Technical Data Sheet

Product Name: Phenol Formaldehyde Range of Stoving Type QX

Lacquers

Grades 22%, 30% & 39% - to Def Stan 80-92

Product Number: - Clear

o 22% - 27520 (previously 18669)
o 30% - 27521 (previously 18668)
o 39% - 18670

- Red
o 22% - 27523 (previously 18679)
o 30% - 27524 (previously 18683)

- Yellow
o 39% - 27531

- Green
o 30% - 26740

Product Description: Stoving lacquer for brass, aluminium and steel inside shells in direct
contact with expolsives. Phenol Formaldehyde lacquer for
application to suitable prepared metal substrates. The lacquer
provides a corrosion resistant finish against salt water spray. The
three lacquers being differentiated by the non-volatile content, 22%,
30% and 39%. Designation QX indicates that thematerial is a
quality likely to be suitable for application to a high degree of
compatibility with explosives is a requirement and it can be titned
black, red, yellow, reen or clear for identification purposes.

As a replacement for L3128, it has been used by such customers as

Rolls Royce and Smiths Industries, in applications like VC10 fuel
tanks.

Approvals/Specifications: - Conforms to Defence Standard 80-92, Issue 2, previously CS

2465

- Previously CS 2465

- MIL L6806 approved for use on the G222 Italian Aircraft

- Manufactured with a resin replacement for Bakelite L-3128

- NSN 8010-99-587-3774

Indestructible Paint Ltd, 16-25 Pentos Drive, Sparkhill, Birmingham B11 3TA
Tel: +44(0)121 702 2485, Fax: +44 (0)121 778 4338, E-Mail: [email protected], Web: www.indestructible.co.uk
Registered in England: 1376995
Technical Data Sheet

Performance: The product conforms to Def Stan 80-92, Issue 2, which includes
the following:

- Resistance to salt spray BS3900, Part F4 for 10 days

- Resistance to water BS3900, ANX D
- Resistance to nitro-benzene – ANX D no loss
- Resistance to bend test – around 10mm mandrel
- PH of aqueous extract 6.5±1.5
- Coloured products contain less than 1% of approved dye
- Resists acetone to BS509

Components: Single Pack Product. Do Not Thin.

Application:

Surface Preparation: Ensure all surfaces are clean and free from dirt

Paint Preparation: Use as supplied

Application Method: Can be applied by spraying or dip (brush on small areas). Use at
supply viscosity; do not thin. Solids content defines final dry film
thickness.

Drying Curing: Flash off: 20-30 minutes

Stove: 30 minutes @ 135°C (275°F)

Technical Properties: Supply Viscosity: Ready for Use

Flash Point: -

VOC Content: -

Colour: See List

Pack Size: 5 Litres

Density: -

Gloss: Full Gloss

Thinner: 18662

Solvent/Clean Up: 18662

Indestructible Paint Ltd, 16-25 Pentos Drive, Sparkhill, Birmingham B11 3TA
Tel: +44(0)121 702 2485, Fax: +44 (0)121 778 4338, E-Mail: [email protected], Web: www.indestructible.co.uk
Registered in England: 1376995
Technical Data Sheet

Catalyst: N/A

Theoretical Coverage: -

Storage: Highly flammable liquid: store and use in accordance with the
flammable liquid regulations

Shelf Life: 12 months temperate; 6 months tropical

Before use, refer to Product Safety Data Sheet

Disclaimer: The information printed in this publication is based upon the research and experience of
Indestructible Paint Ltd. No representation of warranty is made, however, concerning the
accuracy or completeness of the information presented in this publication. Indestructible
Paint Ltd make no warranty or representation of any kind, express or implied. Including
without information limitation any warranty or merchantability or fitness for any particular
purpose, and no warranty or representation shall be implied by law or otherwise. Any
products sold by Indestructible Paint Ltd are not warranted as suitable for any particular
purpose to the buyer. The suitability of any products for any purpose in particular to the
buyer is for the buyer to determine. Indestructible Paint Ltd assumes no responsibility for
the selection of products suitable to the particular purpose of any particular buyer.
Indestructible Paint Ltd shall in no event be liable for any special, incidental or
consequential damages.

Safety Data Sheets: For Safety Data Sheets please contact our Sales Department:

Tel: +44(0)121 702 2485

Email: [email protected]

Indestructible Paint Ltd, 16-25 Pentos Drive, Sparkhill, Birmingham B11 3TA
Tel: +44(0)121 702 2485, Fax: +44 (0)121 778 4338, E-Mail: [email protected], Web: www.indestructible.co.uk
Registered in England: 1376995