General Service Ball Valves, GB Series 1

swagelok.com

G e ne ral Se r vice Ball Valve s

GB Se r ie s
■ Working pressures up to 6000 psig (413 bar) with temperatures from –40 to 250˚F (–40 to 121˚C)

■ Swagelok® tube fitting end connections in fractional (3/8 in. to 1 in.) and metric (12 mm to 25 mm),
female pipe end connections in fractional (3/8 in. to 1 in.)
■ Corrosion-resistant body materials: 316/316L, Alloy 2507, 6-Moly, Alloy 625, Alloy 825, Alloy C-276

■ Mechanically locked end screw design (patent pending) provides increased safety

■ Optional API 607 for fire-safe applications and NACE MR0175/ISO 15156 for sour gas
2 General Service Ball Valves, GB Series

Contents
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . 8
Important Information About Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Swagelok General Service Ball Valves . . . . . . . . . . . . . . 2
Cleaning and Packaging . . . . . . . . . . . . . . . . . . . . . . . . 9
Pressure-Temperature Ratings . . . . . . . . . . . . . . . . . . . 3
Low Fugitive Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Materials of Construction . . . . . . . . . . . . . . . . . . . . . . . 4
Process Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ISO 5211-Compliant Pneumatic Actuators . . . . . . . . . . . 10
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Features
■ Body seals designed for hydrostatic system proof testing up to 1.5 × maximum rated pressure
■ Valve bodies feature a bolt pattern that can be used for optional lockout, panel mount, and a bracket compatible with ISO
5211 pneumatic actuator to reduce inventory levels and provide installation flexibility
■ Mechanically locked (crimped) end screw design (patent-pending) to avoid accidental disassembly and increase safety

Before crimping

After crimping

Important Information About Swagelok General Service Ball Valves

• Swagelok general service ball valves are designed to be operated in a fully open or fully closed position.
• A packing adjustment may be required periodically to increase service life and to prevent leakage.
• Valves that have not been cycled for a period of time may have a higher initial actuation torque.

swagelok.com
 General Service Ball Valves, GB Series 3

Swagelok General Service Ball Valves

316 stainless steel lever handle
with sleeve gives improved
corrosion resistance

Floating ball design achieves

positive seat seal from low
through fully rated pressures

PEEK seat and metal

body seal design without Full bore design provides flow
elastomers allows with no restrictions through
for improved system body or ball
compatiblity

Stem springs
Directional stem flats
compensate for
show open or closed position
changes in pressure,
temperature, and wear

Grounding spring
grounds stem to provide
continuity for antistatic
protection

Live-loaded, 2-piece
chevron stem packing
■R equires less operating torque
■ Improves performance
■C ompensates for stem wear

Bottom-loaded stem PEEK stem bearing

■ Prevents stem blowout ■P rovides smooth actuation
■E  nhances system safety ■E liminates galling between
valve stem and body
■ Resists wear

Pressure-Temperature Ratings
Alloy
316/316L Alloy 2507 Alloy 625 Alloy 825 6-Moly C-276
Temperature, °F (°C) Working Pressure, psig (bar)
–40 (–40) ➀ to100 (37) 6000 (413) 6000 (413) 6000 (413) 6000 (413) 6000 (413) 6000 (413)
200 (93) 5190 (357) 5981 (412) 6000 (413) 5510 (379) 5800 (399) 5472 (377)
250 (121) 4935 (340) 5818 (400) 6000 (413) 5369 (369) 5535 (381) 5263 (362)
➀ Seal and survive to –58°F (–50°C), actuation not permitted below –40°F (–40°C). See PTR-5024,
Low Temperature Thermal Cycle Test of Swagelok ® 8GB and 16GB Series General Service Ball Valves.
Pressure ratings for valves with Swagelok tube fitting ends may be lower due to the tubing pressure rating. Refer to
Swagelok Tubing Data, MS-01-107 for additional information.
Ratings are based on ASME Code for Pressure Piping B31.3, Process Piping and ASME B31.1, Power Piping.
The rating for AGB Fire Safe valves with Grafoil® packing has a minimum temperature of –20°F (–28°C).

