Stream Branch

B.Tech Electrical and Electronics

B.Arch Architecture

B.Arch Architecture

B.Tech Electronics and communication

B.Tech Mechanical

B.Tech Computer Science

B.Tech Electrical and Electronics

B.Tech Electrical and Electronics

B.Tech Computer Science

B.Tech Civil

B.Tech Electrical and Electronics

B.Tech Electrical and Electronics

B.Tech Civil

B.Tech Chemical

B.Tech Electronics and communication

B.Tech Civil

B.Tech Electronics and communication

B.Tech Electronics and communication

B.Tech Electronics and communication

B.Tech Electrical and Electronics

B.Tech Computer Science

B.Tech Electrical and Electronics

B.Tech Civil

B.Tech Civil

B.Tech Computer Science

B.Tech Chemical
B.Tech Chemical

B.Arch Architecture

B.Tech Mechanical

B.Tech Mechanical

B.Tech Mechanical

B.Tech Mechanical

B.Tech Electronics and communication

M.Tech Construction Technology and Management

B.Tech Electronics and communication

B.Tech Electronics and communication

B.Tech Mining

B.Tech Mechanical

B.Tech Mechanical

M.Tech Applied Mechanics

M.Tech Construction Technology and Management

B.Tech Mining

B.Tech Mining

B.Tech Civil
M.Tech Environmental Engineering

B.Tech Mechanical

B.Tech Mechanical

B.Tech Mechanical

M.Tech Computer Science

M.Tech Computer Science

B.Tech Civil

B.Tech Civil

B.Tech Metallurgy
B.Tech Mechanical

M.Tech Computer Science

M.Tech Integrated Power System

B.Tech Electrical and Electronics

B.Tech Metallurgy

M.Sc. Mathematics

B.Tech Metallurgy

B.Tech Electrical and Electronics

B.Tech Electrical and Electronics

B.Tech Metallurgy

B.Tech Civil

M.Sc. Chemistry

B.Tech Civil

B.Tech Electronics and communication

B.Tech Chemical

B.Tech Electronics and communication

B.Tech Electronics and communication

B.Tech Chemical
B.Tech Computer Science

M.Tech Structural Dynamics and Earthquake Engg.

B.Tech Electronics and communication

B.Tech Computer Science

B.Tech Chemical

B.Tech Civil
Company Name Date of interview

GMMCO 1/17/2025

Galactic 1/21/2025

Galactic Group 1/22/2025

Turing 1/26/2025

Turing 1/25/2025

Turing Global 1/25/2025

Jhon deere 1/28/2025

John Deere 1/28/2025

Turing Global India Private Limited 1/25/2025

DAR-Al-HANDASAH 1/28/2025

John Deere 1/28/2025

Johndeere 10/19/2005

Nice solutions 2/4/2025

JSW 1/22/2025

Winjit Technologies 2/6/2025

JSW 1/28/2025

iQuanti 2/3/2025
Winjit technologies 2/6/2025

IQUANTI 2/5/2025

Bajaj Auto Ltd. 2/17/2025

Sutherland global services 2/13/2025

GAIL 2/17/2025

GAIL 2/17/2025

HPCL 7/28/2024

HCL Technologies 1/16/2025

Veedol Corporation Ltd 2/12/2025

Veedol Oil 2/17/2025

TATA Consulting Engineers Limited (TCE) 1/3/2025

Maharashtra Natural Gas Ltd. 3/3/2025

Sun Pharmaceutical Industries Limited 3/3/2025

Maharashtra Natural Gas Limited 3/4/2025

Maharashtra Natural Gas Limited 3/4/2025

MNGL 3/4/2025

AFCONS LTD 3/5/2025

Bharat Electronics Limited 3/11/2025

Bharat Electronics Limited (BEL) 3/11/2025

Vedanta 3/7/2025

John Deere 3/12/2025

John deer 3/12/2025

Federal Bank 2/20/2025

Afcons Infrastructure 3/5/2025

Vedanta 3/7/2025

VEDANTA LTD 3/6/2025

Afcons Infra LTD. 3/5/2025

Black and veatch 3/11/2025

Thermax 3/20/2025

Thermax Ltd 3/20/2025

EIL (Engineers india limited) 3/18/2025

Bosch 3/13/2025

Bosch Global Software Technologies 3/11/2025

Greenko Group 4/4/2025

Greenko Group 3/29/2002

Kirloskar Ferrous Industries Limited 3/27/2025

Lloyds consulting and engineering 4/4/2025

John Deere 4/7/2025

John Deere 4/8/2025

PWC 10/24/2024

Sunflag steel 4/19/2025

Lalit tutorials 10/5/2025

TCS INE 3/21/2025

PwC 10/24/2024

Pwc 10/24/2024
BAJAJ MUKAND LIMITED 11/19/2024

Axis Bank 12/11/2024

Aakash Educational Service Limited 4/12/2025

ZS assosciates 8/19/2024

UBS ( Union Bank of Switzerland) 8/2/2024

Praj Industries 3/20/2025

Eka Mobility 1/30/2025

Sutherland global services 1/27/2025

Randiant Heat Exchangers 5/23/2025

Bharti Airtel 10/9/2024

Larsen Toubro 11/22/2024

JPMorgan Chase & Co 7/15/2023

UBS 8/2/2024

SHREE CEMENT 6/4/2025

shree cement 4/3/2025

Is the Company hiring for:

Internship

Internship
Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Internship

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Internship

Full Time Employment(FTE)

Full Time Employment(FTE)

Full Time Employment(FTE)

Job Role/Position Applied For Mode of Interview

GET On campus

Architect On campus

Architect On campus

Data analyst Online

Data Analyst Online

Data Analyst On campus

Intern Online

Intern Online
Delivery Data Analyst Online

Structural Engineer (CIVIL) On campus

Engineering - Core Online

Core intern On campus

Data analyst Online

GET Online

Software Developer Online

GTE Online

Analyst Online
Software developer Online

Analyst Online

GTE (Graduate Trainee Engineer) Online

Software Engineer Online

Executive Engineer On campus

Executive Trainee On campus

E-2 Officer On campus

Senior Software Engineer Online

Graduate Engineer Trainee Online

GET Online

GET Online

Management Trainee On campus

GET (SGO) On campus

Management Trainer On campus

Management Trainee On campus

Management trainee On campus

PGET On campus

Probationary Engineer On campus

Probationary Engineer (E-II) On campus

GET Online

Mechanical Engineering intern Online

Not known Online

Officer(Sales and Client Acquisition) On campus

MTE On campus

Graduate Engineer Trainee Online

GET Online

GTE On campus
Intern Online

GET Mechanical. On campus

GET On campus

Management Trainee - Construction On campus

Intern(Intern actual role is not mentioned in profile) Online

Internship Online

GET Online

GET Online

Graduate Engineer Trainee On campus

GET Online

Engineering - Core Information Technology Intern Online

Intern Online

Technology consulting Online

GET Online

Junior Lecturer On campus

ReactJs Developer Online

Consulting Online

Associate Online
GET On campus

Deputy Manager On campus

Assistant Lecturer Online

Decision analysis assosciate On campus

UBS's Graduate Trainee - Technology On campus

GET On campus

GET On campus

Associate DEV & DE Online

Proposal engineer Online

Young Technical Leader Online

Post Graduate Trainee Online

Software Engineer Intern Online

Graduate Trainee Engineer On campus

GET Online

GET Online
1.) Question asked by interviewer ?

Constraints, job profile preference, technical- electrical parts of an airplane and which capacitor
is used in rectifier, resume questions

Where do you see yourself after 10 years?

What you want to do right after your bachelors degree ?

Introduction

Introduce yourself

Tell me about your self

Introduction

What is Thermistor ?
Introduce yourself

what is your aim in future?

Tell me a bit about yourself

Give you introduction

Tell me about final year project

Introduction

That are the questions for final round of the process. 1) Intro 2) write code in any online
compiler. Return the angle between minute hand and hour hand in a clock..

In asituation where you are facing issues with your immediate boss how will you respond to it?

Related to Project i made using Power Bi and Microsoft Excel, My project was HR analytics
Dashboard.
Write code for, You are given an array [4,9,2,3] you have to find the maximum integer that can
be formed using the elements of the given array.

Introduced myself,then asked why i applied for analyst role when i did ECE?

Which Indian Prime Minister was married but no to a Woman (HR) ?

Tell me about yourself

Introduction

Introduce yourself including details of family interests and reason for choosing civil engineering

Introduce Yourself

In technical rounds question

Why do you choose manufacturing sector in Supply Chain management?

Introduce yourself.

Please give a breif of work done during internship.

Describe your internship/your achievements in your internship

What is carburetion?

How a turbocharger works?

Difference between VCR and VAM ?

Explain about your internship and they did some cross questions on that .

Introduce yourself

What Is your favorite subject ?

Why is your CGPA low

Tell me about yourself

What will be the stress distribution if the axial and transverse load is applied on a cantilever
beam

Asked my domain interest

Introduce yourself?

what are different dependencies between activities?

What do you know about Vedanta

INTRODUCE YOURSELF

Types of concrete on the basis of grades

Tell me about yourself

Brief Intro about you, your family, your educational background, what you like, interests and
Hobbies

They directly jumped My internship, No introduction. Asked About Thermal power plant

Introduce yourself.

What is semaphore

Return the second maximum element of linkedlist and array.

Introduction

What is initial & final setting time of cement and explain the lab test for the same.

Give a short introduction of yourself

Questions related to ic engine like 4 stroke engine, 2 stroke engine, transmission system

Explain any one of your Data Science project along with the technologies used?

Which software will you use to design or simulate

Explain abt your projects and how do you think you can improve this ?

Difference between BOF and EAF

Explain the real life application of the the topic I have explainied in my Demo lecture, eg. IN my
case I explained "Relation" so the application of relation concept of mathematics was asked.

Introduction and About your internships you have done

Explain any project which is mentioned in your resume

Introduction
Intro about my self

Tell me about yourself.

What is Perkin's Reaction ?

GFG riddle

In my recent resume project, I was asked how I connect multiple MySQL tables. I was then
given a medium-level SQL problem requiring me to perform a union of two tables and identify
employees in the CS department with a salary greater than $10,000.

Okay, Shounak, Tell me about yourself, your family, your educational background

What do u say Innovation in sanskrit

intial sql questions - Explain the difference between INNER JOIN, LEFT JOIN, and FULL
OUTER JOIN with examples with proper definition n all

Introduce yourself
Asked about projects like why did u make it? Whats the payment api you are using ?

