Datasheet
Initiation Transponder 6 (IT 6)
Initiation Transponder 6 (IT 6) Configurable off deck delays and
Key features
has been designed for use with seabed timeouts means fixed
non-electric (NONEL) 3 mm arming and firing windows can also • MF frequency band utilising
shock tube to enable be set. Sonardyne Wideband 2 secure
underwater mine neutralisers communications protocols
to be efficiently, securely and The internal circuitry of IT 6 also
wirelessly initiated from a safe means that no power is applied to • 262,144 Unique Identifier
distance. the independent detonation combinations available to arm
circuitry until the operator chooses and initiate
Based on Sonardyne’s field-proven to fire/initiate the NONEL output • Rugged, compact, lightweight;
Wideband 2 digital signal from the IT 6. can be deployed by diver or ROV
technology, which offers a reliable
and long-range underwater IT 6’s clear 300 m-rated housing • 300 m depth rated
wireless communications link, IT 6 allows an EOD technician to view
the unit’s three status LEDs to view • Safety time-based lockouts
is as reliable and as secure as
traditional methods involving the current state of the • Independent circuits for core
surface RF links and a lot safer transponder and thus its safety. A acoustics and firing circuit
than electrical detonation lines. magnetic “remove before use” pin
gives the IT 6 a long shelf life and • Status LEDs visible through clear
Applications for IT 6 can be found can be powered down completely housing
within offshore energy use and when not in use. • Hydrostatic switch on
defence in support of both high and independent circuit
low order Explosive Ordnance IT 6 is commanded using
Disposal (EOD), Unexploded Sonarydne’s Deck Topside and • Integrated inclinometer
Ordnance (UXO), Mine Counter cabled Nano dunker. This has
• Magnetic on/off switch
Measures (MCM) and demolition additional safety features such as
operations. software lockouts and a simple, • Storage mode eliminates power
easy to follow workflow during consumption when not in use
Safety and simplicity are key with which IT 6 status, range and
• Mounting point for attaching to
the IT 6 and it features several arming/initiating commands can be
seabed
fixed and configurable safety sent.
features. • Long battery shelf life when
Two physical buttons require the stored
A digital hydrostatic switch means operator to hold one button to arm,
the IT 6 cannot be put into an then simultaneously press the
armed state when shallower than other to initiate. IT 6 can also be
the fixed hydrostatic switch depth. tracked with a Sonardyne Ranger 2
If recovered back to deck, IT 6 will USBL systems; however, it can
also render itself impossible to arm only be configured and initiated
when it goes below the minimum using the Deck Topside.
allowed depth.
Specifications
Initiation Transponder 6 (IT 6)
Feature Type 8373
Depth rating 300 m
Operating frequency MF (23-31 kHz)
Transducer beam shape Hemispherical
Transmit source level (dB re 1 µPa @1 m) 184 dB
Operating range 1
>1000 m
Hydrostatic switch 0 m, 2 m and 8 m options available
Subsea status indicators LEDs and acoustic communication
Shock tube outer diameter accepted 3 mm
Operational battery life (alkaline)2 >45 days in not ready to arm state
>22.5 days in ready to arm state
Storage battery life >3 years
Repeat firings with firing pin >10 3
Mechanical construction Acetal
Operating temperature -20 to 55ºC
Storage temperature -20 to 55ºC
Maximum dimensions (length x diameter) 357 x 55 mm
Weight in air/water 0.85 kg / 0.10 kg
Export status Controlled under PL8001.a.3
Standards UKCA
Options Part number
Shallow Water Deck Kit, Release + Initiation 602-0203
Mid Water Deck Kit, Release + Initiation 602-0226
Deck Topside Spare, Release + Initiation 620-0717
0 m Hydrostatic Switch 8373-0711-00
2 m Hydrostatic Switch 8373-0711-02
8 m Hydrostatic Switch 8373-0711-08
Hydrostatic Deck Pressure Test Kit 650-0228
IT-6 Buoyancy Flotation Kit 870-0022
1
In optimal acoustic conditions, range may vary based on noise and reverberation.
2
Due to high voltage circuitry, IT 6 transponders must be sent back to Sonardyne for battery change. Estimated battery life pending
long term data.
3
Firing pins have been proven to in excess of 30 initiations but are recommended to be replaced after 10.
Specifications subject to change without notice – 05/2023
For further information, contact us at E [email protected]