swagelok.com
4 General Service Ball Valves, GB Series

Materials of Construction
Valve Body Materials
316/316L Alloy 2507 Alloy 625 Alloy 825 6-Moly Alloy C-276
Component Material Grade/ASTM Specification
1 Stem nut (2) 316 SS
2 Stem springs (3) 316 SS/A249
3 Stop plate
316 SS/A240
4 Handle
5 Handle sleeve Vinyl
6 Grounding spring 316 SS/A313
7 Gland PTFE-coated 316 SS/B783
8 Packing support Polyetheretherketone (PEEK)
9 Top packing
10 Bottom packing
Polyetheretherketone (PEEK)➀
11 Stem bearing
12 Seats (2)
316/316L SS
13 Stem 625/B446/B574 625/B446/B574 625/B446/B574 625/B446
A276
14 Body 316/316L SS 6MO
C276/B574
15 End screw(s) A276 and A479 A479 and B691
2507/A479 625/B446 825/B425
316/316L SS
16 Ball 625/B446
A276
Silver-plated Silver-plated Silver-plated Silver-plated Silver-plated Silver-plated
17 End screw gasket (2)
316 SS/A240 C276 C276 C276 C276 C276

Wetted lubricant PTFE-based

Wetted components listed in italics.

➀ Coated with molybdenum disulfide with a hydrocarbon carrier (excluding the 8GB seats).

1
2
3
5

4
6
1
2
2
7
8
9
15 17 12
16 12 10
14

2-Piece Body

15
17 12
16 12 17 15

3-Piece Body

11

13 14

swagelok.com
 General Service Ball Valves, GB Series 5

Ordering Information
Build a GB series ball valve ordering number by combining the designators in the sequence shown below.

Standard 1 2 3 4
SS - 8GB S 8
Two different end
connections with 1 2 3 4 5 6 7
options
6MO - 16GB S 25MM - F 16 - JLW20YW
Note: Dashes are removed from right to left until 25 characters are achieved in the part number.

Two different
end connections 1 2 3 4 5 6 8
with options and
pneumatic actuator SS - A8GB F 8 - S 8 - A60C6

