Snap-In Aluminum Electrolytic Capacitors

ELG, +105°C

Overview Applications
The KEMET ELG aluminum electrolytic snap-in capacitors Typical applications include general purpose power
are designed with snap-lock terminals for printed circuit electronics, UPS, SMPS, and battery chargers.
board mounting. The case is aluminum with an insulated
sleeve and safety vent at the bottom.

Benefits
• Suited for high reliability, low ESR applications
• Operating temperature of up to 105°C
• 2,000 hour operating life
• RoHS compliant and lead-free

Part Number System

ELG 129 M 6R3 A Q1 AA

Capacitance Code Rated Voltage Electrical
Series Tolerance Size Code Packaging
(pF) (VDC) Parameters
Snap-In First two digits M = ±20% 6R3 = 6.3 160 = 160 A = Standard See Dimension See Ordering
Aluminum represent 010 = 10 180 = 180 Table Options Table
Electrolytic significant 016 = 16 200 = 200
figures for 025 = 25 250 = 250
capacitance 035 = 35 350 = 350
values. Last 050 = 50 400 = 400
digit specifies 063 = 63 420 = 420
the number 080 = 80 450 = 450
of zeros to be 100 = 100 500 = 500
added.

Ordering Options Table

Lead and
Packaging Type Lead Length (mm)
Packaging Code
Standard Bulk Packaging Options
Bulk (box) 5.8 ± 1.0 AA
Bulk (box) 4.0 ± 1.0 AV

Built Into Tomorrow

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 1
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Dimensions – Millimeters

SIDE VIEW TERMINAL DETAIL TERMINAL PCB LAYOUT

END VIEW
L 0.8 ±0.1
0.8 ±0.1

3 ±0.5

D
5.8±1

1.5 ±0.1 P
LL 1.5 ±0.1

D L p
Size Code
Nominal Tolerance Nominal Tolerance Nominal Tolerance
Q7 22 +1.0/−0 20 +2.0/−0 10.0 ±0.5
Q1 22 +1.0/−0 25 +2.0/−0 10.0 ±0.5
Q2 22 +1.0/−0 30 +2.0/−0 10.0 ±0.5
Q3 22 +1.0/−0 35 +2.0/−0 10.0 ±0.5
Q4 22 +1.0/−0 40 +2.0/−0 10.0 ±0.5
Q5 22 +1.0/−0 45 +2.0/−0 10.0 ±0.5
Q6 22 +1.0/−0 50 +2.0/−0 10.0 ±0.5
R7 25 +1.0/−0 20 +2.0/−0 10.0 ±0.5
R1 25 +1.0/−0 25 +2.0/−0 10.0 ±0.5
R2 25 +1.0/−0 30 +2.0/−0 10.0 ±0.5
R3 25 +1.0/−0 35 +2.0/−0 10.0 ±0.5
R4 25 +1.0/−0 40 +2.0/−0 10.0 ±0.5
R5 25 +1.0/−0 45 +2.0/−0 10.0 ±0.5
R6 25 +1.0/−0 50 +2.0/−0 10.0 ±0.5
S1 30 +1.0/−0 25 +2.0/−0 10.0 ±0.5
S2 30 +1.0/−0 30 +2.0/−0 10.0 ±0.5
S3 30 +1.0/−0 35 +2.0/−0 10.0 ±0.5
S4 30 +1.0/−0 40 +2.0/−0 10.0 ±0.5
S5 30 +1.0/−0 45 +2.0/−0 10.0 ±0.5
S6 30 +1.0/−0 50 +2.0/−0 10.0 ±0.5
S8 30 +1.0/−0 60 +2.0/−0 10.0 ±0.5
T1 35 +1.0/−0 25 +2.0/−0 10.0 ±0.5
T2 35 +1.0/−0 30 +2.0/−0 10.0 ±0.5
T3 35 +1.0/−0 35 +2.0/−0 10.0 ±0.5
T4 35 +1.0/−0 40 +2.0/−0 10.0 ±0.5
T5 35 +1.0/−0 45 +2.0/−0 10.0 ±0.5
T6 35 +1.0/−0 50 +2.0/−0 10.0 ±0.5
T8 35 +1.0/−0 60 +2.0/−0 10.0 ±0.5

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 2

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like
China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic
equipment. All products in this catalog are produced to help our customers’ obligations to guarantee their products and fulfill
these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed
from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will
closely follow any changes in legislation world wide and make any necessary changes in its products, whenever needed.

Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.

Due to customer requirements, there may appear additional markings such as lead free (LF) or lead-free wires (LFW) on the
label.

Performance Characteristics

Item Performance Characteristics

Capacitance Range 560 – 82,000 µF 47 – 2,200 µF

Capacitance Tolerance ±20% at 120 Hz/20°C

Rated Voltage 6.3 – 100 VDC 160 – 500 VDC

Life Test 2,000 hours (see conditions in Test Methods & Performance)

Operating Temperature −40°C to +105°C −25°C to +105°C

I = 0.02 CV (mA) or 3 mA, whichever is smaller

Leakage Current
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at 20°C.

Impedance Z Characteristics at 120 Hz

Rated Voltage (VDC) 6.3 – 16 25 35 50 – 63 80 – 100 160 – 400 420 – 450 500
Z (−25°C)/Z (20°C) 4 3 3 2 2 4 8 8
Z (−40°C)/Z (20°C) 15 10 8 6 5

Compensation Factor of Ripple Current (RC) vs. Frequency

Rated Voltage (VDC) 50 Hz 60 Hz 120 Hz 1 kHz 10 kHz

6.3 – 100 0.88 0.90 1.00 1.15 1.16
160 – 250 0.85 0.88 1.00 1.30 1.50
350 – 450 0.88 0.90 1.00 1.35 1.45
500 0.70 0.72 1.00 1.30 1.41

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 3

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Test Method & Performance

Conditions Load Life Test Shelf Life Test

Temperature 105°C 105°C

Test Duration 2,000 hours 1,000 hours

Maximum ripple current specified at 120 kHz 105°C
Ripple Current No ripple current applied
specified in table
The sum of DC voltage and the peak AC voltage
Voltage No voltage applied
must not exceed the rated voltage of the capacitor

Performance The following specifications will be satisfied when the capacitor is restored to 20°C:
Capacitance Change Within ±20% of the initial value

Dissipation Factor Does not exceed 200% of the specified value Does not exceed 200% of the specified value

Leakage Current Does not exceed specified value

Shelf Life
The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however,
the leakage current will very slowly increase.

KEMET's E aluminum electrolytic capacitors should not be stored in high temperatures or where there is a high level of
humidity. The suitable storage condition for KEMET's E aluminum electrolytic capacitors is +5 to +35°C and less than 75%
in relative humidity. KEMET's E aluminum electrolytic capacitors should not be stored in damp conditions such as water,
saltwater spray or oil spray. KEMET's E aluminum electrolytic capacitors should not be stored in an environment full of
hazardous gas (hydrogen sulphide, sulphurous acid gas, nitrous acid, chlorine gas, ammonium, etc.) KEMET's E aluminum
electrolytic capacitors should not be stored under exposure to ozone, ultraviolet rays or radiation.

If a capacitor has been stored for more than 18 months under these conditions and it shows increased leakage current,
then a treatment by voltage application is recommended.

Re-Age (Reforming) Procedure

Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen
to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage
current or 5 mA, whichever is greater, is suggested.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 4

