Air service units

Series Airplus

► Filter regulators (E - EM - EW - EP - EZ)

► Filter - diaphragm pressure regulator with relieving

► Available in 4 sizes with flow rates up to 8000 nl/min and connections from 1/8” to 1”
► Low histeresis rolling diaphragm and balanced spool
► Filtering element made of HDPe available in 3 different filtration grades (5μm, 20μm and 50μm)
► Bowl assembly via bayonet type quick coupling mechanism with safety button
► Semi-automatic or automatic drain
► Available in four pressure ranges up to 12 bar
► Fitted with panel mounting locking ring
► Available with pressure gauge or digital pressure switch integrated
► Atex certification (ii 2GD or ii 3GD)

2 ► inlet pressures up to 20 bar

Note
For installations where a more accurate and constant pressure is required, the unit
1 2 1 2 should be installed as close as possible to the point of use. in order to ensure that any
fluid discharged by the auto drain assembly is adequately drained away, it is
AIR TREATMENT

recommended you use a 6mm fitting and tube.

Technical characteristics
Size Size 1 Size 2 Size 3 Size 4
technopolymer body, integrated technopolymer connections (t version)
/
Body and connections type technopolymer body, metal connections (n version)
/ Aluminium body, integrated aluminium connections (P - L versions)
technopolymer protection - PA bowl
technopolymer protection - Pc bowl
Protection and bowl type Metal protection - PA bowl
/ Metal protection - Pc bowl
Metal bowl (blind metal bowl)
t version G1/4” G3/8” G1/2”
not available
in / OUt connections n version G1/8” - G1/4” - 1/4 nPt G3/8” - G1/4” - 3/8 nPt G3/8” - G1/2” - 1/2 nPt
P and L versions not available G3/8” - 1/4 nPt G1/2” - 1/2 nPt G1” - 1 nPt
Stand alone
Panel mounted
Assembly configuration
With fixing bracket
/ Panel mounted
Assembly positions vertical ±5°
5 μm
Filter pore size 20 μm
50 μm
Bowl capacity 18 cm 3 34 cm 3 68 cm 3 90 cm 3
Semi-automatic
condensation drain
Automatic
0-2 bar
0-4 bar
Pressure range
0-8 bar
0-12 bar (P2 max 10 Bar in case of digital pressure switch selection)
Manul push and lock with pressure
regulation
Manual lockable with accessories
G1/8” - 1/8” nPt pressure gauge connection port (only for versions with in / OUt nPt connections)
Pressure measurement integrated pressure gauge (optional)
Digital pressure switch (optional)
G1” metal / 35nm
/
G1/2” metal 30nm
G1/4” metal 20nm
/
Max. fittings torque in / OUt G1/8” metal 15nm /
connections G3/8” metal 25nm /
/
G1/2” technopolymer 22nm
/
G1/4” technopolymer 9Nm
/
G3/8” technopolymer / 16Nm
G1/8” metal: 15nm
Max.fitting torque pressure gauge connection port
G1/8” technopolymer: 4nm

Operational characteristics
Size Size 1 Size 2 Size 3 Size 4 Size 1 Size 2 Size 3 Size 4
condensation drain Semi-automatic Automatic
13 bar 10 bar
Maximum working pressure
/ 20 bar (only with body and metal bowl) / 16 bar (only with body and metal bowl)
Minimum working pressure 0,5 bar 0,5 bar
-5 °c ... +50 °c
Working temperature -30°c ... +80°c (only for P version and metal bowl) -5 °c ... +50 °c
/
-40°c ... +80°c (only for L version and metal bowl)
Working temperature with digital pressure switch 0 °c ... +50 °c

2 | 22 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice

04_TRATTAMENTO-ARIA.indd 22 20/11/2024 17:35:57

 Air service units
Series Airplus

Weights
Size Size 1 Size 2 Size 3 Size 4
Fully technopolymer version 210 g 410 g 500 g /
Technopolymer body version, aluminium bowl protection and
/ 440 g 600 g /
technopolymer bowl
Technopolymer body version, aluminium bowl / 460 g 660 g /
Aluminium body version, technopolymer protection and bowl / 480 g 710 g 1460 g
Aluminium body version, aluminium bowl protection and
/ 510 g 730 g 1600 g
technopolymer bow
Aluminium body version and aluminium bowl / 560 g 790 g 1620 g