1 Material 4 End Connection 1 Size 7 Valve Options

(Refer to Materials of Construction 6 = 3/8 in. (8GB only) (Note: If selecting more than one option,
on page 4.) 8 = 1/2 in. (8GB only) designators must be in alphabetical order.)
SS =316/316L SS 12 = 3/4 in. None = Standard (black handle sleeve)
6MO =6-Moly 16 = 1 in. (16GB only) BL = Blue handle sleeve
2507 =Alloy 2507 12MM = 12 mm (8GB only) GR = Green handle sleeve
625 =Alloy 625 16MM = 16 mm (8GB only) JK = Oval handle (orange is standard)
825 =Alloy 825 18MM = 18 mm JL = Lever handle with locking bracket
HC =C-276 20MM = 20 mm (panel mount for 8GB only)
22MM = 22 mm (16GB only) JLK = Oval handle with locking bracket
2 Configuration 25MM = 25 mm (16GB only) PT, W3, W20 = Production tests
8GB = GB valve with 1/2 in. bore (see page 9)
16GB = GB valve with 7/8 in. bore 5 End Connection 2 Type RD = Red handle sleeve (standard for
A8GB = 8GB (API 607) (Required only if different from End A8GB and A16GB)
A16GB = 16GB (API 607) Connection 1 Type.) SG = Alloy 400 ball and stem
S = Swagelok tube fitting (625 stem for API 607 valves)
F = Female NPT selected in accordance with
3 End Connection 1 Type MR0175/ ISO 15156 (SS only)
FK = Swagelok medium pressure
S = Swagelok tube fitting F_RT = Female ISO/BSP (replace YW = Yellow handle sleeve
F = Female NPT underscore with size)
FK = Swagelok medium pressure MS = SAE straight 8 Pneumatic Actuator Options
F_RP = ISO/BSP parallel thread
(Refer to ISO 5211-Compliant
(replace underscore with size)
Pneumatic Actuators on page 10.)
F_RT = Female ISO/BSP (replace 6 End Connection 2 Size
underscore with size) (Required only if different from End
MS = SAE straight Connection 1 Size.) Sour Gas Valves
6 = 3/8 in. (8GB only) GB series valves are available for sour
8 = 1/2 in. (8GB only) gas service. Alloy 2507, 6-Moly, alloy
12 = 3/4 in. 625, alloy 825, and alloy C-276 utilize
16 = 1 in. (16GB only) materials in accordance with NACE
12MM = 12 mm (8GB only) MR0175/ISO15156 as standard. No
16MM = 16 mm (8GB only) special designator is required.
18MM = 18 mm The standard 316/316L SS valve uses
20MM = 20 mm a 316/316L body and end screws
22MM = 22 mm (16GB only) in accordance with NACE MR0175/
25MM = 25 mm (16GB only) ISO15156. For a SS valve with all
wetted materials in accordance with
NACE MR0175, an alloy 400 ball and
stem (alloy 625 stem for API 607 valves)
are used and can be ordered by adding
-SG to the SS valve ordering number.
Example: SS-8GBF8-SG

swagelok.com
6 General Service Ball Valves, GB Series

Dimensions
Dimensions, in inches (millimeters), are for reference only and are subject to change.

Swagelok Tube Fitting End Connections 1/2 in. Female Pipe Thread End Connections
Dimensions are shown with Swagelok nuts finger-tight. See (two-piece body)
Ordering Information on page 5. Female NPT pipe thread dimensions are based on ASME
B1.20.1. See Ordering Information on page 5.

H H

E E
F
F

J
J
G
G

D
C D D1
C

Bolt Pattern and Panel Mount Template Handle Closed

(For Use with Locking/Panel Mount Handle [-JL])
2.05
(52.0)

0.56
(14.3)

0.83 (21.1) hole

4 holes for
1/4 in. dia bolt

swagelok.com
 General Service Ball Valves, GB Series 7

Dimensions
Dimensions, in inches (millimeters), are for reference only and are subject to change.

End Connection Dimensions, in. (mm)

