Setting crash behaviors: logOnCrash

[06:50:09.0275-GMT]{3>6} CHECKPOINT NOTICE: Image4 device: AP nonce clearable

entering ramrod_clear_ap_nonce
[06:50:09.0287-GMT]{3>6} CHECKPOINT NOTICE: AP nonce consumed
[06:50:09.0287-GMT]{3>6} CHECKPOINT NOTICE: Pre-existing NVRAM variable: auto-
boot=false
[06:50:09.0287-GMT]{3>6} CHECKPOINT NOTICE: Pre-existing NVRAM variable: restore-
outcome=initial_monitor_no_return
[06:50:09.0287-GMT]{3>6} CHECKPOINT PROGRESS: START (unknown) ->
(initial_engine_no_return)
[06:50:09.0287-GMT]{3>6} CHECKPOINT NOTICE: NVRAM access available on initial check
restore-outcome = initial_engine_no_return
[06:50:09.0288-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0400] umask
restore-step-ids = {0x11030400:1}
restore-step-names = {0x11030400:umask}
restore-step-uptime = 1
restore-step-user-progress = -1
[06:50:09.0288-GMT]{3>6} CHECKPOINT END: MAIN:[0x0400] umask
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = -1
Considering saving tolerated failures: false (null) false
[06:50:09.0288-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0402] setvbuf
restore-step-ids = {0x11030402:2}
restore-step-names = {0x11030402:setvbuf}
restore-step-uptime = 1
restore-step-user-progress = -1
[06:50:09.0288-GMT]{3>6} CHECKPOINT END: MAIN:[0x0402] setvbuf
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = -1
Considering saving tolerated failures: false (null) false
[06:50:09.0288-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0406] set_progress_0
restore-step-ids = {0x11030406:3}
restore-step-names = {0x11030406:set_progress_0}
restore-step-uptime = 1
restore-step-user-progress = -1
found display: primary
Will use display primary
Display state is 1
display-boot-rotation = 0
display-scale = 2
display-rotation = 0
Using product_suffix of iphone
found applelogo at /usr/share/progressui/applelogo@1792~iphone.tga
display: 828 x 1792
Progress Bar Y offset at 112, display class 19
skip_display_poweron_for_device: HW.target returned: N104AP
skip_display_poweron_for_device: DeviceName is: iPhone
powering on display
ramrod_display_set_granular_progress_forced: 0.000000
[06:50:09.0301-GMT]{3>6} CHECKPOINT END: MAIN:[0x0406] set_progress_0
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0301-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0407] start_gasgauge_thread
restore-step-ids = {0x11030407:4}
restore-step-names = {0x11030407:start_gasgauge_thread}
restore-step-uptime = 1
restore-step-user-progress = 0
[06:50:09.0303-GMT]{3>6} CHECKPOINT WARNING: MAIN:[0x0407]
gasgauge_start_update_thread failed: -1
[06:50:09.0303-GMT]{3>6} CHECKPOINT END: MAIN:[0x0407] start_gasgauge_thread
restore-step-ids = {}
restore-step-names = {}
restore-step-warnings = {0x11060407:{0:"gasgauge_start_update_thread failed: -1"}}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0303-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0408] listen_for_log_client
restore-step-ids = {0x11030408:5}
restore-step-names = {0x11030408:listen_for_log_client}
restore-step-uptime = 1
restore-step-user-progress = 0
sock 3: set SO_NOSIGPIPE=1
sock 3: listening on [::]:5000
[06:50:09.0303-GMT]{3>6} CHECKPOINT END: MAIN:[0x0408] listen_for_log_client
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0303-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x040D] create_listen_socket
restore-step-ids = {0x1103040D:6}
restore-step-names = {0x1103040D:create_listen_socket}
restore-step-uptime = 1
restore-step-user-progress = 0
sock 4: set SO_NOSIGPIPE=1
sock 4: listening on [::]:62078
[06:50:09.0304-GMT]{3>6} CHECKPOINT END: MAIN:[0x040D] create_listen_socket
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0304-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0404] update_root_mount
restore-step-ids = {0x11030404:7}
restore-step-names = {0x11030404:update_root_mount}
restore-step-uptime = 1
restore-step-user-progress = 0
[06:50:09.0304-GMT]{3>6} CHECKPOINT END: MAIN:[0x0404] update_root_mount
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0304-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0405] disable_watchdog
restore-step-ids = {0x11030405:8}
restore-step-names = {0x11030405:disable_watchdog}
restore-step-uptime = 1
restore-step-user-progress = 0
[06:50:09.0304-GMT]{3>6} CHECKPOINT END: MAIN:[0x0405] disable_watchdog
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0305-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0410] usbcretimer_dfucheck
restore-step-ids = {0x11030410:9}
restore-step-names = {0x11030410:usbcretimer_dfucheck}
restore-step-uptime = 1
restore-step-user-progress = 0
entering _ramrod_device_has_usbcretimer
entering _ramrod_device_has_usbcretimer
Neither legacy nor UARP retimer present on this platform.
[06:50:09.0308-GMT]{3>6} CHECKPOINT END: MAIN:[0x0410] usbcretimer_dfucheck
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 1
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:09.0308-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x040E] enable_usb
restore-step-ids = {0x1103040E:10}
restore-step-names = {0x1103040E:enable_usb}
restore-step-uptime = 1
restore-step-user-progress = 0
enabling USB (blocking) with description: standardRestore
enabling USB (blocking) finished: success (0)
waiting for matching IOKit service: {
IOProviderClass = AppleUSBDeviceMux;
}
[06:50:14.0581-GMT]{3>6} CHECKPOINT END: MAIN:[0x040E] enable_usb
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 6
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:14.0582-GMT]{3>6} CHECKPOINT BEGIN: MAIN:[0x0411] config_network_interface
restore-step-ids = {0x11030411:11}
restore-step-names = {0x11030411:config_network_interface}
restore-step-uptime = 6
restore-step-user-progress = 0
no device required to enable network interface, skipping
[06:50:14.0593-GMT]{3>6} CHECKPOINT END: MAIN:[0x0411] config_network_interface
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 6
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
waiting for host to trigger start of restore [timeout of 120 seconds]
mDNS [ ]: no usable interfaces found
mDNS [ ]: no usable interfaces found
mDNS [ ]: no usable interfaces found
sock 9: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49152 (from 4)
sock 9: closed
sock 9: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49153 (from 4)
unrecognized request 'GetValue'
sock 10: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49154 (from 4)
unrecognized request 'GetValue'
sock 11: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49155 (from 4)
unrecognized request 'GetValue'
mDNS [ ]: no usable interfaces found
sock 12: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49156 (from 4)
sock 12: closed
sock 12: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49157 (from 4)
sock 12: closed
sock 12: accepted [::ffff:127.0.0.1]:62078 <- [::ffff:127.0.0.1]:49158 (from 4)
Using protocol MuxSocket
starting main restore
[06:50:21.0212-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0600]
client_protocol_version
restore-step-ids = {0x11030600:12}
restore-step-names = {0x11030600:client_protocol_version}
restore-step-uptime = 13
restore-step-user-progress = 0
client protocol version 15
[06:50:21.0213-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0600] client_protocol_version
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0214-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0601] copy_restore_options
restore-step-ids = {0x11030601:13}
restore-step-names = {0x11030601:copy_restore_options}
restore-step-uptime = 13
restore-step-user-progress = 0
unable to open /usr/local/share/restore//options.n104.plist: No such file or
directory
0: NSPOSIXErrorDomain/2: create_dictionary_from_plist: unable to open plist
unable to open /usr/local/share/restore//options.plist: No such file or directory
0: NSPOSIXErrorDomain/2: create_dictionary_from_plist: unable to open plist
Info: Cached restored options set.

