Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

Product Specification

Product: Indoor Full Color P1.2 1/32 Scan Module

Item No.: S1.2-32S-1010

Version: 2.5

No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

1. Module Picture

Front View Rear View

2. Suggestion Cabinet -(640*480 MGLED )

Front View Rear View

Front Service Rear Service

No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

3. Technical Specification

Pixel Pitch 1.250mm Pixel Density 640000Dots/㎡

Configuration 1R1G1B LED Lamp SMD 1010

Size
320*160*14.5mm Weight 0.52kg±0.01kg
(Width*Height*Depth)

Structure Lamp & IC in same PCB Resolution 256*128=32768Dots

Module
Input Voltage (DC) 4.5±0.1V Maximum Current ≤6.6A
Constant Current
Power Consumption ≤30W Driving Method
1/32 Scan
40A Power Supply for 3-4 pcs module 80A Power Supply for 8 pcs module
40A PFC Power
4-5 pcs module
Supply for
640*480*85mm (with module, cabinet,
Cabinet Size (Width*Height*Thickness)
connecting plate)
Cabinet Pixel Density 512*384=196608 Dots

Cabinet Area 0.307 ㎡

Cabinet
(MGLED) Cabinet Weight 8.32kg ±0.05 kg

Cabinet Max Power Consumption ≤178W

Average Power Consumption (1/3 Max) ≤59W

Distribution Power (Power Supply Capacity 78%) ≤288W

Brightness ≥700cd/㎡ Brightness Uniformity ＞0.95

Horizontal Viewing Vertical Viewing
160 ±10 degree 160 ±10 degree
Angle Angle
Best Viewing Distance ≥1.3 m Black Spot Ratio < 0.0003
Max Power Operation
≤580W/㎡ Indoor
Consumption Environment
14-16bits (RGB
Screen Grayscale Display Color 4398 Billion
each)
Frame Frequency ≥60 frame/sec Refresh Frequency ≥3840 Hz
Computer control, Brightness 256-grade manual /
Control Mode
Point-to-point Adjustment automatic
Life Span ≥100,000 hours Average Failure Free Time ≥10,000 hours
Attenuation
≤15％ Operating Humidity 10％-65％RH
(3 years later)

No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

4.Signal Pin

HUB320 Pin Signal Function Pin Signal Function

1 R1 Red data signal 2 G1 Green data signal
3 B1 Blue data signal 4 GND GND
5 R2 Red data signal 6 G2 Green data signal
7 B2 Blue data signal 8 GND GND
9 R3 Red data signal 10 G3 Green data signal
11 B3 Blue data signal 12 GND GND
13 R4 Red data signal 14 G4 Green data signal
15 B4 Blue data signal 16 GND GND
Line power control
17 A 18 B Line power control signal
signal
Line power control
19 C 20 D Line power control signal
signal
Line power control
21 E 22 GND GND
signal
23 CLK Clock signal 24 LAT Data locking signal
25 OE Enable signal 26 GND GND

5.Precautions
Item Description
Storage temperature range: -10 ° C - 30 ° C, over
30 ° C needs to do cooling treatment.
Operating temperature range: -20 ° C -40 ° C, other
Temperature temperature range, need to install temperature control
Environmen requirement equipment.
tal Lamp surface temperature (working time):
Precautions ≤60°C, temperature control equipment is required to be
installed when temperature exceeding the standard
Storage humidity range: 10% RH-60% RH, humidity over
Humidity
60% RH requires dehumidification treatment.
requirement
Operating humidity range: 10% RH-65% RH, If the

No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

humidity exceeds the standard, it must be dehumidified

before it can be used normally.
If the product has been stored for more than one month,
need to do 6 hours of aging test before it can be used. The
Storage
aging mode is: 10%Full brightness setting-1H, 30%Full
overdue
processing brightness setting-1H, 60%Full brightness setting-2H,
80%Full brightness setting-1H, 100%Full brightness
setting-1H (increase brightness gradually in aging test)
Indoor products have no protection level or IP30, and the
display should not be exposed to heavy dusty
Dust-proof
environments, such as decoration and renovation. Special
requirements
protection is required to protect the display. Installing LED
display screen during decoration is strictly prohibited.
Corrosive gas contains salt or acid gas in the environment,
Avoiding
may cause corrosion of electronic components,
corrosive gas
crystallization, leakage and so on.
The display screen should not be installed in an
Avoiding
environment where electromagnetic radiation and radio
electromagne
frequency radiation exceed the field strength of 5V/m
tic radiation
interference source.
Strong light will affect the display effect and life span of
Avoid strong
screen. It should be install in the direction where there is
light
shorter direct sun shining.
Indoor products have low level of protection, water can
Keep away make the module short circuit, and leads to circuit device
from water damage, so it is necessary to keep away from the water
source.
The metal components of the screen, the shell of power
Electrostatic
supply and the cabinet should be grounded well, and the
hazard，
grounding resistance should be less than 10Ω. Prevent
Prevent
electrostatic damage to electronic devices in humid
lightning
environment, while avoiding electric leakage to harm
strikes
human body.
The angle and height of the display installation should be
Personal appropriate, and the sharp corners should be packaged to
injury prevent damage to the human body from the tough outer
casing.
Display screen for special environment (1, seaside,
swimming pool, bathing room, basement, tunnel; 2,
Special chemical environment, vulcanization environment,
environment halogen environment; 3, dust, dusty environment; 4,
strong ultraviolet environment; 5 , the environment of
strong electromagnetic fields; 6, less than -20 degrees,
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