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
6.3 8 12,000 22 x 25 60 1.55 1.5 0.066 ELG129M6R3AQ1(1)
6.3 8 15,000 22 x 30 60 1.70 1.9 0.053 ELG159M6R3AQ2(1)
6.3 8 18,000 22 x 30 60 1.95 2.3 0.044 ELG189M6R3AQ2(1)
6.3 8 22,000 22 x 35 60 2.25 2.8 0.036 ELG229M6R3AQ3(1)
6.3 8 27,000 22 x 40 60 2.55 3.0 0.029 ELG279M6R3AQ4(1)
6.3 8 33,000 22 x 45 60 2.90 3.0 0.024 ELG339M6R3AQ5(1)
6.3 8 15,000 25 x 25 60 1.70 1.9 0.053 ELG159M6R3AR1(1)
6.3 8 18,000 25 x 25 60 1.95 2.3 0.044 ELG189M6R3AR1(1)
6.3 8 22,000 25 x 30 60 2.25 2.8 0.036 ELG229M6R3AR2(1)
6.3 8 27,000 25 x 35 60 2.55 3.0 0.029 ELG279M6R3AR3(1)
6.3 8 33,000 25 x 40 60 2.95 3.0 0.024 ELG339M6R3AR4(1)
6.3 8 39,000 25 x 50 60 3.25 3.0 0.020 ELG399M6R3AR6(1)
6.3 8 47,000 25 x 50 60 3.70 3.0 0.017 ELG479M6R3AR6(1)
6.3 8 22,000 30 x 25 60 2.25 2.8 0.036 ELG229M6R3AS1(1)
6.3 8 27,000 30 x 30 60 2.55 3.0 0.029 ELG279M6R3AS2(1)
6.3 8 33,000 30 x 30 60 2.90 3.0 0.024 ELG339M6R3AS2(1)
6.3 8 39,000 30 x 35 60 3.25 3.0 0.020 ELG399M6R3AS3(1)
6.3 8 47,000 30 x 40 60 3.70 3.0 0.017 ELG479M6R3AS4(1)
6.3 8 56,000 30 x 45 60 4.15 3.0 0.014 ELG569M6R3AS5(1)
6.3 8 68,000 30 x 50 60 4.70 3.0 0.012 ELG689M6R3AS6(1)
6.3 8 27,000 35 x 25 60 2.55 3.0 0.029 ELG279M6R3AT1(1)
6.3 8 33,000 35 x 25 60 2.95 3.0 0.024 ELG339M6R3AT1(1)
6.3 8 39,000 35 x 30 60 3.30 3.0 0.020 ELG399M6R3AT2(1)
6.3 8 56,000 35 x 35 60 4.10 3.0 0.014 ELG569M6R3AT3(1)
6.3 8 68,000 35 x 40 60 4.70 3.0 0.012 ELG689M6R3AT4(1)
6.3 8 82,000 35 x 45 60 5.30 3.0 0.010 ELG829M6R3AT5(1)
10 13 12,000 22 x 30 55 1.75 2.4 0.061 ELG129M010AQ2(1)
10 13 15,000 22 x 30 55 1.90 3.0 0.049 ELG159M010AQ2(1)
10 13 18,000 22 x 35 55 2.20 3.0 0.041 ELG189M010AQ3(1)
10 13 22,000 22 x 40 55 2.50 3.0 0.033 ELG229M010AQ4(1)
10 13 27,000 22 x 50 55 2.95 3.0 0.027 ELG279M010AQ6(1)
10 13 10,000 25 x 25 55 1.55 2.0 0.073 ELG109M010AR1(1)
10 13 15,000 25 x 25 55 1.90 3.0 0.049 ELG159M010AR1(1)
10 13 18,000 25 x 30 55 2.25 3.0 0.041 ELG189M010AR2(1)
10 13 22,000 25 x 35 55 2.55 3.0 0.033 ELG229M010AR3(1)
10 13 27,000 25 x 40 55 2.90 3.0 0.027 ELG279M010AR4(1)
10 13 33,000 25 x 45 55 3.30 3.0 0.022 ELG339M010AR5(1)
10 13 39,000 25 x 50 55 3.70 3.0 0.019 ELG399M010AR6(1)
10 13 22,000 30 x 25 55 2.45 3.0 0.033 ELG229M010AS1(1)
10 13 27,000 30 x 30 55 2.85 3.0 0.027 ELG279M010AS2(1)
10 13 33,000 30 x 35 55 3.30 3.0 0.022 ELG339M010AS3(1)
10 13 39,000 30 x 40 55 3.70 3.0 0.019 ELG399M010AS4(1)
10 13 47,000 30 x 45 55 4.20 3.0 0.016 ELG479M010AS5(1)
10 13 56,000 30 x 50 55 4.65 3.0 0.013 ELG569M010AS6(1)
10 13 27,000 35 x 25 55 2.80 3.0 0.027 ELG279M010AT1(1)
10 13 33,000 35 x 30 55 3.30 3.0 0.022 ELG339M010AT2(1)
10 13 39,000 35 x 30 55 3.65 3.0 0.019 ELG399M010AT2(1)
10 13 47,000 35 x 35 55 3.80 3.0 0.016 ELG479M010AT3(1)
10 13 56,000 35 x 40 55 4.65 3.0 0.013 ELG569M010AT4(1)
10 13 68,000 35 x 50 55 5.50 3.0 0.011 ELG689M010AT6(1)
16 20 6,800 22 x 25 55 1.55 2.2 0.107 ELG688M016AQ1(1)
16 20 8,200 22 x 30 55 1.70 2.6 0.089 ELG828M016AQ2(1)
16 20 10,000 22 x 30 55 1.95 3.0 0.073 ELG109M016AQ2(1)
16 20 12,000 22 x 35 55 2.20 3.0 0.061 ELG129M016AQ3(1)
16 20 15,000 22 x 40 55 2.55 3.0 0.049 ELG159M016AQ4(1)
16 20 18,000 22 x 45 55 2.90 3.0 0.041 ELG189M016AQ5(1)
16 20 8,200 25 x 25 55 1.70 2.6 0.089 ELG828M016AR1(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 5

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
16 20 10,000 25 x 25 55 1.95 3.0 0.073 ELG109M016AR1(1)
16 20 12,000 25 x 30 55 2.25 3.0 0.061 ELG129M016AR2(1)
16 20 15,000 25 x 35 55 2.60 3.0 0.049 ELG159M016AR3(1)
16 20 18,000 25 x 40 55 2.90 3.0 0.041 ELG189M016AR4(1)
16 20 22,000 25 x 45 55 3.30 3.0 0.033 ELG229M016AR5(1)
16 20 27,000 25 x 50 55 3.80 3.0 0.027 ELG279M016AR6(1)
16 20 12,000 30 x 25 55 2.30 3.0 0.061 ELG129M016AS1(1)
16 20 15,000 30 x 30 55 2.60 3.0 0.049 ELG159M016AS2(1)
16 20 18,000 30 x 30 55 2.90 3.0 0.041 ELG189M016AS2(1)
16 20 22,000 30 x 35 55 3.30 3.0 0.033 ELG229M016AS3(1)
16 20 27,000 30 x 40 55 3.75 3.0 0.027 ELG279M016AS4(1)
16 20 33,000 30 x 45 55 4.30 3.0 0.022 ELG339M016AS5(1)
16 20 39,000 30 x 50 55 4.80 3.0 0.019 ELG399M016AS6(1)
16 20 15,000 35 x 25 55 2.65 3.0 0.049 ELG159M016AT1(1)
16 20 18,000 35 x 25 55 2.95 3.0 0.041 ELG189M016AT1(1)
16 20 22,000 35 x 30 55 3.30 3.0 0.033 ELG229M016AT2(1)
16 20 27,000 35 x 30 55 3.75 3.0 0.027 ELG279M016AT2(1)
16 20 33,000 35 x 35 55 4.25 3.0 0.022 ELG339M016AT3(1)
16 20 39,000 35 x 40 55 4.80 3.0 0.019 ELG399M016AT4(1)
16 20 47,000 35 x 45 55 5.45 3.0 0.016 ELG479M016AT5(1)
16 20 56,000 35 x 45 55 5.65 3.0 0.013 ELG569M016AT5(1)
16 20 68,000 35 x 50 55 6.20 3.0 0.011 ELG689M016AT6(1)
25 32 4,700 22 x 25 45 1.50 2.4 0.127 ELG478M025AQ1(1)
25 32 5,600 22 x 30 45 1.65 2.8 0.107 ELG568M025AQ2(1)
25 32 6,800 22 x 30 45 1.85 3.0 0.088 ELG688M025AQ2(1)
25 32 8,200 22 x 35 45 2.10 3.0 0.073 ELG828M025AQ3(1)
25 32 10,000 22 x 40 45 2.40 3.0 0.060 ELG109M025AQ4(1)
25 32 12,000 22 x 45 45 2.70 3.0 0.050 ELG129M025AQ5(1)
25 32 5,600 25 x 25 45 1.65 2.8 0.107 ELG568M025AR1(1)
25 32 6,800 25 x 25 45 1.85 3.0 0.088 ELG688M025AR1(1)
25 32 8,200 25 x 30 45 2.10 3.0 0.073 ELG828M025AR2(1)
25 32 10,000 25 x 35 45 2.40 3.0 0.060 ELG109M025AR3(1)
25 32 12,000 25 x 40 45 2.75 3.0 0.050 ELG129M025AR4(1)
25 32 15,000 25 x 45 45 3.15 3.0 0.040 ELG159M025AR5(1)
25 32 18,000 25 x 50 45 3.55 3.0 0.033 ELG189M025AR6(1)
25 32 8,200 30 x 25 45 2.15 3.0 0.073 ELG828M025AS1(1)
25 32 10,000 30 x 30 45 2.40 3.0 0.060 ELG109M025AS2(1)
25 32 12,000 30 x 30 45 2.70 3.0 0.050 ELG129M025AS2(1)
25 32 15,000 30 x 35 45 3.15 3.0 0.040 ELG159M025AS3(1)
25 32 18,000 30 x 40 45 3.55 3.0 0.033 ELG189M025AS4(1)
25 32 22,000 30 x 45 45 4.05 3.0 0.027 ELG229M025AS5(1)
25 32 10,000 35 x 25 45 2.40 3.0 0.060 ELG109M025AT1(1)
25 32 12,000 35 x 25 45 2.75 3.0 0.050 ELG129M025AT1(1)
25 32 15,000 35 x 30 45 3.25 3.0 0.040 ELG159M025AT2(1)
25 32 18,000 35 x 35 45 3.55 3.0 0.033 ELG189M025AT3(1)
25 32 22,000 35 x 35 45 3.80 3.0 0.027 ELG229M025AT3(1)
25 32 27,000 35 x 45 45 4.70 3.0 0.022 ELG279M025AT5(1)
25 32 39,000 35 x 45 45 5.50 3.0 0.015 ELG399M025AT5(1)
25 32 33,000 35 x 50 45 5.40 3.0 0.018 ELG339M025AT6(1)
25 32 47,000 35 x 50 45 6.00 3.0 0.013 ELG479M025AT6(1)
35 44 3,300 22 x 25 35 1.40 2.3 0.141 ELG338M035AQ1(1)
35 44 3,900 22 x 30 35 1.55 2.7 0.119 ELG398M035AQ2(1)
35 44 4,700 22 x 35 35 1.80 3.0 0.099 ELG478M035AQ3(1)
35 44 5,600 22 x 35 35 1.95 3.0 0.083 ELG568M035AQ3(1)
35 44 6,800 22 x 40 35 2.20 3.0 0.068 ELG688M035AQ4(1)
35 44 8,200 22 x 50 35 2.55 3.0 0.057 ELG828M035AQ6(1)
35 44 3,900 25 x 25 35 1.55 2.7 0.119 ELG398M035AR1(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 6