*** UUID E64A5E46-4E36-6EDD-49D5-14912EE338D0 ***

Restore options:
CreateFilesystemPartitions => <CFBoolean 0x108e54030 [0x108e57788]>{value
= true}
SupportedAsyncDataTypes => {
BasebandData = 0;
RecoveryOSASRImage = 0;
StreamedImageDecryptionKey = 0;
SystemImageData = 0;
URLAsset = 1;
}
UUID => <CFString 0xccc4488c0
[0x108e57788]>{contents = "E64A5E46-4E36-6EDD-49D5-14912EE338D0"}
HostHasFixFor99053849 => <CFBoolean 0x108e54030 [0x108e57788]>{value
= true}
SystemImageFormat => <CFString 0xccc49b420
[0x108e57788]>{contents = "AEAWrappedDiskImage"}
PersonalizedDuringPreflight => <CFBoolean 0x108e54030 [0x108e57788]>{value
= true}
[06:50:21.0220-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0601] copy_restore_options
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0221-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x06A1]
usbcretimer_dfucheck_enforce
restore-step-ids = {0x110306A1:14}
restore-step-names = {0x110306A1:usbcretimer_dfucheck_enforce}
restore-step-uptime = 13
restore-step-user-progress = 0
[06:50:21.0222-GMT]{3>6} CHECKPOINT END: RESTORED:[0x06A1]
usbcretimer_dfucheck_enforce
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0223-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x06AF] network_config_enforce
restore-step-ids = {0x110306AF:15}
restore-step-names = {0x110306AF:network_config_enforce}
restore-step-uptime = 13
restore-step-user-progress = 0
[06:50:21.0223-GMT]{3>6} CHECKPOINT END: RESTORED:[0x06AF] network_config_enforce
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0224-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0655] is_host_compatible
restore-step-ids = {0x11030655:16}
restore-step-names = {0x11030655:is_host_compatible}
restore-step-uptime = 13
restore-step-user-progress = 0
CHECKPOINT_INTERNAL_ERROR(checkpoint_engine_set_supports_async_operations): Async
support set to: true
host/device compatibility check found that a message is missing or is not supported
(optional): RestoreProtocol

host/device compatibility check found that a message is missing or is not supported

(optional): SourceBootObjectV5

Checkpoint engine recorder path set to /mnt5

[06:50:21.0225-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0655] is_host_compatible
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0226-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0604]
set_weight_from_options
restore-step-ids = {0x11030604:17}
restore-step-names = {0x11030604:set_weight_from_options}
restore-step-uptime = 13
restore-step-user-progress = 0
[06:50:21.0228-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0604] set_weight_from_options
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0228-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x068F]
libauthinstall_callback
restore-step-ids = {0x1103068F:18}
restore-step-names = {0x1103068F:libauthinstall_callback}
restore-step-uptime = 13
restore-step-user-progress = 0
[06:50:21.0230-GMT]{3>6} CHECKPOINT END: RESTORED:[0x068F] libauthinstall_callback
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0231-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0608] device_has_hoover
restore-step-ids = {0x11030608:19}
restore-step-names = {0x11030608:device_has_hoover}
restore-step-uptime = 13
restore-step-user-progress = 0
[06:50:21.0234-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0608] device_has_hoover
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0235-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x060B] update_ticket
restore-step-ids = {0x1103060B:20}
restore-step-names = {0x1103060B:update_ticket}
restore-step-uptime = 13
restore-step-user-progress = 0
entering ramrod_ticket_update_verify
looking up boot manifest hash
device tree ticket_hash:
A3137A77038AA9C59B893700065E63802C6572AD2D9510ECC80A4256129963830B7061641E0FB4D103C
FDF4E8DCB7DB3
crypto-hash-method found. Using SHA2-384
computed ticket_hash :
A3137A77038AA9C59B893700065E63802C6572AD2D9510ECC80A4256129963830B7061641E0FB4D103C
FDF4E8DCB7DB3
received valid ticket (8961 bytes)
[06:50:21.0239-GMT]{3>6} CHECKPOINT END: RESTORED:[0x060B] update_ticket
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0239-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x060D] wait_for_storage
restore-step-ids = {0x1103060D:21}
restore-step-names = {0x1103060D:wait_for_storage}
restore-step-uptime = 13
restore-step-user-progress = 0
entering wait_for_storage_device
ramrod_display_set_granular_progress_forced: 0.000000
Searching for NAND service
Searching for NAND service
Found NAND service: AppleANS2CGNVMeController
NAND initialized. Waiting for devnode.
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
[06:50:21.0255-GMT]{3>6} CHECKPOINT END: RESTORED:[0x060D] wait_for_storage
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 13
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:21.0256-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x060E] update_NAND_firmware
restore-step-ids = {0x1103060E:22}
restore-step-names = {0x1103060E:update_NAND_firmware}
restore-step-uptime = 13
restore-step-user-progress = 0
ramrod_display_set_granular_progress_forced: 0.000000
entering ramrod_execute_command_with_config: /usr/bin/nvmefwupdater
executing /usr/bin/nvmefwupdater --query
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>nand</key>
<string>S4E/000000100231931D.pak</string>
</dict>
</plist>
waiting for child to exit
child exited
exit status: 0
entering update_NAND
Updating NAND: "/usr/standalone/firmware/S4E/000000100231931D.pak"
No PHY update data provided; skipping PHY update
entering ramrod_execute_command_with_config: /usr/bin/nvmefwupdater
executing /usr/bin/nvmefwupdater --validate --nand_fw
/usr/standalone/firmware/S4E/000000100231931D.pak
NVMe Updater: msp = /usr/standalone/firmware/S4E/000000100231931D.pak phyText =
(null) phyData = (null)
NVMe Updater: Performing BFH OFW stage...
s4e-bfh-params: 50555746 001C0001 004080D9 004080DB 004080DD 004280E6 004680EB
805080EC 030080FF 00060002 100108A8 00000000
NVMe Updater: set_pci_port_state: result=0
NVMe Updater: set_pci_port_state: result=0
NVMe Updater: returning Regular Update Required
waiting for child to exit
child exited
exit status: 1
entering ramrod_execute_command_with_config: /usr/bin/nvmefwupdater
executing /usr/bin/nvmefwupdater --update --nand_fw
/usr/standalone/firmware/S4E/000000100231931D.pak
NVMe Updater: Downloading FW...
NVMe Updater: Passthrough command done fNVMeStatus=0x0 fReturn=0x0
NVMe Updater: Activating FW...
NVMe Updater: Passthrough command done fNVMeStatus=0x0 fReturn=0x0
NVMe Updater: Successfully updated FW...
waiting for child to exit
child exited
exit status: 1
entering ramrod_execute_command_with_config: /usr/bin/nvmefwupdater
executing /usr/bin/nvmefwupdater --sendtunabletables
NVMe Updater: nand-dev-platform - Device tree property wasn't found
NVMe Updater: Checking for standard tunable bundle id property: tunable-table-
bundle
NVMe Updater: tunable-table-bundle - Device tree property wasn't found
NVMe Updater: Did not find tunable table bundle file property
waiting for child to exit
child exited
exit status: 9
nvmefwupdater was unable to find the tunable table bundle name in the device tree
[06:50:27.0442-GMT]{3>6} CHECKPOINT END: RESTORED:[0x060E] update_NAND_firmware
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 19
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:27.0443-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x060F] clear_remap_variable
restore-step-ids = {0x1103060F:23}
restore-step-names = {0x1103060F:clear_remap_variable}
restore-step-uptime = 19
restore-step-user-progress = 0
entering clear_remap_variable
enable-remap-mode = <delete>
[06:50:27.0443-GMT]{3>6} CHECKPOINT END: RESTORED:[0x060F] clear_remap_variable
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 19
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:27.0443-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x065C] print_nvram_variables
restore-step-ids = {0x1103065C:24}
restore-step-names = {0x1103065C:print_nvram_variables}
restore-step-uptime = 19
restore-step-user-progress = 0
ramrod_print_NVRAM_variables
NVRAM variables:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>StartupMute</key>
<data>
MQ==
</data>
<key>SystemAudioVolumeSaved</key>
<data>
MQ==
</data>
<key>auto-boot</key>
<data>
ZmFsc2U=
</data>
<key>backlight-level</key>
<data>
MTQxMQ==
</data>
<key>backlight-nits</key>
<data>
MHgwMGEwYjRjYg==
</data>
<key>boot-args</key>
<string></string>
<key>bootdelay</key>
<data>
MA==
</data>
<key>fm-account-masked</key>
 <data>
auKAouKAouKAouKAouKAokBnbWFpbC5jb20=
</data>
<key>fm-activation-locked</key>
<data>
WUVT
</data>
<key>fm-spkeys</key>
<data>
YnBsaXN0MDDWAQIDBAUGBwgJCgsMUXBRYlFzUWxRaVF2TxA5BIOPDyACRG58dEcr3nqF
onjz4eFWFasfWzNNhdxWYNirZD3sqUQ0SlzDeH1x8LhkVDD6Y8WX767oM0HFmEAnT5DB
TxAgbEKJxAXzmvVKqHSgIASf9/adxPT5aIPW0pueie4PiGVPEBCeTg7t3D9EeLi9xC9p
2TPaEAHSDQ4PFFExUTLSEBESE1FzUWwQYBAA0hEQExIIFRcZGx0fIV1miZyeo6WnrK6w
srQAAAAAAAABAQAAAAAAAAAVAAAAAAAAAAAAAAAAAAAAuQ==
</data>
<key>fm-spstatus</key>
<data>
WUVT
</data>
<key>restore-outcome</key>
<data>
aW5pdGlhbF9lbmdpbmVfbm9fcmV0dXJu
</data>
<key>usbcfwflasherResult</key>
<data>
Tm8gZXJyb3Jz
</data>
</dict>
</plist>