Introduce yourself

Do you have any plans for starting a startup?

What are the projects u developed?

what is the time required to take water from 80 degree to 160 degree , if heater appiled is of
1000 W ?

WHAT IS WORKABILITY OF CONCRETE

Answers given by students.

To start my own firm

Gaining practical experience and then setting up my own firm

Basic introduction

Good morning, sir. I am Vaibhav Patil from Solapur, Maharashtra, a final-year B.Tech student in Mechanical Engineering with a
8.34. I completed my summer internship at Zeus Numerix, where I worked on GUI development. I am proficient in C, C++, Pyth
Over the past three years, I have worked on various technologies, and I am now eager to contribute to your organization.

I have given a brief introduction about myself

My name, address, my work profile, my learning

Device or element which changes it's resistance with change in temperature. Types Negative Temperature Coefficient NTC and
Temperature Coefficient PTC
I gave my introduction in few lines that included my name, department, technical skills and hobbies.

I want to do my carrier in structural domain.etc

I confidently gave my introduction and made sure that I tell him my unique story of how I got till here so that it find him interestin

I gave my intro

Told everything in detail about final year project

I am Karan Singla, a final-year Chemical Engineering student from Patiala, Punjab, a city rich in history and heritage. I have com
internships outside my core domain, which have provided me with valuable experience in team management and meeting dead
my research focuses on the conversion of carbon into single-walled carbon nanotubes (SWCNTs) and developing their compos
material properties.

I have written code in an online C++ compiler. Logic was to divide the minute by 5 and find the absolute difference between hou
time. I forgot to take the movement of hour hand in between that hour. Although my answer was not entirely correct, I have give
solution.

i will try to go and talk to them about what is the issue and if it is on my part i will try to resolve it and even after doing that this p
the issue to the notice of the higher authorities
In my HR Analytics Dashboard project, I analyzed attrition trends using Power BI and Excel. Attrition occurs due to multiple fact

1. Salary concerns – Employees leave for better financial opportunities.

2. Work culture issues – Certain departments have a higher turnover due to unfavorable work environments.

3. Age group impact – Younger employees switch jobs more frequently for career growth.
 cin>>n;

int a[n];

for(int i=0; i<n; i++)

{
cin>>a[i];
}

sort(a,a+n);

int ans=0;
I explained howi>=0
for(int i=n-1; i can; i--)
use analytical thinking,problem solving skills for the role.
{
ans = ans*10 + a[i];
}

cout<<ans<<endl;
My answer was none, Correct answer was Indira Gandhi.
}

A brief introduction of yourself ,internships ( if done),your field of expertise.

Just give the introduction with out stuttering

introduced

Detailed intro but not too long.

Revise all your mentioned skills in the resume and be prepared how to explain mentioned projects in the resume, re ise importa
and approaches

Manufacturing role in SCM is an integration of management and technical role. I believe that I can apply ,whatever I have learn
the fullest whether it is my communication and leadership skills or my technical knowledge and industry experience.
The interviewer gave basic guidelines about what to include in the answer. But always have a script ready that includes all your
interns, this is the first question and you can steer the interview in whatever direction with it.

Worked in Industrial design, Interior design and commercial architecture mostly

Explained my project and told how it affected their company

Process of mixing and fuel so as to form a combustible mixture

Has 2 parts, 1 at exhaust another one at intake. Powered by exhaust gases, increases intake air pressure.

In VCR, we use compressor, where as in VCM, we uses a absorbent, pump, and generator. VCR is mechanical energy driven s
thermal energy driven system.

Answered what I have did in my internship and answered that my project that I have completed is in working state .

I have gave normal self introduction

Analog circuits
I understand that my CGPA may not fully reflect my abilities, during my studies, I focused on hands-on learning through various
on improving my understanding of key subjects and applied my learning in practical scenarios.

I tell my name, my home place, my current degree and college, my vocational training and my hobbies

For axial load, there will be uniform stress distribution and for transverse load, the upper part of the cross section will be in tens
one will be under compression

Design and analysis

"Good morning,
I’m Akhilendra Sharma. You could say my journey has been as dynamic as the structures I study! Currently, I’m pursuing my M
Dynamics and Earthquake Engineering at VNIT, Nagpur.
I come from a Telugu family but have had a rather nomadic academic life—studying in Bhopal, Hyderabad, and Raipur, followe
undergrad in Bhilai. Post that, I dived straight into the real world, working on a road project in a small village, Kaudiya, as part o
initiative. Later, I briefly worked as a site engineer in Ahmedabad before finally landing in the heart of India—Nagpur, the city w
marker. From here, I aspire to grow from zero to infinity in my professional journey.
Currently, my work bridges cutting-edge research and real-world industry applications. I’m working on a machine learning proje
advanced sustainable concrete materials, collaborating with a researcher from Gdańsk University of Technology, Poland. To ta
beyond papers and into practice, I secured a collaboration with a local concrete plant, ensuring our findings are industry-validat
Beyond engineering, I have a creative and introspective side—I sing, write poetry, and delve into spirituality. I actively volunteer
Living, an NGO focused on meditation and service, and will soon be a teacher, guiding others in meditation.
I4,enjoy
Starttaking on start
to finish, new challenges, learning
to start, finish continuously,
to finish, and
finish to start working
and start toinfinish
dynamic environments.
is used very rarely; explained it with proper diagram

Explained everything about its various units and its domain

NAME
AGE
BIRTHPLACE
SECONDARY AND HIGHER SECONDARY EDUCATION
UNDERGRADUATE
TECH SKILLS
TRAINING / INTERNSHIPS
EXTRA CURRICULAR
FAMILY BACKGROUND
1. Ordinary concrete
2. Standard Concrete
3. High strength concrete
Intro

I told them about my details and told them that I like Event management and mentoring, I like cricket and chess and my areas o
thermal sciences and Manufacturing.

I Explained them each steps of thermal power plant, step by step. Started with there are 2 processes taking place in thermal po
process and Coal handling process. It took me around 5-10min to answer these. I Explained it at minutes detailed ans specifica
type, pressure and temperature, type of fuels, water treatment chemicals, Electrostatic precipitators, Air bags, Induce and force
steam turbines, cooling towers,etc.

I gave intro, about my academic background, my family background, My PORs, my industrial experience, my final year projects
weakness. Why I want to join the EIL, hobbies.

A semaphore is a synchronization mechanism used in operating systems and multithreading to control access to shared resour
race conditions and ensures safe concurrent execution of processes or threads

Wrote the code for the above two questions in C++.

Told intro, education, internship, hobbies, goals

Initial setting time should be at least 30 minutes, and the final setting time should be no more than 10 hours. And then Vicat Tes
explained.

My name is Kumar Pushpam, and I am currently in my final year at VNIT Nagpur, pursuing B.Tech in Metallurgical and Materia
have secured an All India Rank of 509 in GATE 2025 in the Metallurgical Engineering paper.

I completed my 10+2 from Vivekananda Mission Vidyapeeth. Throughout my college journey, I have been actively involved in v
societies, including the Materials Society of my department. Additionally, I completed an internship where I gained valuable indu

I am eager to apply my knowledge in metallurgy and materials science to practical applications and contribute effectively to you
..

I explained my project IoT based Smart Farming System using Machine Learning in detail, in which I have used YOLO, AWS, O
Studio and Raspberry Pi. I explained each and every technology which I have used step by step.

MATLAB

My project is about solar tracking system and explained them the whole thing and ways of improvement

Suggestion:- Give at least 5

In a family tree of many generation (a large number of), in which firstly there were two children were there initially ,if we establ
between male of first child whole family to the females of second child , we can finally calculate the number of total female child
family if we have already an idea about the number of males in first child family by using some mathematical concept regarding

Just give your simple introduction and explain the projects briefly on which you worked in your internships and also your tech st

I explained my core project -power optimization using solar tracking system

I have prepared my intro before the interview

Myself, my final year project, my strengths

I summarised my resume.

Condensation of an aromatic aldehyde(without Alpha Hydrogen) with an acid anhydride in the presence of a base, typically the
potassium salt of the acid of the anhydride.

Depend on riddle asked

In my project explanation, I outlined the idea and motivation behind the work, detailing its objectives and relevance. When aske
MySQL tables to identify employees in the CS department with salaries exceeding 10,000 rupees, I proposed using a LEFT JO
employees from the relevant tables, ensuring matches from the CS department are retained. Then, I applied conditional filtering
clause) to select only those employees with salaries greater than 10,000 rupees.

Howrah in West Bengal. In terms of family. I am the only child of my parents. My father works in income tax department and my
maker. In the academic front, I have done internship at Indorama Synthetics Limited and at Hindalco Industries after my third ye
one after my second year. In terms of hobbies I would like to say that I am a avid cricket player, I have represented my institute
have also explored the leadership side by being the Department representative of our department at VNIT and I am excited for

Srusti which means to come up with the idea that works.

INNER JOIN: Returns only matching rows from both tables.

LEFT JOIN: All rows from the left table + matching rows from right (NULLs if no match).

FULL OUTER JOIN: All rows from both tables, with NULLs where there's no match on either side.

My introduction ,interests and family background.

I made an E-commerce website and added a payment gateway. Payment gateway made the project look complex and handy. I
how fascinated I was seeeing E-commerce sites sites Amazon etc and I wanted to learn implementation of it so made this proje

My self introduction including education, internship and project

I presently haven't decided yo start a startup. But if I plan to start one I will work in the domain of deep learning. I will see which
service has a small gap in it which can be fulfilled by a DL model, I will try to develop something with this thought process.

I developed a chrome extension which helps to track your time and categorise it to productive, distractive, spam mail prediction
instagram

Provided them with logic to solve the question.Its ok if you do not proveide them with specific numeric value .

Workability of concrete refers to how easy it is to mix, transport, place, compact, and finish the concrete without segregation (se
ingredients) or loss of uniformity.
2.) Question asked by interviewer ?

Asked to show one project from portfolio

Experience about internship

What is your project

NA

Will you be available on call from 7pm to 12am ?

For my first project what is your contribution in that project

What is thermocouple?
How was your experience in the technical round?

why you want to join this company?

Explain me any one of your Projects mentioned in the Resume

Tell about academic background

About internship

Why did you choose Chemical Engineering?