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
35 44 4,700 25 x 25 35 1.80 3.0 0.099 ELG478M035AR1(1)
35 44 5,600 25 x 30 35 1.95 3.0 0.083 ELG568M035AR2(1)
35 44 6,800 25 x 35 35 2.25 3.0 0.068 ELG688M035AR3(1)
35 44 8,200 25 x 40 35 2.50 3.0 0.057 ELG828M035AR4(1)
35 44 10,000 25 x 45 35 2.85 3.0 0.046 ELG109M035AR5(1)
35 44 12,000 25 x 50 35 3.25 3.0 0.039 ELG129M035AR6(1)
35 44 5,600 30 x 25 35 2.00 3.0 0.083 ELG568M035AS1(1)
35 44 6,800 30 x 30 35 2.30 3.0 0.068 ELG688M035AS2(1)
35 44 8,200 30 x 30 35 2.75 3.0 0.057 ELG828M035AS2(1)
35 44 10,000 30 x 35 35 2.90 3.0 0.046 ELG109M035AS3(1)
35 44 12,000 30 x 40 35 3.25 3.0 0.039 ELG129M035AS4(1)
35 44 15,000 30 x 45 35 3.70 3.0 0.031 ELG159M035AS5(1)
35 44 22,000 30 x 50 35 4.90 3.0 0.021 ELG229M035AS6(1)
35 44 6,800 35 x 25 35 2.35 3.0 0.068 ELG688M035AT1(1)
35 44 8,200 35 x 25 35 2.75 3.0 0.057 ELG828M035AT1(1)
35 44 10,000 35 x 30 35 2.95 3.0 0.046 ELG109M035AT2(1)
35 44 12,000 35 x 30 35 3.15 3.0 0.039 ELG129M035AT2(1)
35 44 15,000 35 x 35 35 3.65 3.0 0.031 ELG159M035AT3(1)
35 44 18,000 35 x 40 35 4.35 3.0 0.026 ELG189M035AT4(1)
50 63 1,800 22 x 25 30 1.30 1.8 0.221 ELG188M050AQ1(1)
50 63 2,200 22 x 30 30 1.55 2.2 0.181 ELG228M050AQ2(1)
50 63 2,700 22 x 30 30 1.70 2.7 0.147 ELG278M050AQ2(1)
50 63 3,300 22 x 35 30 1.95 3.0 0.121 ELG338M050AQ3(1)
50 63 3,900 22 x 40 30 2.15 3.0 0.102 ELG398M050AQ4(1)
50 63 4,700 22 x 45 30 2.45 3.0 0.085 ELG478M050AQ5(1)
50 63 5,600 22 x 50 30 2.75 3.0 0.071 ELG568M050AQ6(1)
50 63 2,200 25 x 25 30 1.55 2.2 0.181 ELG228M050AR1(1)
50 63 2,700 25 x 25 30 1.70 2.7 0.147 ELG278M050AR1(1)
50 63 3,300 25 x 30 30 1.85 3.0 0.121 ELG338M050AR2(1)
50 63 3,900 25 x 35 30 2.20 3.0 0.102 ELG398M050AR3(1)
50 63 4,700 25 x 40 30 2.45 3.0 0.085 ELG478M050AR4(1)
50 63 5,600 25 x 40 30 2.70 3.0 0.071 ELG568M050AR4(1)
50 63 6,800 25 x 50 30 3.30 3.0 0.059 ELG688M050AR6(1)
50 63 3,900 30 x 25 30 1.95 3.0 0.102 ELG398M050AS1(1)
50 63 4,700 30 x 30 30 2.45 3.0 0.085 ELG478M050AS2(1)
50 63 5,600 30 x 35 30 2.75 3.0 0.071 ELG568M050AS3(1)
50 63 6,800 30 x 40 30 3.30 3.0 0.059 ELG688M050AS4(1)
50 63 8,200 30 x 45 30 3.60 3.0 0.049 ELG828M050AS5(1)
50 63 10,000 30 x 50 30 4.05 3.0 0.040 ELG109M050AS6(1)
50 63 4,700 35 x 25 30 2.50 3.0 0.085 ELG478M050AT1(1)
50 63 5,600 35 x 30 30 2.75 3.0 0.071 ELG568M050AT2(1)
50 63 6,800 35 x 30 30 3.25 3.0 0.059 ELG688M050AT2(1)
50 63 8,200 35 x 35 30 3.55 3.0 0.049 ELG828M050AT3(1)
50 63 10,000 35 x 40 30 4.00 3.0 0.040 ELG109M050AT4(1)
50 63 12,000 35 x 45 30 4.55 3.0 0.033 ELG129M050AT5(1)
63 79 1,200 22 x 25 25 1.20 1.5 0.276 ELG128M063AQ1(1)
63 79 1,500 22 x 30 25 1.30 1.9 0.221 ELG158M063AQ2(1)
63 79 1,800 22 x 30 25 1.50 2.3 0.184 ELG188M063AQ2(1)
63 79 2,200 22 x 35 25 1.70 2.8 0.151 ELG228M063AQ3(1)
63 79 2,700 22 x 40 25 2.00 3.0 0.123 ELG278M063AQ4(1)
63 79 3,300 22 x 50 25 2.30 3.0 0.101 ELG338M063AQ6(1)
63 79 1,500 25 x 25 25 1.30 1.9 0.221 ELG158M063AR1(1)
63 79 1,800 25 x 25 25 1.50 2.3 0.184 ELG188M063AR1(1)
63 79 2,200 25 x 30 25 1.75 2.8 0.151 ELG228M063AR2(1)
63 79 2,700 25 x 35 25 2.00 3.0 0.123 ELG278M063AR3(1)
63 79 3,300 25 x 40 25 2.30 3.0 0.101 ELG338M063AR4(1)
63 79 3,900 25 x 45 25 2.55 3.0 0.085 ELG398M063AR5(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 7

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
63 79 4,700 25 x 50 25 2.85 3.0 0.071 ELG478M063AR6(1)
63 79 2,200 30 x 25 25 1.80 2.8 0.151 ELG228M063AS1(1)
63 79 2,700 30 x 25 25 1.95 3.0 0.123 ELG278M063AS1(1)
63 79 3,300 30 x 30 25 2.25 3.0 0.101 ELG338M063AS2(1)
63 79 3,900 30 x 35 25 2.55 3.0 0.085 ELG398M063AS3(1)
63 79 4,700 30 x 40 25 2.85 3.0 0.071 ELG478M063AS4(1)
63 79 5,600 30 x 45 25 3.20 3.0 0.059 ELG568M063AS5(1)
63 79 6,800 30 x 50 25 3.65 3.0 0.049 ELG688M063AS6(1)
63 79 3,300 35 x 25 25 2.10 3.0 0.101 ELG338M063AT1(1)
63 79 3,900 35 x 30 25 2.55 3.0 0.085 ELG398M063AT2(1)
63 79 4,700 35 x 30 25 2.80 3.0 0.071 ELG478M063AT2(1)
63 79 5,600 35 x 35 25 3.20 3.0 0.059 ELG568M063AT3(1)
63 79 6,800 35 x 40 25 3.65 3.0 0.049 ELG688M063AT4(1)
63 79 8,200 35 x 45 25 3.90 3.0 0.040 ELG828M063AT5(1)
63 79 10,000 35 x 50 25 4.40 3.0 0.033 ELG109M063AT6(1)
80 100 820 22 x 25 25 1.10 1.3 0.405 ELG827M080AQ1(1)
80 100 1,000 22 x 30 25 1.20 1.6 0.332 ELG108M080AQ2(1)
80 100 1,200 22 x 30 25 1.40 1.9 0.276 ELG128M080AQ2(1)
80 100 1,500 22 x 35 25 1.60 2.4 0.221 ELG158M080AQ3(1)
80 100 1,800 22 x 40 25 1.80 2.9 0.184 ELG188M080AQ4(1)
80 100 2,200 22 x 45 25 2.05 3.0 0.151 ELG228M080AQ5(1)
80 100 1,000 25 x 25 25 1.20 1.6 0.332 ELG108M080AR1(1)
80 100 1,200 25 x 25 25 1.40 1.9 0.276 ELG128M080AR1(1)
80 100 1,500 25 x 30 25 1.60 2.4 0.221 ELG158M080AR2(1)
80 100 1,800 25 x 35 25 1.85 2.9 0.184 ELG188M080AR3(1)
80 100 2,200 25 x 35 25 2.00 3.0 0.151 ELG228M080AR3(1)
80 100 2,700 25 x 45 25 2.35 3.0 0.123 ELG278M080AR5(1)
80 100 3,300 25 x 50 25 2.70 3.0 0.101 ELG338M080AR6(1)
80 100 1,500 30 x 25 25 1.65 2.4 0.221 ELG158M080AS1(1)
80 100 1,800 30 x 25 25 1.80 2.9 0.184 ELG188M080AS1(1)
80 100 2,200 30 x 30 25 2.05 3.0 0.151 ELG228M080AS2(1)
80 100 2,700 30 x 35 25 2.35 3.0 0.123 ELG278M080AS3(1)
80 100 3,300 30 x 40 25 2.70 3.0 0.101 ELG338M080AS4(1)
80 100 3,900 30 x 45 25 3.00 3.0 0.085 ELG398M080AS5(1)
80 100 4,700 30 x 50 25 3.40 3.0 0.071 ELG478M080AS6(1)
80 100 2,200 35 x 25 25 2.05 3.0 0.151 ELG228M080AT1(1)
80 100 2,700 35 x 30 25 2.35 3.0 0.123 ELG278M080AT2(1)
80 100 3,300 35 x 30 25 2.55 3.0 0.101 ELG338M080AT2(1)
80 100 3,900 35 x 35 25 3.00 3.0 0.085 ELG398M080AT3(1)
80 100 4,700 35 x 40 25 3.40 3.0 0.071 ELG478M080AT4(1)
80 100 5,600 35 x 45 25 3.80 3.0 0.059 ELG568M080AT5(1)
80 100 6,800 35 x 50 25 3.90 3.0 0.049 ELG688M080AT6(1)
100 125 560 22 x 25 25 1.05 1.1 0.592 ELG567M100AQ1(1)
100 125 680 22 x 25 25 1.20 1.4 0.488 ELG687M100AQ1(1)
100 125 820 22 x 30 25 1.30 1.6 0.405 ELG827M100AQ2(1)
100 125 1,000 22 x 35 25 1.50 2.0 0.332 ELG108M100AQ3(1)
100 125 1,200 22 x 40 25 1.70 2.4 0.276 ELG128M100AQ4(1)
100 125 1,500 22 x 45 25 1.95 3.0 0.221 ELG158M100AQ5(1)
100 125 820 25 x 25 25 1.33 1.6 0.405 ELG827M100AR1(1)
100 125 1,000 25 x 30 25 1.50 2.0 0.332 ELG108M100AR2(1)
100 125 1,200 25 x 35 25 1.70 2.4 0.276 ELG128M100AR3(1)
100 125 1,500 25 x 40 25 2.00 3.0 0.221 ELG158M100AR4(1)
100 125 1,800 25 x 45 25 2.20 3.0 0.184 ELG188M100AR5(1)
100 125 2,200 25 x 50 25 2.55 3.0 0.151 ELG228M100AR6(1)
100 125 1,200 30 x 25 25 1.70 2.4 0.276 ELG128M100AS1(1)
100 125 1,500 30 x 30 25 1.95 3.0 0.221 ELG158M100AS2(1)
100 125 1,800 30 x 35 25 2.50 3.0 0.184 ELG188M100AS3(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 8