[06:50:27.0443-GMT]{3>6} CHECKPOINT END: RESTORED:[0x065C] print_nvram_variables

restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 19
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:27.0443-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0610] asp_nand_set_writable
restore-step-ids = {0x11030610:25}
restore-step-names = {0x11030610:asp_nand_set_writable}
restore-step-uptime = 19
restore-step-user-progress = 0
[06:50:27.0443-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0610] asp_nand_set_writable
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 19
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:27.0443-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0613]
find_filesystem_partitions
restore-step-ids = {0x11030613:26}
restore-step-names = {0x11030613:find_filesystem_partitions}
restore-step-uptime = 19
restore-step-user-progress = 0
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
Found synthesized APFS container. Using disk2 instead of /dev/disk0s1
device is APFS formatted
found system volume not at /dev/disk0s1s1: System
Captured preboot partition on main OS container 2
find_filesystem_partitions: storage=/dev/disk0 container=/dev/disk2
system=/dev/disk2s1 data=/dev/disk2s8 user=/dev/disk2s2 baseband data=/dev/disk2s4
log= update=/dev/disk2s7 xart=/dev/disk2s3 hardware=/dev/disk2s5 scratch=
preboot=/dev/disk2s6
find_filesystem_partitions: recovery os container= volume=
[06:50:27.0445-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0613]
find_filesystem_partitions
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 19
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:27.0445-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x067E]
verify_storage_for_update
restore-step-ids = {0x1103067E:27}
restore-step-names = {0x1103067E:verify_storage_for_update}
restore-step-uptime = 19
restore-step-user-progress = 0
[06:50:27.0446-GMT]{3>6} CHECKPOINT END: RESTORED:[0x067E]
verify_storage_for_update
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 19
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:27.0446-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0609] load_sep_os
restore-step-ids = {0x11030609:28}
restore-step-names = {0x11030609:load_sep_os}
restore-step-uptime = 19
restore-step-user-progress = 0
entering load_sep_os
IODeviceTree:/arm-io/sep/iop-sep-nub/xART found
We should have an xART partition.
device has xART volume - initializing gigalocker
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R /dev/disk2s3 /mnt7
waiting for child to exit
child exited
exit status: 0
/dev/disk2s3 mounted on /mnt7
xART mounted read-write
entering ramrod_init_gigalocker
IODeviceTree:/arm-io/sep/iop-sep-nub/xART found
We should have an xART partition.
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --gigalocker-init
seputil: Gigalocker file (/mnt7/046518D5-6EFD-587C-9FC2-6F48EA7528E3.gl) exists
seputil: Gigalocker initialization completed
waiting for child to exit
child exited
exit status: 0
device has sep - getting firmware
entering copy_restore_sep
returning restore_sep: 1
entering copy_sep_patch
returning sep_patch: 0
no sep patches
got sep firmware - making call to load it
entering ramrod_load_sep_os
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --restore+art -
waiting for child to exit
child exited
exit status: 0
entering ramrod_wait_for_sep_load
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --ping
seputil: ping failed
waiting for child to exit
child exited
exit status: 5
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --ping
waiting for child to exit
child exited
exit status: 0
SEP OS is booted
entering ramrod_notify_sep_for_erase
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --erase
waiting for child to exit
child exited
exit status: 0
[06:50:31.0078-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0609] load_sep_os
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0078-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0693] preload_keys_for_fsck
restore-step-ids = {0x11030693:29}
restore-step-names = {0x11030693:preload_keys_for_fsck}
restore-step-uptime = 23
restore-step-user-progress = 0
Erase install, not preloading keys
Data volume access restricted; must avoid any read/write mounting
[06:50:31.0079-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0693] preload_keys_for_fsck
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0079-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0665] fsck_filesystems
restore-step-ids = {0x11030665:30}
restore-step-names = {0x11030665:fsck_filesystems}
restore-step-uptime = 23
restore-step-user-progress = 0
entering unmount_filesystems_everything
ramrod_display_set_granular_progress_forced: 0.000000
entering force_unmount_partition
entering ramrod_shutdown_gigalocker
IODeviceTree:/arm-io/sep/iop-sep-nub/xART found
We should have an xART partition.
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --gigalocker-shutdown
waiting for child to exit
child exited
exit status: 0
xART unmounted
Skipping fsck on erase install
[06:50:31.0205-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0665] fsck_filesystems
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0205-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0614] mount_system_partition
restore-step-ids = {0x11030614:31}
restore-step-names = {0x11030614:mount_system_partition}
restore-step-uptime = 23
restore-step-user-progress = 0
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R -o rdonly /dev/disk2s1 /mnt1
waiting for child to exit
child exited
exit status: 0
/dev/disk2s1 mounted on /mnt1
System mounted read-only
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R -o rdonly /dev/disk2s5 /mnt6
waiting for child to exit
child exited
exit status: 0
/dev/disk2s5 mounted on /mnt6
Hardware mounted read-only
[06:50:31.0354-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0614] mount_system_partition
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0354-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0696] fix_cache_delete
restore-step-ids = {0x11030696:32}
restore-step-names = {0x11030696:fix_cache_delete}
restore-step-uptime = 23
restore-step-user-progress = 0
Skipping for erase install
Done with restored_fix_cache_delete
[06:50:31.0354-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0696] fix_cache_delete
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0354-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x065D] delete_mobilebackups
restore-step-ids = {0x1103065D:33}
restore-step-names = {0x1103065D:delete_mobilebackups}
restore-step-uptime = 23
restore-step-user-progress = 0
[06:50:31.0354-GMT]{3>6} CHECKPOINT END: RESTORED:[0x065D] delete_mobilebackups
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0354-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x06C1] clean_update_volume
restore-step-ids = {0x110306C1:34}
restore-step-names = {0x110306C1:clean_update_volume}
restore-step-uptime = 23
restore-step-user-progress = 0
[06:50:31.0354-GMT]{3>6} CHECKPOINT END: RESTORED:[0x06C1] clean_update_volume
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0354-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x06A3] space_checks
restore-step-ids = {0x110306A3:35}
restore-step-names = {0x110306A3:space_checks}
restore-step-uptime = 23
restore-step-user-progress = 0
Skipping restored space checks for erase install
Done with restore space checks