Difference between REST and SOAP Apis and their output format. Which is used generally.

what is the maximum strength of concrete that is used in the construction sites in todays scenario?

Related to Search Engine Optimization, How and where you have implemented it.
If you have to sell a pair of shoes online, how would you approach it using Search Engine Optimization (SEO)?
write code for moving all the zeroes to end in a given array.
input : nums = [0,1,0,3,12]
output: [1,3,12,0,0]

Projects about Data analysis

Types of Filters (Technical) (extension of my resume project)

Pillars of oops

Why GAIL

Explain Mohr columb failure theory

Explain about your completed internship.

In HR they asked like, for same role we also interviewed a person in IIT DELHI and he has good cgpa than your and
now tell me whom should we hire?

Tell a unique quality which makes you different than others.

Strengths and Weaknesses?

Have you done any landscape work?

From FYP, any technical term related to your topic maybe asked.

What is the compression ratio?

Working of Catalytic Converter

What happens in SSLNG power plant?

Why you choose this college far from your state ? There is one nit in rajasthan too.

Tell me about your project

How many terminals are the in Transistor

Questions Based on my Projects. Asking about the testing device you used. Software used etc

What you know about vedanta

What is the nature of stress strain curve for mild steel? How does it look like?

What is diseal engine

You are from structural background so why sales?

which method is used to design RCC structures?

Why i want to join vedanta

WHY VEDANTA AND WHY MINING

What is the meaning of M15 concrete?

Previous internship

Favourite subject in thermal sciences, and they will ask you about that subject's essence and how it transformed
through the years an why is it your favourite?

Then they asked me about Heat recovery plant?

What do you know about welding, what is inert gas welding, which inert gas is used, and what is its purity
percentage?

Explain Android Architecture

Given a student table, return the student with second heighest marks.

Concrete definition

What is the need of Slump test?

Share your internship experience

Differences between pump and compressor

Which is your favorite subject and why? What is Erosion and Dilation(According to subject you told).

Make a simulation for a given problem where a fan will turn on if temperature is more than 36 and will turn off if
temperature is less than 26.

How do you stay updated with latest technologies?

Tell some reaction occurs in hot metal during refining

If I was not selected in that interview than what I will look for?

Solve a DSA question in an online compiler by sharing your screen.

What challenges did you face while doing the project and how did you overcome it and what improvements can be
done in your project?

About projects
Core based (which subject I like)?

Why is your CG low?

RDS in Cannizarro's reaction.

Introduction

DSA question which how you find the k element from last in linked list if you don't know the end of it.

Why are you excited?

Final year project

If accuracy is 98%, is the model good? Why or why not?

project based

Why radiant ?
Dsa questions based on tech stack of projects in my dsa projects

questions related to SFD and BMD

Which all programming languages have you used and what kind of projects have you developed?

Questions based on cycle detection of Linkedlist

What is venturi meter ?

WHAT IS WATER TO CEMENT RATIO

Answers given by students.

Explained that project

I told about my internship experience, which was actually good

Gave them rough idea about my project

NA

Yes

I answered whatever I did for my project

Two metals or wire with different temperatures creates potential difference and it's called as thermocouple
The process was smooth and efficient. The questions were clear and concise, and company officials were always available to a
issues during the test.

I have good command in core concept , i have to do job in core sector only etc.

I explained him the project mentioned in my resume. Make sure to choose that project in explanation whose cross-questions yo
confidently. So, prepare at least one project nicely covering all the topics. I said it for 1-2 minutes, you can extend it if comfortab

I shared them my cgpa and my projects

I chose Chemical Engineering because I love problem-solving and transforming raw materials into useful products. It’s a dynam
diverse opportunities in energy, sustainability, and innovation.

REST for public and returns the data in XML or json format. SOAP for private uses and returns data in only XML format.

M120
1. Meta Tags – Adding relevant title tags, meta descriptions, and keywords like "Best Running Shoes" or "Affordable Sports Sh
improve search rankings.

2. Semantic Tags – Using <article>, <section>, and <header> to improve content structure and enhance SEO.

3. Image Optimization – Using alt attributes with descriptive text like "Lightweight Running Shoes for Men" to help search engin
images.

4. Page Speed Optimization – Ensuring fast loading times by optimizing images and using lazy loading techniques.
 for(int i=0;i<nums.size();i++)
{
if(nums[i]==0)
{
continue;
}
else
{
nums[indx]= nums[i];
indx++;
}
}

for(int i=indx;i<nums.size();i++)
I did projects
{ on EXCEL,SQL,Powerbi.Explained regarding them.I only did dashboards,They asked what did analyse from the d
nums[i]=0;
}

Analog and Digital, Subset of Analog (Passive, Active, Hybrid), Subset of Digital (Kalman, FIR, IIR, etc.).

Encapsulation, abstraction, inheritance, polymorphism

Tackle this question by connecting it with your final year project or your aim. You can also add your personal choice

Explained

Details of my internship, along with my role, project completed during the internship and problems faced during the internship.

Here I said about my skills and justified how persistent I am, like this try to justify yourself with comparing to that IIT DELHI pers

Since, I am an artist as well as an engineer, I believe that I have a balance of emotional and practical thinking. Due to this, I ofte
decisions.
Be genuine with your answer and have a script ready. Also with each quality, have some story or incident or habit to back it with
the interview is actually a conversation between two people, it is not a viva.

No

Interviewer asked my about turbocharger working, i explained it with detail

The ratio of the maximum to minimum value during compression i.e vol when the piston is at BDC to TDC .

Heats up with exhaust gases, then burns unburnt hc before expulsion from exhaust.

It is a small scale liquified natural gas where we converts CNG to LNG by cryogenic operations and pressure variations.

I want to be independent and after coming here I have learned lot of things such as money management and many more

Alkali activated concrete by using coal mine overburden as a replacement of fine aggregate

BJT-3, MOSFET-4
-

I tell everything like chairman, CEO, leading integrated producer of zinc, lead and silver.. First company in India to produce carb
aluminum,only company producing nickle in india, vedanta global expansion, vedanta 7 pillar etc

Explained the stress strain curve

Explain all step

I explained how throughout my education and work experience I was involved in inter personal roles and excelled in them

Limit State method and explained this method

Explained about my future Goals which is fulfilled by joining it. It enhance my leadership skills

CONTENT FROM PPT + THEIR WEBSITE + (WHY MINING : SUBJECTIVE TO INDIVIDUAL)

It means Characteristic compressive strength of this concrete's 150 mm cube at 28 days is 15 N/mm^2.
.

I told them Energy Conversions is my favourite and explained it's transformation though the years and modern technologies like
Recovery, Biomass boilers, Engines and renewable energy sources.

Again I know how it works so explained it step by step.

1. I explained about welding, classified and sub classified welding. (2-3min)

2. Explained them inert gas welding, and told them the inert gas( neon or Agron)
3. I didn't knew about the purity, so I said I am unable to Remember, This question was just for name sake, to see how I will rea
would not know this.

Android architecture has five layers: Linux Kernel, which manages hardware and system resources; Hardware Abstraction Laye
hardware-software interaction; Android Runtime (ART) & Native Libraries for system libraries and execution; Android Framewor
provides APIs for app development; and the Applications Layer, where user apps run.

SELECT name, marks

FROM Student
WHERE marks = (
SELECT MAX(marks)
FROM Student
WHERE marks < (SELECT MAX(marks) FROM Student)
);

The need for a slump test is to assess the workability and consistency of fresh concrete and ensuring it's suitability for the inten
construction application.

I have shared the practical knowledge that I have gained from real time industry work.
How an organisation works. What things are necessary for the production and marketing of product.
..

My favorite subject is Computer Vision which allows me to work upon images and videos to get the insights i want. I explained b
processes along with mathematical working, pseudocode and practical implementation through examples.

Made and presented a simulation and code of the same.

By regularly following linkedin, techhub etc..

Suggestion:- tell all basic reaction

I answered that I can be a tutor in my hometown as my secondary teachers have offered me to do so in there coaching classes

Ask the questions to completely understand the question and discuss your approach while you code. So that they can understa
approach the question.

Continuous movement of the panel even for a slight change in the angle of incident rays which reduces efficiency,so we set a th
to stop unnecessary movements which cause power consumption
Improvement- Using photodiodes instead of LDR sensors

I have explained clearly about my projects

Steel making and iron making

As all students were full time students and could exclusively focus on studies, I was doing part time internship, freelancing, I wa
my website which had over 1.3 M impressions and exploring other opportunities, so it negatively impacted my grades.

Migration of H- ion to the carbonyl Compound without Alpha hydrogen.

Little about myself

It's a fairly straightforward medium-level DSA question. We use a dummy node and move it forward k steps. Then, we create an
starting from the beginning and move both pointers forward simultaneously until the first one reaches the end. At that point, the
pointer will be at the desired node.

Sir, whatever Praj Does, its innovative side. I always make sure that I learn beyond our expertise what I have learnt for these th
have a chemical engineering degree but I also learn more about that. What praj does I am very excited about that. The ethano
blending part and also the, By researching about the role I learnt about the critical equipment part, I have also worked in that, s
exlpre that as well.

Explained the project

Depends on the dataset (class imbalance)

In fraud detection (where frauds are 1% of cases), 98% accuracy could mean model predicts everything as "not fraud"

So use *Precision, Recall, F1-score, ROC-AUC

I spoke about the company and how my skill match the job description.
I had linked list as project tech stack so I was asked basic questions leetcode mediums like y point of linked list, palindrome link
coding. He asked me to code and explain each line on his code pad.

Drawn and showed SFD MD of sway frame

I have worked on C/C++, python. I use C++ for working on DSA problems and small projects which give me an idea of how Dat
are used in real life, like using dynamic programing to solve sudoku. I use python to work on my ML/DL projects.

I have given anseers according from bruteforce to optmised

A venturimeter is a device used to measure the flow rate of fluids, like liquids or gases, within a pipe

he water-cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
3.) Question asked by interviewer ?

About internship

What is the role of sunk ?

Things you learnt in the project

NA

How did you learn python as many universities don't teach python ?

My project related term like what is PWM

What is sensor ?
Are you comfortable working in a new place?

what are positives you heard about DAR?

Tell me the application of your skillsets mentioned in the resume.

Explain any 1 project in brief

Tell me about SQL query to drop the row

JSW being a metallurgical company, so why should we hire a chemical engineer?

Who is cm of Karnataka, Telangana

what are the different kinds of admixtures and how do they effect the performance of concrete?