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
100 125 2,200 30 x 40 25 2.70 3.0 0.151 ELG228M100AS4(1)
100 125 2,700 30 x 45 25 2.90 3.0 0.123 ELG278M100AS5(1)
100 125 3,300 30 x 50 25 3.25 3.0 0.101 ELG338M100AS6(1)
100 125 3,900 30 x 50 25 3.70 3.0 0.085 ELG398M100AS6(1)
100 125 1,500 35 x 25 25 2.00 3.0 0.221 ELG158M100AT1(1)
100 125 1,800 35 x 30 25 2.45 3.0 0.184 ELG188M100AT2(1)
100 125 2,200 35 x 30 25 2.55 3.0 0.151 ELG228M100AT2(1)
100 125 2,700 35 x 35 25 2.85 3.0 0.123 ELG278M100AT3(1)
100 125 3,300 35 x 40 25 3.25 3.0 0.101 ELG338M100AT4(1)
100 125 3,900 35 x 45 25 3.70 3.0 0.085 ELG398M100AT5(1)
100 125 4,700 35 x 50 25 3.80 3.0 0.071 ELG478M100AT6(1)
100 125 6,800 35 x 50 15 3.9 3.0 0.029 ELG688M100AT6(1)
160 200 220 22 x 20 15 0.80 1.1 0.905 ELG227M160AQ7(1)
160 200 270 22 x 25 15 1.00 0.9 0.737 ELG277M160AQ1(1)
160 200 330 22 x 25 15 1.20 1.1 0.603 ELG337M160AQ1(1)
160 200 390 22 x 30 15 1.30 1.2 0.510 ELG397M160AQ2(1)
160 200 470 22 x 30 15 1.30 1.5 0.423 ELG477M160AQ2(1)
160 200 470 22 x 35 15 1.40 1.5 0.423 ELG477M160AQ3(1)
160 200 560 22 x 40 15 1.50 1.8 0.355 ELG567M160AQ4(1)
160 200 680 22 x 45 15 1.70 2.2 0.293 ELG687M160AQ5(1)
160 200 820 22 x 50 15 1.95 2.6 0.243 ELG827M160AQ6(1)
160 200 330 25 x 20 15 1.15 1.6 0.603 ELG337M160AR7(1)
160 200 390 25 x 25 15 1.30 1.2 0.510 ELG397M160AR1(1)
160 200 470 25 x 25 15 1.40 1.5 0.423 ELG477M160AR1(1)
160 200 560 25 x 30 15 1.50 1.8 0.355 ELG567M160AR2(1)
160 200 680 25 x 35 15 1.70 2.2 0.293 ELG687M160AR3(1)
160 200 820 25 x 40 15 2.00 2.6 0.243 ELG827M160AR4(1)
160 200 1,000 25 x 45 15 2.20 3.0 0.199 ELG108M160AR5(1)
160 200 1,200 25 x 50 15 2.45 3.0 0.166 ELG128M160AR6(1)
160 200 560 30 x 25 15 1.50 1.8 0.355 ELG567M160AS1(1)
160 200 680 30 x 25 15 1.70 2.2 0.293 ELG687M160AS1(1)
160 200 820 30 x 30 15 2.00 2.6 0.243 ELG827M160AS2(1)
160 200 1,000 30 x 35 15 2.20 3.0 0.199 ELG108M160AS3(1)
160 200 1,200 30 x 40 15 2.45 3.0 0.166 ELG128M160AS4(1)
160 200 1,500 30 x 45 15 2.80 3.0 0.133 ELG158M160AS5(1)
160 200 1,800 30 x 50 15 3.30 3.0 0.111 ELG188M160AS6(1)
160 200 820 35 x 25 15 1.90 2.6 0.243 ELG827M160AT1(1)
160 200 1,000 35 x 30 15 2.20 3.0 0.199 ELG108M160AT2(1)
160 200 1,200 35 x 30 15 2.45 3.0 0.166 ELG128M160AT2(1)
160 200 1,500 35 x 35 15 2.80 3.0 0.133 ELG158M160AT3(1)
160 200 1,800 35 x 45 15 3.30 3.0 0.111 ELG188M160AT5(1)
160 200 2,200 35 x 45 15 3.30 3.0 0.090 ELG228M160AT5(1)
160 200 2,200 35 x 50 15 3.75 3.0 0.090 ELG228M160AT6(1)
180 225 180 22 x 20 15 0.75 1.0 1.106 ELG187M180AQ7(1)
180 225 220 22 x 25 15 0.85 0.8 0.905 ELG227M180AQ1(1)
180 225 270 22 x 25 15 0.95 1.0 0.737 ELG277M180AQ1(1)
180 225 330 22 x 25 15 1.10 1.2 0.603 ELG337M180AQ1(1)
180 225 330 22 x 30 15 1.10 1.2 0.603 ELG337M180AQ2(1)
180 225 390 22 x 30 15 1.30 1.4 0.510 ELG397M180AQ2(1)
180 225 470 22 x 30 15 1.30 1.7 0.423 ELG477M180AQ2(1)
180 225 470 22 x 35 15 1.35 1.7 0.423 ELG477M180AQ3(1)
180 225 560 22 x 40 15 1.50 2.0 0.355 ELG567M180AQ4(1)
180 225 680 22 x 45 15 1.70 2.4 0.293 ELG687M180AQ5(1)
180 225 680 22 x 50 15 1.70 2.4 0.293 ELG687M180AQ6(1)
180 225 820 22 x 50 15 1.95 3.0 0.243 ELG827M180AQ6(1)
180 225 270 25 x 20 15 0.90 1.5 0.737 ELG277M180AR7(1)
180 225 330 25 x 25 15 1.10 1.2 0.603 ELG337M180AR1(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 9