[06:50:31.0355-GMT]{3>6} CHECKPOINT END: RESTORED:[0x06A3] space_checks
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0355-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x069F]
clear_mobile_gestalt_cache
restore-step-ids = {0x1103069F:36}
restore-step-names = {0x1103069F:clear_mobile_gestalt_cache}
restore-step-uptime = 23
restore-step-user-progress = 0
Mobile Gestalt cache delete wan't requested, skipping.
Done with restored_clear_mobile_gestalt_cache
[06:50:31.0355-GMT]{3>6} CHECKPOINT END: RESTORED:[0x069F]
clear_mobile_gestalt_cache
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0355-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0654]
read_previous_os_build_version
restore-step-ids = {0x11030654:37}
restore-step-names = {0x11030654:read_previous_os_build_version}
restore-step-uptime = 23
restore-step-user-progress = 0
ramrod_read_previous_os_build_version: previous OS version: 22F76 (user)
[06:50:31.0358-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0654]
read_previous_os_build_version
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0358-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0697] downgrade_check
restore-step-ids = {0x11030697:38}
restore-step-names = {0x11030697:downgrade_check}
restore-step-uptime = 23
restore-step-user-progress = 0
[06:50:31.0359-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0697] downgrade_check
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0359-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0615] copy_hardware_info
restore-step-ids = {0x11030615:39}
restore-step-names = {0x11030615:copy_hardware_info}
restore-step-uptime = 23
restore-step-user-progress = 0
[06:50:31.0359-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0615] copy_hardware_info
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0359-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0616] fdr_create
restore-step-ids = {0x11030616:40}
restore-step-names = {0x11030616:fdr_create}
restore-step-uptime = 23
restore-step-user-progress = 0
restored_fdr_initialize: FDR is supported
CryptoAcceleratorEncrypt: perform aes => 0 (kIOReturnSuccess)
CryptoGenerateRSAKeys: ccrsa_generate_key_deterministic() -> 0
CryptoGenerateRSAKeys: [RSA Public Key SHA1: 20 bytes]
: 75 b1 f4 aa ea 6e 7b b9 85 4c 89 ff 9e 63 b6 4d
: 4b 29 3b 86
: -----------------------------------------------
CryptoGenerateRSAKeys: SecKeyCreateRSAPrivateKey -> 0x1055a8170
CryptoGenerateRSAKeys: SecKeyCreateRSAPublicKey -> 0x1055a8178
created HTTP FDR client 0xccc52df40
created local FDR client 0xccc52dea0
Received response without expected RESTORED_FDR_TRUST_DATA
Received response without expected RESTORED_BOOTED_OS_FDR_TRUST_DATA
Found local trust object, computing digest..
Local trust object digest DOES match AP ticket.
Not enabling SSO for FDR
RestoredFDRCreate() returned 0
FDR is supported on this device
[06:50:31.0442-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0616] fdr_create
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0442-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0617] fdr_save_data
restore-step-ids = {0x11030617:41}
restore-step-names = {0x11030617:fdr_save_data}
restore-step-uptime = 23
restore-step-user-progress = 0
Archiving FDR data from
/mnt6/FactoryData/System/Library/Caches/com.apple.factorydata
[_write_archive_data] write 70 bytes
[_write_archive_data] write 125 bytes
[_write_archive_data] write 11966 bytes
[_write_archive_data] write 111 bytes
[_write_archive_data] write 9222 bytes
[_write_archive_data] write 138 bytes
[_write_archive_data] write 17295 bytes
[_write_archive_data] write 93 bytes
[_write_archive_data] write 8881 bytes
[_write_archive_data] write 119 bytes
[_write_archive_data] write 4039 bytes
[_write_archive_data] write 145 bytes
[_write_archive_data] write 7146 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 22449 bytes
[_write_archive_data] write 116 bytes
[_write_archive_data] write 1048576 bytes
[_write_archive_data] write 715358 bytes
[_write_archive_data] write 114 bytes
[_write_archive_data] write 2865 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 43259 bytes
[_write_archive_data] write 95 bytes
[_write_archive_data] write 3050 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7067 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7079 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 11295 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 6885 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7080 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7140 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 11296 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7061 bytes
[_write_archive_data] write 98 bytes
[_write_archive_data] write 7029 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7075 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7043 bytes
[_write_archive_data] write 123 bytes
[_write_archive_data] write 1048576 bytes
[_write_archive_data] write 1048576 bytes
[_write_archive_data] write 1048576 bytes
[_write_archive_data] write 881719 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7063 bytes
[_write_archive_data] write 123 bytes
[_write_archive_data] write 1048576 bytes
[_write_archive_data] write 322386 bytes
[_write_archive_data] write 123 bytes
[_write_archive_data] write 687585 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 8066 bytes
[_write_archive_data] write 122 bytes
[_write_archive_data] write 3612 bytes
[_write_archive_data] write 121 bytes
[_write_archive_data] write 7388 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 8857 bytes
[_write_archive_data] write 108 bytes
[_write_archive_data] write 274844 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 5001 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 8789 bytes
[_write_archive_data] write 106 bytes
[_write_archive_data] write 19278 bytes
[_write_archive_data] write 111 bytes
[_write_archive_data] write 3154 bytes
[_write_archive_data] write 152 bytes
[_write_archive_data] write 2884 bytes
[_write_archive_data] write 95 bytes
[_write_archive_data] write 2884 bytes
[_write_archive_data] write 107 bytes
[_write_archive_data] write 2783 bytes
[archive_dir] write 8425235 bytes
[archive_dir] final data is 8425235 bytes
[06:50:31.0469-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0617] fdr_save_data
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0469-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0618]
store_baseband_migration
restore-step-ids = {0x11030618:42}
restore-step-names = {0x11030618:store_baseband_migration}
restore-step-uptime = 23
restore-step-user-progress = 0
create_baseband_update_options: Got imeisv: 49
baseband updater options = {
IMEISwVersion = 49;
autoSetupEnv = 0;
disablePing = 1;
restoredInternal = 0;
}
_baseband_update_requires_filesystems_once: querying baseband to determine if it
requires system filesystem
bbupdater: BEGIN: Command: requirePartitionMount
bbupdater: cmdCopyRequirePartitionMount: supports flashless 1
bbupdater: cmdCopyRequirePartitionMount: supports REFS 1
bbupdater: END: Command: requirePartitionMount
_baseband_update_requires_filesystems_once: query returned {
requestedBasebandFSPartitionMountSize = 10;
requireSystemPartitionMount = 1;
requireUserPartitionMount = 1;
}
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
Found synthesized APFS container. Using disk2 instead of /dev/disk0s1