Have you volunteered anywhere ?

What is state management in Reactjs

How many ads will be in a badminton match?

Explain all the projects, internships and club memberships and explain your involvement in them
individually. (Technical)

Project related questions

What do you know about GAIL

Most stressful situation in life an reasons for not choosing any other branch

Core questions. Survey, Instruments, methods, specific survey (plain table, theodolite methods)
etc.

In HR only, they asked like how would you bring an application working or rectify errors?

Why do you want to join Veedol?

Earliest exposure to lubricants?

Show your internship/ undergrad portfolio

Which bearing is used in turbocharger(again technical term)

What are the different types/colours of smoke produced by an engine,how will it vary with
different fuel air ratio.

Why CGPA is low?

What is the pressure of CNG?

Why your cgpa is low ?

What is your favourite subject

Types of amplifiers and what type of feedback is there ?

what is 3db point and why 3db specifically used for filters.

Which is your favorite subject and asked question from it

What is the difference between the diagram of stress strain curve of mild steel and cast iron

Real life application of my project domain

Have you ever been into marketing?

Difference between quality control vs quality assurance

What are the factors which will increase rock fragmentation

DIFF BETWEEN BPRD ADN PILLAR AND LONGWALL

What is concrete? What is the ratio of cement sand and aggregate in M15 concrete? What is
TMT bar?
Final year project

Explain the complete layout of waste heat recovery system all capacities, temperatures, working
pressures of all the components involved in the layout.

They later asked me cement manufacturing process

What is heat exchanger?

where we use them?

What is 3NF

What are ACID properties and how do we achieve Atomicity.

Various Aggregate test and their detailed

How can we provide slope stability.

Core knowledge
Classification of pump

Which is your favorite coding language and why?

Do you know what is PWM?

Do you prefer teamwork or working individually ?

Major Impurities in hot metal

Am I looking for the kind of jobs like a teacher only or some other?

Have you worked in some team projects as in TCS you will be working in teams, and how will
you handle a difference of opinion on some decision between you and your other team member.

How do you stay updated with latest technology?

Dsa
Explain final year project?

Difference between Primary key and foreign key and I was given example and I have to identify
the type from it.

Aldol-Condensation is what kind of Reaction? (This Qs is MCQs type)

Explain your internship experience

If there are million entries coming in all day, how will you keep track of target sum in that stream.

You have interned at Hindalco. “ Reads the project from the CV carefully and narrates all the
points” . What have you learnt at Hindalco, Can you just brief me?

What do u know about eka ?

What is the difference between supervised and unsupervised learning, and give real-world
examples.and You're building a model, but it performs well on training and badly on test data.
What do you do?

Have you ever seen the design of heat exchangers in your internship or curriculum?
Puzzles asked

Design of footing and retaining wall types

What fo you understanf by NLP? ( This was in reference to a chatbot I developed during the
hackathon)

asked me questions regrading deadloks, oops, sql and non sql differences

How can we calculate flow rate ?

WHAT ARE YOUR STRENGTH AND WEAKNESS

Answers given by students.

Explained how it was

Plumbing fixture used in toilets

1. Consistency 2.Constant learning

NA

I have learnt it from club activities

I explain pwm

Sensor is the device which collects or senses the information or data.

I'm comfortable working in new places and open to new opportunities.

Many like good work culture,good carrier growthth,etc

I had mentioned VS code, MATLAB, GitHub, etc. so I told him where I was required to use
these applications and the reason of choosing this one over the other to convince him more.
Make sure you follow the STAR approach in answering every question. i.e., (Situation,
Task, Action and Result)

U explained my electronics project as company is related to electronics

Even though JSW is a metallurgical company, a lot of its processes—like ore beneficiation,
smelting, and waste treatment—involve chemical reactions, heat transfer, and process
optimization. As a chemical engineer, I can help improve efficiency, reduce costs, and
contribute to sustainability efforts like emission control and waste management.

Revanth Reddy for Telangana, Didn't know for karnataka

admixtures are chemical compounds that are added to concrete to enhance the desirable
properties and examples of it are cacl2 and gypsum and oleic acid.

Yes, I have volunteered in a college event where I was assigned a task to discuss the
marketing strategy of an EdTech startup. I chose UpGrad for my analysis and presented my
ideas along with relevant data and numbers. During this experience, I identified key
loopholes in their marketing strategy, such as areas where they could improve user
engagement and conversion rates. I proposed data-driven solutions to enhance their reach
and optimize their ad campaigns. This opportunity helped me improve my analytical
thinking, presentation skills, and understanding of marketing strategies in the EdTech space.
It was a valuable learning experience that strengthened my strategic approach.
State management eg. Redux toolkit and Zustand in React JS is the process of managing
the data that controls how a React component looks and behaves

Considering 3 sets in match with 6 breaks.Each break is of 1 min 50 sec excluding intro and
outro ,considering ad of 30 sec.There can be 4 ads in a break.So there will 24 per match.

Explained the said projects in brief, then explained my involvement in detail.

Study your resume thoroughly.

Go through the GAIL website and study it carefully. Try to remember the numbers that are in
thier website because starting numbers and facts helps us

Internit cricket experience

Explained the methods along with the instrument used and my lab examples.

I answered like, first I will analyse the situation and make notes on pen paper because half
of the solution lies in the writing problem clearly in the paper and find out the issue and slive
it. Like this I said how would I start from basic steps to higher steps

It is a leading manufacturer of engine oil and lubricants around the globe. Also, Veedol is
doing research in sustainable lubricants and I'm quite fascinated by the new project as I also
have a keen interest in sustainability.
Told him about bicycle and it's chain coming off. Related it with my internship and
emphasised on the importance of compressors

shown

Ball/roller

The smoke or exhaust gases produced can be of three colors mainly black ,violet,white.

Busy with extracurriculars like POR’s and other personal Ventures.

Around 200-250 bar

During my second year I was involved in many club activities and outdoor sports and also
went to inter nit that consume my maximum time and results in less cgpa.

Concrete technology

CE, CB, CE amplifier / negative feedback

half power point, refers to 70.7% of max amplitude

Rock mechanics and they asked about failure creteria... I tell everything about that in details

There will be difference in plastic region of the stress strain curve

Explained

Not in a marketing role officially but been at a position wheree it required to invite more
participants for a competition.

explained with exmples

Stemming, explosive used, drill hole length

(ANSWER ON TH BASIS OF STRATA CONDITIONS,ADV AND DISADV, PRODUCTION ,

PRODUCTIVITY, COST OF MINING, MACHINERIES USED FOR CUTTING LOADING
AND HAULING,VENTILATION,STAGES ETC..

Concrete is a mixture of Cement, sand and aggregate in fixed proportion. Ratio of cement,
sand and aggregate in M15 is 1:2:4.I was not given any information related to TMT bar
because i was not able to recall this at that time so i told my interviewer that "Sorry sir i
studied about it but right now i am Unable to recall.
.

I have done my internship at KCP Ltd Cement Production unit. So I had a good idea of WHR
system. I have explained them everything by drawing the layout simultaneously.

again explaining the very small details staring from Limestone mine, then to crushers and
further steps till the packaing legs, I explained it very well. It took me around 5-10min to
explain it on the paper.

I explained them about heat exchanger, classified it gave them example.(They wanted to
hear that "HE is a Energy saving devices"). Later I told them where we use it, Evaporator
and condeser in AC and refrigeration, In gas turbine cycle to increase the efficiency, In
vapour absorption cycle to increase the efficiency)

Third Normal Form (3NF) ensures no transitive dependencies in a database. A table is in

3NF if it is in 2NF and no non-key attribute depends on another non-key attribute. This
prevents redundancy and improves data integrity.

Explained about the ACID property and Shadow copy scheme to achieve ATOMICITY

One of the method is Soil nailing – Steel bars “nails” are inserted into the soil or rock slope
then grouted into place, serving as anchors that reinforce and stabilize the slope.

Ferrous metal extraction process and aluminium extraction process.

..

My favorite language is C++ currently but as I will be working on more languages in the
future along with machine learning, I will be using python quite often so maybe in the future,
it will be Python.

Yes, It stands for Pulse Width Modulation and it is a technique to control switching of power
electronics switches.

I prefer teamwork.Insights of each individual will be involved in teamwork which helps in

better implementation and improvement.

Alumina, silica, CaO, MgO, CaF2

I am looking for the teaching job only.

Answer this question honestly. Since i haven't worked in a team project so i said that but
also explain if you face any such situation then how you will handle this.

By following technology newsletters,linkedin,Coursera platforms etc

The interviewer asked me 2 dsa esay to moderate questions since i mentioned it in my

resume
Told about mine project.

Answered

Addition followed by Elimination

Gave it to them in crisp manner

There are three obvious solutions. The first one uses memorization with a hash map —
similar to the classic hash map problems where we keep track of indices or values. As we
iterate and find a required sum, we simply return it. It's a variation of that approach.

Sir, at Hindalco. First of all, we were part of the GET group, where they introduced to the
continuous process. What Hindalco does at Belagavi is they produce alumina, which is
al203, for non-metallurgical processes which is used for catalyst. Wire bends etc. This was
fror initial two weeks, after that we were given a dedicated project. Mine was on Evaporators
design and maintenance scheduling.

Eka is EV manufacturing company under parent company Pinnacle Mobility Solutions

Supervised Learning: Data with labels U.nsupervised Learning: No labels, just structure.
Overfitting

I responded that i have studied the design of shell and tube heat exchanger.
I was asked puzzles such as 3 bulb, 5 ltr 3 ltr water glass. These are available on gfg.

design steps and reinforcement detailing

Natural Language Processing is a field of AI which helps us to make computers understand

language. We use work embeddings, tokenization, stemming etc to help our model
understand the intricacies of the dataset.

i answered accordingly

I stated them all the steps . U can get answer to this online very easily. As it is long I am not
writing it.

One of my key strengths is adaptability. I can adjust quickly to new environments and
challenges, whether it's learning a new tool, working with different team members, or
managing changing priorities. I also have a strong sense of responsibility .
4.) Question asked by interviewer ?

Anything you want to ask me?

What will you do about Rainwater harvesting for a sloping roof

Things you unlearnt

NA

Can you give me a brief feedback about the online assessment we

conducted

draw the circuit of your project and explain

What is hall sensor?

Are you comfortable with working with US timings and the two year
bond?

what negatives you heard about DAR?