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
180 225 390 25 x 25 15 1.30 1.4 0.510 ELG397M180AR1(1)
180 225 470 25 x 30 15 1.40 1.7 0.423 ELG477M180AR2(1)
180 225 560 25 x 35 15 1.55 2.0 0.355 ELG567M180AR3(1)
180 225 680 25 x 35 15 1.70 2.4 0.293 ELG687M180AR3(1)
180 225 680 25 x 40 15 1.75 2.4 0.293 ELG687M180AR4(1)
180 225 820 25 x 40 15 2.00 3.0 0.243 ELG827M180AR4(1)
180 225 820 25 x 45 15 2.00 3.0 0.243 ELG827M180AR5(1)
180 225 1,000 25 x 45 15 2.20 3.0 0.199 ELG108M180AR5(1)
180 225 1,000 25 x 50 15 2.20 3.0 0.199 ELG108M180AR6(1)
180 225 1,200 25 x 50 15 2.45 3.0 0.166 ELG128M180AR6(1)
180 225 470 30 x 25 15 1.40 1.7 0.423 ELG477M180AS1(1)
180 225 560 30 x 25 15 1.50 2.0 0.355 ELG567M180AS1(1)
180 225 680 30 x 30 15 1.70 2.4 0.293 ELG687M180AS2(1)
180 225 820 30 x 30 15 2.00 3.0 0.243 ELG827M180AS2(1)
180 225 820 30 x 35 15 2.00 3.0 0.243 ELG827M180AS3(1)
180 225 1,000 30 x 35 15 2.25 3.0 0.199 ELG108M180AS3(1)
180 225 1,000 30 x 40 15 2.25 3.0 0.199 ELG108M180AS4(1)
180 225 1,200 30 x 40 15 2.45 3.0 0.166 ELG128M180AS4(1)
180 225 1,200 30 x 45 15 2.50 3.0 0.166 ELG128M180AS5(1)
180 225 1,500 30 x 45 15 2.80 3.0 0.133 ELG158M180AS5(1)
180 225 1,500 30 x 50 15 2.90 3.0 0.133 ELG158M180AS6(1)
180 225 1,800 30 x 50 15 3.30 3.0 0.111 ELG188M180AS6(1)
180 225 680 35 x 25 15 1.70 2.4 0.293 ELG687M180AT1(1)
180 225 820 35 x 25 15 1.90 3.0 0.243 ELG827M180AT1(1)
180 225 1,000 35 x 30 15 2.25 3.0 0.199 ELG108M180AT2(1)
180 225 1,200 35 x 30 15 2.50 3.0 0.166 ELG128M180AT2(1)
180 225 1,200 35 x 35 15 2.50 3.0 0.166 ELG128M180AT3(1)
180 225 1,500 35 x 35 15 2.90 3.0 0.133 ELG158M180AT3(1)
180 225 1,500 35 x 40 15 2.90 3.0 0.133 ELG158M180AT4(1)
180 225 1,800 35 x 50 15 3.30 3.0 0.111 ELG188M180AT6(1)
180 225 2,200 35 x 50 15 3.60 3.0 0.090 ELG228M180AT6(1)
200 250 150 22 x 20 15 0.65 0.9 1.327 ELG157M200AQ7(1)
200 250 180 22 x 20 15 0.70 1.1 1.106 ELG187M200AQ7(1)
200 250 220 22 x 25 15 0.80 0.9 0.905 ELG227M200AQ1(1)
200 250 270 22 x 25 15 0.85 1.1 0.737 ELG277M200AQ1(1)
200 250 330 22 x 30 15 1.20 1.3 0.603 ELG337M200AQ2(1)
200 250 390 22 x 30 15 1.30 1.6 0.510 ELG397M200AQ2(1)
200 250 390 22 x 35 15 1.30 1.6 0.510 ELG397M200AQ3(1)
200 250 470 22 x 35 15 1.40 1.9 0.423 ELG477M200AQ3(1)
200 250 470 22 x 40 15 1.40 1.9 0.423 ELG477M200AQ4(1)
200 250 560 22 x 40 15 1.40 2.2 0.355 ELG567M200AQ4(1)
200 250 560 22 x 45 15 1.55 2.2 0.355 ELG567M200AQ5(1)
200 250 680 22 x 50 15 1.75 2.7 0.293 ELG687M200AQ6(1)
200 250 220 25 x 20 15 0.80 1.3 0.905 ELG227M200AR7(1)
200 250 270 25 x 25 15 0.85 1.1 0.737 ELG277M200AR1(1)
200 250 330 25 x 25 15 1.20 1.3 0.603 ELG337M200AR1(1)
200 250 390 25 x 25 15 1.30 1.6 0.510 ELG397M200AR1(1)
200 250 390 25 x 30 15 1.30 1.6 0.510 ELG397M200AR2(1)
200 250 470 25 x 30 15 1.40 1.9 0.423 ELG477M200AR2(1)
200 250 560 25 x 35 15 1.55 2.2 0.355 ELG567M200AR3(1)
200 250 680 25 x 40 15 1.75 2.7 0.293 ELG687M200AR4(1)
200 250 820 25 x 50 15 2.05 3.0 0.243 ELG827M200AR6(1)
200 250 390 30 x 25 15 1.30 1.6 0.510 ELG397M200AS1(1)
200 250 470 30 x 25 15 1.50 1.9 0.423 ELG477M200AS1(1)
200 250 560 30 x 30 15 1.55 2.2 0.355 ELG567M200AS2(1)
200 250 680 30 x 30 15 1.75 2.7 0.293 ELG687M200AS2(1)
200 250 820 30 x 35 15 2.00 3.0 0.243 ELG827M200AS3(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 10

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
200 250 1,000 30 x 40 15 2.30 3.0 0.199 ELG108M200AS4(1)
200 250 1,200 30 x 45 15 2.30 3.0 0.166 ELG128M200AS5(1)
200 250 1,000 30 x 45 15 2.30 3.0 0.199 ELG108M200AS5(1)
200 250 1,200 30 x 50 15 2.60 3.0 0.166 ELG128M200AS6(1)
200 250 680 35 x 25 15 1.70 2.7 0.293 ELG687M200AT1(1)
200 250 820 35 x 30 15 2.05 3.0 0.243 ELG827M200AT2(1)
200 250 1,000 35 x 30 15 2.30 3.0 0.199 ELG108M200AT2(1)
200 250 1,000 35 x 35 15 2.30 3.0 0.199 ELG108M200AT3(1)
200 250 1,200 35 x 40 15 2.65 3.0 0.166 ELG128M200AT4(1)
200 250 1,500 35 x 45 15 3.10 3.0 0.133 ELG158M200AT5(1)
200 250 1,800 35 x 50 15 3.15 3.0 0.111 ELG188M200AT6(1)
250 300 120 22 x 20 15 0.60 0.9 1.659 ELG127M250AQ7(1)
250 300 150 22 x 25 15 0.65 0.8 1.327 ELG157M250AQ1(1)
250 300 180 22 x 25 15 0.80 0.9 1.106 ELG187M250AQ1(1)
250 300 220 22 x 30 15 0.95 1.1 0.905 ELG227M250AQ2(1)
250 300 270 22 x 35 15 1.15 1.4 0.737 ELG277M250AQ3(1)
250 300 330 22 x 35 15 1.15 1.7 0.603 ELG337M250AQ3(1)
250 300 330 22 x 40 15 1.25 1.7 0.603 ELG337M250AQ4(1)
250 300 390 22 x 45 15 1.50 2.0 0.510 ELG397M250AQ5(1)
250 300 470 22 x 50 15 1.55 2.4 0.423 ELG477M250AQ6(1)
250 300 180 25 x 20 15 0.75 1.4 1.106 ELG187M250AR7(1)
250 300 220 25 x 25 15 0.95 1.1 0.905 ELG227M250AR1(1)
250 300 270 25 x 30 15 1.15 1.4 0.737 ELG277M250AR2(1)
250 300 330 25 x 30 15 1.20 1.7 0.603 ELG337M250AR2(1)
250 300 390 25 x 35 15 1.50 2.0 0.510 ELG397M250AR3(1)
250 300 470 25 x 35 15 1.50 2.4 0.423 ELG477M250AR3(1)
250 300 470 25 x 40 15 1.55 2.4 0.423 ELG477M250AR4(1)
250 300 560 25 x 45 15 1.80 2.8 0.355 ELG567M250AR5(1)
250 300 680 25 x 50 15 1.95 3.0 0.293 ELG687M250AR6(1)
250 300 270 30 x 25 15 1.15 1.4 0.737 ELG277M250AS1(1)
250 300 330 30 x 25 15 1.25 1.7 0.603 ELG337M250AS1(1)
250 300 390 30 x 30 15 1.50 2.0 0.510 ELG397M250AS2(1)
250 300 470 30 x 30 15 1.55 2.4 0.423 ELG477M250AS2(1)
250 300 560 30 x 35 15 1.80 2.8 0.355 ELG567M250AS3(1)
250 300 680 30 x 35 15 2.00 3.0 0.293 ELG687M250AS3(1)
250 300 680 30 x 40 15 2.00 3.0 0.293 ELG687M250AS4(1)
250 300 820 30 x 40 15 2.00 3.0 0.243 ELG827M250AS4(1)
250 300 820 30 x 45 15 2.15 3.0 0.243 ELG827M250AS5(1)
250 300 470 35 x 25 15 1.55 2.4 0.423 ELG477M250AT1(1)
250 300 560 35 x 30 15 1.80 2.8 0.355 ELG567M250AT2(1)
250 300 680 35 x 35 15 2.00 3.0 0.293 ELG687M250AT3(1)
250 300 820 35 x 35 15 2.10 3.0 0.243 ELG827M250AT3(1)
250 300 1,000 35 x 40 15 2.30 3.0 0.199 ELG108M250AT4(1)
250 300 1,200 35 x 45 15 2.80 3.0 0.166 ELG128M250AT5(1)
250 300 1,500 35 x 50 15 3.63 3.0 0.133 ELG158M250AT6(1)
350 400 56 22 x 20 15 0.40 0.6 3.554 ELG566M350AQ7(1)
350 400 68 22 x 25 15 0.45 0.5 2.927 ELG686M350AQ1(1)
350 400 82 22 x 25 15 0.55 0.6 2.427 ELG826M350AQ1(1)
350 400 100 22 x 30 15 0.70 0.7 1.990 ELG107M350AQ2(1)
350 400 120 22 x 35 15 0.75 0.8 1.659 ELG127M350AQ3(1)
350 400 150 22 x 40 15 0.80 1.1 1.327 ELG157M350AQ4(1)
350 400 180 22 x 45 15 0.90 1.3 1.106 ELG187M350AQ5(1)
350 400 220 22 x 50 15 1.05 1.5 0.905 ELG227M350AQ6(1)
350 400 82 25 x 20 15 0.50 0.9 2.427 ELG826M350AR7(1)
350 400 100 25 x 25 15 0.70 0.7 1.990 ELG107M350AR1(1)
350 400 120 25 x 30 15 0.75 0.8 1.659 ELG127M350AR2(1)
350 400 150 25 x 30 15 0.80 1.1 1.327 ELG157M350AR2(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 11

