Dr.
Fixit Plaster Master
WATERPROOFING
LIQUID PLASTICIZING & WATERPROOFING COMPOUND
Description
Dr. Fixit Plaster Master is specially formulated integral liquid waterproofing compound composed of surface
active plasticizing agents, polymer & additives specially formulated for use in Plastering. It is used as admixture
for site-mixed cement mortar & plastering. It makes mortar mix cohesive and prevent segregation & facilitates
excellent retention of workability. In addition, to lower water cement ratio it eliminates shrinkage cracks in mortar.
W013 Dr. Fixit Plaster Master
Areas of Application
} Internal Plastering, External plastering, Ceiling Plastering, Roof screeds, Bathroom screeds
} Waterproofing of cement sand mortars
Features & Benefits
} Compatibility – Compatible with all cements, sand types (M Sand, River sand, Recycled sand).
} High Quality fresh mix – Imparts high degree of cohesiveness without segregation and bleeding in plasters,
mortars and screeds.
} Offers Extended workability – No additional or very less water required for mix to remain workable.
} Develops wet grabs to the substrate, no or minimum rebound loss.
} Facilitates placement, levelling and finishing of plaster, screed, both vertical and on the floor.
} Significant reduction in shrinkage therefore no /insignificant cracks.
} Significant reduction in water permeability.
} Overall offers higher durability.
Method of Application
} Charge cement & aggregates to mixer as per the mix design, mix in dry state for 1–2 minutes.
} Start addition of 75–80% mixing water & mix for 2-3 minutes.
} Dr. Fixit Plaster Master is added as per the recommended dosage into the remaining mixing / gauging water,
then add to mixer & mix for another 2 minutes.
} Apply plaster, as needed.
} Cure the applied mortar as per good construction practices.
Precautions & Limitations
} Shake well before use
} Do not add Dr. Fixit Plaster Master directly to dry cement & aggregate mix.
} Maintain water-cement ratio as low as possible.
} Do not increase the dosage of Dr. Fixit Plaster Master than the recommendation.
Technical Information
PROPERTIES TYPICAL VALUES TEST METHOD
Appearance Clear to slight turbid liquid
Specific gravity 1.04 - 1.09
pH Value 11 - 14
Compressive strength N/mm 2
IS: 2645: 2003 As per the standard
Water permeability IS: 2645: 2003 Passes
535
W013 PLASTER MASTER-12/05/22
WATERPROOFING
Dosage
200 ml per 50 kg bag of cement
Packaging
1, 5, 10, 20 Liters
W013 Dr. Fixit Plaster Master
Shelf Life
Shelf life is 24 months from the date of manufacturing. Store in a cool & dry place in unopened condition.
Health and Safety
} Use rubber hand gloves & safety goggles, while using Dr. Fixit Plaster Master
} In case of contact with skin, wash with plenty of water.
} Keep out of reach of children
Other Products Categories available
Dr. Fixit brings you the widest range of Construction Chemicals
Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
& its agents has been provided in good faith & meant to serve only as a general
Construction Chemicals Division
guideline during usage. Users are advised to carry out tests & take trials to ensure on
Ramkrishna Mandir Road, Post Box No. 17411 the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 • Fax +91-22-2835 7008 used and the on-site workmanship are factors beyond our control, there are no
expressed or implied guarantee / warranty as to the results obtained. The company
www.drfixit.co.in • [email protected]
536
does not assume any liability or consequential damage for unsatisfactory results,
Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504 arising from the use of our products.