He asked me a simple coding question like Write a Code to swap 2

number in C++

They asked to explain all components of project

Puzzles

Any sports and extracurricular activities participated through your college

journey.

Why do you want to join Winjit

In a certain scenario where in a point of your career you come across

two paths one that will give you personal gains and the other would help
the company grow. so what would you choose and why?

Some Technical questions related to Microsoft Excel such ad Pivot

Table, Macros, SumIfs, CountIfs and Lookup functions
Pillars of Oops

What business will you setup in Nagpur?Badminton courts or Pizza

place.If you have a capital of 10 Lakhs.

Why were you unplaced till this time ? (HR)

How would you connect database to website in dotnet framework?

Explain about your final project

explain Triaxial test in detail and it's significance

If you were to choose anyone between your hobbies what it would be?

Why we should hire you?

If we do not find you up to the mark and fire you later, what will you do?
What kind of role would you prefer?

what is the curved edge on a stair called? (ref image shown)

Family Background

What is BHP and IHP and its relation

Details about personal ventures(in my case my band).

Difference between Sl and Cl engine? Draw the otto, dual and diesel
cycle in P-V diagram?

Are you ohk with any job location ?

What is Segregation and Bledding

Difference between +ve and -ve feedback and routh hurwitz criteria
what is the main difference between a microprocessor and
microcontroller.

Now they give me a bench height - 11 m and asked me to tell stemming

and sub grade drilling

What are the properties of mild steel?And which material will you prefer
mild steel or cast iron?

Asking about shear force diagram and stress distribution on cantilever

beam when force is applied at the end in axial and transverse direction.

Family background

draw network diagram and explain

Difference between surface and underground mining

DIFF TYPES OF HAZARDS IN UG MINES

What is Venturimeter ? After this they asked What is Bernoulli's

Principle? What is Archimedes’ law? they had given me one question to
draw S.F.D. and B.M.D of a simply supported beam in a paper?
Technical questions

You said you like cricket and you watch it alot. Do you about
Mankanding and do you think is it ethical to do. Will you do Mankand if
you get a chance?

Then they asked me about my next internship in FIAT, what you learned
from it what where the 3 safety measure carried out while working in any
industrial areas.

Telle about cooling tower? They didn't expected I would know this

What is Services in Android

Difference between Python list and numpy array.

types of dam

What is the density of steel, Concrete and brick?

Family background
Automatic transmission vs manual transmission

Perform any one of the code with respect to the language you answered
earlier on online compiler.

Do you know what is ADC and how can you find the resolution?

When one of your team members is not able to complete their part in the
assigned project.So how will you as a team leader get the project done ?

How and why to do OM and SEM

am I comfortable to stay in Maharashtra so that if they recruit me, I will

not leave the institution early?

Why TCS ? Don't you want to work in companies like Google, Microsoft
etc ?

Do you prefer to work individually or work in a team ? And why ?

Final year project

Hr question:- how many members in my family

Project related questions

No. of electrons in 16gm of Ch4 ?

Case study discussion

There was a theoretical question about the use of NoSQL databases —

specifically, their advantages — and another question on the concept of
WebSockets.

Okay Evaporator design. What do you understand by Evaporation?

What you are most passíonate about ?

You are given a dataset with 50% missing values in a column. How
would you handle it and still extract value from the data?

What are the parameters that are required for design and what you get
at the end of the design ?
What are your strengths and weakness

Mtech project

A medium level question on linked list.

Asked me about UBS and its functions

Where do you see yourself in next 5 year ?

ARE YOU COMFORTABLE TO WORK ANY WHERE IN INDIA

Answers given by students.

I asked about how they onboard their clients

Explained it about how it works

Same answer

NA

I have given them my experience of the assessment, which was conducted in three rounds with
each round as elimination first two rounds are python coding questions and then last was a
feedback on the generative AI prompts

I draw and explain each term

When metal sheet or plate connect to potential difference with influence of magnetic field,
postive charges and negatives charges are separated and collected to either side of metal sheet
or plate results into generation of potential difference.
Yes

No as such

As the interview was supposed to be on core topics, it was surprising for me that he asked me a
coding question. The coding question was asked because I had mentioned CSE Minor in my
resume, so you should be prepared for every single thing you mention in you resume.
So here I fumbled initially, I thought of giving the perfect answer, but was unable to recall that
one code, so after a minute of thought (which I think I took longer after the interview) I told him
the brute force approach and he agreed and went on to the next Question.

Main component we used was 555 timer IC

So I explained everything about that timer and few other components

I organized the AI Hackathon during Axis and Hallabol in Aarohi, gaining hands-on experience in
event management.

I come with a combination of tech and problem solving skills. Also I tend to perform better in
team projects and when under pressure. I would add value to PredictSense(AI product of Winjit)
and also work towards the company's vision.

I choose the path that would benefit the company because though employees make a company
the company is the one that shapes these employees so i would like to keep the interest of the
company first rather than my own interests.

I shared my experience of using these functionalities in Microsoft Excel projects, demonstrating

their importance in data analysis and reporting.
Abstraction, Inheritance, Polymorphism, Encapsulation

Badminton.because I have played badminton regularly and know what varaibles i have take care
about.When it comes to Pizza place,I have no idea regarding any varaiables or network.

I was looking for companies which piqued my interest and hence the companies I applied for
were less than what is expected.

Through connection string in web config.

Make sure that you know that in and out of your final year project and the topics related to them

explained as per the subject

Badminton as it requires full body same as in football and mindfulness as on chess.

Here justify yourself with the all the technical and soft skills and relate with extracurricular
activities like clubs in the college

I'll respect your decision and ask you what were the skills that I was lagging in. I'll take the
criticism positively as everything happens for a good reason and improve myself.
Answered the same

nosing

Self explanatory

BHP is the is the actual, usable power output of an engine measured at the engine's output
shaft, after accounting for internal friction and other losses,and IHP is sum of BHP and the
Frictional Power.

Gave details about my band like what we do, what i do in the band etc.

In Sl we uses spark plug but Cl is compression ignited. SI engine is for petrol and Cl for diesel.

If choice will be given to me I will choose accordingly otherwise I am ohk with any location.

Segregation is separation of all concrete ingredients and Bledding is separation of water from
concrete mix

+ve feedback decreases stability and -ve feedback increases stability. Routh Hurwitz criteria is
use to find stability of system.
in microprocessor requires RAM ROM and external I/O components, whereas Microcontroller
has RAM ROM and I/O pins in built, but the size of RAM ROM is small hence Microprocessors
are used vastly in computers, and microcontrollers are used in fixed function devices

Stemming is 1/3 of bench height and subgrade drilling is 1/10 of bench height.. 3-4 m stemming
and 1 m sub grade drilling

Told about the strength of mild steel and mild steel will be preferred

Explain

Father is an accountant at CSIDC mother is homemaker and elder sister who has pursued MSc
Genetics and plant breeding but currently not working since she conceived a child recently.

explained critical path, different float

Support and ventilation

FIREDAMP EXPLOSION
COAL DUST EXPLOSION
INUNDATION
ROOF FALL
PILLAR BURST
During my interview at this question I was forgot the information related to Venturimeter but when
they asked About Bernoulli's Principle the answer came to my mind that it is related to Fluid
mechanics It is stated that "In a closed conduit during flow of liquid Sum of pressure head
velocity head and datum head is constant. Related to Archimedes’ law i was forgot the bookish
language so i explained
"Apparent weight = Weight of object (in the air) – Thrust force (buoyancy)" this formula which is
related to to this law , in my own hindi language.
.

It's completely fair and ethical because it is clearly mentioned in the rulebook of cricket. The
mistake is of the non-striker who has neglected to see if the bowler has completed his action or
not and he crossed the crease. It's completely with in the rules and it is ethical in my perspective.

1st part: Rough explanation on what is the plant is about, what are the areas of the plant,
namely, Body shop, Paint shop and Assembly shop. Then I went into details of assbly shop.
There was no cross questioning in my case, instead of that I was asking them should I go into
deep or not.
2nd part: I told about the green line which are the walking lines, Using PP kits like helmet, shoes
and other protective equipments.

I explained, They are 2 types of cooling tower, Natural draught cooling tower and induced
draught cooling tower, then the working of each type, where are they use, etc.

In Android, a Service is a background component that performs long-running operations without

a UI. It can run indefinitely or until the task is completed. There are three types: Foreground
Service (e.g., music player), Background Service (e.g., fetching data), and Bound Service (e.g.,
client-server communication).

Python list can contain values of different data types, but numpy array must contain all the
elements of same datatype. Also numpy array is faster for large numerical calculations.

gravity dam, earthen dam

The density of steel is approximately 7850 kg/m³. The density of concrete can range from 2200
to 2500 kg/m³, while the density of brick can range from 1600 to 1920 kg/m³.

I have shared my family background and profession of my parents.

..

I performed C++ code of finding Prime number when user enters any number, that number of
prime numbers will be printed. I coded on Programiz Compiler. My code showed correct outputs,
with proper explanation at each step and proper comments wherever required.

Yes, it stands for Analog to digital converter. It is used to convert analog signals to digital signals.
Resolution can be found out by dividing the range of input by 2 to the no. of bits the ADC has.

If there's much time left and If I can complete the project by myself then I'll finish it.And if there
are any time constraints then I'll explain the situation to my team members so that we as a team
can complete the project within the deadline.

To see microstructure by using visible ray(in OM) and electron beam (in SEM)

I have decided earlier that I can live in Maharashtra for my further work so I have applied for this
job.

Yes when i decided in the second year that i will be moving forward in software development
field then my aim was these product based companies like every other student. But later i
realized that since my branch is metallurgy therefor my chances of getting into these companies
through off campus placements is very less in current job market situation. So for me at this
stage it is important to get started in for which service based companies like TCS etc is also
good. As i gain experience then later no one will ask me my BTech branch and everything will be
judged based on my work experience. That's why TCS is a good start for me and i will love to
work in exciting projects and improve my skills.

I prefer to work in a team

Reason- Insights of every individual will be added giving the best output

He also asked about my final year core project

Given answer

Answered

The number of electrons in \(\text{16\ gm}\) of electrons is approximately \(1.756\times 10^{28}\)

Answered as per case study

It was mostly theoretical — the kind of information you can easily find on Google — but tailored
to the tech stack I had used. We discussed in detail how WebSockets can be leveraged to
update media in real-time and continuously push updates to the backend while saving them as
well.