Materials
Exploded sectioned

2
2
Filter regulator
Polyamide
11 1 Body
Die-cast aluminium
10 2 Adjusting knob Polyamide

s
Polycarbonate
3 Technopolymer bowl
9 Polyamide
Metal bowl Die-cast aluminium
4
Bowl protection Polyamide - Die-cast aluminium
5 Filtering element Polyethylene
1
6 Baffle Acetal resin
7 Spool support Acetal resin
6 8 Filtering element support Acetal resin
9 Diaphragm NBR
7 10 Panel mounting locking ring Polyamide
11 Adjusting spring Steel
5

3-4

Design

Size 1 - Size 2 - Size 3 Size 1 - Size 2 - Size 3 Size 4

Technopolymer protection Protection / Metal bowl All versions

Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
2 | 23

04_TRATTAMENTO-ARIA.indd 23 20/11/2024 17:35:59

 Air service units
Series Airplus

Coding: V17TEO1SRCO2O3O4O5

VERSION
N = Technopolymer body and metal inserts (not available for size 4)
V T = Technopolymer body and thread (not available for size 4)
P = Aluminum body (not available for size 1)
L = Aluminum body, low temperature (not available for size 1)
SIZE AND CONNECTIONS
1A = Size 1 - G1/8” only for N version
1B = Size 1 - G1/4” only for T - N versions
1C = Size 1 - 1/4” NPT only for N version
2A = Size 2 - G1/4” only for N version
2B = Size 2 - G3/8” for all versions
T 2C = Size 2 - 3/8” NPT only for N version - 1/4” NPT only for P - L versions
3A = Size 3 - G3/8” only for N version
3B = Size 3 - G1/2” for all versions
3C = Size 3 - 1/2” NPT only for N - P - L versions
4B = Size 4 - G1” only for P - L versions
4C = Size 4 - 1” NPT only for P - L versions
PRESSURE MEASUREMENT OPTIONS
= G1/8” - 1/8” NPT thread (Only for P - L versions with metal body and NPT thread)

2 O 1
M = Integrated pressure gauge (not available on NPT, size 2 and size 3 aluminum body)
W = Integrated pressure gauge Right - Left (not available on NPT, size 2 and size 3 aluminum body)
P = Digital pressure switch (not available on NPT, size 2 and size 3 aluminum body)
Z = Digital pressure switch Right - Left (not available on NPT, size 2 and size 3 aluminum body)
FILTER PORE SIZE
A = 5 μm
s

S B = 20 μm
C = 50 μm
PRESSURE RANGE
A = 0 - 2 bar
R B = 0 - 4 bar
C = 0 - 8 bar
D = 0 - 12 bar
CONDENSATION DRAIN
C = Semi-automatic drain
S = Automatic drain
RELIEVING OPTIONS
O2 = With reliving
L = Without relieving
KNOB OPTIONS
= Non-lockable version
O 3
K = Lockable version
U = Lockable version with universal key
DIGITAL PRESSURE SWITCH OPTIONS
A = Cable 150 mm + M8 PNP
O4 B = Cable 150 mm + M8 NPN
C = Cable 2 m PNP
D = Cable 2 m NPN
BOWL OPTIONS
= Technopolymer protection - PC bowl
N = Technopolymer protection - PA bowl
O 5
P = Metal protection - PC bowl (not available for size 1)
R = Metal protection - PA bowl (not available for size 1)
T = Metal bowl (not available for size 1)

Example: T173BEMBDST: Size 3 filter regulator G1/2” 20 μm 0 - 12 bar, automatic drain and
metal bowl

2 | 24 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice

04_TRATTAMENTO-ARIA.indd 24 20/11/2024 17:36:00

 Air service units
Series Airplus

Characteristic curves

Flow rate curves Adjustment characteristic

Size 1 - G1/4", 0-8 bar, P1=7 bar

7 7

6 6
Flow Q=34 Nl/min
Downstream pressure (bar)

Downstream pressure (bar)

5 5

4 4
Flow Q=22 Nl/min
3 3

2 2 Flow Q=15 Nl/min

1 1

0 0

2
0 200 400 600 800 1000 1200 1400 1600 1800 0 1 2 3 4 5 6 7 8 9 10
Flow (Nl/min) Inlet pressure (bar)