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
350 400 180 25 x 35 15 0.90 1.3 1.106 ELG187M350AR3(1)
350 400 220 25 x 40 15 1.05 1.5 0.905 ELG227M350AR4(1)
350 400 270 25 x 45 15 1.20 1.9 0.737 ELG277M350AR5(1)
350 400 120 30 x 25 15 0.75 0.8 1.659 ELG127M350AS1(1)
350 400 150 30 x 25 15 0.85 1.1 1.327 ELG157M350AS1(1)
350 400 180 30 x 30 15 0.90 1.3 1.106 ELG187M350AS2(1)
350 400 220 30 x 30 15 1.00 1.5 0.905 ELG227M350AS2(1)
350 400 270 30 x 35 15 1.20 1.9 0.737 ELG277M350AS3(1)
350 400 330 30 x 40 15 1.35 2.3 0.603 ELG337M350AS4(1)
350 400 390 30 x 45 15 1.50 2.7 0.510 ELG397M350AS5(1)
350 400 220 35 x 25 15 1.05 1.5 0.905 ELG227M350AT1(1)
350 400 270 35 x 30 15 1.20 1.9 0.737 ELG277M350AT2(1)
350 400 330 35 x 35 15 1.35 2.3 0.603 ELG337M350AT3(1)
350 400 390 35 x 35 15 1.50 2.7 0.510 ELG397M350AT3(1)
350 400 470 35 x 40 15 1.70 3.0 0.423 ELG477M350AT4(1)
350 400 560 35 x 45 15 1.90 3.0 0.355 ELG567M350AT5(1)
400 450 47 22 x 20 15 0.35 0.6 4.235 ELG476M400AQ7(1)
400 450 56 22 x 20 15 0.40 0.7 3.554 ELG566M400AQ7(1)
400 450 68 22 x 25 15 0.50 0.5 2.927 ELG686M400AQ1(1)
400 450 82 22 x 25 15 0.52 0.7 2.427 ELG826M400AQ1(1)
400 450 82 22 x 30 15 0.60 0.7 2.427 ELG826M400AQ2(1)
400 450 100 22 x 30 15 0.60 0.8 1.990 ELG107M400AQ2(1)
400 450 120 22 x 30 15 0.62 1.0 1.659 ELG127M400AQ2(1)
400 450 100 22 x 35 15 0.65 0.8 1.990 ELG107M400AQ3(1)
400 450 120 22 x 35 15 0.70 1.0 1.659 ELG127M400AQ3(1)
400 450 150 22 x 35 15 0.72 1.2 1.327 ELG157M400AQ3(1)
400 450 150 22 x 40 15 0.80 1.2 1.327 ELG157M400AQ4(1)
400 450 180 22 x 40 15 0.81 1.4 1.106 ELG187M400AQ4(1)
400 450 180 22 x 50 15 0.95 1.4 1.106 ELG187M400AQ6(1)
400 450 68 25 x 20 15 0.50 0.8 2.927 ELG686M400AR7(1)
400 450 82 25 x 25 15 0.65 0.7 2.427 ELG826M400AR1(1)
400 450 100 25 x 30 15 0.65 0.8 1.990 ELG107M400AR2(1)
400 450 120 25 x 30 15 0.70 1.0 1.659 ELG127M400AR2(1)
400 450 150 25 x 30 15 0.85 1.2 1.327 ELG157M400AR2(1)
400 450 150 25 x 35 15 0.85 1.2 1.327 ELG157M400AR3(1)
400 450 180 25 x 40 15 0.95 1.4 1.106 ELG187M400AR4(1)
400 450 220 25 x 45 15 1.05 1.8 0.905 ELG227M400AR5(1)
400 450 270 25 x 45 15 1.10 2.2 0.737 ELG277M400AR5(1)
400 450 270 25 x 50 15 1.20 2.2 0.737 ELG277M400AR6(1)
400 450 330 25 x 50 15 1.25 2.6 0.603 ELG337M400AR6(1)
400 450 120 30 x 25 15 0.75 1.0 1.659 ELG127M400AS1(1)
400 450 150 30 x 30 15 0.85 1.2 1.327 ELG157M400AS2(1)
400 450 180 30 x 30 15 0.90 1.4 1.106 ELG187M400AS2(1)
400 450 220 30 x 35 15 1.05 1.8 0.905 ELG227M400AS3(1)
400 450 270 30 x 40 15 1.20 2.2 0.737 ELG277M400AS4(1)
400 450 390 30 x 40 15 1.35 3.0 0.510 ELG397M400AS4(1)
400 450 330 30 x 45 15 1.40 2.6 0.603 ELG337M400AS5(1)
400 450 390 30 x 45 15 1.42 3.0 0.510 ELG397M400AS5(1)
400 450 470 30 x 45 15 1.45 3.0 0.423 ELG477M400AS5(1)
400 450 390 30 x 50 15 1.55 3.0 0.510 ELG397M400AS6(1)
400 450 470 30 x 50 15 1.75 3.0 0.423 ELG477M400AS6(1)
400 450 560 30 x 60 15 1.90 3.0 0.355 ELG567M400AS8(1)
400 450 150 35 x 25 15 0.80 1.2 1.327 ELG157M400AT1(1)
400 450 220 35 x 30 15 1.10 1.8 0.905 ELG227M400AT2(1)
400 450 270 35 x 35 15 1.20 2.2 0.737 ELG277M400AT3(1)
400 450 330 35 x 35 15 1.35 2.6 0.603 ELG337M400AT3(1)
400 450 390 35 x 40 15 1.55 3.0 0.510 ELG397M400AT4(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 12

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
400 450 470 35 x 40 15 1.65 3.0 0.423 ELG477M400AT4(1)
400 450 470 35 x 45 15 1.75 3.0 0.423 ELG477M400AT5(1)
400 450 560 35 x 45 15 1.80 3.0 0.355 ELG567M400AT5(1)
400 450 560 35 x 50 15 1.90 3.0 0.355 ELG567M400AT6(1)
400 450 680 35 x 50 15 2.10 3.0 0.293 ELG687M400AT6(1)
400 450 1,000 35 x 50 15 1.72 3.0 0.199 ELG108M400AT6(1)
400 450 680 35 x 60 15 2.15 3.0 0.293 ELG687M400AT8(1)
420 470 150 22 x 35 20 0.58 1.3 1.769 ELG157M420AQ3(1)
420 470 150 22 x 40 20 0.65 1.3 1.769 ELG157M420AQ4(1)
420 470 180 22 x 40 20 0.68 1.5 1.474 ELG187M420AQ4(1)
420 470 150 25 x 30 20 0.70 1.3 1.769 ELG157M420AR2(1)
420 470 180 25 x 35 20 0.68 1.5 1.474 ELG187M420AR3(1)
420 470 220 25 x 40 20 0.85 1.8 1.206 ELG227M420AR4(1)
420 470 220 25 x 45 20 0.95 1.8 1.206 ELG227M420AR5(1)
420 470 270 25 x 45 20 1.05 2.3 0.983 ELG277M420AQ5(1)
420 470 330 25 x 50 20 1.15 2.8 0.804 ELG337M420AR6(1)
420 470 220 30 x 40 20 0.95 1.8 1.206 ELG227M420AS4(1)
420 470 270 30 x 40 20 1.05 2.3 0.983 ELG277M420AS4(1)
420 470 330 30 x 40 20 1.15 2.8 0.804 ELG337M420AS4(1)
420 470 390 30 x 45 20 1.25 3.0 0.680 ELG397M420AS5(1)
420 470 470 30 x 50 20 1.40 3.0 0.565 ELG477M420AS6(1)
420 470 270 35 x 30 20 1.05 2.3 0.983 ELG277M420AT2(1)
420 470 330 35 x 35 20 1.15 2.8 0.804 ELG337M420AT3(1)
420 470 470 35 x 40 20 1.35 3.0 0.565 ELG477M420AT4(1)
420 470 560 35 x 45 20 1.65 3.0 0.474 ELG567M420AT5(1)
450 500 47 22 x 25 20 0.38 0.4 5.647 ELG476M450AQ1(1)
450 500 56 22 x 25 20 0.40 0.5 4.739 ELG566M450AQ1(1)
450 500 68 22 x 30 20 0.50 0.6 3.903 ELG686M450AQ2(1)
450 500 82 22 x 30 20 0.52 0.7 3.236 ELG826M450AQ2(1)
450 500 100 22 x 30 20 0.55 0.9 2.654 ELG107M450AQ2(1)
450 500 82 22 x 35 20 0.55 0.7 3.236 ELG826M450AQ3(1)
450 500 120 22 x 35 20 0.60 1.1 2.212 ELG127M450AQ3(1)
450 500 100 22 x 40 20 0.65 0.9 2.654 ELG107M450AQ4(1)
450 500 150 22 x 40 20 0.68 1.4 1.769 ELG157M450AQ4(1)
450 500 120 22 x 45 20 0.70 1.1 2.212 ELG127M450AQ5(1)
450 500 180 22 x 45 20 0.75 1.6 1.474 ELG187M450AQ5(1)
450 500 150 22 x 50 20 0.80 1.4 1.769 ELG157M450AQ6(1)
450 500 220 22 x 50 20 0.85 2.0 1.206 ELG227M450AQ6(1)
450 500 68 25 x 25 20 0.50 0.6 3.903 ELG686M450AR1(1)
450 500 82 25 x 30 20 0.55 0.7 3.236 ELG826M450AR2(1)
450 500 100 25 x 30 20 0.60 0.9 2.654 ELG107M450AR2(1)
450 500 120 25 x 35 20 0.70 1.1 2.212 ELG127M450AR3(1)
450 500 150 25 x 40 20 0.80 1.4 1.769 ELG157M450AR4(1)
450 500 180 25 x 45 20 0.85 1.6 1.474 ELG187M450AR5(1)
450 500 220 25 x 50 20 1.00 2.0 1.206 ELG227M450AR6(1)
450 500 270 25 x 50 20 1.05 2.4 0.983 ELG277M450AQ6(1)
450 500 82 30 x 25 20 0.55 0.7 3.236 ELG826M450AS1(1)
450 500 100 30 x 25 20 0.65 0.9 2.654 ELG107M450AS1(1)
450 500 120 30 x 30 20 0.70 1.1 2.212 ELG127M450AS2(1)
450 500 150 30 x 30 20 0.75 1.4 1.769 ELG157M450AS2(1)
450 500 180 30 x 35 20 0.85 1.6 1.474 ELG187M450AS3(1)
450 500 220 30 x 40 20 1.00 2.0 1.206 ELG227M450AS4(1)
450 500 270 30 x 45 20 1.15 2.4 0.983 ELG277M450AS5(1)
450 500 330 30 x 45 20 1.25 3.0 0.804 ELG337M450AS5(1)
450 500 330 30 x 50 20 1.40 3.0 0.804 ELG337M450AS6(1)
450 500 390 30 x 50 20 1.40 3.0 0.680 ELG397M450AS6(1)
450 500 120 35 x 25 20 0.70 1.1 2.212 ELG127M450AT1(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 13