Sir, by evaporation we understand that it is boiling before boiling temperature is achieved. So

what we do

Technology and turning problems into business solutions

Check if missingness is random or has pattern.

Use domain knowledge to impute (mean/median for numerical, mode for categorical).

Consider feature engineering like "was_missing = 1".

Or use models like Random Forest or XGBoost which handle missing internally.

Spoke about kerns method in detail.

I answered my hardworking ability as my strength which lets me work hard relentlessly and
overcommitment as weakness. Be very clever about weakness part as they can counter it
vaguely.

Explained in Detail

Practice topics from Leetcode

answered accordingly

This answer vary person to person. MY ans - I see my self give my 100 percent for the growth of
"Shree cement " by gaing experince in comapy as well providing guidance to new joiners.

YES
5.) Question asked by interviewer ?

Are you hardworker

How many toilets for these many students?

When are you ready to join

NA

Are there any questions for us ?

What if you chage your supply from dc to ac what you need to add extra

Types of actuators
Do you have any questions for me?

Have you talk your senior about DAR? what they say?

You seem to be interested in both domains(IT, Core) as you have mentioned both in your resume. So, if we gave
an electronics project to you or a Coding project, what will you choose, you seem to be more inclined towards the
IT domain?

Also explain about any other project in few lines

How do you handle a loss in sports?

5 frontend and backend technologies

if there is a scenario where you have been assigned a project and when you reached the site the work was going
on and you were told that the MD of the company would be visiting it shortly but when you saw the condition of
construction the materials were in poor condition and the quality was not up to the mark then what would you do?
This thing can make people to lose their job so how would you react would you rat them out or would you try to
save the project?

Number of advertisements appeared in IPL matches and logics behind it to check the guesstimate numbers and
thinking ability
What is an API

What variables will you check out when you setup badminton courts?

Have you completely understood your job role and are ok with it ? (HR)

How would you use AI for your projects.

What are the essential conditions that are required to maintain the stability of the grid while integrating the
renewable energy system

Brick testing, concrete testing, Different tests, specifications, results and conclusion as per results

Any leadership position held or any similar work done?

Last HR question is, how would you rate yourself in 1 to 10?

Why did you choose Chemical Engineering?

Any questions for us?

Are you open for all locations around India?

Your achievements in 4 years of college

Why did you take this final year project based on Biomechanics?

Do you have a Girlfriend?

Difference between gaskets and mechanical seal ?

Tell me about your fyp project?

Are you ready for doing job anywhere or not?

What is FSM and how may bits required for 10 states ?

What is VSWR, what are S parameters, which S parameter denotes reflection coeff

Tell me your strength and weakness

If want to do mass production of an product, will you use 3d printing (additive manufacturing) or the conventional
methods for manufacturing?and why?

Favourite sports and role model in that and also one quality that in sport being related to in profession carter.

Project discussion

what is development length?

How your strengths wil benifit to our company

SECTION 22 OF MINES ACT

What is your goal in this job role?

Are u preparing for gov exam

Do you think Hydrogen can be used as a fuel?

1st questions then asked me was, tell me which part of thermax ppt which attracted you the most.

They 1st questions they asked me was about my Final year project which took the most of the time.

What is Toast in Android

What is transformer and what is the architecture of Vision Transformer.

weight of steel from diameter

What is the weight of 20 mm dia bar?

Hou you see yourself after 5 years from now?

Significance of moment of inertia

Why do you want to do Internship in this company?

What would be the count if an 10 bit - ADC is having 0-5 volts operating range, and input signal is 2 volts?

Why do you think you are fit for this role ?

What we see in the microscope

Have you appeared for placement drive that happened earlier?

if yes, what were the result?

Are you comfortable to work in shifts ?

If one of your team members could not contribute to the work and the deadline is tomorrow
Then as a team leader what will you do ?

Hr based situational questions

Any questions about the company?

Internship related questions

Dipole moment of 2,4-dimethoxybenzene ?

Sql query

In the machine coding round, I was asked to build a system that converts long URLs into short ones — similar to
how Bitly works.

So what you are saying that in Evaporator, boiling does not occur.

How can u contribute to eka ?

In SQL, how do you find duplicate rows based on a combination of columns ? and so on related questions ,
exceptional handling- probing qs

What do you plan as a career for the next 2-3 years?

Where do you see yourself in next 5 years?

Basic question from Transportation, Irrigation and Fluid Mechanics

A medium level question on trees.

senerio based questions and rank the following

salary, job role, company brand, location

What is Heat Exchanger ?

WHY NOT GOING FOR HIGHER STUDIES

Answers given by students.

Yes

For 4 students 1 toilet

1st June

NA

I asked them what is my role will be at the company, what will the company expect from me

I answered that we can use transformer and rectifer

Relays, motors, switches,etc

I asked about further career opportunities in the company.

Give answer honestly as per your talk

So firstly let me tell you the background first like why was this question asked to me.
So I had a CSE minor and it is mentioned in my resume and also during my introduction it may
happen that I spelled it multiple times and so he caught me there and asked this question. I think
that I answered it diplomatically, I said that I I think its a plus point for me that I possess
knowledge of both the fields and said that would make use of both to develop more unique
solutions.

I said about a project that I did in my schooling

I take it as a learning experience. I analyze what went wrong, focus on improving, and use it as
motivation to get better. Losses hurt, but they push me to work harder for the next game.

Frontend - HTML,CSS,JS(core languages), frameworks: React Js, Angular Js, Vue.Js, Flutter etc.
Backend- Python, Java(languages), Express Js, Node Js, Django, MongoDB, Flask etc.
I began by considering the match duration, which is typically around 4 hours per innings, plus
additional time for presentations and breaks. I factored in:

1. Innings-based ads – Ads appearing between overs in both innings.

Firstly i would try my level best to try save the project but if it goes out of my control then i would
try to reach out for help and standby maybe.
2. Strategic timeouts – Each innings has a strategic timeout where ads are shown.

3. Presentations – Pre-match, mid-match, and post-match presentations also include ad slots.

4. Fall of wickets – Whenever a wicket falls, an ad slot is triggered.

Using this breakdown, I estimated a number based on a structured calculation. However, the
interviewers kept introducing new challenges and conditions, making my number variable. They
continuously provided counterarguments, pushing me to rethink my estimate and adjust based on
different possibilities.

This made it a dynamic and tricky round, testing my ability to think critically, adapt quickly, and
defend my reasoning while remaining flexible.
It is an application interface with connects the client with the server to serve all the request of the
client.

1)Good area which consists of schools and communties.

2)Good electricity supply.
3)Sports supply nearby

Yes, I have understood the job role and am ok with it and also the location is suitable.

For the enhancement in project and adding new features. To know the short comings of a project
and how it can be made better.

Synchronisation of frequency, maintaining same voltage level, polarity, fault ride through
capability.

answered as per IS code specification

My role in various clubs along with explanation.

I said 10 out of 10, because I am confident and I believe in myself first. Why I should under
estimate myself, like this I said .

They were very impressed with this answer and being this last question it made a good
impression on me.

While filling up colleges and branches in JOSAA counselling, I researched a lot on internet and
found that Chemical Engineering is a field which opens a lot of sectors to work for like, Petroleum
industries, paint industries, Pharmaceutical industries, Research. In fact this is the discipline
where we can work for defense sector, cure patients by making medicines and publish a good
research paper in a single life.
Research about the company and asked informed questions around it.

yes

Self explanatory

The project was assigned to us .Also being Mechanical Engineer it won't happen that any system
which is given to us to work upon would be completely Mechanical,it will always be combination
of electrical and real life things so we always have to deal with things in same way.
Hence this project which is combination of Mechanical,Electrical and Biomechanics has helped
me to apply all these concepts

No.

Gaskets are used between flanges or two mating surfaces. It is type of mechanical seal.
Mechanical seals are used for leakages and applied between two rotating surfaces.

I have explained the same

Yes

finite state machine and 4 bits.

VSWR Stands for Voltage standing wave ratio it indicates degree of impedance mismatch, S-
parameters are used to characterize how signals behave in antennas, S11 denotes reflected back
power.

I tell my strength and weakness

Convectional methods for manufacturing, because of its economic feasibility

Table tennis

I am working on a machine learning project for prediction of properties of advanced concrete

materials in collaboration with a researcher at Gdansk University of Technology, Poland.

Development length (Ld) is the minimum length of a reinforcing bar (rebar) that must be
embedded or anchored into concrete to ensure that the bar develops its full strength and prevents
slippage or pullout under loading.

Explained about my management skills and my knowledge in core domain

NA

My answer-
Firstly i want to learn the job and i want to improve my managing skills so that i can lead some of
the projects after few years.
.

Yes. During my internship at ISRO I have learnt that Hydrogen is used as a fuel in the liquid
rocket engines. It is burnt with help of an oxidiser( liquid oxygen in this case). Both are kept at
cryogenic temperatures. Hydrogen has the highest calorific value and it gives maximum thrust
force. Now a days every space organisation like NASA and ISRO etc are preferring Liquid rocket
engines over Solid rocket motors.

I had researched each and every project mentioned in the ppt, I had recorded the ppt at the very
beginning, so It was easy for me to explain them, I told the my perspective about the company
after seeing the ppt. I also mentioned 2-3 cases studies mentioned in the ppt, along what actually
is thermax all about.

As I was explaining them about my final year project, they seemed pretty interested about my
project so I asked them should I explain then on paper. They allowed me it took me around 5-10
min to explain it properly

A Toast in Android is a short-lived message that appears on the screen to provide feedback to the
user. It automatically disappears after a few seconds and does not require user interaction.

Explained about the transformers and their use cases and also explained about the
VisionTransformers architecture.

d^2/162

Density of steel * Volume of steel

I will be in a leading role in operation and marketing department of firm after 5 years.
..

I have studied their company recent projects and future projects so I mentioned 3-4 of the projects
of the company along with the technologies which I have also worked upon.

First finding the resolution and dividing input voltage by that resolution will give the count, the
count is 409.6 but it will show 410, as this is quantized value and 0.4 is the quantization error.

Being a student mentor, I find it interesting to interact with new people and the role which I opt for
is consulting. The goals of this role aligns so close to my mentorship.So I'll fit better for this role.

Microstructure such as ferrite and cementite in mild steel , spheroid etc depends on the material

Yes sir I have appeared in one on campus drive, I have cleared the online written test but
unfortunately i was not able to clear HR interview.