Orifice
Type Size Ordering Number in. (mm) C D D1 E F G H J
0.281 5.55 2.77 2.35 1.79 1.13 4.50 2.17
3/8 in. SS-8GBS6 2.5 –
(7.1) (141) (70.4) (59.7) (45.5) (28.6) (114) (55.0)
0.41 5.78 2.89 2.35 1.79 1.13 4.50 2.17
1/2 in. SS-8GBS8➁ 7 –
(10.4) (147) (73.4) (59.7) (45.5) (28.6) (114) (55.0)
Fractional
0.516 5.77 2.89 2.35 1.79 1.13 4.50 2.17
Swagelok 3/4 in. SS-8GBS12➁ 10 –
(13.1) (147) (73.3) (59.7) (45.5) (28.6) (114) (55.0)
Tube Fitting
0.620 6.92 3.46 2.94 2.52 1.50 6.00 2.93
3/4 in. SS-16GBS12 15 –
(15.7) (176) (87.9) (74.7) (64.0) (38.1) (152) (74.3)
0.875 7.26 3.63 2.94 2.52 1.50 6.00 2.93
1 in. SS-16GBS16 40 –
(22.2) (184) (92.2) (74.7) (64.0) (38.1) (152) (74.3)
Swagelok 0.56 5.44 2.72 2.94 2.52 1.50 6.00 2.93
3/4 in. SS-16GBFK12 5 –
Medium- (14.2) (138) (69.1) (74.7) (64.0) (38.1) (152) (74.3)
Pressure 0.73 5.44 2.72 2.94 2.52 1.50 6.00 2.93
1 in. SS-16GBFK16 10 –
Tube Fitting (18.5) (138) (69.1) (74.7) (64.0) (38.1) (152) (74.3)
0.375 5.77 2.89 2.35 1.79 1.13 4.50 2.17
12 mm SS-8GBS12MM 5 –
(9.5) (147) (73.3) (59.7) (45.5) (28.6) (114) (55.0)
0.50 5.77 2.89 2.35 1.79 1.13 4.50 2.17
16 mm SS-8GBS16MM 10 –
(12.7) (147) (73.3) (59.7) (45.5) (28.6) (114) (55.0)
Metric
0.516 5.77 2.88 2.35 1.79 1.13 4.50 2.17
Swagelok 20 mm SS-8GBS20MM 10 –
(13.1) (147) (73.3) (59.7) (45.5) (28.6) (114) (55.0)
Tube Fitting
0.625 6.92 3.46 2.94 2.52 1.50 6.00 2.93
20 mm SS-16GBS20MM 15 –
(15.9) (176) (87.9) (74.7) (64.0) (38.1) (152) (74.3)
0.875 7.27 3.63 2.94 2.52 1.50 6.00 2.93
25 mm SS-16GBS25MM 40 –
(22.2) (185) (92.3) (74.7) (64.0) (38.1) (152) (74.3)
0.516 3.78 1.89 2.35 1.79 1.13 4.50 2.17
3/8 in. SS-8GBF6 10 –
(13.1) (96.0) (48.0) (59.7) (45.5) (28.6) (114) (55.0)
SS-8GBF8➀ 0.516 3.37 1.89 1.48 2.35 1.79 1.13 4.50 2.17
1/2 in. 10
(2-piece body) (13.1) (85.0) (48.0) (37.6) (59.7) (45.5) (28.6) (114) (55.0)
Female NPT 0.516 4.58 2.29 2.35 1.79 1.13 4.50 2.17
3/4 in. SS-8GBF12➁ 10 –
Pipe Thread (13.1) (116) (58.1) (59.7) (45.5) (28.6) (114) (55.0)
0.875 4.98 2.49 2.94 2.52 1.50 6.00 2.93
3/4 in. SS-16GBF12 40 –
(22.2) (127) (63.3) (74.7) (64.0) (38.1) (152) (74.3)
0.875 5.44 2.72 2.94 2.52 1.50 6.00 2.93
1 in. SS-16GBF16➂ 40 –
(22.2) (138) (69.1) (74.7) (64.0) (38.1) (152) (74.3)

Female ISO/
0.516 3.78 1.89 2.35 1.79 1.13 4.50 2.17
BSP Tapered 1/2 in. SS-8GBF8RT 10 –
(13.1) (96) (48) (59.7) (45.5) (28.6) (114) (55.0)
Pipe Thread
0.516 3.78 1.89 2.35 1.79 1.13 4.50 2.17
1/2 in. SS-8GBMS8 7 –
(13.1) (96.0) (48.0) (59.7) (45.5) (28.6) (114) (55.0)
0.516 4.58 2.29 2.35 1.79 1.13 4.50 2.17
Female SAE 3/4 in. SS-8GBMS12 10 –
(13.1) (116) (58.1) (59.7) (45.5) (28.6) (114) (55.0)
Straight Pipe
Thread 0.875 4.98 2.49 2.94 2.52 1.50 6.00 2.93
3/4 in. SS-16GBMS12 15 –
(22.2) (127) (63.3) (74.7) (64.0) (38.1) (152) (74.3)
0.875 5.44 2.72 2.94 2.52 1.50 6.00 2.93
1 in. SS-16GBMS16➂ 40 –
(22.2) (138) (69.1) (74.7) (64.0) (38.1) (152) (74.3)

