATUS AUTO ANSWER This function allows you to change the PIN Making an internal call time you can inform him/her of the incoming
DATE & TIME to standby mode.
3. BS SETTING SELECT BS
number of the currently active Base. The default
PIN is 0000.
1. Press the key, the LCD displays as follows,
call.
? Design and specifications are subject to change without notice.
TERMINATE HS HS DEFAULT then enter the number of the handset you 3. When the called handset answers, press the
DIAL MODE want to call. key or replace the handset to the base to
FLASH TIME 5. REGISTER complete the transfer.
MODIFY PIN n HS Settings 1 2 3 4 5 If you subscribe to a DSL service
BS DEFAULT Setting up a 3-way conference call
Setting Alarm 2. Press or key repeatedly to choose HS 2. If the handset entered is valid, the called Please attach a noise filter (contact your DSL provider) to the telephone line between the
When you have both an external call and an
handset will ring and display HSX CALLING.
n Phone Book You are able to set the alarm on the handset
SETTING menu, then press the key. MENU/R

The handset user can press the key to

intercom call in progress, you can set up a three- base unit and the telephone line jack in the event of the following:
and adjust the alarm settings. way conference call, like this: - Noise is heard during conversations.
The phonebook built in your cordless phone allows you to store frequently used numbers so that you can 3. Press the key to choose AUDIO SETUP , answer the internal call.
easily make a call without having to remember or enter the phone number. press the MENU/R
key. 1. During an external call, press the key and - Caller ID features do not function properly.
1. Press the MENU/R
key.
3. At the end of your conversation, press the
then the number of the handset you want to
Character Map 4. Use or key to choose SPEAKER VOL or key.
2. Press or key repeatedly to choose HS join the 3-way call.
To enter a specific alphanumeric character, press one or more times the relevant key for the required EARPIECE V , press key. MENU/R
SETTING menu, then press the key. MENU/R

character according to the following table: once for the first character, twice for the second and so on. Note: 2. The called party press key to answer.
3. Press the MENU/R
key again to choose ALARM . 5. The display shows the current setting. Use the During the internal call, if an external call
Key Characters in the displayed order or key to choose the volume level comes in, the LCD will show the caller's 3. The calling party can press the key to start
4. The display shows the current set. Use the (VOLUME 1-VOLUME 5), press the key. MENU/R
number. You should press the key to end the 3-way call. To single-line
0 (spc) 0 & / .
or key to select ON / OFF , press the the internal call first then press the key telephone jack
_ 1 @ _ ?
1 key.
MENU/R Key Tone to answer the call. 4. Either of the two internal handsets can press
2 A b C 2 Every time you press a key, your handset the key to leave the conference call at any
5. If you select ON , the display indicates you time.
3 d E F 3 acknowledges it with a key tone. You can Call transfer between handsets Noise filter
to enter the time in HH : MM format.
disable the key tones for a silent use. In certain
4 G H I 4 You can transfer an external call between the Note:
6. Press the key, a beep sounds and the
MENU/R error conditions, a warning tone will sound handsets those are registered to the same base.
5 J K L 5 If one of the handsets drops the conference
display shows SNOOZE ON/OFF, you can when an incorrect key is pressed.
call, the remaining handsets will continue the
6 M N O 6 press or key to enable or disable the 1. Press the MENU/R
key. conference. War ranty and Ser vice Infor mation
7 P q R S 7 snooze function on the alarm and press
2. Press or key repeatedly to choose HS
the key.
n Caller ID on call waiting For Warranty and Product support contact Authorized SANYO DISTRIBUTOR
MENU/R
8 T U V 8 SETTING menu, then press the key. MENU/R

9 W X y Z 9 7. When the alarm sounds, press any key to Alcom Electronics Pte Ltd - Singapore
3. Use or key to choose TONE SETUP When you subscribe to Call Waiting service from
switch it off. 2.Press the MENU/R
key to answer the second caller.
menu, press the key. MENU/R
your local telephone company, the telephone
Adding the Phone book Entries 6. Repeat if necessary. Phone: (65) 68412668
will display the name and number of the second 3.When you have finished, press the key to MENU/R
Fax: (65) 68412628
Notes : 4. Press the MENU/R
key again to choose KEY TONE .
1. Press the MENU/R
key. * If you want to set a VIP number, you should continue with your conversation with the first
At step 5 you need to enter the time in caller while you are having a conversation.
select a special ring tone for it. The ring tone 5. You can use or key to choose ON or caller. Alcom Communications Sdn Bhd - Malaysia
2. Press the key to choose PHONE BOOK , 24-Hour format.
should be different from the external ring you OFF to enable or disable the function. Caller ID info displayed Caller two's information
press the MENU/R
key. If you press any key at the right time the is displayed
have set. You can set up to 9 VIP ring tones 6. Press the key. Note: Phone: (60) 3 7803 7676
alarm to ring, the alarm will be silent.
MENU/R
Caller 1
3. Press MENU/R
key again to choose ADD ENTRY. associate with 9 VIP numbers/groups. Caller 1 If you have transferred an external call to Fax: (60) 3 7803 0660
If you choose SNOOZE ON , the alarm will 4361234
4 another handset, you cannot use the call
4. The display shows "NAME ?". Enter the name ring at regular intervals of 10 minutes. Note: Caller 2
Note: waiting function via the second handset.
you want to use, then press the key to MENU/R
For normal use, we recommend you leave 2915678 Email: [email protected]
confirm. The display shows "NUMBER ?". If you make a mistake while entering a the key tone enabled. This makes the
Audio Setup Website: www.alcomonline.com
Enter the desired number (up to 20 digits), name or a number, use the C/ key to phone easier to use. 1.When you are on the line, the telephone will
correct it. Each time you press the key, the You can also use the menu to adjust the audio
press the key.
MENU/R
automatically display the name and number of the
last character or digit is deleted. volume. Due to continuous product development all features and specifications are subject to change
5.*Use or key to select the ring you like to second caller.
without prior notice.
associate with the number, press the key MENU/R 1. Press the MENU/R
key.
to confirm.

Downloaded from www.Manualslib.com manuals search engine