higher than +40 degrees of the environment),The review

process is required before placing the order.
The worker must wear an anti-electrostatic wrist strap and
Electro-static
anti- electrostatic glove. Various tools must be strictly
Protection
grounded during assembly
Different batches of products cannot be installed in the
Product batch
same screen, otherwise there will be color blocks (mosaic)
control
on the display.
The module cannot be directly connected to 220V, and the
Product
module positive and negative poles connection must be
wiring
right.
Disassembly
Do not throw, push, squeeze or press the module to avoid
and
damaging the display screen.
transportation
Disassembly
Sweat or other liquid cannot be dripped on the display
and
screen during disassembly and assembly operation. If it is
maintenance
dripped, then use alcohol to clean the product, to prevent
liquid
the liquid from corroding the product.
protection
In connection with power supply, it is necessary to ensure
tightening of terminal joint screw to prevent joint position
Installation
from loosening, resulting in wire burning or product
Torque
Operational damage caused by high contact resistance. Torque of M4
Control
precautions screw is 6.0-8.0 Kgf.cm, and that of M3 screw is 4.0-6.0
Kgf.cm.
It is forbidden to assemble the LED module when the
power is
Prohibited on. The LED module should be assembled with the main
work with power
electricity input disconnected. It is not allowed to insert the power
wire
and signal cable when there are with electricity.
It is forbidden for people to touch the LED display screen
Prohibited
when the LED screen is in usage, so as to avoid
touch with
electrostatic breakdown of LED lights and chips and other
electricity
components caused by human body friction.
Temperature and humidity meters should be equipped on
the installation site to monitor the surrounding
Environmenta environment of the screen in time. After heavy rain, it is
l inspection necessary to check whether there are any problems such
as dampness, water droplets and over humidity in the
screen in time.
Requirement Fixed Within 10% ~ 65% RH relative humidity
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

s for moisture Installation range, it is recommended to turn on the

proof Display display 1 time per day, and work at least 4
Screen hours to remove moisture on the display.
When the relative humidity of the
environment is over 65% RH,
dehumidification treatment should be carried
out for the operating environment. It is
suggested to use the screen for more than
8H per day in this environment, and doors
and windows should be closed at night to
prevent the display from dampness.
When the display screen is not used for a
long time, it is necessary to preheat and
dehumidify the whole screen for 8H before
using, so as to avoid damaging the lamp
tube after dampness. The dehumidification
methods are: full brightness set 10%- 1H,
full brightness set 30% 2H, full brightness
set 60% -2H, full brightness set 80% -2H, full
brightness set 100% -1H (brightness
gradually increasing aging).
After usage , immediately put into flight case
and seal the flight case;
In each flight case, please put a desiccant or
hygroscopic bag of not less than 50g.
In the range of 10% to 65% RH relative
humidity, the screen should be lighted on
more than 2H every half month; More than
65% RH and in the resurgence weather, the
screen must be lighted on more than 2H
every week. After finished the display, need
Rental
to put it back to flight case, sealed and
screen
stored. (please check whether there is any
display:
failure of the desiccant or hygroscopic bag in
the aviation, it needs to be replaced every 2
months, and more desiccant can increase
the dryness inside the box.)
When the display screen is not in use for a
long time, it is necessary to reduce the
brightness of the whole screen by 50% in
advance and play it for 12 hours, and
preheat it for "dehumidification" 12H to avoid
damaging the light tube after the LED

No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com
 Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.

screen is damped.

While renting, do not touch the display

screen with water. If there is any water,
make sure that the water on the screen is
dried. After 2H, light the display screen 2H,
and evaporate the water by lamp and IC
heat.
It is strictly forbidden to use indoor rental
screens as outdoor rental screens,
especially in the open air environment.
Avoid It is strictly forbidden to rebuild after the installation of the
construction LED display screen, so as to prevent the LED display
work to the screen from being affected by the impact of high current
installed LED and dust, such as welding, electric saw and other
screen equipment.

No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
E-mail：[email protected] Website: www.qiangliled.com