Yes

I'll explain the situation and tell them why the person couldn't contribute to the work. Making them
understand the emergency and explain them how much their contribution means to the team.
I'll prioritise the tasks and assign work accordingly at which they are best.
As the work is divided among everyone we can promisingly complete it before the deadline

I have answered them by explaining the scenarios

I asked my question.

Answered

miu>0

Answered as per my knowledge

It was a long discussion on how to implement the system. I proposed creating an HTML page
where users can input the long URL. On submission, it hits an API endpoint. On the backend, we
can use a hash map where the key is the short URL (e.g., https://bit.ly/refid) and the value is the
original long URL. The refid can either be a simple incrementing counter like /1, /2, /3, or we could
use an inbuilt UUID function to generate a unique string for each entry.

Sir, in evaporator, the boiling does occur. But it takes place below the boiling temperature, that is
the work of the evaporator. So, in this case what we do is we concentrate the solution, we
concentrate the feed, so whatever solvent is there which as water in this case, it is evaporated
and we get a concentrated feed, which is further used

Skilled in IoT , AI/ML and contributing positively to the organisation...

SELECT name, dob, COUNT(*)

FROM users
GROUP BY name, dob
HAVING COUNT(*) > 1;

and so on
probing questions !

I said , since I am a fresher I am looking forward for industry experience and learn as much as
possible and design has got a lot of scope in the industry so designing is what i would like to stick
for sometime .
I answered it cleverly by saying I'm just entering the corporate world and i want to make
connections as much as possible with brightest of minds. I would also love to lead a major project
under me with bright minds working under me.

Answered Basics

Practice topics from Leetcode

1.role,2. brand 3. salary, 4.location

A heat exchanger is a device that transfers heat between two or more fluids

Right now, my main focus is on gaining practical experience and applying what I’ve learned in a
real work environment.
Difficulty Level

Easy

Easy

Moderate

Easy

Easy

Moderate

Moderate

Moderate
Easy

Moderate

Easy

Moderate

Easy

Moderate

Moderate

Moderate

Moderate
Moderate

Moderate

Easy

Easy

Moderate

Moderate

Moderate

Moderate

Easy
Moderate

Easy

Moderate

Moderate

Moderate

Moderate

Moderate

Moderate

Moderate
Moderate

Easy

Moderate

Moderate

Difficult

Moderate

Moderate

Easy

Moderate
Moderate

Moderate

Easy

Easy

Easy

Moderate

Easy

Moderate

Moderate
Moderate

Easy

Moderate

Moderate

Moderate

Moderate

Moderate

Moderate

Moderate
Moderate

Moderate

Easy

Moderate

Moderate

Difficult

Difficult

Easy

Moderate
Moderate

Moderate

Moderate

Moderate

Easy

Moderate
Additional Feedback (What skills/knowledge areas were most tested during the
interview?)

Basic communication and core

Honesty, attitude

On site experience

Nothing. Just a simple HR interview

Python

They mostly tested our Python Knowledge , problem solving skills ,and observation skills

My core knowledge

Electrical, electronics and measurement core.

The interview was just a simple 5 minutes HR interview. The technical test that preceded it was f

Structural Analysis, Bending moment Diagram,RCC, Steel,Soil Foundation

Communication Skills, Interview should be engaging, Resume Projects

My projects

Speaking skills, SQL

Communication skills
On-point or critical thinking
Pressure Management

Dsa, resume projects, OOPS, DBMS, APIs

In depth Domain knowledge of the favorite subject, Critical thinking, problem solving skills, communi

Critical thinking, Project Related, Situation Based, Number Guesstimate

Basic Data Structures ( arrays, strings), Concepts of OOPS, Web development.

SQL,Excel,Powerbi,Situational Questions

All the skills mentioned in project description.

Technical skill and communication skill

Electrical machines, switch gear and power electronics

detailed understanding of core subjects, test specifications, interest in engineering, internship

Core knowledge.

If you are appearing for technical roles, first understand every word in the resume and make an a

Industry knowledge, sustainable Engineering, Communication, Management

Communication skills and clarity of thought

They just wanted to check the type of work I had done

Clear your basics, you should be in a position to explain any thing from your CV, any technical top

No

Mostly core questions were from my previous internships and my PORs.

IC Engines, Thermodynamics, Material Science, Fluid Mechanics, Machine Design, Industrial

Management

Ece core , mangement skills

Your core area knowledge

Focus on communication and analog circuits.

Digital Circuits, Electromagnetic Field Theory, Analog Circuits, EDC, Communication

Patience and under confidence

Interview was based on the projects in resume and the core subjects related to project , then it
went on to the other areas

Not specific based on your project and intern it generally asked

They tested how I respond when under pressure. Constantly asking questions through which
they wanted to prove I am unfit for the position. Asking questions on my recent failures like not
being able to grap a placement till then. I responded with a smile calmly yet with confidence.

confidence and honesty was tested during interview

They will ask everything whatever is mentioned in your resume

MAKE SURE YOUR ARE AWARE ABOUT BASIC MINING TERMINOLOGIES

HAVE A BASIC IDEA ABOUT EVERY SUBJECT IN GENERAL

GO WELL PREPARED WITH YOUR TRAINING/INTERNSHIPS

EVERYTHING THAT IS MENTIONED IN YOUR RESUME MUST BE THROUGHLY KNOWN

BY YOU

Technical knowledge related to Concrete technology, Engineering Mechanics, Hydraulics

engineering, RCC , Project planning and management.
For environmental engineering water and waste water

1st round was based on your core technical skills they will test you on material science, thermal
science and strength of materials and they will ask you to explain your project works and in the
2nd round they will ask you about your internships and position of responsibilities what
challenges you have faced and how you overcame them.

They test's your observational skills along with your communication. Knowledge about a
particular topic. I was fully prepared about what questions they asked me.

My interview was schedule 2 days before, Just after the interview I was pretty satisfied and
happy with my interview, I explained them about everything they asked me. But today after 2
days I am not satisfied, because every candidates interview was good. They asked us the basic
question. They level of interview was not that high as it was expected. I am unable to under out
of this many candidates how will the select us. There were 4 panel member for PI but only 2 of
them asked me the question. I was ready for few more question, because they are calling us for
the interview process to Delhi and just 20-25 min PI cannot be used to judge the candidates.

Skills,knowledge mentioned in resume was tested only.

As my projects were mostly in ML and DL so they mostly tested me on ML and DL related

concepts.

know at least the basic about core subjects , and be polite

Most of the questions were related to concrete, steel, and cement, with a few focusing on the
FYP topic.

Communication skill, core subject knowledge

communication and technical knowledge

Mostly, they asked about the project because in a project, there can be many technologies
which are used and they also gives the interviewer an idea about the candidate's technical skills.

Basic understanding of tools used in software.

Soft skills and technical skills

Basic knowledge about steel and Iron making and Characterization

Application knowledge about the Subject ,Decision making ability.

DSA, JavaScript, Problem Solving

Communication skills and leadership qualities

Dsa,behavioral questions and that you have mentioned in your resume

Core knowledge of branch

Never speak lie in an interview. HR will catch you at the first question. You will be tricked in an
interview, only way to tackle is be prepared for any question.

Just keep your fundamental clear

Sql , Excel , communication skills

Data Structures, Algorithms, RDMS, Frontend, React and Cloud(little)

Technical, Communications & Leadership Skills

Overall skills required for a startup

Mainly SQL - Advanced , ML

Mostly technical knowledge related to the company product and mostly communication skills .
Be very specific about your project and don't answer something vaguely if u don't know. Dsa
skills and communication are the most important skills.

Project explination and civil softwares

Communication, Technical understanding of the project built.

DSA, OOPs, OS, DBMS

They asked easy question in Technical Interview. So they just were focused on people ready to
work for them having decent skills.

TECHNICAL KNOWLEDGE
Any advice for future candidates?

Dont stress, answer in a structured manner.

Be genuine and honest

Don't worry about interview. Focus on clearing assessment

Work on DSA and Programming languages

Be efficient about yourself

Do your project honestly

Core knowledge is important.

Focus on core knowledge as well as explore things that are not taught in college courses

learn basics of structure.

For internships focus more on Communication skills and also believe in luck.

Make your projects atleast 1 related to pure core and 1 related to any programming or matlab

Do everything from basics

For the interview, stay composed and approach it with confidence.

Prepare well and also look for the questions from fellow interviewers that are giving the interview. The questions may be similar

Just try to be very good with 2-3 subjects and be through with every concept try to make the interview as interactive as possible

My advice to future candidates is simple—be honest and confident in what you present. Make sure that everything on your resu

It doesn’t matter whether your projects or internships are big or small; what matters is how well you can explain them. Focus on

Lastly, don’t compare yourself with others or feel pressured by what they have done. Stay true to yourself, trust your knowledge
daily practice questions of DSA and should have idea of which tech they have made project eg. if React then , they should know

Share only your skills and projects according to JD given.Make them precise as possible.

Don't overthink certain questions (mostly HR), and answer them slowly.

Be confident and go through your resume and projects very well in depth.

Start your interview preparation from the HR questions, then be thorough with the resume, projects, internships. And then go fo
And during interview if there is any topic that you don't know just accept it, if you nod that you know about it then the interviewe

prepare answers to prove your interest in job and company and in defence of your hobbies and interests

Only add those points in CV that you know and have knowledge about.

Never loose hope on yourself and be consistent in the preparation and most important never cheat yourself and your parents, t

Don't waste much time to prepare PPTs . They do not see it. Aldo, prepare a good speech on your internships. They will ask to
For chemical guys, give GATE. Campus placements are very erratic especially for chemical students. Try to maintain a high CG

none

Just be confident and don't be afraid of them, they will comfort you in case of nervousness.

Have rigorously asked questions on technical stuff

Be sure you can justify any of the negative points you have and focus more on your positives.

Do your internships and final year project honestly. In all my interviews, we discussed these things.

Be confident and don't get nervous. And most important don't lie in interview also don't write any inappropriate in resume that y
know.

Be prepare on your project subject and your favourite subject

Have strong command on 2-3 core subjects.

For core companies focus more on Digital Circuits, Analog Circuits, Communication, EDC

Don't write gate rank in resume

Do prepare your resume throughly and mainly the core subjects related to your project like strength of Materials ( in my case)

Prepare your resume most importantly your projects and interns

Be calm, confident, have a smile on your face. Prepare for your introduction and basic questions beforehand.

prepare your introduction and resume well. Interviewer mostly asks questions based on resume only like your project, internsh
of interest.