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Table 1 – Ratings & Part Number Reference cont.

Rated Surge Rated Case

DF RC LC ESR Part Number
Voltage Voltage Capacitance Size
120 Hz 20°C DxL 120 Hz 20°C 120 Hz 20°C 5 minutes 120 Hz ( ) Represents
(VDC) (VDC)
(µF) (mm) (tanδ %)* 105°C (A) (mA) 20°C (Ω) Part Number Options
450 500 150 35 x 25 20 0.75 1.4 1.769 ELG157M450AT1(1)
450 500 180 35 x 30 20 0.85 1.6 1.474 ELG187M450AT2(1)
450 500 220 35 x 30 20 1.00 2.0 1.206 ELG227M450AT2(1)
450 500 270 35 x 35 20 1.15 2.4 0.983 ELG277M450AT3(1)
450 500 330 35 x 40 20 1.40 3.0 0.804 ELG337M450AT4(1)
450 500 390 35 x 45 20 1.55 3.0 0.680 ELG397M450AT5(1)
450 500 470 35 x 45 20 1.68 3.0 0.565 ELG477M450AT5(1)
450 500 470 35 x 50 20 1.70 3.0 0.565 ELG477M450AT6(1)
450 500 560 35 x 50 20 1.80 3.0 0.474 ELG567M450AT6(1)
450 500 560 35 x 60 20 2.10 3.0 0.474 ELG567M450AT8(1)
500 550 47 22 x 25 25 0.51 0.5 7.058 ELG476M500AQ1(1)
500 550 56 22 x 30 25 0.58 0.6 5.924 ELG566M500AQ2(1)
500 550 82 22 x 35 25 0.72 0.8 4.046 ELG826M500AQ3(1)
500 550 100 22 x 45 25 0.83 1.0 3.317 ELG107M500AQ5(1)
500 550 120 22 x 50 25 0.93 1.2 2.765 ELG127M500AQ6(1)
500 550 68 25 x 25 25 0.65 0.7 4.879 ELG686M500AR1(1)
500 550 82 25 x 30 25 0.74 0.8 4.046 ELG826M500AR2(1)
500 550 120 25 x 35 25 0.93 1.2 2.765 ELG127M500AR3(1)
500 550 150 25 x 45 25 1.08 1.5 2.212 ELG157M500AS5(1)
500 550 180 25 x 50 25 1.20 1.8 1.843 ELG187M500AR6(1)
500 550 100 30 x 25 25 0.82 1.0 3.317 ELG107M500AS1(1)
500 550 120 30 x 30 25 0.91 1.2 2.765 ELG127M500AS2(1)
500 550 150 30 x 35 25 1.04 1.5 2.212 ELG157M500AS3(1)
500 550 180 30 x 40 25 1.17 1.8 1.843 ELG187M500AS4(1)
500 550 220 30 x 45 25 1.33 2.2 1.508 ELG227M500AS5(1)
500 550 270 30 x 50 25 1.50 2.7 1.229 ELG277M500AS6(1)
500 550 150 35 x 25 25 0.99 1.5 2.212 ELG157M500AT1(1)
500 550 180 35 x 30 25 1.10 1.8 1.843 ELG187M500AT2(1)
500 550 220 35 x 35 25 1.23 2.2 1.508 ELG227M500AT3(1)
500 550 270 35 x 40 25 1.42 2.7 1.229 ELG277M500AT4(1)
500 550 330 35 x 45 25 1.60 3.0 1.005 ELG337M500AT5(1)
500 550 390 35 x 50 25 1.78 3.0 0.851 ELG397M500AT6(1)
500 550 470 35 x 60 25 2.03 3.0 0.706 ELG477M500AT8(1)
Rated Surge Rated Case Part
DF RC LC ESR
Voltage Voltage Capacitance Size Number

(1) Insert packaging code. See Ordering Options Table for available options.
* When capacitance exceeds 1,000 µF, the DF value (%) is increased by 2% for every additional 1,000 µF.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 14

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Mounting Positions (Safety Vent)

In operation, electrolytic capacitors will always conduct a leakage current, which causes electrolysis. The oxygen produced
by electrolysis will regenerate the dielectric layer but, at the same time, the hydrogen released may cause the internal
pressure of the capacitor to increase. The overpressure vent, or safety vent, ensures that the gas can escape when the
pressure reaches a certain value. All mounting positions must allow the safety vent to work properly.

Installing
• As a general principle, lower-use temperatures result in a longer, useful life of the capacitor. For this reason, it should be
ensured that electrolytic capacitors are placed away from heat-emitting components. Adequate space should be allowed
between components for cooling air to circulate, particularly when high ripple current loads are applied. In any case, the
maximum category temperature must not be exceeded.
• Do not deform the case of the capacitors or use capacitors with a deformed case.
• Verify that the connections of the capacitors are able to insert on the board without excessive mechanical force.
• If the capacitors require mounting through additional means, the recommended mounting accessories shall be used.
• Verify the correct polarization of the capacitor on the board.
• Verify that the space around the pressure relief device is according to the following guideline:

Case Diameter Space Around Safety Vent

≤ 16 mm > 2 mm

> 16 to ≤ 40 mm > 3 mm

> 40 mm > 5 mm

It is recommended that capacitors always be mounted with the safety device uppermost or in the upper part of the capacitor.
• If the capacitors are stored for a long time, the leakage current must be verified. If the leakage current is superior to the
value listed in this catalog, the capacitors must be reformed. In this case, they can be reformed by application of the rated
voltage through a series resistor approximately 1 kΩ for capacitors with VR ≤ 160 V (5 W resistor) and 10 kΩ for the other
rated voltages.
• In the case of capacitors connected in a series, a suitable voltage sharing must be used.
In the case of balancing resistors, the approximate resistance value can be calculated as: R = 60/C.

KEMET recommends, nevertheless, to ensure that the voltage across each capacitor does not exceed its rated voltage.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 15

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Application & Operation Guidelines

Electrical Ratings:
Capacitance (ESC)

Simplified equivalent circuit diagram of an electrolytic capacitor

The capacitive component of the equivalent series circuit, (equivalent series capacitance - ESC), is determined by applying
an alternate voltage of ≤ 0.5 V at a frequency of 120 or 100 Hz and 20°C (IEC 384-1, 384-4).

Temperature Dependence of the Capacitance

Capacitance of an electrolytic capacitor depends upon temperature: with decreasing temperature the viscosity of the
electrolyte increases, thereby reducing its conductivity.
Capacitance will decrease if temperature decreases. Furthermore, temperature drifts cause armature dilatation and,
therefore, capacitance changes (up to 20% depending on the series considered, from 0 to 80°C). This phenomenon is more
evident for electrolytic capacitors than for other types.

Frequency Dependence of the Capacitance

Effective capacitance value is derived from the impedance curve, as long as impedance is still in the range where the
capacitance component is dominant.

1 C = capacitance (F)
C=
2π fZ f = frequency (Hz)
Z = impedance (Ω)

Dissipation Factor tan δ (DF)

Dissipation Factor tan δ is the ratio between the active and reactive power for a sinusoidal waveform voltage. It can be
thought of as a measurement of the gap between an actual and ideal capacitor.

reactive

ideal δ
actual

active
Tan δ is measured with the same set-up used for the series capacitance ESC.
Tan δ = ω x ESC x ESR where:
ESC = Equivalent series capacitance
ESR = Equivalent series resistance

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 16

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Application & Operation Guidelines cont.

Equivalent Series Inductance (ESL)
Equivalent series inductance or self inductance results from the terminal configuration and internal design of the capacitor.

Capacitor Equivalent Internal Circuit

Equivalent Equivalent Equivalent

Series Series Series
Capacitance Resistance Inductance
(ESC) (ESR) (ESL)

Co Re L

Equivalent Series Resistance (ESR)

Equivalent series resistance is the resistive component of the equivalent series circuit. ESR value depends on frequency and
temperature, and is related to the tan δ by the following equation:
Ce
ESR = Equivalent series resistance (Ω)
tan δ tan δ = Dissipation factor
ESR =
2πf ESC ESC = Equivalent series capacitance (F)
f = Frequency (Hz)

Tolerance limits of the rated capacitance must be taken into account when calculating this value.

