MOBILGREASE EP 2 Page 1 of 2
MOBILGREASE EP 2
Mobil Grease , Pakistan
Industrial Greases
Product Description
Mobilgrease EP 2 is a general purpose lithium hydroxystearate grease formulated to provide protection against wear, corrosion and water washout. Available
as an NLGI 2 grade with a base oil viscosity of ISO VG 150 to address a variety of both industrial and commercial vehicle applications.
Mobilgrease EP 2 is recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are
present. The grease provide good protection against rust and corrosion and resist water wash-out. Mobilgrease EP 2 is also suitable for commercial vehicle and
construction equipment applications such as chassis joints and pin bushing lubrication. The recommended operating temperature range is from -20ºC to 130ºC
but Mobilgrease EP 2 may be used at higher temperatures if the lubrication frequency is increased accordingly.
Features and Benefits
Mobilgrease EP 2 has good performance in preventing corrosion and protecting equipment from high loads and water contamination.
• Reduced wear under heavy or shock loading and vibration for equipment reliability
• Protection against rust and corrosion and resistance to water washout
• Cost effective performance in applications where frequent re-greasing is necessary
Applications
Mobilgrease EP 2 is recommended for multipurpose applications in antifriction and plain bearings, bushings and pins under normal operating conditions in both
industrial and commercial vehicle applications.
Mobilgrease EP 2 is well suited for applications where frequent re-greasing is required due to leakage or contamination and a cost effective grease is required.
Properties and Specifications
Property
Grade NLGI 2
Thickener Type Lithium
Base Oil Viscosity of Greases @ 40 C, mm2/s, AMS 1697 150
Color, Visual BROWN
Dropping Point, °C, ASTM D2265 190
Penetration, 60X, 0.1 mm, ASTM D217 280
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims
/psims.aspx
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
15.05.2025
MOBILGREASE EP 2 Page 2 of 2
09-2020
Mobil Askari Lubricants Limited
D-46, Block-5
KDA Scheme-5, Clifton
Karachi, Pakistan
Phone: (92-21) 111-840-840 Fax : (92-21) 583-1013 and 583-0082
http://www.exxonmobil.com
Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not affect product
performance are to be expected during normal manufacture and at different blending locations. The information contained herein is subject to change without
notice. All products may not be available locally. For more information, contact your local ExxonMobil contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is
intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability remains with the local
ExxonMobil-affiliate entities.
© Copyright 2003-2025 Exxon Mobil Corporation. All
Rights Reserved
15.05.2025