device is APFS formatted
found system volume not at /dev/disk0s1s1: System
Captured preboot partition on main OS container 2
find_filesystem_partitions: storage=/dev/disk0 container=/dev/disk2
system=/dev/disk2s1 data=/dev/disk2s8 user=/dev/disk2s2 baseband data=/dev/disk2s4
log= update=/dev/disk2s7 xart=/dev/disk2s3 hardware=/dev/disk2s5 scratch=
preboot=/dev/disk2s6
find_filesystem_partitions: recovery os container= volume=
could not locate filesystems: 0, ignoring error for an erase install
[06:50:31.0476-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0618] store_baseband_migration
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0476-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0619] check_for_restore_log
restore-step-ids = {0x11030619:43}
restore-step-names = {0x11030619:check_for_restore_log}
restore-step-uptime = 23
restore-step-user-progress = 0
entering check_for_restore_log
ramrod_display_set_granular_progress_forced: 0.000000
restore log does not exist
[06:50:31.0476-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0619] check_for_restore_log
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0476-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x061A] check_for_ota_logs
restore-step-ids = {0x1103061A:44}
restore-step-names = {0x1103061A:check_for_ota_logs}
restore-step-uptime = 23
restore-step-user-progress = 0
Initializing libpartition
Skipping OTA log submission on erase install with damaged gigalocker or missing
data
[06:50:31.0477-GMT]{3>6} CHECKPOINT END: RESTORED:[0x061A] check_for_ota_logs
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0477-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x061B] submit_update_stats
restore-step-ids = {0x1103061B:45}
restore-step-names = {0x1103061B:submit_update_stats}
restore-step-uptime = 23
restore-step-user-progress = 0
Skipping OTA metrics submission on erase install with damaged gigalocker
[06:50:31.0477-GMT]{3>6} CHECKPOINT END: RESTORED:[0x061B] submit_update_stats
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0477-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0661] read_persistent_files
restore-step-ids = {0x11030661:46}
restore-step-names = {0x11030661:read_persistent_files}
restore-step-uptime = 23
restore-step-user-progress = 0
persistent_files_create has nothing to persist.
Checking if hardware folder contents need to be stashed
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R -o rdonly /dev/disk2s7 /mnt4
waiting for child to exit
child exited
exit status: 0
/dev/disk2s7 mounted on /mnt4
Update mounted read-only
Hardware folder found on update volume(/mnt4/Hardware). Attempting to stash
contents
scan_directory: Directory(/mnt4/Hardware) opened
scan_directory: Battery
scan_directory: Directory(/mnt4/Hardware/Battery) opened
scan_directory: Library
scan_directory: Directory(/mnt4/Hardware/Battery/Library) opened
scan_directory: Preferences
scan_directory: Directory(/mnt4/Hardware/Battery/Library/Preferences) opened
scan_directory: com.apple.batterydata.kioskmode.plist
scan_directory: com.apple.batterydata.cyclecount.plist
scan_directory: com.apple.batteryhealthdata.plist
scan_directory: Directory(/mnt4/Hardware/Battery/Library/Preferences) closed
scan_directory: Directory(/mnt4/Hardware/Battery/Library) closed
scan_directory: Directory(/mnt4/Hardware/Battery) closed
scan_directory: Directory(/mnt4/Hardware) closed
hardware_folder_files_data_create: Only saving stat info for directory:
/mnt4/Hardware/Battery
hardware_folder_files_data_create: Initializing Array
hardware_folder_files_data_create: Only saving stat info for directory:
/mnt4/Hardware/Battery/Library
hardware_folder_files_data_create: Only saving stat info for directory:
/mnt4/Hardware/Battery/Library/Preferences
hardware_folder_files_data_create: Attempting to save stat info and data for file
to memory:
/mnt4/Hardware/Battery/Library/Preferences/com.apple.batterydata.kioskmode.plist
hardware_folder_files_data_create: File
/mnt4/Hardware/Battery/Library/Preferences/com.apple.batterydata.kioskmode.plist:
427 bytes read into memory.
hardware_folder_files_data_create: Attempting to save stat info and data for file
to memory:
/mnt4/Hardware/Battery/Library/Preferences/com.apple.batterydata.cyclecount.plist
hardware_folder_files_data_create: File
/mnt4/Hardware/Battery/Library/Preferences/com.apple.batterydata.cyclecount.plist:
71670 bytes read into memory.
hardware_folder_files_data_create: Attempting to save stat info and data for file
to memory:
/mnt4/Hardware/Battery/Library/Preferences/com.apple.batteryhealthdata.plist
hardware_folder_files_data_create: File
/mnt4/Hardware/Battery/Library/Preferences/com.apple.batteryhealthdata.plist: 2445
bytes read into memory.
hardware_folder_files_data_create: 6 files found in total.
Copying of battery data into memory completed successfully
Unmounting update volume
entering force_unmount_partition
Update unmounted
Successfully unmounted update volume
Done checking hardware folder contents
[06:50:31.0549-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0661] read_persistent_files
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0549-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x061D]
unmount_unconditionally
restore-step-ids = {0x1103061D:47}
restore-step-names = {0x1103061D:unmount_unconditionally}
restore-step-uptime = 23
restore-step-user-progress = 0
entering unmount_filesystems_everything
ramrod_display_set_granular_progress_forced: 0.000000
entering force_unmount_partition
Hardware unmounted
ramrod_display_set_granular_progress_forced: 0.000000
entering force_unmount_partition
System unmounted
[06:50:31.0551-GMT]{3>6} CHECKPOINT END: RESTORED:[0x061D] unmount_unconditionally
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 23
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:31.0551-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x064E] clean_nand
restore-step-ids = {0x1103064E:48}
restore-step-names = {0x1103064E:clean_nand}
restore-step-uptime = 23
restore-step-user-progress = 0
entering clean_NAND
NAND format complete
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
find_filesystem_partitions: storage=/dev/disk0 container= system= data= user=
baseband data= log= update= xart= hardware= scratch= preboot=
find_filesystem_partitions: recovery os container= volume=
[06:50:33.0020-GMT]{3>6} CHECKPOINT END: RESTORED:[0x064E] clean_nand
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0021-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x061F]
format_effaceable_storage
restore-step-ids = {0x1103061F:49}
restore-step-names = {0x1103061F:format_effaceable_storage}
restore-step-uptime = 25
restore-step-user-progress = 0
entering format_effaceable_storage
effaceable storage is formatted, clearing it
effaceable storaged cleared
[06:50:33.0200-GMT]{3>6} CHECKPOINT END: RESTORED:[0x061F]
format_effaceable_storage
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0201-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x068A] format_ean_storage
restore-step-ids = {0x1103068A:50}
restore-step-names = {0x1103068A:format_ean_storage}
restore-step-uptime = 25
restore-step-user-progress = 0
entering format_ean_storage
Ean storage not present for this device. Skipping ean format.
[06:50:33.0202-GMT]{3>6} CHECKPOINT END: RESTORED:[0x068A] format_ean_storage
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0203-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0621]