➀ The 1/2 in. female NPT pipe thread configuration has a 2-piece body (stainless steel only). All other configurations have 3-piece bodies.
➁ The 8GB valves with 3/4 in. end connections or 1/2 in. diameter and 0.035 in. tube wall will have a slight flow restriction through the valve.
➂ The 16GB valves with 1 in. diameter and schedule 40 or 80 pipe will have a slight flow restriction through the valve

swagelok.com
8 General Service Ball Valves, GB Series

Options and Accessories

Handles

8GB/A8GB Lever 16GB Lever Handle Oval Handle Oval Handle with
Handle with Locking/ with Locking Locking Bracket
Panel Mount Bracket Bracket

A variety of handle options are available for use with GB series ball valves. To
order a lever handle with locking- bracket, add -JL to the ordering number. The
8GB valve can also be panel mounted for a lever handle with locking bracket.
Maximum panel thickness is 0.105 in. (2.67 mm) (12 Gauge sheet metal.)
To order an oval handle, add -JK to the ordering number. Refer to page 5 for
other options.

Locking Handle Bracket Kits

Locking Handle Bracket Kits
Valve Kit Kit Kit
Series Description Contents Ordering Number
(1) Stop bracket
8GB/A8GB lever handle Locking/panel mount (4) Cap screws SS-5DK-8GB-JL
(1) Stop plate
8GB/A8GB oval handle (1) Lockable stop plate SS-5DK-8GB-JLK
Locking (1) Locking bracket
16GB/A16GB lever and oval handles➀ (2) Cap screws SS-5DK-16GB-LH

➀ The temperature range for the 16GB with oval handle is limited to a range of 0°F (–17°C) to 250°F (121°C).

Fire Series (A8GB and A16GB) Option

GB Series valves are offered with a fire safe option that meets the testing
specifications of API 607, 7th edition. This option can be ordered for the 8GB or
16GB by adding an A prior to the valve series and size. With the fire safe option,
a red lever handle, Grafoil packing, and vented ball are standard.
The vented ball allows pressure to equalize between the valve
body and the upstream port, preventing overpressurization and
potential seal blowout under fire conditions. With the vented ball,
the valve is not bi-directional. This option is rated from –20°F to
250°F (– 28°C to 121°C).
Vented Ball
A8GB and A16GB Alternative Materials of Construction

Material Grade/
Component ASTM Specification
Packing supports (2) Polymide
Packing Grafoil with 316 SS wire
Stem bearing(s)➀ Alloy X-750/AMS 5542
Fluorinated tungsten disulfide; molybdenum disulfide with
Lubricants
hydrocarbon binder; nickel antiseize in hydrocarbon carrier
➀ Coated with molybdenum disulfide with hydrocarbon binder.

swagelok.com
 General Service Ball Valves, GB Series 9

Process Options Testing

Every Swagelok general service ball valveis factory tested
Production Tests
in both directions with nitrogen at 1000 psig (69 bar). Seats
To specify an optional production test in have a maximum allowable leak rate of 0.1 std cm 3/min.
addition to the standard testing, add a Shell testing is performed to a requirement of no detectable
designator from the table at right to the leakage with a liquid leak detector.
valve ordering number. Valves with vented balls are only seat tested from inlet to outlet.
Example: SS-8GBF8-PT
Cleaning and Packaging
Test All Swagelok general service ball valves are cleaned and
Designator Production Test Description
packaged in accordance with Swagelok
Valves are tested with nitrogen at a customer-specified catalog,MS-06-62.
pressure. Test pressure must not exceed the rated
-PT
pressure of the valve. Maximum allowable leak rate
depends on test pressure.

Valves are hydrostatically tested with deionized water

at 1.5 times the rated pressure of the valve. No visible
leakage is permitted.
-W20
Fire Series – Note: Due to the valve design, the
maximum rated pressure is decreased to 4000 psig
(275 bar).