Impedance (Z)
Impedance of an electrolytic capacitor results from a circuit formed by the following individual equivalent series
components:

Co Re L

Ce
Co = Aluminum oxide capacitance (surface and thickness of the dielectric.)
Re = Resistance of electrolyte and paper mixture (other resistances not depending on the frequency are not considered: tabs,
plates, etc.)
Ce = Electrolyte soaked paper capacitance.
L = Inductive reactance of the capacitor winding and terminals.
Impedance of an electrolytic capacitor is not a constant quantity that retains its value under all conditions; it changes
depending on frequency and temperature.
Impedance as a function of frequency (sinusoidal waveform) for a certain temperature can be represented as follows:

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 17

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Application & Operation Guidelines cont.

Impedance (Z) cont.
Z [ohm ]
1,000

100
ω Ce
1/ω
10 B
Re ωL
A
1
1/ω
ω Co
C
0.1
0.1 1 10 100 1,000 10,000
F [K Hz]
• Capacitive reactance predominates at low frequencies.
• With increasing frequency, capacitive reactance Xc = 1/ωCo decreases until it reaches the order of magnitude of
electrolyte resistance Re(A)
• At even higher frequencies, resistance of the electrolyte predominates: Z = Re (A - B)
• When the capacitor’s resonance frequency is reached (ω0), capacitive and inductive reactance mutually cancel each other
1/ωCe = ωL, ω0 = 1/SQR(LCe)
• Above this frequency, inductive reactance of the winding and its terminals (XL = Z = ωL) becomes effective and leads to
an increase in impedance
Generally speaking, it can be estimated that Ce ≈ 0.01 Co.

Impedance as a function of frequency (sinusoidal waveform) for different temperature values can be represented as follows
(typical values):

Z (ohm)
10 µF
1,000

100
-40°C

10 20°C
85°C
1

0.1
0.1 1 10 100 1,000 10,000
F (K H z)
Re is the most temperature-dependent component of an electrolytic capacitor equivalent circuit. Electrolyte resistivity will
decrease if temperature rises.
In order to obtain a low impedance value throughout the temperature range, Re must be as little as possible. However, Re
values that are too low indicate a very aggressive electrolyte, resulting in a shorter life of the electrolytic capacitor at high
temperatures. A compromise must be reached.
© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 18
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Application & Operation Guidelines cont.

Leakage Current (LC)
Due to the aluminum oxide layer that serves as a dielectric, a small current will continue to flow even after a DC voltage has
been applied for long periods. This current is called leakage current.

A high leakage current flows after applying voltage to the capacitor then decreases in a few minutes, for example, after
prolonged storage without any applied voltage. In the course of continuous operation, the leakage current will decrease and
reach an almost constant value.

After a voltage-free storage the oxide layer may deteriorate, especially at a high temperature. Since there are no leakage
currents to transport oxygen ions to the anode, the oxide layer is not regenerated. The result is that a higher than normal
leakage current will flow when voltage is applied after prolonged storage.

As the oxide layer is regenerated in use, the leakage current will gradually decrease to its normal level.
The relationship between the leakage current and voltage applied at constant temperature can be shown schematically as
follows:

VR VS VF V

Where:
VF = Forming voltage
If this level is exceeded, a large quantity of heat and gas will be generated and the capacitor could be damaged.
VR = Rated voltage
This level represents the top of the linear part of the curve.
VS = Surge voltage
This lies between VR and VF. The capacitor can be subjected to VS for short periods only.

Electrolytic capacitors are subjected to a reforming process before acceptance testing. The purpose of this preconditioning
is to ensure that the same initial conditions are maintained when comparing different products.

Ripple Current (RC)

The maximum ripple current value depends on:
• Ambient temperature
• Surface area of the capacitor (heat dissipation area)
tan δ or ESR
• Frequency
The capacitor’s life depends on the thermal stress.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 19

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Application & Operation Guidelines cont.

Frequency Dependence of the Ripple Current
ESR and, thus, the tan δ depend on the frequency of the applied voltage. This indicates that the allowed ripple current is also
a function of the frequency.

Temperature Dependence of the Ripple Current

The data sheet specifies maximum ripple current at the upper category temperature for each capacitor.

Expected Life Calculation

Expected life depends on operating temperature according to the following formula: L = Lo x 2(To-T)/10
Where:
L: Expected life
Lo: Load life at a maximum permissible operating
temperature
T: Actual operating temperature
To: Maximum permissible operating temperature

This formula is applicable between 40°C and To.

Expected Life Calculation Chart

Actual Operating Temperature (C°)

Expected life (h)

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 20

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Packaging Quantities

Bulk
Diameter Length
Size Code Standard
(mm) (mm)
Leads
Q7 22 20 400
Q1 22 25 400
Q2 22 30 400
Q3 22 35 400
Q4 22 40 400
Q5 22 45 400
Q6 22 50 400
R7 25 20 200
R1 25 25 200
R2 25 30 200
R3 25 35 200
R4 25 40 200
R5 25 45 200
R6 25 50 200
S1 30 25 200
S2 30 30 200
S3 30 35 200
S4 30 40 200
S5 30 45 200
S6 30 50 200
S8 30 60 200
T1 35 25 200
T2 35 30 200
T3 35 35 200
T4 35 40 200
T5 35 45 200
T6 35 50 200
T8 35 60 200

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 21

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Marking

Polarity Stripe (−)

KEMET logo
Series Identification
Rated Temperature
Manufacturing
Internal Codes

Rated Voltage (VDC)

Capacitance µF
Date Code
Month*/Year*

*Image for reference only. A slight change in the layout can occur, not affecting the marking content.
This change will not impact the product's form, fit, or function, as the products remain equivalent in
physical, mechanical, quality, and reliability characteristics.

*Y = Year
Code 19 20 21 22 23 24 25 26 27
Year 2019 2020 2021 2022 2023 2024 2025 2026 2027

*M = Month
Code 01 02 03 04 05 06 07 08 09 10 11 12
Month 1 2 3 4 5 6 7 8 9 10 11 12

Construction
Detailed Cross Section
Insulating End Disc Termination Pin
Rubber Seal
Insulating Sleeve Aluminum Can Laser Welded
with Safety Vent Terminal Tab

Laser Welded Margin

Terminal Tabs
Aluminum Can

Insulating Sleeve

Polarity Stripe (−)

Rubber Seal
Paper Spacer Impregnated
with Electrolyte
(First Layer) Termination Pin (+)

Cathode Aluminum Foil,

Etched (Second Layer) Termination Pin (−)
Paper Spacer Impregnated Anode Aluminum Foil, Etched,
with Electrolyte Covered with Aluminum Oxide
(Third Layer) (Fourth Layer)

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 22

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

Construction Data
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and then
“formed” to produce the aluminum oxide layer. Both the anode and Extended cathode
cathode foils are then interleaved with absorbent paper and wound
into a cylinder. During the winding process, aluminum tabs are Anode foil
attached to each foil to provide the electrical contact.

The deck, complete with terminals, is attached to the tabs and then Foil tabs
folded down to rest on top of the winding. The complete winding
is impregnated with electrolyte before being housed in a suitable
container, usually an aluminum can, and sealed. Throughout the
Tissues
process, all materials inside the housing must be maintained at the
highest purity and be compatible with the electrolyte. Cathode foil

Each capacitor is aged and tested before being sleeved and packed.
The purpose of aging is to repair any damage in the oxide layer Etching
and thus reduce the leakage current to a very low level. Aging is
normally carried out at the rated temperature of the capacitor and
Forming
is accomplished by applying voltage to the device while carefully
controlling the supply current. The process may take several hours to
complete. Winding

Damage to the oxide layer can occur due to variety of reasons:

Decking
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding Impregnation

A sample from each batch is taken by the quality department after

completion of the production process. This sample size is controlled Assembly
by the use of recognized sampling tables defined in BS 6001.
Aging
The following tests are applied and may be varied at the request
of the customer. In this case the batch, or special procedure, will
determine the course of action. Testing

Electrical: Mechanical/Visual:
• Leakage current • Overall dimensions Sleeving
• Capacitance • Torque test of mounting stud
• ESR • Print detail
Packing
• Impedance • Box labels
• Tan Delta • Packaging, including packed
quantity

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 23

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Snap-In Aluminum Electrolytic Capacitors – ELG, +105°C

KEMET Electronics Corporation Sales Offices

For a complete list of our global sales offices, please visit www.kemet.com/sales.

Disclaimer
YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.

All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other
measures may not be required.

KEMET requires its products to be packaged and shipped on pallets. This is because KEMET’s products are specifically designed to be packed onto pallets during
shipment. If for any reason, the products are removed from pallets by the shipping party and shipped to the end customer, then additional external protection is
required. In this instance, an external box with two carton layers and an upwards orientation sticker must be used by the shipping party, with the empty space filled
with filling material, and afterwards sealing the box. If this packing and packaging guideline is not followed by the shipping party, the shipping party, and not KEMET,
will be held responsible for any packaging, packing and/or product damages upon delivery of the products to the end customer. KEMET hereby disclaims any liability
for damages to the products or otherwise that have been, or threaten to be, inflicted, result from or are in any way related to the packaging, packing or damage by the
shipping party in contravention of the packing and packaging guidelines herein.

KEMET is a registered trademark of KEMET Electronics Corporation.

© KEMET Electronics Corporation • One East Broward Boulevard A4021_ELG • 3/20/2025 24

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com