NA

IF POSSIBLE, DO MOCK INTERVIEWS WITH YOUR BATCHMATES OR JUST TURN ON YOUR WEBCAM AND TRY TO GI
ANSWERS TO QUESTIONS WHICH YOU HAVE PREPARED/ YOU THINK WILL BE ASKED

Just show your interest for this company in front of interviewer it is not necessary to answer all the question in interview. it is a g
company to start your career.
Be confident and be you no need to exaggerate

If you are appearing for Thermax you should have complete grip on your thermal engineering subjects and you should also hav
spontaneous to answer out of the box HR questions.

Gp through through company sites, gey to know what the company is doing, what are the different project, products the supply.
your seniors about their interview experience. They my help you in preparation about the specific company.

Interview will be at Delhi, in their Head office. They are very strict with the document verification method.
There will be two round, one is Group discussion which is not a elimination round and other is a personal interview. The intervie
Technical. There requirements are the candidates with stong Technical background.

Just prepare resume

I would suggest to have the complete knowledge about the projects and the skills mentioned in the resume.

I appeared for interviews with 2 to 3 companies and noticed that almost all of them focused primarily on concrete, steel, and ce
most of the questions being based on basic concepts — so make sure to clear all the basic concepts related to these topics.

Be confident and keep yourself motivated in the placement journey.

no

Be calm, the questions can be tricky but if you know the answer, take your time. Also be prepared because even though it was
interview, he asked to code by screen share, asked to write pseudocode on white board. Do prepare about every project which
written on your CV.

Learn various software and gain practical insights.

Be confident and try to answer every question.Stay updated with new technologies.Prepare your resume well and be strong wit
projects.

Be honest during the interview (if you don't know anything then just say "sorry sir/Mam I can't recall now") and also be confiden
your hope

Keep faith in yourself, and give interview with confidence.

Prepare DSA and whatever projects and internships you are mentioning in the resume.

Keep track of new technologies (atleast a basic idea ) and also gather some info about the role you are applying for

You should know everything that's written on your resume and communication skills plays a major role in the interview
Be confident during the whole interview/placement process.

If you are preparing for banking sector, add atleast one project related to banking.

Just give your answer with full confidence and Approach correctly.

Be well versed in whats mentioned in your CV

Focus on DSA and RDBMS. Build a consistent tech stack you can flex in interviews — maybe something they require. Also, ma
CGPA above 8 (must). Don’t ignore co-curriculars either.

Prepare Throughly

Prepare well according to role

practise SQL !! Work on resume's project

Keep trying for each and every opportunity .

Practice dsa on leetcode and mock interviews are most important. Very very important. Use pramp exponent platform for mock
You can have free peer interviews there.

Stay Confident and don't lose hope

Work on good projects, strengthen your DSA skills

Go through the current techs , AI and company details

Do prepare for DA (Data Analytics) companies as well; it won't take much time. Apply to every company you're interested in. Al
for all alternatives like off-campus placements, or higher studies such as GATE or CAT. Placements are very unpredictable, so
throughout the year but stay active on every platform. In your final year, as academics are typically more relaxed, you'll have a
invest in developing skills and adding them to your CV. It's always better to have good knowledge of all basic software/applicati

INTERVIWER WILL BE ASKING YOU YOUR FAVORITE SUBJECTS ,LIKE YOU SHOULD PREPARE SOME OF SUBJECTS
STRONG HOLDS (CONCRETE TECHNOLOGY ,SOM ,STRUCTURE )
Would you like to share any additional information?

NA

No

No

Nothing

NA

No

All the best for your future

Person who was taking interview was unaware of cg of electrical branch students. He was expecting to have cg may be more th
N/A

Talk to senior before appearing for placement.

Believe in your skills.

Everything was well and good . Thankyou

For the OA segment, both tests are at a manageable difficulty level, so thorough preparation is advised. Following this, the HR

Winjit process - 1) Hr 2) Tech 3) Tech + Hr

Always stay connected with your T&P coordinator for any queries, but reach out only for genuine help without disturbing them u

Always act professionally and show that you are serious about your career. Focus on upgrading your skill set—the more you im

Stay connected with college resources and understand the expectations of interviewers to align your preparation accordingly. W

All the best, folks—keep pushing forward!

No.

HR round is also held after shortlisting for the first round.They asked just basic questions.

Prepare your resume accordingly and make sure to stress on your involvement in the said resume. The technical is heavily bas

NA.

Make sure to have a good CGPA and technical knowledge. It increases the chances of selection. And high CGPA will surely he

NA

Develop good speaking ability.

Most of the people in final year don't give GATE, but my suggestion is to prepare for gate also because in the gate you focus m

They had nog asked any core subject. Just prepare everything written on your CV and also be prepared to have questions on y
The entire placement process can be more transparent.

none

Nope

No

None

MNGL is a good choice to begin your career in oil and gas sector and it will definitely give you edge over others as it is a joint v
maharatna companies.

No

Please do study on aptitude test also

The don't focus more on your CV.

-

You can also explain in hindi

No

Clear your basic in thermal engineering and disease cycle

None

In HR round main focus was on if you are flexible and adapt according to work conditions.

NA

WHAT IS SUSTAINABLE MINING AND YOUR VIEWS ON THAT

ARE YOU READY TO RELOCATE TO REMOTE AREAS (ANSWER : YES!!)
VARIOUS M/C 'S USED IN OC AND UG
WHAT ARE THE STANDARDS OF VENTILATION (CMR 2017 , REGUALTION 153)

Yes, interviewer will try to scare you that u have to work at extreme abnormal conditions like high temperature, high cold and e
also but Don't Change your answer say "Yes i will work because i am a civil engineer."
.

The online test of Thermax was very difficult to crack.

You should be prepared with each and every question they ask you based on your resume. Make sure to know the the specific
so that interviewer doesn't get chance to cross-question.

EIL always focus more on Technical knowledge for the interview, along with it they focus on other needs like communication, st
problem-solving ability, etc. Be prepared with your Internship and Projects.

No

Try to have some good projects in your resume.

Getting placed doesn’t solely depend on your knowledge; luck also plays a significant role. So stay consistent and confident, ev
rejections.

Interview experience is good and interview is properly organised by training and placement department.
no

Do read about the company so that you can be aware about the company and can answer accordingly. This makes a good exp
have a good knowledge of company.

NA.

Gather some info abt the company and learn everything abt your projects.

No

no

No

Be thorough with the resume

And also they asked whether I'm having any idea about machine learning

Explain your projects clearly

Prepare a well mannered introduction before interview

Be prepared, do analysis from Glassdoor & related websites for the company for which you will be giving an interview. Never be
before an interview.

No

No

Use LeetCode, FreeCodeCamp, and try to give coding contests in between. Mock interviews also help a lot. Build a consistent
flex in interviews.

Whole Interview Transcipt : https://drive.google.com/file/d/1KHOr7okaOpuKx_CxUbIJwubl2bra8_K0/view?usp=drive_link

Nothing

NA

No
While writing code snippet don't be silent. Explain and keep talking to interviewer about every line you write and your thought pr
you even if u don't know the correct code but you know about the idea of it.

Revise basics properly

N.A

reasearch about the company, prepare well for HR

About Core Subjects: Get well-prepared with all important subjects: Heat Transfer (HT), Mass Transfer (MT), Thermodynamics
Fluid Mechanics (FM). Also, try to give the GATE exam.

About HR: There isn't much variation in HR questions. You can find a list of common questions on the internet or on YouTube.
prepare them early on, note down your answers, and then you won't have to prepare for them individually for every company. Y
revise and make small changes as needed

FOR ONLINE TEST AND INTERVIEW YOU CAN PRACTICE QUESTION FROM (INDIA BIX)
 Additional Comment

pa in EEE branch.
w primarily evaluates communication skills and critical thinking abilities.

sarily. Even if you don’t secure a placement immediately, maintain contact with your training and placement officer, as networking can open

he better your chances of landing a great job, regardless of market conditions.

d, stay consistent, and believe in yourself.

our resume.

use they are asked less questions in interview because people assume that you have good knowledge due to the high gpa

he core subjects which indirectly helps in your placement also. So give attempt for GATE also for safe side
None

I am grateful to TnP section for giving me this opportunity to work in Mangal. Work on your shortcomings, and have faith in TnP

No

Be confident about yourself

Prepare your core subjects properly.

there were a lot of questions from all the subjects I mentioned above. I selected most prominent ones. My interview lasted long

All the best

No

Ask question at the end and all the best

None

NA

NA

NA

Thanks
.

Total 3 rounds
1. 2 rounds of 1st containing Online Assessment containing aptitude, Verbal and a lengthy heat transfer question
2 round of assessment contains all out of the box questions, you can use any AI tool, all internet access. Example question: yo
using any tool you want.

2. Technical + HR round
3. Technical + HR round with the President or CEO.

Thermax is a very good company. Keep your preparation high. All the best.

Most of the things I have mentioned above. And do contact with the seniors for help. They will help you how to do the preparati

No

Be confident during the Interview and try to answer the questions to the point.

Focus on strengthening your basics and improve your communication skills — they matter a lot during interviews.

Nice experience
no

The interview was of 30 minutes but mostly 7-8 questions were asked so you don't have to be in a hurry.

NA.

They are testing our communication skills and how good we are at interacting with people and how interested are we in learning
you are enthusiastic abt learning new things.

No

Those who have participated in this selection process have the msg regarding on campus derive just one day before that too in
this on superset and the student tnp coordinator in our class had not given any information regarding it...
please consider it as some students were not able to appear in this drive due to their prior engagements.

No

Ability to handle different situations was tested during the interview

Be confident
Nope

Best of luck, after all luck matters.

No

No

Nothing Just all the best! Thank TNP

All Other Interview Transcipts of which I appeared: https://drive.google.com/file/d/1KHOr7okaOpuKx_CxUbIJwubl2bra8_K0/vie

Nothing

NA

All the best for placements .

Be very very confident. A confident guy with less skills has more chances of selection than a undeconfident skillfull

Strong basics and confidence will help you to crack Interview

N.A

Be confident, explain well

Thats all. Best Wishes

TRY TO HIGHLIGHT YOUR STRONG SUBJECTS BY GIVING SOME HINT IN YOUR INTRODUCTION ABOUT YOUR STRO