Valves are tested for shell and seat leakage to satisfy

the testing requirements of API 598.
-W3 Fire Series – Note: Due to the valve design, the
maximum rated pressure is decreased to 4000 psig
(275 bar).

Low Fugitive Emissions

The American Petroleum Institute’s API 641 tests for fugitive
emissions to atmosphere for quarter turn ball valves. The tests
are conducted at a third party lab and certify that at no point
in the test did the valve leak in excess of 100 ppm of methane.
Certificates stating that the valve is certified for Low Emissions
service are available for the following GB series valves: 8GB
and 16GB. For more information, contact your authorized
Swagelok sales and service representative.

swagelok.com
10 General Service Ball Valves, GB Series

ISO 5211-Compliant Pneumatic Actuators

Pressure-Temperature Ratings
Maximum actuator pressure is 116 psig (8.0 bar). See
Minimum Actuator Pressure table below for minimum
actuator pressures.

Actuator Temperature
Swagelok GB series valve Actuator Service Range
with actuator, solenoid, Service Designator °F (°C)
and proximity sensor. –40 to 176
Standard —
(–40 to 80)
High 5 to 250
HT
temperature (–15 to 121)

These Swagelok rack and pinion pneumatic actuators are

ISO 5211-compliant and are suitable for general applications.
They are available in spring-return and double-acting modes.
On-off (2-way) valves require 90° actuation.
Valve-actuator assemblies on this page are based on a 70
to 250°F (20 to 121°C) system temperature and the valve
cycling at least once per day but not more than once per
hour. For additional information on selecting and sizing
ISO 5211-compliant actuators, refer to Actuated Ball Valve
Selection Guide—ISO 5211-Compliant Actuator Mounting
Bracket Kits catalog, MS‑02‑136.
For other valve body materials or if your application falls
outside of this scope, contact your authorized Swagelok
sales and service representative.
For technical data, including actuator materials of
construction and weight, refer to Ball Valve Actuation Options
catalog, MS‑02‑343.
For additional information on selecting and sizing ISO
5211-compliant actuators, refer to Actuated Ball Valve
Selection Guide—ISO 5211-Compliant Actuator Mounting
Bracket Kits catalog, MS‑02‑136.

Minimum Actuator Pressure

Actuation Mode
Spring Return Double Spring Double
Model Designators Acting Return Acting
Valve Actuator Normally Normally Actuator Model Minimum Actuator
Series Model Closed Open Model Designator Pressure, psig (bar)
8GB A30 -A30C4 -A30O4 A30 -A30D 58 (4.0) 36 (2.5)
A30 -A30C5 -A30O5 A30 -A30D 72 (5.0) 43 (3.0)
A8GB
A60 -A60C3 -A60O3 A60 -A60D 43 (3.0) 36 (2.5)
A30 -A30D — 58 (4.0)
16GB A60 -A60C4 -A60O4
A60 -A60D 58 (4.0) 36 (2.5)
A60 -A60D — 58 (4.0)
A16GB A100 -A100C4 -A100O4
A100 -A100D 58 (4.0) 36 (2.5)

• Caution: Actuated assemblies

must be properly aligned and
supported. Improper alignment
or inadequate support of the
actuated assembly may result
in leakage or premature valve
failure.

swagelok.com
 General Service Ball Valves, GB Series 11

ISO 5211-Compliant Pneumatic Actuators

Ordering Information
Factory-Assembled Valves with Actuators
Typical Ordering Number

A B C
SS-8GBS8 -A30D HT
A Valve Ordering Number B Actuator Model C Actuator Service
Based on valve series, actuation HT = High temperature
mode, and flow pattern, select None = Standard
actuator designator. See Minimum
Actuator Pressure table,
page 10.

