YMMS: 2012 Land Rover Range Rover Evoque Dynamic Jul 9, 2025

Engine: 2.0L Eng License:

ENGINE - GTDI 2.0L PETROL > SPECIFICATIONS > TORQUE SPECIFICATIONS

DESCRIPTION NM LB-FT

Engine upper support insulator bolts 80 59

Accessory drive overarm idler assembly bolt 25 18

Accessory drive belt idler pulley(s) bolt(s) 47 35

Accessory drive belt tensioner bolt 47 35

Camshaft timing chain front cover bolts ((2))

M6(1) 10 7

M10(1) 48 35

Camshaft Sprocket bolts 72 53

Camshaft position sensor 6 4

Camshaft timing chain tensioner bolts 10 7

Camshaft variable timing valve retaining bolts 10 7

Camshaft auxillary drive adapter 62 46

Camshaft bearing cap bolts ((2))

Stage 1 7 5

Stage 2 15 11

Crankshaft pulley bolt:

Stage 1 100 74

Stage 2 90° 90°

Crankshaft rear seal retainer plate bolts ((2)) 10 7

Crankshaft timing sensor bolts 6 4

Cylinder head bolts ((2))

Stage 1 7 5

Stage 2 15 11

Stage 3 55 40
Stage 4 90° 90°

Stage 5 90° 90°

Coolant thermostat housing bolts 10 7

Coolant outlet housing bolts 10 7

Engine insulator cover bolts 10 7

Engine mount bracket LH:

M10 Bolts 48 35

M10 Engine mount Nuts 48 35

Engine mount bracket RH:

M10 Bolts 48 35

M10 Engine mount Nuts 48 35

Flywheel bolts (manual transmission) ((2))

Stage 1 50 37

Stage 2 80 59

Stage 3 112 83

Driveplate bolts (automatic transmission) ((2)) 112 83

Spark plugs 12 9

Coil on plug retaining bolt 8 6

Spark knock sensor bolt 20 15

Fuel injector rail bolts ((2))

Stage 1 7 5

Stage 2 26° 26°

High pressure fuel pump housing to cylinder head bolts 20 15

High pressure fuel pump bolts

Stage 1 5 4

Stage 2 45° 45°

High pressure fuel line unions

Stage 1 15 11

Stage 2 30° 30°

High pressure fuel line retaining bolt 10 7

High pressure fuel pump shield M8 bolts ((2)) 25 18

High pressure fuel pump shield M6 bolts ((2)) 10 7

Intake manifold bolts ((2)) 20 15

Throttle body bolts 8 6

Manifold absolute pressure sensor bolts 5 4

Oil filter

Stage 1 8 6

Stage 2 180° 180°

Oil pressure sensor 15 11

Oil filter/cooler housing bolts 25 18

Oil cooler bolt

Stage 1 22 16

Stage 2 75° 75°

Stage 3 15° 15°

Oil pan drain plug 26 19

Cylinder head oil gallery plug 20 15

Oil pan bolts ((2)) 20 15

Oil pump sprocket bolt 25 18

Oil pick up screen bolts 10 7

Oil pump bolts:

Stage 1 10 7

Stage 2 20 15

Oil level sensor 10 7

Piston cooling jet bolt 10 7

Timing chain tensioner bolts 10 7

Timing chain guide bolts 10 7

Lower timing chain tensioner bolt 10 7

Lower timing chain guide bolts 10 7

Crankcase vent oil separator housing bolts 10 7

Valve cover bolts ((2)) 10 7

Vacuum pump bolts 10 7

Turbocharger oil drain pipe 10 7

Turbocharger water outlet pipe banjo bolt 28 21

Turbocharger water outlet pipe retaining bolt. 10 7

Turbocharger/Exhaust manifold to cylinder head nuts ((2)) 37 27

Turbocharger heat shield bolts 10 7

Turbocharger water inlet pipe banjo bolts. 28 21

(1)
New nuts/bolts must be installed.
(2)
Refer to procedure for correct torque sequence