Size 2 - G3/8", 0-8 bar, P1=7 bar

s
7
7

6
6 Flow Q=78 Nl/min

5
Downstream pressure (bar)

Downstream pressure (bar)

5

4 4
Flow Q=50 Nl/min

3 3

2 2 Flow Q=33 Nl/min

1 1

0
0 500 1000 1500 2000 2500 3000 0
0 1 2 3 4 5 6 7 8 9 10
Flow (Nl/min) Inlet pressure (bar)

Size 3 - G1/2", 0-8 bar, P1=7 bar

7
7

6 6 Flow Q=138 Nl/min

5
Downstream pressure (bar)

Downstream pressure (bar)

4 4
Flow Q=90 Nl/min
3 3

2 Flow Q=60 Nl/min

2

1 1

0
0 1000 2000 3000 4000 5000 0
0 1 2 3 4 5 6 7 8 9 10
Flow (Nl/min) Inlet pressure (bar)

Size 4 - G1", 0-8 bar, P1=10 bar

7 3
Q=10% Qmax.= 1600 dm3/min (ANR)
6

5
Downstream pressure (bar)

Downstream pressure (bar)

2,5

3 Q=2% Qmax.= 320 dm3/min (ANR)

2
2

0 1,5
0 2000 4000 6000 8000 10000 12000 0 1 2 3 4 5 6 7 8 9 10
Flow Q [dm3/min] (ANR) Inlet pressure (bar)

Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
2 | 25

04_TRATTAMENTO-ARIA.indd 25 20/11/2024 17:36:01

 Air service units
Series Airplus

Dimensions
Pressure gauge connection port and Fixing holes dimension detail
semi-automatic drain version (only for size 4)

B1 B3
B2
L3

L9
D3
D4
L2

L8
D4

D1
L4
D2
L1

2
L5
s

L1 - Bowl material
Model B1 B2 B3 D1 D2 D3 D4 L2 L3 L4 L5 L8 L9
Technopolymer Metal
G1/8”
G1/8”
#171... 48 21 42 G1/4” M30x1,5 / 148 / 27,5 54 55 40 / /
1/8” NPT*
1/4" NPT
G1/4”
G3/8” G1/8”
#172... 62 28,5 57 M42x1,5 / 169.1 171,5 34 71,8 68 50 / /
1/4" NPT 1/8” NPT*
3/8" NPT
G3/8”
G1/8”
#173... 73 32,5 65 G1/2” M42x1,5 / 207,2 209,5 40 72,8 80 65 / /
1/8” NPT*
1/2" NPT
G1” G1/8”
#174... 99 44 88 M54x1,5 8,5 262 264,5 52,5 87,5 105 103 25 70
1" NPT 1/8” NPT*

*(only for P - L versions and NPT connections)

Variable dimensions

Integrated pressure gauge version Integrated digital pressure switch version

B3 B3
B2 B2
L6
D1

D1

L7

D6

D6 - Type of digital pressure L7 - Type of digital pressure

B3
switch switch
Model B2 D1 L6
With pressure With digital
A-B C-D A-B C-D
gauge pressure switch
G1/8”
#171.. 21 48,5 60 G1/4”
1/4” NPT
G1/4”
G3/8”
#172.. 28,5 62,5 73,5
1/4” NPT 3 x 0,129 mm, Ø 4
3/8” NPT M8 - 3 PIN 15 150 2000
mm
G3/8”
#173.. 32,5 70,5 81,5 G1/2”
1/2” NPT
G1”
#174.. 44 90,5 101,5
1” NPT

2 | 26 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice

04_TRATTAMENTO-ARIA.indd 26 20/11/2024 17:36:04

 Air service units
Series Airplus

Variable dimensions
Semi-automatic drain version Automatic drain version

L8
L8

D7 D7

2
L8 - Bowl material
Model D7
Technopolymer Metal
Semi-automatic drain 15,7 18 Plastic hose connector Ø6
Automatic drain 2 4,5 G1/8"

Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice
2 | 27

04_TRATTAMENTO-ARIA.indd 27 20/11/2024 17:36:05