create_filesystem_partitions
restore-step-ids = {0x11030621:51}
restore-step-names = {0x11030621:create_filesystem_partitions}
restore-step-uptime = 25
restore-step-user-progress = 0
APFS Erase Install
entering create_filesystem_partition
ramrod_display_set_granular_progress_forced: 0.000000
[06:50:33.0292-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0621]
create_filesystem_partitions
restore-step-ids = {}
restore-step-names = {}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0293-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0677]
perform_main_os_prepare
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 25
restore-step-user-progress = 0
[06:50:33.0293-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x0660]
update_partitions_for_apfs
restore-step-ids = {0x11030677:52;0x11030660:53}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030660:update_partitions_for_apfs}
restore-step-uptime = 25
restore-step-user-progress = 0
[06:50:33.0294-GMT]{3>6} CHECKPOINT END: (null):[0x0660] update_partitions_for_apfs
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0294-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x0622]
reload_filesystem_partitions
restore-step-ids = {0x11030677:52;0x11030622:54}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030622:reload_filesystem_partitions}
restore-step-uptime = 25
restore-step-user-progress = 0
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
find_filesystem_partitions: storage=/dev/disk0 container=/dev/disk0s1 system= data=
user= baseband data= log= update= xart= hardware= scratch= preboot=
find_filesystem_partitions: recovery os container= volume=
[06:50:33.0299-GMT]{3>6} CHECKPOINT END: (null):[0x0622]
reload_filesystem_partitions
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0299-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x160D]
delete_recovery_partition
restore-step-ids = {0x11030677:52;0x1103160D:55}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x1103160D:delete_recovery_partition}
restore-step-uptime = 25
restore-step-user-progress = 0
[06:50:33.0299-GMT]{3>6} CHECKPOINT END: (null):[0x160D] delete_recovery_partition
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 25
restore-step-user-progress = 0
Considering saving tolerated failures: false (null) false
[06:50:33.0300-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x0658] format_media
restore-step-ids = {0x11030677:52;0x11030658:56}
restore-step-names = {0x11030677:perform_main_os_prepare;0x11030658:format_media}
restore-step-uptime = 25
restore-step-user-progress = 0
entering create_apfs_filesystems
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
find_filesystem_partitions: storage=/dev/disk0 container=/dev/disk0s1 system= data=
user= baseband data= log= update= xart= hardware= scratch= preboot=
find_filesystem_partitions: recovery os container= volume=
ramrod_display_set_granular_progress_forced: 4.000000
/System/Library/Filesystems/apfs.fs/newfs_apfs -C /dev/disk0s1
entering ramrod_execute_command_with_config:
/System/Library/Filesystems/apfs.fs/newfs_apfs
executing /System/Library/Filesystems/apfs.fs/newfs_apfs -C /dev/disk0s1
waiting for child to exit
child exited
exit status: 0
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
Found synthesized APFS container. Using disk2 instead of /dev/disk0s1
device is APFS formatted
find_filesystem_partitions: storage=/dev/disk0 container=/dev/disk2 system= data=
user= baseband data= log= update= xart= hardware= scratch= preboot=
find_filesystem_partitions: recovery os container= volume=
block size for /dev/disk2: 4096
/System/Library/Filesystems/apfs.fs/newfs_apfs -A -D -o role=s -v System /dev/disk2
entering ramrod_execute_command_with_config:
/System/Library/Filesystems/apfs.fs/newfs_apfs
executing /System/Library/Filesystems/apfs.fs/newfs_apfs -A -D -o role=s -v
System /dev/disk2
waiting for child to exit
child exited
exit status: 0
IODeviceTree:/arm-io/sep/iop-sep-nub/xART found
We should have an xART partition.
Will create an xART partition.
block size for /dev/disk2: 4096
/System/Library/Filesystems/apfs.fs/newfs_apfs -s 10485760 -A -D -o role=x -v
xART /dev/disk2
entering ramrod_execute_command_with_config:
/System/Library/Filesystems/apfs.fs/newfs_apfs
executing /System/Library/Filesystems/apfs.fs/newfs_apfs -s 10485760 -A -D -o
role=x -v xART /dev/disk2
waiting for child to exit
child exited
exit status: 0
block size for /dev/disk2: 4096
/System/Library/Filesystems/apfs.fs/newfs_apfs -s 10485760 -A -D -o role=a -v
Baseband Data /dev/disk2
entering ramrod_execute_command_with_config:
/System/Library/Filesystems/apfs.fs/newfs_apfs
executing /System/Library/Filesystems/apfs.fs/newfs_apfs -s 10485760 -A -D -o
role=a -v Baseband Data /dev/disk2
waiting for child to exit
child exited
exit status: 0
Hardware partition size calculation:
24 MiB FDR
15 MiB Pearl Reference Frames
4 MiB free space for apfs
--------
43 MiB total
IORegistry requires a 43 MiB Hardware Partition
block size for /dev/disk2: 4096
/System/Library/Filesystems/apfs.fs/newfs_apfs -s 45088768 -A -D -o role=h -v
Hardware /dev/disk2
entering ramrod_execute_command_with_config:
/System/Library/Filesystems/apfs.fs/newfs_apfs
executing /System/Library/Filesystems/apfs.fs/newfs_apfs -s 45088768 -A -D -o
role=h -v Hardware /dev/disk2
waiting for child to exit
child exited
exit status: 0
Waiting to decide if scratch is needed.
Update partition is not created as part of create_apfs_filesystems..skipping
block size for /dev/disk2: 4096
/System/Library/Filesystems/apfs.fs/newfs_apfs -A -D -o role=b -v Preboot
/dev/disk2
entering ramrod_execute_command_with_config:
/System/Library/Filesystems/apfs.fs/newfs_apfs
executing /System/Library/Filesystems/apfs.fs/newfs_apfs -A -D -o role=b -v Preboot
/dev/disk2
waiting for child to exit
child exited
exit status: 0
[06:50:34.0303-GMT]{3>6} CHECKPOINT END: (null):[0x0658] format_media
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 26
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:34.0304-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x0659]
find_volumes_after_format
restore-step-ids = {0x11030677:52;0x11030659:57}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030659:find_volumes_after_format}
restore-step-uptime = 26
restore-step-user-progress = 4
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
Found synthesized APFS container. Using disk2 instead of /dev/disk0s1
device is APFS formatted
found system volume not at /dev/disk0s1s1: System
Captured preboot partition on main OS container 2
find_filesystem_partitions: storage=/dev/disk0 container=/dev/disk2
system=/dev/disk2s1 data= user= baseband data=/dev/disk2s4 log= update=
xart=/dev/disk2s3 hardware=/dev/disk2s5 scratch= preboot=/dev/disk2s6
find_filesystem_partitions: recovery os container= volume=
[06:50:34.0306-GMT]{3>6} CHECKPOINT END: (null):[0x0659] find_volumes_after_format
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 26
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:34.0307-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x06B3] prepare_for_system_image
restore-step-ids = {0x11030677:52;0x110306B3:58}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x110306B3:prepare_for_system_image}
restore-step-uptime = 26
restore-step-user-progress = 4
libpartition: entering _partition_wait_for_device: 'EmbeddedDeviceTypeRoot'

