Scribd
Upload
3 views2 pages

0M3203X97 Re18309-37

The document provides technical specifications for a 3-way, pressure compensated flow regulator (VRFC3) with an operating pressure of up to 210 bar and a maximum inlet flow of 40 l/min. It details the flow characteristics, adjustment options, and material specifications, emphasizing the importance of consulting for applications outside the stated parameters. Additionally, it includes ordering codes and preferred types for the regulator.

Uploaded by

Murugesh Salem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views2 pages

0M3203X97 Re18309-37

The document provides technical specifications for a 3-way, pressure compensated flow regulator (VRFC3) with an operating pressure of up to 210 bar and a maximum inlet flow of 40 l/min. It details the flow characteristics, adjustment options, and material specifications, emphasizing the importance of consulting for applications outside the stated parameters. Additionally, it includes ordering codes and preferred types for the regulator.

Uploaded by

Murugesh Salem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Flow regulator

3 way, pressure compensated


RE 18309-37
Edition: 03.2016
VRFC3 0M.32.03 - X - 97 Replaces: 04.2010

Technical data
Operating pressure up to 210 bar (3000 psi)
QE= max. inlet flow “E” port 40 l/min. (11 gpm)
QR= max. regulated flow “R” port 25 l/min. (7 gpm)
Flow range adjustment 0 - 3 turns
Weight 0.55 kg (1.21 lbs)
Manifold material Aluminium
Note: aluminium bodies are often strong enough for operating
pressures exceeding 210 bar (3000 psi), depending from the
fatigue life expected in the specific application. If in doubt, consult
our Service Network.
Fluid Mineral oil (HL, HLP) according
Description
DIN 51524
A constant flow rate, regardless of system pressures, is
Fluid temperature range -30 °C to 100 (-22 to 212 °F)
established from E to R, while a minimum pressure
Viscosity range 5 to 800 mm2/s (cSt)
differential of appr. 5 bar (70 psi) exists between the two
Recommended degree of fluid Class 19/17/14 according to
ports. Input flow supplied to E in excess of the regulated
contamination ISO 4406
output at R is by-passed to T. Output flow can be varied
Other technical data see data sheet 18350-50
from closed to the nominal maximum rating for the valve.
Note: for applications outside these parameters, please consult us.
Reverse flow from R to E is limited by the selected opening
of the restrictor and is not pressure compensated. Flow
from T to E or from T to R is not possible. Increasing or
decreasing inlet flow may cause slight increase or decrease
of Regulated flow.

Characteristic curve
Flow Q

Pressure Δp

 RE 18309-37/03.2016, Bosch Rexroth Oil Control S.p.A.


Dimensions [mm (inches)]
2 VRFC3 | Flow regulator 3 way, pressure compensated

Ordering code
0M.32.03 X 97

Flow regulator,
3 way, pressure compensated

Adjustments Port sizes E-R-T

G 3/8
70 Handknob and locknut

80 Screw and locknut

40 Graduated handknob

Preferred types
Type Material number Type Material number
0M3203709700000 R930004239
0M3203809700000 R930004246
0M3203409700000 R930004226

Dimensions

Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Via Leonardo da Vinci 5 forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
P.O. Box no. 5 may not be reproduced or given to third parties without its consent. The data
41015 Nonantola – Modena, Italy specified above only serve to describe the product. No statements concerning
Tel. +39 059 887 611 a certain condition or suitability for a certain application can be derived from
Fax +39 059 547 848 our information. The information given does not release the user from the
[email protected] obligation of own judgment and verification. It must be remembered that our
www.boschrexroth.com/compacthydraulics products are subject to a natural process of wear and aging. Subject to change.

Bosch Rexroth Oil Control S.p.A., RE 18309-37/03.2016

You might also like