Kits for Field Assembly

Order one actuator kit and one mounting bracket kit for each valve.
Actuator Kit Typical Ordering Number

A B C
MS - A30-4 - DIN -HT
A Actuator Model B Coupling Drive Type C Actuator Service
Based on valve series, actuation DIN -HT = High temperature
mode, and flow pattern, select None = Standard
actuator designator. See Minimum
Actuator Pressure table,
page 10, and Actuator Model
Designators table below.

Actuator Model Designators Options for Pneumatic Actuators

Spring Spring Double
Swagelok can provide factory assemblies with pneumatic
Return Return Double Acting actuators, solenoid valves, limit switches, and position
Valve Actuator Model Acting Model sensors, as well as kits for field assembly.
Series Model Designator Model Designator
8GB A30 A30-4 A30 A30-DA Actuator Mounting Kits
A30 A30-5 A30 A30-DA Valve Actuator Kit
A8GB Series Model Ordering Number
A60 A60-3 A60 A60-DA
8GB A30
A30 A30-DA SS-MB-8GB-F05-14DIN-M
16GB A60 A60-4 A8GB A30 or A60
A60 A60-DA
16GB A30 or A60
A60 A60-DA SS-MB-16GB-F05-14DIN-M
A16GB A100 A100-4 A60
A100 A100-DA A16GB
A100 SS-MB-16GB-F05-17DIN-M

Mounting Bracket Kits

Swagelok ISO 5211 mounting bracket kits contain:
■ 316 stainless steel mounting bracket
■ four A4 stainless steel socket head cap screws
(A4 is approximately equivalent to AISI 316.)
■ 316 stainless steel coupling
■ Aluminum coupling sleeve
■ 302 stainless steel coupling spring
■ four 316 stainless 1/4–20 button
head cap screws
■ instructions.

swagelok.com
12 General Service Ball Valves, GB Series

ISO 5211-Compliant Pneumatic Actuators Options for

Dimensions ISO 5211-Compliant and
Dimensions, in inches (millimeters), are for reference only and are subject to
Swagelok Pneumatic
change. Actuators

A
1.57
(39.9)

Swagelok offers a range of accessories

2 mounting
holes to enhance instrumentation and
0.34 (8.7) dia process ball valve performance and
C
control, including solenoid valves, limit
switches, and position sensors. Factory
assemblies and kits for field assembly
are available.
2.00 D Refer to Ball Valve Actuation Options
(50.8)
E catalog, MS‑02‑343, for additional
information.

Oxygen Service Hazards

Dimensions, in. (mm)
Valve Actuator For more information about hazards
Series Model A B C D E
and risks of oxygen-enriched systems,
On-Off (2-Way) Valves refer to Oxygen System Safety
A30 6.04 (153) 5.13 (130) 2.04 (51.8) 2.72 (69.1) 4.63 (118) technical report, MS-06-13.
8GB
A60 8.01 (203) 5.80 (147) 2.04 (51.8) 2.72 (69.1) 4.71 (118)
A60 8.01 (203) 5.80 (147) 2.43 (61.6) 2.72 (69.1) 4.71 (118)
16GB
A100 9.46 (240) 6.31 (160) 2.43 (61.6) 2.72 (69.1) 4.94 (126)

swagelok.com
 General Service Ball Valves, GB Series 13

Safe Product Selection Warranty Information

When selecting a product, the total system design must Swagelok products are backed by The Swagelok Limited
be considered to ensure safe, trouble-free performance. Lifetime Warranty. For a copy, visit swagelok.com or contact
Function, material compatibility, adequate ratings, your authorized Swagelok representative.
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.

• WARNING
Do not mix/interchange Swagelok products or
components not governed by industrial design
standards, including Swagelok tube fitting end Swagelok—TM Swagelok Company
Grafoil—TM NeoGraf Solutions, LLC.
connections, with those of other manufacturers. © 2021-2025 Swagelok Company
MS-02-484, RevF, January 2025

swagelok.com