libpartition: Using device path /dev/disk0 for EmbeddedDeviceTypeRoot

libpartition: entering _partition_probe_media_should_retry.

libpartition: APFS Container 'Container' /dev/disk0s1

libpartition: Found synthesized APFS container. Using disk2 instead of /dev/disk0s1

libpartition: found system volume not at disk0s1s1: System

libpartition: unexpected partition 'Hardware' - skipping

libpartition: /sbin/newfs_apfs
libpartition: -o
libpartition: role=p
libpartition: -A
libpartition: -v
libpartition: Update
libpartition: /dev/disk2
libpartition:

entering ramrod_execute_command_with_config: /sbin/newfs_apfs

executing /sbin/newfs_apfs -o role=p -A -v Update /dev/disk2
waiting for child to exit
child exited
exit status: 0
libpartition: entering _partition_wait_for_device: 'EmbeddedDeviceTypeRoot'

libpartition: Using device path /dev/disk0 for EmbeddedDeviceTypeRoot

libpartition: entering _partition_probe_media_should_retry.

libpartition: APFS Container 'Container' /dev/disk0s1

libpartition: Found synthesized APFS container. Using disk2 instead of /dev/disk0s1

libpartition: found system volume not at disk0s1s1: System

libpartition: unexpected partition 'Hardware' - skipping

entering ramrod_execute_command_with_config: /sbin/mount
executing /sbin/mount -t apfs -o nobrowse /dev/disk2s7 /mnt4
waiting for child to exit
child exited
exit status: 0
libpartition: create_update_partition_folder_hierarchy: Creating folder hierarchy
for update partition
libpartition: Creating hardware folder hierarchy

libpartition: Creating root folder

libpartition: Successfully created root Hardware folder. Proceeding to create the
rest of the folder hierarchy
libpartition: Successfully created Battery under /mnt4/Hardware with permissions
0700 for user root
libpartition: create_update_partition_folder_hierarchy: Done creating folder
hierarchy for update partition
Attempting to delete stale low space cleanup cookie file(if any)
Successfully deleted low space cleanup cookie file
libpartition: entering get_main_container_space_info

libpartition: No data device found, can't retrieve space info

Space usage: DataVolumeSpaceUsed: 0 MB ContainerFreeSpace: 60920 MB
Prepare for ASR succeeded
[06:50:34.0724-GMT]{3>6} CHECKPOINT END: (null):[0x06B3] prepare_for_system_image
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 26
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:34.0725-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x065A] baseband_migration_data
restore-step-ids = {0x11030677:52;0x1103065A:59}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x1103065A:baseband_migration_data}
restore-step-uptime = 26
restore-step-user-progress = 4
[06:50:34.0725-GMT]{3>6} CHECKPOINT END: (null):[0x065A] baseband_migration_data
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 26
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:34.0725-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x0675] init_gigalocker
restore-step-ids = {0x11030677:52;0x11030675:60}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030675:init_gigalocker}
restore-step-uptime = 26
restore-step-user-progress = 4
IODeviceTree:/arm-io/sep/iop-sep-nub/xART found
We should have an xART partition.
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R /dev/disk2s3 /mnt7
waiting for child to exit
child exited
exit status: 0
/dev/disk2s3 mounted on /mnt7
xART mounted read-write
entering ramrod_init_gigalocker
IODeviceTree:/arm-io/sep/iop-sep-nub/xART found
We should have an xART partition.
entering ramrod_execute_command_with_config: /usr/libexec/seputil
executing /usr/libexec/seputil --gigalocker-init
seputil: Gigalocker file (/mnt7/046518D5-6EFD-587C-9FC2-6F48EA7528E3.gl) doesn't
exist: No such file or directory
seputil: Gigalocker initialization completed
waiting for child to exit
child exited
exit status: 0
gigalocker: ONLINE
[06:50:35.0048-GMT]{3>6} CHECKPOINT END: (null):[0x0675] init_gigalocker
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 27
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:35.0049-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x068C]
init_permanent_update_volume
restore-step-ids = {0x11030677:52;0x1103068C:61}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x1103068C:init_permanent_update_volume}
restore-step-uptime = 27
restore-step-user-progress = 4
libpartition: entering _partition_wait_for_device: 'EmbeddedDeviceTypeRoot'

libpartition: Using device path /dev/disk0 for EmbeddedDeviceTypeRoot

libpartition: entering _partition_probe_media_should_retry.

libpartition: APFS Container 'Container' /dev/disk0s1

libpartition: Found synthesized APFS container. Using disk2 instead of /dev/disk0s1

libpartition: found system volume not at disk0s1s1: System

libpartition: unexpected partition 'Hardware' - skipping

libpartition: not deleting existing update filesystem
entering ramrod_execute_command_with_config: /sbin/mount
executing /sbin/mount -t apfs -o nobrowse /dev/disk2s7 /mnt4
waiting for child to exit
child exited
exit status: 0
libpartition: create_update_partition_folder_hierarchy: Creating folder hierarchy
for update partition
libpartition: Creating hardware folder hierarchy

libpartition: Creating root folder

libpartition: Successfully created root Hardware folder. Proceeding to create the
rest of the folder hierarchy
libpartition: Successfully created Battery under /mnt4/Hardware with permissions
0700 for user root
libpartition: create_update_partition_folder_hierarchy: Done creating folder
hierarchy for update partition
Update volume was successfully unmounted.
libpartition: Deleting contents of /mnt4...
libpartition: Could not reset metadata on /mnt4: Read-only file system
libpartition: Deleting contents of /mnt4 failed (result: 30).
entering ramrod_probe_media_internal
entering wait_for_device: 'EmbeddedDeviceTypeRoot'
Using device path /dev/disk0 for EmbeddedDeviceTypeRoot
device partitioning scheme is GPT
APFS Container 'Container' /dev/disk0s1
Found synthesized APFS container. Using disk2 instead of /dev/disk0s1
device is APFS formatted
found system volume not at /dev/disk0s1s1: System
Captured preboot partition on main OS container 2
[06:50:35.0191-GMT]{3>6} CHECKPOINT END: (null):[0x068C]
init_permanent_update_volume
restore-step-ids = {0x11030677:52}
restore-step-names = {0x11030677:perform_main_os_prepare}
restore-step-uptime = 27
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:35.0192-GMT]{3>6} CHECKPOINT BEGIN: (null):[0x0626] mount_filesystem
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
xART already mounted
entering mount_filesystems
ramrod_display_set_granular_progress_forced: 4.000000
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R /dev/disk2s1 /mnt1
waiting for child to exit
child exited
exit status: 0
/dev/disk2s1 mounted on /mnt1
System mounted read-write
Not counting data volume as required.
Not counting user volume as required.
ramrod_display_set_granular_progress_forced: 4.000000
entering mount_partition
entering ramrod_execute_command_with_config: /sbin/mount_apfs
executing /sbin/mount_apfs -R /dev/disk2s4 /mnt3
waiting for child to exit
child exited
exit status: 0
/dev/disk2s4 mounted on /mnt3
Baseband Data mounted read-write
ramrod_display_set_granular_progress_forced: 4.000000
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
error sending progress message (16 - -1): -1
[06:50:35.0329-GMT]{3>6} CHECKPOINT FAILURE:(FAILURE:9) (null):[0x0626]
mount_filesystem [0]D(failed to mount filesystems)
restore-step-results = {0x11070626:{0:9}}
restore-step-codes = {0x11070626:{0:9}}
restore-step-domains = {0x11070626:{0:"AMRestoreErrorDomain"}}
restore-step-error = {0x11070626:"[0]D(failed to mount filesystems)"}
restore-step-uptime = 27
restore-step-user-progress = 4
[06:50:35.0329-GMT]{3>6} CHECKPOINT NOTICE: (NVRAM set) restore-step-user-
progress=4 [sync=true] (first failure)
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0329-GMT]{3>6} CHECKPOINT FAILURE:(FAILURE:9) RESTORED:[0x0677]
perform_main_os_prepare [0]D(failed to mount filesystems)
restore-step-results = {0x11070677:{0:9};0x11070626:{0:9}}
restore-step-codes = {0x11070677:{0:9};0x11070626:{0:9}}
restore-step-domains = {0x11070677:{0:"AMRestoreErrorDomain"};0x11070626:
{0:"AMRestoreErrorDomain"}}
restore-step-error = {0x11070677:"[0]D(failed to mount filesystems)"}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0329-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x067C] cleanup_boot_command
restore-step-ids = {0x11030677:52;0x11030626:62;0x1103067C:63}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x1103067C:cleanup_
boot_command}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
entering reset_boot_command_if_in_values
recovery-boot-mode = <delete>
iboot-failure-reason = <delete>
[06:50:35.0329-GMT]{3>6} CHECKPOINT END: RESTORED:[0x067C] cleanup_boot_command
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0330-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x1613]
cleanup_recovery_os_volume
restore-step-ids = {0x11030677:52;0x11030626:62;0x11031613:64}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x11031613:cleanup_
recovery_os_volume}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
[06:50:35.0330-GMT]{3>6} CHECKPOINT END: RESTORED:[0x1613]
cleanup_recovery_os_volume
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0330-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0647] cleanup_check_result
restore-step-ids = {0x11030677:52;0x11030626:62;0x11030647:65}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x11030647:cleanup_
check_result}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
[06:50:35.0330-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0647] cleanup_check_result
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0330-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x06C2]
cleanup_send_crash_logs
restore-step-ids = {0x11030677:52;0x11030626:62;0x110306C2:66}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x110306C2:cleanup_
send_crash_logs}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
[06:50:35.0330-GMT]{3>6} CHECKPOINT END: RESTORED:[0x06C2] cleanup_send_crash_logs
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0330-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0648]
cleanup_send_final_status
restore-step-ids = {0x11030677:52;0x11030626:62;0x11030648:67}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x11030648:cleanup_
send_final_status}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
restore failed with CFError:
0: AMRestoreErrorDomain/9: failed to mount filesystems
sock 12: send(12, 4) failed: Broken pipe
error sending final status message
[06:50:35.0330-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0648]
cleanup_send_final_status
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
Considering saving tolerated failures: false (null) false
[06:50:35.0331-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x0649]
cleanup_wait_status_received
restore-step-ids = {0x11030677:52;0x11030626:62;0x11030649:68}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x11030649:cleanup_
wait_status_received}
restore-step-uptime = 27
restore-step-user-progress = 4
sock 12: send(12, 4) failed: Broken pipe
Failed to send message: Error Domain=AMRestoreErrorDomain Code=-1 "Failed to send
message" UserInfo={NSDescription=Failed to send message}
[06:50:35.0331-GMT]{3>6} CHECKPOINT END: RESTORED:[0x0649]
cleanup_wait_status_received
restore-step-ids = {0x11030677:52;0x11030626:62}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem}
restore-step-uptime = 27
restore-step-user-progress = 4
Considering saving tolerated failures: false (null) false
[06:50:35.0331-GMT]{3>6} CHECKPOINT BEGIN: RESTORED:[0x064A]
cleanup_write_restore_log
restore-step-ids = {0x11030677:52;0x11030626:62;0x1103064A:69}
restore-step-names =
{0x11030677:perform_main_os_prepare;0x11030626:mount_filesystem;0x1103064A:cleanup_
write_restore_log}
restore-step-uptime = 27
restore-step-user-progress = 4
attempting to dump restore log
writing log file: /mnt1/restore.log